blob: 59f7e0fe60434c31b95f9530d851eb81e95a90da [file] [log] [blame]
//===-- llvm/ADT/APInt.h - For Arbitrary Precision Integer -----*- C++ -*--===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
///
/// \file
/// This file implements a class to represent arbitrary precision
/// integral constant values and operations on them.
///
//===----------------------------------------------------------------------===//
#ifndef LLVM_ADT_APINT_H
#define LLVM_ADT_APINT_H
#include "llvm/Support/Compiler.h"
#include "llvm/Support/MathExtras.h"
#include <cassert>
#include <climits>
#include <cstring>
#include <optional>
#include <utility>
namespace llvm {
class FoldingSetNodeID;
class StringRef;
class hash_code;
class raw_ostream;
template <typename T> class SmallVectorImpl;
template <typename T> class ArrayRef;
template <typename T, typename Enable> struct DenseMapInfo;
class APInt;
inline APInt operator-(APInt);
//===----------------------------------------------------------------------===//
// APInt Class
//===----------------------------------------------------------------------===//
/// Class for arbitrary precision integers.
///
/// APInt is a functional replacement for common case unsigned integer type like
/// "unsigned", "unsigned long" or "uint64_t", but also allows non-byte-width
/// integer sizes and large integer value types such as 3-bits, 15-bits, or more
/// than 64-bits of precision. APInt provides a variety of arithmetic operators
/// and methods to manipulate integer values of any bit-width. It supports both
/// the typical integer arithmetic and comparison operations as well as bitwise
/// manipulation.
///
/// The class has several invariants worth noting:
/// * All bit, byte, and word positions are zero-based.
/// * Once the bit width is set, it doesn't change except by the Truncate,
/// SignExtend, or ZeroExtend operations.
/// * All binary operators must be on APInt instances of the same bit width.
/// Attempting to use these operators on instances with different bit
/// widths will yield an assertion.
/// * The value is stored canonically as an unsigned value. For operations
/// where it makes a difference, there are both signed and unsigned variants
/// of the operation. For example, sdiv and udiv. However, because the bit
/// widths must be the same, operations such as Mul and Add produce the same
/// results regardless of whether the values are interpreted as signed or
/// not.
/// * In general, the class tries to follow the style of computation that LLVM
/// uses in its IR. This simplifies its use for LLVM.
/// * APInt supports zero-bit-width values, but operations that require bits
/// are not defined on it (e.g. you cannot ask for the sign of a zero-bit
/// integer). This means that operations like zero extension and logical
/// shifts are defined, but sign extension and ashr is not. Zero bit values
/// compare and hash equal to themselves, and countLeadingZeros returns 0.
///
class [[nodiscard]] APInt {
public:
typedef uint64_t WordType;
/// This enum is used to hold the constants we needed for APInt.
enum : unsigned {
/// Byte size of a word.
APINT_WORD_SIZE = sizeof(WordType),
/// Bits in a word.
APINT_BITS_PER_WORD = APINT_WORD_SIZE * CHAR_BIT
};
enum class Rounding {
DOWN,
TOWARD_ZERO,
UP,
};
static constexpr WordType WORDTYPE_MAX = ~WordType(0);
/// \name Constructors
/// @{
/// Create a new APInt of numBits width, initialized as val.
///
/// If isSigned is true then val is treated as if it were a signed value
/// (i.e. as an int64_t) and the appropriate sign extension to the bit width
/// will be done. Otherwise, no sign extension occurs (high order bits beyond
/// the range of val are zero filled).
///
/// \param numBits the bit width of the constructed APInt
/// \param val the initial value of the APInt
/// \param isSigned how to treat signedness of val
APInt(unsigned numBits, uint64_t val, bool isSigned = false)
: BitWidth(numBits) {
if (isSingleWord()) {
U.VAL = val;
clearUnusedBits();
} else {
initSlowCase(val, isSigned);
}
}
/// Construct an APInt of numBits width, initialized as bigVal[].
///
/// Note that bigVal.size() can be smaller or larger than the corresponding
/// bit width but any extraneous bits will be dropped.
///
/// \param numBits the bit width of the constructed APInt
/// \param bigVal a sequence of words to form the initial value of the APInt
APInt(unsigned numBits, ArrayRef<uint64_t> bigVal);
/// Equivalent to APInt(numBits, ArrayRef<uint64_t>(bigVal, numWords)), but
/// deprecated because this constructor is prone to ambiguity with the
/// APInt(unsigned, uint64_t, bool) constructor.
///
/// If this overload is ever deleted, care should be taken to prevent calls
/// from being incorrectly captured by the APInt(unsigned, uint64_t, bool)
/// constructor.
APInt(unsigned numBits, unsigned numWords, const uint64_t bigVal[]);
/// Construct an APInt from a string representation.
///
/// This constructor interprets the string \p str in the given radix. The
/// interpretation stops when the first character that is not suitable for the
/// radix is encountered, or the end of the string. Acceptable radix values
/// are 2, 8, 10, 16, and 36. It is an error for the value implied by the
/// string to require more bits than numBits.
///
/// \param numBits the bit width of the constructed APInt
/// \param str the string to be interpreted
/// \param radix the radix to use for the conversion
APInt(unsigned numBits, StringRef str, uint8_t radix);
/// Default constructor that creates an APInt with a 1-bit zero value.
explicit APInt() { U.VAL = 0; }
/// Copy Constructor.
APInt(const APInt &that) : BitWidth(that.BitWidth) {
if (isSingleWord())
U.VAL = that.U.VAL;
else
initSlowCase(that);
}
/// Move Constructor.
APInt(APInt &&that) : BitWidth(that.BitWidth) {
memcpy(&U, &that.U, sizeof(U));
that.BitWidth = 0;
}
/// Destructor.
~APInt() {
if (needsCleanup())
delete[] U.pVal;
}
/// @}
/// \name Value Generators
/// @{
/// Get the '0' value for the specified bit-width.
static APInt getZero(unsigned numBits) { return APInt(numBits, 0); }
LLVM_DEPRECATED("use getZero instead", "getZero")
static APInt getNullValue(unsigned numBits) { return getZero(numBits); }
/// Return an APInt zero bits wide.
static APInt getZeroWidth() { return getZero(0); }
/// Gets maximum unsigned value of APInt for specific bit width.
static APInt getMaxValue(unsigned numBits) { return getAllOnes(numBits); }
/// Gets maximum signed value of APInt for a specific bit width.
static APInt getSignedMaxValue(unsigned numBits) {
APInt API = getAllOnes(numBits);
API.clearBit(numBits - 1);
return API;
}
/// Gets minimum unsigned value of APInt for a specific bit width.
static APInt getMinValue(unsigned numBits) { return APInt(numBits, 0); }
/// Gets minimum signed value of APInt for a specific bit width.
static APInt getSignedMinValue(unsigned numBits) {
APInt API(numBits, 0);
API.setBit(numBits - 1);
return API;
}
/// Get the SignMask for a specific bit width.
///
/// This is just a wrapper function of getSignedMinValue(), and it helps code
/// readability when we want to get a SignMask.
static APInt getSignMask(unsigned BitWidth) {
return getSignedMinValue(BitWidth);
}
/// Return an APInt of a specified width with all bits set.
static APInt getAllOnes(unsigned numBits) {
return APInt(numBits, WORDTYPE_MAX, true);
}
LLVM_DEPRECATED("use getAllOnes instead", "getAllOnes")
static APInt getAllOnesValue(unsigned numBits) { return getAllOnes(numBits); }
/// Return an APInt with exactly one bit set in the result.
static APInt getOneBitSet(unsigned numBits, unsigned BitNo) {
APInt Res(numBits, 0);
Res.setBit(BitNo);
return Res;
}
/// Get a value with a block of bits set.
///
/// Constructs an APInt value that has a contiguous range of bits set. The
/// bits from loBit (inclusive) to hiBit (exclusive) will be set. All other
/// bits will be zero. For example, with parameters(32, 0, 16) you would get
/// 0x0000FFFF. Please call getBitsSetWithWrap if \p loBit may be greater than
/// \p hiBit.
///
/// \param numBits the intended bit width of the result
/// \param loBit the index of the lowest bit set.
/// \param hiBit the index of the highest bit set.
///
/// \returns An APInt value with the requested bits set.
static APInt getBitsSet(unsigned numBits, unsigned loBit, unsigned hiBit) {
APInt Res(numBits, 0);
Res.setBits(loBit, hiBit);
return Res;
}
/// Wrap version of getBitsSet.
/// If \p hiBit is bigger than \p loBit, this is same with getBitsSet.
/// If \p hiBit is not bigger than \p loBit, the set bits "wrap". For example,
/// with parameters (32, 28, 4), you would get 0xF000000F.
/// If \p hiBit is equal to \p loBit, you would get a result with all bits
/// set.
static APInt getBitsSetWithWrap(unsigned numBits, unsigned loBit,
unsigned hiBit) {
APInt Res(numBits, 0);
Res.setBitsWithWrap(loBit, hiBit);
return Res;
}
/// Constructs an APInt value that has a contiguous range of bits set. The
/// bits from loBit (inclusive) to numBits (exclusive) will be set. All other
/// bits will be zero. For example, with parameters(32, 12) you would get
/// 0xFFFFF000.
///
/// \param numBits the intended bit width of the result
/// \param loBit the index of the lowest bit to set.
///
/// \returns An APInt value with the requested bits set.
static APInt getBitsSetFrom(unsigned numBits, unsigned loBit) {
APInt Res(numBits, 0);
Res.setBitsFrom(loBit);
return Res;
}
/// Constructs an APInt value that has the top hiBitsSet bits set.
