| //===-- X86BaseInfo.h - Top level definitions for X86 -------- --*- C++ -*-===// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file is distributed under the University of Illinois Open Source |
| // License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file contains small standalone helper functions and enum definitions for |
| // the X86 target useful for the compiler back-end and the MC libraries. |
| // As such, it deliberately does not include references to LLVM core |
| // code gen types, passes, etc.. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #ifndef LLVM_LIB_TARGET_X86_MCTARGETDESC_X86BASEINFO_H |
| #define LLVM_LIB_TARGET_X86_MCTARGETDESC_X86BASEINFO_H |
| |
| #include "X86MCTargetDesc.h" |
| #include "llvm/MC/MCInstrDesc.h" |
| #include "llvm/Support/DataTypes.h" |
| #include "llvm/Support/ErrorHandling.h" |
| |
| namespace llvm { |
| |
| namespace X86 { |
| // Enums for memory operand decoding. Each memory operand is represented with |
| // a 5 operand sequence in the form: |
| // [BaseReg, ScaleAmt, IndexReg, Disp, Segment] |
| // These enums help decode this. |
| enum { |
| AddrBaseReg = 0, |
| AddrScaleAmt = 1, |
| AddrIndexReg = 2, |
| AddrDisp = 3, |
| |
| /// AddrSegmentReg - The operand # of the segment in the memory operand. |
| AddrSegmentReg = 4, |
| |
| /// AddrNumOperands - Total number of operands in a memory reference. |
| AddrNumOperands = 5 |
| }; |
| } // end namespace X86; |
| |
| /// X86II - This namespace holds all of the target specific flags that |
| /// instruction info tracks. |
| /// |
| namespace X86II { |
| /// Target Operand Flag enum. |
| enum TOF { |
| //===------------------------------------------------------------------===// |
| // X86 Specific MachineOperand flags. |
| |
| MO_NO_FLAG, |
| |
| /// MO_GOT_ABSOLUTE_ADDRESS - On a symbol operand, this represents a |
| /// relocation of: |
| /// SYMBOL_LABEL + [. - PICBASELABEL] |
| MO_GOT_ABSOLUTE_ADDRESS, |
| |
| /// MO_PIC_BASE_OFFSET - On a symbol operand this indicates that the |
| /// immediate should get the value of the symbol minus the PIC base label: |
| /// SYMBOL_LABEL - PICBASELABEL |
| MO_PIC_BASE_OFFSET, |
| |
| /// MO_GOT - On a symbol operand this indicates that the immediate is the |
| /// offset to the GOT entry for the symbol name from the base of the GOT. |
| /// |
| /// See the X86-64 ELF ABI supplement for more details. |
| /// SYMBOL_LABEL @GOT |
| MO_GOT, |
| |
| /// MO_GOTOFF - On a symbol operand this indicates that the immediate is |
| /// the offset to the location of the symbol name from the base of the GOT. |
| /// |
| /// See the X86-64 ELF ABI supplement for more details. |
| /// SYMBOL_LABEL @GOTOFF |
| MO_GOTOFF, |
| |
| /// MO_GOTPCREL - On a symbol operand this indicates that the immediate is |
| /// offset to the GOT entry for the symbol name from the current code |
| /// location. |
| /// |
| /// See the X86-64 ELF ABI supplement for more details. |
| /// SYMBOL_LABEL @GOTPCREL |
| MO_GOTPCREL, |
| |
| /// MO_PLT - On a symbol operand this indicates that the immediate is |
| /// offset to the PLT entry of symbol name from the current code location. |
| /// |
| /// See the X86-64 ELF ABI supplement for more details. |
| /// SYMBOL_LABEL @PLT |
| MO_PLT, |
| |
| /// MO_TLSGD - On a symbol operand this indicates that the immediate is |
| /// the offset of the GOT entry with the TLS index structure that contains |
| /// the module number and variable offset for the symbol. Used in the |
| /// general dynamic TLS access model. |
| /// |
| /// See 'ELF Handling for Thread-Local Storage' for more details. |
| /// SYMBOL_LABEL @TLSGD |
| MO_TLSGD, |
| |
| /// MO_TLSLD - On a symbol operand this indicates that the immediate is |
| /// the offset of the GOT entry with the TLS index for the module that |
