| # NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py |
| # RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=znver3 -timeline -timeline-max-iterations=2 -register-file-stats -iterations=10000 < %s | FileCheck %s |
| |
| # LLVM-MCA-BEGIN |
| xorps %xmm1, %xmm1 |
| xorps %xmm0, %xmm1 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| xorpd %xmm1, %xmm1 |
| xorpd %xmm0, %xmm1 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| andnps %xmm1, %xmm1 |
| andnps %xmm0, %xmm1 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| andnpd %xmm1, %xmm1 |
| andnpd %xmm0, %xmm1 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| pxor %xmm1, %xmm1 |
| pxor %xmm0, %xmm1 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| pandn %xmm1, %xmm1 |
| pandn %xmm0, %xmm1 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| psubb %xmm1, %xmm1 |
| psubb %xmm0, %xmm1 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| psubw %xmm1, %xmm1 |
| psubw %xmm0, %xmm1 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| psubd %xmm1, %xmm1 |
| psubd %xmm0, %xmm1 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| psubq %xmm1, %xmm1 |
| psubq %xmm0, %xmm1 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| psubsb %xmm1, %xmm1 |
| pxor %xmm0, %xmm1 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| psubsw %xmm1, %xmm1 |
| pxor %xmm0, %xmm1 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| psubusb %xmm1, %xmm1 |
| pxor %xmm0, %xmm1 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| psubusw %xmm1, %xmm1 |
| pxor %xmm0, %xmm1 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| pcmpgtb %xmm0, %xmm0 |
| paddb %xmm0, %xmm0 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| pcmpgtw %xmm0, %xmm0 |
| paddw %xmm0, %xmm0 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| pcmpgtd %xmm0, %xmm0 |
| paddd %xmm0, %xmm0 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| pcmpgtq %xmm0, %xmm0 |
| paddq %xmm0, %xmm0 |
| # LLVM-MCA-END |
| |
| # CHECK: [0] Code Region |
| |
| # CHECK: Iterations: 10000 |
| # CHECK-NEXT: Instructions: 20000 |
| # CHECK-NEXT: Total Cycles: 5004 |
| # CHECK-NEXT: Total uOps: 20000 |
| |
| # CHECK: Dispatch Width: 6 |
| # CHECK-NEXT: uOps Per Cycle: 4.00 |
| # CHECK-NEXT: IPC: 4.00 |
| # CHECK-NEXT: Block RThroughput: 0.5 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 0.25 xorps %xmm1, %xmm1 |
| # CHECK-NEXT: 1 1 0.25 xorps %xmm0, %xmm1 |
| |
| # CHECK: Register File statistics: |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #1 -- Zn3FpPRF: |
| # CHECK-NEXT: Number of physical registers: 160 |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #2 -- Zn3IntegerPRF: |
| # CHECK-NEXT: Number of physical registers: 192 |
| # CHECK-NEXT: Total number of mappings created: 0 |
| # CHECK-NEXT: Max number of mappings used: 0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn3AGU0 |
| # CHECK-NEXT: [1] - Zn3AGU1 |
| # CHECK-NEXT: [2] - Zn3AGU2 |
| # CHECK-NEXT: [3] - Zn3ALU0 |
| # CHECK-NEXT: [4] - Zn3ALU1 |
| # CHECK-NEXT: [5] - Zn3ALU2 |
| # CHECK-NEXT: [6] - Zn3ALU3 |
| # CHECK-NEXT: [7] - Zn3BRU1 |
| # CHECK-NEXT: [8] - Zn3FP0 |
| # CHECK-NEXT: [9] - Zn3FP1 |
| # CHECK-NEXT: [10] - Zn3FP2 |
| # CHECK-NEXT: [11] - Zn3FP3 |
| # CHECK-NEXT: [12.0] - Zn3FP45 |
| # CHECK-NEXT: [12.1] - Zn3FP45 |
| # CHECK-NEXT: [13] - Zn3FPSt |
| # CHECK-NEXT: [14.0] - Zn3LSU |
| # CHECK-NEXT: [14.1] - Zn3LSU |
| # CHECK-NEXT: [14.2] - Zn3LSU |
| # CHECK-NEXT: [15.0] - Zn3Load |
| # CHECK-NEXT: [15.1] - Zn3Load |
| # CHECK-NEXT: [15.2] - Zn3Load |
| # CHECK-NEXT: [16.0] - Zn3Store |
| # CHECK-NEXT: [16.1] - Zn3Store |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions: |
| # CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - xorps %xmm1, %xmm1 |
| # CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - xorps %xmm0, %xmm1 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 01234 |
| |
| # CHECK: [0,0] DeER. xorps %xmm1, %xmm1 |
| # CHECK-NEXT: [0,1] D=eER xorps %xmm0, %xmm1 |
| # CHECK-NEXT: [1,0] DeE-R xorps %xmm1, %xmm1 |
| # CHECK-NEXT: [1,1] D=eER xorps %xmm0, %xmm1 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 2 1.0 1.0 0.5 xorps %xmm1, %xmm1 |
| # CHECK-NEXT: 1. 2 2.0 0.0 0.0 xorps %xmm0, %xmm1 |
| # CHECK-NEXT: 2 1.5 0.5 0.3 <total> |
| |
| # CHECK: [1] Code Region |
| |
| # CHECK: Iterations: 10000 |
| # CHECK-NEXT: Instructions: 20000 |
| # CHECK-NEXT: Total Cycles: 5004 |
| # CHECK-NEXT: Total uOps: 20000 |
| |
| # CHECK: Dispatch Width: 6 |
| # CHECK-NEXT: uOps Per Cycle: 4.00 |
| # CHECK-NEXT: IPC: 4.00 |
| # CHECK-NEXT: Block RThroughput: 0.5 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 0.25 xorpd %xmm1, %xmm1 |
| # CHECK-NEXT: 1 1 0.25 xorpd %xmm0, %xmm1 |
| |
| # CHECK: Register File statistics: |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #1 -- Zn3FpPRF: |
| # CHECK-NEXT: Number of physical registers: 160 |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #2 -- Zn3IntegerPRF: |
| # CHECK-NEXT: Number of physical registers: 192 |
| # CHECK-NEXT: Total number of mappings created: 0 |
| # CHECK-NEXT: Max number of mappings used: 0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn3AGU0 |
| # CHECK-NEXT: [1] - Zn3AGU1 |
| # CHECK-NEXT: [2] - Zn3AGU2 |
| # CHECK-NEXT: [3] - Zn3ALU0 |
| # CHECK-NEXT: [4] - Zn3ALU1 |
| # CHECK-NEXT: [5] - Zn3ALU2 |
| # CHECK-NEXT: [6] - Zn3ALU3 |
| # CHECK-NEXT: [7] - Zn3BRU1 |
| # CHECK-NEXT: [8] - Zn3FP0 |
| # CHECK-NEXT: [9] - Zn3FP1 |
