| //===- X86RegisterInfo.td - Describe the X86 Register File --*- tablegen -*-==// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file is distributed under the University of Illinois Open Source |
| // License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file describes the X86 Register file, defining the registers themselves, |
| // aliases between the registers, and the register classes built out of the |
| // registers. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| //===----------------------------------------------------------------------===// |
| // Register definitions... |
| // |
| let Namespace = "X86" in { |
| |
| // Subregister indices. |
| def sub_8bit : SubRegIndex; |
| def sub_8bit_hi : SubRegIndex; |
| def sub_16bit : SubRegIndex; |
| def sub_32bit : SubRegIndex; |
| |
| def sub_ss : SubRegIndex; |
| def sub_sd : SubRegIndex; |
| def sub_xmm : SubRegIndex; |
| |
| |
| // In the register alias definitions below, we define which registers alias |
| // which others. We only specify which registers the small registers alias, |
| // because the register file generator is smart enough to figure out that |
| // AL aliases AX if we tell it that AX aliased AL (for example). |
| |
| // Dwarf numbering is different for 32-bit and 64-bit, and there are |
| // variations by target as well. Currently the first entry is for X86-64, |
| // second - for EH on X86-32/Darwin and third is 'generic' one (X86-32/Linux |
| // and debug information on X86-32/Darwin) |
| |
| // 8-bit registers |
| // Low registers |
| def AL : Register<"al">, DwarfRegNum<[0, 0, 0]>; |
| def DL : Register<"dl">, DwarfRegNum<[1, 2, 2]>; |
| def CL : Register<"cl">, DwarfRegNum<[2, 1, 1]>; |
| def BL : Register<"bl">, DwarfRegNum<[3, 3, 3]>; |
| |
| // X86-64 only |
| def SIL : Register<"sil">, DwarfRegNum<[4, 6, 6]>; |
| def DIL : Register<"dil">, DwarfRegNum<[5, 7, 7]>; |
| def BPL : Register<"bpl">, DwarfRegNum<[6, 4, 5]>; |
| def SPL : Register<"spl">, DwarfRegNum<[7, 5, 4]>; |
| def R8B : Register<"r8b">, DwarfRegNum<[8, -2, -2]>; |
| def R9B : Register<"r9b">, DwarfRegNum<[9, -2, -2]>; |
| def R10B : Register<"r10b">, DwarfRegNum<[10, -2, -2]>; |
| def R11B : Register<"r11b">, DwarfRegNum<[11, -2, -2]>; |
| def R12B : Register<"r12b">, DwarfRegNum<[12, -2, -2]>; |
| def R13B : Register<"r13b">, DwarfRegNum<[13, -2, -2]>; |
| def R14B : Register<"r14b">, DwarfRegNum<[14, -2, -2]>; |
| def R15B : Register<"r15b">, DwarfRegNum<[15, -2, -2]>; |
| |
| // High registers. On x86-64, these cannot be used in any instruction |
| // with a REX prefix. |
| def AH : Register<"ah">, DwarfRegNum<[0, 0, 0]>; |
| def DH : Register<"dh">, DwarfRegNum<[1, 2, 2]>; |
| def CH : Register<"ch">, DwarfRegNum<[2, 1, 1]>; |
| def BH : Register<"bh">, DwarfRegNum<[3, 3, 3]>; |
| |
| // 16-bit registers |
| let SubRegIndices = [sub_8bit, sub_8bit_hi] in { |
| def AX : RegisterWithSubRegs<"ax", [AL,AH]>, DwarfRegNum<[0, 0, 0]>; |
| def DX : RegisterWithSubRegs<"dx", [DL,DH]>, DwarfRegNum<[1, 2, 2]>; |
| def CX : RegisterWithSubRegs<"cx", [CL,CH]>, DwarfRegNum<[2, 1, 1]>; |
| def BX : RegisterWithSubRegs<"bx", [BL,BH]>, DwarfRegNum<[3, 3, 3]>; |
| } |
| let SubRegIndices = [sub_8bit] in { |
| def SI : RegisterWithSubRegs<"si", [SIL]>, DwarfRegNum<[4, 6, 6]>; |
| def DI : RegisterWithSubRegs<"di", [DIL]>, DwarfRegNum<[5, 7, 7]>; |
| def BP : RegisterWithSubRegs<"bp", [BPL]>, DwarfRegNum<[6, 4, 5]>; |
| def SP : RegisterWithSubRegs<"sp", [SPL]>, DwarfRegNum<[7, 5, 4]>; |
| } |
| def IP : Register<"ip">, DwarfRegNum<[16]>; |
| |
| // X86-64 only |
| let SubRegIndices = [sub_8bit] in { |
| def R8W : RegisterWithSubRegs<"r8w", [R8B]>, DwarfRegNum<[8, -2, -2]>; |
| def R9W : RegisterWithSubRegs<"r9w", [R9B]>, DwarfRegNum<[9, -2, -2]>; |
| def R10W : RegisterWithSubRegs<"r10w", [R10B]>, DwarfRegNum<[10, -2, -2]>; |
| def R11W : RegisterWithSubRegs<"r11w", [R11B]>, DwarfRegNum<[11, -2, -2]>; |
| def R12W : RegisterWithSubRegs<"r12w", [R12B]>, DwarfRegNum<[12, -2, -2]>; |
| def R13W : RegisterWithSubRegs<"r13w", [R13B]>, DwarfRegNum<[13, -2, -2]>; |
| def R14W : RegisterWithSubRegs<"r14w", [R14B]>, DwarfRegNum<[14, -2, -2]>; |
| def R15W : RegisterWithSubRegs<"r15w", [R15B]>, DwarfRegNum<[15, -2, -2]>; |
| } |
| // 32-bit registers |
| let SubRegIndices = [sub_16bit] in { |
