| //===- Inliner.cpp - Code common to all inliners --------------------------===// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file is distributed under the University of Illinois Open Source |
| // License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file implements the mechanics required to implement inlining without |
| // missing any calls and updating the call graph. The decisions of which calls |
| // are profitable to inline are implemented elsewhere. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #define DEBUG_TYPE "inline" |
| #include "llvm/Transforms/IPO/InlinerPass.h" |
| #include "llvm/ADT/SmallPtrSet.h" |
| #include "llvm/ADT/Statistic.h" |
| #include "llvm/Analysis/CallGraph.h" |
| #include "llvm/Analysis/InlineCost.h" |
| #include "llvm/IR/DataLayout.h" |
| #include "llvm/IR/Instructions.h" |
| #include "llvm/IR/IntrinsicInst.h" |
| #include "llvm/IR/Module.h" |
| #include "llvm/Support/CallSite.h" |
| #include "llvm/Support/CommandLine.h" |
| #include "llvm/Support/Debug.h" |
| #include "llvm/Support/raw_ostream.h" |
| #include "llvm/Target/TargetLibraryInfo.h" |
| #include "llvm/Transforms/Utils/Cloning.h" |
| #include "llvm/Transforms/Utils/Local.h" |
| using namespace llvm; |
| |
| STATISTIC(NumInlined, "Number of functions inlined"); |
| STATISTIC(NumCallsDeleted, "Number of call sites deleted, not inlined"); |
| STATISTIC(NumDeleted, "Number of functions deleted because all callers found"); |
| STATISTIC(NumMergedAllocas, "Number of allocas merged together"); |
| |
| // This weirdly named statistic tracks the number of times that, when attempting |
| // to inline a function A into B, we analyze the callers of B in order to see |
| // if those would be more profitable and blocked inline steps. |
| STATISTIC(NumCallerCallersAnalyzed, "Number of caller-callers analyzed"); |
| |
| static cl::opt<int> |
| InlineLimit("inline-threshold", cl::Hidden, cl::init(225), cl::ZeroOrMore, |
| cl::desc("Control the amount of inlining to perform (default = 225)")); |
| |
| static cl::opt<int> |
| HintThreshold("inlinehint-threshold", cl::Hidden, cl::init(325), |
| cl::desc("Threshold for inlining functions with inline hint")); |
| |
| // Threshold to use when optsize is specified (and there is no -inline-limit). |
| const int OptSizeThreshold = 75; |
| |
| Inliner::Inliner(char &ID) |
| : CallGraphSCCPass(ID), InlineThreshold(InlineLimit), InsertLifetime(true) {} |
| |
| Inliner::Inliner(char &ID, int Threshold, bool InsertLifetime) |
| : CallGraphSCCPass(ID), InlineThreshold(InlineLimit.getNumOccurrences() > 0 ? |
| InlineLimit : Threshold), |
| InsertLifetime(InsertLifetime) {} |
| |
| /// getAnalysisUsage - For this class, we declare that we require and preserve |
| /// the call graph. If the derived class implements this method, it should |
| /// always explicitly call the implementation here. |
| void Inliner::getAnalysisUsage(AnalysisUsage &AU) const { |
| CallGraphSCCPass::getAnalysisUsage(AU); |
| } |
| |
| |
| typedef DenseMap<ArrayType*, std::vector<AllocaInst*> > |
| InlinedArrayAllocasTy; |
| |
| /// \brief If the inlined function had a higher stack protection level than the |
| /// calling function, then bump up the caller's stack protection level. |
| static void AdjustCallerSSPLevel(Function *Caller, Function *Callee) { |
| // If upgrading the SSP attribute, clear out the old SSP Attributes first. |
| // Having multiple SSP attributes doesn't actually hurt, but it adds useless |
| // clutter to the IR. |
| AttrBuilder B; |
| B.addAttribute(Attribute::StackProtect) |
| .addAttribute(Attribute::StackProtectStrong); |
| AttributeSet OldSSPAttr = AttributeSet::get(Caller->getContext(), |
| AttributeSet::FunctionIndex, |
| B); |
| AttributeSet CallerAttr = Caller->getAttributes(), |
