| # NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py |
| # RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=bdver2 -scheduler-stats -dispatch-stats -iterations=100 -timeline -timeline-max-iterations=1 < %s | FileCheck %s |
| |
| # LLVM-MCA-BEGIN |
| movb (%rax), %spl |
| movb (%rcx), %bpl |
| movb (%rdx), %sil |
| movb (%rbx), %dil |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| movw (%rax), %sp |
| movw (%rcx), %bp |
| movw (%rdx), %si |
| movw (%rbx), %di |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| movl (%rax), %esp |
| movl (%rcx), %ebp |
| movl (%rdx), %esi |
| movl (%rbx), %edi |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| movq (%rax), %rsp |
| movq (%rcx), %rbp |
| movq (%rdx), %rsi |
| movq (%rbx), %rdi |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| movd (%rax), %mm0 |
| movd (%rcx), %mm1 |
| movd (%rdx), %mm2 |
| movd (%rbx), %mm3 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| movaps (%rax), %xmm0 |
| movaps (%rcx), %xmm1 |
| movaps (%rdx), %xmm2 |
| movaps (%rbx), %xmm3 |
| # LLVM-MCA-END |
| |
| # LLVM-MCA-BEGIN |
| vmovaps (%rax), %ymm0 |
| vmovaps (%rcx), %ymm1 |
| vmovaps (%rdx), %ymm2 |
| vmovaps (%rbx), %ymm3 |
| # LLVM-MCA-END |
| |
| # CHECK: [0] Code Region |
| |
| # CHECK: Iterations: 100 |
| # CHECK-NEXT: Instructions: 400 |
| # CHECK-NEXT: Total Cycles: 406 |
| # CHECK-NEXT: Total uOps: 400 |
| |
| # CHECK: Dispatch Width: 4 |
| # CHECK-NEXT: uOps Per Cycle: 0.99 |
| # CHECK-NEXT: IPC: 0.99 |
| # CHECK-NEXT: Block RThroughput: 4.0 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 5 1.00 * movb (%rax), %spl |
| # CHECK-NEXT: 1 5 1.00 * movb (%rcx), %bpl |
| # CHECK-NEXT: 1 5 1.00 * movb (%rdx), %sil |
| # CHECK-NEXT: 1 5 1.00 * movb (%rbx), %dil |
| |
| # CHECK: Dynamic Dispatch Stall Cycles: |
| # CHECK-NEXT: RAT - Register unavailable: 0 |
| # CHECK-NEXT: RCU - Retire tokens unavailable: 0 |
| # CHECK-NEXT: SCHEDQ - Scheduler full: 0 |
| # CHECK-NEXT: LQ - Load queue full: 354 (87.2%) |
| # CHECK-NEXT: SQ - Store queue full: 0 |
| # CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0 |
| |
| # CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched: |
| # CHECK-NEXT: [# dispatched], [# cycles] |
| # CHECK-NEXT: 0, 217 (53.4%) |
| # CHECK-NEXT: 2, 178 (43.8%) |
| # CHECK-NEXT: 4, 11 (2.7%) |
| |
| # CHECK: Schedulers - number of cycles where we saw N micro opcodes issued: |
| # CHECK-NEXT: [# issued], [# cycles] |
| # CHECK-NEXT: 0, 206 (50.7%) |
| # CHECK-NEXT: 2, 200 (49.3%) |
| |
| # CHECK: Scheduler's queue usage: |
| # CHECK-NEXT: [1] Resource name. |
| # CHECK-NEXT: [2] Average number of used buffer entries. |
| # CHECK-NEXT: [3] Maximum number of used buffer entries. |
| # CHECK-NEXT: [4] Total number of buffer entries. |
| |
| # CHECK: [1] [2] [3] [4] |
| # CHECK-NEXT: PdEX 31 34 40 |
| # CHECK-NEXT: PdFPU 0 0 64 |
| # CHECK-NEXT: PdLoad 36 40 40 |
| # CHECK-NEXT: PdStore 0 0 24 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0.0] - PdAGLU01 |