| def EAX : RegisterWithSubRegs<"eax", [AX]>, DwarfRegNum<[0, 0, 0]>; |
| def EDX : RegisterWithSubRegs<"edx", [DX]>, DwarfRegNum<[1, 2, 2]>; |
| def ECX : RegisterWithSubRegs<"ecx", [CX]>, DwarfRegNum<[2, 1, 1]>; |
| def EBX : RegisterWithSubRegs<"ebx", [BX]>, DwarfRegNum<[3, 3, 3]>; |
| def ESI : RegisterWithSubRegs<"esi", [SI]>, DwarfRegNum<[4, 6, 6]>; |
| def EDI : RegisterWithSubRegs<"edi", [DI]>, DwarfRegNum<[5, 7, 7]>; |
| def EBP : RegisterWithSubRegs<"ebp", [BP]>, DwarfRegNum<[6, 4, 5]>; |
| def ESP : RegisterWithSubRegs<"esp", [SP]>, DwarfRegNum<[7, 5, 4]>; |
| def EIP : RegisterWithSubRegs<"eip", [IP]>, DwarfRegNum<[16, 8, 8]>; |
| |
| // X86-64 only |
| def R8D : RegisterWithSubRegs<"r8d", [R8W]>, DwarfRegNum<[8, -2, -2]>; |
| def R9D : RegisterWithSubRegs<"r9d", [R9W]>, DwarfRegNum<[9, -2, -2]>; |
| def R10D : RegisterWithSubRegs<"r10d", [R10W]>, DwarfRegNum<[10, -2, -2]>; |
| def R11D : RegisterWithSubRegs<"r11d", [R11W]>, DwarfRegNum<[11, -2, -2]>; |
| def R12D : RegisterWithSubRegs<"r12d", [R12W]>, DwarfRegNum<[12, -2, -2]>; |
| def R13D : RegisterWithSubRegs<"r13d", [R13W]>, DwarfRegNum<[13, -2, -2]>; |
| def R14D : RegisterWithSubRegs<"r14d", [R14W]>, DwarfRegNum<[14, -2, -2]>; |
| def R15D : RegisterWithSubRegs<"r15d", [R15W]>, DwarfRegNum<[15, -2, -2]>; |
| } |
| |
| // 64-bit registers, X86-64 only |
| let SubRegIndices = [sub_32bit] in { |
| def RAX : RegisterWithSubRegs<"rax", [EAX]>, DwarfRegNum<[0, -2, -2]>; |
| def RDX : RegisterWithSubRegs<"rdx", [EDX]>, DwarfRegNum<[1, -2, -2]>; |
| def RCX : RegisterWithSubRegs<"rcx", [ECX]>, DwarfRegNum<[2, -2, -2]>; |
| def RBX : RegisterWithSubRegs<"rbx", [EBX]>, DwarfRegNum<[3, -2, -2]>; |
| def RSI : RegisterWithSubRegs<"rsi", [ESI]>, DwarfRegNum<[4, -2, -2]>; |
| def RDI : RegisterWithSubRegs<"rdi", [EDI]>, DwarfRegNum<[5, -2, -2]>; |
| def RBP : RegisterWithSubRegs<"rbp", [EBP]>, DwarfRegNum<[6, -2, -2]>; |
| def RSP : RegisterWithSubRegs<"rsp", [ESP]>, DwarfRegNum<[7, -2, -2]>; |
| |
| def R8 : RegisterWithSubRegs<"r8", [R8D]>, DwarfRegNum<[8, -2, -2]>; |
| def R9 : RegisterWithSubRegs<"r9", [R9D]>, DwarfRegNum<[9, -2, -2]>; |
| def R10 : RegisterWithSubRegs<"r10", [R10D]>, DwarfRegNum<[10, -2, -2]>; |
| def R11 : RegisterWithSubRegs<"r11", [R11D]>, DwarfRegNum<[11, -2, -2]>; |
| def R12 : RegisterWithSubRegs<"r12", [R12D]>, DwarfRegNum<[12, -2, -2]>; |
| def R13 : RegisterWithSubRegs<"r13", [R13D]>, DwarfRegNum<[13, -2, -2]>; |
| def R14 : RegisterWithSubRegs<"r14", [R14D]>, DwarfRegNum<[14, -2, -2]>; |
| def R15 : RegisterWithSubRegs<"r15", [R15D]>, DwarfRegNum<[15, -2, -2]>; |
| def RIP : RegisterWithSubRegs<"rip", [EIP]>, DwarfRegNum<[16, -2, -2]>; |
| } |
| |
| // MMX Registers. These are actually aliased to ST0 .. ST7 |
| def MM0 : Register<"mm0">, DwarfRegNum<[41, 29, 29]>; |
| def MM1 : Register<"mm1">, DwarfRegNum<[42, 30, 30]>; |
| def MM2 : Register<"mm2">, DwarfRegNum<[43, 31, 31]>; |
| def MM3 : Register<"mm3">, DwarfRegNum<[44, 32, 32]>; |
| def MM4 : Register<"mm4">, DwarfRegNum<[45, 33, 33]>; |
| def MM5 : Register<"mm5">, DwarfRegNum<[46, 34, 34]>; |
| def MM6 : Register<"mm6">, DwarfRegNum<[47, 35, 35]>; |
| def MM7 : Register<"mm7">, DwarfRegNum<[48, 36, 36]>; |
| |
| // Pseudo Floating Point registers |
| def FP0 : Register<"fp0">; |
| def FP1 : Register<"fp1">; |
| def FP2 : Register<"fp2">; |
| def FP3 : Register<"fp3">; |
| def FP4 : Register<"fp4">; |
| def FP5 : Register<"fp5">; |
| def FP6 : Register<"fp6">; |
| |
| // XMM Registers, used by the various SSE instruction set extensions. |
| // The sub_ss and sub_sd subregs are the same registers with another regclass. |
| let CompositeIndices = [(sub_ss), (sub_sd)] in { |
| def XMM0: Register<"xmm0">, DwarfRegNum<[17, 21, 21]>; |
| def XMM1: Register<"xmm1">, DwarfRegNum<[18, 22, 22]>; |
| def XMM2: Register<"xmm2">, DwarfRegNum<[19, 23, 23]>; |
| def XMM3: Register<"xmm3">, DwarfRegNum<[20, 24, 24]>; |
| def XMM4: Register<"xmm4">, DwarfRegNum<[21, 25, 25]>; |
| def XMM5: Register<"xmm5">, DwarfRegNum<[22, 26, 26]>; |
| def XMM6: Register<"xmm6">, DwarfRegNum<[23, 27, 27]>; |
| def XMM7: Register<"xmm7">, DwarfRegNum<[24, 28, 28]>; |
| |
| // X86-64 only |
| def XMM8: Register<"xmm8">, DwarfRegNum<[25, -2, -2]>; |
| def XMM9: Register<"xmm9">, DwarfRegNum<[26, -2, -2]>; |