| CalleeAttr = Callee->getAttributes(); |
| |
| if (CalleeAttr.hasAttribute(AttributeSet::FunctionIndex, |
| Attribute::StackProtectReq)) { |
| Caller->removeAttributes(AttributeSet::FunctionIndex, OldSSPAttr); |
| Caller->addFnAttr(Attribute::StackProtectReq); |
| } else if (CalleeAttr.hasAttribute(AttributeSet::FunctionIndex, |
| Attribute::StackProtectStrong) && |
| !CallerAttr.hasAttribute(AttributeSet::FunctionIndex, |
| Attribute::StackProtectReq)) { |
| Caller->removeAttributes(AttributeSet::FunctionIndex, OldSSPAttr); |
| Caller->addFnAttr(Attribute::StackProtectStrong); |
| } else if (CalleeAttr.hasAttribute(AttributeSet::FunctionIndex, |
| Attribute::StackProtect) && |
| !CallerAttr.hasAttribute(AttributeSet::FunctionIndex, |
| Attribute::StackProtectReq) && |
| !CallerAttr.hasAttribute(AttributeSet::FunctionIndex, |
| Attribute::StackProtectStrong)) |
| Caller->addFnAttr(Attribute::StackProtect); |
| } |
| |
| /// InlineCallIfPossible - If it is possible to inline the specified call site, |
| /// do so and update the CallGraph for this operation. |
| /// |
| /// This function also does some basic book-keeping to update the IR. The |
| /// InlinedArrayAllocas map keeps track of any allocas that are already |
| /// available from other functions inlined into the caller. If we are able to |
| /// inline this call site we attempt to reuse already available allocas or add |
| /// any new allocas to the set if not possible. |
| static bool InlineCallIfPossible(CallSite CS, InlineFunctionInfo &IFI, |
| InlinedArrayAllocasTy &InlinedArrayAllocas, |
| int InlineHistory, bool InsertLifetime, |
| const DataLayout *TD) { |
| Function *Callee = CS.getCalledFunction(); |
| Function *Caller = CS.getCaller(); |
| |
| // Try to inline the function. Get the list of static allocas that were |
| // inlined. |
| if (!InlineFunction(CS, IFI, InsertLifetime)) |
| return false; |
| |
| AdjustCallerSSPLevel(Caller, Callee); |
| |
| // Look at all of the allocas that we inlined through this call site. If we |
| // have already inlined other allocas through other calls into this function, |
| // then we know that they have disjoint lifetimes and that we can merge them. |
| // |
| // There are many heuristics possible for merging these allocas, and the |
| // different options have different tradeoffs. One thing that we *really* |
| // don't want to hurt is SRoA: once inlining happens, often allocas are no |
| // longer address taken and so they can be promoted. |
| // |
| // Our "solution" for that is to only merge allocas whose outermost type is an |
| // array type. These are usually not promoted because someone is using a |
| // variable index into them. These are also often the most important ones to |
| // merge. |
| // |
| // A better solution would be to have real memory lifetime markers in the IR |
| // and not have the inliner do any merging of allocas at all. This would |
| // allow the backend to do proper stack slot coloring of all allocas that |
| // *actually make it to the backend*, which is really what we want. |
| // |
| // Because we don't have this information, we do this simple and useful hack. |
| // |
| SmallPtrSet<AllocaInst*, 16> UsedAllocas; |
| |
| // When processing our SCC, check to see if CS was inlined from some other |
| // call site. For example, if we're processing "A" in this code: |
| // A() { B() } |
| // B() { x = alloca ... C() } |
| // C() { y = alloca ... } |
| // Assume that C was not inlined into B initially, and so we're processing A |
| // and decide to inline B into A. Doing this makes an alloca available for |
| // reuse and makes a callsite (C) available for inlining. When we process |
| // the C call site we don't want to do any alloca merging between X and Y |
