| //===-- SystemZFrameLowering.cpp - Frame lowering for SystemZ -------------===// |
| // |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. |
| // See https://llvm.org/LICENSE.txt for license information. |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #include "SystemZFrameLowering.h" |
| #include "SystemZCallingConv.h" |
| #include "SystemZInstrBuilder.h" |
| #include "SystemZInstrInfo.h" |
| #include "SystemZMachineFunctionInfo.h" |
| #include "SystemZRegisterInfo.h" |
| #include "SystemZSubtarget.h" |
| #include "llvm/CodeGen/MachineModuleInfo.h" |
| #include "llvm/CodeGen/MachineRegisterInfo.h" |
| #include "llvm/CodeGen/RegisterScavenging.h" |
| #include "llvm/IR/Function.h" |
| |
| using namespace llvm; |
| |
| namespace { |
| // The ABI-defined register save slots, relative to the incoming stack |
| // pointer. |
| static const TargetFrameLowering::SpillSlot SpillOffsetTable[] = { |
| { SystemZ::R2D, 0x10 }, |
| { SystemZ::R3D, 0x18 }, |
| { SystemZ::R4D, 0x20 }, |
| { SystemZ::R5D, 0x28 }, |
| { SystemZ::R6D, 0x30 }, |
| { SystemZ::R7D, 0x38 }, |
| { SystemZ::R8D, 0x40 }, |
| { SystemZ::R9D, 0x48 }, |
| { SystemZ::R10D, 0x50 }, |
| { SystemZ::R11D, 0x58 }, |
| { SystemZ::R12D, 0x60 }, |
| { SystemZ::R13D, 0x68 }, |
| { SystemZ::R14D, 0x70 }, |
| { SystemZ::R15D, 0x78 }, |
| { SystemZ::F0D, 0x80 }, |
| { SystemZ::F2D, 0x88 }, |
| { SystemZ::F4D, 0x90 }, |
| { SystemZ::F6D, 0x98 } |
| }; |
| } // end anonymous namespace |
| |
| SystemZFrameLowering::SystemZFrameLowering() |
| : TargetFrameLowering(TargetFrameLowering::StackGrowsDown, 8, |
| -SystemZMC::CallFrameSize, 8, |
| false /* StackRealignable */) { |
| // Create a mapping from register number to save slot offset. |
| RegSpillOffsets.grow(SystemZ::NUM_TARGET_REGS); |
| for (unsigned I = 0, E = array_lengthof(SpillOffsetTable); I != E; ++I) |
| RegSpillOffsets[SpillOffsetTable[I].Reg] = SpillOffsetTable[I].Offset; |
| } |
| |
| const TargetFrameLowering::SpillSlot * |
| SystemZFrameLowering::getCalleeSavedSpillSlots(unsigned &NumEntries) const { |
| NumEntries = array_lengthof(SpillOffsetTable); |
| return SpillOffsetTable; |
| } |
| |
| void SystemZFrameLowering::determineCalleeSaves(MachineFunction &MF, |
| BitVector &SavedRegs, |
| RegScavenger *RS) const { |
| TargetFrameLowering::determineCalleeSaves(MF, SavedRegs, RS); |
| |
| MachineFrameInfo &MFFrame = MF.getFrameInfo(); |
| const TargetRegisterInfo *TRI = MF.getSubtarget().getRegisterInfo(); |
| bool HasFP = hasFP(MF); |
| SystemZMachineFunctionInfo *MFI = MF.getInfo<SystemZMachineFunctionInfo>(); |
| bool IsVarArg = MF.getFunction().isVarArg(); |
| |
| // va_start stores incoming FPR varargs in the normal way, but delegates |
| // the saving of incoming GPR varargs to spillCalleeSavedRegisters(). |
| // Record these pending uses, which typically include the call-saved |
| // argument register R6D. |