| def XMM10: Register<"xmm10">, DwarfRegNum<[27, -2, -2]>; |
| def XMM11: Register<"xmm11">, DwarfRegNum<[28, -2, -2]>; |
| def XMM12: Register<"xmm12">, DwarfRegNum<[29, -2, -2]>; |
| def XMM13: Register<"xmm13">, DwarfRegNum<[30, -2, -2]>; |
| def XMM14: Register<"xmm14">, DwarfRegNum<[31, -2, -2]>; |
| def XMM15: Register<"xmm15">, DwarfRegNum<[32, -2, -2]>; |
| } |
| |
| // YMM Registers, used by AVX instructions |
| let SubRegIndices = [sub_xmm] in { |
| def YMM0: RegisterWithSubRegs<"ymm0", [XMM0]>, DwarfRegNum<[17, 21, 21]>; |
| def YMM1: RegisterWithSubRegs<"ymm1", [XMM1]>, DwarfRegNum<[18, 22, 22]>; |
| def YMM2: RegisterWithSubRegs<"ymm2", [XMM2]>, DwarfRegNum<[19, 23, 23]>; |
| def YMM3: RegisterWithSubRegs<"ymm3", [XMM3]>, DwarfRegNum<[20, 24, 24]>; |
| def YMM4: RegisterWithSubRegs<"ymm4", [XMM4]>, DwarfRegNum<[21, 25, 25]>; |
| def YMM5: RegisterWithSubRegs<"ymm5", [XMM5]>, DwarfRegNum<[22, 26, 26]>; |
| def YMM6: RegisterWithSubRegs<"ymm6", [XMM6]>, DwarfRegNum<[23, 27, 27]>; |
| def YMM7: RegisterWithSubRegs<"ymm7", [XMM7]>, DwarfRegNum<[24, 28, 28]>; |
| def YMM8: RegisterWithSubRegs<"ymm8", [XMM8]>, DwarfRegNum<[25, -2, -2]>; |
| def YMM9: RegisterWithSubRegs<"ymm9", [XMM9]>, DwarfRegNum<[26, -2, -2]>; |
| def YMM10: RegisterWithSubRegs<"ymm10", [XMM10]>, DwarfRegNum<[27, -2, -2]>; |
| def YMM11: RegisterWithSubRegs<"ymm11", [XMM11]>, DwarfRegNum<[28, -2, -2]>; |
| def YMM12: RegisterWithSubRegs<"ymm12", [XMM12]>, DwarfRegNum<[29, -2, -2]>; |
| def YMM13: RegisterWithSubRegs<"ymm13", [XMM13]>, DwarfRegNum<[30, -2, -2]>; |
| def YMM14: RegisterWithSubRegs<"ymm14", [XMM14]>, DwarfRegNum<[31, -2, -2]>; |
| def YMM15: RegisterWithSubRegs<"ymm15", [XMM15]>, DwarfRegNum<[32, -2, -2]>; |
| } |
| |
| // Floating point stack registers |
| def ST0 : Register<"st(0)">, DwarfRegNum<[33, 12, 11]>; |
| def ST1 : Register<"st(1)">, DwarfRegNum<[34, 13, 12]>; |
| def ST2 : Register<"st(2)">, DwarfRegNum<[35, 14, 13]>; |
| def ST3 : Register<"st(3)">, DwarfRegNum<[36, 15, 14]>; |
| def ST4 : Register<"st(4)">, DwarfRegNum<[37, 16, 15]>; |
| def ST5 : Register<"st(5)">, DwarfRegNum<[38, 17, 16]>; |
| def ST6 : Register<"st(6)">, DwarfRegNum<[39, 18, 17]>; |
| def ST7 : Register<"st(7)">, DwarfRegNum<[40, 19, 18]>; |
| |
| // Status flags register |
| def EFLAGS : Register<"flags">; |
| |
| // Segment registers |
| def CS : Register<"cs">; |
| def DS : Register<"ds">; |
| def SS : Register<"ss">; |
| def ES : Register<"es">; |
| def FS : Register<"fs">; |
| def GS : Register<"gs">; |
| |
| // Debug registers |
| def DR0 : Register<"dr0">; |
| def DR1 : Register<"dr1">; |
| def DR2 : Register<"dr2">; |
| def DR3 : Register<"dr3">; |
| def DR4 : Register<"dr4">; |
| def DR5 : Register<"dr5">; |
| def DR6 : Register<"dr6">; |
| def DR7 : Register<"dr7">; |
| |
| // Control registers |
| def CR0 : Register<"cr0">; |
| def CR1 : Register<"cr1">; |
| def CR2 : Register<"cr2">; |
| def CR3 : Register<"cr3">; |
| def CR4 : Register<"cr4">; |
| def CR5 : Register<"cr5">; |
| def CR6 : Register<"cr6">; |
| def CR7 : Register<"cr7">; |
| def CR8 : Register<"cr8">; |
| def CR9 : Register<"cr9">; |
| def CR10 : Register<"cr10">; |
| def CR11 : Register<"cr11">; |
| def CR12 : Register<"cr12">; |
| def CR13 : Register<"cr13">; |
| def CR14 : Register<"cr14">; |
| def CR15 : Register<"cr15">; |
| |
| // Pseudo index registers |
| def EIZ : Register<"eiz">; |
| def RIZ : Register<"riz">; |
| } |
| |
| |
| //===----------------------------------------------------------------------===// |
| // Register Class Definitions... now that we have all of the pieces, define the |
| // top-level register classes. The order specified in the register list is |
| // implicitly defined to be the register allocation order. |
| // |
| |
| // List call-clobbered registers before callee-save registers. RBX, RBP, (and |
| // R12, R13, R14, and R15 for X86-64) are callee-save registers. |
| // In 64-mode, there are 12 additional i8 registers, SIL, DIL, BPL, SPL, and |
| // R8B, ... R15B. |
| // Allocate R12 and R13 last, as these require an extra byte when |
| // encoded in x86_64 instructions. |
| // FIXME: Allow AH, CH, DH, BH to be used as general-purpose registers in |
| // 64-bit mode. The main complication is that they cannot be encoded in an |
