| //===-- X86InstrControl.td - Control Flow Instructions -----*- tablegen -*-===// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file is distributed under the University of Illinois Open Source |
| // License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file describes the X86 jump, return, call, and related instructions. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| //===----------------------------------------------------------------------===// |
| // Control Flow Instructions. |
| // |
| |
| // Return instructions. |
| // |
| // The X86retflag return instructions are variadic because we may add ST0 and |
| // ST1 arguments when returning values on the x87 stack. |
| let isTerminator = 1, isReturn = 1, isBarrier = 1, |
| hasCtrlDep = 1, FPForm = SpecialFP, SchedRW = [WriteJumpLd] in { |
| def RETL : I <0xC3, RawFrm, (outs), (ins variable_ops), |
| "ret{l}", [], IIC_RET>, OpSize32, |
| Requires<[Not64BitMode]>; |
| def RETQ : I <0xC3, RawFrm, (outs), (ins variable_ops), |
| "ret{q}", [], IIC_RET>, OpSize32, |
| Requires<[In64BitMode]>; |
| def RETW : I <0xC3, RawFrm, (outs), (ins), |
| "ret{w}", |
| [], IIC_RET>, OpSize16; |
| def RETIL : Ii16<0xC2, RawFrm, (outs), (ins i16imm:$amt, variable_ops), |
| "ret{l}\t$amt", |
| [], IIC_RET_IMM>, OpSize32, |
| Requires<[Not64BitMode]>; |
| def RETIQ : Ii16<0xC2, RawFrm, (outs), (ins i16imm:$amt, variable_ops), |
| "ret{q}\t$amt", |
| [], IIC_RET_IMM>, OpSize32, |
| Requires<[In64BitMode]>; |
| def RETIW : Ii16<0xC2, RawFrm, (outs), (ins i16imm:$amt), |
| "ret{w}\t$amt", |
| [], IIC_RET_IMM>, OpSize16; |
| def LRETL : I <0xCB, RawFrm, (outs), (ins), |
| "{l}ret{l|f}", [], IIC_RET>, OpSize32; |
| def LRETQ : RI <0xCB, RawFrm, (outs), (ins), |
| "{l}ret{|f}q", [], IIC_RET>, Requires<[In64BitMode]>; |
| def LRETW : I <0xCB, RawFrm, (outs), (ins), |
| "{l}ret{w|f}", [], IIC_RET>, OpSize16; |
| def LRETIL : Ii16<0xCA, RawFrm, (outs), (ins i16imm:$amt), |
| "{l}ret{l|f}\t$amt", [], IIC_RET>, OpSize32; |
| def LRETIQ : RIi16<0xCA, RawFrm, (outs), (ins i16imm:$amt), |
| "{l}ret{|f}q\t$amt", [], IIC_RET>, Requires<[In64BitMode]>; |
| def LRETIW : Ii16<0xCA, RawFrm, (outs), (ins i16imm:$amt), |
| "{l}ret{w|f}\t$amt", [], IIC_RET>, OpSize16; |
| |
| // The machine return from interrupt instruction, but sometimes we need to |
| // perform a post-epilogue stack adjustment. Codegen emits the pseudo form |
| // which expands to include an SP adjustment if necessary. |
| def IRET16 : I <0xcf, RawFrm, (outs), (ins), "iret{w}", [], IIC_IRET>, |