| if (IsVarArg) |
| for (unsigned I = MFI->getVarArgsFirstGPR(); I < SystemZ::NumArgGPRs; ++I) |
| SavedRegs.set(SystemZ::ArgGPRs[I]); |
| |
| // If there are any landing pads, entering them will modify r6/r7. |
| if (!MF.getLandingPads().empty()) { |
| SavedRegs.set(SystemZ::R6D); |
| SavedRegs.set(SystemZ::R7D); |
| } |
| |
| // If the function requires a frame pointer, record that the hard |
| // frame pointer will be clobbered. |
| if (HasFP) |
| SavedRegs.set(SystemZ::R11D); |
| |
| // If the function calls other functions, record that the return |
| // address register will be clobbered. |
| if (MFFrame.hasCalls()) |
| SavedRegs.set(SystemZ::R14D); |
| |
| // If we are saving GPRs other than the stack pointer, we might as well |
| // save and restore the stack pointer at the same time, via STMG and LMG. |
| // This allows the deallocation to be done by the LMG, rather than needing |
| // a separate %r15 addition. |
| const MCPhysReg *CSRegs = TRI->getCalleeSavedRegs(&MF); |
| for (unsigned I = 0; CSRegs[I]; ++I) { |
| unsigned Reg = CSRegs[I]; |
| if (SystemZ::GR64BitRegClass.contains(Reg) && SavedRegs.test(Reg)) { |
| SavedRegs.set(SystemZ::R15D); |
| break; |
| } |
| } |
| } |
| |
| // Add GPR64 to the save instruction being built by MIB, which is in basic |
| // block MBB. IsImplicit says whether this is an explicit operand to the |
| // instruction, or an implicit one that comes between the explicit start |
| // and end registers. |
| static void addSavedGPR(MachineBasicBlock &MBB, MachineInstrBuilder &MIB, |
| unsigned GPR64, bool IsImplicit) { |
| const TargetRegisterInfo *RI = |
| MBB.getParent()->getSubtarget().getRegisterInfo(); |
| unsigned GPR32 = RI->getSubReg(GPR64, SystemZ::subreg_l32); |
| bool IsLive = MBB.isLiveIn(GPR64) || MBB.isLiveIn(GPR32); |
| if (!IsLive || !IsImplicit) { |
| MIB.addReg(GPR64, getImplRegState(IsImplicit) | getKillRegState(!IsLive)); |
| if (!IsLive) |
| MBB.addLiveIn(GPR64); |
| } |
| } |
| |
| bool SystemZFrameLowering:: |
| spillCalleeSavedRegisters(MachineBasicBlock &MBB, |
| MachineBasicBlock::iterator MBBI, |
| const std::vector<CalleeSavedInfo> &CSI, |
| const TargetRegisterInfo *TRI) const { |
| if (CSI.empty()) |
| return false; |
| |
| MachineFunction &MF = *MBB.getParent(); |
| const TargetInstrInfo *TII = MF.getSubtarget().getInstrInfo(); |
| SystemZMachineFunctionInfo *ZFI = MF.getInfo<SystemZMachineFunctionInfo>(); |
| bool IsVarArg = MF.getFunction().isVarArg(); |
| DebugLoc DL; |
| |
| // Scan the call-saved GPRs and find the bounds of the register spill area. |
| unsigned LowGPR = 0; |
| unsigned HighGPR = SystemZ::R15D; |
| unsigned StartOffset = -1U; |
| for (unsigned I = 0, E = CSI.size(); I != E; ++I) { |
| unsigned Reg = CSI[I].getReg(); |
| if (SystemZ::GR64BitRegClass.contains(Reg)) { |
| unsigned Offset = RegSpillOffsets[Reg]; |