///
/// \param numBits the bitwidth of the result
/// \param hiBitsSet the number of high-order bits set in the result.
static APInt getHighBitsSet(unsigned numBits, unsigned hiBitsSet) {
APInt Res(numBits, 0);
Res.setHighBits(hiBitsSet);
return Res;
}
/// Constructs an APInt value that has the bottom loBitsSet bits set.
///
/// \param numBits the bitwidth of the result
/// \param loBitsSet the number of low-order bits set in the result.
static APInt getLowBitsSet(unsigned numBits, unsigned loBitsSet) {
APInt Res(numBits, 0);
Res.setLowBits(loBitsSet);
return Res;
}
/// Return a value containing V broadcasted over NewLen bits.
static APInt getSplat(unsigned NewLen, const APInt &V);
/// @}
/// \name Value Tests
/// @{
/// Determine if this APInt just has one word to store value.
///
/// \returns true if the number of bits <= 64, false otherwise.
bool isSingleWord() const { return BitWidth <= APINT_BITS_PER_WORD; }
/// Determine sign of this APInt.
///
/// This tests the high bit of this APInt to determine if it is set.
///
/// \returns true if this APInt is negative, false otherwise
bool isNegative() const { return (*this)[BitWidth - 1]; }
/// Determine if this APInt Value is non-negative (>= 0)
///
/// This tests the high bit of the APInt to determine if it is unset.
bool isNonNegative() const { return !isNegative(); }
/// Determine if sign bit of this APInt is set.
///
/// This tests the high bit of this APInt to determine if it is set.
///
/// \returns true if this APInt has its sign bit set, false otherwise.
bool isSignBitSet() const { return (*this)[BitWidth - 1]; }
/// Determine if sign bit of this APInt is clear.
///
/// This tests the high bit of this APInt to determine if it is clear.
///
/// \returns true if this APInt has its sign bit clear, false otherwise.
bool isSignBitClear() const { return !isSignBitSet(); }
/// Determine if this APInt Value is positive.
///
/// This tests if the value of this APInt is positive (> 0). Note
/// that 0 is not a positive value.
///
/// \returns true if this APInt is positive.
bool isStrictlyPositive() const { return isNonNegative() && !isZero(); }
/// Determine if this APInt Value is non-positive (<= 0).
///
/// \returns true if this APInt is non-positive.
bool isNonPositive() const { return !isStrictlyPositive(); }
/// Determine if this APInt Value only has the specified bit set.
///
/// \returns true if this APInt only has the specified bit set.
bool isOneBitSet(unsigned BitNo) const {
return (*this)[BitNo] && popcount() == 1;
}
/// Determine if all bits are set. This is true for zero-width values.
bool isAllOnes() const {
if (BitWidth == 0)
return true;
if (isSingleWord())
return U.VAL == WORDTYPE_MAX >> (APINT_BITS_PER_WORD - BitWidth);
return countTrailingOnesSlowCase() == BitWidth;
}
LLVM_DEPRECATED("use isAllOnes instead", "isAllOnes")
bool isAllOnesValue() const { return isAllOnes(); }
/// Determine if this value is zero, i.e. all bits are clear.
bool isZero() const {
if (isSingleWord())
return U.VAL == 0;
return countLeadingZerosSlowCase() == BitWidth;
}
LLVM_DEPRECATED("use isZero instead", "isZero")
bool isNullValue() const { return isZero(); }
/// Determine if this is a value of 1.
///
/// This checks to see if the value of this APInt is one.
bool isOne() const {
if (isSingleWord())
return U.VAL == 1;
return countLeadingZerosSlowCase() == BitWidth - 1;
}
LLVM_DEPRECATED("use isOne instead", "isOne")
bool isOneValue() const { return isOne(); }
/// Determine if this is the largest unsigned value.
///
/// This checks to see if the value of this APInt is the maximum unsigned
/// value for the APInt's bit width.
bool isMaxValue() const { return isAllOnes(); }
/// Determine if this is the largest signed value.
///
/// This checks to see if the value of this APInt is the maximum signed
/// value for the APInt's bit width.
bool isMaxSignedValue() const {
if (isSingleWord()) {
assert(BitWidth && "zero width values not allowed");
return U.VAL == ((WordType(1) << (BitWidth - 1)) - 1);
}
return !isNegative() && countTrailingOnesSlowCase() == BitWidth - 1;
}
/// Determine if this is the smallest unsigned value.
///
/// This checks to see if the value of this APInt is the minimum unsigned
/// value for the APInt's bit width.
bool isMinValue() const { return isZero(); }
/// Determine if this is the smallest signed value.
///
/// This checks to see if the value of this APInt is the minimum signed
/// value for the APInt's bit width.
bool isMinSignedValue() const {
if (isSingleWord()) {
assert(BitWidth && "zero width values not allowed");
return U.VAL == (WordType(1) << (BitWidth - 1));
}
return isNegative() && countTrailingZerosSlowCase() == BitWidth - 1;
}
/// Check if this APInt has an N-bits unsigned integer value.
bool isIntN(unsigned N) const { return getActiveBits() <= N; }
/// Check if this APInt has an N-bits signed integer value.
bool isSignedIntN(unsigned N) const { return getSignificantBits() <= N; }
/// Check if this APInt's value is a power of two greater than zero.
///
/// \returns true if the argument APInt value is a power of two > 0.
bool isPowerOf2() const {
if (isSingleWord()) {
assert(BitWidth && "zero width values not allowed");
return isPowerOf2_64(U.VAL);
}
return countPopulationSlowCase() == 1;
}
/// Check if this APInt's negated value is a power of two greater than zero.
bool isNegatedPowerOf2() const {
assert(BitWidth && "zero width values not allowed");
if (isNonNegative())
return false;
// NegatedPowerOf2 - shifted mask in the top bits.
unsigned LO = countl_one();
unsigned TZ = countr_zero();
return (LO + TZ) == BitWidth;
}
/// Check if the APInt's value is returned by getSignMask.
///
/// \returns true if this is the value returned by getSignMask.
bool isSignMask() const { return isMinSignedValue(); }
/// Convert APInt to a boolean value.
///
/// This converts the APInt to a boolean value as a test against zero.
bool getBoolValue() const { return !isZero(); }
/// If this value is smaller than the specified limit, return it, otherwise
/// return the limit value. This causes the value to saturate to the limit.
uint64_t getLimitedValue(uint64_t Limit = UINT64_MAX) const {
return ugt(Limit) ? Limit : getZExtValue();
}
/// Check if the APInt consists of a repeated bit pattern.
///
/// e.g. 0x01010101 satisfies isSplat(8).
/// \param SplatSizeInBits The size of the pattern in bits. Must divide bit
/// width without remainder.
bool isSplat(unsigned SplatSizeInBits) const;
/// \returns true if this APInt value is a sequence of \param numBits ones
/// starting at the least significant bit with the remainder zero.
bool isMask(unsigned numBits) const {
assert(numBits != 0 && "numBits must be non-zero");
assert(numBits <= BitWidth && "numBits out of range");
if (isSingleWord())
return U.VAL == (WORDTYPE_MAX >> (APINT_BITS_PER_WORD - numBits));
unsigned Ones = countTrailingOnesSlowCase();
return (numBits == Ones) &&
((Ones + countLeadingZerosSlowCase()) == BitWidth);
}
/// \returns true if this APInt is a non-empty sequence of ones starting at
/// the least significant bit with the remainder zero.
/// Ex. isMask(0x0000FFFFU) == true.
bool isMask() const {
if (isSingleWord())
return isMask_64(U.VAL);
unsigned Ones = countTrailingOnesSlowCase();
return (Ones > 0) && ((Ones + countLeadingZerosSlowCase()) == BitWidth);
}
/// Return true if this APInt value contains a non-empty sequence of ones with
/// the remainder zero.
bool isShiftedMask() const {
if (isSingleWord())
return isShiftedMask_64(U.VAL);
unsigned Ones = countPopulationSlowCase();
unsigned LeadZ = countLeadingZerosSlowCase();
return (Ones + LeadZ + countr_zero()) == BitWidth;
}
/// Return true if this APInt value contains a non-empty sequence of ones with
/// the remainder zero. If true, \p MaskIdx will specify the index of the
/// lowest set bit and \p MaskLen is updated to specify the length of the
/// mask, else neither are updated.
bool isShiftedMask(unsigned &MaskIdx, unsigned &MaskLen) const {
if (isSingleWord())
return isShiftedMask_64(U.VAL, MaskIdx, MaskLen);
unsigned Ones = countPopulationSlowCase();
unsigned LeadZ = countLeadingZerosSlowCase();
unsigned TrailZ = countTrailingZerosSlowCase();
if ((Ones + LeadZ + TrailZ) != BitWidth)
return false;
MaskLen = Ones;
MaskIdx = TrailZ;
return true;
}
/// Compute an APInt containing numBits highbits from this APInt.
///
/// Get an APInt with the same BitWidth as this APInt, just zero mask the low
/// bits and right shift to the least significant bit.
///
/// \returns the high "numBits" bits of this APInt.
APInt getHiBits(unsigned numBits) const;
/// Compute an APInt containing numBits lowbits from this APInt.
///
/// Get an APInt with the same BitWidth as this APInt, just zero mask the high
/// bits.
///
/// \returns the low "numBits" bits of this APInt.
APInt getLoBits(unsigned numBits) const;
/// Determine if two APInts have the same value, after zero-extending
/// one of them (if needed!) to ensure that the bit-widths match.
static bool isSameValue(const APInt &I1, const APInt &I2) {
if (I1.getBitWidth() == I2.getBitWidth())
return I1 == I2;
if (I1.getBitWidth() > I2.getBitWidth())
return I1 == I2.zext(I1.getBitWidth());
return I1.zext(I2.getBitWidth()) == I2;
}
/// Overload to compute a hash_code for an APInt value.
friend hash_code hash_value(const APInt &Arg);
/// This function returns a pointer to the internal storage of the APInt.
