| # NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py |
| # RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=bdver2 -scheduler-stats -dispatch-stats -iterations=100 -timeline -timeline-max-iterations=1 < %s | FileCheck %s |
| |
| # LLVM-MCA-BEGIN |
| movb %spl, (%rax) |
| movb (%rcx), %bpl |
| movb (%rdx), %sil |
| movb %dil, (%rbx) |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| movw %sp, (%rax) |
| movw (%rcx), %bp |
| movw (%rdx), %si |
| movw %di, (%rbx) |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| movl %esp, (%rax) |
| movl (%rcx), %ebp |
| movl (%rdx), %esi |
| movl %edi, (%rbx) |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| movq %rsp, (%rax) |
| movq (%rcx), %rbp |
| movq (%rdx), %rsi |
| movq %rdi, (%rbx) |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| movd %mm0, (%rax) |
| movd (%rcx), %mm1 |
| movd (%rdx), %mm2 |
| movd %mm3, (%rbx) |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| movaps %xmm0, (%rax) |
| movaps (%rcx), %xmm1 |
| movaps (%rdx), %xmm2 |
| movaps %xmm3, (%rbx) |
| # LLVM-MCA-END |
| |
| # CHECK: [0] Code Region |
| |
| # CHECK: Iterations: 100 |
| # CHECK-NEXT: Instructions: 400 |
| # CHECK-NEXT: Total Cycles: 306 |
| # CHECK-NEXT: Total uOps: 400 |
| |
| # CHECK: Dispatch Width: 4 |
| # CHECK-NEXT: uOps Per Cycle: 1.31 |
| # CHECK-NEXT: IPC: 1.31 |
| # CHECK-NEXT: Block RThroughput: 3.0 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 1.00 * movb %spl, (%rax) |
| # CHECK-NEXT: 1 5 1.00 * movb (%rcx), %bpl |
| # CHECK-NEXT: 1 5 1.00 * movb (%rdx), %sil |
| # CHECK-NEXT: 1 1 1.00 * movb %dil, (%rbx) |
| |
| # CHECK: Dynamic Dispatch Stall Cycles: |
| # CHECK-NEXT: RAT - Register unavailable: 0 |
| # CHECK-NEXT: RCU - Retire tokens unavailable: 0 |
| # CHECK-NEXT: SCHEDQ - Scheduler full: 257 (84.0%) |
| # CHECK-NEXT: LQ - Load queue full: 0 |
| # CHECK-NEXT: SQ - Store queue full: 0 |
| # CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0 |
| |
| # CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched: |
| # CHECK-NEXT: [# dispatched], [# cycles] |
| # CHECK-NEXT: 0, 34 (11.1%) |
| # CHECK-NEXT: 1, 172 (56.2%) |
| # CHECK-NEXT: 2, 86 (28.1%) |
| # CHECK-NEXT: 4, 14 (4.6%) |
| |
| # CHECK: Schedulers - number of cycles where we saw N micro opcodes issued: |
| # CHECK-NEXT: [# issued], [# cycles] |
| # CHECK-NEXT: 0, 5 (1.6%) |
| # CHECK-NEXT: 1, 202 (66.0%) |
| # CHECK-NEXT: 2, 99 (32.4%) |
| |
| # CHECK: Scheduler's queue usage: |
| # CHECK-NEXT: [1] Resource name. |
| # CHECK-NEXT: [2] Average number of used buffer entries. |
| # CHECK-NEXT: [3] Maximum number of used buffer entries. |
| # CHECK-NEXT: [4] Total number of buffer entries. |
| |
| # CHECK: [1] [2] [3] [4] |
| # CHECK-NEXT: PdEX 36 40 40 |
| # CHECK-NEXT: PdFPU 0 0 64 |
| # CHECK-NEXT: PdLoad 19 22 40 |
| # CHECK-NEXT: PdStore 20 23 24 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0.0] - PdAGLU01 |