| // instruction requiring a REX prefix, while SIL, DIL, BPL, R8D, etc. |
| // require a REX prefix. For example, "addb %ah, %dil" and "movzbl %ah, %r8d" |
| // cannot be encoded. |
| def GR8 : RegisterClass<"X86", [i8], 8, |
| [AL, CL, DL, AH, CH, DH, BL, BH, SIL, DIL, BPL, SPL, |
| R8B, R9B, R10B, R11B, R14B, R15B, R12B, R13B]> { |
| let MethodProtos = [{ |
| iterator allocation_order_begin(const MachineFunction &MF) const; |
| iterator allocation_order_end(const MachineFunction &MF) const; |
| }]; |
| let MethodBodies = [{ |
| static const unsigned X86_GR8_AO_64[] = { |
| X86::AL, X86::CL, X86::DL, X86::SIL, X86::DIL, |
| X86::R8B, X86::R9B, X86::R10B, X86::R11B, |
| X86::BL, X86::R14B, X86::R15B, X86::R12B, X86::R13B, X86::BPL |
| }; |
| |
| GR8Class::iterator |
| GR8Class::allocation_order_begin(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const X86Subtarget &Subtarget = TM.getSubtarget<X86Subtarget>(); |
| if (Subtarget.is64Bit()) |
| return X86_GR8_AO_64; |
| else |
| return begin(); |
| } |
| |
| GR8Class::iterator |
| GR8Class::allocation_order_end(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const TargetFrameLowering *TFI = TM.getFrameLowering(); |
| const X86Subtarget &Subtarget = TM.getSubtarget<X86Subtarget>(); |
| const X86MachineFunctionInfo *MFI = MF.getInfo<X86MachineFunctionInfo>(); |
| // Does the function dedicate RBP / EBP to being a frame ptr? |
| if (!Subtarget.is64Bit()) |
| // In 32-mode, none of the 8-bit registers aliases EBP or ESP. |
| return begin() + 8; |
| else if (TFI->hasFP(MF) || MFI->getReserveFP()) |
| // If so, don't allocate SPL or BPL. |
| return array_endof(X86_GR8_AO_64) - 1; |
| else |
| // If not, just don't allocate SPL. |
| return array_endof(X86_GR8_AO_64); |
| } |
| }]; |
| } |
| |
| def GR16 : RegisterClass<"X86", [i16], 16, |
| [AX, CX, DX, SI, DI, BX, BP, SP, |
| R8W, R9W, R10W, R11W, R14W, R15W, R12W, R13W]> { |
| let SubRegClasses = [(GR8 sub_8bit, sub_8bit_hi)]; |
| let MethodProtos = [{ |
| iterator allocation_order_begin(const MachineFunction &MF) const; |
| iterator allocation_order_end(const MachineFunction &MF) const; |
| }]; |
| let MethodBodies = [{ |
| static const unsigned X86_GR16_AO_64[] = { |
| X86::AX, X86::CX, X86::DX, X86::SI, X86::DI, |
| X86::R8W, X86::R9W, X86::R10W, X86::R11W, |
| X86::BX, X86::R14W, X86::R15W, X86::R12W, X86::R13W, X86::BP |
| }; |
| |
| GR16Class::iterator |
| GR16Class::allocation_order_begin(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const X86Subtarget &Subtarget = TM.getSubtarget<X86Subtarget>(); |
| if (Subtarget.is64Bit()) |
| return X86_GR16_AO_64; |
| else |
| return begin(); |
| } |
| |
| GR16Class::iterator |
| GR16Class::allocation_order_end(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const TargetFrameLowering *TFI = TM.getFrameLowering(); |
| const X86Subtarget &Subtarget = TM.getSubtarget<X86Subtarget>(); |
| const X86MachineFunctionInfo *MFI = MF.getInfo<X86MachineFunctionInfo>(); |
| if (Subtarget.is64Bit()) { |
| // Does the function dedicate RBP to being a frame ptr? |
| if (TFI->hasFP(MF) || MFI->getReserveFP()) |
| // If so, don't allocate SP or BP. |
| return array_endof(X86_GR16_AO_64) - 1; |
| else |
| // If not, just don't allocate SP. |
| return array_endof(X86_GR16_AO_64); |
| } else { |
| // Does the function dedicate EBP to being a frame ptr? |
| if (TFI->hasFP(MF) || MFI->getReserveFP()) |
| // If so, don't allocate SP or BP. |
| return begin() + 6; |
| else |
| // If not, just don't allocate SP. |
| return begin() + 7; |
| } |
| } |
| }]; |
| } |
| |
| def GR32 : RegisterClass<"X86", [i32], 32, |
| [EAX, ECX, EDX, ESI, EDI, EBX, EBP, ESP, |
| R8D, R9D, R10D, R11D, R14D, R15D, R12D, R13D]> { |
| let SubRegClasses = [(GR8 sub_8bit, sub_8bit_hi), (GR16 sub_16bit)]; |
| let MethodProtos = [{ |
| iterator allocation_order_begin(const MachineFunction &MF) const; |
| iterator allocation_order_end(const MachineFunction &MF) const; |
| }]; |
| let MethodBodies = [{ |
| static const unsigned X86_GR32_AO_64[] = { |
| X86::EAX, X86::ECX, X86::EDX, X86::ESI, X86::EDI, |
| X86::R8D, X86::R9D, X86::R10D, X86::R11D, |
| X86::EBX, X86::R14D, X86::R15D, X86::R12D, X86::R13D, X86::EBP |
| }; |
| |
| GR32Class::iterator |
