[PowerPC] Add some PPC vec cost tests to prep for D60160 NFC
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358699 91177308-0d34-0410-b5e6-96231b3b80d8
diff --git a/test/Analysis/CostModel/PowerPC/insert_extract.ll b/test/Analysis/CostModel/PowerPC/insert_extract.ll
index 8dc0031..030af67 100644
--- a/test/Analysis/CostModel/PowerPC/insert_extract.ll
+++ b/test/Analysis/CostModel/PowerPC/insert_extract.ll
@@ -1,16 +1,187 @@
-; RUN: opt < %s -cost-model -analyze -mtriple=powerpc64-unknown-linux-gnu -mcpu=pwr7 | FileCheck %s
+; NOTE: Assertions have been autogenerated by utils/update_analyze_test_checks.py
+; RUN: opt < %s -cost-model -analyze -mtriple=powerpc64-unknown-linux-gnu -mcpu=pwr7 -mattr=+vsx | FileCheck --check-prefix=CHECK-P7 %s
+; RUN: opt < %s -cost-model -analyze -mtriple=powerpc64le-unknown-linux-gnu -mcpu=pwr8 -mattr=+vsx | FileCheck --check-prefix=CHECK-P8LE %s
+; RUN: opt < %s -cost-model -analyze -mtriple=powerpc64-unknown-linux-gnu -mcpu=pwr9 -mattr=+vsx | FileCheck --check-prefix=CHECK-P9BE %s
+; RUN: opt < %s -cost-model -analyze -mtriple=powerpc64le-unknown-linux-gnu -mcpu=pwr9 -mattr=+vsx | FileCheck --check-prefix=CHECK-P9LE %s
+
target datalayout = "E-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-f128:128:128-v128:128:128-n32:64"
target triple = "powerpc64-unknown-linux-gnu"
define i32 @insert(i32 %arg) {
; CHECK: cost of 10 {{.*}} insertelement
+; CHECK-P7-LABEL: 'insert'
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 10 for instruction: %x = insertelement <4 x i32> undef, i32 %arg, i32 0
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; CHECK-P8LE-LABEL: 'insert'
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 10 for instruction: %x = insertelement <4 x i32> undef, i32 %arg, i32 0
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; CHECK-P9BE-LABEL: 'insert'
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 11 for instruction: %x = insertelement <4 x i32> undef, i32 %arg, i32 0
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
+; CHECK-P9LE-LABEL: 'insert'
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 11 for instruction: %x = insertelement <4 x i32> undef, i32 %arg, i32 0
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 undef
+;
%x = insertelement <4 x i32> undef, i32 %arg, i32 0
ret i32 undef
}
define i32 @extract(<4 x i32> %arg) {
; CHECK: cost of 3 {{.*}} extractelement
+; CHECK-P7-LABEL: 'extract'
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %x = extractelement <4 x i32> %arg, i32 0
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 %x
+;
+; CHECK-P8LE-LABEL: 'extract'
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %x = extractelement <4 x i32> %arg, i32 0
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 %x
+;
+; CHECK-P9BE-LABEL: 'extract'
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %x = extractelement <4 x i32> %arg, i32 0
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 %x
+;
+; CHECK-P9LE-LABEL: 'extract'
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %x = extractelement <4 x i32> %arg, i32 0
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret i32 %x
+;
%x = extractelement <4 x i32> %arg, i32 0
ret i32 %x
}
+define void @test2xdouble(<2 x double> %arg1) {
+; CHECK-P7-LABEL: 'test2xdouble'
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %v1 = extractelement <2 x double> %arg1, i32 0
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %v2 = extractelement <2 x double> %arg1, i32 1
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+; CHECK-P8LE-LABEL: 'test2xdouble'
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %v1 = extractelement <2 x double> %arg1, i32 0
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %v2 = extractelement <2 x double> %arg1, i32 1
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+; CHECK-P9BE-LABEL: 'test2xdouble'
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %v1 = extractelement <2 x double> %arg1, i32 0
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %v2 = extractelement <2 x double> %arg1, i32 1
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+; CHECK-P9LE-LABEL: 'test2xdouble'
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %v1 = extractelement <2 x double> %arg1, i32 0
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: %v2 = extractelement <2 x double> %arg1, i32 1
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+ %v1 = extractelement <2 x double> %arg1, i32 0
+ %v2 = extractelement <2 x double> %arg1, i32 1
+ ret void
+}
+
+define void @test4xi32(<4 x i32> %v1, i32 %x1) {
+; CHECK-P7-LABEL: 'test4xi32'
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 10 for instruction: %v2 = insertelement <4 x i32> %v1, i32 %x1, i32 2
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+; CHECK-P8LE-LABEL: 'test4xi32'
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 10 for instruction: %v2 = insertelement <4 x i32> %v1, i32 %x1, i32 2
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+; CHECK-P9BE-LABEL: 'test4xi32'
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 11 for instruction: %v2 = insertelement <4 x i32> %v1, i32 %x1, i32 2
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+; CHECK-P9LE-LABEL: 'test4xi32'
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 11 for instruction: %v2 = insertelement <4 x i32> %v1, i32 %x1, i32 2
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+ %v2 = insertelement <4 x i32> %v1, i32 %x1, i32 2
+ ret void
+}
+
+define void @vexti32(<4 x i32> %p1) {
+; CHECK-P7-LABEL: 'vexti32'
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %i1 = extractelement <4 x i32> %p1, i32 0
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %i2 = extractelement <4 x i32> %p1, i32 1