/// This is useful for writing out the APInt in binary form without any
/// conversions.
const uint64_t *getRawData() const {
if (isSingleWord())
return &U.VAL;
return &U.pVal[0];
}
/// @}
/// \name Unary Operators
/// @{
/// Postfix increment operator. Increment *this by 1.
///
/// \returns a new APInt value representing the original value of *this.
APInt operator++(int) {
APInt API(*this);
++(*this);
return API;
}
/// Prefix increment operator.
///
/// \returns *this incremented by one
APInt &operator++();
/// Postfix decrement operator. Decrement *this by 1.
///
/// \returns a new APInt value representing the original value of *this.
APInt operator--(int) {
APInt API(*this);
--(*this);
return API;
}
/// Prefix decrement operator.
///
/// \returns *this decremented by one.
APInt &operator--();
/// Logical negation operation on this APInt returns true if zero, like normal
/// integers.
bool operator!() const { return isZero(); }
/// @}
/// \name Assignment Operators
/// @{
/// Copy assignment operator.
///
/// \returns *this after assignment of RHS.
APInt &operator=(const APInt &RHS) {
// The common case (both source or dest being inline) doesn't require
// allocation or deallocation.
if (isSingleWord() && RHS.isSingleWord()) {
U.VAL = RHS.U.VAL;
BitWidth = RHS.BitWidth;
return *this;
}
assignSlowCase(RHS);
return *this;
}
/// Move assignment operator.
APInt &operator=(APInt &&that) {
#ifdef EXPENSIVE_CHECKS
// Some std::shuffle implementations still do self-assignment.
if (this == &that)
return *this;
#endif
assert(this != &that && "Self-move not supported");
if (!isSingleWord())
delete[] U.pVal;
// Use memcpy so that type based alias analysis sees both VAL and pVal
// as modified.
memcpy(&U, &that.U, sizeof(U));
BitWidth = that.BitWidth;
that.BitWidth = 0;
return *this;
}
/// Assignment operator.
///
/// The RHS value is assigned to *this. If the significant bits in RHS exceed
/// the bit width, the excess bits are truncated. If the bit width is larger
/// than 64, the value is zero filled in the unspecified high order bits.
///
/// \returns *this after assignment of RHS value.
APInt &operator=(uint64_t RHS) {
if (isSingleWord()) {
U.VAL = RHS;
return clearUnusedBits();
}
U.pVal[0] = RHS;
memset(U.pVal + 1, 0, (getNumWords() - 1) * APINT_WORD_SIZE);
return *this;
}
/// Bitwise AND assignment operator.
///
/// Performs a bitwise AND operation on this APInt and RHS. The result is
/// assigned to *this.
///
/// \returns *this after ANDing with RHS.
APInt &operator&=(const APInt &RHS) {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
if (isSingleWord())
U.VAL &= RHS.U.VAL;
else
andAssignSlowCase(RHS);
return *this;
}
/// Bitwise AND assignment operator.
///
/// Performs a bitwise AND operation on this APInt and RHS. RHS is
/// logically zero-extended or truncated to match the bit-width of
/// the LHS.
APInt &operator&=(uint64_t RHS) {
if (isSingleWord()) {
U.VAL &= RHS;
return *this;
}
U.pVal[0] &= RHS;
memset(U.pVal + 1, 0, (getNumWords() - 1) * APINT_WORD_SIZE);
return *this;
}
/// Bitwise OR assignment operator.
///
/// Performs a bitwise OR operation on this APInt and RHS. The result is
/// assigned *this;
///
/// \returns *this after ORing with RHS.
APInt &operator|=(const APInt &RHS) {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
if (isSingleWord())
U.VAL |= RHS.U.VAL;
else
orAssignSlowCase(RHS);
return *this;
}
/// Bitwise OR assignment operator.
///
/// Performs a bitwise OR operation on this APInt and RHS. RHS is
/// logically zero-extended or truncated to match the bit-width of
/// the LHS.
APInt &operator|=(uint64_t RHS) {
if (isSingleWord()) {
U.VAL |= RHS;
return clearUnusedBits();
}
U.pVal[0] |= RHS;
return *this;
}
/// Bitwise XOR assignment operator.
///
/// Performs a bitwise XOR operation on this APInt and RHS. The result is
/// assigned to *this.
///
/// \returns *this after XORing with RHS.
APInt &operator^=(const APInt &RHS) {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
if (isSingleWord())
U.VAL ^= RHS.U.VAL;
else
xorAssignSlowCase(RHS);
return *this;
}
/// Bitwise XOR assignment operator.
///
/// Performs a bitwise XOR operation on this APInt and RHS. RHS is
/// logically zero-extended or truncated to match the bit-width of
/// the LHS.
APInt &operator^=(uint64_t RHS) {
if (isSingleWord()) {
U.VAL ^= RHS;
return clearUnusedBits();
}
U.pVal[0] ^= RHS;
return *this;
}
/// Multiplication assignment operator.
///
/// Multiplies this APInt by RHS and assigns the result to *this.
///
/// \returns *this
APInt &operator*=(const APInt &RHS);
APInt &operator*=(uint64_t RHS);
/// Addition assignment operator.
///
/// Adds RHS to *this and assigns the result to *this.
///
/// \returns *this
APInt &operator+=(const APInt &RHS);
APInt &operator+=(uint64_t RHS);
/// Subtraction assignment operator.
///
/// Subtracts RHS from *this and assigns the result to *this.
///
/// \returns *this
APInt &operator-=(const APInt &RHS);
APInt &operator-=(uint64_t RHS);
/// Left-shift assignment function.
///
/// Shifts *this left by shiftAmt and assigns the result to *this.
///
/// \returns *this after shifting left by ShiftAmt
APInt &operator<<=(unsigned ShiftAmt) {
assert(ShiftAmt <= BitWidth && "Invalid shift amount");
if (isSingleWord()) {
if (ShiftAmt == BitWidth)
U.VAL = 0;
else
U.VAL <<= ShiftAmt;
return clearUnusedBits();
}
shlSlowCase(ShiftAmt);
return *this;
}
/// Left-shift assignment function.
///
/// Shifts *this left by shiftAmt and assigns the result to *this.
///
/// \returns *this after shifting left by ShiftAmt
APInt &operator<<=(const APInt &ShiftAmt);
/// @}
/// \name Binary Operators
/// @{
/// Multiplication operator.
///
/// Multiplies this APInt by RHS and returns the result.
APInt operator*(const APInt &RHS) const;
/// Left logical shift operator.
///
/// Shifts this APInt left by \p Bits and returns the result.
APInt operator<<(unsigned Bits) const { return shl(Bits); }
/// Left logical shift operator.
///
/// Shifts this APInt left by \p Bits and returns the result.
APInt operator<<(const APInt &Bits) const { return shl(Bits); }
/// Arithmetic right-shift function.
///
/// Arithmetic right-shift this APInt by shiftAmt.
APInt ashr(unsigned ShiftAmt) const {
APInt R(*this);
R.ashrInPlace(ShiftAmt);
return R;
}
/// Arithmetic right-shift this APInt by ShiftAmt in place.
void ashrInPlace(unsigned ShiftAmt) {
assert(ShiftAmt <= BitWidth && "Invalid shift amount");
if (isSingleWord()) {
int64_t SExtVAL = SignExtend64(U.VAL, BitWidth);
if (ShiftAmt == BitWidth)
U.VAL = SExtVAL >> (APINT_BITS_PER_WORD - 1); // Fill with sign bit.
else
U.VAL = SExtVAL >> ShiftAmt;
clearUnusedBits();
return;
}
ashrSlowCase(ShiftAmt);
}
/// Logical right-shift function.
///
/// Logical right-shift this APInt by shiftAmt.
APInt lshr(unsigned shiftAmt) const {
APInt R(*this);
R.lshrInPlace(shiftAmt);
return R;
}
/// Logical right-shift this APInt by ShiftAmt in place.
void lshrInPlace(unsigned ShiftAmt) {
assert(ShiftAmt <= BitWidth && "Invalid shift amount");
if (isSingleWord()) {
if (ShiftAmt == BitWidth)
U.VAL = 0;
else
U.VAL >>= ShiftAmt;
return;
}
lshrSlowCase(ShiftAmt);
}
/// Left-shift function.
///
/// Left-shift this APInt by shiftAmt.
APInt shl(unsigned shiftAmt) const {
APInt R(*this);
R <<= shiftAmt;
return R;
}
/// relative logical shift right
APInt relativeLShr(int RelativeShift) const {
return RelativeShift > 0 ? lshr(RelativeShift) : shl(-RelativeShift);
}
/// relative logical shift left
APInt relativeLShl(int RelativeShift) const {
return relativeLShr(-RelativeShift);
}
/// relative arithmetic shift right
APInt relativeAShr(int RelativeShift) const {
return RelativeShift > 0 ? ashr(RelativeShift) : shl(-RelativeShift);
}
/// relative arithmetic shift left
APInt relativeAShl(int RelativeShift) const {
return relativeAShr(-RelativeShift);
}
/// Rotate left by rotateAmt.
APInt rotl(unsigned rotateAmt) const;
/// Rotate right by rotateAmt.
APInt rotr(unsigned rotateAmt) const;
/// Arithmetic right-shift function.
///
/// Arithmetic right-shift this APInt by shiftAmt.
APInt ashr(const APInt &ShiftAmt) const {
APInt R(*this);
R.ashrInPlace(ShiftAmt);
return R;
}
/// Arithmetic right-shift this APInt by shiftAmt in place.
void ashrInPlace(const APInt &shiftAmt);
/// Logical right-shift function.
///
/// Logical right-shift this APInt by shiftAmt.
APInt lshr(const APInt &ShiftAmt) const {
APInt R(*this);
R.lshrInPlace(ShiftAmt);
return R;
}
/// Logical right-shift this APInt by ShiftAmt in place.
void lshrInPlace(const APInt &ShiftAmt);
/// Left-shift function.