| # CHECK-NEXT: [0.1] - PdAGLU01 |
| # CHECK-NEXT: [1] - PdBranch |
| # CHECK-NEXT: [2] - PdCount |
| # CHECK-NEXT: [3] - PdDiv |
| # CHECK-NEXT: [4] - PdEX0 |
| # CHECK-NEXT: [5] - PdEX1 |
| # CHECK-NEXT: [6] - PdFPCVT |
| # CHECK-NEXT: [7.0] - PdFPFMA |
| # CHECK-NEXT: [7.1] - PdFPFMA |
| # CHECK-NEXT: [8.0] - PdFPMAL |
| # CHECK-NEXT: [8.1] - PdFPMAL |
| # CHECK-NEXT: [9] - PdFPMMA |
| # CHECK-NEXT: [10] - PdFPSTO |
| # CHECK-NEXT: [11] - PdFPU0 |
| # CHECK-NEXT: [12] - PdFPU1 |
| # CHECK-NEXT: [13] - PdFPU2 |
| # CHECK-NEXT: [14] - PdFPU3 |
| # CHECK-NEXT: [15] - PdFPXBR |
| # CHECK-NEXT: [16.0] - PdLoad |
| # CHECK-NEXT: [16.1] - PdLoad |
| # CHECK-NEXT: [17] - PdMul |
| # CHECK-NEXT: [18] - PdStore |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] |
| # CHECK-NEXT: 4.00 4.00 - - - - - - - - - - - - - - - - - 4.00 4.00 - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions: |
| # CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - movb (%rax), %spl |
| # CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - - movb (%rcx), %bpl |
| # CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - movb (%rdx), %sil |
| # CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - - movb (%rbx), %dil |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 0123456789 |
| |
| # CHECK: [0,0] DeeeeeER . movb (%rax), %spl |
| # CHECK-NEXT: [0,1] DeeeeeER . movb (%rcx), %bpl |
| # CHECK-NEXT: [0,2] D==eeeeeER movb (%rdx), %sil |
| # CHECK-NEXT: [0,3] D==eeeeeER movb (%rbx), %dil |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 1 1.0 1.0 0.0 movb (%rax), %spl |
| # CHECK-NEXT: 1. 1 1.0 1.0 0.0 movb (%rcx), %bpl |
| # CHECK-NEXT: 2. 1 3.0 3.0 0.0 movb (%rdx), %sil |
| # CHECK-NEXT: 3. 1 3.0 3.0 0.0 movb (%rbx), %dil |
| # CHECK-NEXT: 1 2.0 2.0 0.0 <total> |
| |
| # CHECK: [1] Code Region |
| |
| # CHECK: Iterations: 100 |
| # CHECK-NEXT: Instructions: 400 |
| # CHECK-NEXT: Total Cycles: 406 |
| # CHECK-NEXT: Total uOps: 400 |
| |
| # CHECK: Dispatch Width: 4 |
| # CHECK-NEXT: uOps Per Cycle: 0.99 |
| # CHECK-NEXT: IPC: 0.99 |
| # CHECK-NEXT: Block RThroughput: 4.0 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 5 1.00 * movw (%rax), %sp |
| # CHECK-NEXT: 1 5 1.00 * movw (%rcx), %bp |
| # CHECK-NEXT: 1 5 1.00 * movw (%rdx), %si |
| # CHECK-NEXT: 1 5 1.00 * movw (%rbx), %di |
| |
| # CHECK: Dynamic Dispatch Stall Cycles: |
| # CHECK-NEXT: RAT - Register unavailable: 0 |
| # CHECK-NEXT: RCU - Retire tokens unavailable: 0 |
| # CHECK-NEXT: SCHEDQ - Scheduler full: 0 |
| # CHECK-NEXT: LQ - Load queue full: 354 (87.2%) |
| # CHECK-NEXT: SQ - Store queue full: 0 |
| # CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0 |
| |
| # CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched: |
| # CHECK-NEXT: [# dispatched], [# cycles] |
| # CHECK-NEXT: 0, 217 (53.4%) |
| # CHECK-NEXT: 2, 178 (43.8%) |
| # CHECK-NEXT: 4, 11 (2.7%) |
| |
| # CHECK: Schedulers - number of cycles where we saw N micro opcodes issued: |