| GR32Class::allocation_order_begin(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const X86Subtarget &Subtarget = TM.getSubtarget<X86Subtarget>(); |
| if (Subtarget.is64Bit()) |
| return X86_GR32_AO_64; |
| else |
| return begin(); |
| } |
| |
| GR32Class::iterator |
| GR32Class::allocation_order_end(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const TargetFrameLowering *TFI = TM.getFrameLowering(); |
| const X86Subtarget &Subtarget = TM.getSubtarget<X86Subtarget>(); |
| const X86MachineFunctionInfo *MFI = MF.getInfo<X86MachineFunctionInfo>(); |
| if (Subtarget.is64Bit()) { |
| // Does the function dedicate RBP to being a frame ptr? |
| if (TFI->hasFP(MF) || MFI->getReserveFP()) |
| // If so, don't allocate ESP or EBP. |
| return array_endof(X86_GR32_AO_64) - 1; |
| else |
| // If not, just don't allocate ESP. |
| return array_endof(X86_GR32_AO_64); |
| } else { |
| // Does the function dedicate EBP to being a frame ptr? |
| if (TFI->hasFP(MF) || MFI->getReserveFP()) |
| // If so, don't allocate ESP or EBP. |
| return begin() + 6; |
| else |
| // If not, just don't allocate ESP. |
| return begin() + 7; |
| } |
| } |
| }]; |
| } |
| |
| // GR64 - 64-bit GPRs. This oddly includes RIP, which isn't accurate, since |
| // RIP isn't really a register and it can't be used anywhere except in an |
| // address, but it doesn't cause trouble. |
| def GR64 : RegisterClass<"X86", [i64], 64, |
| [RAX, RCX, RDX, RSI, RDI, R8, R9, R10, R11, |
| RBX, R14, R15, R12, R13, RBP, RSP, RIP]> { |
| let SubRegClasses = [(GR8 sub_8bit, sub_8bit_hi), |
| (GR16 sub_16bit), |
| (GR32 sub_32bit)]; |
| let MethodProtos = [{ |
| iterator allocation_order_end(const MachineFunction &MF) const; |
| }]; |
| let MethodBodies = [{ |
| GR64Class::iterator |
| GR64Class::allocation_order_end(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const TargetFrameLowering *TFI = TM.getFrameLowering(); |
| const X86Subtarget &Subtarget = TM.getSubtarget<X86Subtarget>(); |
| const X86MachineFunctionInfo *MFI = MF.getInfo<X86MachineFunctionInfo>(); |
| if (!Subtarget.is64Bit()) |
| return begin(); // None of these are allocatable in 32-bit. |
| // Does the function dedicate RBP to being a frame ptr? |
| if (TFI->hasFP(MF) || MFI->getReserveFP()) |
| return end()-3; // If so, don't allocate RIP, RSP or RBP |
| else |
| return end()-2; // If not, just don't allocate RIP or RSP |
| } |
| }]; |
| } |
| |
| // Segment registers for use by MOV instructions (and others) that have a |
| // segment register as one operand. Always contain a 16-bit segment |
| // descriptor. |
| def SEGMENT_REG : RegisterClass<"X86", [i16], 16, [CS, DS, SS, ES, FS, GS]>; |
| |
| // Debug registers. |
| def DEBUG_REG : RegisterClass<"X86", [i32], 32, |
| [DR0, DR1, DR2, DR3, DR4, DR5, DR6, DR7]>; |
| |
| // Control registers. |
| def CONTROL_REG : RegisterClass<"X86", [i64], 64, |
| [CR0, CR1, CR2, CR3, CR4, CR5, CR6, CR7, CR8, |
| CR9, CR10, CR11, CR12, CR13, CR14, CR15]>; |
| |
| // GR8_ABCD_L, GR8_ABCD_H, GR16_ABCD, GR32_ABCD, GR64_ABCD - Subclasses of |
| // GR8, GR16, GR32, and GR64 which contain just the "a" "b", "c", and "d" |
| // registers. On x86-32, GR16_ABCD and GR32_ABCD are classes for registers |
| // that support 8-bit subreg operations. On x86-64, GR16_ABCD, GR32_ABCD, |
| // and GR64_ABCD are classes for registers that support 8-bit h-register |
| // operations. |
| def GR8_ABCD_L : RegisterClass<"X86", [i8], 8, [AL, CL, DL, BL]>; |
| def GR8_ABCD_H : RegisterClass<"X86", [i8], 8, [AH, CH, DH, BH]>; |
| def GR16_ABCD : RegisterClass<"X86", [i16], 16, [AX, CX, DX, BX]> { |
| let SubRegClasses = [(GR8_ABCD_L sub_8bit), (GR8_ABCD_H sub_8bit_hi)]; |
| } |
| def GR32_ABCD : RegisterClass<"X86", [i32], 32, [EAX, ECX, EDX, EBX]> { |
| let SubRegClasses = [(GR8_ABCD_L sub_8bit), |
| (GR8_ABCD_H sub_8bit_hi), |
| (GR16_ABCD sub_16bit)]; |
| } |
| def GR64_ABCD : RegisterClass<"X86", [i64], 64, [RAX, RCX, RDX, RBX]> { |
| let SubRegClasses = [(GR8_ABCD_L sub_8bit), |
| (GR8_ABCD_H sub_8bit_hi), |
| (GR16_ABCD sub_16bit), |
| (GR32_ABCD sub_32bit)]; |
| } |
| def GR32_TC : RegisterClass<"X86", [i32], 32, [EAX, ECX, EDX]> { |
| let SubRegClasses = [(GR8 sub_8bit, sub_8bit_hi), (GR16 sub_16bit)]; |
| } |
| def GR64_TC : RegisterClass<"X86", [i64], 64, [RAX, RCX, RDX, RSI, RDI, |
| R8, R9, R11]> { |
