| //===- CodeMetrics.cpp - Code cost measurements ---------------------------===// | |
| // | |
| // The LLVM Compiler Infrastructure | |
| // | |
| // This file is distributed under the University of Illinois Open Source | |
| // License. See LICENSE.TXT for details. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| // This file implements code cost measurement utilities. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #include "llvm/Analysis/CodeMetrics.h" | |
| #include "llvm/Function.h" | |
| #include "llvm/Support/CallSite.h" | |
| #include "llvm/IntrinsicInst.h" | |
| #include "llvm/Target/TargetData.h" | |
| using namespace llvm; | |
| /// callIsSmall - If a call is likely to lower to a single target instruction, | |
| /// or is otherwise deemed small return true. | |
| /// TODO: Perhaps calls like memcpy, strcpy, etc? | |
| bool llvm::callIsSmall(const Function *F) { | |
| if (!F) return false; | |
| if (F->hasLocalLinkage()) return false; | |
| if (!F->hasName()) return false; | |
| StringRef Name = F->getName(); | |
| // These will all likely lower to a single selection DAG node. | |
| if (Name == "copysign" || Name == "copysignf" || Name == "copysignl" || | |
| Name == "fabs" || Name == "fabsf" || Name == "fabsl" || | |
| Name == "sin" || Name == "sinf" || Name == "sinl" || | |
| Name == "cos" || Name == "cosf" || Name == "cosl" || | |
| Name == "sqrt" || Name == "sqrtf" || Name == "sqrtl" ) | |
| return true; | |
| // These are all likely to be optimized into something smaller. | |
| if (Name == "pow" || Name == "powf" || Name == "powl" || | |
| Name == "exp2" || Name == "exp2l" || Name == "exp2f" || | |
| Name == "floor" || Name == "floorf" || Name == "ceil" || | |
| Name == "round" || Name == "ffs" || Name == "ffsl" || | |
| Name == "abs" || Name == "labs" || Name == "llabs") | |
| return true; | |
| return false; | |
| } | |
| bool llvm::isInstructionFree(const Instruction *I, const TargetData *TD) { | |
| if (isa<PHINode>(I)) | |
| return true; | |
| // If a GEP has all constant indices, it will probably be folded with | |
| // a load/store. | |
| if (const GetElementPtrInst *GEP = dyn_cast<GetElementPtrInst>(I)) | |
| return GEP->hasAllConstantIndices(); | |
| if (const IntrinsicInst *II = dyn_cast<IntrinsicInst>(I)) { | |
| switch (II->getIntrinsicID()) { | |
| default: | |
| return false; | |
| case Intrinsic::dbg_declare: | |
| case Intrinsic::dbg_value: | |
| case Intrinsic::invariant_start: | |
| case Intrinsic::invariant_end: | |
| case Intrinsic::lifetime_start: | |
| case Intrinsic::lifetime_end: | |
| case Intrinsic::objectsize: | |
| case Intrinsic::ptr_annotation: | |
| case Intrinsic::var_annotation: | |
| // These intrinsics don't count as size. | |
| return true; | |
| } | |
| } | |
| if (const CastInst *CI = dyn_cast<CastInst>(I)) { | |
| // Noop casts, including ptr <-> int, don't count. | |
| if (CI->isLosslessCast() || isa<IntToPtrInst>(CI) || isa<PtrToIntInst>(CI)) | |
| return true; | |
| // trunc to a native type is free (assuming the target has compare and | |
| // shift-right of the same width). | |
| if (TD && isa<TruncInst>(CI) && | |
| TD->isLegalInteger(TD->getTypeSizeInBits(CI->getType()))) | |
| return true; | |
| // Result of a cmp instruction is often extended (to be used by other | |
| // cmp instructions, logical or return instructions). These are usually | |
| // nop on most sane targets. | |
| if (isa<CmpInst>(CI->getOperand(0))) | |
| return true; | |
| } | |
| return false; | |
| } | |
| /// analyzeBasicBlock - Fill in the current structure with information gleaned | |