| OpSize16; |
| def IRET32 : I <0xcf, RawFrm, (outs), (ins), "iret{l|d}", [], |
| IIC_IRET>, OpSize32; |
| def IRET64 : RI <0xcf, RawFrm, (outs), (ins), "iretq", [], |
| IIC_IRET>, Requires<[In64BitMode]>; |
| let isCodeGenOnly = 1 in |
| def IRET : PseudoI<(outs), (ins i32imm:$adj), [(X86iret timm:$adj)]>; |
| def RET : PseudoI<(outs), (ins i32imm:$adj, variable_ops), [(X86retflag timm:$adj)]>; |
| } |
| |
| // Unconditional branches. |
| let isBarrier = 1, isBranch = 1, isTerminator = 1, SchedRW = [WriteJump] in { |
| def JMP_1 : Ii8PCRel<0xEB, RawFrm, (outs), (ins brtarget8:$dst), |
| "jmp\t$dst", [(br bb:$dst)], IIC_JMP_REL>; |
| let hasSideEffects = 0, isCodeGenOnly = 1, ForceDisassemble = 1 in { |
| def JMP_2 : Ii16PCRel<0xE9, RawFrm, (outs), (ins brtarget16:$dst), |
| "jmp\t$dst", [], IIC_JMP_REL>, OpSize16; |
| def JMP_4 : Ii32PCRel<0xE9, RawFrm, (outs), (ins brtarget32:$dst), |
| "jmp\t$dst", [], IIC_JMP_REL>, OpSize32; |
| } |
| } |
| |
| // Conditional Branches. |
| let isBranch = 1, isTerminator = 1, Uses = [EFLAGS], SchedRW = [WriteJump] in { |
| multiclass ICBr<bits<8> opc1, bits<8> opc4, string asm, PatFrag Cond> { |
| def _1 : Ii8PCRel <opc1, RawFrm, (outs), (ins brtarget8:$dst), asm, |
| [(X86brcond bb:$dst, Cond, EFLAGS)], IIC_Jcc>; |
| let hasSideEffects = 0, isCodeGenOnly = 1, ForceDisassemble = 1 in { |
| def _2 : Ii16PCRel<opc4, RawFrm, (outs), (ins brtarget16:$dst), asm, |
| [], IIC_Jcc>, OpSize16, TB; |
| def _4 : Ii32PCRel<opc4, RawFrm, (outs), (ins brtarget32:$dst), asm, |
| [], IIC_Jcc>, TB, OpSize32; |
| } |
| } |
| } |
| |
| defm JO : ICBr<0x70, 0x80, "jo\t$dst" , X86_COND_O>; |
| defm JNO : ICBr<0x71, 0x81, "jno\t$dst", X86_COND_NO>; |
| defm JB : ICBr<0x72, 0x82, "jb\t$dst" , X86_COND_B>; |
| defm JAE : ICBr<0x73, 0x83, "jae\t$dst", X86_COND_AE>; |
| defm JE : ICBr<0x74, 0x84, "je\t$dst" , X86_COND_E>; |
| defm JNE : ICBr<0x75, 0x85, "jne\t$dst", X86_COND_NE>; |
| defm JBE : ICBr<0x76, 0x86, "jbe\t$dst", X86_COND_BE>; |
| defm JA : ICBr<0x77, 0x87, "ja\t$dst" , X86_COND_A>; |
| defm JS : ICBr<0x78, 0x88, "js\t$dst" , X86_COND_S>; |
| defm JNS : ICBr<0x79, 0x89, "jns\t$dst", X86_COND_NS>; |
| defm JP : ICBr<0x7A, 0x8A, "jp\t$dst" , X86_COND_P>; |
| defm JNP : ICBr<0x7B, 0x8B, "jnp\t$dst", X86_COND_NP>; |
| defm JL : ICBr<0x7C, 0x8C, "jl\t$dst" , X86_COND_L>; |
| defm JGE : ICBr<0x7D, 0x8D, "jge\t$dst", X86_COND_GE>; |
| defm JLE : ICBr<0x7E, 0x8E, "jle\t$dst", X86_COND_LE>; |
| defm JG : ICBr<0x7F, 0x8F, "jg\t$dst" , X86_COND_G>; |
| |
| // jcx/jecx/jrcx instructions. |