| # CHECK-NEXT: [10] - Zn3FP2 |
| # CHECK-NEXT: [11] - Zn3FP3 |
| # CHECK-NEXT: [12.0] - Zn3FP45 |
| # CHECK-NEXT: [12.1] - Zn3FP45 |
| # CHECK-NEXT: [13] - Zn3FPSt |
| # CHECK-NEXT: [14.0] - Zn3LSU |
| # CHECK-NEXT: [14.1] - Zn3LSU |
| # CHECK-NEXT: [14.2] - Zn3LSU |
| # CHECK-NEXT: [15.0] - Zn3Load |
| # CHECK-NEXT: [15.1] - Zn3Load |
| # CHECK-NEXT: [15.2] - Zn3Load |
| # CHECK-NEXT: [16.0] - Zn3Store |
| # CHECK-NEXT: [16.1] - Zn3Store |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions: |
| # CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - xorpd %xmm1, %xmm1 |
| # CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - xorpd %xmm0, %xmm1 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 01234 |
| |
| # CHECK: [0,0] DeER. xorpd %xmm1, %xmm1 |
| # CHECK-NEXT: [0,1] D=eER xorpd %xmm0, %xmm1 |
| # CHECK-NEXT: [1,0] DeE-R xorpd %xmm1, %xmm1 |
| # CHECK-NEXT: [1,1] D=eER xorpd %xmm0, %xmm1 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 2 1.0 1.0 0.5 xorpd %xmm1, %xmm1 |
| # CHECK-NEXT: 1. 2 2.0 0.0 0.0 xorpd %xmm0, %xmm1 |
| # CHECK-NEXT: 2 1.5 0.5 0.3 <total> |
| |
| # CHECK: [2] Code Region |
| |
| # CHECK: Iterations: 10000 |
| # CHECK-NEXT: Instructions: 20000 |
| # CHECK-NEXT: Total Cycles: 5004 |
| # CHECK-NEXT: Total uOps: 20000 |
| |
| # CHECK: Dispatch Width: 6 |
| # CHECK-NEXT: uOps Per Cycle: 4.00 |
| # CHECK-NEXT: IPC: 4.00 |
| # CHECK-NEXT: Block RThroughput: 0.5 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 0.25 andnps %xmm1, %xmm1 |
| # CHECK-NEXT: 1 1 0.25 andnps %xmm0, %xmm1 |
| |
| # CHECK: Register File statistics: |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #1 -- Zn3FpPRF: |
| # CHECK-NEXT: Number of physical registers: 160 |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #2 -- Zn3IntegerPRF: |
| # CHECK-NEXT: Number of physical registers: 192 |
| # CHECK-NEXT: Total number of mappings created: 0 |
| # CHECK-NEXT: Max number of mappings used: 0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn3AGU0 |
| # CHECK-NEXT: [1] - Zn3AGU1 |
| # CHECK-NEXT: [2] - Zn3AGU2 |
| # CHECK-NEXT: [3] - Zn3ALU0 |
| # CHECK-NEXT: [4] - Zn3ALU1 |
| # CHECK-NEXT: [5] - Zn3ALU2 |
| # CHECK-NEXT: [6] - Zn3ALU3 |
| # CHECK-NEXT: [7] - Zn3BRU1 |
| # CHECK-NEXT: [8] - Zn3FP0 |
| # CHECK-NEXT: [9] - Zn3FP1 |
| # CHECK-NEXT: [10] - Zn3FP2 |
| # CHECK-NEXT: [11] - Zn3FP3 |
| # CHECK-NEXT: [12.0] - Zn3FP45 |
| # CHECK-NEXT: [12.1] - Zn3FP45 |
| # CHECK-NEXT: [13] - Zn3FPSt |
| # CHECK-NEXT: [14.0] - Zn3LSU |
| # CHECK-NEXT: [14.1] - Zn3LSU |
| # CHECK-NEXT: [14.2] - Zn3LSU |
| # CHECK-NEXT: [15.0] - Zn3Load |
| # CHECK-NEXT: [15.1] - Zn3Load |
| # CHECK-NEXT: [15.2] - Zn3Load |
| # CHECK-NEXT: [16.0] - Zn3Store |
| # CHECK-NEXT: [16.1] - Zn3Store |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions: |
| # CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - andnps %xmm1, %xmm1 |
| # CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - andnps %xmm0, %xmm1 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 01234 |
| |
| # CHECK: [0,0] DeER. andnps %xmm1, %xmm1 |
| # CHECK-NEXT: [0,1] D=eER andnps %xmm0, %xmm1 |
| # CHECK-NEXT: [1,0] DeE-R andnps %xmm1, %xmm1 |
| # CHECK-NEXT: [1,1] D=eER andnps %xmm0, %xmm1 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 2 1.0 1.0 0.5 andnps %xmm1, %xmm1 |
| # CHECK-NEXT: 1. 2 2.0 0.0 0.0 andnps %xmm0, %xmm1 |
| # CHECK-NEXT: 2 1.5 0.5 0.3 <total> |
| |
| # CHECK: [3] Code Region |
| |
| # CHECK: Iterations: 10000 |
| # CHECK-NEXT: Instructions: 20000 |
| # CHECK-NEXT: Total Cycles: 5004 |
| # CHECK-NEXT: Total uOps: 20000 |
| |
| # CHECK: Dispatch Width: 6 |
| # CHECK-NEXT: uOps Per Cycle: 4.00 |
| # CHECK-NEXT: IPC: 4.00 |
| # CHECK-NEXT: Block RThroughput: 0.5 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 0.25 andnpd %xmm1, %xmm1 |
| # CHECK-NEXT: 1 1 0.25 andnpd %xmm0, %xmm1 |
| |
| # CHECK: Register File statistics: |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #1 -- Zn3FpPRF: |
| # CHECK-NEXT: Number of physical registers: 160 |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #2 -- Zn3IntegerPRF: |
| # CHECK-NEXT: Number of physical registers: 192 |
| # CHECK-NEXT: Total number of mappings created: 0 |
| # CHECK-NEXT: Max number of mappings used: 0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn3AGU0 |
| # CHECK-NEXT: [1] - Zn3AGU1 |
| # CHECK-NEXT: [2] - Zn3AGU2 |
| # CHECK-NEXT: [3] - Zn3ALU0 |
| # CHECK-NEXT: [4] - Zn3ALU1 |
| # CHECK-NEXT: [5] - Zn3ALU2 |
| # CHECK-NEXT: [6] - Zn3ALU3 |
| # CHECK-NEXT: [7] - Zn3BRU1 |
| # CHECK-NEXT: [8] - Zn3FP0 |
| # CHECK-NEXT: [9] - Zn3FP1 |
| # CHECK-NEXT: [10] - Zn3FP2 |
| # CHECK-NEXT: [11] - Zn3FP3 |
| # CHECK-NEXT: [12.0] - Zn3FP45 |
| # CHECK-NEXT: [12.1] - Zn3FP45 |
| # CHECK-NEXT: [13] - Zn3FPSt |
| # CHECK-NEXT: [14.0] - Zn3LSU |
| # CHECK-NEXT: [14.1] - Zn3LSU |
| # CHECK-NEXT: [14.2] - Zn3LSU |
| # CHECK-NEXT: [15.0] - Zn3Load |
| # CHECK-NEXT: [15.1] - Zn3Load |
| # CHECK-NEXT: [15.2] - Zn3Load |
| # CHECK-NEXT: [16.0] - Zn3Store |
| # CHECK-NEXT: [16.1] - Zn3Store |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions: |
| # CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - andnpd %xmm1, %xmm1 |
| # CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - andnpd %xmm0, %xmm1 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 01234 |
| |
| # CHECK: [0,0] DeER. andnpd %xmm1, %xmm1 |
| # CHECK-NEXT: [0,1] D=eER andnpd %xmm0, %xmm1 |
| # CHECK-NEXT: [1,0] DeE-R andnpd %xmm1, %xmm1 |