| let SubRegClasses = [(GR8 sub_8bit, sub_8bit_hi), |
| (GR16 sub_16bit), |
| (GR32_TC sub_32bit)]; |
| } |
| |
| def GR64_TCW64 : RegisterClass<"X86", [i64], 64, [RAX, RCX, RDX, |
| R8, R9, R11]>; |
| |
| // GR8_NOREX - GR8 registers which do not require a REX prefix. |
| def GR8_NOREX : RegisterClass<"X86", [i8], 8, |
| [AL, CL, DL, AH, CH, DH, BL, BH]> { |
| let MethodProtos = [{ |
| iterator allocation_order_begin(const MachineFunction &MF) const; |
| iterator allocation_order_end(const MachineFunction &MF) const; |
| }]; |
| let MethodBodies = [{ |
| // In 64-bit mode, it's not safe to blindly allocate H registers. |
| static const unsigned X86_GR8_NOREX_AO_64[] = { |
| X86::AL, X86::CL, X86::DL, X86::BL |
| }; |
| |
| GR8_NOREXClass::iterator |
| GR8_NOREXClass::allocation_order_begin(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const X86Subtarget &Subtarget = TM.getSubtarget<X86Subtarget>(); |
| if (Subtarget.is64Bit()) |
| return X86_GR8_NOREX_AO_64; |
| else |
| return begin(); |
| } |
| |
| GR8_NOREXClass::iterator |
| GR8_NOREXClass::allocation_order_end(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const X86Subtarget &Subtarget = TM.getSubtarget<X86Subtarget>(); |
| if (Subtarget.is64Bit()) |
| return array_endof(X86_GR8_NOREX_AO_64); |
| else |
| return end(); |
| } |
| }]; |
| } |
| // GR16_NOREX - GR16 registers which do not require a REX prefix. |
| def GR16_NOREX : RegisterClass<"X86", [i16], 16, |
| [AX, CX, DX, SI, DI, BX, BP, SP]> { |
| let SubRegClasses = [(GR8_NOREX sub_8bit, sub_8bit_hi)]; |
| let MethodProtos = [{ |
| iterator allocation_order_end(const MachineFunction &MF) const; |
| }]; |
| let MethodBodies = [{ |
| GR16_NOREXClass::iterator |
| GR16_NOREXClass::allocation_order_end(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const TargetFrameLowering *TFI = TM.getFrameLowering(); |
| const X86MachineFunctionInfo *MFI = MF.getInfo<X86MachineFunctionInfo>(); |
| // Does the function dedicate RBP / EBP to being a frame ptr? |
| if (TFI->hasFP(MF) || MFI->getReserveFP()) |
| // If so, don't allocate SP or BP. |
| return end() - 2; |
| else |
| // If not, just don't allocate SP. |
| return end() - 1; |
| } |
| }]; |
| } |
| // GR32_NOREX - GR32 registers which do not require a REX prefix. |
| def GR32_NOREX : RegisterClass<"X86", [i32], 32, |
| [EAX, ECX, EDX, ESI, EDI, EBX, EBP, ESP]> { |
| let SubRegClasses = [(GR8_NOREX sub_8bit, sub_8bit_hi), |
| (GR16_NOREX sub_16bit)]; |
| let MethodProtos = [{ |
| iterator allocation_order_end(const MachineFunction &MF) const; |
| }]; |
| let MethodBodies = [{ |
| GR32_NOREXClass::iterator |
| GR32_NOREXClass::allocation_order_end(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const TargetFrameLowering *TFI = TM.getFrameLowering(); |
| const X86MachineFunctionInfo *MFI = MF.getInfo<X86MachineFunctionInfo>(); |
| // Does the function dedicate RBP / EBP to being a frame ptr? |
| if (TFI->hasFP(MF) || MFI->getReserveFP()) |
| // If so, don't allocate ESP or EBP. |
| return end() - 2; |
| else |
| // If not, just don't allocate ESP. |
| return end() - 1; |
| } |
| }]; |
| } |
| // GR64_NOREX - GR64 registers which do not require a REX prefix. |
| def GR64_NOREX : RegisterClass<"X86", [i64], 64, |
| [RAX, RCX, RDX, RSI, RDI, RBX, RBP, RSP, RIP]> { |
| let SubRegClasses = [(GR8_NOREX sub_8bit, sub_8bit_hi), |
| (GR16_NOREX sub_16bit), |
| (GR32_NOREX sub_32bit)]; |
| let MethodProtos = [{ |
| iterator allocation_order_end(const MachineFunction &MF) const; |
| }]; |
| let MethodBodies = [{ |
| GR64_NOREXClass::iterator |
| GR64_NOREXClass::allocation_order_end(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const TargetFrameLowering *TFI = TM.getFrameLowering(); |
| const X86MachineFunctionInfo *MFI = MF.getInfo<X86MachineFunctionInfo>(); |
| // Does the function dedicate RBP to being a frame ptr? |
| if (TFI->hasFP(MF) || MFI->getReserveFP()) |
| // If so, don't allocate RIP, RSP or RBP. |
| return end() - 3; |
| else |
| // If not, just don't allocate RIP or RSP. |
| return end() - 2; |
| } |
| }]; |
| } |
| |
| // GR32_NOSP - GR32 registers except ESP. |
| def GR32_NOSP : RegisterClass<"X86", [i32], 32, |
| [EAX, ECX, EDX, ESI, EDI, EBX, EBP, |
| R8D, R9D, R10D, R11D, R14D, R15D, R12D, R13D]> { |
| let SubRegClasses = [(GR8 sub_8bit, sub_8bit_hi), (GR16 sub_16bit)]; |