| /// contains the symbol. When this index is passed to a call to |
| /// __tls_get_addr, the function will return the base address of the TLS |
| /// block for the symbol. Used in the x86-64 local dynamic TLS access model. |
| /// |
| /// See 'ELF Handling for Thread-Local Storage' for more details. |
| /// SYMBOL_LABEL @TLSLD |
| MO_TLSLD, |
| |
| /// MO_TLSLDM - On a symbol operand this indicates that the immediate is |
| /// the offset of the GOT entry with the TLS index for the module that |
| /// contains the symbol. When this index is passed to a call to |
| /// ___tls_get_addr, the function will return the base address of the TLS |
| /// block for the symbol. Used in the IA32 local dynamic TLS access model. |
| /// |
| /// See 'ELF Handling for Thread-Local Storage' for more details. |
| /// SYMBOL_LABEL @TLSLDM |
| MO_TLSLDM, |
| |
| /// MO_GOTTPOFF - On a symbol operand this indicates that the immediate is |
| /// the offset of the GOT entry with the thread-pointer offset for the |
| /// symbol. Used in the x86-64 initial exec TLS access model. |
| /// |
| /// See 'ELF Handling for Thread-Local Storage' for more details. |
| /// SYMBOL_LABEL @GOTTPOFF |
| MO_GOTTPOFF, |
| |
| /// MO_INDNTPOFF - On a symbol operand this indicates that the immediate is |
| /// the absolute address of the GOT entry with the negative thread-pointer |
| /// offset for the symbol. Used in the non-PIC IA32 initial exec TLS access |
| /// model. |
| /// |
| /// See 'ELF Handling for Thread-Local Storage' for more details. |
| /// SYMBOL_LABEL @INDNTPOFF |
| MO_INDNTPOFF, |
| |
| /// MO_TPOFF - On a symbol operand this indicates that the immediate is |
| /// the thread-pointer offset for the symbol. Used in the x86-64 local |
| /// exec TLS access model. |
| /// |
| /// See 'ELF Handling for Thread-Local Storage' for more details. |
| /// SYMBOL_LABEL @TPOFF |
| MO_TPOFF, |
| |
| /// MO_DTPOFF - On a symbol operand this indicates that the immediate is |
| /// the offset of the GOT entry with the TLS offset of the symbol. Used |
| /// in the local dynamic TLS access model. |
| /// |
| /// See 'ELF Handling for Thread-Local Storage' for more details. |
| /// SYMBOL_LABEL @DTPOFF |
| MO_DTPOFF, |
| |
| /// MO_NTPOFF - On a symbol operand this indicates that the immediate is |
| /// the negative thread-pointer offset for the symbol. Used in the IA32 |
| /// local exec TLS access model. |
| /// |
| /// See 'ELF Handling for Thread-Local Storage' for more details. |
| /// SYMBOL_LABEL @NTPOFF |
| MO_NTPOFF, |
| |
| /// MO_GOTNTPOFF - On a symbol operand this indicates that the immediate is |
| /// the offset of the GOT entry with the negative thread-pointer offset for |
| /// the symbol. Used in the PIC IA32 initial exec TLS access model. |
| /// |
| /// See 'ELF Handling for Thread-Local Storage' for more details. |
| /// SYMBOL_LABEL @GOTNTPOFF |
| MO_GOTNTPOFF, |
| |
| /// MO_DLLIMPORT - On a symbol operand "FOO", this indicates that the |
| /// reference is actually to the "__imp_FOO" symbol. This is used for |
| /// dllimport linkage on windows. |
| MO_DLLIMPORT, |
| |
| /// MO_DARWIN_STUB - On a symbol operand "FOO", this indicates that the |
| /// reference is actually to the "FOO$stub" symbol. This is used for calls |
| /// and jumps to external functions on Tiger and earlier. |
| MO_DARWIN_STUB, |
| |
| /// MO_DARWIN_NONLAZY - On a symbol operand "FOO", this indicates that the |
| /// reference is actually to the "FOO$non_lazy_ptr" symbol, which is a |
| /// non-PIC-base-relative reference to a non-hidden dyld lazy pointer stub. |
| MO_DARWIN_NONLAZY, |
| |
| /// MO_DARWIN_NONLAZY_PIC_BASE - On a symbol operand "FOO", this indicates |
| /// that the reference is actually to "FOO$non_lazy_ptr - PICBASE", which is |
| /// a PIC-base-relative reference to a non-hidden dyld lazy pointer stub. |
