| # RUN: llvm-mc --disassemble %s -triple=x86_64 | FileCheck %s |
| |
| # CHECK: rep insb %dx, %es:(%rdi) |
| 0xf3 0x6c #rep ins |
| # CHECK: rep insl %dx, %es:(%rdi) |
| 0xf3 0x6d #rep ins |
| # CHECK: rep movsb (%rsi), %es:(%rdi) |
| 0xf3 0xa4 #rep movs |
| # CHECK: rep movsl (%rsi), %es:(%rdi) |
| 0xf3 0xa5 #rep movs |
| # CHECK: rep outsb (%rsi), %dx |
| 0xf3 0x6e #rep outs |
| # CHECK: rep outsl (%rsi), %dx |
| 0xf3 0x6f #rep outs |
| # CHECK: rep lodsb (%rsi), %al |
| 0xf3 0xac #rep lods |
| # CHECK: rep lodsl (%rsi), %eax |
| 0xf3 0xad #rep lods |
| # CHECK: rep stosb %al, %es:(%rdi) |
| 0xf3 0xaa #rep stos |
| # CHECK: rep stosl %eax, %es:(%rdi) |
| 0xf3 0xab #rep stos |
| # CHECK: rep cmpsb %es:(%rdi), (%rsi) |
| 0xf3 0xa6 #rep cmps |
| # CHECK: rep cmpsl %es:(%rdi), (%rsi) |
| 0xf3 0xa7 #repe cmps |
| # CHECK: rep scasb %es:(%rdi), %al |
| 0xf3 0xae #repe scas |
| # CHECK: rep scasl %es:(%rdi), %eax |
| 0xf3 0xaf #repe scas |
| # CHECK: repne cmpsb %es:(%rdi), (%rsi) |
| 0xf2 0xa6 #repne cmps |
| # CHECK: repne cmpsl %es:(%rdi), (%rsi) |
| 0xf2 0xa7 #repne cmps |
| # CHECK: repne scasb %es:(%rdi), %al |
| 0xf2 0xae #repne scas |
| # CHECK: repne scasl %es:(%rdi), %eax |
| 0xf2 0xaf #repne scas |
| |
| # CHECK: repne scasw %es:(%rdi), %ax |
| # CHECK: repne scasw %es:(%rdi), %ax |
| 0x66 0xF2 0xAF 0xF2 0x66 0xAF |
| |
| # CHECK: lock |
| # CHECK-NEXT: orl $16, %fs:776 |
| 0xf0 0x64 0x83 0x0c 0x25 0x08 0x03 0x00 0x00 0x10 |
| |
| # CHECK: movq %fs:768, %rdi |
| 0x64 0x48 0x8b 0x3c 0x25 0x00 0x03 0x00 0x00 |
| |
| # CHECK: rep stosq %rax, %es:(%rdi) |
| 0xf3 0x48 0xab |
| |
| # CHECK: rep stosq %rax, %es:(%edi) |
| 0xf3 0x67 0x48 0xab |
| |
| # CHECK: movl 32(%rbp), %eax |
| 0x8b 0x45 0x20 |
| |
| # CHECK: movl %es:32(%rbp), %eax |
| 0x26 0x8b 0x45 0x20 |
| |
| # CHECK: movl %es:32(%rbp), %eax |
| 0x2e 0x26 0x8b 0x45 0x20 |
| |
| # Test that multiple prefixes stack. |
| # (todo- the correct disassembly is actually more like "es movl %cs:32(%rbp), %eax" |
| # but we don't support that) |
| # CHECK: movl %cs:32(%rbp), %eax |
| 0x26 0x2e 0x8b 0x45 0x20 |
| |
| # Test that 0xf3 as part of the opcode works. |
| # CHECK: cvtdq2pd (%rax), %xmm0 |
| 0xf3 0x0f 0xe6 0x00 |
| |
| # CHECK: pause |
| 0xf3 0x90 |
| |
| # CHECK: nop |
| 0x90 |
| |
| # CHECK: lock |
| # CHECK-NEXT: nop |
| 0xf0 0x90 |
| |
| # Test that immediate is printed correctly within opsize prefix |
| # CHECK: addw $-12, %ax |
| 0x66,0x83,0xc0,0xf4 |
| |
| # Test that multiple redundant prefixes work (redundant, but valid x86). |
| # CHECK: rep stosq |
| 0xf3 0xf3 0x48 0xab |
| |
| # Test that we can disassembler control registers above CR8 |
| # CHECK: movq %cr15, %rax |
| 0x44 0x0f 0x20 0xf8 |
| # CHECK: movq %dr15, %rax |
| 0x44 0x0f 0x21 0xf8 |
| |
| # Test that MMX ignore REX.R and REX.B. |
| # CHECK: movq %mm0, %mm1 |
| 0x46 0x0f 0x7f 0xc1 |
| |
| # Test that lock prefix is not dropped if it's not the first prefix |
| # CHECK: lock cmpxchgw %di, (%rcx) |
| 0x66 0xf0 0x0f 0xb1 0x39 |
| |
| # Test that a prefix on it's own works. It's debatable as to if this is |
| # something that is considered valid, but however as LLVM's own disassembler |
| # has decided to disassemble prefixes as being separate opcodes, it therefore |
| # should be capable of re-consuming it's own output. |
| # CHECK: rep |
| 0xf3 |
| # ***IMPORTANT ^-- this must be at the end of the file to be a valid test *** |