| let MethodProtos = [{ |
| iterator allocation_order_begin(const MachineFunction &MF) const; |
| iterator allocation_order_end(const MachineFunction &MF) const; |
| }]; |
| let MethodBodies = [{ |
| static const unsigned X86_GR32_NOSP_AO_64[] = { |
| X86::EAX, X86::ECX, X86::EDX, X86::ESI, X86::EDI, |
| X86::R8D, X86::R9D, X86::R10D, X86::R11D, |
| X86::EBX, X86::R14D, X86::R15D, X86::R12D, X86::R13D, X86::EBP |
| }; |
| |
| GR32_NOSPClass::iterator |
| GR32_NOSPClass::allocation_order_begin(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const X86Subtarget &Subtarget = TM.getSubtarget<X86Subtarget>(); |
| if (Subtarget.is64Bit()) |
| return X86_GR32_NOSP_AO_64; |
| else |
| return begin(); |
| } |
| |
| GR32_NOSPClass::iterator |
| GR32_NOSPClass::allocation_order_end(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const TargetFrameLowering *TFI = TM.getFrameLowering(); |
| const X86Subtarget &Subtarget = TM.getSubtarget<X86Subtarget>(); |
| const X86MachineFunctionInfo *MFI = MF.getInfo<X86MachineFunctionInfo>(); |
| if (Subtarget.is64Bit()) { |
| // Does the function dedicate RBP to being a frame ptr? |
| if (TFI->hasFP(MF) || MFI->getReserveFP()) |
| // If so, don't allocate EBP. |
| return array_endof(X86_GR32_NOSP_AO_64) - 1; |
| else |
| // If not, any reg in this class is ok. |
| return array_endof(X86_GR32_NOSP_AO_64); |
| } else { |
| // Does the function dedicate EBP to being a frame ptr? |
| if (TFI->hasFP(MF) || MFI->getReserveFP()) |
| // If so, don't allocate EBP. |
| return begin() + 6; |
| else |
| // If not, any reg in this class is ok. |
| return begin() + 7; |
| } |
| } |
| }]; |
| } |
| |
| // GR64_NOSP - GR64 registers except RSP (and RIP). |
| def GR64_NOSP : RegisterClass<"X86", [i64], 64, |
| [RAX, RCX, RDX, RSI, RDI, R8, R9, R10, R11, |
| RBX, R14, R15, R12, R13, RBP]> { |
| let SubRegClasses = [(GR8 sub_8bit, sub_8bit_hi), |
| (GR16 sub_16bit), |
| (GR32_NOSP sub_32bit)]; |
| let MethodProtos = [{ |
| iterator allocation_order_end(const MachineFunction &MF) const; |
| }]; |
| let MethodBodies = [{ |
| GR64_NOSPClass::iterator |
| GR64_NOSPClass::allocation_order_end(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const TargetFrameLowering *TFI = TM.getFrameLowering(); |
| const X86Subtarget &Subtarget = TM.getSubtarget<X86Subtarget>(); |
| const X86MachineFunctionInfo *MFI = MF.getInfo<X86MachineFunctionInfo>(); |
| if (!Subtarget.is64Bit()) |
| return begin(); // None of these are allocatable in 32-bit. |
| // Does the function dedicate RBP to being a frame ptr? |
| if (TFI->hasFP(MF) || MFI->getReserveFP()) |
| return end()-1; // If so, don't allocate RBP |
| else |
| return end(); // If not, any reg in this class is ok. |
| } |
| }]; |
| } |
| |
| // GR64_NOREX_NOSP - GR64_NOREX registers except RSP. |
| def GR64_NOREX_NOSP : RegisterClass<"X86", [i64], 64, |
| [RAX, RCX, RDX, RSI, RDI, RBX, RBP]> { |
| let SubRegClasses = [(GR8_NOREX sub_8bit, sub_8bit_hi), |
| (GR16_NOREX sub_16bit), |
| (GR32_NOREX sub_32bit)]; |
| let MethodProtos = [{ |
| iterator allocation_order_end(const MachineFunction &MF) const; |
| }]; |
| let MethodBodies = [{ |
| GR64_NOREX_NOSPClass::iterator |
| GR64_NOREX_NOSPClass::allocation_order_end(const MachineFunction &MF) const |
| { |
| const TargetMachine &TM = MF.getTarget(); |
| const TargetFrameLowering *TFI = TM.getFrameLowering(); |
| const X86MachineFunctionInfo *MFI = MF.getInfo<X86MachineFunctionInfo>(); |
| // Does the function dedicate RBP to being a frame ptr? |
| if (TFI->hasFP(MF) || MFI->getReserveFP()) |
| // If so, don't allocate RBP. |
| return end() - 1; |
| else |
| // If not, any reg in this class is ok. |
| return end(); |
| } |
| }]; |
| } |
| |
| // A class to support the 'A' assembler constraint: EAX then EDX. |
| def GR32_AD : RegisterClass<"X86", [i32], 32, [EAX, EDX]> { |
| let SubRegClasses = [(GR8_ABCD_L sub_8bit), |
| (GR8_ABCD_H sub_8bit_hi), |
| (GR16_ABCD sub_16bit)]; |
| } |
| |
| // Scalar SSE2 floating point registers. |
| def FR32 : RegisterClass<"X86", [f32], 32, |
| [XMM0, XMM1, XMM2, XMM3, XMM4, XMM5, XMM6, XMM7, |
| XMM8, XMM9, XMM10, XMM11, |
| XMM12, XMM13, XMM14, XMM15]> { |
| let MethodProtos = [{ |
| iterator allocation_order_end(const MachineFunction &MF) const; |