| MO_DARWIN_NONLAZY_PIC_BASE, |
| |
| /// MO_DARWIN_HIDDEN_NONLAZY_PIC_BASE - On a symbol operand "FOO", this |
| /// indicates that the reference is actually to "FOO$non_lazy_ptr -PICBASE", |
| /// which is a PIC-base-relative reference to a hidden dyld lazy pointer |
| /// stub. |
| MO_DARWIN_HIDDEN_NONLAZY_PIC_BASE, |
| |
| /// MO_TLVP - On a symbol operand this indicates that the immediate is |
| /// some TLS offset. |
| /// |
| /// This is the TLS offset for the Darwin TLS mechanism. |
| MO_TLVP, |
| |
| /// MO_TLVP_PIC_BASE - On a symbol operand this indicates that the immediate |
| /// is some TLS offset from the picbase. |
| /// |
| /// This is the 32-bit TLS offset for Darwin TLS in PIC mode. |
| MO_TLVP_PIC_BASE, |
| |
| /// MO_SECREL - On a symbol operand this indicates that the immediate is |
| /// the offset from beginning of section. |
| /// |
| /// This is the TLS offset for the COFF/Windows TLS mechanism. |
| MO_SECREL |
| }; |
| |
| enum : uint64_t { |
| //===------------------------------------------------------------------===// |
| // Instruction encodings. These are the standard/most common forms for X86 |
| // instructions. |
| // |
| |
| // PseudoFrm - This represents an instruction that is a pseudo instruction |
| // or one that has not been implemented yet. It is illegal to code generate |
| // it, but tolerated for intermediate implementation stages. |
| Pseudo = 0, |
| |
| /// Raw - This form is for instructions that don't have any operands, so |
| /// they are just a fixed opcode value, like 'leave'. |
| RawFrm = 1, |
| |
| /// AddRegFrm - This form is used for instructions like 'push r32' that have |
| /// their one register operand added to their opcode. |
| AddRegFrm = 2, |
| |
| /// MRMDestReg - This form is used for instructions that use the Mod/RM byte |
| /// to specify a destination, which in this case is a register. |
| /// |
| MRMDestReg = 3, |
| |
| /// MRMDestMem - This form is used for instructions that use the Mod/RM byte |
| /// to specify a destination, which in this case is memory. |
| /// |
| MRMDestMem = 4, |
| |
| /// MRMSrcReg - This form is used for instructions that use the Mod/RM byte |
| /// to specify a source, which in this case is a register. |
| /// |
| MRMSrcReg = 5, |
| |
| /// MRMSrcMem - This form is used for instructions that use the Mod/RM byte |
| /// to specify a source, which in this case is memory. |
| /// |
| MRMSrcMem = 6, |
| |
| /// RawFrmMemOffs - This form is for instructions that store an absolute |
| /// memory offset as an immediate with a possible segment override. |
| RawFrmMemOffs = 7, |
| |
| /// RawFrmSrc - This form is for instructions that use the source index |
| /// register SI/ESI/RSI with a possible segment override. |
| RawFrmSrc = 8, |
| |
| /// RawFrmDst - This form is for instructions that use the destination index |
| /// register DI/EDI/ESI. |
| RawFrmDst = 9, |
| |
| /// RawFrmSrc - This form is for instructions that use the source index |
| /// register SI/ESI/ERI with a possible segment override, and also the |
| /// destination index register DI/ESI/RDI. |
| RawFrmDstSrc = 10, |
| |
| /// RawFrmImm8 - This is used for the ENTER instruction, which has two |
| /// immediates, the first of which is a 16-bit immediate (specified by |
| /// the imm encoding) and the second is a 8-bit fixed value. |
| RawFrmImm8 = 11, |
| |
| /// RawFrmImm16 - This is used for CALL FAR instructions, which have two |
| /// immediates, the first of which is a 16 or 32-bit immediate (specified by |
| /// the imm encoding) and the second is a 16-bit fixed value. In the AMD |
| /// manual, this operand is described as pntr16:32 and pntr16:16 |
| RawFrmImm16 = 12, |
| |
| /// MRMX[rm] - The forms are used to represent instructions that use a |
