| ; RUN: llc %s -o - -mattr=+avx | FileCheck %s |
| target datalayout = "e-m:o-i64:64-f80:128-n8:16:32:64-S128" |
| target triple = "x86_64-apple-macosx" |
| |
| ; For this test we used to optimize the <i1 true, i1 false, i1 false, i1 true> |
| ; mask into <i32 2147483648, i32 0, i32 0, i32 2147483648> because we thought |
| ; we would lower that into a blend where only the high bit is relevant. |
| ; However, since the whole mask is constant, this is simplified incorrectly |
| ; by the generic code, because it was expecting -1 in place of 2147483648. |
| ; |
| ; The problem does not occur without AVX, because vselect of v4i32 is not legal |
| ; nor custom. |
| ; |
| ; <rdar://problem/18675020> |
| |
| ; CHECK-LABEL: test: |
| ; CHECK: vmovdqa {{.*#+}} xmm1 = [65533,124,125,14807] |
| ; CHECK: vmovdqa {{.*#+}} xmm1 = [65535,0,0,65535] |
| ; CHECK: ret |
| define void @test(<4 x i16>* %a, <4 x i16>* %b) { |
| body: |
| %predphi = select <4 x i1> <i1 true, i1 false, i1 false, i1 true>, <4 x i16> <i16 -3, i16 545, i16 4385, i16 14807>, <4 x i16> <i16 123, i16 124, i16 125, i16 127> |
| %predphi42 = select <4 x i1> <i1 true, i1 false, i1 false, i1 true>, <4 x i16> <i16 -1, i16 -1, i16 -1, i16 -1>, <4 x i16> zeroinitializer |
| store <4 x i16> %predphi, <4 x i16>* %a, align 8 |
| store <4 x i16> %predphi42, <4 x i16>* %b, align 8 |
| ret void |
| } |
| |
| ; Improve code coverage. |
| ; |
| ; When shrinking the condition used into the select to match a blend, this |
| ; test case exercises the path where the modified node is not the root |
| ; of the condition. |
| ; |
| ; CHECK-LABEL: test2: |
| ; CHECK: vpslld $31, %xmm0, %xmm0 |
| ; CHECK-NEXT: vpsrad $31, %xmm0, %xmm0 |
| ; CHECK-NEXT: vpmovsxdq %xmm0, %xmm1 |
| ; CHECK-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[2,3,0,1] |
| ; CHECK-NEXT: vpmovsxdq %xmm0, %xmm0 |
| ; CHECK-NEXT: vinsertf128 $1, %xmm0, %ymm1, [[MASK:%ymm[0-9]+]] |
| ; CHECK: vblendvpd [[MASK]] |
| ; CHECK: retq |
| define void @test2(double** %call1559, i64 %indvars.iv4198, <4 x i1> %tmp1895) { |
| bb: |
| %arrayidx1928 = getelementptr inbounds double*, double** %call1559, i64 %indvars.iv4198 |
| %tmp1888 = load double*, double** %arrayidx1928, align 8 |
| %predphi.v.v = select <4 x i1> %tmp1895, <4 x double> <double -5.000000e-01, double -5.000000e-01, double -5.000000e-01, double -5.000000e-01>, <4 x double> <double 5.000000e-01, double 5.000000e-01, double 5.000000e-01, double 5.000000e-01> |
| %tmp1900 = bitcast double* %tmp1888 to <4 x double>* |
| store <4 x double> %predphi.v.v, <4 x double>* %tmp1900, align 8 |
| ret void |
| } |
| |
| ; For this test, we used to optimized the conditional mask for the blend, i.e., |
| ; we shrunk some of its bits. |
| ; However, this same mask was used in another select (%predphi31) that turned out |
| ; to be optimized into a and. In that case, the conditional mask was wrong. |
| ; |
| ; Make sure that the and is fed by the original mask. |
| ; |
| ; <rdar://problem/18819506> |
| |
| ; CHECK-LABEL: test3: |
| ; Compute the mask. |
| ; CHECK: vpcmpeqd {{%xmm[0-9]+}}, {{%xmm[0-9]+}}, [[MASK:%xmm[0-9]+]] |
| ; Do not shrink the bit of the mask. |
| ; CHECK-NOT: vpslld $31, [[MASK]], {{%xmm[0-9]+}} |
| ; Use the mask in the blend. |
| ; CHECK-NEXT: vblendvps [[MASK]], %xmm{{[0-9]+}}, %xmm{{[0-9]+}}, %xmm{{[0-9]+}} |
| ; Use the mask in the and. |
| ; CHECK-NEXT: vpand LCPI2_2(%rip), [[MASK]], {{%xmm[0-9]+}} |
| ; CHECK: retq |
| define void @test3(<4 x i32> %induction30, <4 x i16>* %tmp16, <4 x i16>* %tmp17, <4 x i16> %tmp3, <4 x i16> %tmp12) { |
| %tmp6 = srem <4 x i32> %induction30, <i32 3, i32 3, i32 3, i32 3> |
| %tmp7 = icmp eq <4 x i32> %tmp6, zeroinitializer |
| %predphi = select <4 x i1> %tmp7, <4 x i16> %tmp3, <4 x i16> %tmp12 |
| %predphi31 = select <4 x i1> %tmp7, <4 x i16> <i16 -1, i16 -1, i16 -1, i16 -1>, <4 x i16> zeroinitializer |
| |
| store <4 x i16> %predphi31, <4 x i16>* %tmp16, align 8 |
| store <4 x i16> %predphi, <4 x i16>* %tmp17, align 8 |
| ret void |
| } |
| |
| ; We shouldn't try to lower this directly using VSELECT because we don't have |
| ; vpblendvb in AVX1, only in AVX2. Instead, it should be expanded. |
| ; |
| ; CHECK-LABEL: PR22706: |
| ; CHECK: vpcmpgtb |
| ; CHECK: vpcmpgtb |
| define <32 x i8> @PR22706(<32 x i1> %x) { |
| %tmp = select <32 x i1> %x, <32 x i8> <i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1, i8 1>, <32 x i8> <i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2, i8 2> |
| ret <32 x i8> %tmp |
| } |