| }]; |
| let MethodBodies = [{ |
| FR32Class::iterator |
| FR32Class::allocation_order_end(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const X86Subtarget &Subtarget = TM.getSubtarget<X86Subtarget>(); |
| if (!Subtarget.is64Bit()) |
| return end()-8; // Only XMM0 to XMM7 are available in 32-bit mode. |
| else |
| return end(); |
| } |
| }]; |
| } |
| |
| def FR64 : RegisterClass<"X86", [f64], 64, |
| [XMM0, XMM1, XMM2, XMM3, XMM4, XMM5, XMM6, XMM7, |
| XMM8, XMM9, XMM10, XMM11, |
| XMM12, XMM13, XMM14, XMM15]> { |
| let MethodProtos = [{ |
| iterator allocation_order_end(const MachineFunction &MF) const; |
| }]; |
| let MethodBodies = [{ |
| FR64Class::iterator |
| FR64Class::allocation_order_end(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const X86Subtarget &Subtarget = TM.getSubtarget<X86Subtarget>(); |
| if (!Subtarget.is64Bit()) |
| return end()-8; // Only XMM0 to XMM7 are available in 32-bit mode. |
| else |
| return end(); |
| } |
| }]; |
| } |
| |
| |
| // FIXME: This sets up the floating point register files as though they are f64 |
| // values, though they really are f80 values. This will cause us to spill |
| // values as 64-bit quantities instead of 80-bit quantities, which is much much |
| // faster on common hardware. In reality, this should be controlled by a |
| // command line option or something. |
| |
| def RFP32 : RegisterClass<"X86",[f32], 32, [FP0, FP1, FP2, FP3, FP4, FP5, FP6]>; |
| def RFP64 : RegisterClass<"X86",[f64], 32, [FP0, FP1, FP2, FP3, FP4, FP5, FP6]>; |
| def RFP80 : RegisterClass<"X86",[f80], 32, [FP0, FP1, FP2, FP3, FP4, FP5, FP6]>; |
| |
| // Floating point stack registers (these are not allocatable by the |
| // register allocator - the floating point stackifier is responsible |
| // for transforming FPn allocations to STn registers) |
| def RST : RegisterClass<"X86", [f80, f64, f32], 32, |
| [ST0, ST1, ST2, ST3, ST4, ST5, ST6, ST7]> { |
| let MethodProtos = [{ |
| iterator allocation_order_end(const MachineFunction &MF) const; |
| }]; |
| let MethodBodies = [{ |
| RSTClass::iterator |
| RSTClass::allocation_order_end(const MachineFunction &MF) const { |
| return begin(); |
| } |
| }]; |
| } |
| |
| // Generic vector registers: VR64 and VR128. |
| def VR64: RegisterClass<"X86", [x86mmx], 64, |
| [MM0, MM1, MM2, MM3, MM4, MM5, MM6, MM7]>; |
| def VR128 : RegisterClass<"X86", [v16i8, v8i16, v4i32, v2i64, v4f32, v2f64],128, |
| [XMM0, XMM1, XMM2, XMM3, XMM4, XMM5, XMM6, XMM7, |
| XMM8, XMM9, XMM10, XMM11, |
| XMM12, XMM13, XMM14, XMM15]> { |
| let SubRegClasses = [(FR32 sub_ss), (FR64 sub_sd)]; |
| |
| let MethodProtos = [{ |
| iterator allocation_order_end(const MachineFunction &MF) const; |
| }]; |
| let MethodBodies = [{ |
| VR128Class::iterator |
| VR128Class::allocation_order_end(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const X86Subtarget &Subtarget = TM.getSubtarget<X86Subtarget>(); |
| if (!Subtarget.is64Bit()) |
| return end()-8; // Only XMM0 to XMM7 are available in 32-bit mode. |
| else |
| return end(); |
| } |
| }]; |
| } |
| |
| def VR256 : RegisterClass<"X86", [v32i8, v8i32, v4i64, v8f32, v4f64], 256, |
| [YMM0, YMM1, YMM2, YMM3, YMM4, YMM5, YMM6, YMM7, |
| YMM8, YMM9, YMM10, YMM11, |
| YMM12, YMM13, YMM14, YMM15]> { |
| let SubRegClasses = [(FR32 sub_ss), (FR64 sub_sd), (VR128 sub_xmm)]; |
| |
| let MethodProtos = [{ |
| iterator allocation_order_end(const MachineFunction &MF) const; |
| }]; |
| let MethodBodies = [{ |
| VR256Class::iterator |
| VR256Class::allocation_order_end(const MachineFunction &MF) const { |
| const TargetMachine &TM = MF.getTarget(); |
| const X86Subtarget &Subtarget = TM.getSubtarget<X86Subtarget>(); |
| if (!Subtarget.is64Bit()) |
| return end()-8; // Only YMM0 to YMM7 are available in 32-bit mode. |
| else |
| return end(); |
| } |
| }]; |
| } |
| |
| // Status flags registers. |
| def CCR : RegisterClass<"X86", [i32], 32, [EFLAGS]> { |
| let CopyCost = -1; // Don't allow copying of status registers. |
| |
| // EFLAGS is not allocatable. |
| let MethodProtos = [{ |
| iterator allocation_order_end(const MachineFunction &MF) const; |
| }]; |
| let MethodBodies = [{ |
| CCRClass::iterator |
| CCRClass::allocation_order_end(const MachineFunction &MF) const { |
| return allocation_order_begin(MF); |
| } |
| }]; |
| } |