| let isBranch = 1, isTerminator = 1, hasSideEffects = 0, SchedRW = [WriteJump] in { |
| // These are the 32-bit versions of this instruction for the asmparser. In |
| // 32-bit mode, the address size prefix is jcxz and the unprefixed version is |
| // jecxz. |
| let Uses = [CX] in |
| def JCXZ : Ii8PCRel<0xE3, RawFrm, (outs), (ins brtarget8:$dst), |
| "jcxz\t$dst", [], IIC_JCXZ>, AdSize16, |
| Requires<[Not64BitMode]>; |
| let Uses = [ECX] in |
| def JECXZ : Ii8PCRel<0xE3, RawFrm, (outs), (ins brtarget8:$dst), |
| "jecxz\t$dst", [], IIC_JCXZ>, AdSize32; |
| |
| let Uses = [RCX] in |
| def JRCXZ : Ii8PCRel<0xE3, RawFrm, (outs), (ins brtarget8:$dst), |
| "jrcxz\t$dst", [], IIC_JCXZ>, AdSize64, |
| Requires<[In64BitMode]>; |
| } |
| |
| // Indirect branches |
| let isBranch = 1, isTerminator = 1, isBarrier = 1, isIndirectBranch = 1 in { |
| def JMP16r : I<0xFF, MRM4r, (outs), (ins GR16:$dst), "jmp{w}\t{*}$dst", |
| [(brind GR16:$dst)], IIC_JMP_REG>, Requires<[Not64BitMode]>, |
| OpSize16, Sched<[WriteJump]>; |
| def JMP16m : I<0xFF, MRM4m, (outs), (ins i16mem:$dst), "jmp{w}\t{*}$dst", |
| [(brind (loadi16 addr:$dst))], IIC_JMP_MEM>, |
| Requires<[Not64BitMode]>, OpSize16, Sched<[WriteJumpLd]>; |
| |
| def JMP32r : I<0xFF, MRM4r, (outs), (ins GR32:$dst), "jmp{l}\t{*}$dst", |
| [(brind GR32:$dst)], IIC_JMP_REG>, Requires<[Not64BitMode]>, |
| OpSize32, Sched<[WriteJump]>; |
| def JMP32m : I<0xFF, MRM4m, (outs), (ins i32mem:$dst), "jmp{l}\t{*}$dst", |
| [(brind (loadi32 addr:$dst))], IIC_JMP_MEM>, |
| Requires<[Not64BitMode]>, OpSize32, Sched<[WriteJumpLd]>; |
| |
| def JMP64r : I<0xFF, MRM4r, (outs), (ins GR64:$dst), "jmp{q}\t{*}$dst", |
| [(brind GR64:$dst)], IIC_JMP_REG>, Requires<[In64BitMode]>, |
| Sched<[WriteJump]>; |
| def JMP64m : I<0xFF, MRM4m, (outs), (ins i64mem:$dst), "jmp{q}\t{*}$dst", |
| [(brind (loadi64 addr:$dst))], IIC_JMP_MEM>, |
| Requires<[In64BitMode]>, Sched<[WriteJumpLd]>; |
| |
| let Predicates = [Not64BitMode] in { |
| def FARJMP16i : Iseg16<0xEA, RawFrmImm16, (outs), |
| (ins i16imm:$off, i16imm:$seg), |
| "ljmp{w}\t$seg, $off", [], |
| IIC_JMP_FAR_PTR>, OpSize16, Sched<[WriteJump]>; |
| def FARJMP32i : Iseg32<0xEA, RawFrmImm16, (outs), |
| (ins i32imm:$off, i16imm:$seg), |
| "ljmp{l}\t$seg, $off", [], |
| IIC_JMP_FAR_PTR>, OpSize32, Sched<[WriteJump]>; |
| } |
| def FARJMP64 : RI<0xFF, MRM5m, (outs), (ins opaque80mem:$dst), |
| "ljmp{q}\t{*}$dst", [], IIC_JMP_FAR_MEM>, |
| Sched<[WriteJump]>; |
| |
| def FARJMP16m : I<0xFF, MRM5m, (outs), (ins opaque32mem:$dst), |