| # CHECK-NEXT: [0.1] - PdAGLU01 |
| # CHECK-NEXT: [1] - PdBranch |
| # CHECK-NEXT: [2] - PdCount |
| # CHECK-NEXT: [3] - PdDiv |
| # CHECK-NEXT: [4] - PdEX0 |
| # CHECK-NEXT: [5] - PdEX1 |
| # CHECK-NEXT: [6] - PdFPCVT |
| # CHECK-NEXT: [7.0] - PdFPFMA |
| # CHECK-NEXT: [7.1] - PdFPFMA |
| # CHECK-NEXT: [8.0] - PdFPMAL |
| # CHECK-NEXT: [8.1] - PdFPMAL |
| # CHECK-NEXT: [9] - PdFPMMA |
| # CHECK-NEXT: [10] - PdFPSTO |
| # CHECK-NEXT: [11] - PdFPU0 |
| # CHECK-NEXT: [12] - PdFPU1 |
| # CHECK-NEXT: [13] - PdFPU2 |
| # CHECK-NEXT: [14] - PdFPU3 |
| # CHECK-NEXT: [15] - PdFPXBR |
| # CHECK-NEXT: [16.0] - PdLoad |
| # CHECK-NEXT: [16.1] - PdLoad |
| # CHECK-NEXT: [17] - PdMul |
| # CHECK-NEXT: [18] - PdStore |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] |
| # CHECK-NEXT: 3.00 3.00 - - - - - - - - - - - - - - - - - 2.00 2.00 - 2.00 |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions: |
| # CHECK-NEXT: 0.96 0.04 - - - - - - - - - - - - - - - - - - - - 1.00 movb %spl, (%rax) |
| # CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - - 2.00 - - movb (%rcx), %bpl |
| # CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - 2.00 - - - movb (%rdx), %sil |
| # CHECK-NEXT: 0.04 0.96 - - - - - - - - - - - - - - - - - - - - 1.00 movb %dil, (%rbx) |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 0123456789 |
| |
| # CHECK: [0,0] DeER . . movb %spl, (%rax) |
| # CHECK-NEXT: [0,1] DeeeeeER . movb (%rcx), %bpl |
| # CHECK-NEXT: [0,2] D=eeeeeER. movb (%rdx), %sil |
| # CHECK-NEXT: [0,3] D======eER movb %dil, (%rbx) |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 1 1.0 1.0 0.0 movb %spl, (%rax) |
| # CHECK-NEXT: 1. 1 1.0 1.0 0.0 movb (%rcx), %bpl |
| # CHECK-NEXT: 2. 1 2.0 2.0 0.0 movb (%rdx), %sil |
| # CHECK-NEXT: 3. 1 7.0 0.0 0.0 movb %dil, (%rbx) |
| # CHECK-NEXT: 1 2.8 1.0 0.0 <total> |
| |
| # CHECK: [1] Code Region |
| |
| # CHECK: Iterations: 100 |
| # CHECK-NEXT: Instructions: 400 |
| # CHECK-NEXT: Total Cycles: 306 |
| # CHECK-NEXT: Total uOps: 400 |
| |
| # CHECK: Dispatch Width: 4 |
| # CHECK-NEXT: uOps Per Cycle: 1.31 |
| # CHECK-NEXT: IPC: 1.31 |
| # CHECK-NEXT: Block RThroughput: 3.0 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 1.00 * movw %sp, (%rax) |
| # CHECK-NEXT: 1 5 1.00 * movw (%rcx), %bp |
| # CHECK-NEXT: 1 5 1.00 * movw (%rdx), %si |
| # CHECK-NEXT: 1 1 1.00 * movw %di, (%rbx) |
| |
| # CHECK: Dynamic Dispatch Stall Cycles: |
| # CHECK-NEXT: RAT - Register unavailable: 0 |
| # CHECK-NEXT: RCU - Retire tokens unavailable: 0 |
| # CHECK-NEXT: SCHEDQ - Scheduler full: 257 (84.0%) |
| # CHECK-NEXT: LQ - Load queue full: 0 |
| # CHECK-NEXT: SQ - Store queue full: 0 |
| # CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0 |
| |
| # CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched: |
| # CHECK-NEXT: [# dispatched], [# cycles] |
| # CHECK-NEXT: 0, 34 (11.1%) |
| # CHECK-NEXT: 1, 172 (56.2%) |