///
/// Left-shift this APInt by shiftAmt.
APInt shl(const APInt &ShiftAmt) const {
APInt R(*this);
R <<= ShiftAmt;
return R;
}
/// Rotate left by rotateAmt.
APInt rotl(const APInt &rotateAmt) const;
/// Rotate right by rotateAmt.
APInt rotr(const APInt &rotateAmt) const;
/// Concatenate the bits from "NewLSB" onto the bottom of *this. This is
/// equivalent to:
/// (this->zext(NewWidth) << NewLSB.getBitWidth()) | NewLSB.zext(NewWidth)
APInt concat(const APInt &NewLSB) const {
/// If the result will be small, then both the merged values are small.
unsigned NewWidth = getBitWidth() + NewLSB.getBitWidth();
if (NewWidth <= APINT_BITS_PER_WORD)
return APInt(NewWidth, (U.VAL << NewLSB.getBitWidth()) | NewLSB.U.VAL);
return concatSlowCase(NewLSB);
}
/// Unsigned division operation.
///
/// Perform an unsigned divide operation on this APInt by RHS. Both this and
/// RHS are treated as unsigned quantities for purposes of this division.
///
/// \returns a new APInt value containing the division result, rounded towards
/// zero.
APInt udiv(const APInt &RHS) const;
APInt udiv(uint64_t RHS) const;
/// Signed division function for APInt.
///
/// Signed divide this APInt by APInt RHS.
///
/// The result is rounded towards zero.
APInt sdiv(const APInt &RHS) const;
APInt sdiv(int64_t RHS) const;
/// Unsigned remainder operation.
///
/// Perform an unsigned remainder operation on this APInt with RHS being the
/// divisor. Both this and RHS are treated as unsigned quantities for purposes
/// of this operation.
///
/// \returns a new APInt value containing the remainder result
APInt urem(const APInt &RHS) const;
uint64_t urem(uint64_t RHS) const;
/// Function for signed remainder operation.
///
/// Signed remainder operation on APInt.
///
/// Note that this is a true remainder operation and not a modulo operation
/// because the sign follows the sign of the dividend which is *this.
APInt srem(const APInt &RHS) const;
int64_t srem(int64_t RHS) const;
/// Dual division/remainder interface.
///
/// Sometimes it is convenient to divide two APInt values and obtain both the
/// quotient and remainder. This function does both operations in the same
/// computation making it a little more efficient. The pair of input arguments
/// may overlap with the pair of output arguments. It is safe to call
/// udivrem(X, Y, X, Y), for example.
static void udivrem(const APInt &LHS, const APInt &RHS, APInt &Quotient,
APInt &Remainder);
static void udivrem(const APInt &LHS, uint64_t RHS, APInt &Quotient,
uint64_t &Remainder);
static void sdivrem(const APInt &LHS, const APInt &RHS, APInt &Quotient,
APInt &Remainder);
static void sdivrem(const APInt &LHS, int64_t RHS, APInt &Quotient,
int64_t &Remainder);
// Operations that return overflow indicators.
APInt sadd_ov(const APInt &RHS, bool &Overflow) const;
APInt uadd_ov(const APInt &RHS, bool &Overflow) const;
APInt ssub_ov(const APInt &RHS, bool &Overflow) const;
APInt usub_ov(const APInt &RHS, bool &Overflow) const;
APInt sdiv_ov(const APInt &RHS, bool &Overflow) const;
APInt smul_ov(const APInt &RHS, bool &Overflow) const;
APInt umul_ov(const APInt &RHS, bool &Overflow) const;
APInt sshl_ov(const APInt &Amt, bool &Overflow) const;
APInt sshl_ov(unsigned Amt, bool &Overflow) const;
APInt ushl_ov(const APInt &Amt, bool &Overflow) const;
APInt ushl_ov(unsigned Amt, bool &Overflow) const;
// Operations that saturate
APInt sadd_sat(const APInt &RHS) const;
APInt uadd_sat(const APInt &RHS) const;
APInt ssub_sat(const APInt &RHS) const;
APInt usub_sat(const APInt &RHS) const;
APInt smul_sat(const APInt &RHS) const;
APInt umul_sat(const APInt &RHS) const;
APInt sshl_sat(const APInt &RHS) const;
APInt sshl_sat(unsigned RHS) const;
APInt ushl_sat(const APInt &RHS) const;
APInt ushl_sat(unsigned RHS) const;
/// Array-indexing support.
///
/// \returns the bit value at bitPosition
bool operator[](unsigned bitPosition) const {
assert(bitPosition < getBitWidth() && "Bit position out of bounds!");
return (maskBit(bitPosition) & getWord(bitPosition)) != 0;
}
/// @}
/// \name Comparison Operators
/// @{
/// Equality operator.
///
/// Compares this APInt with RHS for the validity of the equality
/// relationship.
bool operator==(const APInt &RHS) const {
assert(BitWidth == RHS.BitWidth && "Comparison requires equal bit widths");
if (isSingleWord())
return U.VAL == RHS.U.VAL;
return equalSlowCase(RHS);
}
/// Equality operator.
///
/// Compares this APInt with a uint64_t for the validity of the equality
/// relationship.
///
/// \returns true if *this == Val
bool operator==(uint64_t Val) const {
return (isSingleWord() || getActiveBits() <= 64) && getZExtValue() == Val;
}
/// Equality comparison.
///
/// Compares this APInt with RHS for the validity of the equality
/// relationship.
///
/// \returns true if *this == Val
bool eq(const APInt &RHS) const { return (*this) == RHS; }
/// Inequality operator.
///
/// Compares this APInt with RHS for the validity of the inequality
/// relationship.
///
/// \returns true if *this != Val
bool operator!=(const APInt &RHS) const { return !((*this) == RHS); }
/// Inequality operator.
///
/// Compares this APInt with a uint64_t for the validity of the inequality
/// relationship.
///
/// \returns true if *this != Val
bool operator!=(uint64_t Val) const { return !((*this) == Val); }
/// Inequality comparison
///
/// Compares this APInt with RHS for the validity of the inequality
/// relationship.
///
/// \returns true if *this != Val
bool ne(const APInt &RHS) const { return !((*this) == RHS); }
/// Unsigned less than comparison
///
/// Regards both *this and RHS as unsigned quantities and compares them for
/// the validity of the less-than relationship.
///
/// \returns true if *this < RHS when both are considered unsigned.
bool ult(const APInt &RHS) const { return compare(RHS) < 0; }
/// Unsigned less than comparison
///
/// Regards both *this as an unsigned quantity and compares it with RHS for
/// the validity of the less-than relationship.
///
/// \returns true if *this < RHS when considered unsigned.
bool ult(uint64_t RHS) const {
// Only need to check active bits if not a single word.
return (isSingleWord() || getActiveBits() <= 64) && getZExtValue() < RHS;
}
/// Signed less than comparison
///
/// Regards both *this and RHS as signed quantities and compares them for
/// validity of the less-than relationship.
///
/// \returns true if *this < RHS when both are considered signed.
bool slt(const APInt &RHS) const { return compareSigned(RHS) < 0; }
/// Signed less than comparison
///
/// Regards both *this as a signed quantity and compares it with RHS for
/// the validity of the less-than relationship.
///
/// \returns true if *this < RHS when considered signed.
bool slt(int64_t RHS) const {
return (!isSingleWord() && getSignificantBits() > 64)
? isNegative()
: getSExtValue() < RHS;
}
/// Unsigned less or equal comparison
///
/// Regards both *this and RHS as unsigned quantities and compares them for
/// validity of the less-or-equal relationship.
///
/// \returns true if *this <= RHS when both are considered unsigned.
bool ule(const APInt &RHS) const { return compare(RHS) <= 0; }
/// Unsigned less or equal comparison
///
/// Regards both *this as an unsigned quantity and compares it with RHS for
/// the validity of the less-or-equal relationship.
///
/// \returns true if *this <= RHS when considered unsigned.
bool ule(uint64_t RHS) const { return !ugt(RHS); }
/// Signed less or equal comparison
///
/// Regards both *this and RHS as signed quantities and compares them for
/// validity of the less-or-equal relationship.
///
/// \returns true if *this <= RHS when both are considered signed.
bool sle(const APInt &RHS) const { return compareSigned(RHS) <= 0; }
/// Signed less or equal comparison
///
/// Regards both *this as a signed quantity and compares it with RHS for the
/// validity of the less-or-equal relationship.
///
/// \returns true if *this <= RHS when considered signed.
bool sle(uint64_t RHS) const { return !sgt(RHS); }
/// Unsigned greater than comparison
///
/// Regards both *this and RHS as unsigned quantities and compares them for
/// the validity of the greater-than relationship.
///
/// \returns true if *this > RHS when both are considered unsigned.
bool ugt(const APInt &RHS) const { return !ule(RHS); }
/// Unsigned greater than comparison
///
/// Regards both *this as an unsigned quantity and compares it with RHS for
/// the validity of the greater-than relationship.
///
/// \returns true if *this > RHS when considered unsigned.
bool ugt(uint64_t RHS) const {
// Only need to check active bits if not a single word.
return (!isSingleWord() && getActiveBits() > 64) || getZExtValue() > RHS;
}
/// Signed greater than comparison
///
/// Regards both *this and RHS as signed quantities and compares them for the
/// validity of the greater-than relationship.
///
/// \returns true if *this > RHS when both are considered signed.
bool sgt(const APInt &RHS) const { return !sle(RHS); }
/// Signed greater than comparison
///
/// Regards both *this as a signed quantity and compares it with RHS for
/// the validity of the greater-than relationship.