| "ljmp{w}\t{*}$dst", [], IIC_JMP_FAR_MEM>, OpSize16, |
| Sched<[WriteJumpLd]>; |
| def FARJMP32m : I<0xFF, MRM5m, (outs), (ins opaque48mem:$dst), |
| "{l}jmp{l}\t{*}$dst", [], IIC_JMP_FAR_MEM>, OpSize32, |
| Sched<[WriteJumpLd]>; |
| } |
| |
| |
| // Loop instructions |
| let SchedRW = [WriteJump] in { |
| def LOOP : Ii8PCRel<0xE2, RawFrm, (outs), (ins brtarget8:$dst), "loop\t$dst", [], IIC_LOOP>; |
| def LOOPE : Ii8PCRel<0xE1, RawFrm, (outs), (ins brtarget8:$dst), "loope\t$dst", [], IIC_LOOPE>; |
| def LOOPNE : Ii8PCRel<0xE0, RawFrm, (outs), (ins brtarget8:$dst), "loopne\t$dst", [], IIC_LOOPNE>; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Call Instructions... |
| // |
| let isCall = 1 in |
| // All calls clobber the non-callee saved registers. ESP is marked as |
| // a use to prevent stack-pointer assignments that appear immediately |
| // before calls from potentially appearing dead. Uses for argument |
| // registers are added manually. |
| let Uses = [ESP] in { |
| def CALLpcrel32 : Ii32PCRel<0xE8, RawFrm, |
| (outs), (ins i32imm_pcrel:$dst), |
| "call{l}\t$dst", [], IIC_CALL_RI>, OpSize32, |
| Requires<[Not64BitMode]>, Sched<[WriteJump]>; |
| let hasSideEffects = 0 in |
| def CALLpcrel16 : Ii16PCRel<0xE8, RawFrm, |
| (outs), (ins i16imm_pcrel:$dst), |
| "call{w}\t$dst", [], IIC_CALL_RI>, OpSize16, |
| Sched<[WriteJump]>; |
| def CALL16r : I<0xFF, MRM2r, (outs), (ins GR16:$dst), |
| "call{w}\t{*}$dst", [(X86call GR16:$dst)], IIC_CALL_RI>, |
| OpSize16, Requires<[Not64BitMode]>, Sched<[WriteJump]>; |
| def CALL16m : I<0xFF, MRM2m, (outs), (ins i16mem:$dst), |
| "call{w}\t{*}$dst", [(X86call (loadi16 addr:$dst))], |
| IIC_CALL_MEM>, OpSize16, |
| Requires<[Not64BitMode,FavorMemIndirectCall]>, |
| Sched<[WriteJumpLd]>; |
| def CALL32r : I<0xFF, MRM2r, (outs), (ins GR32:$dst), |
| "call{l}\t{*}$dst", [(X86call GR32:$dst)], IIC_CALL_RI>, |
| OpSize32, Requires<[Not64BitMode]>, Sched<[WriteJump]>; |
| def CALL32m : I<0xFF, MRM2m, (outs), (ins i32mem:$dst), |
| "call{l}\t{*}$dst", [(X86call (loadi32 addr:$dst))], |
| IIC_CALL_MEM>, OpSize32, |
| Requires<[Not64BitMode,FavorMemIndirectCall]>, |
| Sched<[WriteJumpLd]>; |
| |
| let Predicates = [Not64BitMode] in { |
| def FARCALL16i : Iseg16<0x9A, RawFrmImm16, (outs), |
| (ins i16imm:$off, i16imm:$seg), |
| "lcall{w}\t$seg, $off", [], |
| IIC_CALL_FAR_PTR>, OpSize16, Sched<[WriteJump]>; |
| def FARCALL32i : Iseg32<0x9A, RawFrmImm16, (outs), |
| (ins i32imm:$off, i16imm:$seg), |
| "lcall{l}\t$seg, $off", [], |