| # CHECK-NEXT: 2, 86 (28.1%) |
| # CHECK-NEXT: 4, 14 (4.6%) |
| |
| # CHECK: Schedulers - number of cycles where we saw N micro opcodes issued: |
| # CHECK-NEXT: [# issued], [# cycles] |
| # CHECK-NEXT: 0, 5 (1.6%) |
| # CHECK-NEXT: 1, 202 (66.0%) |
| # CHECK-NEXT: 2, 99 (32.4%) |
| |
| # CHECK: Scheduler's queue usage: |
| # CHECK-NEXT: [1] Resource name. |
| # CHECK-NEXT: [2] Average number of used buffer entries. |
| # CHECK-NEXT: [3] Maximum number of used buffer entries. |
| # CHECK-NEXT: [4] Total number of buffer entries. |
| |
| # CHECK: [1] [2] [3] [4] |
| # CHECK-NEXT: PdEX 36 40 40 |
| # CHECK-NEXT: PdFPU 0 0 64 |
| # CHECK-NEXT: PdLoad 19 22 40 |
| # CHECK-NEXT: PdStore 20 23 24 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0.0] - PdAGLU01 |
| # CHECK-NEXT: [0.1] - PdAGLU01 |
| # CHECK-NEXT: [1] - PdBranch |
| # CHECK-NEXT: [2] - PdCount |
| # CHECK-NEXT: [3] - PdDiv |
| # CHECK-NEXT: [4] - PdEX0 |
| # CHECK-NEXT: [5] - PdEX1 |
| # CHECK-NEXT: [6] - PdFPCVT |
| # CHECK-NEXT: [7.0] - PdFPFMA |
| # CHECK-NEXT: [7.1] - PdFPFMA |
| # CHECK-NEXT: [8.0] - PdFPMAL |
| # CHECK-NEXT: [8.1] - PdFPMAL |
| # CHECK-NEXT: [9] - PdFPMMA |
| # CHECK-NEXT: [10] - PdFPSTO |
| # CHECK-NEXT: [11] - PdFPU0 |
| # CHECK-NEXT: [12] - PdFPU1 |
| # CHECK-NEXT: [13] - PdFPU2 |
| # CHECK-NEXT: [14] - PdFPU3 |
| # CHECK-NEXT: [15] - PdFPXBR |
| # CHECK-NEXT: [16.0] - PdLoad |
| # CHECK-NEXT: [16.1] - PdLoad |
| # CHECK-NEXT: [17] - PdMul |
| # CHECK-NEXT: [18] - PdStore |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] |
| # CHECK-NEXT: 3.00 3.00 - - - - - - - - - - - - - - - - - 2.00 2.00 - 2.00 |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions: |
| # CHECK-NEXT: 0.96 0.04 - - - - - - - - - - - - - - - - - - - - 1.00 movw %sp, (%rax) |
| # CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - - 2.00 - - movw (%rcx), %bp |
| # CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - 2.00 - - - movw (%rdx), %si |
| # CHECK-NEXT: 0.04 0.96 - - - - - - - - - - - - - - - - - - - - 1.00 movw %di, (%rbx) |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 0123456789 |
| |
| # CHECK: [0,0] DeER . . movw %sp, (%rax) |
| # CHECK-NEXT: [0,1] DeeeeeER . movw (%rcx), %bp |
| # CHECK-NEXT: [0,2] D=eeeeeER. movw (%rdx), %si |
| # CHECK-NEXT: [0,3] D======eER movw %di, (%rbx) |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 1 1.0 1.0 0.0 movw %sp, (%rax) |
| # CHECK-NEXT: 1. 1 1.0 1.0 0.0 movw (%rcx), %bp |
| # CHECK-NEXT: 2. 1 2.0 2.0 0.0 movw (%rdx), %si |
| # CHECK-NEXT: 3. 1 7.0 0.0 0.0 movw %di, (%rbx) |
| # CHECK-NEXT: 1 2.8 1.0 0.0 <total> |
| |
| # CHECK: [2] Code Region |
| |
| # CHECK: Iterations: 100 |
| # CHECK-NEXT: Instructions: 400 |
| # CHECK-NEXT: Total Cycles: 306 |
| # CHECK-NEXT: Total uOps: 400 |
| |
| # CHECK: Dispatch Width: 4 |
| # CHECK-NEXT: uOps Per Cycle: 1.31 |
| # CHECK-NEXT: IPC: 1.31 |