///
/// \returns true if *this > RHS when considered signed.
bool sgt(int64_t RHS) const {
return (!isSingleWord() && getSignificantBits() > 64)
? !isNegative()
: getSExtValue() > RHS;
}
/// Unsigned greater or equal comparison
///
/// Regards both *this and RHS as unsigned quantities and compares them for
/// validity of the greater-or-equal relationship.
///
/// \returns true if *this >= RHS when both are considered unsigned.
bool uge(const APInt &RHS) const { return !ult(RHS); }
/// Unsigned greater or equal comparison
///
/// Regards both *this as an unsigned quantity and compares it with RHS for
/// the validity of the greater-or-equal relationship.
///
/// \returns true if *this >= RHS when considered unsigned.
bool uge(uint64_t RHS) const { return !ult(RHS); }
/// Signed greater or equal comparison
///
/// Regards both *this and RHS as signed quantities and compares them for
/// validity of the greater-or-equal relationship.
///
/// \returns true if *this >= RHS when both are considered signed.
bool sge(const APInt &RHS) const { return !slt(RHS); }
/// Signed greater or equal comparison
///
/// Regards both *this as a signed quantity and compares it with RHS for
/// the validity of the greater-or-equal relationship.
///
/// \returns true if *this >= RHS when considered signed.
bool sge(int64_t RHS) const { return !slt(RHS); }
/// This operation tests if there are any pairs of corresponding bits
/// between this APInt and RHS that are both set.
bool intersects(const APInt &RHS) const {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
if (isSingleWord())
return (U.VAL & RHS.U.VAL) != 0;
return intersectsSlowCase(RHS);
}
/// This operation checks that all bits set in this APInt are also set in RHS.
bool isSubsetOf(const APInt &RHS) const {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
if (isSingleWord())
return (U.VAL & ~RHS.U.VAL) == 0;
return isSubsetOfSlowCase(RHS);
}
/// @}
/// \name Resizing Operators
/// @{
/// Truncate to new width.
///
/// Truncate the APInt to a specified width. It is an error to specify a width
/// that is greater than the current width.
APInt trunc(unsigned width) const;
/// Truncate to new width with unsigned saturation.
///
/// If the APInt, treated as unsigned integer, can be losslessly truncated to
/// the new bitwidth, then return truncated APInt. Else, return max value.
APInt truncUSat(unsigned width) const;
/// Truncate to new width with signed saturation.
///
/// If this APInt, treated as signed integer, can be losslessly truncated to
/// the new bitwidth, then return truncated APInt. Else, return either
/// signed min value if the APInt was negative, or signed max value.
APInt truncSSat(unsigned width) const;
/// Sign extend to a new width.
///
/// This operation sign extends the APInt to a new width. If the high order
/// bit is set, the fill on the left will be done with 1 bits, otherwise zero.
/// It is an error to specify a width that is less than the
/// current width.
APInt sext(unsigned width) const;
/// Zero extend to a new width.
///
/// This operation zero extends the APInt to a new width. The high order bits
/// are filled with 0 bits. It is an error to specify a width that is less
/// than the current width.
APInt zext(unsigned width) const;
/// Sign extend or truncate to width
///
/// Make this APInt have the bit width given by \p width. The value is sign
/// extended, truncated, or left alone to make it that width.
APInt sextOrTrunc(unsigned width) const;
/// Zero extend or truncate to width
///
/// Make this APInt have the bit width given by \p width. The value is zero
/// extended, truncated, or left alone to make it that width.
APInt zextOrTrunc(unsigned width) const;
/// @}
/// \name Bit Manipulation Operators
/// @{
/// Set every bit to 1.
void setAllBits() {
if (isSingleWord())
U.VAL = WORDTYPE_MAX;
else
// Set all the bits in all the words.
memset(U.pVal, -1, getNumWords() * APINT_WORD_SIZE);
// Clear the unused ones
clearUnusedBits();
}
/// Set the given bit to 1 whose position is given as "bitPosition".
void setBit(unsigned BitPosition) {
assert(BitPosition < BitWidth && "BitPosition out of range");
WordType Mask = maskBit(BitPosition);
if (isSingleWord())
U.VAL |= Mask;
else
U.pVal[whichWord(BitPosition)] |= Mask;
}
/// Set the sign bit to 1.
void setSignBit() { setBit(BitWidth - 1); }
/// Set a given bit to a given value.
void setBitVal(unsigned BitPosition, bool BitValue) {
if (BitValue)
setBit(BitPosition);
else
clearBit(BitPosition);
}
/// Set the bits from loBit (inclusive) to hiBit (exclusive) to 1.
/// This function handles "wrap" case when \p loBit >= \p hiBit, and calls
/// setBits when \p loBit < \p hiBit.
/// For \p loBit == \p hiBit wrap case, set every bit to 1.
void setBitsWithWrap(unsigned loBit, unsigned hiBit) {
assert(hiBit <= BitWidth && "hiBit out of range");
assert(loBit <= BitWidth && "loBit out of range");
if (loBit < hiBit) {
setBits(loBit, hiBit);
return;
}
setLowBits(hiBit);
setHighBits(BitWidth - loBit);
}
/// Set the bits from loBit (inclusive) to hiBit (exclusive) to 1.
/// This function handles case when \p loBit <= \p hiBit.
void setBits(unsigned loBit, unsigned hiBit) {
assert(hiBit <= BitWidth && "hiBit out of range");
assert(loBit <= BitWidth && "loBit out of range");
assert(loBit <= hiBit && "loBit greater than hiBit");
if (loBit == hiBit)
return;
if (loBit < APINT_BITS_PER_WORD && hiBit <= APINT_BITS_PER_WORD) {
uint64_t mask = WORDTYPE_MAX >> (APINT_BITS_PER_WORD - (hiBit - loBit));
mask <<= loBit;
if (isSingleWord())
U.VAL |= mask;
else
U.pVal[0] |= mask;
} else {
setBitsSlowCase(loBit, hiBit);
}
}
/// Set the top bits starting from loBit.
void setBitsFrom(unsigned loBit) { return setBits(loBit, BitWidth); }
/// Set the bottom loBits bits.
void setLowBits(unsigned loBits) { return setBits(0, loBits); }
/// Set the top hiBits bits.
void setHighBits(unsigned hiBits) {
return setBits(BitWidth - hiBits, BitWidth);
}
/// Set every bit to 0.
void clearAllBits() {
if (isSingleWord())
U.VAL = 0;
else
memset(U.pVal, 0, getNumWords() * APINT_WORD_SIZE);
}
/// Set a given bit to 0.
///
/// Set the given bit to 0 whose position is given as "bitPosition".
void clearBit(unsigned BitPosition) {
assert(BitPosition < BitWidth && "BitPosition out of range");
WordType Mask = ~maskBit(BitPosition);
if (isSingleWord())
U.VAL &= Mask;
else
U.pVal[whichWord(BitPosition)] &= Mask;
}
/// Set bottom loBits bits to 0.
void clearLowBits(unsigned loBits) {
assert(loBits <= BitWidth && "More bits than bitwidth");
APInt Keep = getHighBitsSet(BitWidth, BitWidth - loBits);
*this &= Keep;
}
/// Set the sign bit to 0.
void clearSignBit() { clearBit(BitWidth - 1); }
/// Toggle every bit to its opposite value.
void flipAllBits() {
if (isSingleWord()) {
U.VAL ^= WORDTYPE_MAX;
clearUnusedBits();
} else {
flipAllBitsSlowCase();
}
}
/// Toggles a given bit to its opposite value.
///
/// Toggle a given bit to its opposite value whose position is given
/// as "bitPosition".
void flipBit(unsigned bitPosition);
/// Negate this APInt in place.
void negate() {
flipAllBits();
++(*this);
}
/// Insert the bits from a smaller APInt starting at bitPosition.
void insertBits(const APInt &SubBits, unsigned bitPosition);
void insertBits(uint64_t SubBits, unsigned bitPosition, unsigned numBits);
/// Return an APInt with the extracted bits [bitPosition,bitPosition+numBits).
APInt extractBits(unsigned numBits, unsigned bitPosition) const;
uint64_t extractBitsAsZExtValue(unsigned numBits, unsigned bitPosition) const;
/// @}
/// \name Value Characterization Functions
/// @{
/// Return the number of bits in the APInt.
unsigned getBitWidth() const { return BitWidth; }
/// Get the number of words.
///
/// Here one word's bitwidth equals to that of uint64_t.
///
/// \returns the number of words to hold the integer value of this APInt.
unsigned getNumWords() const { return getNumWords(BitWidth); }
/// Get the number of words.
///
/// *NOTE* Here one word's bitwidth equals to that of uint64_t.
///
/// \returns the number of words to hold the integer value with a given bit
/// width.
static unsigned getNumWords(unsigned BitWidth) {
return ((uint64_t)BitWidth + APINT_BITS_PER_WORD - 1) / APINT_BITS_PER_WORD;
}
/// Compute the number of active bits in the value
///
/// This function returns the number of active bits which is defined as the
/// bit width minus the number of leading zeros. This is used in several
/// computations to see how "wide" the value is.
unsigned getActiveBits() const { return BitWidth - countl_zero(); }
/// Compute the number of active words in the value of this APInt.
