| //===- X86InstructionInfo.h - X86 Instruction Information ---------*-C++-*-===// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file was developed by the LLVM research group and is distributed under |
| // the University of Illinois Open Source License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file contains the X86 implementation of the TargetInstrInfo class. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #ifndef X86INSTRUCTIONINFO_H |
| #define X86INSTRUCTIONINFO_H |
| |
| #include "llvm/Target/TargetInstrInfo.h" |
| #include "X86RegisterInfo.h" |
| |
| /// X86II - This namespace holds all of the target specific flags that |
| /// instruction info tracks. |
| /// |
| namespace X86II { |
| enum { |
| //===------------------------------------------------------------------===// |
| // Instruction types. These are the standard/most common forms for X86 |
| // instructions. |
| // |
| |
| // PseudoFrm - This represents an instruction that is a pseudo instruction |
| // or one that has not been implemented yet. It is illegal to code generate |
| // it, but tolerated for intermediate implementation stages. |
| Pseudo = 0, |
| |
| /// Raw - This form is for instructions that don't have any operands, so |
| /// they are just a fixed opcode value, like 'leave'. |
| RawFrm = 1, |
| |
| /// AddRegFrm - This form is used for instructions like 'push r32' that have |
| /// their one register operand added to their opcode. |
| AddRegFrm = 2, |
| |
| /// MRMDestReg - This form is used for instructions that use the Mod/RM byte |
| /// to specify a destination, which in this case is a register. |
| /// |
| MRMDestReg = 3, |
| |
| /// MRMDestMem - This form is used for instructions that use the Mod/RM byte |
| /// to specify a destination, which in this case is memory. |
| /// |
| MRMDestMem = 4, |
| |
| /// MRMSrcReg - This form is used for instructions that use the Mod/RM byte |
| /// to specify a source, which in this case is a register. |
| /// |
| MRMSrcReg = 5, |
| |
| /// MRMSrcMem - This form is used for instructions that use the Mod/RM byte |
| /// to specify a source, which in this case is memory. |
| /// |
| MRMSrcMem = 6, |
| |
| /// MRMS[0-7][rm] - These forms are used to represent instructions that use |
| /// a Mod/RM byte, and use the middle field to hold extended opcode |
| /// information. In the intel manual these are represented as /0, /1, ... |
| /// |
| |
| // First, instructions that operate on a register r/m operand... |
| MRMS0r = 16, MRMS1r = 17, MRMS2r = 18, MRMS3r = 19, // Format /0 /1 /2 /3 |
| MRMS4r = 20, MRMS5r = 21, MRMS6r = 22, MRMS7r = 23, // Format /4 /5 /6 /7 |
| |
| // Next, instructions that operate on a memory r/m operand... |
| MRMS0m = 24, MRMS1m = 25, MRMS2m = 26, MRMS3m = 27, // Format /0 /1 /2 /3 |
| MRMS4m = 28, MRMS5m = 29, MRMS6m = 30, MRMS7m = 31, // Format /4 /5 /6 /7 |
| |
| FormMask = 31, |
| |
| //===------------------------------------------------------------------===// |
| // Actual flags... |
| |
| // OpSize - Set if this instruction requires an operand size prefix (0x66), |
| // which most often indicates that the instruction operates on 16 bit data |
| // instead of 32 bit data. |
| OpSize = 1 << 5, |
| |
| // Op0Mask - There are several prefix bytes that are used to form two byte |
| // opcodes. These are currently 0x0F, and 0xD8-0xDF. This mask is used to |
| // obtain the setting of this field. If no bits in this field is set, there |
| // is no prefix byte for obtaining a multibyte opcode. |
| // |
| Op0Shift = 6, |
