test/CodeGen/AArch64/GlobalISel/localizer.mir

# RUN: llc -O0 -mtriple=aarch64-apple-ios -run-pass=localizer -verify-machineinstrs -global-isel %s -o - | FileCheck %s -check-prefix=CHECK

# Test the localizer.

--- |
  target datalayout = "e-m:o-i64:64-i128:128-n32:64-S128"

  define void @local_use() { ret void }
  define void @non_local_1use() { ret void }
  define void @non_local_2uses() { ret void }
  define void @non_local_phi_use() { ret void }
  define void @non_local_phi_use_followed_by_use() { ret void }
  define void @non_local_phi_use_followed_by_use_fi() { ret void }
  define void @float_non_local_phi_use_followed_by_use_fi() { ret void }
  define void @non_local_phi() { ret void }
...

---
# CHECK-LABEL: name: local_use
name:            local_use
legalized:       true
regBankSelected: true

# CHECK:      registers:
registers:
  - { id: 0, class: gpr }
  - { id: 1, class: gpr }
  - { id: 2, class: gpr }

# CHECK:  body:
# CHECK:    %0(s32) = G_CONSTANT 1
# CHECK-NEXT: %1(s32) = G_ADD %0, %0
body:             |
  bb.0:
    %0(s32) = G_CONSTANT 1
    %1(s32) = G_ADD %0, %0
...

---
# CHECK-LABEL: name: non_local_1use
name:            non_local_1use
legalized:       true
regBankSelected: true

# CHECK:      registers:
# Existing registers should be left untouched
# CHECK:  - { id: 0, class: gpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 1, class: gpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 2, class: gpr, preferred-register: '' }
# The newly created reg should be on the same regbank/regclass as its origin.
#CHECK-NEXT:  - { id: 3, class: gpr, preferred-register: '' }

registers:
  - { id: 0, class: gpr }
  - { id: 1, class: gpr }
  - { id: 2, class: gpr }

# CHECK:  body:
# CHECK:    %0(s32) = G_CONSTANT 1
# CHECK-NEXT: %1(s32) = G_ADD %0, %0

# CHECK: bb.1:
# CHECK: %3(s32) = G_CONSTANT 1
# CHECK-NEXT: %2(s32) = G_ADD %3, %1
body:             |
  bb.0:
    successors: %bb.1

    %0(s32) = G_CONSTANT 1
    %1(s32) = G_ADD %0, %0

  bb.1:
    %2(s32) = G_ADD %0, %1
...


---
# CHECK-LABEL: name: non_local_2uses
name:            non_local_2uses
legalized:       true
regBankSelected: true

# CHECK:      registers:
# Existing registers should be left untouched
# CHECK:  - { id: 0, class: gpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 1, class: gpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 2, class: gpr, preferred-register: '' }
# The newly created reg should be on the same regbank/regclass as its origin.
#CHECK-NEXT:  - { id: 3, class: gpr, preferred-register: '' }

registers:
  - { id: 0, class: gpr }
  - { id: 1, class: gpr }
  - { id: 2, class: gpr }

# CHECK:  body:
# CHECK:    %0(s32) = G_CONSTANT 1
# CHECK-NEXT: %1(s32) = G_ADD %0, %0

# CHECK: bb.1:
# CHECK: %3(s32) = G_CONSTANT 1
# CHECK-NEXT: %2(s32) = G_ADD %3, %3
body:             |
  bb.0:
    successors: %bb.1

    %0(s32) = G_CONSTANT 1
    %1(s32) = G_ADD %0, %0

  bb.1:
    %2(s32) = G_ADD %0, %0
...

---
# CHECK-LABEL: name: non_local_phi_use
name:            non_local_phi_use
legalized:       true
regBankSelected: true
tracksRegLiveness: true

# CHECK:      registers:
# Existing registers should be left untouched
# CHECK:  - { id: 0, class: gpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 1, class: gpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 2, class: gpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 3, class: gpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 4, class: gpr, preferred-register: '' }
# The newly created reg should be on the same regbank/regclass as its origin.
#CHECK-NEXT:  - { id: 5, class: gpr, preferred-register: '' }

registers:
  - { id: 0, class: gpr }
  - { id: 1, class: gpr }
  - { id: 2, class: gpr }
  - { id: 3, class: gpr }
  - { id: 4, class: gpr }

# CHECK:  body:
# CHECK:    %0(s32) = G_CONSTANT 1
# CHECK-NEXT: %1(s32) = G_ADD %0, %0

# CHECK: bb.1:
# CHECK: %5(s32) = G_CONSTANT 1

# CHECK: bb.2:
# CHECK: %3(s32) = PHI %5(s32), %bb.1
body:             |
  bb.0:
    successors: %bb.1

    %0(s32) = G_CONSTANT 1
    %1(s32) = G_ADD %0, %0

  bb.1:
    successors: %bb.2

  bb.2:
    %3(s32) = PHI %0(s32), %bb.1
    %2(s32) = G_ADD %3, %3
...