///
/// This is used in conjunction with getActiveData to extract the raw value of
/// the APInt.
unsigned getActiveWords() const {
unsigned numActiveBits = getActiveBits();
return numActiveBits ? whichWord(numActiveBits - 1) + 1 : 1;
}
/// Get the minimum bit size for this signed APInt
///
/// Computes the minimum bit width for this APInt while considering it to be a
/// signed (and probably negative) value. If the value is not negative, this
/// function returns the same value as getActiveBits()+1. Otherwise, it
/// returns the smallest bit width that will retain the negative value. For
/// example, -1 can be written as 0b1 or 0xFFFFFFFFFF. 0b1 is shorter and so
/// for -1, this function will always return 1.
unsigned getSignificantBits() const {
return BitWidth - getNumSignBits() + 1;
}
LLVM_DEPRECATED("use getSignificantBits instead", "getSignificantBits")
unsigned getMinSignedBits() const { return getSignificantBits(); }
/// Get zero extended value
///
/// This method attempts to return the value of this APInt as a zero extended
/// uint64_t. The bitwidth must be <= 64 or the value must fit within a
/// uint64_t. Otherwise an assertion will result.
uint64_t getZExtValue() const {
if (isSingleWord())
return U.VAL;
assert(getActiveBits() <= 64 && "Too many bits for uint64_t");
return U.pVal[0];
}
/// Get zero extended value if possible
///
/// This method attempts to return the value of this APInt as a zero extended
/// uint64_t. The bitwidth must be <= 64 or the value must fit within a
/// uint64_t. Otherwise no value is returned.
std::optional<uint64_t> tryZExtValue() const {
return (getActiveBits() <= 64) ? std::optional<uint64_t>(getZExtValue())
: std::nullopt;
};
/// Get sign extended value
///
/// This method attempts to return the value of this APInt as a sign extended
/// int64_t. The bit width must be <= 64 or the value must fit within an
/// int64_t. Otherwise an assertion will result.
int64_t getSExtValue() const {
if (isSingleWord())
return SignExtend64(U.VAL, BitWidth);
assert(getSignificantBits() <= 64 && "Too many bits for int64_t");
return int64_t(U.pVal[0]);
}
/// Get sign extended value if possible
///
/// This method attempts to return the value of this APInt as a sign extended
/// int64_t. The bitwidth must be <= 64 or the value must fit within an
/// int64_t. Otherwise no value is returned.
std::optional<int64_t> trySExtValue() const {
return (getSignificantBits() <= 64) ? std::optional<int64_t>(getSExtValue())
: std::nullopt;
};
/// Get bits required for string value.
///
/// This method determines how many bits are required to hold the APInt
/// equivalent of the string given by \p str.
static unsigned getBitsNeeded(StringRef str, uint8_t radix);
/// Get the bits that are sufficient to represent the string value. This may
/// over estimate the amount of bits required, but it does not require
/// parsing the value in the string.
static unsigned getSufficientBitsNeeded(StringRef Str, uint8_t Radix);
/// The APInt version of std::countl_zero.
///
/// It counts the number of zeros from the most significant bit to the first
/// one bit.
///
/// \returns BitWidth if the value is zero, otherwise returns the number of
/// zeros from the most significant bit to the first one bits.
unsigned countl_zero() const {
if (isSingleWord()) {
unsigned unusedBits = APINT_BITS_PER_WORD - BitWidth;
return llvm::countl_zero(U.VAL) - unusedBits;
}
return countLeadingZerosSlowCase();
}
unsigned countLeadingZeros() const { return countl_zero(); }
/// Count the number of leading one bits.
///
/// This function is an APInt version of std::countl_one. It counts the number
/// of ones from the most significant bit to the first zero bit.
///
/// \returns 0 if the high order bit is not set, otherwise returns the number
/// of 1 bits from the most significant to the least
unsigned countl_one() const {
if (isSingleWord()) {
if (LLVM_UNLIKELY(BitWidth == 0))
return 0;
return llvm::countl_one(U.VAL << (APINT_BITS_PER_WORD - BitWidth));
}
return countLeadingOnesSlowCase();
}
unsigned countLeadingOnes() const { return countl_one(); }
/// Computes the number of leading bits of this APInt that are equal to its
/// sign bit.
unsigned getNumSignBits() const {
return isNegative() ? countl_one() : countl_zero();
}
/// Count the number of trailing zero bits.
///
/// This function is an APInt version of std::countr_zero. It counts the number
/// of zeros from the least significant bit to the first set bit.
///
/// \returns BitWidth if the value is zero, otherwise returns the number of
/// zeros from the least significant bit to the first one bit.
unsigned countr_zero() const {
if (isSingleWord()) {
unsigned TrailingZeros = llvm::countr_zero(U.VAL);
return (TrailingZeros > BitWidth ? BitWidth : TrailingZeros);
}
return countTrailingZerosSlowCase();
}
unsigned countTrailingZeros() const { return countr_zero(); }
/// Count the number of trailing one bits.
///
/// This function is an APInt version of std::countr_one. It counts the number
/// of ones from the least significant bit to the first zero bit.
///
/// \returns BitWidth if the value is all ones, otherwise returns the number
/// of ones from the least significant bit to the first zero bit.
unsigned countr_one() const {
if (isSingleWord())
return llvm::countr_one(U.VAL);
return countTrailingOnesSlowCase();
}
unsigned countTrailingOnes() const { return countr_one(); }
/// Count the number of bits set.
///
/// This function is an APInt version of std::popcount. It counts the number
/// of 1 bits in the APInt value.
///
/// \returns 0 if the value is zero, otherwise returns the number of set bits.
unsigned popcount() const {
if (isSingleWord())
return llvm::popcount(U.VAL);
return countPopulationSlowCase();
}
LLVM_DEPRECATED("use popcount instead", "popcount")
unsigned countPopulation() const { return popcount(); }
/// @}
/// \name Conversion Functions
/// @{
void print(raw_ostream &OS, bool isSigned) const;
/// Converts an APInt to a string and append it to Str. Str is commonly a
/// SmallString. If Radix > 10, UpperCase determine the case of letter
/// digits.
void toString(SmallVectorImpl<char> &Str, unsigned Radix, bool Signed,
bool formatAsCLiteral = false, bool UpperCase = true) const;
/// Considers the APInt to be unsigned and converts it into a string in the
/// radix given. The radix can be 2, 8, 10 16, or 36.
void toStringUnsigned(SmallVectorImpl<char> &Str, unsigned Radix = 10) const {
toString(Str, Radix, false, false);
}
/// Considers the APInt to be signed and converts it into a string in the
/// radix given. The radix can be 2, 8, 10, 16, or 36.
void toStringSigned(SmallVectorImpl<char> &Str, unsigned Radix = 10) const {
toString(Str, Radix, true, false);
}
/// \returns a byte-swapped representation of this APInt Value.
APInt byteSwap() const;
/// \returns the value with the bit representation reversed of this APInt
/// Value.
APInt reverseBits() const;
/// Converts this APInt to a double value.
double roundToDouble(bool isSigned) const;
/// Converts this unsigned APInt to a double value.
double roundToDouble() const { return roundToDouble(false); }
/// Converts this signed APInt to a double value.
double signedRoundToDouble() const { return roundToDouble(true); }
/// Converts APInt bits to a double
///
/// The conversion does not do a translation from integer to double, it just
/// re-interprets the bits as a double. Note that it is valid to do this on
/// any bit width. Exactly 64 bits will be translated.
double bitsToDouble() const { return llvm::bit_cast<double>(getWord(0)); }
/// Converts APInt bits to a float
///
/// The conversion does not do a translation from integer to float, it just
/// re-interprets the bits as a float. Note that it is valid to do this on
/// any bit width. Exactly 32 bits will be translated.
float bitsToFloat() const {
return llvm::bit_cast<float>(static_cast<uint32_t>(getWord(0)));
}
/// Converts a double to APInt bits.
///
/// The conversion does not do a translation from double to integer, it just
/// re-interprets the bits of the double.
static APInt doubleToBits(double V) {
return APInt(sizeof(double) * CHAR_BIT, llvm::bit_cast<uint64_t>(V));
}
/// Converts a float to APInt bits.
///
/// The conversion does not do a translation from float to integer, it just
/// re-interprets the bits of the float.
static APInt floatToBits(float V) {
return APInt(sizeof(float) * CHAR_BIT, llvm::bit_cast<uint32_t>(V));
}
/// @}
/// \name Mathematics Operations
/// @{
/// \returns the floor log base 2 of this APInt.
unsigned logBase2() const { return getActiveBits() - 1; }
/// \returns the ceil log base 2 of this APInt.
unsigned ceilLogBase2() const {
APInt temp(*this);
--temp;
return temp.getActiveBits();
}
/// \returns the nearest log base 2 of this APInt. Ties round up.
///
/// NOTE: When we have a BitWidth of 1, we define:
///
/// log2(0) = UINT32_MAX
/// log2(1) = 0
///
/// to get around any mathematical concerns resulting from
/// referencing 2 in a space where 2 does no exist.
unsigned nearestLogBase2() const;
/// \returns the log base 2 of this APInt if its an exact power of two, -1
/// otherwise
int32_t exactLogBase2() const {
if (!isPowerOf2())
return -1;
return logBase2();
}
/// Compute the square root.
APInt sqrt() const;
/// Get the absolute value. If *this is < 0 then return -(*this), otherwise
/// *this. Note that the "most negative" signed number (e.g. -128 for 8 bit
/// wide APInt) is unchanged due to how negation works.
APInt abs() const {
if (isNegative())
return -(*this);
return *this;
}
/// \returns the multiplicative inverse for a given modulo.
APInt multiplicativeInverse(const APInt &modulo) const;
/// @}
/// \name Building-block Operations for APInt and APFloat
/// @{
// These building block operations operate on a representation of arbitrary
// precision, two's-complement, bignum integer values. They should be
// sufficient to implement APInt and APFloat bignum requirements. Inputs are
// generally a pointer to the base of an array of integer parts, representing
// an unsigned bignum, and a count of how many parts there are.