| /// Mod/RM byte, and don't use the middle field for anything. |
| MRMXr = 14, MRMXm = 15, |
| |
| /// MRM[0-7][rm] - These forms are used to represent instructions that use |
| /// a Mod/RM byte, and use the middle field to hold extended opcode |
| /// information. In the intel manual these are represented as /0, /1, ... |
| /// |
| |
| // First, instructions that operate on a register r/m operand... |
| MRM0r = 16, MRM1r = 17, MRM2r = 18, MRM3r = 19, // Format /0 /1 /2 /3 |
| MRM4r = 20, MRM5r = 21, MRM6r = 22, MRM7r = 23, // Format /4 /5 /6 /7 |
| |
| // Next, instructions that operate on a memory r/m operand... |
| MRM0m = 24, MRM1m = 25, MRM2m = 26, MRM3m = 27, // Format /0 /1 /2 /3 |
| MRM4m = 28, MRM5m = 29, MRM6m = 30, MRM7m = 31, // Format /4 /5 /6 /7 |
| |
| //// MRM_XX - A mod/rm byte of exactly 0xXX. |
| MRM_C0 = 32, MRM_C1 = 33, MRM_C2 = 34, MRM_C3 = 35, |
| MRM_C4 = 36, MRM_C5 = 37, MRM_C6 = 38, MRM_C7 = 39, |
| MRM_C8 = 40, MRM_C9 = 41, MRM_CA = 42, MRM_CB = 43, |
| MRM_CC = 44, MRM_CD = 45, MRM_CE = 46, MRM_CF = 47, |
| MRM_D0 = 48, MRM_D1 = 49, MRM_D2 = 50, MRM_D3 = 51, |
| MRM_D4 = 52, MRM_D5 = 53, MRM_D6 = 54, MRM_D7 = 55, |
| MRM_D8 = 56, MRM_D9 = 57, MRM_DA = 58, MRM_DB = 59, |
| MRM_DC = 60, MRM_DD = 61, MRM_DE = 62, MRM_DF = 63, |
| MRM_E0 = 64, MRM_E1 = 65, MRM_E2 = 66, MRM_E3 = 67, |
| MRM_E4 = 68, MRM_E5 = 69, MRM_E6 = 70, MRM_E7 = 71, |
| MRM_E8 = 72, MRM_E9 = 73, MRM_EA = 74, MRM_EB = 75, |
| MRM_EC = 76, MRM_ED = 77, MRM_EE = 78, MRM_EF = 79, |
| MRM_F0 = 80, MRM_F1 = 81, MRM_F2 = 82, MRM_F3 = 83, |
| MRM_F4 = 84, MRM_F5 = 85, MRM_F6 = 86, MRM_F7 = 87, |
| MRM_F8 = 88, MRM_F9 = 89, MRM_FA = 90, MRM_FB = 91, |
| MRM_FC = 92, MRM_FD = 93, MRM_FE = 94, MRM_FF = 95, |
| |
| FormMask = 127, |
| |
| //===------------------------------------------------------------------===// |
| // Actual flags... |
| |
| // OpSize - OpSizeFixed implies instruction never needs a 0x66 prefix. |
| // OpSize16 means this is a 16-bit instruction and needs 0x66 prefix in |
| // 32-bit mode. OpSize32 means this is a 32-bit instruction needs a 0x66 |
| // prefix in 16-bit mode. |
| OpSizeShift = 7, |
| OpSizeMask = 0x3 << OpSizeShift, |
| |
| OpSizeFixed = 0 << OpSizeShift, |
| OpSize16 = 1 << OpSizeShift, |
| OpSize32 = 2 << OpSizeShift, |
| |
| // AsSize - AdSizeX implies this instruction determines its need of 0x67 |
| // prefix from a normal ModRM memory operand. The other types indicate that |
| // an operand is encoded with a specific width and a prefix is needed if |
| // it differs from the current mode. |
| AdSizeShift = OpSizeShift + 2, |
| AdSizeMask = 0x3 << AdSizeShift, |
| |
| AdSizeX = 1 << AdSizeShift, |
| AdSize16 = 1 << AdSizeShift, |
| AdSize32 = 2 << AdSizeShift, |
| AdSize64 = 3 << AdSizeShift, |
| |
| //===------------------------------------------------------------------===// |
| // OpPrefix - There are several prefix bytes that are used as opcode |
| // extensions. These are 0x66, 0xF3, and 0xF2. If this field is 0 there is |
| // no prefix. |
| // |
| OpPrefixShift = AdSizeShift + 2, |
| OpPrefixMask = 0x7 << OpPrefixShift, |
| |
| // PS, PD - Prefix code for packed single and double precision vector |
| // floating point operations performed in the SSE registers. |
| PS = 1 << OpPrefixShift, PD = 2 << OpPrefixShift, |
| |
| // XS, XD - These prefix codes are for single and double precision scalar |
| // floating point operations performed in the SSE registers. |
| XS = 3 << OpPrefixShift, XD = 4 << OpPrefixShift, |
| |
| //===------------------------------------------------------------------===// |
| // OpMap - This field determines which opcode map this instruction |
| // belongs to. i.e. one-byte, two-byte, 0x0f 0x38, 0x0f 0x3a, etc. |
| // |
| OpMapShift = OpPrefixShift + 3, |
| OpMapMask = 0x7 << OpMapShift, |
| |