| # CHECK-NEXT: [1,1] D=eER andnpd %xmm0, %xmm1 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 2 1.0 1.0 0.5 andnpd %xmm1, %xmm1 |
| # CHECK-NEXT: 1. 2 2.0 0.0 0.0 andnpd %xmm0, %xmm1 |
| # CHECK-NEXT: 2 1.5 0.5 0.3 <total> |
| |
| # CHECK: [4] Code Region |
| |
| # CHECK: Iterations: 10000 |
| # CHECK-NEXT: Instructions: 20000 |
| # CHECK-NEXT: Total Cycles: 5004 |
| # CHECK-NEXT: Total uOps: 20000 |
| |
| # CHECK: Dispatch Width: 6 |
| # CHECK-NEXT: uOps Per Cycle: 4.00 |
| # CHECK-NEXT: IPC: 4.00 |
| # CHECK-NEXT: Block RThroughput: 0.5 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 0.25 pxor %xmm1, %xmm1 |
| # CHECK-NEXT: 1 1 0.25 pxor %xmm0, %xmm1 |
| |
| # CHECK: Register File statistics: |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #1 -- Zn3FpPRF: |
| # CHECK-NEXT: Number of physical registers: 160 |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #2 -- Zn3IntegerPRF: |
| # CHECK-NEXT: Number of physical registers: 192 |
| # CHECK-NEXT: Total number of mappings created: 0 |
| # CHECK-NEXT: Max number of mappings used: 0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn3AGU0 |
| # CHECK-NEXT: [1] - Zn3AGU1 |
| # CHECK-NEXT: [2] - Zn3AGU2 |
| # CHECK-NEXT: [3] - Zn3ALU0 |
| # CHECK-NEXT: [4] - Zn3ALU1 |
| # CHECK-NEXT: [5] - Zn3ALU2 |
| # CHECK-NEXT: [6] - Zn3ALU3 |
| # CHECK-NEXT: [7] - Zn3BRU1 |
| # CHECK-NEXT: [8] - Zn3FP0 |
| # CHECK-NEXT: [9] - Zn3FP1 |
| # CHECK-NEXT: [10] - Zn3FP2 |
| # CHECK-NEXT: [11] - Zn3FP3 |
| # CHECK-NEXT: [12.0] - Zn3FP45 |
| # CHECK-NEXT: [12.1] - Zn3FP45 |
| # CHECK-NEXT: [13] - Zn3FPSt |
| # CHECK-NEXT: [14.0] - Zn3LSU |
| # CHECK-NEXT: [14.1] - Zn3LSU |
| # CHECK-NEXT: [14.2] - Zn3LSU |
| # CHECK-NEXT: [15.0] - Zn3Load |
| # CHECK-NEXT: [15.1] - Zn3Load |
| # CHECK-NEXT: [15.2] - Zn3Load |
| # CHECK-NEXT: [16.0] - Zn3Store |
| # CHECK-NEXT: [16.1] - Zn3Store |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions: |
| # CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - pxor %xmm1, %xmm1 |
| # CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - pxor %xmm0, %xmm1 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 01234 |
| |
| # CHECK: [0,0] DeER. pxor %xmm1, %xmm1 |
| # CHECK-NEXT: [0,1] D=eER pxor %xmm0, %xmm1 |
| # CHECK-NEXT: [1,0] DeE-R pxor %xmm1, %xmm1 |
| # CHECK-NEXT: [1,1] D=eER pxor %xmm0, %xmm1 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 2 1.0 1.0 0.5 pxor %xmm1, %xmm1 |
| # CHECK-NEXT: 1. 2 2.0 0.0 0.0 pxor %xmm0, %xmm1 |
| # CHECK-NEXT: 2 1.5 0.5 0.3 <total> |
| |
| # CHECK: [5] Code Region |
| |
| # CHECK: Iterations: 10000 |
| # CHECK-NEXT: Instructions: 20000 |
| # CHECK-NEXT: Total Cycles: 5004 |
| # CHECK-NEXT: Total uOps: 20000 |
| |
| # CHECK: Dispatch Width: 6 |
| # CHECK-NEXT: uOps Per Cycle: 4.00 |
| # CHECK-NEXT: IPC: 4.00 |
| # CHECK-NEXT: Block RThroughput: 0.5 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 0.25 pandn %xmm1, %xmm1 |
| # CHECK-NEXT: 1 1 0.25 pandn %xmm0, %xmm1 |
| |
| # CHECK: Register File statistics: |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #1 -- Zn3FpPRF: |
| # CHECK-NEXT: Number of physical registers: 160 |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #2 -- Zn3IntegerPRF: |
| # CHECK-NEXT: Number of physical registers: 192 |
| # CHECK-NEXT: Total number of mappings created: 0 |
| # CHECK-NEXT: Max number of mappings used: 0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn3AGU0 |
| # CHECK-NEXT: [1] - Zn3AGU1 |
| # CHECK-NEXT: [2] - Zn3AGU2 |
| # CHECK-NEXT: [3] - Zn3ALU0 |
| # CHECK-NEXT: [4] - Zn3ALU1 |
| # CHECK-NEXT: [5] - Zn3ALU2 |
| # CHECK-NEXT: [6] - Zn3ALU3 |
| # CHECK-NEXT: [7] - Zn3BRU1 |
| # CHECK-NEXT: [8] - Zn3FP0 |
| # CHECK-NEXT: [9] - Zn3FP1 |
| # CHECK-NEXT: [10] - Zn3FP2 |
| # CHECK-NEXT: [11] - Zn3FP3 |
| # CHECK-NEXT: [12.0] - Zn3FP45 |
| # CHECK-NEXT: [12.1] - Zn3FP45 |
| # CHECK-NEXT: [13] - Zn3FPSt |
| # CHECK-NEXT: [14.0] - Zn3LSU |
| # CHECK-NEXT: [14.1] - Zn3LSU |
| # CHECK-NEXT: [14.2] - Zn3LSU |
| # CHECK-NEXT: [15.0] - Zn3Load |
| # CHECK-NEXT: [15.1] - Zn3Load |
| # CHECK-NEXT: [15.2] - Zn3Load |
| # CHECK-NEXT: [16.0] - Zn3Store |
| # CHECK-NEXT: [16.1] - Zn3Store |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions: |
| # CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - pandn %xmm1, %xmm1 |
| # CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - pandn %xmm0, %xmm1 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 01234 |
| |
| # CHECK: [0,0] DeER. pandn %xmm1, %xmm1 |
| # CHECK-NEXT: [0,1] D=eER pandn %xmm0, %xmm1 |
| # CHECK-NEXT: [1,0] DeE-R pandn %xmm1, %xmm1 |
| # CHECK-NEXT: [1,1] D=eER pandn %xmm0, %xmm1 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 2 1.0 1.0 0.5 pandn %xmm1, %xmm1 |
| # CHECK-NEXT: 1. 2 2.0 0.0 0.0 pandn %xmm0, %xmm1 |
| # CHECK-NEXT: 2 1.5 0.5 0.3 <total> |
| |
| # CHECK: [6] Code Region |
| |
| # CHECK: Iterations: 10000 |
| # CHECK-NEXT: Instructions: 20000 |
| # CHECK-NEXT: Total Cycles: 5004 |
| # CHECK-NEXT: Total uOps: 20000 |
| |
| # CHECK: Dispatch Width: 6 |
| # CHECK-NEXT: uOps Per Cycle: 4.00 |
| # CHECK-NEXT: IPC: 4.00 |
| # CHECK-NEXT: Block RThroughput: 0.5 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 0.25 psubb %xmm1, %xmm1 |
| # CHECK-NEXT: 1 1 0.25 psubb %xmm0, %xmm1 |
| |
| # CHECK: Register File statistics: |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #1 -- Zn3FpPRF: |
| # CHECK-NEXT: Number of physical registers: 160 |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #2 -- Zn3IntegerPRF: |