| assert(Offset && "Unexpected GPR save"); |
| if (StartOffset > Offset) { |
| LowGPR = Reg; |
| StartOffset = Offset; |
| } |
| } |
| } |
| |
| // Save the range of call-saved registers, for use by the epilogue inserter. |
| ZFI->setLowSavedGPR(LowGPR); |
| ZFI->setHighSavedGPR(HighGPR); |
| |
| // Include the GPR varargs, if any. R6D is call-saved, so would |
| // be included by the loop above, but we also need to handle the |
| // call-clobbered argument registers. |
| if (IsVarArg) { |
| unsigned FirstGPR = ZFI->getVarArgsFirstGPR(); |
| if (FirstGPR < SystemZ::NumArgGPRs) { |
| unsigned Reg = SystemZ::ArgGPRs[FirstGPR]; |
| unsigned Offset = RegSpillOffsets[Reg]; |
| if (StartOffset > Offset) { |
| LowGPR = Reg; StartOffset = Offset; |
| } |
| } |
| } |
| |
| // Save GPRs |
| if (LowGPR) { |
| assert(LowGPR != HighGPR && "Should be saving %r15 and something else"); |
| |
| // Build an STMG instruction. |
| MachineInstrBuilder MIB = BuildMI(MBB, MBBI, DL, TII->get(SystemZ::STMG)); |
| |
| // Add the explicit register operands. |
| addSavedGPR(MBB, MIB, LowGPR, false); |
| addSavedGPR(MBB, MIB, HighGPR, false); |
| |
| // Add the address. |
| MIB.addReg(SystemZ::R15D).addImm(StartOffset); |
| |
| // Make sure all call-saved GPRs are included as operands and are |
| // marked as live on entry. |
| for (unsigned I = 0, E = CSI.size(); I != E; ++I) { |
| unsigned Reg = CSI[I].getReg(); |
| if (SystemZ::GR64BitRegClass.contains(Reg)) |
| addSavedGPR(MBB, MIB, Reg, true); |
| } |
| |
| // ...likewise GPR varargs. |
| if (IsVarArg) |
| for (unsigned I = ZFI->getVarArgsFirstGPR(); I < SystemZ::NumArgGPRs; ++I) |
| addSavedGPR(MBB, MIB, SystemZ::ArgGPRs[I], true); |
| } |
| |
| // Save FPRs/VRs in the normal TargetInstrInfo way. |
| for (unsigned I = 0, E = CSI.size(); I != E; ++I) { |
| unsigned Reg = CSI[I].getReg(); |
| if (SystemZ::FP64BitRegClass.contains(Reg)) { |
| MBB.addLiveIn(Reg); |
| TII->storeRegToStackSlot(MBB, MBBI, Reg, true, CSI[I].getFrameIdx(), |
| &SystemZ::FP64BitRegClass, TRI); |
| } |
| if (SystemZ::VR128BitRegClass.contains(Reg)) { |
| MBB.addLiveIn(Reg); |
| TII->storeRegToStackSlot(MBB, MBBI, Reg, true, CSI[I].getFrameIdx(), |
| &SystemZ::VR128BitRegClass, TRI); |
| } |
| } |
| |
| return true; |
| } |
| |
| bool SystemZFrameLowering:: |
| restoreCalleeSavedRegisters(MachineBasicBlock &MBB, |
| MachineBasicBlock::iterator MBBI, |
| std::vector<CalleeSavedInfo> &CSI, |
| const TargetRegisterInfo *TRI) const { |
| if (CSI.empty()) |
| return false; |
| |
| MachineFunction &MF = *MBB.getParent(); |
| const TargetInstrInfo *TII = MF.getSubtarget().getInstrInfo(); |
| SystemZMachineFunctionInfo *ZFI = MF.getInfo<SystemZMachineFunctionInfo>(); |
| bool HasFP = hasFP(MF); |
| DebugLoc DL = MBBI != MBB.end() ? MBBI->getDebugLoc() : DebugLoc(); |
| |
| // Restore FPRs/VRs in the normal TargetInstrInfo way. |
