blob: e9394a7207388932421f9546c30bedb9579e6f9e [file] [log] [blame]
; RUN: llc -mtriple=arm-apple-darwin %s -o - | FileCheck %s
; RUN: llc -mtriple=arm-eabi -mattr=+vfp2 %s -o - \
; RUN: | FileCheck %s --check-prefix=CHECK-VFP
; RUN: llc -mtriple=thumbv7-apple-darwin -mattr=+neon,+thumb2 %s -o - \
; RUN: | FileCheck %s --check-prefix=CHECK-NEON
define i32 @f1(i32 %a.s) {
;CHECK-LABEL: f1:
;CHECK: moveq
entry:
%tmp = icmp eq i32 %a.s, 4
%tmp1.s = select i1 %tmp, i32 2, i32 3
ret i32 %tmp1.s
}
define i32 @f2(i32 %a.s) {
;CHECK-LABEL: f2:
;CHECK: movgt
entry:
%tmp = icmp sgt i32 %a.s, 4
%tmp1.s = select i1 %tmp, i32 2, i32 3
ret i32 %tmp1.s
}
define i32 @f3(i32 %a.s, i32 %b.s) {
;CHECK-LABEL: f3:
;CHECK: movlt
entry:
%tmp = icmp slt i32 %a.s, %b.s
%tmp1.s = select i1 %tmp, i32 2, i32 3
ret i32 %tmp1.s
}
define i32 @f4(i32 %a.s, i32 %b.s) {
;CHECK-LABEL: f4:
;CHECK: movle
entry:
%tmp = icmp sle i32 %a.s, %b.s
%tmp1.s = select i1 %tmp, i32 2, i32 3
ret i32 %tmp1.s
}
define i32 @f5(i32 %a.u, i32 %b.u) {
;CHECK-LABEL: f5:
;CHECK: movls
entry:
%tmp = icmp ule i32 %a.u, %b.u
%tmp1.s = select i1 %tmp, i32 2, i32 3
ret i32 %tmp1.s
}
define i32 @f6(i32 %a.u, i32 %b.u) {
;CHECK-LABEL: f6:
;CHECK: movhi
entry:
%tmp = icmp ugt i32 %a.u, %b.u
%tmp1.s = select i1 %tmp, i32 2, i32 3
ret i32 %tmp1.s
}
define double @f7(double %a, double %b) {
;CHECK-LABEL: f7:
;CHECK: movlt
;CHECK: movge
;CHECK-VFP-LABEL: f7:
;CHECK-VFP: vmovmi
%tmp = fcmp olt double %a, 1.234e+00
%tmp1 = select i1 %tmp, double -1.000e+00, double %b
ret double %tmp1
}
; <rdar://problem/7260094>
;
; We used to generate really horrible code for this function. The main cause was
; a lack of a custom lowering routine for an ISD::SELECT. This would result in
; two "it" blocks in the code: one for the "icmp" and another to move the index
; into the constant pool based on the value of the "icmp". If we have one "it"
; block generated, odds are good that we have close to the ideal code for this:
;
; CHECK-NEON-LABEL: f8:
; CHECK-NEON: movw [[R3:r[0-9]+]], #1123
; CHECK-NEON: adr [[R2:r[0-9]+]], LCPI7_0
; CHECK-NEON-NEXT: cmp r0, [[R3]]
; CHECK-NEON-NEXT: it eq
; CHECK-NEON-NEXT: addeq{{.*}} [[R2]], #4
; CHECK-NEON-NEXT: ldr
; CHECK-NEON: bx
define arm_apcscc float @f8(i32 %a) nounwind {
%tmp = icmp eq i32 %a, 1123
%tmp1 = select i1 %tmp, float 0x3FF3BE76C0000000, float 0x40030E9A20000000
ret float %tmp1
}
; <rdar://problem/9049552>
; Glue values can only have a single use, but the following test exposed a
; case where a SELECT was lowered with 2 uses of a comparison, causing the
; scheduler to assert.
; CHECK-VFP-LABEL: f9:
declare i8* @objc_msgSend(i8*, i8*, ...)
define void @f9() optsize {
entry:
%cmp = icmp eq i8* undef, inttoptr (i32 4 to i8*)
%conv191 = select i1 %cmp, float -3.000000e+00, float 0.000000e+00
%conv195 = select i1 %cmp, double -1.000000e+00, double 0.000000e+00
%add = fadd double %conv195, 1.100000e+01
%conv196 = fptrunc double %add to float
%add201 = fadd float undef, %conv191
%tmp484 = bitcast float %conv196 to i32
%tmp478 = bitcast float %add201 to i32
%tmp490 = insertvalue [2 x i32] undef, i32 %tmp484, 0
%tmp493 = insertvalue [2 x i32] %tmp490, i32 %tmp478, 1
call void bitcast (i8* (i8*, i8*, ...)* @objc_msgSend to void (i8*, i8*, [2 x i32], i32, float)*)(i8* undef, i8* undef, [2 x i32] %tmp493, i32 0, float 1.000000e+00) optsize
ret void
}
; CHECK-LABEL: f10:
define float @f10(i32 %a, i32 %b) nounwind uwtable readnone ssp {
; CHECK-NOT: floatsisf
%1 = icmp eq i32 %a, %b
%2 = zext i1 %1 to i32
%3 = sitofp i32 %2 to float
ret float %3
}
; CHECK-LABEL: f11:
define float @f11(i32 %a, i32 %b) nounwind uwtable readnone ssp {
; CHECK-NOT: floatsisf
%1 = icmp eq i32 %a, %b
%2 = sitofp i1 %1 to float
ret float %2
}
; CHECK-LABEL: f12:
define float @f12(i32 %a, i32 %b) nounwind uwtable readnone ssp {
; CHECK-NOT: floatunsisf
%1 = icmp eq i32 %a, %b
%2 = uitofp i1 %1 to float
ret float %2
}