| # CHECK-NEXT: [# issued], [# cycles] |
| # CHECK-NEXT: 0, 206 (50.7%) |
| # CHECK-NEXT: 2, 200 (49.3%) |
| |
| # CHECK: Scheduler's queue usage: |
| # CHECK-NEXT: [1] Resource name. |
| # CHECK-NEXT: [2] Average number of used buffer entries. |
| # CHECK-NEXT: [3] Maximum number of used buffer entries. |
| # CHECK-NEXT: [4] Total number of buffer entries. |
| |
| # CHECK: [1] [2] [3] [4] |
| # CHECK-NEXT: PdEX 31 34 40 |
| # CHECK-NEXT: PdFPU 0 0 64 |
| # CHECK-NEXT: PdLoad 36 40 40 |
| # CHECK-NEXT: PdStore 0 0 24 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0.0] - PdAGLU01 |
| # CHECK-NEXT: [0.1] - PdAGLU01 |
| # CHECK-NEXT: [1] - PdBranch |
| # CHECK-NEXT: [2] - PdCount |
| # CHECK-NEXT: [3] - PdDiv |
| # CHECK-NEXT: [4] - PdEX0 |
| # CHECK-NEXT: [5] - PdEX1 |
| # CHECK-NEXT: [6] - PdFPCVT |
| # CHECK-NEXT: [7.0] - PdFPFMA |
| # CHECK-NEXT: [7.1] - PdFPFMA |
| # CHECK-NEXT: [8.0] - PdFPMAL |
| # CHECK-NEXT: [8.1] - PdFPMAL |
| # CHECK-NEXT: [9] - PdFPMMA |
| # CHECK-NEXT: [10] - PdFPSTO |
| # CHECK-NEXT: [11] - PdFPU0 |
| # CHECK-NEXT: [12] - PdFPU1 |
| # CHECK-NEXT: [13] - PdFPU2 |
| # CHECK-NEXT: [14] - PdFPU3 |
| # CHECK-NEXT: [15] - PdFPXBR |
| # CHECK-NEXT: [16.0] - PdLoad |
| # CHECK-NEXT: [16.1] - PdLoad |
| # CHECK-NEXT: [17] - PdMul |
| # CHECK-NEXT: [18] - PdStore |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] |
| # CHECK-NEXT: 4.00 4.00 - - - - - - - - - - - - - - - - - 4.00 4.00 - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions: |
| # CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - movw (%rax), %sp |
| # CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - - movw (%rcx), %bp |
| # CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - movw (%rdx), %si |
| # CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - - movw (%rbx), %di |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 0123456789 |
| |
| # CHECK: [0,0] DeeeeeER . movw (%rax), %sp |
| # CHECK-NEXT: [0,1] DeeeeeER . movw (%rcx), %bp |
| # CHECK-NEXT: [0,2] D==eeeeeER movw (%rdx), %si |
| # CHECK-NEXT: [0,3] D==eeeeeER movw (%rbx), %di |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 1 1.0 1.0 0.0 movw (%rax), %sp |
| # CHECK-NEXT: 1. 1 1.0 1.0 0.0 movw (%rcx), %bp |
| # CHECK-NEXT: 2. 1 3.0 3.0 0.0 movw (%rdx), %si |
| # CHECK-NEXT: 3. 1 3.0 3.0 0.0 movw (%rbx), %di |
| # CHECK-NEXT: 1 2.0 2.0 0.0 <total> |
| |
| # CHECK: [2] Code Region |
| |
| # CHECK: Iterations: 100 |
| # CHECK-NEXT: Instructions: 400 |
| # CHECK-NEXT: Total Cycles: 406 |
| # CHECK-NEXT: Total uOps: 400 |
| |
| # CHECK: Dispatch Width: 4 |
| # CHECK-NEXT: uOps Per Cycle: 0.99 |
| # CHECK-NEXT: IPC: 0.99 |
| # CHECK-NEXT: Block RThroughput: 4.0 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 5 1.00 * movl (%rax), %esp |
| # CHECK-NEXT: 1 5 1.00 * movl (%rcx), %ebp |
| # CHECK-NEXT: 1 5 1.00 * movl (%rdx), %esi |
| # CHECK-NEXT: 1 5 1.00 * movl (%rbx), %edi |
| |
| # CHECK: Dynamic Dispatch Stall Cycles: |