| for (unsigned I = 0, E = CSI.size(); I != E; ++I) { |
| unsigned Reg = CSI[I].getReg(); |
| if (SystemZ::FP64BitRegClass.contains(Reg)) |
| TII->loadRegFromStackSlot(MBB, MBBI, Reg, CSI[I].getFrameIdx(), |
| &SystemZ::FP64BitRegClass, TRI); |
| if (SystemZ::VR128BitRegClass.contains(Reg)) |
| TII->loadRegFromStackSlot(MBB, MBBI, Reg, CSI[I].getFrameIdx(), |
| &SystemZ::VR128BitRegClass, TRI); |
| } |
| |
| // Restore call-saved GPRs (but not call-clobbered varargs, which at |
| // this point might hold return values). |
| unsigned LowGPR = ZFI->getLowSavedGPR(); |
| unsigned HighGPR = ZFI->getHighSavedGPR(); |
| unsigned StartOffset = RegSpillOffsets[LowGPR]; |
| if (LowGPR) { |
| // If we saved any of %r2-%r5 as varargs, we should also be saving |
| // and restoring %r6. If we're saving %r6 or above, we should be |
| // restoring it too. |
| assert(LowGPR != HighGPR && "Should be loading %r15 and something else"); |
| |
| // Build an LMG instruction. |
| MachineInstrBuilder MIB = BuildMI(MBB, MBBI, DL, TII->get(SystemZ::LMG)); |
| |
| // Add the explicit register operands. |
| MIB.addReg(LowGPR, RegState::Define); |
| MIB.addReg(HighGPR, RegState::Define); |
| |
| // Add the address. |
| MIB.addReg(HasFP ? SystemZ::R11D : SystemZ::R15D); |
| MIB.addImm(StartOffset); |
| |
| // Do a second scan adding regs as being defined by instruction |
| for (unsigned I = 0, E = CSI.size(); I != E; ++I) { |
| unsigned Reg = CSI[I].getReg(); |
| if (Reg != LowGPR && Reg != HighGPR && |
| SystemZ::GR64BitRegClass.contains(Reg)) |
| MIB.addReg(Reg, RegState::ImplicitDefine); |
| } |
| } |
| |
| return true; |
| } |
| |
| void SystemZFrameLowering:: |
| processFunctionBeforeFrameFinalized(MachineFunction &MF, |
| RegScavenger *RS) const { |
| MachineFrameInfo &MFFrame = MF.getFrameInfo(); |
| // Get the size of our stack frame to be allocated ... |
| uint64_t StackSize = (MFFrame.estimateStackSize(MF) + |
| SystemZMC::CallFrameSize); |
| // ... and the maximum offset we may need to reach into the |
| // caller's frame to access the save area or stack arguments. |
| int64_t MaxArgOffset = SystemZMC::CallFrameSize; |
| for (int I = MFFrame.getObjectIndexBegin(); I != 0; ++I) |
| if (MFFrame.getObjectOffset(I) >= 0) { |
| int64_t ArgOffset = SystemZMC::CallFrameSize + |
| MFFrame.getObjectOffset(I) + |
| MFFrame.getObjectSize(I); |
| MaxArgOffset = std::max(MaxArgOffset, ArgOffset); |
| } |
| |
| uint64_t MaxReach = StackSize + MaxArgOffset; |
| if (!isUInt<12>(MaxReach)) { |
| // We may need register scavenging slots if some parts of the frame |
| // are outside the reach of an unsigned 12-bit displacement. |
| // Create 2 for the case where both addresses in an MVC are |
| // out of range. |
| RS->addScavengingFrameIndex(MFFrame.CreateStackObject(8, 8, false)); |
| RS->addScavengingFrameIndex(MFFrame.CreateStackObject(8, 8, false)); |
| } |
| } |
| |