| # CHECK-NEXT: Number of physical registers: 192 |
| # CHECK-NEXT: Total number of mappings created: 0 |
| # CHECK-NEXT: Max number of mappings used: 0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn3AGU0 |
| # CHECK-NEXT: [1] - Zn3AGU1 |
| # CHECK-NEXT: [2] - Zn3AGU2 |
| # CHECK-NEXT: [3] - Zn3ALU0 |
| # CHECK-NEXT: [4] - Zn3ALU1 |
| # CHECK-NEXT: [5] - Zn3ALU2 |
| # CHECK-NEXT: [6] - Zn3ALU3 |
| # CHECK-NEXT: [7] - Zn3BRU1 |
| # CHECK-NEXT: [8] - Zn3FP0 |
| # CHECK-NEXT: [9] - Zn3FP1 |
| # CHECK-NEXT: [10] - Zn3FP2 |
| # CHECK-NEXT: [11] - Zn3FP3 |
| # CHECK-NEXT: [12.0] - Zn3FP45 |
| # CHECK-NEXT: [12.1] - Zn3FP45 |
| # CHECK-NEXT: [13] - Zn3FPSt |
| # CHECK-NEXT: [14.0] - Zn3LSU |
| # CHECK-NEXT: [14.1] - Zn3LSU |
| # CHECK-NEXT: [14.2] - Zn3LSU |
| # CHECK-NEXT: [15.0] - Zn3Load |
| # CHECK-NEXT: [15.1] - Zn3Load |
| # CHECK-NEXT: [15.2] - Zn3Load |
| # CHECK-NEXT: [16.0] - Zn3Store |
| # CHECK-NEXT: [16.1] - Zn3Store |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions: |
| # CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - psubb %xmm1, %xmm1 |
| # CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - psubb %xmm0, %xmm1 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 01234 |
| |
| # CHECK: [0,0] DeER. psubb %xmm1, %xmm1 |
| # CHECK-NEXT: [0,1] D=eER psubb %xmm0, %xmm1 |
| # CHECK-NEXT: [1,0] DeE-R psubb %xmm1, %xmm1 |
| # CHECK-NEXT: [1,1] D=eER psubb %xmm0, %xmm1 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 2 1.0 1.0 0.5 psubb %xmm1, %xmm1 |
| # CHECK-NEXT: 1. 2 2.0 0.0 0.0 psubb %xmm0, %xmm1 |
| # CHECK-NEXT: 2 1.5 0.5 0.3 <total> |
| |
| # CHECK: [7] Code Region |
| |
| # CHECK: Iterations: 10000 |
| # CHECK-NEXT: Instructions: 20000 |
| # CHECK-NEXT: Total Cycles: 5004 |
| # CHECK-NEXT: Total uOps: 20000 |
| |
| # CHECK: Dispatch Width: 6 |
| # CHECK-NEXT: uOps Per Cycle: 4.00 |
| # CHECK-NEXT: IPC: 4.00 |
| # CHECK-NEXT: Block RThroughput: 0.5 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 0.25 psubw %xmm1, %xmm1 |
| # CHECK-NEXT: 1 1 0.25 psubw %xmm0, %xmm1 |
| |
| # CHECK: Register File statistics: |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #1 -- Zn3FpPRF: |
| # CHECK-NEXT: Number of physical registers: 160 |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #2 -- Zn3IntegerPRF: |
| # CHECK-NEXT: Number of physical registers: 192 |
| # CHECK-NEXT: Total number of mappings created: 0 |
| # CHECK-NEXT: Max number of mappings used: 0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn3AGU0 |
| # CHECK-NEXT: [1] - Zn3AGU1 |
| # CHECK-NEXT: [2] - Zn3AGU2 |
| # CHECK-NEXT: [3] - Zn3ALU0 |
| # CHECK-NEXT: [4] - Zn3ALU1 |
| # CHECK-NEXT: [5] - Zn3ALU2 |
| # CHECK-NEXT: [6] - Zn3ALU3 |
| # CHECK-NEXT: [7] - Zn3BRU1 |
| # CHECK-NEXT: [8] - Zn3FP0 |
| # CHECK-NEXT: [9] - Zn3FP1 |
| # CHECK-NEXT: [10] - Zn3FP2 |
| # CHECK-NEXT: [11] - Zn3FP3 |
| # CHECK-NEXT: [12.0] - Zn3FP45 |
| # CHECK-NEXT: [12.1] - Zn3FP45 |
| # CHECK-NEXT: [13] - Zn3FPSt |
| # CHECK-NEXT: [14.0] - Zn3LSU |
| # CHECK-NEXT: [14.1] - Zn3LSU |
| # CHECK-NEXT: [14.2] - Zn3LSU |
| # CHECK-NEXT: [15.0] - Zn3Load |
| # CHECK-NEXT: [15.1] - Zn3Load |
| # CHECK-NEXT: [15.2] - Zn3Load |
| # CHECK-NEXT: [16.0] - Zn3Store |
| # CHECK-NEXT: [16.1] - Zn3Store |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions: |
| # CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - psubw %xmm1, %xmm1 |
| # CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - psubw %xmm0, %xmm1 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 01234 |
| |
| # CHECK: [0,0] DeER. psubw %xmm1, %xmm1 |
| # CHECK-NEXT: [0,1] D=eER psubw %xmm0, %xmm1 |
| # CHECK-NEXT: [1,0] DeE-R psubw %xmm1, %xmm1 |
| # CHECK-NEXT: [1,1] D=eER psubw %xmm0, %xmm1 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 2 1.0 1.0 0.5 psubw %xmm1, %xmm1 |
| # CHECK-NEXT: 1. 2 2.0 0.0 0.0 psubw %xmm0, %xmm1 |
| # CHECK-NEXT: 2 1.5 0.5 0.3 <total> |
| |
| # CHECK: [8] Code Region |
| |
| # CHECK: Iterations: 10000 |
| # CHECK-NEXT: Instructions: 20000 |
| # CHECK-NEXT: Total Cycles: 5004 |
| # CHECK-NEXT: Total uOps: 20000 |
| |
| # CHECK: Dispatch Width: 6 |
| # CHECK-NEXT: uOps Per Cycle: 4.00 |
| # CHECK-NEXT: IPC: 4.00 |
| # CHECK-NEXT: Block RThroughput: 0.5 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 0.25 psubd %xmm1, %xmm1 |
| # CHECK-NEXT: 1 1 0.25 psubd %xmm0, %xmm1 |
| |
| # CHECK: Register File statistics: |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #1 -- Zn3FpPRF: |
| # CHECK-NEXT: Number of physical registers: 160 |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #2 -- Zn3IntegerPRF: |
| # CHECK-NEXT: Number of physical registers: 192 |
| # CHECK-NEXT: Total number of mappings created: 0 |
| # CHECK-NEXT: Max number of mappings used: 0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn3AGU0 |
| # CHECK-NEXT: [1] - Zn3AGU1 |
| # CHECK-NEXT: [2] - Zn3AGU2 |
| # CHECK-NEXT: [3] - Zn3ALU0 |
| # CHECK-NEXT: [4] - Zn3ALU1 |
| # CHECK-NEXT: [5] - Zn3ALU2 |
| # CHECK-NEXT: [6] - Zn3ALU3 |
| # CHECK-NEXT: [7] - Zn3BRU1 |
| # CHECK-NEXT: [8] - Zn3FP0 |
| # CHECK-NEXT: [9] - Zn3FP1 |
| # CHECK-NEXT: [10] - Zn3FP2 |
| # CHECK-NEXT: [11] - Zn3FP3 |
| # CHECK-NEXT: [12.0] - Zn3FP45 |
| # CHECK-NEXT: [12.1] - Zn3FP45 |
| # CHECK-NEXT: [13] - Zn3FPSt |
| # CHECK-NEXT: [14.0] - Zn3LSU |
| # CHECK-NEXT: [14.1] - Zn3LSU |
| # CHECK-NEXT: [14.2] - Zn3LSU |
| # CHECK-NEXT: [15.0] - Zn3Load |