| IIC_CALL_FAR_PTR>, OpSize32, Sched<[WriteJump]>; |
| } |
| |
| def FARCALL16m : I<0xFF, MRM3m, (outs), (ins opaque32mem:$dst), |
| "lcall{w}\t{*}$dst", [], IIC_CALL_FAR_MEM>, OpSize16, |
| Sched<[WriteJumpLd]>; |
| def FARCALL32m : I<0xFF, MRM3m, (outs), (ins opaque48mem:$dst), |
| "{l}call{l}\t{*}$dst", [], IIC_CALL_FAR_MEM>, OpSize32, |
| Sched<[WriteJumpLd]>; |
| } |
| |
| |
| // Tail call stuff. |
| let isCall = 1, isTerminator = 1, isReturn = 1, isBarrier = 1, |
| isCodeGenOnly = 1, SchedRW = [WriteJumpLd] in |
| let Uses = [ESP] in { |
| def TCRETURNdi : PseudoI<(outs), |
| (ins i32imm_pcrel:$dst, i32imm:$offset), []>, NotMemoryFoldable; |
| def TCRETURNri : PseudoI<(outs), |
| (ins ptr_rc_tailcall:$dst, i32imm:$offset), []>, NotMemoryFoldable; |
| let mayLoad = 1 in |
| def TCRETURNmi : PseudoI<(outs), |
| (ins i32mem_TC:$dst, i32imm:$offset), []>; |
| |
| // FIXME: The should be pseudo instructions that are lowered when going to |
| // mcinst. |
| def TAILJMPd : Ii32PCRel<0xE9, RawFrm, (outs), |
| (ins i32imm_pcrel:$dst), |
| "jmp\t$dst", |
| [], IIC_JMP_REL>; |
| |
| def TAILJMPr : I<0xFF, MRM4r, (outs), (ins ptr_rc_tailcall:$dst), |
| "", [], IIC_JMP_REG>; // FIXME: Remove encoding when JIT is dead. |
| let mayLoad = 1 in |
| def TAILJMPm : I<0xFF, MRM4m, (outs), (ins i32mem_TC:$dst), |
| "jmp{l}\t{*}$dst", [], IIC_JMP_MEM>; |
| } |
| |
| // Conditional tail calls are similar to the above, but they are branches |
| // rather than barriers, and they use EFLAGS. |
| let isCall = 1, isTerminator = 1, isReturn = 1, isBranch = 1, |
| isCodeGenOnly = 1, SchedRW = [WriteJumpLd] in |
| let Uses = [ESP, EFLAGS] in { |
| def TCRETURNdicc : PseudoI<(outs), |
| (ins i32imm_pcrel:$dst, i32imm:$offset, i32imm:$cond), []>; |
| |
| // This gets substituted to a conditional jump instruction in MC lowering. |
| def TAILJMPd_CC : Ii32PCRel<0x80, RawFrm, (outs), |
| (ins i32imm_pcrel:$dst, i32imm:$cond), |
| "", |
| [], IIC_JMP_REL>; |
| } |
| |
| |
| //===----------------------------------------------------------------------===// |
| // Call Instructions... |
| // |
| |
| // RSP is marked as a use to prevent stack-pointer assignments that appear |
| // immediately before calls from potentially appearing dead. Uses for argument |
| // registers are added manually. |
| let isCall = 1, Uses = [RSP], SchedRW = [WriteJump] in { |
| // NOTE: this pattern doesn't match "X86call imm", because we do not know |
| // that the offset between an arbitrary immediate and the call will fit in |