| // Emit instructions before MBBI (in MBB) to add NumBytes to Reg. |
| static void emitIncrement(MachineBasicBlock &MBB, |
| MachineBasicBlock::iterator &MBBI, |
| const DebugLoc &DL, |
| unsigned Reg, int64_t NumBytes, |
| const TargetInstrInfo *TII) { |
| while (NumBytes) { |
| unsigned Opcode; |
| int64_t ThisVal = NumBytes; |
| if (isInt<16>(NumBytes)) |
| Opcode = SystemZ::AGHI; |
| else { |
| Opcode = SystemZ::AGFI; |
| // Make sure we maintain 8-byte stack alignment. |
| int64_t MinVal = -uint64_t(1) << 31; |
| int64_t MaxVal = (int64_t(1) << 31) - 8; |
| if (ThisVal < MinVal) |
| ThisVal = MinVal; |
| else if (ThisVal > MaxVal) |
| ThisVal = MaxVal; |
| } |
| MachineInstr *MI = BuildMI(MBB, MBBI, DL, TII->get(Opcode), Reg) |
| .addReg(Reg).addImm(ThisVal); |
| // The CC implicit def is dead. |
| MI->getOperand(3).setIsDead(); |
| NumBytes -= ThisVal; |
| } |
| } |
| |
| void SystemZFrameLowering::emitPrologue(MachineFunction &MF, |
| MachineBasicBlock &MBB) const { |
| assert(&MF.front() == &MBB && "Shrink-wrapping not yet supported"); |
| MachineFrameInfo &MFFrame = MF.getFrameInfo(); |
| auto *ZII = |
| static_cast<const SystemZInstrInfo *>(MF.getSubtarget().getInstrInfo()); |
| SystemZMachineFunctionInfo *ZFI = MF.getInfo<SystemZMachineFunctionInfo>(); |
| MachineBasicBlock::iterator MBBI = MBB.begin(); |
| MachineModuleInfo &MMI = MF.getMMI(); |
| const MCRegisterInfo *MRI = MMI.getContext().getRegisterInfo(); |
| const std::vector<CalleeSavedInfo> &CSI = MFFrame.getCalleeSavedInfo(); |
| bool HasFP = hasFP(MF); |
| |
| // Debug location must be unknown since the first debug location is used |
| // to determine the end of the prologue. |
| DebugLoc DL; |
| |
| // The current offset of the stack pointer from the CFA. |
| int64_t SPOffsetFromCFA = -SystemZMC::CFAOffsetFromInitialSP; |
| |
| if (ZFI->getLowSavedGPR()) { |
| // Skip over the GPR saves. |
| if (MBBI != MBB.end() && MBBI->getOpcode() == SystemZ::STMG) |
| ++MBBI; |
| else |
| llvm_unreachable("Couldn't skip over GPR saves"); |
| |
| // Add CFI for the GPR saves. |
| for (auto &Save : CSI) { |
| unsigned Reg = Save.getReg(); |
| if (SystemZ::GR64BitRegClass.contains(Reg)) { |
| int64_t Offset = SPOffsetFromCFA + RegSpillOffsets[Reg]; |
| unsigned CFIIndex = MF.addFrameInst(MCCFIInstruction::createOffset( |
| nullptr, MRI->getDwarfRegNum(Reg, true), Offset)); |
| BuildMI(MBB, MBBI, DL, ZII->get(TargetOpcode::CFI_INSTRUCTION)) |
| .addCFIIndex(CFIIndex); |
| } |
| } |
| } |
| |
| uint64_t StackSize = MFFrame.getStackSize(); |
| // We need to allocate the ABI-defined 160-byte base area whenever |
| // we allocate stack space for our own use and whenever we call another |
| // function. |
| if (StackSize || MFFrame.hasVarSizedObjects() || MFFrame.hasCalls()) { |
| StackSize += SystemZMC::CallFrameSize; |
| MFFrame.setStackSize(StackSize); |
| } |
| |
| if (StackSize) { |