| # CHECK-NEXT: [15.1] - Zn3Load |
| # CHECK-NEXT: [15.2] - Zn3Load |
| # CHECK-NEXT: [16.0] - Zn3Store |
| # CHECK-NEXT: [16.1] - Zn3Store |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions: |
| # CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - psubd %xmm1, %xmm1 |
| # CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - psubd %xmm0, %xmm1 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 01234 |
| |
| # CHECK: [0,0] DeER. psubd %xmm1, %xmm1 |
| # CHECK-NEXT: [0,1] D=eER psubd %xmm0, %xmm1 |
| # CHECK-NEXT: [1,0] DeE-R psubd %xmm1, %xmm1 |
| # CHECK-NEXT: [1,1] D=eER psubd %xmm0, %xmm1 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 2 1.0 1.0 0.5 psubd %xmm1, %xmm1 |
| # CHECK-NEXT: 1. 2 2.0 0.0 0.0 psubd %xmm0, %xmm1 |
| # CHECK-NEXT: 2 1.5 0.5 0.3 <total> |
| |
| # CHECK: [9] Code Region |
| |
| # CHECK: Iterations: 10000 |
| # CHECK-NEXT: Instructions: 20000 |
| # CHECK-NEXT: Total Cycles: 5004 |
| # CHECK-NEXT: Total uOps: 20000 |
| |
| # CHECK: Dispatch Width: 6 |
| # CHECK-NEXT: uOps Per Cycle: 4.00 |
| # CHECK-NEXT: IPC: 4.00 |
| # CHECK-NEXT: Block RThroughput: 0.5 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 0.25 psubq %xmm1, %xmm1 |
| # CHECK-NEXT: 1 1 0.25 psubq %xmm0, %xmm1 |
| |
| # CHECK: Register File statistics: |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #1 -- Zn3FpPRF: |
| # CHECK-NEXT: Number of physical registers: 160 |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #2 -- Zn3IntegerPRF: |
| # CHECK-NEXT: Number of physical registers: 192 |
| # CHECK-NEXT: Total number of mappings created: 0 |
| # CHECK-NEXT: Max number of mappings used: 0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn3AGU0 |
| # CHECK-NEXT: [1] - Zn3AGU1 |
| # CHECK-NEXT: [2] - Zn3AGU2 |
| # CHECK-NEXT: [3] - Zn3ALU0 |
| # CHECK-NEXT: [4] - Zn3ALU1 |
| # CHECK-NEXT: [5] - Zn3ALU2 |
| # CHECK-NEXT: [6] - Zn3ALU3 |
| # CHECK-NEXT: [7] - Zn3BRU1 |
| # CHECK-NEXT: [8] - Zn3FP0 |
| # CHECK-NEXT: [9] - Zn3FP1 |
| # CHECK-NEXT: [10] - Zn3FP2 |
| # CHECK-NEXT: [11] - Zn3FP3 |
| # CHECK-NEXT: [12.0] - Zn3FP45 |
| # CHECK-NEXT: [12.1] - Zn3FP45 |
| # CHECK-NEXT: [13] - Zn3FPSt |
| # CHECK-NEXT: [14.0] - Zn3LSU |
| # CHECK-NEXT: [14.1] - Zn3LSU |
| # CHECK-NEXT: [14.2] - Zn3LSU |
| # CHECK-NEXT: [15.0] - Zn3Load |
| # CHECK-NEXT: [15.1] - Zn3Load |
| # CHECK-NEXT: [15.2] - Zn3Load |
| # CHECK-NEXT: [16.0] - Zn3Store |
| # CHECK-NEXT: [16.1] - Zn3Store |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions: |
| # CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - psubq %xmm1, %xmm1 |
| # CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - psubq %xmm0, %xmm1 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 01234 |
| |
| # CHECK: [0,0] DeER. psubq %xmm1, %xmm1 |
| # CHECK-NEXT: [0,1] D=eER psubq %xmm0, %xmm1 |
| # CHECK-NEXT: [1,0] DeE-R psubq %xmm1, %xmm1 |
| # CHECK-NEXT: [1,1] D=eER psubq %xmm0, %xmm1 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 2 1.0 1.0 0.5 psubq %xmm1, %xmm1 |
| # CHECK-NEXT: 1. 2 2.0 0.0 0.0 psubq %xmm0, %xmm1 |
| # CHECK-NEXT: 2 1.5 0.5 0.3 <total> |
| |
| # CHECK: [10] Code Region |
| |
| # CHECK: Iterations: 10000 |
| # CHECK-NEXT: Instructions: 20000 |
| # CHECK-NEXT: Total Cycles: 5004 |
| # CHECK-NEXT: Total uOps: 20000 |
| |
| # CHECK: Dispatch Width: 6 |
| # CHECK-NEXT: uOps Per Cycle: 4.00 |
| # CHECK-NEXT: IPC: 4.00 |
| # CHECK-NEXT: Block RThroughput: 0.5 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 0.50 psubsb %xmm1, %xmm1 |
| # CHECK-NEXT: 1 1 0.25 pxor %xmm0, %xmm1 |
| |
| # CHECK: Register File statistics: |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #1 -- Zn3FpPRF: |
| # CHECK-NEXT: Number of physical registers: 160 |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #2 -- Zn3IntegerPRF: |
| # CHECK-NEXT: Number of physical registers: 192 |
| # CHECK-NEXT: Total number of mappings created: 0 |
| # CHECK-NEXT: Max number of mappings used: 0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn3AGU0 |
| # CHECK-NEXT: [1] - Zn3AGU1 |
| # CHECK-NEXT: [2] - Zn3AGU2 |
| # CHECK-NEXT: [3] - Zn3ALU0 |
| # CHECK-NEXT: [4] - Zn3ALU1 |
| # CHECK-NEXT: [5] - Zn3ALU2 |
| # CHECK-NEXT: [6] - Zn3ALU3 |
| # CHECK-NEXT: [7] - Zn3BRU1 |
| # CHECK-NEXT: [8] - Zn3FP0 |
| # CHECK-NEXT: [9] - Zn3FP1 |
| # CHECK-NEXT: [10] - Zn3FP2 |
| # CHECK-NEXT: [11] - Zn3FP3 |
| # CHECK-NEXT: [12.0] - Zn3FP45 |
| # CHECK-NEXT: [12.1] - Zn3FP45 |
| # CHECK-NEXT: [13] - Zn3FPSt |
| # CHECK-NEXT: [14.0] - Zn3LSU |
| # CHECK-NEXT: [14.1] - Zn3LSU |
| # CHECK-NEXT: [14.2] - Zn3LSU |
| # CHECK-NEXT: [15.0] - Zn3Load |
| # CHECK-NEXT: [15.1] - Zn3Load |
| # CHECK-NEXT: [15.2] - Zn3Load |
| # CHECK-NEXT: [16.0] - Zn3Store |
| # CHECK-NEXT: [16.1] - Zn3Store |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions: |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 - - - - - - - - - - - - - psubsb %xmm1, %xmm1 |
| # CHECK-NEXT: - - - - - - - - - - 0.50 0.50 - - - - - - - - - - - pxor %xmm0, %xmm1 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 01234 |
| |
| # CHECK: [0,0] DeER. psubsb %xmm1, %xmm1 |
| # CHECK-NEXT: [0,1] D=eER pxor %xmm0, %xmm1 |
| # CHECK-NEXT: [1,0] DeE-R psubsb %xmm1, %xmm1 |
| # CHECK-NEXT: [1,1] D=eER pxor %xmm0, %xmm1 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 2 1.0 1.0 0.5 psubsb %xmm1, %xmm1 |
| # CHECK-NEXT: 1. 2 2.0 0.0 0.0 pxor %xmm0, %xmm1 |
| # CHECK-NEXT: 2 1.5 0.5 0.3 <total> |
| |
| # CHECK: [11] Code Region |
| |