| # CHECK-NEXT: RAT - Register unavailable: 0 |
| # CHECK-NEXT: RCU - Retire tokens unavailable: 0 |
| # CHECK-NEXT: SCHEDQ - Scheduler full: 0 |
| # CHECK-NEXT: LQ - Load queue full: 354 (87.2%) |
| # CHECK-NEXT: SQ - Store queue full: 0 |
| # CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0 |
| |
| # CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched: |
| # CHECK-NEXT: [# dispatched], [# cycles] |
| # CHECK-NEXT: 0, 217 (53.4%) |
| # CHECK-NEXT: 2, 178 (43.8%) |
| # CHECK-NEXT: 4, 11 (2.7%) |
| |
| # CHECK: Schedulers - number of cycles where we saw N micro opcodes issued: |
| # CHECK-NEXT: [# issued], [# cycles] |
| # CHECK-NEXT: 0, 206 (50.7%) |
| # CHECK-NEXT: 2, 200 (49.3%) |
| |
| # CHECK: Scheduler's queue usage: |
| # CHECK-NEXT: [1] Resource name. |
| # CHECK-NEXT: [2] Average number of used buffer entries. |
| # CHECK-NEXT: [3] Maximum number of used buffer entries. |
| # CHECK-NEXT: [4] Total number of buffer entries. |
| |
| # CHECK: [1] [2] [3] [4] |
| # CHECK-NEXT: PdEX 31 34 40 |
| # CHECK-NEXT: PdFPU 0 0 64 |
| # CHECK-NEXT: PdLoad 36 40 40 |
| # CHECK-NEXT: PdStore 0 0 24 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0.0] - PdAGLU01 |
| # CHECK-NEXT: [0.1] - PdAGLU01 |
| # CHECK-NEXT: [1] - PdBranch |
| # CHECK-NEXT: [2] - PdCount |
| # CHECK-NEXT: [3] - PdDiv |
| # CHECK-NEXT: [4] - PdEX0 |
| # CHECK-NEXT: [5] - PdEX1 |
| # CHECK-NEXT: [6] - PdFPCVT |
| # CHECK-NEXT: [7.0] - PdFPFMA |
| # CHECK-NEXT: [7.1] - PdFPFMA |
| # CHECK-NEXT: [8.0] - PdFPMAL |
| # CHECK-NEXT: [8.1] - PdFPMAL |
| # CHECK-NEXT: [9] - PdFPMMA |
| # CHECK-NEXT: [10] - PdFPSTO |
| # CHECK-NEXT: [11] - PdFPU0 |
| # CHECK-NEXT: [12] - PdFPU1 |
| # CHECK-NEXT: [13] - PdFPU2 |
| # CHECK-NEXT: [14] - PdFPU3 |
| # CHECK-NEXT: [15] - PdFPXBR |
| # CHECK-NEXT: [16.0] - PdLoad |
| # CHECK-NEXT: [16.1] - PdLoad |
| # CHECK-NEXT: [17] - PdMul |
| # CHECK-NEXT: [18] - PdStore |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] |
| # CHECK-NEXT: 4.00 4.00 - - - - - - - - - - - - - - - - - 4.00 4.00 - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions: |
| # CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - movl (%rax), %esp |
| # CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - - movl (%rcx), %ebp |
| # CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - movl (%rdx), %esi |
| # CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - - movl (%rbx), %edi |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 0123456789 |
| |
| # CHECK: [0,0] DeeeeeER . movl (%rax), %esp |
| # CHECK-NEXT: [0,1] DeeeeeER . movl (%rcx), %ebp |
| # CHECK-NEXT: [0,2] D==eeeeeER movl (%rdx), %esi |
| # CHECK-NEXT: [0,3] D==eeeeeER movl (%rbx), %edi |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 1 1.0 1.0 0.0 movl (%rax), %esp |
| # CHECK-NEXT: 1. 1 1.0 1.0 0.0 movl (%rcx), %ebp |
| # CHECK-NEXT: 2. 1 3.0 3.0 0.0 movl (%rdx), %esi |
| # CHECK-NEXT: 3. 1 3.0 3.0 0.0 movl (%rbx), %edi |
| # CHECK-NEXT: 1 2.0 2.0 0.0 <total> |