| // OB - OneByte - Set if this instruction has a one byte opcode. |
| OB = 0 << OpMapShift, |
| |
| // TB - TwoByte - Set if this instruction has a two byte opcode, which |
| // starts with a 0x0F byte before the real opcode. |
| TB = 1 << OpMapShift, |
| |
| // T8, TA - Prefix after the 0x0F prefix. |
| T8 = 2 << OpMapShift, TA = 3 << OpMapShift, |
| |
| // XOP8 - Prefix to include use of imm byte. |
| XOP8 = 4 << OpMapShift, |
| |
| // XOP9 - Prefix to exclude use of imm byte. |
| XOP9 = 5 << OpMapShift, |
| |
| // XOPA - Prefix to encode 0xA in VEX.MMMM of XOP instructions. |
| XOPA = 6 << OpMapShift, |
| |
| //===------------------------------------------------------------------===// |
| // REX_W - REX prefixes are instruction prefixes used in 64-bit mode. |
| // They are used to specify GPRs and SSE registers, 64-bit operand size, |
| // etc. We only cares about REX.W and REX.R bits and only the former is |
| // statically determined. |
| // |
| REXShift = OpMapShift + 3, |
| REX_W = 1 << REXShift, |
| |
| //===------------------------------------------------------------------===// |
| // This three-bit field describes the size of an immediate operand. Zero is |
| // unused so that we can tell if we forgot to set a value. |
| ImmShift = REXShift + 1, |
| ImmMask = 15 << ImmShift, |
| Imm8 = 1 << ImmShift, |
| Imm8PCRel = 2 << ImmShift, |
| Imm16 = 3 << ImmShift, |
| Imm16PCRel = 4 << ImmShift, |
| Imm32 = 5 << ImmShift, |
| Imm32PCRel = 6 << ImmShift, |
| Imm32S = 7 << ImmShift, |
| Imm64 = 8 << ImmShift, |
| |
| //===------------------------------------------------------------------===// |
| // FP Instruction Classification... Zero is non-fp instruction. |
| |
| // FPTypeMask - Mask for all of the FP types... |
| FPTypeShift = ImmShift + 4, |
| FPTypeMask = 7 << FPTypeShift, |
| |
| // NotFP - The default, set for instructions that do not use FP registers. |
| NotFP = 0 << FPTypeShift, |
| |
| // ZeroArgFP - 0 arg FP instruction which implicitly pushes ST(0), f.e. fld0 |
| ZeroArgFP = 1 << FPTypeShift, |
| |
| // OneArgFP - 1 arg FP instructions which implicitly read ST(0), such as fst |
| OneArgFP = 2 << FPTypeShift, |
| |
| // OneArgFPRW - 1 arg FP instruction which implicitly read ST(0) and write a |
| // result back to ST(0). For example, fcos, fsqrt, etc. |
| // |
| OneArgFPRW = 3 << FPTypeShift, |
| |
| // TwoArgFP - 2 arg FP instructions which implicitly read ST(0), and an |
| // explicit argument, storing the result to either ST(0) or the implicit |
| // argument. For example: fadd, fsub, fmul, etc... |
| TwoArgFP = 4 << FPTypeShift, |
| |
| // CompareFP - 2 arg FP instructions which implicitly read ST(0) and an |
| // explicit argument, but have no destination. Example: fucom, fucomi, ... |
| CompareFP = 5 << FPTypeShift, |
| |
| // CondMovFP - "2 operand" floating point conditional move instructions. |
| CondMovFP = 6 << FPTypeShift, |
| |
| // SpecialFP - Special instruction forms. Dispatch by opcode explicitly. |
| SpecialFP = 7 << FPTypeShift, |
| |
| // Lock prefix |
| LOCKShift = FPTypeShift + 3, |
| LOCK = 1 << LOCKShift, |
| |
| // REP prefix |
| REPShift = LOCKShift + 1, |
| REP = 1 << REPShift, |
| |
| // Execution domain for SSE instructions. |
| // 0 means normal, non-SSE instruction. |
| SSEDomainShift = REPShift + 1, |
| |
| // Encoding |
| EncodingShift = SSEDomainShift + 2, |
| EncodingMask = 0x3 << EncodingShift, |
| |
| // VEX - encoding using 0xC4/0xC5 |
| VEX = 1 << EncodingShift, |
| |
| /// XOP - Opcode prefix used by XOP instructions. |
| XOP = 2 << EncodingShift, |
| |
| // VEX_EVEX - Specifies that this instruction use EVEX form which provides |
| // syntax support up to 32 512-bit register operands and up to 7 16-bit |
| // mask operands as well as source operand data swizzling/memory operand |