---
# CHECK-LABEL: name: non_local_phi_use_followed_by_use
name:            non_local_phi_use_followed_by_use
legalized:       true
regBankSelected: true
tracksRegLiveness: true

# CHECK:      registers:
# Existing registers should be left untouched
# CHECK:  - { id: 0, class: gpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 1, class: gpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 2, class: gpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 3, class: gpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 4, class: gpr, preferred-register: '' }
# The newly created regs should be on the same regbank/regclass as its origin.
#CHECK-NEXT:  - { id: 5, class: gpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 6, class: gpr, preferred-register: '' }

registers:
  - { id: 0, class: gpr }
  - { id: 1, class: gpr }
  - { id: 2, class: gpr }
  - { id: 3, class: gpr }
  - { id: 4, class: gpr }

# CHECK:  body:
# CHECK:    %0(s32) = G_CONSTANT 1
# CHECK-NEXT: %1(s32) = G_ADD %0, %0

# CHECK: bb.1:
# CHECK: %5(s32) = G_CONSTANT 1

# CHECK: bb.2:
# CHECK: %3(s32) = PHI %5(s32), %bb.1
# CHECK-NEXT: %6(s32) = G_CONSTANT 1
# CHECK-NEXT: %2(s32) = G_ADD %3, %6
body:             |
  bb.0:
    successors: %bb.1

    %0(s32) = G_CONSTANT 1
    %1(s32) = G_ADD %0, %0

  bb.1:
    successors: %bb.2

  bb.2:
    %3(s32) = PHI %0(s32), %bb.1
    %2(s32) = G_ADD %3, %0
...

---
# CHECK-LABEL: name: non_local_phi_use_followed_by_use_fi
name:            non_local_phi_use_followed_by_use_fi
legalized:       true
regBankSelected: true
tracksRegLiveness: true

# CHECK:      registers:
# Existing registers should be left untouched
# CHECK:  - { id: 0, class: gpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 1, class: gpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 2, class: gpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 3, class: gpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 4, class: gpr, preferred-register: '' }
# The newly created reg should be on the same regbank/regclass as its origin.
#CHECK-NEXT:  - { id: 5, class: gpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 6, class: gpr, preferred-register: '' }

registers:
  - { id: 0, class: gpr }
  - { id: 1, class: gpr }
  - { id: 2, class: gpr }
  - { id: 3, class: gpr }
  - { id: 4, class: gpr }

# CHECK:  body:
# CHECK:    %0(s32) = G_FRAME_INDEX 1
# CHECK-NEXT: %1(s32) = G_ADD %0, %0

# CHECK: bb.1:
# CHECK: %5(s32) = G_FRAME_INDEX 1

# CHECK: bb.2:
# CHECK: %3(s32) = PHI %5(s32), %bb.1
# CHECK-NEXT: %6(s32) = G_FRAME_INDEX 1
# CHECK-NEXT: %2(s32) = G_ADD %3, %6
body:             |
  bb.0:
    successors: %bb.1

    %0(s32) = G_FRAME_INDEX 1
    %1(s32) = G_ADD %0, %0

  bb.1:
    successors: %bb.2

  bb.2:
    %3(s32) = PHI %0(s32), %bb.1
    %2(s32) = G_ADD %3, %0
...

---
# CHECK-LABEL: name: float_non_local_phi_use_followed_by_use_fi
name:            float_non_local_phi_use_followed_by_use_fi
legalized:       true
regBankSelected: true
tracksRegLiveness: true

# CHECK:      registers:
# Existing registers should be left untouched
# CHECK:  - { id: 0, class: fpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 1, class: fpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 2, class: fpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 3, class: fpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 4, class: fpr, preferred-register: '' }
# The newly created reg should be on the same regbank/regclass as its origin.
#CHECK-NEXT:  - { id: 5, class: fpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 6, class: fpr, preferred-register: '' }

registers:
  - { id: 0, class: fpr }
  - { id: 1, class: fpr }
  - { id: 2, class: fpr }
  - { id: 3, class: fpr }
  - { id: 4, class: fpr }

# CHECK:  body:
# CHECK:    %0(s32) = G_FCONSTANT float 1.0
# CHECK-NEXT: %1(s32) = G_FADD %0, %0

# CHECK: bb.1:
# CHECK: %5(s32) = G_FCONSTANT float 1.0

# CHECK: bb.2:
# CHECK: %3(s32) = PHI %5(s32), %bb.1
# CHECK-NEXT: %6(s32) = G_FCONSTANT float 1.0
# CHECK-NEXT: %2(s32) = G_FADD %3, %6
body:             |
  bb.0:
    successors: %bb.1

    %0(s32) = G_FCONSTANT float 1.0
    %1(s32) = G_FADD %0, %0

  bb.1:
    successors: %bb.2

  bb.2:
    %3(s32) = PHI %0(s32), %bb.1
    %2(s32) = G_FADD %3, %0
...

---
# Make sure we don't insert a constant before PHIs.
# This used to happen for loops of one basic block.
# CHECK-LABEL: name: non_local_phi
name:            non_local_phi
legalized:       true
regBankSelected: true
tracksRegLiveness: true

# CHECK:      registers:
# Existing registers should be left untouched
# CHECK:  - { id: 0, class: fpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 1, class: fpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 2, class: fpr, preferred-register: '' }
#CHECK-NEXT:  - { id: 3, class: fpr, preferred-register: '' }
# The newly created reg should be on the same regbank/regclass as its origin.
#CHECK-NEXT:  - { id: 4, class: fpr, preferred-register: '' }

registers:
  - { id: 0, class: fpr }
  - { id: 1, class: fpr }
  - { id: 2, class: fpr }
  - { id: 3, class: fpr }

# CHECK:  body:
# CHECK:    %0(s32) = G_FCONSTANT float 1.0
# CHECK-NEXT: %1(s32) = G_FADD %0, %0

# CHECK: bb.1:
# CHECK: %3(s32) = PHI %1(s32), %bb.0, %4(s32), %bb.1
# CHECK: %4(s32) = G_FCONSTANT float 1.0

# CHECK-NEXT: %2(s32) = G_FADD %3, %1
body:             |
  bb.0:
    successors: %bb.1

    %0(s32) = G_FCONSTANT float 1.0
    %1(s32) = G_FADD %0, %0

  bb.1:
    successors: %bb.1

    %3(s32) = PHI %1(s32), %bb.0, %0(s32), %bb.1
    %2(s32) = G_FADD %3, %1
    G_BR %bb.1
...