| |
| # CHECK: [3] Code Region |
| |
| # CHECK: Iterations: 100 |
| # CHECK-NEXT: Instructions: 400 |
| # CHECK-NEXT: Total Cycles: 406 |
| # CHECK-NEXT: Total uOps: 400 |
| |
| # CHECK: Dispatch Width: 4 |
| # CHECK-NEXT: uOps Per Cycle: 0.99 |
| # CHECK-NEXT: IPC: 0.99 |
| # CHECK-NEXT: Block RThroughput: 4.0 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 5 1.00 * movq (%rax), %rsp |
| # CHECK-NEXT: 1 5 1.00 * movq (%rcx), %rbp |
| # CHECK-NEXT: 1 5 1.00 * movq (%rdx), %rsi |
| # CHECK-NEXT: 1 5 1.00 * movq (%rbx), %rdi |
| |
| # CHECK: Dynamic Dispatch Stall Cycles: |
| # CHECK-NEXT: RAT - Register unavailable: 0 |
| # CHECK-NEXT: RCU - Retire tokens unavailable: 0 |
| # CHECK-NEXT: SCHEDQ - Scheduler full: 0 |
| # CHECK-NEXT: LQ - Load queue full: 354 (87.2%) |
| # CHECK-NEXT: SQ - Store queue full: 0 |
| # CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0 |
| |
| # CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched: |
| # CHECK-NEXT: [# dispatched], [# cycles] |
| # CHECK-NEXT: 0, 217 (53.4%) |
| # CHECK-NEXT: 2, 178 (43.8%) |
| # CHECK-NEXT: 4, 11 (2.7%) |
| |
| # CHECK: Schedulers - number of cycles where we saw N micro opcodes issued: |
| # CHECK-NEXT: [# issued], [# cycles] |
| # CHECK-NEXT: 0, 206 (50.7%) |
| # CHECK-NEXT: 2, 200 (49.3%) |
| |
| # CHECK: Scheduler's queue usage: |
| # CHECK-NEXT: [1] Resource name. |
| # CHECK-NEXT: [2] Average number of used buffer entries. |
| # CHECK-NEXT: [3] Maximum number of used buffer entries. |
| # CHECK-NEXT: [4] Total number of buffer entries. |
| |
| # CHECK: [1] [2] [3] [4] |
| # CHECK-NEXT: PdEX 31 34 40 |
| # CHECK-NEXT: PdFPU 0 0 64 |
| # CHECK-NEXT: PdLoad 36 40 40 |
| # CHECK-NEXT: PdStore 0 0 24 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0.0] - PdAGLU01 |
| # CHECK-NEXT: [0.1] - PdAGLU01 |
| # CHECK-NEXT: [1] - PdBranch |
| # CHECK-NEXT: [2] - PdCount |
| # CHECK-NEXT: [3] - PdDiv |
| # CHECK-NEXT: [4] - PdEX0 |
| # CHECK-NEXT: [5] - PdEX1 |
| # CHECK-NEXT: [6] - PdFPCVT |
| # CHECK-NEXT: [7.0] - PdFPFMA |
| # CHECK-NEXT: [7.1] - PdFPFMA |
| # CHECK-NEXT: [8.0] - PdFPMAL |
| # CHECK-NEXT: [8.1] - PdFPMAL |
| # CHECK-NEXT: [9] - PdFPMMA |
| # CHECK-NEXT: [10] - PdFPSTO |
| # CHECK-NEXT: [11] - PdFPU0 |
| # CHECK-NEXT: [12] - PdFPU1 |
| # CHECK-NEXT: [13] - PdFPU2 |
| # CHECK-NEXT: [14] - PdFPU3 |
| # CHECK-NEXT: [15] - PdFPXBR |
| # CHECK-NEXT: [16.0] - PdLoad |
| # CHECK-NEXT: [16.1] - PdLoad |
| # CHECK-NEXT: [17] - PdMul |
| # CHECK-NEXT: [18] - PdStore |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] |
| # CHECK-NEXT: 4.00 4.00 - - - - - - - - - - - - - - - - - 4.00 4.00 - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions: |
| # CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - movq (%rax), %rsp |
| # CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - - movq (%rcx), %rbp |
| # CHECK-NEXT: - 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - movq (%rdx), %rsi |