| # CHECK-NEXT: Block RThroughput: 3.0 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 1.00 * movl %esp, (%rax) |
| # CHECK-NEXT: 1 5 1.00 * movl (%rcx), %ebp |
| # CHECK-NEXT: 1 5 1.00 * movl (%rdx), %esi |
| # CHECK-NEXT: 1 1 1.00 * movl %edi, (%rbx) |
| |
| # CHECK: Dynamic Dispatch Stall Cycles: |
| # CHECK-NEXT: RAT - Register unavailable: 0 |
| # CHECK-NEXT: RCU - Retire tokens unavailable: 0 |
| # CHECK-NEXT: SCHEDQ - Scheduler full: 257 (84.0%) |
| # CHECK-NEXT: LQ - Load queue full: 0 |
| # CHECK-NEXT: SQ - Store queue full: 0 |
| # CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0 |
| |
| # CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched: |
| # CHECK-NEXT: [# dispatched], [# cycles] |
| # CHECK-NEXT: 0, 34 (11.1%) |
| # CHECK-NEXT: 1, 172 (56.2%) |
| # CHECK-NEXT: 2, 86 (28.1%) |
| # CHECK-NEXT: 4, 14 (4.6%) |
| |
| # CHECK: Schedulers - number of cycles where we saw N micro opcodes issued: |
| # CHECK-NEXT: [# issued], [# cycles] |
| # CHECK-NEXT: 0, 5 (1.6%) |
| # CHECK-NEXT: 1, 202 (66.0%) |
| # CHECK-NEXT: 2, 99 (32.4%) |
| |
| # CHECK: Scheduler's queue usage: |
| # CHECK-NEXT: [1] Resource name. |
| # CHECK-NEXT: [2] Average number of used buffer entries. |
| # CHECK-NEXT: [3] Maximum number of used buffer entries. |
| # CHECK-NEXT: [4] Total number of buffer entries. |
| |
| # CHECK: [1] [2] [3] [4] |
| # CHECK-NEXT: PdEX 36 40 40 |
| # CHECK-NEXT: PdFPU 0 0 64 |
| # CHECK-NEXT: PdLoad 19 22 40 |
| # CHECK-NEXT: PdStore 20 23 24 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0.0] - PdAGLU01 |
| # CHECK-NEXT: [0.1] - PdAGLU01 |
| # CHECK-NEXT: [1] - PdBranch |
| # CHECK-NEXT: [2] - PdCount |
| # CHECK-NEXT: [3] - PdDiv |
| # CHECK-NEXT: [4] - PdEX0 |
| # CHECK-NEXT: [5] - PdEX1 |
| # CHECK-NEXT: [6] - PdFPCVT |
| # CHECK-NEXT: [7.0] - PdFPFMA |
| # CHECK-NEXT: [7.1] - PdFPFMA |
| # CHECK-NEXT: [8.0] - PdFPMAL |
| # CHECK-NEXT: [8.1] - PdFPMAL |
| # CHECK-NEXT: [9] - PdFPMMA |
| # CHECK-NEXT: [10] - PdFPSTO |
| # CHECK-NEXT: [11] - PdFPU0 |
| # CHECK-NEXT: [12] - PdFPU1 |
| # CHECK-NEXT: [13] - PdFPU2 |
| # CHECK-NEXT: [14] - PdFPU3 |
| # CHECK-NEXT: [15] - PdFPXBR |
| # CHECK-NEXT: [16.0] - PdLoad |
| # CHECK-NEXT: [16.1] - PdLoad |
| # CHECK-NEXT: [17] - PdMul |
| # CHECK-NEXT: [18] - PdStore |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] |
| # CHECK-NEXT: 3.00 3.00 - - - - - - - - - - - - - - - - - 2.00 2.00 - 2.00 |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions: |
| # CHECK-NEXT: 0.96 0.04 - - - - - - - - - - - - - - - - - - - - 1.00 movl %esp, (%rax) |
| # CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - - 2.00 - - movl (%rcx), %ebp |
| # CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - 2.00 - - - movl (%rdx), %esi |
| # CHECK-NEXT: 0.04 0.96 - - - - - - - - - - - - - - - - - - - - 1.00 movl %edi, (%rbx) |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 0123456789 |
| |
| # CHECK: [0,0] DeER . . movl %esp, (%rax) |