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %i3 = extractelement <4 x i32> %p1, i32 2
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %i4 = extractelement <4 x i32> %p1, i32 3
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+; CHECK-P8LE-LABEL: 'vexti32'
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %i1 = extractelement <4 x i32> %p1, i32 0
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %i2 = extractelement <4 x i32> %p1, i32 1
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %i3 = extractelement <4 x i32> %p1, i32 2
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %i4 = extractelement <4 x i32> %p1, i32 3
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+; CHECK-P9BE-LABEL: 'vexti32'
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %i1 = extractelement <4 x i32> %p1, i32 0
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %i2 = extractelement <4 x i32> %p1, i32 1
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %i3 = extractelement <4 x i32> %p1, i32 2
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %i4 = extractelement <4 x i32> %p1, i32 3
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+; CHECK-P9LE-LABEL: 'vexti32'
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %i1 = extractelement <4 x i32> %p1, i32 0
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %i2 = extractelement <4 x i32> %p1, i32 1
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %i3 = extractelement <4 x i32> %p1, i32 2
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %i4 = extractelement <4 x i32> %p1, i32 3
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+ %i1 = extractelement <4 x i32> %p1, i32 0
+ %i2 = extractelement <4 x i32> %p1, i32 1
+ %i3 = extractelement <4 x i32> %p1, i32 2
+ %i4 = extractelement <4 x i32> %p1, i32 3
+ ret void
+}
+
+define void @vexti64(<2 x i64> %p1) {
+; CHECK-P7-LABEL: 'vexti64'
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %i1 = extractelement <2 x i64> %p1, i32 0
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %i2 = extractelement <2 x i64> %p1, i32 1
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+; CHECK-P8LE-LABEL: 'vexti64'
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %i1 = extractelement <2 x i64> %p1, i32 0
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %i2 = extractelement <2 x i64> %p1, i32 1
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+; CHECK-P9BE-LABEL: 'vexti64'
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %i1 = extractelement <2 x i64> %p1, i32 0
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %i2 = extractelement <2 x i64> %p1, i32 1
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+; CHECK-P9LE-LABEL: 'vexti64'
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %i1 = extractelement <2 x i64> %p1, i32 0
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %i2 = extractelement <2 x i64> %p1, i32 1
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+ %i1 = extractelement <2 x i64> %p1, i32 0
+ %i2 = extractelement <2 x i64> %p1, i32 1
+ ret void
+}
+
+define void @vext(<8 x i16> %p1, <16 x i8> %p2) {
+; CHECK-P7-LABEL: 'vext'
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %i1 = extractelement <8 x i16> %p1, i32 0
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %i2 = extractelement <16 x i8> %p2, i32 0
+; CHECK-P7-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+; CHECK-P8LE-LABEL: 'vext'
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %i1 = extractelement <8 x i16> %p1, i32 0
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %i2 = extractelement <16 x i8> %p2, i32 0
+; CHECK-P8LE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+; CHECK-P9BE-LABEL: 'vext'
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %i1 = extractelement <8 x i16> %p1, i32 0
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %i2 = extractelement <16 x i8> %p2, i32 0
+; CHECK-P9BE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+; CHECK-P9LE-LABEL: 'vext'
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %i1 = extractelement <8 x i16> %p1, i32 0
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %i2 = extractelement <16 x i8> %p2, i32 0
+; CHECK-P9LE-NEXT: Cost Model: Found an estimated cost of 0 for instruction: ret void
+;
+ %i1 = extractelement <8 x i16> %p1, i32 0
+ %i2 = extractelement <16 x i8> %p2, i32 0
+ ret void
+}
diff --git a/test/Analysis/CostModel/PowerPC/p9.ll b/test/Analysis/CostModel/PowerPC/vector_unit.ll
similarity index 73%
rename from test/Analysis/CostModel/PowerPC/p9.ll
rename to test/Analysis/CostModel/PowerPC/vector_unit.ll
index 38ffc07..d90e987 100644
--- a/test/Analysis/CostModel/PowerPC/p9.ll
+++ b/test/Analysis/CostModel/PowerPC/vector_unit.ll
@@ -1,6 +1,5 @@
; RUN: opt < %s -cost-model -analyze -mtriple=powerpc64-unknown-linux-gnu -mcpu=pwr7 -mattr=+vsx | FileCheck %s
; RUN: opt < %s -cost-model -analyze -mtriple=powerpc64-unknown-linux-gnu -mcpu=pwr9 -mattr=+vsx | FileCheck --check-prefix=CHECK-P9 %s
-; RUN: opt < %s -cost-model -analyze -mtriple=powerpc64le-unknown-linux-gnu -mcpu=pwr9 -mattr=+vsx | FileCheck --check-prefix=CHECK-LE %s
define void @testi16(i16 %arg1, i16 %arg2, i16* %arg3) {
@@ -52,17 +51,3 @@
; CHECK-P9: cost of 2 {{.*}} load
; CHECK-P9: cost of 2 {{.*}} store
}
-
-define void @test2xdouble(<2 x double> %arg1) {
- %v1 = extractelement <2 x double> %arg1, i32 0
- %v2 = extractelement <2 x double> %arg1, i32 1
-
- ret void
- ; CHECK: cost of 0 {{.*}} extractelement
- ; CHECK: cost of 1 {{.*}} extractelement
- ; CHECK-P9: cost of 0 {{.*}} extractelement
- ; CHECK-P9: cost of 2 {{.*}} extractelement
- ; CHECK-LE-LABEL: test2xdouble
- ; CHECK-LE: cost of 2 {{.*}} extractelement
- ; CHECK-LE: cost of 0 {{.*}} extractelement
-}