| # CHECK-NEXT: 2.00 - - - - - - - - - - - - - - - - - - 2.00 - - - movq (%rbx), %rdi |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 0123456789 |
| |
| # CHECK: [0,0] DeeeeeER . movq (%rax), %rsp |
| # CHECK-NEXT: [0,1] DeeeeeER . movq (%rcx), %rbp |
| # CHECK-NEXT: [0,2] D==eeeeeER movq (%rdx), %rsi |
| # CHECK-NEXT: [0,3] D==eeeeeER movq (%rbx), %rdi |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 1 1.0 1.0 0.0 movq (%rax), %rsp |
| # CHECK-NEXT: 1. 1 1.0 1.0 0.0 movq (%rcx), %rbp |
| # CHECK-NEXT: 2. 1 3.0 3.0 0.0 movq (%rdx), %rsi |
| # CHECK-NEXT: 3. 1 3.0 3.0 0.0 movq (%rbx), %rdi |
| # CHECK-NEXT: 1 2.0 2.0 0.0 <total> |
| |
| # CHECK: [4] Code Region |
| |
| # CHECK: Iterations: 100 |
| # CHECK-NEXT: Instructions: 400 |
| # CHECK-NEXT: Total Cycles: 605 |
| # CHECK-NEXT: Total uOps: 400 |
| |
| # CHECK: Dispatch Width: 4 |
| # CHECK-NEXT: uOps Per Cycle: 0.66 |
| # CHECK-NEXT: IPC: 0.66 |
| # CHECK-NEXT: Block RThroughput: 6.0 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 5 1.50 * movd (%rax), %mm0 |
| # CHECK-NEXT: 1 5 1.50 * movd (%rcx), %mm1 |
| # CHECK-NEXT: 1 5 1.50 * movd (%rdx), %mm2 |
| # CHECK-NEXT: 1 5 1.50 * movd (%rbx), %mm3 |
| |
| # CHECK: Dynamic Dispatch Stall Cycles: |
| # CHECK-NEXT: RAT - Register unavailable: 0 |
| # CHECK-NEXT: RCU - Retire tokens unavailable: 0 |
| # CHECK-NEXT: SCHEDQ - Scheduler full: 0 |
| # CHECK-NEXT: LQ - Load queue full: 533 (88.1%) |
| # CHECK-NEXT: SQ - Store queue full: 0 |
| # CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0 |
| |
| # CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched: |
| # CHECK-NEXT: [# dispatched], [# cycles] |
| # CHECK-NEXT: 0, 416 (68.8%) |
| # CHECK-NEXT: 2, 178 (29.4%) |
| # CHECK-NEXT: 4, 11 (1.8%) |
| |
| # CHECK: Schedulers - number of cycles where we saw N micro opcodes issued: |
| # CHECK-NEXT: [# issued], [# cycles] |
| # CHECK-NEXT: 0, 405 (66.9%) |
| # CHECK-NEXT: 2, 200 (33.1%) |
| |
| # CHECK: Scheduler's queue usage: |
| # CHECK-NEXT: [1] Resource name. |
| # CHECK-NEXT: [2] Average number of used buffer entries. |
| # CHECK-NEXT: [3] Maximum number of used buffer entries. |
| # CHECK-NEXT: [4] Total number of buffer entries. |
| |
| # CHECK: [1] [2] [3] [4] |
| # CHECK-NEXT: PdEX 33 36 40 |
| # CHECK-NEXT: PdFPU 33 36 64 |
| # CHECK-NEXT: PdLoad 37 40 40 |
| # CHECK-NEXT: PdStore 0 0 24 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0.0] - PdAGLU01 |
| # CHECK-NEXT: [0.1] - PdAGLU01 |
| # CHECK-NEXT: [1] - PdBranch |
| # CHECK-NEXT: [2] - PdCount |
| # CHECK-NEXT: [3] - PdDiv |
| # CHECK-NEXT: [4] - PdEX0 |
| # CHECK-NEXT: [5] - PdEX1 |
| # CHECK-NEXT: [6] - PdFPCVT |
| # CHECK-NEXT: [7.0] - PdFPFMA |
| # CHECK-NEXT: [7.1] - PdFPFMA |
| # CHECK-NEXT: [8.0] - PdFPMAL |
| # CHECK-NEXT: [8.1] - PdFPMAL |
| # CHECK-NEXT: [9] - PdFPMMA |
| # CHECK-NEXT: [10] - PdFPSTO |
| # CHECK-NEXT: [11] - PdFPU0 |
| # CHECK-NEXT: [12] - PdFPU1 |
| # CHECK-NEXT: [13] - PdFPU2 |
| # CHECK-NEXT: [14] - PdFPU3 |