| // because their scopes are not disjoint. We could make this smarter by |
| // keeping track of the inline history for each alloca in the |
| // InlinedArrayAllocas but this isn't likely to be a significant win. |
| if (InlineHistory != -1) // Only do merging for top-level call sites in SCC. |
| return true; |
| |
| // Loop over all the allocas we have so far and see if they can be merged with |
| // a previously inlined alloca. If not, remember that we had it. |
| for (unsigned AllocaNo = 0, e = IFI.StaticAllocas.size(); |
| AllocaNo != e; ++AllocaNo) { |
| AllocaInst *AI = IFI.StaticAllocas[AllocaNo]; |
| |
| // Don't bother trying to merge array allocations (they will usually be |
| // canonicalized to be an allocation *of* an array), or allocations whose |
| // type is not itself an array (because we're afraid of pessimizing SRoA). |
| ArrayType *ATy = dyn_cast<ArrayType>(AI->getAllocatedType()); |
| if (ATy == 0 || AI->isArrayAllocation()) |
| continue; |
| |
| // Get the list of all available allocas for this array type. |
| std::vector<AllocaInst*> &AllocasForType = InlinedArrayAllocas[ATy]; |
| |
| // Loop over the allocas in AllocasForType to see if we can reuse one. Note |
| // that we have to be careful not to reuse the same "available" alloca for |
| // multiple different allocas that we just inlined, we use the 'UsedAllocas' |
| // set to keep track of which "available" allocas are being used by this |
| // function. Also, AllocasForType can be empty of course! |
| bool MergedAwayAlloca = false; |
| for (unsigned i = 0, e = AllocasForType.size(); i != e; ++i) { |
| AllocaInst *AvailableAlloca = AllocasForType[i]; |
| |
| unsigned Align1 = AI->getAlignment(), |
| Align2 = AvailableAlloca->getAlignment(); |
| // If we don't have data layout information, and only one alloca is using |
| // the target default, then we can't safely merge them because we can't |
| // pick the greater alignment. |
| if (!TD && (!Align1 || !Align2) && Align1 != Align2) |
| continue; |
| |
| // The available alloca has to be in the right function, not in some other |
| // function in this SCC. |
| if (AvailableAlloca->getParent() != AI->getParent()) |
| continue; |
| |
| // If the inlined function already uses this alloca then we can't reuse |
| // it. |
| if (!UsedAllocas.insert(AvailableAlloca)) |
| continue; |
| |
| // Otherwise, we *can* reuse it, RAUW AI into AvailableAlloca and declare |
| // success! |
| DEBUG(dbgs() << " ***MERGED ALLOCA: " << *AI << "\n\t\tINTO: " |
| << *AvailableAlloca << '\n'); |
| |
| AI->replaceAllUsesWith(AvailableAlloca); |
| |
| if (Align1 != Align2) { |
| if (!Align1 || !Align2) { |
| assert(TD && "DataLayout required to compare default alignments"); |
| unsigned TypeAlign = TD->getABITypeAlignment(AI->getAllocatedType()); |
| |
| Align1 = Align1 ? Align1 : TypeAlign; |
| Align2 = Align2 ? Align2 : TypeAlign; |
| } |
| |
| if (Align1 > Align2) |
| AvailableAlloca->setAlignment(AI->getAlignment()); |
| } |
| |
| AI->eraseFromParent(); |
| MergedAwayAlloca = true; |
| ++NumMergedAllocas; |
| IFI.StaticAllocas[AllocaNo] = 0; |
| break; |
| } |
| |
| // If we already nuked the alloca, we're done with it. |
| if (MergedAwayAlloca) |
| continue; |
| |
| // If we were unable to merge away the alloca either because there are no |
| // allocas of the right type available or because we reused them all |
| // already, remember that this alloca came from an inlined function and mark |
| // it used so we don't reuse it for other allocas from this inline |
| // operation. |
| AllocasForType.push_back(AI); |
| UsedAllocas.insert(AI); |
| } |
| |
| return true; |
| } |
| |
| unsigned Inliner::getInlineThreshold(CallSite CS) const { |
| int thres = InlineThreshold; // -inline-threshold or else selected by |