| # CHECK-NEXT: [0,1] DeeeeeER . movl (%rcx), %ebp |
| # CHECK-NEXT: [0,2] D=eeeeeER. movl (%rdx), %esi |
| # CHECK-NEXT: [0,3] D======eER movl %edi, (%rbx) |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 1 1.0 1.0 0.0 movl %esp, (%rax) |
| # CHECK-NEXT: 1. 1 1.0 1.0 0.0 movl (%rcx), %ebp |
| # CHECK-NEXT: 2. 1 2.0 2.0 0.0 movl (%rdx), %esi |
| # CHECK-NEXT: 3. 1 7.0 0.0 0.0 movl %edi, (%rbx) |
| # CHECK-NEXT: 1 2.8 1.0 0.0 <total> |
| |
| # CHECK: [3] Code Region |
| |
| # CHECK: Iterations: 100 |
| # CHECK-NEXT: Instructions: 400 |
| # CHECK-NEXT: Total Cycles: 306 |
| # CHECK-NEXT: Total uOps: 400 |
| |
| # CHECK: Dispatch Width: 4 |
| # CHECK-NEXT: uOps Per Cycle: 1.31 |
| # CHECK-NEXT: IPC: 1.31 |
| # CHECK-NEXT: Block RThroughput: 3.0 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 1.00 * movq %rsp, (%rax) |
| # CHECK-NEXT: 1 5 1.00 * movq (%rcx), %rbp |
| # CHECK-NEXT: 1 5 1.00 * movq (%rdx), %rsi |
| # CHECK-NEXT: 1 1 1.00 * movq %rdi, (%rbx) |
| |
| # CHECK: Dynamic Dispatch Stall Cycles: |
| # CHECK-NEXT: RAT - Register unavailable: 0 |
| # CHECK-NEXT: RCU - Retire tokens unavailable: 0 |
| # CHECK-NEXT: SCHEDQ - Scheduler full: 257 (84.0%) |
| # CHECK-NEXT: LQ - Load queue full: 0 |
| # CHECK-NEXT: SQ - Store queue full: 0 |
| # CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0 |
| |
| # CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched: |
| # CHECK-NEXT: [# dispatched], [# cycles] |
| # CHECK-NEXT: 0, 34 (11.1%) |
| # CHECK-NEXT: 1, 172 (56.2%) |
| # CHECK-NEXT: 2, 86 (28.1%) |
| # CHECK-NEXT: 4, 14 (4.6%) |
| |
| # CHECK: Schedulers - number of cycles where we saw N micro opcodes issued: |
| # CHECK-NEXT: [# issued], [# cycles] |
| # CHECK-NEXT: 0, 5 (1.6%) |
| # CHECK-NEXT: 1, 202 (66.0%) |
| # CHECK-NEXT: 2, 99 (32.4%) |
| |
| # CHECK: Scheduler's queue usage: |
| # CHECK-NEXT: [1] Resource name. |
| # CHECK-NEXT: [2] Average number of used buffer entries. |
| # CHECK-NEXT: [3] Maximum number of used buffer entries. |
| # CHECK-NEXT: [4] Total number of buffer entries. |
| |
| # CHECK: [1] [2] [3] [4] |
| # CHECK-NEXT: PdEX 36 40 40 |
| # CHECK-NEXT: PdFPU 0 0 64 |
| # CHECK-NEXT: PdLoad 19 22 40 |
| # CHECK-NEXT: PdStore 20 23 24 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0.0] - PdAGLU01 |
| # CHECK-NEXT: [0.1] - PdAGLU01 |
| # CHECK-NEXT: [1] - PdBranch |
| # CHECK-NEXT: [2] - PdCount |
| # CHECK-NEXT: [3] - PdDiv |
| # CHECK-NEXT: [4] - PdEX0 |
| # CHECK-NEXT: [5] - PdEX1 |
| # CHECK-NEXT: [6] - PdFPCVT |
| # CHECK-NEXT: [7.0] - PdFPFMA |
| # CHECK-NEXT: [7.1] - PdFPFMA |
| # CHECK-NEXT: [8.0] - PdFPMAL |
| # CHECK-NEXT: [8.1] - PdFPMAL |
| # CHECK-NEXT: [9] - PdFPMMA |
| # CHECK-NEXT: [10] - PdFPSTO |
| # CHECK-NEXT: [11] - PdFPU0 |
| # CHECK-NEXT: [12] - PdFPU1 |
| # CHECK-NEXT: [13] - PdFPU2 |
| # CHECK-NEXT: [14] - PdFPU3 |
| # CHECK-NEXT: [15] - PdFPXBR |
| # CHECK-NEXT: [16.0] - PdLoad |
| # CHECK-NEXT: [16.1] - PdLoad |