| // conversion, eviction hint, and rounding mode. |
| EVEX = 3 << EncodingShift, |
| |
| // Opcode |
| OpcodeShift = EncodingShift + 2, |
| |
| /// VEX_W - Has a opcode specific functionality, but is used in the same |
| /// way as REX_W is for regular SSE instructions. |
| VEX_WShift = OpcodeShift + 8, |
| VEX_W = 1ULL << VEX_WShift, |
| |
| /// VEX_4V - Used to specify an additional AVX/SSE register. Several 2 |
| /// address instructions in SSE are represented as 3 address ones in AVX |
| /// and the additional register is encoded in VEX_VVVV prefix. |
| VEX_4VShift = VEX_WShift + 1, |
| VEX_4V = 1ULL << VEX_4VShift, |
| |
| /// VEX_4VOp3 - Similar to VEX_4V, but used on instructions that encode |
| /// operand 3 with VEX.vvvv. |
| VEX_4VOp3Shift = VEX_4VShift + 1, |
| VEX_4VOp3 = 1ULL << VEX_4VOp3Shift, |
| |
| /// VEX_I8IMM - Specifies that the last register used in a AVX instruction, |
| /// must be encoded in the i8 immediate field. This usually happens in |
| /// instructions with 4 operands. |
| VEX_I8IMMShift = VEX_4VOp3Shift + 1, |
| VEX_I8IMM = 1ULL << VEX_I8IMMShift, |
| |
| /// VEX_L - Stands for a bit in the VEX opcode prefix meaning the current |
| /// instruction uses 256-bit wide registers. This is usually auto detected |
| /// if a VR256 register is used, but some AVX instructions also have this |
| /// field marked when using a f256 memory references. |
| VEX_LShift = VEX_I8IMMShift + 1, |
| VEX_L = 1ULL << VEX_LShift, |
| |
| // VEX_LIG - Specifies that this instruction ignores the L-bit in the VEX |
| // prefix. Usually used for scalar instructions. Needed by disassembler. |
| VEX_LIGShift = VEX_LShift + 1, |
| VEX_LIG = 1ULL << VEX_LIGShift, |
| |
| // TODO: we should combine VEX_L and VEX_LIG together to form a 2-bit field |
| // with following encoding: |
| // - 00 V128 |
| // - 01 V256 |
| // - 10 V512 |
| // - 11 LIG (but, in insn encoding, leave VEX.L and EVEX.L in zeros. |
| // this will save 1 tsflag bit |
| |
| // EVEX_K - Set if this instruction requires masking |
| EVEX_KShift = VEX_LIGShift + 1, |
| EVEX_K = 1ULL << EVEX_KShift, |
| |
| // EVEX_Z - Set if this instruction has EVEX.Z field set. |
| EVEX_ZShift = EVEX_KShift + 1, |
| EVEX_Z = 1ULL << EVEX_ZShift, |
| |
| // EVEX_L2 - Set if this instruction has EVEX.L' field set. |
| EVEX_L2Shift = EVEX_ZShift + 1, |
| EVEX_L2 = 1ULL << EVEX_L2Shift, |
| |
| // EVEX_B - Set if this instruction has EVEX.B field set. |
| EVEX_BShift = EVEX_L2Shift + 1, |
| EVEX_B = 1ULL << EVEX_BShift, |
| |
| // The scaling factor for the AVX512's 8-bit compressed displacement. |
| CD8_Scale_Shift = EVEX_BShift + 1, |
| CD8_Scale_Mask = 127ULL << CD8_Scale_Shift, |
| |
| /// Has3DNow0F0FOpcode - This flag indicates that the instruction uses the |
| /// wacky 0x0F 0x0F prefix for 3DNow! instructions. The manual documents |
| /// this as having a 0x0F prefix with a 0x0F opcode, and each instruction |
| /// storing a classifier in the imm8 field. To simplify our implementation, |
| /// we handle this by storeing the classifier in the opcode field and using |
| /// this flag to indicate that the encoder should do the wacky 3DNow! thing. |
| Has3DNow0F0FOpcodeShift = CD8_Scale_Shift + 7, |
| Has3DNow0F0FOpcode = 1ULL << Has3DNow0F0FOpcodeShift, |
| |
| /// MemOp4 - Used to indicate swapping of operand 3 and 4 to be encoded in |
| /// ModRM or I8IMM. This is used for FMA4 and XOP instructions. |
| MemOp4Shift = Has3DNow0F0FOpcodeShift + 1, |
| MemOp4 = 1ULL << MemOp4Shift, |
| |
| /// Explicitly specified rounding control |
| EVEX_RCShift = MemOp4Shift + 1, |
| EVEX_RC = 1ULL << EVEX_RCShift |
| }; |
| |
| // getBaseOpcodeFor - This function returns the "base" X86 opcode for the |
| // specified machine instruction. |
| // |
| inline unsigned char getBaseOpcodeFor(uint64_t TSFlags) { |
| return TSFlags >> X86II::OpcodeShift; |