| // overall opt level |
| |
| // If -inline-threshold is not given, listen to the optsize attribute when it |
| // would decrease the threshold. |
| Function *Caller = CS.getCaller(); |
| bool OptSize = Caller && !Caller->isDeclaration() && |
| Caller->getAttributes().hasAttribute(AttributeSet::FunctionIndex, |
| Attribute::OptimizeForSize); |
| if (!(InlineLimit.getNumOccurrences() > 0) && OptSize && |
| OptSizeThreshold < thres) |
| thres = OptSizeThreshold; |
| |
| // Listen to the inlinehint attribute when it would increase the threshold |
| // and the caller does not need to minimize its size. |
| Function *Callee = CS.getCalledFunction(); |
| bool InlineHint = Callee && !Callee->isDeclaration() && |
| Callee->getAttributes().hasAttribute(AttributeSet::FunctionIndex, |
| Attribute::InlineHint); |
| if (InlineHint && HintThreshold > thres |
| && !Caller->getAttributes().hasAttribute(AttributeSet::FunctionIndex, |
| Attribute::MinSize)) |
| thres = HintThreshold; |
| |
| return thres; |
| } |
| |
| /// shouldInline - Return true if the inliner should attempt to inline |
| /// at the given CallSite. |
| bool Inliner::shouldInline(CallSite CS) { |
| InlineCost IC = getInlineCost(CS); |
| |
| if (IC.isAlways()) { |
| DEBUG(dbgs() << " Inlining: cost=always" |
| << ", Call: " << *CS.getInstruction() << "\n"); |
| return true; |
| } |
| |
| if (IC.isNever()) { |
| DEBUG(dbgs() << " NOT Inlining: cost=never" |
| << ", Call: " << *CS.getInstruction() << "\n"); |
| return false; |
| } |
| |
| Function *Caller = CS.getCaller(); |
| if (!IC) { |
| DEBUG(dbgs() << " NOT Inlining: cost=" << IC.getCost() |
| << ", thres=" << (IC.getCostDelta() + IC.getCost()) |
| << ", Call: " << *CS.getInstruction() << "\n"); |
| return false; |
| } |
| |
| // Try to detect the case where the current inlining candidate caller (call |
| // it B) is a static or linkonce-ODR function and is an inlining candidate |
| // elsewhere, and the current candidate callee (call it C) is large enough |
| // that inlining it into B would make B too big to inline later. In these |
| // circumstances it may be best not to inline C into B, but to inline B into |
| // its callers. |
| // |
| // This only applies to static and linkonce-ODR functions because those are |
| // expected to be available for inlining in the translation units where they |
| // are used. Thus we will always have the opportunity to make local inlining |
| // decisions. Importantly the linkonce-ODR linkage covers inline functions |
| // and templates in C++. |
| // |
| // FIXME: All of this logic should be sunk into getInlineCost. It relies on |
| // the internal implementation of the inline cost metrics rather than |
| // treating them as truly abstract units etc. |
| if (Caller->hasLocalLinkage() || |
| Caller->getLinkage() == GlobalValue::LinkOnceODRLinkage) { |
| int TotalSecondaryCost = 0; |
| // The candidate cost to be imposed upon the current function. |
| int CandidateCost = IC.getCost() - (InlineConstants::CallPenalty + 1); |
| // This bool tracks what happens if we do NOT inline C into B. |
| bool callerWillBeRemoved = Caller->hasLocalLinkage(); |
| // This bool tracks what happens if we DO inline C into B. |
| bool inliningPreventsSomeOuterInline = false; |
| for (Value::use_iterator I = Caller->use_begin(), E =Caller->use_end(); |
| I != E; ++I) { |
| CallSite CS2(*I); |
| |
| // If this isn't a call to Caller (it could be some other sort |
| // of reference) skip it. Such references will prevent the caller |
| // from being removed. |
| if (!CS2 || CS2.getCalledFunction() != Caller) { |
| callerWillBeRemoved = false; |
| continue; |
| } |
| |
| InlineCost IC2 = getInlineCost(CS2); |
| ++NumCallerCallersAnalyzed; |