| # CHECK: Iterations: 10000 |
| # CHECK-NEXT: Instructions: 20000 |
| # CHECK-NEXT: Total Cycles: 5004 |
| # CHECK-NEXT: Total uOps: 20000 |
| |
| # CHECK: Dispatch Width: 6 |
| # CHECK-NEXT: uOps Per Cycle: 4.00 |
| # CHECK-NEXT: IPC: 4.00 |
| # CHECK-NEXT: Block RThroughput: 0.5 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 0.50 psubsw %xmm1, %xmm1 |
| # CHECK-NEXT: 1 1 0.25 pxor %xmm0, %xmm1 |
| |
| # CHECK: Register File statistics: |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #1 -- Zn3FpPRF: |
| # CHECK-NEXT: Number of physical registers: 160 |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #2 -- Zn3IntegerPRF: |
| # CHECK-NEXT: Number of physical registers: 192 |
| # CHECK-NEXT: Total number of mappings created: 0 |
| # CHECK-NEXT: Max number of mappings used: 0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn3AGU0 |
| # CHECK-NEXT: [1] - Zn3AGU1 |
| # CHECK-NEXT: [2] - Zn3AGU2 |
| # CHECK-NEXT: [3] - Zn3ALU0 |
| # CHECK-NEXT: [4] - Zn3ALU1 |
| # CHECK-NEXT: [5] - Zn3ALU2 |
| # CHECK-NEXT: [6] - Zn3ALU3 |
| # CHECK-NEXT: [7] - Zn3BRU1 |
| # CHECK-NEXT: [8] - Zn3FP0 |
| # CHECK-NEXT: [9] - Zn3FP1 |
| # CHECK-NEXT: [10] - Zn3FP2 |
| # CHECK-NEXT: [11] - Zn3FP3 |
| # CHECK-NEXT: [12.0] - Zn3FP45 |
| # CHECK-NEXT: [12.1] - Zn3FP45 |
| # CHECK-NEXT: [13] - Zn3FPSt |
| # CHECK-NEXT: [14.0] - Zn3LSU |
| # CHECK-NEXT: [14.1] - Zn3LSU |
| # CHECK-NEXT: [14.2] - Zn3LSU |
| # CHECK-NEXT: [15.0] - Zn3Load |
| # CHECK-NEXT: [15.1] - Zn3Load |
| # CHECK-NEXT: [15.2] - Zn3Load |
| # CHECK-NEXT: [16.0] - Zn3Store |
| # CHECK-NEXT: [16.1] - Zn3Store |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions: |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 - - - - - - - - - - - - - psubsw %xmm1, %xmm1 |
| # CHECK-NEXT: - - - - - - - - - - 0.50 0.50 - - - - - - - - - - - pxor %xmm0, %xmm1 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 01234 |
| |
| # CHECK: [0,0] DeER. psubsw %xmm1, %xmm1 |
| # CHECK-NEXT: [0,1] D=eER pxor %xmm0, %xmm1 |
| # CHECK-NEXT: [1,0] DeE-R psubsw %xmm1, %xmm1 |
| # CHECK-NEXT: [1,1] D=eER pxor %xmm0, %xmm1 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 2 1.0 1.0 0.5 psubsw %xmm1, %xmm1 |
| # CHECK-NEXT: 1. 2 2.0 0.0 0.0 pxor %xmm0, %xmm1 |
| # CHECK-NEXT: 2 1.5 0.5 0.3 <total> |
| |
| # CHECK: [12] Code Region |
| |
| # CHECK: Iterations: 10000 |
| # CHECK-NEXT: Instructions: 20000 |
| # CHECK-NEXT: Total Cycles: 5004 |
| # CHECK-NEXT: Total uOps: 20000 |
| |
| # CHECK: Dispatch Width: 6 |
| # CHECK-NEXT: uOps Per Cycle: 4.00 |
| # CHECK-NEXT: IPC: 4.00 |
| # CHECK-NEXT: Block RThroughput: 0.5 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 0.50 psubusb %xmm1, %xmm1 |
| # CHECK-NEXT: 1 1 0.25 pxor %xmm0, %xmm1 |
| |
| # CHECK: Register File statistics: |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #1 -- Zn3FpPRF: |
| # CHECK-NEXT: Number of physical registers: 160 |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #2 -- Zn3IntegerPRF: |
| # CHECK-NEXT: Number of physical registers: 192 |
| # CHECK-NEXT: Total number of mappings created: 0 |
| # CHECK-NEXT: Max number of mappings used: 0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn3AGU0 |
| # CHECK-NEXT: [1] - Zn3AGU1 |
| # CHECK-NEXT: [2] - Zn3AGU2 |
| # CHECK-NEXT: [3] - Zn3ALU0 |
| # CHECK-NEXT: [4] - Zn3ALU1 |
| # CHECK-NEXT: [5] - Zn3ALU2 |
| # CHECK-NEXT: [6] - Zn3ALU3 |
| # CHECK-NEXT: [7] - Zn3BRU1 |
| # CHECK-NEXT: [8] - Zn3FP0 |
| # CHECK-NEXT: [9] - Zn3FP1 |
| # CHECK-NEXT: [10] - Zn3FP2 |
| # CHECK-NEXT: [11] - Zn3FP3 |
| # CHECK-NEXT: [12.0] - Zn3FP45 |
| # CHECK-NEXT: [12.1] - Zn3FP45 |
| # CHECK-NEXT: [13] - Zn3FPSt |
| # CHECK-NEXT: [14.0] - Zn3LSU |
| # CHECK-NEXT: [14.1] - Zn3LSU |
| # CHECK-NEXT: [14.2] - Zn3LSU |
| # CHECK-NEXT: [15.0] - Zn3Load |
| # CHECK-NEXT: [15.1] - Zn3Load |
| # CHECK-NEXT: [15.2] - Zn3Load |
| # CHECK-NEXT: [16.0] - Zn3Store |
| # CHECK-NEXT: [16.1] - Zn3Store |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions: |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 - - - - - - - - - - - - - psubusb %xmm1, %xmm1 |
| # CHECK-NEXT: - - - - - - - - - - 0.50 0.50 - - - - - - - - - - - pxor %xmm0, %xmm1 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 01234 |
| |
| # CHECK: [0,0] DeER. psubusb %xmm1, %xmm1 |
| # CHECK-NEXT: [0,1] D=eER pxor %xmm0, %xmm1 |
| # CHECK-NEXT: [1,0] DeE-R psubusb %xmm1, %xmm1 |
| # CHECK-NEXT: [1,1] D=eER pxor %xmm0, %xmm1 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 2 1.0 1.0 0.5 psubusb %xmm1, %xmm1 |
| # CHECK-NEXT: 1. 2 2.0 0.0 0.0 pxor %xmm0, %xmm1 |
| # CHECK-NEXT: 2 1.5 0.5 0.3 <total> |
| |
| # CHECK: [13] Code Region |
| |
| # CHECK: Iterations: 10000 |
| # CHECK-NEXT: Instructions: 20000 |
| # CHECK-NEXT: Total Cycles: 5004 |
| # CHECK-NEXT: Total uOps: 20000 |
| |
| # CHECK: Dispatch Width: 6 |
| # CHECK-NEXT: uOps Per Cycle: 4.00 |
| # CHECK-NEXT: IPC: 4.00 |
| # CHECK-NEXT: Block RThroughput: 0.5 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 0.50 psubusw %xmm1, %xmm1 |
| # CHECK-NEXT: 1 1 0.25 pxor %xmm0, %xmm1 |
| |
| # CHECK: Register File statistics: |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #1 -- Zn3FpPRF: |
| # CHECK-NEXT: Number of physical registers: 160 |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #2 -- Zn3IntegerPRF: |
| # CHECK-NEXT: Number of physical registers: 192 |
| # CHECK-NEXT: Total number of mappings created: 0 |
| # CHECK-NEXT: Max number of mappings used: 0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn3AGU0 |