| } |
| |
| inline bool hasImm(uint64_t TSFlags) { |
| return (TSFlags & X86II::ImmMask) != 0; |
| } |
| |
| /// getSizeOfImm - Decode the "size of immediate" field from the TSFlags field |
| /// of the specified instruction. |
| inline unsigned getSizeOfImm(uint64_t TSFlags) { |
| switch (TSFlags & X86II::ImmMask) { |
| default: llvm_unreachable("Unknown immediate size"); |
| case X86II::Imm8: |
| case X86II::Imm8PCRel: return 1; |
| case X86II::Imm16: |
| case X86II::Imm16PCRel: return 2; |
| case X86II::Imm32: |
| case X86II::Imm32S: |
| case X86II::Imm32PCRel: return 4; |
| case X86II::Imm64: return 8; |
| } |
| } |
| |
| /// isImmPCRel - Return true if the immediate of the specified instruction's |
| /// TSFlags indicates that it is pc relative. |
| inline unsigned isImmPCRel(uint64_t TSFlags) { |
| switch (TSFlags & X86II::ImmMask) { |
| default: llvm_unreachable("Unknown immediate size"); |
| case X86II::Imm8PCRel: |
| case X86II::Imm16PCRel: |
| case X86II::Imm32PCRel: |
| return true; |
| case X86II::Imm8: |
| case X86II::Imm16: |
| case X86II::Imm32: |
| case X86II::Imm32S: |
| case X86II::Imm64: |
| return false; |
| } |
| } |
| |
| /// isImmSigned - Return true if the immediate of the specified instruction's |
| /// TSFlags indicates that it is signed. |
| inline unsigned isImmSigned(uint64_t TSFlags) { |
| switch (TSFlags & X86II::ImmMask) { |
| default: llvm_unreachable("Unknown immediate signedness"); |
| case X86II::Imm32S: |
| return true; |
| case X86II::Imm8: |
| case X86II::Imm8PCRel: |
| case X86II::Imm16: |
| case X86II::Imm16PCRel: |
| case X86II::Imm32: |
| case X86II::Imm32PCRel: |
| case X86II::Imm64: |
| return false; |
| } |
| } |
| |
| /// getOperandBias - compute any additional adjustment needed to |
| /// the offset to the start of the memory operand |
| /// in this instruction. |
| /// If this is a two-address instruction,skip one of the register operands. |
| /// FIXME: This should be handled during MCInst lowering. |
| inline int getOperandBias(const MCInstrDesc& Desc) |
| { |
| unsigned NumOps = Desc.getNumOperands(); |
| unsigned CurOp = 0; |
| if (NumOps > 1 && Desc.getOperandConstraint(1, MCOI::TIED_TO) == 0) |
| ++CurOp; |
| else if (NumOps > 3 && Desc.getOperandConstraint(2, MCOI::TIED_TO) == 0 && |
| Desc.getOperandConstraint(3, MCOI::TIED_TO) == 1) |
| // Special case for AVX-512 GATHER with 2 TIED_TO operands |
| // Skip the first 2 operands: dst, mask_wb |
| CurOp += 2; |
| else if (NumOps > 3 && Desc.getOperandConstraint(2, MCOI::TIED_TO) == 0 && |
| Desc.getOperandConstraint(NumOps - 1, MCOI::TIED_TO) == 1) |
| // Special case for GATHER with 2 TIED_TO operands |
| // Skip the first 2 operands: dst, mask_wb |
| CurOp += 2; |
| else if (NumOps > 2 && Desc.getOperandConstraint(NumOps - 2, MCOI::TIED_TO) == 0) |
| // SCATTER |
| ++CurOp; |
| return CurOp; |
| } |
| |
| /// getMemoryOperandNo - The function returns the MCInst operand # for the |
| /// first field of the memory operand. If the instruction doesn't have a |
| /// memory operand, this returns -1. |
| /// |
| /// Note that this ignores tied operands. If there is a tied register which |
| /// is duplicated in the MCInst (e.g. "EAX = addl EAX, [mem]") it is only |
| /// counted as one operand. |
| /// |
| inline int getMemoryOperandNo(uint64_t TSFlags, unsigned Opcode) { |
| bool HasVEX_4V = TSFlags & X86II::VEX_4V; |
| bool HasMemOp4 = TSFlags & X86II::MemOp4; |
| bool HasEVEX_K = TSFlags & X86II::EVEX_K; |
| |
| switch (TSFlags & X86II::FormMask) { |
| default: llvm_unreachable("Unknown FormMask value in getMemoryOperandNo!"); |
| case X86II::Pseudo: |
| case X86II::RawFrm: |
| case X86II::AddRegFrm: |
| case X86II::MRMDestReg: |
| case X86II::MRMSrcReg: |
| case X86II::RawFrmImm8: |
| case X86II::RawFrmImm16: |
| case X86II::RawFrmMemOffs: |