| /// from the specified block. | |
| void CodeMetrics::analyzeBasicBlock(const BasicBlock *BB, | |
| const TargetData *TD) { | |
| ++NumBlocks; | |
| unsigned NumInstsBeforeThisBB = NumInsts; | |
| for (BasicBlock::const_iterator II = BB->begin(), E = BB->end(); | |
| II != E; ++II) { | |
| if (isInstructionFree(II, TD)) | |
| continue; | |
| // Special handling for calls. | |
| if (isa<CallInst>(II) || isa<InvokeInst>(II)) { | |
| ImmutableCallSite CS(cast<Instruction>(II)); | |
| if (const Function *F = CS.getCalledFunction()) { | |
| // If a function is both internal and has a single use, then it is | |
| // extremely likely to get inlined in the future (it was probably | |
| // exposed by an interleaved devirtualization pass). | |
| if (!CS.isNoInline() && F->hasInternalLinkage() && F->hasOneUse()) | |
| ++NumInlineCandidates; | |
| // If this call is to function itself, then the function is recursive. | |
| // Inlining it into other functions is a bad idea, because this is | |
| // basically just a form of loop peeling, and our metrics aren't useful | |
| // for that case. | |
| if (F == BB->getParent()) | |
| isRecursive = true; | |
| } | |
| if (!isa<IntrinsicInst>(II) && !callIsSmall(CS.getCalledFunction())) { | |
| // Each argument to a call takes on average one instruction to set up. | |
| NumInsts += CS.arg_size(); | |
| // We don't want inline asm to count as a call - that would prevent loop | |
| // unrolling. The argument setup cost is still real, though. | |
| if (!isa<InlineAsm>(CS.getCalledValue())) | |
| ++NumCalls; | |
| } | |
| } | |
| if (const AllocaInst *AI = dyn_cast<AllocaInst>(II)) { | |
| if (!AI->isStaticAlloca()) | |
| this->usesDynamicAlloca = true; | |
| } | |
| if (isa<ExtractElementInst>(II) || II->getType()->isVectorTy()) | |
| ++NumVectorInsts; | |
| ++NumInsts; | |
| } | |
| if (isa<ReturnInst>(BB->getTerminator())) | |
| ++NumRets; | |
| // We never want to inline functions that contain an indirectbr. This is | |
| // incorrect because all the blockaddress's (in static global initializers | |
| // for example) would be referring to the original function, and this indirect | |
| // jump would jump from the inlined copy of the function into the original | |
| // function which is extremely undefined behavior. | |
| // FIXME: This logic isn't really right; we can safely inline functions | |
| // with indirectbr's as long as no other function or global references the | |
| // blockaddress of a block within the current function. And as a QOI issue, | |
| // if someone is using a blockaddress without an indirectbr, and that | |
| // reference somehow ends up in another function or global, we probably | |
| // don't want to inline this function. | |
| if (isa<IndirectBrInst>(BB->getTerminator())) | |
| containsIndirectBr = true; | |
| // Remember NumInsts for this BB. | |
| NumBBInsts[BB] = NumInsts - NumInstsBeforeThisBB; | |
| } | |
| void CodeMetrics::analyzeFunction(Function *F, const TargetData *TD) { | |
| // If this function contains a call that "returns twice" (e.g., setjmp or | |
| // _setjmp) and it isn't marked with "returns twice" itself, never inline it. | |
| // This is a hack because we depend on the user marking their local variables | |
| // as volatile if they are live across a setjmp call, and they probably | |
| // won't do this in callers. | |
| exposesReturnsTwice = F->callsFunctionThatReturnsTwice() && | |
| !F->hasFnAttr(Attribute::ReturnsTwice); | |
| // Look at the size of the callee. | |
| for (Function::const_iterator BB = F->begin(), E = F->end(); BB != E; ++BB) | |
| analyzeBasicBlock(&*BB, TD); | |
| } |