| # NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py |
| # RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=znver2 -iterations=1500 -timeline -timeline-max-iterations=4 < %s | FileCheck %s |
| |
| # Each lzcnt has a false dependency on %ecx; the first lzcnt has to wait on the |
| # imul. However, the folded load can start immediately. |
| # The last lzcnt has a false dependency on %cx. However, even in this case, the |
| # folded load can start immediately. |
| |
| imul %edx, %ecx |
| lzcnt (%rsp), %cx |
| lzcnt 2(%rsp), %cx |
| |
| # CHECK: Iterations: 1500 |
| # CHECK-NEXT: Instructions: 4500 |
| # CHECK-NEXT: Total Cycles: 9003 |
| # CHECK-NEXT: Total uOps: 7500 |
| |
| # CHECK: Dispatch Width: 4 |
| # CHECK-NEXT: uOps Per Cycle: 0.83 |
| # CHECK-NEXT: IPC: 0.50 |
| # CHECK-NEXT: Block RThroughput: 1.3 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 3 1.00 imull %edx, %ecx |
| # CHECK-NEXT: 2 5 0.33 * lzcntw (%rsp), %cx |
| # CHECK-NEXT: 2 5 0.33 * lzcntw 2(%rsp), %cx |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - Zn2AGU0 |
| # CHECK-NEXT: [1] - Zn2AGU1 |
| # CHECK-NEXT: [2] - Zn2AGU2 |
| # CHECK-NEXT: [3] - Zn2ALU0 |
| # CHECK-NEXT: [4] - Zn2ALU1 |
| # CHECK-NEXT: [5] - Zn2ALU2 |
| # CHECK-NEXT: [6] - Zn2ALU3 |
| # CHECK-NEXT: [7] - Zn2Divider |
| # CHECK-NEXT: [8] - Zn2FPU0 |
| # CHECK-NEXT: [9] - Zn2FPU1 |
| # CHECK-NEXT: [10] - Zn2FPU2 |
| # CHECK-NEXT: [11] - Zn2FPU3 |
| # CHECK-NEXT: [12] - Zn2Multiplier |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] |
| # CHECK-NEXT: 0.67 0.67 0.67 0.67 1.00 0.67 0.67 - - - - - 1.00 |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] Instructions: |
| # CHECK-NEXT: - - - - 1.00 - - - - - - - 1.00 imull %edx, %ecx |
| # CHECK-NEXT: 0.33 0.33 0.33 0.33 - 0.33 0.33 - - - - - - lzcntw (%rsp), %cx |
| # CHECK-NEXT: 0.33 0.33 0.33 0.33 - 0.33 0.33 - - - - - - lzcntw 2(%rsp), %cx |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: 0123456789 |
| # CHECK-NEXT: Index 0123456789 0123456 |
| |
| # CHECK: [0,0] DeeeER . . . .. imull %edx, %ecx |
| # CHECK-NEXT: [0,1] DeeeeeER . . . .. lzcntw (%rsp), %cx |
| # CHECK-NEXT: [0,2] .DeeeeeER . . . .. lzcntw 2(%rsp), %cx |
| # CHECK-NEXT: [1,0] .D=====eeeER . . .. imull %edx, %ecx |
| # CHECK-NEXT: [1,1] . D====eeeeeER . . .. lzcntw (%rsp), %cx |
| # CHECK-NEXT: [1,2] . D=====eeeeeER. . .. lzcntw 2(%rsp), %cx |
| # CHECK-NEXT: [2,0] . D=========eeeER . .. imull %edx, %ecx |
| # CHECK-NEXT: [2,1] . D=========eeeeeER. .. lzcntw (%rsp), %cx |
| # CHECK-NEXT: [2,2] . D=========eeeeeER .. lzcntw 2(%rsp), %cx |
| # CHECK-NEXT: [3,0] . D==============eeeER .. imull %edx, %ecx |
| # CHECK-NEXT: [3,1] . D=============eeeeeER. lzcntw (%rsp), %cx |
| # CHECK-NEXT: [3,2] . D==============eeeeeER lzcntw 2(%rsp), %cx |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 4 8.0 0.3 0.0 imull %edx, %ecx |
| # CHECK-NEXT: 1. 4 7.5 0.0 0.0 lzcntw (%rsp), %cx |
| # CHECK-NEXT: 2. 4 8.0 0.0 0.0 lzcntw 2(%rsp), %cx |
| # CHECK-NEXT: 4 7.8 0.1 0.0 <total> |