| case X86II::RawFrmSrc: |
| case X86II::RawFrmDst: |
| case X86II::RawFrmDstSrc: |
| return -1; |
| case X86II::MRMDestMem: |
| return 0; |
| case X86II::MRMSrcMem: |
| // Start from 1, skip any registers encoded in VEX_VVVV or I8IMM, or a |
| // mask register. |
| return 1 + HasVEX_4V + HasMemOp4 + HasEVEX_K; |
| case X86II::MRMXr: |
| case X86II::MRM0r: case X86II::MRM1r: |
| case X86II::MRM2r: case X86II::MRM3r: |
| case X86II::MRM4r: case X86II::MRM5r: |
| case X86II::MRM6r: case X86II::MRM7r: |
| return -1; |
| case X86II::MRMXm: |
| case X86II::MRM0m: case X86II::MRM1m: |
| case X86II::MRM2m: case X86II::MRM3m: |
| case X86II::MRM4m: case X86II::MRM5m: |
| case X86II::MRM6m: case X86II::MRM7m: |
| // Start from 0, skip registers encoded in VEX_VVVV or a mask register. |
| return 0 + HasVEX_4V + HasEVEX_K; |
| case X86II::MRM_C0: case X86II::MRM_C1: case X86II::MRM_C2: |
| case X86II::MRM_C3: case X86II::MRM_C4: case X86II::MRM_C8: |
| case X86II::MRM_C9: case X86II::MRM_CA: case X86II::MRM_CB: |
| case X86II::MRM_CF: case X86II::MRM_D0: case X86II::MRM_D1: |
| case X86II::MRM_D4: case X86II::MRM_D5: case X86II::MRM_D6: |
| case X86II::MRM_D7: case X86II::MRM_D8: case X86II::MRM_D9: |
| case X86II::MRM_DA: case X86II::MRM_DB: case X86II::MRM_DC: |
| case X86II::MRM_DD: case X86II::MRM_DE: case X86II::MRM_DF: |
| case X86II::MRM_E0: case X86II::MRM_E1: case X86II::MRM_E2: |
| case X86II::MRM_E3: case X86II::MRM_E4: case X86II::MRM_E5: |
| case X86II::MRM_E8: case X86II::MRM_E9: case X86II::MRM_EA: |
| case X86II::MRM_EB: case X86II::MRM_EC: case X86II::MRM_ED: |
| case X86II::MRM_EE: case X86II::MRM_F0: case X86II::MRM_F1: |
| case X86II::MRM_F2: case X86II::MRM_F3: case X86II::MRM_F4: |
| case X86II::MRM_F5: case X86II::MRM_F6: case X86II::MRM_F7: |
| case X86II::MRM_F8: case X86II::MRM_F9: case X86II::MRM_FA: |
| case X86II::MRM_FB: case X86II::MRM_FC: case X86II::MRM_FD: |
| case X86II::MRM_FE: case X86II::MRM_FF: |
| return -1; |
| } |
| } |
| |
| /// isX86_64ExtendedReg - Is the MachineOperand a x86-64 extended (r8 or |
| /// higher) register? e.g. r8, xmm8, xmm13, etc. |
| inline bool isX86_64ExtendedReg(unsigned RegNo) { |
| if ((RegNo > X86::XMM7 && RegNo <= X86::XMM15) || |
| (RegNo > X86::XMM23 && RegNo <= X86::XMM31) || |
| (RegNo > X86::YMM7 && RegNo <= X86::YMM15) || |
| (RegNo > X86::YMM23 && RegNo <= X86::YMM31) || |
| (RegNo > X86::ZMM7 && RegNo <= X86::ZMM15) || |
| (RegNo > X86::ZMM23 && RegNo <= X86::ZMM31)) |
| return true; |
| |
| switch (RegNo) { |
| default: break; |
| case X86::R8: case X86::R9: case X86::R10: case X86::R11: |
| case X86::R12: case X86::R13: case X86::R14: case X86::R15: |
| case X86::R8D: case X86::R9D: case X86::R10D: case X86::R11D: |
| case X86::R12D: case X86::R13D: case X86::R14D: case X86::R15D: |
| case X86::R8W: case X86::R9W: case X86::R10W: case X86::R11W: |
| case X86::R12W: case X86::R13W: case X86::R14W: case X86::R15W: |
| case X86::R8B: case X86::R9B: case X86::R10B: case X86::R11B: |
| case X86::R12B: case X86::R13B: case X86::R14B: case X86::R15B: |
| case X86::CR8: case X86::CR9: case X86::CR10: case X86::CR11: |
| case X86::CR12: case X86::CR13: case X86::CR14: case X86::CR15: |
| return true; |
| } |
| return false; |
| } |
| |
| /// is32ExtendedReg - Is the MemoryOperand a 32 extended (zmm16 or higher) |
| /// registers? e.g. zmm21, etc. |
| static inline bool is32ExtendedReg(unsigned RegNo) { |
| return ((RegNo > X86::XMM15 && RegNo <= X86::XMM31) || |
| (RegNo > X86::YMM15 && RegNo <= X86::YMM31) || |
| (RegNo > X86::ZMM15 && RegNo <= X86::ZMM31)); |
| } |
| |
| |
| inline bool isX86_64NonExtLowByteReg(unsigned reg) { |
| return (reg == X86::SPL || reg == X86::BPL || |
| reg == X86::SIL || reg == X86::DIL); |
| } |
| } |
| |
| } // end namespace llvm; |
| |
| #endif |