| // the 32-bit pcrel field that we have. |
| def CALL64pcrel32 : Ii32PCRel<0xE8, RawFrm, |
| (outs), (ins i64i32imm_pcrel:$dst), |
| "call{q}\t$dst", [], IIC_CALL_RI>, OpSize32, |
| Requires<[In64BitMode]>; |
| def CALL64r : I<0xFF, MRM2r, (outs), (ins GR64:$dst), |
| "call{q}\t{*}$dst", [(X86call GR64:$dst)], |
| IIC_CALL_RI>, |
| Requires<[In64BitMode]>; |
| def CALL64m : I<0xFF, MRM2m, (outs), (ins i64mem:$dst), |
| "call{q}\t{*}$dst", [(X86call (loadi64 addr:$dst))], |
| IIC_CALL_MEM>, |
| Requires<[In64BitMode,FavorMemIndirectCall]>; |
| |
| def FARCALL64 : RI<0xFF, MRM3m, (outs), (ins opaque80mem:$dst), |
| "lcall{q}\t{*}$dst", [], IIC_CALL_FAR_MEM>; |
| } |
| |
| let isCall = 1, isTerminator = 1, isReturn = 1, isBarrier = 1, |
| isCodeGenOnly = 1, Uses = [RSP], usesCustomInserter = 1, |
| SchedRW = [WriteJump] in { |
| def TCRETURNdi64 : PseudoI<(outs), |
| (ins i64i32imm_pcrel:$dst, i32imm:$offset), |
| []>; |
| def TCRETURNri64 : PseudoI<(outs), |
| (ins ptr_rc_tailcall:$dst, i32imm:$offset), []>, NotMemoryFoldable; |
| let mayLoad = 1 in |
| def TCRETURNmi64 : PseudoI<(outs), |
| (ins i64mem_TC:$dst, i32imm:$offset), []>, NotMemoryFoldable; |
| |
| def TAILJMPd64 : Ii32PCRel<0xE9, RawFrm, (outs), (ins i64i32imm_pcrel:$dst), |
| "jmp\t$dst", [], IIC_JMP_REL>; |
| |
| def TAILJMPr64 : I<0xFF, MRM4r, (outs), (ins ptr_rc_tailcall:$dst), |
| "jmp{q}\t{*}$dst", [], IIC_JMP_MEM>; |
| |
| let mayLoad = 1 in |
| def TAILJMPm64 : I<0xFF, MRM4m, (outs), (ins i64mem_TC:$dst), |
| "jmp{q}\t{*}$dst", [], IIC_JMP_MEM>; |
| |
| // Win64 wants indirect jumps leaving the function to have a REX_W prefix. |
| let hasREX_WPrefix = 1 in { |
| def TAILJMPr64_REX : I<0xFF, MRM4r, (outs), (ins ptr_rc_tailcall:$dst), |
| "rex64 jmp{q}\t{*}$dst", [], IIC_JMP_MEM>; |
| |
| let mayLoad = 1 in |
| def TAILJMPm64_REX : I<0xFF, MRM4m, (outs), (ins i64mem_TC:$dst), |
| "rex64 jmp{q}\t{*}$dst", [], IIC_JMP_MEM>; |
| } |
| } |
| |
| // Conditional tail calls are similar to the above, but they are branches |
| // rather than barriers, and they use EFLAGS. |
| let isCall = 1, isTerminator = 1, isReturn = 1, isBranch = 1, |
| isCodeGenOnly = 1, SchedRW = [WriteJumpLd] in |
| let Uses = [RSP, EFLAGS] in { |
| def TCRETURNdi64cc : PseudoI<(outs), |
| (ins i64i32imm_pcrel:$dst, i32imm:$offset, |
| i32imm:$cond), []>; |
| |
| // This gets substituted to a conditional jump instruction in MC lowering. |
| def TAILJMPd64_CC : Ii32PCRel<0x80, RawFrm, (outs), |
| (ins i64i32imm_pcrel:$dst, i32imm:$cond), |
| "", |
| [], IIC_JMP_REL>; |
| } |