/// Sets the least significant part of a bignum to the input value, and zeroes
/// out higher parts.
static void tcSet(WordType *, WordType, unsigned);
/// Assign one bignum to another.
static void tcAssign(WordType *, const WordType *, unsigned);
/// Returns true if a bignum is zero, false otherwise.
static bool tcIsZero(const WordType *, unsigned);
/// Extract the given bit of a bignum; returns 0 or 1. Zero-based.
static int tcExtractBit(const WordType *, unsigned bit);
/// Copy the bit vector of width srcBITS from SRC, starting at bit srcLSB, to
/// DST, of dstCOUNT parts, such that the bit srcLSB becomes the least
/// significant bit of DST. All high bits above srcBITS in DST are
/// zero-filled.
static void tcExtract(WordType *, unsigned dstCount, const WordType *,
unsigned srcBits, unsigned srcLSB);
/// Set the given bit of a bignum. Zero-based.
static void tcSetBit(WordType *, unsigned bit);
/// Clear the given bit of a bignum. Zero-based.
static void tcClearBit(WordType *, unsigned bit);
/// Returns the bit number of the least or most significant set bit of a
/// number. If the input number has no bits set -1U is returned.
static unsigned tcLSB(const WordType *, unsigned n);
static unsigned tcMSB(const WordType *parts, unsigned n);
/// Negate a bignum in-place.
static void tcNegate(WordType *, unsigned);
/// DST += RHS + CARRY where CARRY is zero or one. Returns the carry flag.
static WordType tcAdd(WordType *, const WordType *, WordType carry, unsigned);
/// DST += RHS. Returns the carry flag.
static WordType tcAddPart(WordType *, WordType, unsigned);
/// DST -= RHS + CARRY where CARRY is zero or one. Returns the carry flag.
static WordType tcSubtract(WordType *, const WordType *, WordType carry,
unsigned);
/// DST -= RHS. Returns the carry flag.
static WordType tcSubtractPart(WordType *, WordType, unsigned);
/// DST += SRC * MULTIPLIER + PART if add is true
/// DST = SRC * MULTIPLIER + PART if add is false
///
/// Requires 0 <= DSTPARTS <= SRCPARTS + 1. If DST overlaps SRC they must
/// start at the same point, i.e. DST == SRC.
///
/// If DSTPARTS == SRC_PARTS + 1 no overflow occurs and zero is returned.
/// Otherwise DST is filled with the least significant DSTPARTS parts of the
/// result, and if all of the omitted higher parts were zero return zero,
/// otherwise overflow occurred and return one.
static int tcMultiplyPart(WordType *dst, const WordType *src,
WordType multiplier, WordType carry,
unsigned srcParts, unsigned dstParts, bool add);
/// DST = LHS * RHS, where DST has the same width as the operands and is
/// filled with the least significant parts of the result. Returns one if
/// overflow occurred, otherwise zero. DST must be disjoint from both
/// operands.
static int tcMultiply(WordType *, const WordType *, const WordType *,
unsigned);
/// DST = LHS * RHS, where DST has width the sum of the widths of the
/// operands. No overflow occurs. DST must be disjoint from both operands.
static void tcFullMultiply(WordType *, const WordType *, const WordType *,
unsigned, unsigned);
/// If RHS is zero LHS and REMAINDER are left unchanged, return one.
/// Otherwise set LHS to LHS / RHS with the fractional part discarded, set
/// REMAINDER to the remainder, return zero. i.e.
///
/// OLD_LHS = RHS * LHS + REMAINDER
///
/// SCRATCH is a bignum of the same size as the operands and result for use by
/// the routine; its contents need not be initialized and are destroyed. LHS,
/// REMAINDER and SCRATCH must be distinct.
static int tcDivide(WordType *lhs, const WordType *rhs, WordType *remainder,
WordType *scratch, unsigned parts);
/// Shift a bignum left Count bits. Shifted in bits are zero. There are no
/// restrictions on Count.
static void tcShiftLeft(WordType *, unsigned Words, unsigned Count);
/// Shift a bignum right Count bits. Shifted in bits are zero. There are no
/// restrictions on Count.
static void tcShiftRight(WordType *, unsigned Words, unsigned Count);
/// Comparison (unsigned) of two bignums.
static int tcCompare(const WordType *, const WordType *, unsigned);
/// Increment a bignum in-place. Return the carry flag.
static WordType tcIncrement(WordType *dst, unsigned parts) {
return tcAddPart(dst, 1, parts);
}
/// Decrement a bignum in-place. Return the borrow flag.
static WordType tcDecrement(WordType *dst, unsigned parts) {
return tcSubtractPart(dst, 1, parts);
}
/// Used to insert APInt objects, or objects that contain APInt objects, into
/// FoldingSets.
void Profile(FoldingSetNodeID &id) const;
/// debug method
void dump() const;
/// Returns whether this instance allocated memory.
bool needsCleanup() const { return !isSingleWord(); }
private:
/// This union is used to store the integer value. When the
/// integer bit-width <= 64, it uses VAL, otherwise it uses pVal.
union {
uint64_t VAL; ///< Used to store the <= 64 bits integer value.
uint64_t *pVal; ///< Used to store the >64 bits integer value.
} U;
unsigned BitWidth = 1; ///< The number of bits in this APInt.
friend struct DenseMapInfo<APInt, void>;
friend class APSInt;
/// This constructor is used only internally for speed of construction of
/// temporaries. It is unsafe since it takes ownership of the pointer, so it
/// is not public.
APInt(uint64_t *val, unsigned bits) : BitWidth(bits) { U.pVal = val; }
/// Determine which word a bit is in.
///
/// \returns the word position for the specified bit position.
static unsigned whichWord(unsigned bitPosition) {
return bitPosition / APINT_BITS_PER_WORD;
}
/// Determine which bit in a word the specified bit position is in.
static unsigned whichBit(unsigned bitPosition) {
return bitPosition % APINT_BITS_PER_WORD;
}
/// Get a single bit mask.
///
/// \returns a uint64_t with only bit at "whichBit(bitPosition)" set
/// This method generates and returns a uint64_t (word) mask for a single
/// bit at a specific bit position. This is used to mask the bit in the
/// corresponding word.
static uint64_t maskBit(unsigned bitPosition) {
return 1ULL << whichBit(bitPosition);
}
/// Clear unused high order bits
///
/// This method is used internally to clear the top "N" bits in the high order
/// word that are not used by the APInt. This is needed after the most
/// significant word is assigned a value to ensure that those bits are
/// zero'd out.
APInt &clearUnusedBits() {
// Compute how many bits are used in the final word.
unsigned WordBits = ((BitWidth - 1) % APINT_BITS_PER_WORD) + 1;
// Mask out the high bits.
uint64_t mask = WORDTYPE_MAX >> (APINT_BITS_PER_WORD - WordBits);
if (LLVM_UNLIKELY(BitWidth == 0))
mask = 0;
if (isSingleWord())
U.VAL &= mask;
else
U.pVal[getNumWords() - 1] &= mask;
return *this;
}
/// Get the word corresponding to a bit position
/// \returns the corresponding word for the specified bit position.
uint64_t getWord(unsigned bitPosition) const {
return isSingleWord() ? U.VAL : U.pVal[whichWord(bitPosition)];
}
/// Utility method to change the bit width of this APInt to new bit width,
/// allocating and/or deallocating as necessary. There is no guarantee on the
/// value of any bits upon return. Caller should populate the bits after.
void reallocate(unsigned NewBitWidth);
/// Convert a char array into an APInt
///
/// \param radix 2, 8, 10, 16, or 36
/// Converts a string into a number. The string must be non-empty
/// and well-formed as a number of the given base. The bit-width
/// must be sufficient to hold the result.
///
/// This is used by the constructors that take string arguments.
///
/// StringRef::getAsInteger is superficially similar but (1) does
/// not assume that the string is well-formed and (2) grows the
/// result to hold the input.
void fromString(unsigned numBits, StringRef str, uint8_t radix);
/// An internal division function for dividing APInts.
///
/// This is used by the toString method to divide by the radix. It simply
/// provides a more convenient form of divide for internal use since KnuthDiv
/// has specific constraints on its inputs. If those constraints are not met
/// then it provides a simpler form of divide.
static void divide(const WordType *LHS, unsigned lhsWords,
const WordType *RHS, unsigned rhsWords, WordType *Quotient,
WordType *Remainder);
/// out-of-line slow case for inline constructor
void initSlowCase(uint64_t val, bool isSigned);
/// shared code between two array constructors
void initFromArray(ArrayRef<uint64_t> array);
/// out-of-line slow case for inline copy constructor
void initSlowCase(const APInt &that);
/// out-of-line slow case for shl
void shlSlowCase(unsigned ShiftAmt);
/// out-of-line slow case for lshr.
void lshrSlowCase(unsigned ShiftAmt);
/// out-of-line slow case for ashr.
void ashrSlowCase(unsigned ShiftAmt);
/// out-of-line slow case for operator=
void assignSlowCase(const APInt &RHS);
/// out-of-line slow case for operator==
bool equalSlowCase(const APInt &RHS) const LLVM_READONLY;
/// out-of-line slow case for countLeadingZeros
unsigned countLeadingZerosSlowCase() const LLVM_READONLY;
/// out-of-line slow case for countLeadingOnes.
unsigned countLeadingOnesSlowCase() const LLVM_READONLY;
/// out-of-line slow case for countTrailingZeros.
unsigned countTrailingZerosSlowCase() const LLVM_READONLY;
/// out-of-line slow case for countTrailingOnes
unsigned countTrailingOnesSlowCase() const LLVM_READONLY;
/// out-of-line slow case for countPopulation
unsigned countPopulationSlowCase() const LLVM_READONLY;
/// out-of-line slow case for intersects.
bool intersectsSlowCase(const APInt &RHS) const LLVM_READONLY;
/// out-of-line slow case for isSubsetOf.
bool isSubsetOfSlowCase(const APInt &RHS) const LLVM_READONLY;
/// out-of-line slow case for setBits.
void setBitsSlowCase(unsigned loBit, unsigned hiBit);
/// out-of-line slow case for flipAllBits.
void flipAllBitsSlowCase();
/// out-of-line slow case for concat.