| // Determine if we want to store a backchain. |
| bool StoreBackchain = MF.getFunction().hasFnAttribute("backchain"); |
| |
| // If we need backchain, save current stack pointer. R1 is free at this |
| // point. |
| if (StoreBackchain) |
| BuildMI(MBB, MBBI, DL, ZII->get(SystemZ::LGR)) |
| .addReg(SystemZ::R1D, RegState::Define).addReg(SystemZ::R15D); |
| |
| // Allocate StackSize bytes. |
| int64_t Delta = -int64_t(StackSize); |
| emitIncrement(MBB, MBBI, DL, SystemZ::R15D, Delta, ZII); |
| |
| // Add CFI for the allocation. |
| unsigned CFIIndex = MF.addFrameInst( |
| MCCFIInstruction::createDefCfaOffset(nullptr, SPOffsetFromCFA + Delta)); |
| BuildMI(MBB, MBBI, DL, ZII->get(TargetOpcode::CFI_INSTRUCTION)) |
| .addCFIIndex(CFIIndex); |
| SPOffsetFromCFA += Delta; |
| |
| if (StoreBackchain) |
| BuildMI(MBB, MBBI, DL, ZII->get(SystemZ::STG)) |
| .addReg(SystemZ::R1D, RegState::Kill).addReg(SystemZ::R15D).addImm(0).addReg(0); |
| } |
| |
| if (HasFP) { |
| // Copy the base of the frame to R11. |
| BuildMI(MBB, MBBI, DL, ZII->get(SystemZ::LGR), SystemZ::R11D) |
| .addReg(SystemZ::R15D); |
| |
| // Add CFI for the new frame location. |
| unsigned HardFP = MRI->getDwarfRegNum(SystemZ::R11D, true); |
| unsigned CFIIndex = MF.addFrameInst( |
| MCCFIInstruction::createDefCfaRegister(nullptr, HardFP)); |
| BuildMI(MBB, MBBI, DL, ZII->get(TargetOpcode::CFI_INSTRUCTION)) |
| .addCFIIndex(CFIIndex); |
| |
| // Mark the FramePtr as live at the beginning of every block except |
| // the entry block. (We'll have marked R11 as live on entry when |
| // saving the GPRs.) |
| for (auto I = std::next(MF.begin()), E = MF.end(); I != E; ++I) |
| I->addLiveIn(SystemZ::R11D); |
| } |
| |
| // Skip over the FPR/VR saves. |
| SmallVector<unsigned, 8> CFIIndexes; |
| for (auto &Save : CSI) { |
| unsigned Reg = Save.getReg(); |
| if (SystemZ::FP64BitRegClass.contains(Reg)) { |
| if (MBBI != MBB.end() && |
| (MBBI->getOpcode() == SystemZ::STD || |
| MBBI->getOpcode() == SystemZ::STDY)) |
| ++MBBI; |
| else |
| llvm_unreachable("Couldn't skip over FPR save"); |
| } else if (SystemZ::VR128BitRegClass.contains(Reg)) { |
| if (MBBI != MBB.end() && |
| MBBI->getOpcode() == SystemZ::VST) |
| ++MBBI; |
| else |
| llvm_unreachable("Couldn't skip over VR save"); |
| } else |
| continue; |
| |
| // Add CFI for the this save. |
| unsigned DwarfReg = MRI->getDwarfRegNum(Reg, true); |
| unsigned IgnoredFrameReg; |
| int64_t Offset = |
| getFrameIndexReference(MF, Save.getFrameIdx(), IgnoredFrameReg); |
| |
| unsigned CFIIndex = MF.addFrameInst(MCCFIInstruction::createOffset( |
| nullptr, DwarfReg, SPOffsetFromCFA + Offset)); |
| CFIIndexes.push_back(CFIIndex); |
| } |
| // Complete the CFI for the FPR/VR saves, modelling them as taking effect |
| // after the last save. |
| for (auto CFIIndex : CFIIndexes) { |
| BuildMI(MBB, MBBI, DL, ZII->get(TargetOpcode::CFI_INSTRUCTION)) |