| if (!IC2) { |
| callerWillBeRemoved = false; |
| continue; |
| } |
| if (IC2.isAlways()) |
| continue; |
| |
| // See if inlining or original callsite would erase the cost delta of |
| // this callsite. We subtract off the penalty for the call instruction, |
| // which we would be deleting. |
| if (IC2.getCostDelta() <= CandidateCost) { |
| inliningPreventsSomeOuterInline = true; |
| TotalSecondaryCost += IC2.getCost(); |
| } |
| } |
| // If all outer calls to Caller would get inlined, the cost for the last |
| // one is set very low by getInlineCost, in anticipation that Caller will |
| // be removed entirely. We did not account for this above unless there |
| // is only one caller of Caller. |
| if (callerWillBeRemoved && Caller->use_begin() != Caller->use_end()) |
| TotalSecondaryCost += InlineConstants::LastCallToStaticBonus; |
| |
| if (inliningPreventsSomeOuterInline && TotalSecondaryCost < IC.getCost()) { |
| DEBUG(dbgs() << " NOT Inlining: " << *CS.getInstruction() << |
| " Cost = " << IC.getCost() << |
| ", outer Cost = " << TotalSecondaryCost << '\n'); |
| return false; |
| } |
| } |
| |
| DEBUG(dbgs() << " Inlining: cost=" << IC.getCost() |
| << ", thres=" << (IC.getCostDelta() + IC.getCost()) |
| << ", Call: " << *CS.getInstruction() << '\n'); |
| return true; |
| } |
| |
| /// InlineHistoryIncludes - Return true if the specified inline history ID |
| /// indicates an inline history that includes the specified function. |
| static bool InlineHistoryIncludes(Function *F, int InlineHistoryID, |
| const SmallVectorImpl<std::pair<Function*, int> > &InlineHistory) { |
| while (InlineHistoryID != -1) { |
| assert(unsigned(InlineHistoryID) < InlineHistory.size() && |
| "Invalid inline history ID"); |
| if (InlineHistory[InlineHistoryID].first == F) |
| return true; |
| InlineHistoryID = InlineHistory[InlineHistoryID].second; |
| } |
| return false; |
| } |
| |
| bool Inliner::runOnSCC(CallGraphSCC &SCC) { |
| CallGraph &CG = getAnalysis<CallGraph>(); |
| const DataLayout *TD = getAnalysisIfAvailable<DataLayout>(); |
| const TargetLibraryInfo *TLI = getAnalysisIfAvailable<TargetLibraryInfo>(); |
| |
| SmallPtrSet<Function*, 8> SCCFunctions; |
| DEBUG(dbgs() << "Inliner visiting SCC:"); |
| for (CallGraphSCC::iterator I = SCC.begin(), E = SCC.end(); I != E; ++I) { |
| Function *F = (*I)->getFunction(); |
| if (F) SCCFunctions.insert(F); |
| DEBUG(dbgs() << " " << (F ? F->getName() : "INDIRECTNODE")); |
| } |
| |
| // Scan through and identify all call sites ahead of time so that we only |
| // inline call sites in the original functions, not call sites that result |
| // from inlining other functions. |
| SmallVector<std::pair<CallSite, int>, 16> CallSites; |
| |
| // When inlining a callee produces new call sites, we want to keep track of |
| // the fact that they were inlined from the callee. This allows us to avoid |
| // infinite inlining in some obscure cases. To represent this, we use an |
| // index into the InlineHistory vector. |
| SmallVector<std::pair<Function*, int>, 8> InlineHistory; |
| |
| for (CallGraphSCC::iterator I = SCC.begin(), E = SCC.end(); I != E; ++I) { |
| Function *F = (*I)->getFunction(); |
| if (!F) continue; |
| |
| for (Function::iterator BB = F->begin(), E = F->end(); BB != E; ++BB) |
| for (BasicBlock::iterator I = BB->begin(), E = BB->end(); I != E; ++I) { |
| CallSite CS(cast<Value>(I)); |
| // If this isn't a call, or it is a call to an intrinsic, it can |
| // never be inlined. |
| if (!CS || isa<IntrinsicInst>(I)) |
| continue; |
| |
| // If this is a direct call to an external function, we can never inline |
| // it. If it is an indirect call, inlining may resolve it to be a |
| // direct call, so we keep it. |
| if (CS.getCalledFunction() && CS.getCalledFunction()->isDeclaration()) |