| # CHECK-NEXT: [17] - PdMul |
| # CHECK-NEXT: [18] - PdStore |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] |
| # CHECK-NEXT: 3.00 3.00 - - - - - - - - - - - - - - - - - 2.00 2.00 - 2.00 |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions: |
| # CHECK-NEXT: 0.96 0.04 - - - - - - - - - - - - - - - - - - - - 1.00 movq %rsp, (%rax) |
| # CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - - 2.00 - - movq (%rcx), %rbp |
| # CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - 2.00 - - - movq (%rdx), %rsi |
| # CHECK-NEXT: 0.04 0.96 - - - - - - - - - - - - - - - - - - - - 1.00 movq %rdi, (%rbx) |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 0123456789 |
| |
| # CHECK: [0,0] DeER . . movq %rsp, (%rax) |
| # CHECK-NEXT: [0,1] DeeeeeER . movq (%rcx), %rbp |
| # CHECK-NEXT: [0,2] D=eeeeeER. movq (%rdx), %rsi |
| # CHECK-NEXT: [0,3] D======eER movq %rdi, (%rbx) |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 1 1.0 1.0 0.0 movq %rsp, (%rax) |
| # CHECK-NEXT: 1. 1 1.0 1.0 0.0 movq (%rcx), %rbp |
| # CHECK-NEXT: 2. 1 2.0 2.0 0.0 movq (%rdx), %rsi |
| # CHECK-NEXT: 3. 1 7.0 0.0 0.0 movq %rdi, (%rbx) |
| # CHECK-NEXT: 1 2.8 1.0 0.0 <total> |
| |
| # CHECK: [4] Code Region |
| |
| # CHECK: Iterations: 100 |
| # CHECK-NEXT: Instructions: 400 |
| # CHECK-NEXT: Total Cycles: 554 |
| # CHECK-NEXT: Total uOps: 400 |
| |
| # CHECK: Dispatch Width: 4 |
| # CHECK-NEXT: uOps Per Cycle: 0.72 |
| # CHECK-NEXT: IPC: 0.72 |
| # CHECK-NEXT: Block RThroughput: 4.0 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 2 1.50 * U movd %mm0, (%rax) |
| # CHECK-NEXT: 1 5 1.50 * movd (%rcx), %mm1 |
| # CHECK-NEXT: 1 5 1.50 * movd (%rdx), %mm2 |
| # CHECK-NEXT: 1 2 1.50 * U movd %mm3, (%rbx) |
| |
| # CHECK: Dynamic Dispatch Stall Cycles: |
| # CHECK-NEXT: RAT - Register unavailable: 0 |
| # CHECK-NEXT: RCU - Retire tokens unavailable: 0 |
| # CHECK-NEXT: SCHEDQ - Scheduler full: 55 (9.9%) |
| # CHECK-NEXT: LQ - Load queue full: 0 |
| # CHECK-NEXT: SQ - Store queue full: 437 (78.9%) |
| # CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0 |
| |
| # CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched: |
| # CHECK-NEXT: [# dispatched], [# cycles] |
| # CHECK-NEXT: 0, 365 (65.9%) |
| # CHECK-NEXT: 1, 88 (15.9%) |
| # CHECK-NEXT: 2, 3 (0.5%) |
| # CHECK-NEXT: 3, 86 (15.5%) |
| # CHECK-NEXT: 4, 12 (2.2%) |
| |
| # CHECK: Schedulers - number of cycles where we saw N micro opcodes issued: |
| # CHECK-NEXT: [# issued], [# cycles] |
| # CHECK-NEXT: 0, 253 (45.7%) |
| # CHECK-NEXT: 1, 202 (36.5%) |
| # CHECK-NEXT: 2, 99 (17.9%) |
| |
| # CHECK: Scheduler's queue usage: |
| # CHECK-NEXT: [1] Resource name. |
| # CHECK-NEXT: [2] Average number of used buffer entries. |
| # CHECK-NEXT: [3] Maximum number of used buffer entries. |
| # CHECK-NEXT: [4] Total number of buffer entries. |
| |
| # CHECK: [1] [2] [3] [4] |
| # CHECK-NEXT: PdEX 23 40 40 |