| Op0Mask = 0xF << Op0Shift, |
| |
| // TB - TwoByte - Set if this instruction has a two byte opcode, which |
| // starts with a 0x0F byte before the real opcode. |
| TB = 1 << Op0Shift, |
| |
| // D8-DF - These escape opcodes are used by the floating point unit. These |
| // values must remain sequential. |
| D8 = 2 << Op0Shift, D9 = 3 << Op0Shift, |
| DA = 4 << Op0Shift, DB = 5 << Op0Shift, |
| DC = 6 << Op0Shift, DD = 7 << Op0Shift, |
| DE = 8 << Op0Shift, DF = 9 << Op0Shift, |
| |
| //===------------------------------------------------------------------===// |
| // This three-bit field describes the size of a memory operand. Zero is |
| // unused so that we can tell if we forgot to set a value. |
| ArgShift = 10, |
| ArgMask = 7 << ArgShift, |
| Arg8 = 1 << ArgShift, |
| Arg16 = 2 << ArgShift, |
| Arg32 = 3 << ArgShift, |
| Arg64 = 4 << ArgShift, // 64 bit int argument for FILD64 |
| ArgF32 = 5 << ArgShift, |
| ArgF64 = 6 << ArgShift, |
| ArgF80 = 7 << ArgShift, |
| |
| //===------------------------------------------------------------------===// |
| // FP Instruction Classification... Zero is non-fp instruction. |
| |
| // FPTypeMask - Mask for all of the FP types... |
| FPTypeShift = 13, |
| FPTypeMask = 7 << FPTypeShift, |
| |
| // ZeroArgFP - 0 arg FP instruction which implicitly pushes ST(0), f.e. fld0 |
| ZeroArgFP = 1 << FPTypeShift, |
| |
| // OneArgFP - 1 arg FP instructions which implicitly read ST(0), such as fst |
| OneArgFP = 2 << FPTypeShift, |
| |
| // OneArgFPRW - 1 arg FP instruction which implicitly read ST(0) and write a |
| // result back to ST(0). For example, fcos, fsqrt, etc. |
| // |
| OneArgFPRW = 3 << FPTypeShift, |
| |
| // TwoArgFP - 2 arg FP instructions which implicitly read ST(0), and an |
| // explicit argument, storing the result to either ST(0) or the implicit |
| // argument. For example: fadd, fsub, fmul, etc... |
| TwoArgFP = 4 << FPTypeShift, |
| |
| // SpecialFP - Special instruction forms. Dispatch by opcode explicitly. |
| SpecialFP = 5 << FPTypeShift, |
| |
| // PrintImplUses - Print out implicit uses in the assembly output. |
| PrintImplUses = 1 << 16, |
| |
| OpcodeShift = 17, |
| OpcodeMask = 0xFF << OpcodeShift, |
| // Bits 25 -> 31 are unused |
| }; |
| } |
| |
| class X86InstrInfo : public TargetInstrInfo { |
| const X86RegisterInfo RI; |
| public: |
| X86InstrInfo(); |
| |
| /// getRegisterInfo - TargetInstrInfo is a superset of MRegister info. As |
| /// such, whenever a client has an instance of instruction info, it should |
| /// always be able to get register info as well (through this method). |
| /// |
| virtual const MRegisterInfo &getRegisterInfo() const { return RI; } |
| |
| /// createNOPinstr - returns the target's implementation of NOP, which is |
| /// usually a pseudo-instruction, implemented by a degenerate version of |
| /// another instruction, e.g. X86: `xchg ax, ax'; SparcV9: `sethi r0, r0, r0' |
| /// |
| MachineInstr* createNOPinstr() const; |
| |
| /// isNOPinstr - not having a special NOP opcode, we need to know if a given |
| /// instruction is interpreted as an `official' NOP instr, i.e., there may be |
| /// more than one way to `do nothing' but only one canonical way to slack off. |
| /// |
| bool isNOPinstr(const MachineInstr &MI) const; |
| |
| // getBaseOpcodeFor - This function returns the "base" X86 opcode for the |
| // specified opcode number. |
| // |
| unsigned char getBaseOpcodeFor(unsigned Opcode) const { |
| return get(Opcode).TSFlags >> X86II::OpcodeShift; |
| } |
| }; |
| |
| #endif |