| # CHECK-NEXT: [1] - Zn3AGU1 |
| # CHECK-NEXT: [2] - Zn3AGU2 |
| # CHECK-NEXT: [3] - Zn3ALU0 |
| # CHECK-NEXT: [4] - Zn3ALU1 |
| # CHECK-NEXT: [5] - Zn3ALU2 |
| # CHECK-NEXT: [6] - Zn3ALU3 |
| # CHECK-NEXT: [7] - Zn3BRU1 |
| # CHECK-NEXT: [8] - Zn3FP0 |
| # CHECK-NEXT: [9] - Zn3FP1 |
| # CHECK-NEXT: [10] - Zn3FP2 |
| # CHECK-NEXT: [11] - Zn3FP3 |
| # CHECK-NEXT: [12.0] - Zn3FP45 |
| # CHECK-NEXT: [12.1] - Zn3FP45 |
| # CHECK-NEXT: [13] - Zn3FPSt |
| # CHECK-NEXT: [14.0] - Zn3LSU |
| # CHECK-NEXT: [14.1] - Zn3LSU |
| # CHECK-NEXT: [14.2] - Zn3LSU |
| # CHECK-NEXT: [15.0] - Zn3Load |
| # CHECK-NEXT: [15.1] - Zn3Load |
| # CHECK-NEXT: [15.2] - Zn3Load |
| # CHECK-NEXT: [16.0] - Zn3Store |
| # CHECK-NEXT: [16.1] - Zn3Store |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions: |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 - - - - - - - - - - - - - psubusw %xmm1, %xmm1 |
| # CHECK-NEXT: - - - - - - - - - - 0.50 0.50 - - - - - - - - - - - pxor %xmm0, %xmm1 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 01234 |
| |
| # CHECK: [0,0] DeER. psubusw %xmm1, %xmm1 |
| # CHECK-NEXT: [0,1] D=eER pxor %xmm0, %xmm1 |
| # CHECK-NEXT: [1,0] DeE-R psubusw %xmm1, %xmm1 |
| # CHECK-NEXT: [1,1] D=eER pxor %xmm0, %xmm1 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 2 1.0 1.0 0.5 psubusw %xmm1, %xmm1 |
| # CHECK-NEXT: 1. 2 2.0 0.0 0.0 pxor %xmm0, %xmm1 |
| # CHECK-NEXT: 2 1.5 0.5 0.3 <total> |
| |
| # CHECK: [14] Code Region |
| |
| # CHECK: Iterations: 10000 |
| # CHECK-NEXT: Instructions: 20000 |
| # CHECK-NEXT: Total Cycles: 5004 |
| # CHECK-NEXT: Total uOps: 20000 |
| |
| # CHECK: Dispatch Width: 6 |
| # CHECK-NEXT: uOps Per Cycle: 4.00 |
| # CHECK-NEXT: IPC: 4.00 |
| # CHECK-NEXT: Block RThroughput: 0.5 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 0.25 pcmpgtb %xmm0, %xmm0 |
| # CHECK-NEXT: 1 1 0.25 paddb %xmm0, %xmm0 |
| |
| # CHECK: Register File statistics: |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #1 -- Zn3FpPRF: |
| # CHECK-NEXT: Number of physical registers: 160 |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #2 -- Zn3IntegerPRF: |
| # CHECK-NEXT: Number of physical registers: 192 |
| # CHECK-NEXT: Total number of mappings created: 0 |
| # CHECK-NEXT: Max number of mappings used: 0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn3AGU0 |
| # CHECK-NEXT: [1] - Zn3AGU1 |
| # CHECK-NEXT: [2] - Zn3AGU2 |
| # CHECK-NEXT: [3] - Zn3ALU0 |
| # CHECK-NEXT: [4] - Zn3ALU1 |
| # CHECK-NEXT: [5] - Zn3ALU2 |
| # CHECK-NEXT: [6] - Zn3ALU3 |
| # CHECK-NEXT: [7] - Zn3BRU1 |
| # CHECK-NEXT: [8] - Zn3FP0 |
| # CHECK-NEXT: [9] - Zn3FP1 |
| # CHECK-NEXT: [10] - Zn3FP2 |
| # CHECK-NEXT: [11] - Zn3FP3 |
| # CHECK-NEXT: [12.0] - Zn3FP45 |
| # CHECK-NEXT: [12.1] - Zn3FP45 |
| # CHECK-NEXT: [13] - Zn3FPSt |
| # CHECK-NEXT: [14.0] - Zn3LSU |
| # CHECK-NEXT: [14.1] - Zn3LSU |
| # CHECK-NEXT: [14.2] - Zn3LSU |
| # CHECK-NEXT: [15.0] - Zn3Load |
| # CHECK-NEXT: [15.1] - Zn3Load |
| # CHECK-NEXT: [15.2] - Zn3Load |
| # CHECK-NEXT: [16.0] - Zn3Store |
| # CHECK-NEXT: [16.1] - Zn3Store |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions: |
| # CHECK-NEXT: - - - - - - - - 0.25 0.25 0.50 - - - - - - - - - - - - pcmpgtb %xmm0, %xmm0 |
| # CHECK-NEXT: - - - - - - - - 0.25 0.25 - 0.50 - - - - - - - - - - - paddb %xmm0, %xmm0 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 01234 |
| |
| # CHECK: [0,0] DeER. pcmpgtb %xmm0, %xmm0 |
| # CHECK-NEXT: [0,1] D=eER paddb %xmm0, %xmm0 |
| # CHECK-NEXT: [1,0] DeE-R pcmpgtb %xmm0, %xmm0 |
| # CHECK-NEXT: [1,1] D=eER paddb %xmm0, %xmm0 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 2 1.0 1.0 0.5 pcmpgtb %xmm0, %xmm0 |
| # CHECK-NEXT: 1. 2 2.0 0.0 0.0 paddb %xmm0, %xmm0 |
| # CHECK-NEXT: 2 1.5 0.5 0.3 <total> |
| |
| # CHECK: [15] Code Region |
| |
| # CHECK: Iterations: 10000 |
| # CHECK-NEXT: Instructions: 20000 |
| # CHECK-NEXT: Total Cycles: 5004 |
| # CHECK-NEXT: Total uOps: 20000 |
| |
| # CHECK: Dispatch Width: 6 |
| # CHECK-NEXT: uOps Per Cycle: 4.00 |
| # CHECK-NEXT: IPC: 4.00 |
| # CHECK-NEXT: Block RThroughput: 0.5 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 0.25 pcmpgtw %xmm0, %xmm0 |
| # CHECK-NEXT: 1 1 0.25 paddw %xmm0, %xmm0 |
| |
| # CHECK: Register File statistics: |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #1 -- Zn3FpPRF: |
| # CHECK-NEXT: Number of physical registers: 160 |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #2 -- Zn3IntegerPRF: |
| # CHECK-NEXT: Number of physical registers: 192 |
| # CHECK-NEXT: Total number of mappings created: 0 |
| # CHECK-NEXT: Max number of mappings used: 0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn3AGU0 |
| # CHECK-NEXT: [1] - Zn3AGU1 |
| # CHECK-NEXT: [2] - Zn3AGU2 |
| # CHECK-NEXT: [3] - Zn3ALU0 |
| # CHECK-NEXT: [4] - Zn3ALU1 |
| # CHECK-NEXT: [5] - Zn3ALU2 |
| # CHECK-NEXT: [6] - Zn3ALU3 |
| # CHECK-NEXT: [7] - Zn3BRU1 |
| # CHECK-NEXT: [8] - Zn3FP0 |
| # CHECK-NEXT: [9] - Zn3FP1 |
| # CHECK-NEXT: [10] - Zn3FP2 |
| # CHECK-NEXT: [11] - Zn3FP3 |
| # CHECK-NEXT: [12.0] - Zn3FP45 |
| # CHECK-NEXT: [12.1] - Zn3FP45 |
| # CHECK-NEXT: [13] - Zn3FPSt |
| # CHECK-NEXT: [14.0] - Zn3LSU |
| # CHECK-NEXT: [14.1] - Zn3LSU |
| # CHECK-NEXT: [14.2] - Zn3LSU |
| # CHECK-NEXT: [15.0] - Zn3Load |
| # CHECK-NEXT: [15.1] - Zn3Load |
| # CHECK-NEXT: [15.2] - Zn3Load |
| # CHECK-NEXT: [16.0] - Zn3Store |
| # CHECK-NEXT: [16.1] - Zn3Store |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions: |