| continue; |
| |
| CallSites.push_back(std::make_pair(CS, -1)); |
| } |
| } |
| |
| DEBUG(dbgs() << ": " << CallSites.size() << " call sites.\n"); |
| |
| // If there are no calls in this function, exit early. |
| if (CallSites.empty()) |
| return false; |
| |
| // Now that we have all of the call sites, move the ones to functions in the |
| // current SCC to the end of the list. |
| unsigned FirstCallInSCC = CallSites.size(); |
| for (unsigned i = 0; i < FirstCallInSCC; ++i) |
| if (Function *F = CallSites[i].first.getCalledFunction()) |
| if (SCCFunctions.count(F)) |
| std::swap(CallSites[i--], CallSites[--FirstCallInSCC]); |
| |
| |
| InlinedArrayAllocasTy InlinedArrayAllocas; |
| InlineFunctionInfo InlineInfo(&CG, TD); |
| |
| // Now that we have all of the call sites, loop over them and inline them if |
| // it looks profitable to do so. |
| bool Changed = false; |
| bool LocalChange; |
| do { |
| LocalChange = false; |
| // Iterate over the outer loop because inlining functions can cause indirect |
| // calls to become direct calls. |
| for (unsigned CSi = 0; CSi != CallSites.size(); ++CSi) { |
| CallSite CS = CallSites[CSi].first; |
| |
| Function *Caller = CS.getCaller(); |
| Function *Callee = CS.getCalledFunction(); |
| |
| // If this call site is dead and it is to a readonly function, we should |
| // just delete the call instead of trying to inline it, regardless of |
| // size. This happens because IPSCCP propagates the result out of the |
| // call and then we're left with the dead call. |
| if (isInstructionTriviallyDead(CS.getInstruction(), TLI)) { |
| DEBUG(dbgs() << " -> Deleting dead call: " |
| << *CS.getInstruction() << "\n"); |
| // Update the call graph by deleting the edge from Callee to Caller. |
| CG[Caller]->removeCallEdgeFor(CS); |
| CS.getInstruction()->eraseFromParent(); |
| ++NumCallsDeleted; |
| } else { |
| // We can only inline direct calls to non-declarations. |
| if (Callee == 0 || Callee->isDeclaration()) continue; |
| |
| // If this call site was obtained by inlining another function, verify |
| // that the include path for the function did not include the callee |
| // itself. If so, we'd be recursively inlining the same function, |
| // which would provide the same callsites, which would cause us to |
| // infinitely inline. |
| int InlineHistoryID = CallSites[CSi].second; |
| if (InlineHistoryID != -1 && |
| InlineHistoryIncludes(Callee, InlineHistoryID, InlineHistory)) |
| continue; |
| |
| |
| // If the policy determines that we should inline this function, |
| // try to do so. |
| if (!shouldInline(CS)) |
| continue; |
| |
| // Attempt to inline the function. |
| if (!InlineCallIfPossible(CS, InlineInfo, InlinedArrayAllocas, |
| InlineHistoryID, InsertLifetime, TD)) |
| continue; |
| ++NumInlined; |
| |
| // If inlining this function gave us any new call sites, throw them |
| // onto our worklist to process. They are useful inline candidates. |
| if (!InlineInfo.InlinedCalls.empty()) { |
| // Create a new inline history entry for this, so that we remember |
| // that these new callsites came about due to inlining Callee. |
| int NewHistoryID = InlineHistory.size(); |
| InlineHistory.push_back(std::make_pair(Callee, InlineHistoryID)); |
| |
| for (unsigned i = 0, e = InlineInfo.InlinedCalls.size(); |
| i != e; ++i) { |
| Value *Ptr = InlineInfo.InlinedCalls[i]; |
| CallSites.push_back(std::make_pair(CallSite(Ptr), NewHistoryID)); |
| } |
| } |
| } |
| |
| // If we inlined or deleted the last possible call site to the function, |
| // delete the function body now. |
| if (Callee && Callee->use_empty() && Callee->hasLocalLinkage() && |
| // TODO: Can remove if in SCC now. |
| !SCCFunctions.count(Callee) && |
| |