APInt concatSlowCase(const APInt &NewLSB) const;
/// out-of-line slow case for operator&=.
void andAssignSlowCase(const APInt &RHS);
/// out-of-line slow case for operator|=.
void orAssignSlowCase(const APInt &RHS);
/// out-of-line slow case for operator^=.
void xorAssignSlowCase(const APInt &RHS);
/// Unsigned comparison. Returns -1, 0, or 1 if this APInt is less than, equal
/// to, or greater than RHS.
int compare(const APInt &RHS) const LLVM_READONLY;
/// Signed comparison. Returns -1, 0, or 1 if this APInt is less than, equal
/// to, or greater than RHS.
int compareSigned(const APInt &RHS) const LLVM_READONLY;
/// @}
};
inline bool operator==(uint64_t V1, const APInt &V2) { return V2 == V1; }
inline bool operator!=(uint64_t V1, const APInt &V2) { return V2 != V1; }
/// Unary bitwise complement operator.
///
/// \returns an APInt that is the bitwise complement of \p v.
inline APInt operator~(APInt v) {
v.flipAllBits();
return v;
}
inline APInt operator&(APInt a, const APInt &b) {
a &= b;
return a;
}
inline APInt operator&(const APInt &a, APInt &&b) {
b &= a;
return std::move(b);
}
inline APInt operator&(APInt a, uint64_t RHS) {
a &= RHS;
return a;
}
inline APInt operator&(uint64_t LHS, APInt b) {
b &= LHS;
return b;
}
inline APInt operator|(APInt a, const APInt &b) {
a |= b;
return a;
}
inline APInt operator|(const APInt &a, APInt &&b) {
b |= a;
return std::move(b);
}
inline APInt operator|(APInt a, uint64_t RHS) {
a |= RHS;
return a;
}
inline APInt operator|(uint64_t LHS, APInt b) {
b |= LHS;
return b;
}
inline APInt operator^(APInt a, const APInt &b) {
a ^= b;
return a;
}
inline APInt operator^(const APInt &a, APInt &&b) {
b ^= a;
return std::move(b);
}
inline APInt operator^(APInt a, uint64_t RHS) {
a ^= RHS;
return a;
}
inline APInt operator^(uint64_t LHS, APInt b) {
b ^= LHS;
return b;
}
inline raw_ostream &operator<<(raw_ostream &OS, const APInt &I) {
I.print(OS, true);
return OS;
}
inline APInt operator-(APInt v) {
v.negate();
return v;
}
inline APInt operator+(APInt a, const APInt &b) {
a += b;
return a;
}
inline APInt operator+(const APInt &a, APInt &&b) {
b += a;
return std::move(b);
}
inline APInt operator+(APInt a, uint64_t RHS) {
a += RHS;
return a;
}
inline APInt operator+(uint64_t LHS, APInt b) {
b += LHS;
return b;
}
inline APInt operator-(APInt a, const APInt &b) {
a -= b;
return a;
}
inline APInt operator-(const APInt &a, APInt &&b) {
b.negate();
b += a;
return std::move(b);
}
inline APInt operator-(APInt a, uint64_t RHS) {
a -= RHS;
return a;
}
inline APInt operator-(uint64_t LHS, APInt b) {
b.negate();
b += LHS;
return b;
}
inline APInt operator*(APInt a, uint64_t RHS) {
a *= RHS;
return a;
}
inline APInt operator*(uint64_t LHS, APInt b) {
b *= LHS;
return b;
}
namespace APIntOps {
/// Determine the smaller of two APInts considered to be signed.
inline const APInt &smin(const APInt &A, const APInt &B) {
return A.slt(B) ? A : B;
}
/// Determine the larger of two APInts considered to be signed.
inline const APInt &smax(const APInt &A, const APInt &B) {
return A.sgt(B) ? A : B;
}
/// Determine the smaller of two APInts considered to be unsigned.
inline const APInt &umin(const APInt &A, const APInt &B) {
return A.ult(B) ? A : B;
}
/// Determine the larger of two APInts considered to be unsigned.
inline const APInt &umax(const APInt &A, const APInt &B) {
return A.ugt(B) ? A : B;
}
/// Compute GCD of two unsigned APInt values.
///
/// This function returns the greatest common divisor of the two APInt values
/// using Stein's algorithm.
///
/// \returns the greatest common divisor of A and B.
APInt GreatestCommonDivisor(APInt A, APInt B);
/// Converts the given APInt to a double value.
///
/// Treats the APInt as an unsigned value for conversion purposes.
inline double RoundAPIntToDouble(const APInt &APIVal) {
return APIVal.roundToDouble();
}
/// Converts the given APInt to a double value.
///
/// Treats the APInt as a signed value for conversion purposes.
inline double RoundSignedAPIntToDouble(const APInt &APIVal) {
return APIVal.signedRoundToDouble();
}
/// Converts the given APInt to a float value.
inline float RoundAPIntToFloat(const APInt &APIVal) {
return float(RoundAPIntToDouble(APIVal));
}
/// Converts the given APInt to a float value.
///
/// Treats the APInt as a signed value for conversion purposes.
inline float RoundSignedAPIntToFloat(const APInt &APIVal) {
return float(APIVal.signedRoundToDouble());
}
/// Converts the given double value into a APInt.
///
/// This function convert a double value to an APInt value.
APInt RoundDoubleToAPInt(double Double, unsigned width);
/// Converts a float value into a APInt.
///
/// Converts a float value into an APInt value.
inline APInt RoundFloatToAPInt(float Float, unsigned width) {
return RoundDoubleToAPInt(double(Float), width);
}
/// Return A unsign-divided by B, rounded by the given rounding mode.
APInt RoundingUDiv(const APInt &A, const APInt &B, APInt::Rounding RM);
/// Return A sign-divided by B, rounded by the given rounding mode.
APInt RoundingSDiv(const APInt &A, const APInt &B, APInt::Rounding RM);
/// Let q(n) = An^2 + Bn + C, and BW = bit width of the value range
/// (e.g. 32 for i32).
/// This function finds the smallest number n, such that
/// (a) n >= 0 and q(n) = 0, or
/// (b) n >= 1 and q(n-1) and q(n), when evaluated in the set of all
/// integers, belong to two different intervals [Rk, Rk+R),
/// where R = 2^BW, and k is an integer.
/// The idea here is to find when q(n) "overflows" 2^BW, while at the
/// same time "allowing" subtraction. In unsigned modulo arithmetic a
/// subtraction (treated as addition of negated numbers) would always
/// count as an overflow, but here we want to allow values to decrease
/// and increase as long as they are within the same interval.
/// Specifically, adding of two negative numbers should not cause an
/// overflow (as long as the magnitude does not exceed the bit width).
/// On the other hand, given a positive number, adding a negative
/// number to it can give a negative result, which would cause the
/// value to go from [-2^BW, 0) to [0, 2^BW). In that sense, zero is
/// treated as a special case of an overflow.
///
/// This function returns std::nullopt if after finding k that minimizes the
/// positive solution to q(n) = kR, both solutions are contained between
/// two consecutive integers.
///
/// There are cases where q(n) > T, and q(n+1) < T (assuming evaluation
/// in arithmetic modulo 2^BW, and treating the values as signed) by the
/// virtue of *signed* overflow. This function will *not* find such an n,
/// however it may find a value of n satisfying the inequalities due to
/// an *unsigned* overflow (if the values are treated as unsigned).
/// To find a solution for a signed overflow, treat it as a problem of
/// finding an unsigned overflow with a range with of BW-1.
///
/// The returned value may have a different bit width from the input
/// coefficients.
std::optional<APInt> SolveQuadraticEquationWrap(APInt A, APInt B, APInt C,
unsigned RangeWidth);
/// Compare two values, and if they are different, return the position of the
/// most significant bit that is different in the values.
std::optional<unsigned> GetMostSignificantDifferentBit(const APInt &A,
const APInt &B);
/// Splat/Merge neighboring bits to widen/narrow the bitmask represented
/// by \param A to \param NewBitWidth bits.
///
/// MatchAnyBits: (Default)
/// e.g. ScaleBitMask(0b0101, 8) -> 0b00110011
/// e.g. ScaleBitMask(0b00011011, 4) -> 0b0111
///
/// MatchAllBits:
/// e.g. ScaleBitMask(0b0101, 8) -> 0b00110011
/// e.g. ScaleBitMask(0b00011011, 4) -> 0b0001
/// A.getBitwidth() or NewBitWidth must be a whole multiples of the other.
APInt ScaleBitMask(const APInt &A, unsigned NewBitWidth,
bool MatchAllBits = false);
} // namespace APIntOps
// See friend declaration above. This additional declaration is required in
// order to compile LLVM with IBM xlC compiler.
hash_code hash_value(const APInt &Arg);
/// StoreIntToMemory - Fills the StoreBytes bytes of memory starting from Dst
/// with the integer held in IntVal.
void StoreIntToMemory(const APInt &IntVal, uint8_t *Dst, unsigned StoreBytes);
/// LoadIntFromMemory - Loads the integer stored in the LoadBytes bytes starting
/// from Src into IntVal, which is assumed to be wide enough and to hold zero.
void LoadIntFromMemory(APInt &IntVal, const uint8_t *Src, unsigned LoadBytes);
/// Provide DenseMapInfo for APInt.
template <> struct DenseMapInfo<APInt, void> {
static inline APInt getEmptyKey() {
APInt V(nullptr, 0);
V.U.VAL = ~0ULL;
return V;
}
static inline APInt getTombstoneKey() {
APInt V(nullptr, 0);
V.U.VAL = ~1ULL;
return V;
}
static unsigned getHashValue(const APInt &Key);
static bool isEqual(const APInt &LHS, const APInt &RHS) {
return LHS.getBitWidth() == RHS.getBitWidth() && LHS == RHS;
}
};
} // namespace llvm
#endif