| # CHECK-NEXT: - - - - - - - - 0.25 0.25 0.50 - - - - - - - - - - - - pcmpgtw %xmm0, %xmm0 |
| # CHECK-NEXT: - - - - - - - - 0.25 0.25 - 0.50 - - - - - - - - - - - paddw %xmm0, %xmm0 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 01234 |
| |
| # CHECK: [0,0] DeER. pcmpgtw %xmm0, %xmm0 |
| # CHECK-NEXT: [0,1] D=eER paddw %xmm0, %xmm0 |
| # CHECK-NEXT: [1,0] DeE-R pcmpgtw %xmm0, %xmm0 |
| # CHECK-NEXT: [1,1] D=eER paddw %xmm0, %xmm0 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 2 1.0 1.0 0.5 pcmpgtw %xmm0, %xmm0 |
| # CHECK-NEXT: 1. 2 2.0 0.0 0.0 paddw %xmm0, %xmm0 |
| # CHECK-NEXT: 2 1.5 0.5 0.3 <total> |
| |
| # CHECK: [16] Code Region |
| |
| # CHECK: Iterations: 10000 |
| # CHECK-NEXT: Instructions: 20000 |
| # CHECK-NEXT: Total Cycles: 5004 |
| # CHECK-NEXT: Total uOps: 20000 |
| |
| # CHECK: Dispatch Width: 6 |
| # CHECK-NEXT: uOps Per Cycle: 4.00 |
| # CHECK-NEXT: IPC: 4.00 |
| # CHECK-NEXT: Block RThroughput: 0.5 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 0.25 pcmpgtd %xmm0, %xmm0 |
| # CHECK-NEXT: 1 1 0.25 paddd %xmm0, %xmm0 |
| |
| # CHECK: Register File statistics: |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #1 -- Zn3FpPRF: |
| # CHECK-NEXT: Number of physical registers: 160 |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #2 -- Zn3IntegerPRF: |
| # CHECK-NEXT: Number of physical registers: 192 |
| # CHECK-NEXT: Total number of mappings created: 0 |
| # CHECK-NEXT: Max number of mappings used: 0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn3AGU0 |
| # CHECK-NEXT: [1] - Zn3AGU1 |
| # CHECK-NEXT: [2] - Zn3AGU2 |
| # CHECK-NEXT: [3] - Zn3ALU0 |
| # CHECK-NEXT: [4] - Zn3ALU1 |
| # CHECK-NEXT: [5] - Zn3ALU2 |
| # CHECK-NEXT: [6] - Zn3ALU3 |
| # CHECK-NEXT: [7] - Zn3BRU1 |
| # CHECK-NEXT: [8] - Zn3FP0 |
| # CHECK-NEXT: [9] - Zn3FP1 |
| # CHECK-NEXT: [10] - Zn3FP2 |
| # CHECK-NEXT: [11] - Zn3FP3 |
| # CHECK-NEXT: [12.0] - Zn3FP45 |
| # CHECK-NEXT: [12.1] - Zn3FP45 |
| # CHECK-NEXT: [13] - Zn3FPSt |
| # CHECK-NEXT: [14.0] - Zn3LSU |
| # CHECK-NEXT: [14.1] - Zn3LSU |
| # CHECK-NEXT: [14.2] - Zn3LSU |
| # CHECK-NEXT: [15.0] - Zn3Load |
| # CHECK-NEXT: [15.1] - Zn3Load |
| # CHECK-NEXT: [15.2] - Zn3Load |
| # CHECK-NEXT: [16.0] - Zn3Store |
| # CHECK-NEXT: [16.1] - Zn3Store |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions: |
| # CHECK-NEXT: - - - - - - - - 0.25 0.25 0.50 - - - - - - - - - - - - pcmpgtd %xmm0, %xmm0 |
| # CHECK-NEXT: - - - - - - - - 0.25 0.25 - 0.50 - - - - - - - - - - - paddd %xmm0, %xmm0 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 01234 |
| |
| # CHECK: [0,0] DeER. pcmpgtd %xmm0, %xmm0 |
| # CHECK-NEXT: [0,1] D=eER paddd %xmm0, %xmm0 |
| # CHECK-NEXT: [1,0] DeE-R pcmpgtd %xmm0, %xmm0 |
| # CHECK-NEXT: [1,1] D=eER paddd %xmm0, %xmm0 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 2 1.0 1.0 0.5 pcmpgtd %xmm0, %xmm0 |
| # CHECK-NEXT: 1. 2 2.0 0.0 0.0 paddd %xmm0, %xmm0 |
| # CHECK-NEXT: 2 1.5 0.5 0.3 <total> |
| |
| # CHECK: [17] Code Region |
| |
| # CHECK: Iterations: 10000 |
| # CHECK-NEXT: Instructions: 20000 |
| # CHECK-NEXT: Total Cycles: 5004 |
| # CHECK-NEXT: Total uOps: 20000 |
| |
| # CHECK: Dispatch Width: 6 |
| # CHECK-NEXT: uOps Per Cycle: 4.00 |
| # CHECK-NEXT: IPC: 4.00 |
| # CHECK-NEXT: Block RThroughput: 0.5 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 0.25 pcmpgtq %xmm0, %xmm0 |
| # CHECK-NEXT: 1 1 0.25 paddq %xmm0, %xmm0 |
| |
| # CHECK: Register File statistics: |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #1 -- Zn3FpPRF: |
| # CHECK-NEXT: Number of physical registers: 160 |
| # CHECK-NEXT: Total number of mappings created: 10000 |
| # CHECK-NEXT: Max number of mappings used: 37 |
| |
| # CHECK: * Register File #2 -- Zn3IntegerPRF: |
| # CHECK-NEXT: Number of physical registers: 192 |
| # CHECK-NEXT: Total number of mappings created: 0 |
| # CHECK-NEXT: Max number of mappings used: 0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn3AGU0 |
| # CHECK-NEXT: [1] - Zn3AGU1 |
| # CHECK-NEXT: [2] - Zn3AGU2 |
| # CHECK-NEXT: [3] - Zn3ALU0 |
| # CHECK-NEXT: [4] - Zn3ALU1 |
| # CHECK-NEXT: [5] - Zn3ALU2 |
| # CHECK-NEXT: [6] - Zn3ALU3 |
| # CHECK-NEXT: [7] - Zn3BRU1 |
| # CHECK-NEXT: [8] - Zn3FP0 |
| # CHECK-NEXT: [9] - Zn3FP1 |
| # CHECK-NEXT: [10] - Zn3FP2 |
| # CHECK-NEXT: [11] - Zn3FP3 |
| # CHECK-NEXT: [12.0] - Zn3FP45 |
| # CHECK-NEXT: [12.1] - Zn3FP45 |
| # CHECK-NEXT: [13] - Zn3FPSt |
| # CHECK-NEXT: [14.0] - Zn3LSU |
| # CHECK-NEXT: [14.1] - Zn3LSU |
| # CHECK-NEXT: [14.2] - Zn3LSU |
| # CHECK-NEXT: [15.0] - Zn3Load |
| # CHECK-NEXT: [15.1] - Zn3Load |
| # CHECK-NEXT: [15.2] - Zn3Load |
| # CHECK-NEXT: [16.0] - Zn3Store |
| # CHECK-NEXT: [16.1] - Zn3Store |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] |
| # CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions: |
| # CHECK-NEXT: - - - - - - - - 0.25 0.25 0.50 - - - - - - - - - - - - pcmpgtq %xmm0, %xmm0 |
| # CHECK-NEXT: - - - - - - - - 0.25 0.25 - 0.50 - - - - - - - - - - - paddq %xmm0, %xmm0 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 01234 |
| |
| # CHECK: [0,0] DeER. pcmpgtq %xmm0, %xmm0 |
| # CHECK-NEXT: [0,1] D=eER paddq %xmm0, %xmm0 |
| # CHECK-NEXT: [1,0] DeE-R pcmpgtq %xmm0, %xmm0 |
| # CHECK-NEXT: [1,1] D=eER paddq %xmm0, %xmm0 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 2 1.0 1.0 0.5 pcmpgtq %xmm0, %xmm0 |
| # CHECK-NEXT: 1. 2 2.0 0.0 0.0 paddq %xmm0, %xmm0 |
| # CHECK-NEXT: 2 1.5 0.5 0.3 <total> |