| // The function may be apparently dead, but if there are indirect |
| // callgraph references to the node, we cannot delete it yet, this |
| // could invalidate the CGSCC iterator. |
| CG[Callee]->getNumReferences() == 0) { |
| DEBUG(dbgs() << " -> Deleting dead function: " |
| << Callee->getName() << "\n"); |
| CallGraphNode *CalleeNode = CG[Callee]; |
| |
| // Remove any call graph edges from the callee to its callees. |
| CalleeNode->removeAllCalledFunctions(); |
| |
| // Removing the node for callee from the call graph and delete it. |
| delete CG.removeFunctionFromModule(CalleeNode); |
| ++NumDeleted; |
| } |
| |
| // Remove this call site from the list. If possible, use |
| // swap/pop_back for efficiency, but do not use it if doing so would |
| // move a call site to a function in this SCC before the |
| // 'FirstCallInSCC' barrier. |
| if (SCC.isSingular()) { |
| CallSites[CSi] = CallSites.back(); |
| CallSites.pop_back(); |
| } else { |
| CallSites.erase(CallSites.begin()+CSi); |
| } |
| --CSi; |
| |
| Changed = true; |
| LocalChange = true; |
| } |
| } while (LocalChange); |
| |
| return Changed; |
| } |
| |
| // doFinalization - Remove now-dead linkonce functions at the end of |
| // processing to avoid breaking the SCC traversal. |
| bool Inliner::doFinalization(CallGraph &CG) { |
| return removeDeadFunctions(CG); |
| } |
| |
| /// removeDeadFunctions - Remove dead functions that are not included in |
| /// DNR (Do Not Remove) list. |
| bool Inliner::removeDeadFunctions(CallGraph &CG, bool AlwaysInlineOnly) { |
| SmallVector<CallGraphNode*, 16> FunctionsToRemove; |
| |
| // Scan for all of the functions, looking for ones that should now be removed |
| // from the program. Insert the dead ones in the FunctionsToRemove set. |
| for (CallGraph::iterator I = CG.begin(), E = CG.end(); I != E; ++I) { |
| CallGraphNode *CGN = I->second; |
| Function *F = CGN->getFunction(); |
| if (!F || F->isDeclaration()) |
| continue; |
| |
| // Handle the case when this function is called and we only want to care |
| // about always-inline functions. This is a bit of a hack to share code |
| // between here and the InlineAlways pass. |
| if (AlwaysInlineOnly && |
| !F->getAttributes().hasAttribute(AttributeSet::FunctionIndex, |
| Attribute::AlwaysInline)) |
| continue; |
| |
| // If the only remaining users of the function are dead constants, remove |
| // them. |
| F->removeDeadConstantUsers(); |
| |
| if (!F->isDefTriviallyDead()) |
| continue; |
| |
| // Remove any call graph edges from the function to its callees. |
| CGN->removeAllCalledFunctions(); |
| |
| // Remove any edges from the external node to the function's call graph |
| // node. These edges might have been made irrelegant due to |
| // optimization of the program. |
| CG.getExternalCallingNode()->removeAnyCallEdgeTo(CGN); |
| |
| // Removing the node for callee from the call graph and delete it. |
| FunctionsToRemove.push_back(CGN); |
| } |
| if (FunctionsToRemove.empty()) |
| return false; |
| |
| // Now that we know which functions to delete, do so. We didn't want to do |
| // this inline, because that would invalidate our CallGraph::iterator |
| // objects. :( |
| // |
| // Note that it doesn't matter that we are iterating over a non-stable order |
| // here to do this, it doesn't matter which order the functions are deleted |
| // in. |
| array_pod_sort(FunctionsToRemove.begin(), FunctionsToRemove.end()); |
| FunctionsToRemove.erase(std::unique(FunctionsToRemove.begin(), |
| FunctionsToRemove.end()), |
| FunctionsToRemove.end()); |
| for (SmallVectorImpl<CallGraphNode *>::iterator I = FunctionsToRemove.begin(), |
| E = FunctionsToRemove.end(); |
| I != E; ++I) { |
| delete CG.removeFunctionFromModule(*I); |
| ++NumDeleted; |
| } |
| return true; |
| } |