| .addCFIIndex(CFIIndex); |
| } |
| } |
| |
| void SystemZFrameLowering::emitEpilogue(MachineFunction &MF, |
| MachineBasicBlock &MBB) const { |
| MachineBasicBlock::iterator MBBI = MBB.getLastNonDebugInstr(); |
| auto *ZII = |
| static_cast<const SystemZInstrInfo *>(MF.getSubtarget().getInstrInfo()); |
| SystemZMachineFunctionInfo *ZFI = MF.getInfo<SystemZMachineFunctionInfo>(); |
| MachineFrameInfo &MFFrame = MF.getFrameInfo(); |
| |
| // Skip the return instruction. |
| assert(MBBI->isReturn() && "Can only insert epilogue into returning blocks"); |
| |
| uint64_t StackSize = MFFrame.getStackSize(); |
| if (ZFI->getLowSavedGPR()) { |
| --MBBI; |
| unsigned Opcode = MBBI->getOpcode(); |
| if (Opcode != SystemZ::LMG) |
| llvm_unreachable("Expected to see callee-save register restore code"); |
| |
| unsigned AddrOpNo = 2; |
| DebugLoc DL = MBBI->getDebugLoc(); |
| uint64_t Offset = StackSize + MBBI->getOperand(AddrOpNo + 1).getImm(); |
| unsigned NewOpcode = ZII->getOpcodeForOffset(Opcode, Offset); |
| |
| // If the offset is too large, use the largest stack-aligned offset |
| // and add the rest to the base register (the stack or frame pointer). |
| if (!NewOpcode) { |
| uint64_t NumBytes = Offset - 0x7fff8; |
| emitIncrement(MBB, MBBI, DL, MBBI->getOperand(AddrOpNo).getReg(), |
| NumBytes, ZII); |
| Offset -= NumBytes; |
| NewOpcode = ZII->getOpcodeForOffset(Opcode, Offset); |
| assert(NewOpcode && "No restore instruction available"); |
| } |
| |
| MBBI->setDesc(ZII->get(NewOpcode)); |
| MBBI->getOperand(AddrOpNo + 1).ChangeToImmediate(Offset); |
| } else if (StackSize) { |
| DebugLoc DL = MBBI->getDebugLoc(); |
| emitIncrement(MBB, MBBI, DL, SystemZ::R15D, StackSize, ZII); |
| } |
| } |
| |
| bool SystemZFrameLowering::hasFP(const MachineFunction &MF) const { |
| return (MF.getTarget().Options.DisableFramePointerElim(MF) || |
| MF.getFrameInfo().hasVarSizedObjects() || |
| MF.getInfo<SystemZMachineFunctionInfo>()->getManipulatesSP()); |
| } |
| |
| bool |
| SystemZFrameLowering::hasReservedCallFrame(const MachineFunction &MF) const { |
| // The ABI requires us to allocate 160 bytes of stack space for the callee, |
| // with any outgoing stack arguments being placed above that. It seems |
| // better to make that area a permanent feature of the frame even if |
| // we're using a frame pointer. |
| return true; |
| } |
| |
| MachineBasicBlock::iterator SystemZFrameLowering:: |
| eliminateCallFramePseudoInstr(MachineFunction &MF, |
| MachineBasicBlock &MBB, |
| MachineBasicBlock::iterator MI) const { |
| switch (MI->getOpcode()) { |
| case SystemZ::ADJCALLSTACKDOWN: |
| case SystemZ::ADJCALLSTACKUP: |
| assert(hasReservedCallFrame(MF) && |
| "ADJSTACKDOWN and ADJSTACKUP should be no-ops"); |
| return MBB.erase(MI); |
| break; |
| |
| default: |
| llvm_unreachable("Unexpected call frame instruction"); |
| } |
| } |