| # CHECK-NEXT: PdFPU 23 40 64 |
| # CHECK-NEXT: PdLoad 3 22 40 |
| # CHECK-NEXT: PdStore 22 24 24 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0.0] - PdAGLU01 |
| # CHECK-NEXT: [0.1] - PdAGLU01 |
| # CHECK-NEXT: [1] - PdBranch |
| # CHECK-NEXT: [2] - PdCount |
| # CHECK-NEXT: [3] - PdDiv |
| # CHECK-NEXT: [4] - PdEX0 |
| # CHECK-NEXT: [5] - PdEX1 |
| # CHECK-NEXT: [6] - PdFPCVT |
| # CHECK-NEXT: [7.0] - PdFPFMA |
| # CHECK-NEXT: [7.1] - PdFPFMA |
| # CHECK-NEXT: [8.0] - PdFPMAL |
| # CHECK-NEXT: [8.1] - PdFPMAL |
| # CHECK-NEXT: [9] - PdFPMMA |
| # CHECK-NEXT: [10] - PdFPSTO |
| # CHECK-NEXT: [11] - PdFPU0 |
| # CHECK-NEXT: [12] - PdFPU1 |
| # CHECK-NEXT: [13] - PdFPU2 |
| # CHECK-NEXT: [14] - PdFPU3 |
| # CHECK-NEXT: [15] - PdFPXBR |
| # CHECK-NEXT: [16.0] - PdLoad |
| # CHECK-NEXT: [16.1] - PdLoad |
| # CHECK-NEXT: [17] - PdMul |
| # CHECK-NEXT: [18] - PdStore |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] |
| # CHECK-NEXT: 4.00 4.00 - - - - - - - - 3.00 3.00 - 2.00 1.00 1.00 3.00 3.00 - 3.00 3.00 - 2.00 |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions: |
| # CHECK-NEXT: - 1.00 - - - - - - - - - - - 1.00 - - - 3.00 - - - - 1.00 movd %mm0, (%rax) |
| # CHECK-NEXT: 1.53 1.47 - - - - - - - - - 3.00 - - - 1.00 - - - - 3.00 - - movd (%rcx), %mm1 |
| # CHECK-NEXT: 1.47 1.53 - - - - - - - - 3.00 - - - 1.00 - - - - 3.00 - - - movd (%rdx), %mm2 |
| # CHECK-NEXT: 1.00 - - - - - - - - - - - - 1.00 - - 3.00 - - - - - 1.00 movd %mm3, (%rbx) |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: 0 |
| # CHECK-NEXT: Index 0123456789 |
| |
| # CHECK: [0,0] DeeER. . movd %mm0, (%rax) |
| # CHECK-NEXT: [0,1] DeeeeeER . movd (%rcx), %mm1 |
| # CHECK-NEXT: [0,2] D=eeeeeER . movd (%rdx), %mm2 |
| # CHECK-NEXT: [0,3] D======eeER movd %mm3, (%rbx) |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 1 1.0 1.0 0.0 movd %mm0, (%rax) |
| # CHECK-NEXT: 1. 1 1.0 1.0 0.0 movd (%rcx), %mm1 |
| # CHECK-NEXT: 2. 1 2.0 2.0 0.0 movd (%rdx), %mm2 |
| # CHECK-NEXT: 3. 1 7.0 0.0 0.0 movd %mm3, (%rbx) |
| # CHECK-NEXT: 1 2.8 1.0 0.0 <total> |
| |
| # CHECK: [5] Code Region |
| |
| # CHECK: Iterations: 100 |
| # CHECK-NEXT: Instructions: 400 |
| # CHECK-NEXT: Total Cycles: 405 |
| # CHECK-NEXT: Total uOps: 400 |
| |
| # CHECK: Dispatch Width: 4 |
| # CHECK-NEXT: uOps Per Cycle: 0.99 |
| # CHECK-NEXT: IPC: 0.99 |
| # CHECK-NEXT: Block RThroughput: 4.0 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 1 1.50 * movaps %xmm0, (%rax) |
| # CHECK-NEXT: 1 5 1.50 * movaps (%rcx), %xmm1 |
| # CHECK-NEXT: 1 5 1.50 * movaps (%rdx), %xmm2 |
| # CHECK-NEXT: 1 1 1.50 * movaps %xmm3, (%rbx) |
| |
| # CHECK: Dynamic Dispatch Stall Cycles: |
| # CHECK-NEXT: RAT - Register unavailable: 0 |
| # CHECK-NEXT: RCU - Retire tokens unavailable: 0 |
| # CHECK-NEXT: SCHEDQ - Scheduler full: 347 (85.7%) |
| # CHECK-NEXT: LQ - Load queue full: 0 |
| # CHECK-NEXT: SQ - Store queue full: 0 |
| # CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0 |
| |
| # CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched: |
| # CHECK-NEXT: [# dispatched], [# cycles] |
| # CHECK-NEXT: 0, 131 (32.3%) |
| # CHECK-NEXT: 1, 174 (43.0%) |
| # CHECK-NEXT: 2, 87 (21.5%) |
| # CHECK-NEXT: 4, 13 (3.2%) |
| |
| # CHECK: Schedulers - number of cycles where we saw N micro opcodes issued: |
| # CHECK-NEXT: [# issued], [# cycles] |
| # CHECK-NEXT: 0, 104 (25.7%) |
| # CHECK-NEXT: 1, 202 (49.9%) |
| # CHECK-NEXT: 2, 99 (24.4%) |
| |
| # CHECK: Scheduler's queue usage: |
| # CHECK-NEXT: [1] Resource name. |
| # CHECK-NEXT: [2] Average number of used buffer entries. |
| # CHECK-NEXT: [3] Maximum number of used buffer entries. |
| # CHECK-NEXT: [4] Total number of buffer entries. |
| |
| # CHECK: [1] [2] [3] [4] |
| # CHECK-NEXT: PdEX 37 40 40 |
| # CHECK-NEXT: PdFPU 37 40 64 |
| # CHECK-NEXT: PdLoad 19 22 40 |
| # CHECK-NEXT: PdStore 20 22 24 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0.0] - PdAGLU01 |
| # CHECK-NEXT: [0.1] - PdAGLU01 |
| # CHECK-NEXT: [1] - PdBranch |
| # CHECK-NEXT: [2] - PdCount |
| # CHECK-NEXT: [3] - PdDiv |
| # CHECK-NEXT: [4] - PdEX0 |
| # CHECK-NEXT: [5] - PdEX1 |
| # CHECK-NEXT: [6] - PdFPCVT |
| # CHECK-NEXT: [7.0] - PdFPFMA |
| # CHECK-NEXT: [7.1] - PdFPFMA |
| # CHECK-NEXT: [8.0] - PdFPMAL |
| # CHECK-NEXT: [8.1] - PdFPMAL |
| # CHECK-NEXT: [9] - PdFPMMA |
| # CHECK-NEXT: [10] - PdFPSTO |
| # CHECK-NEXT: [11] - PdFPU0 |
| # CHECK-NEXT: [12] - PdFPU1 |
| # CHECK-NEXT: [13] - PdFPU2 |
| # CHECK-NEXT: [14] - PdFPU3 |
| # CHECK-NEXT: [15] - PdFPXBR |
| # CHECK-NEXT: [16.0] - PdLoad |
| # CHECK-NEXT: [16.1] - PdLoad |
| # CHECK-NEXT: [17] - PdMul |
| # CHECK-NEXT: [18] - PdStore |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] |
| # CHECK-NEXT: 4.00 4.00 - - - - - - 3.00 3.00 - - - 2.00 1.00 1.00 3.00 3.00 - 3.00 3.00 - 2.00 |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions: |
| # CHECK-NEXT: - 1.00 - - - - - - - - - - - 1.00 - - - 3.00 - - - - 1.00 movaps %xmm0, (%rax) |
| # CHECK-NEXT: 3.00 - - - - - - - - 3.00 - - - - - 1.00 - - - - 3.00 - - movaps (%rcx), %xmm1 |
| # CHECK-NEXT: - 3.00 - - - - - - 3.00 - - - - - 1.00 - - - - 3.00 - - - movaps (%rdx), %xmm2 |
| # CHECK-NEXT: 1.00 - - - - - - - - - - - - 1.00 - - 3.00 - - - - - 1.00 movaps %xmm3, (%rbx) |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 0123456789 |
| |
| # CHECK: [0,0] DeER . . movaps %xmm0, (%rax) |
| # CHECK-NEXT: [0,1] DeeeeeER . movaps (%rcx), %xmm1 |
| # CHECK-NEXT: [0,2] D=eeeeeER. movaps (%rdx), %xmm2 |
| # CHECK-NEXT: [0,3] D======eER movaps %xmm3, (%rbx) |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 1 1.0 1.0 0.0 movaps %xmm0, (%rax) |
| # CHECK-NEXT: 1. 1 1.0 1.0 0.0 movaps (%rcx), %xmm1 |
| # CHECK-NEXT: 2. 1 2.0 2.0 0.0 movaps (%rdx), %xmm2 |
| # CHECK-NEXT: 3. 1 7.0 0.0 0.0 movaps %xmm3, (%rbx) |
| # CHECK-NEXT: 1 2.8 1.0 0.0 <total> |