| # CHECK-NEXT: [15] - PdFPXBR |
| # CHECK-NEXT: [16.0] - PdLoad |
| # CHECK-NEXT: [16.1] - PdLoad |
| # CHECK-NEXT: [17] - PdMul |
| # CHECK-NEXT: [18] - PdStore |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] |
| # CHECK-NEXT: 6.00 6.00 - - - - - - - - 6.00 6.00 - - 2.00 2.00 - - - 6.00 6.00 - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions: |
| # CHECK-NEXT: - 3.00 - - - - - - - - - 3.00 - - - 1.00 - - - - 3.00 - - movd (%rax), %mm0 |
| # CHECK-NEXT: 3.00 - - - - - - - - - 3.00 - - - 1.00 - - - - 3.00 - - - movd (%rcx), %mm1 |
| # CHECK-NEXT: - 3.00 - - - - - - - - - 3.00 - - - 1.00 - - - - 3.00 - - movd (%rdx), %mm2 |
| # CHECK-NEXT: 3.00 - - - - - - - - - 3.00 - - - 1.00 - - - - 3.00 - - - movd (%rbx), %mm3 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: 0 |
| # CHECK-NEXT: Index 0123456789 |
| |
| # CHECK: [0,0] DeeeeeER . movd (%rax), %mm0 |
| # CHECK-NEXT: [0,1] DeeeeeER . movd (%rcx), %mm1 |
| # CHECK-NEXT: [0,2] D===eeeeeER movd (%rdx), %mm2 |
| # CHECK-NEXT: [0,3] D===eeeeeER movd (%rbx), %mm3 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 1 1.0 1.0 0.0 movd (%rax), %mm0 |
| # CHECK-NEXT: 1. 1 1.0 1.0 0.0 movd (%rcx), %mm1 |
| # CHECK-NEXT: 2. 1 4.0 4.0 0.0 movd (%rdx), %mm2 |
| # CHECK-NEXT: 3. 1 4.0 4.0 0.0 movd (%rbx), %mm3 |
| # CHECK-NEXT: 1 2.5 2.5 0.0 <total> |
| |
| # CHECK: [5] Code Region |
| |
| # CHECK: Iterations: 100 |
| # CHECK-NEXT: Instructions: 400 |
| # CHECK-NEXT: Total Cycles: 605 |
| # CHECK-NEXT: Total uOps: 400 |
| |
| # CHECK: Dispatch Width: 4 |
| # CHECK-NEXT: uOps Per Cycle: 0.66 |
| # CHECK-NEXT: IPC: 0.66 |
| # CHECK-NEXT: Block RThroughput: 6.0 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 5 1.50 * movaps (%rax), %xmm0 |
| # CHECK-NEXT: 1 5 1.50 * movaps (%rcx), %xmm1 |
| # CHECK-NEXT: 1 5 1.50 * movaps (%rdx), %xmm2 |
| # CHECK-NEXT: 1 5 1.50 * movaps (%rbx), %xmm3 |
| |
| # CHECK: Dynamic Dispatch Stall Cycles: |
| # CHECK-NEXT: RAT - Register unavailable: 0 |
| # CHECK-NEXT: RCU - Retire tokens unavailable: 0 |
| # CHECK-NEXT: SCHEDQ - Scheduler full: 0 |
| # CHECK-NEXT: LQ - Load queue full: 533 (88.1%) |
| # CHECK-NEXT: SQ - Store queue full: 0 |
| # CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0 |
| |
| # CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched: |
| # CHECK-NEXT: [# dispatched], [# cycles] |
| # CHECK-NEXT: 0, 416 (68.8%) |
| # CHECK-NEXT: 2, 178 (29.4%) |
| # CHECK-NEXT: 4, 11 (1.8%) |
| |
| # CHECK: Schedulers - number of cycles where we saw N micro opcodes issued: |
| # CHECK-NEXT: [# issued], [# cycles] |
| # CHECK-NEXT: 0, 405 (66.9%) |
| # CHECK-NEXT: 2, 200 (33.1%) |
| |
| # CHECK: Scheduler's queue usage: |
| # CHECK-NEXT: [1] Resource name. |
| # CHECK-NEXT: [2] Average number of used buffer entries. |
| # CHECK-NEXT: [3] Maximum number of used buffer entries. |
| # CHECK-NEXT: [4] Total number of buffer entries. |
| |
| # CHECK: [1] [2] [3] [4] |
| # CHECK-NEXT: PdEX 33 36 40 |
| # CHECK-NEXT: PdFPU 33 36 64 |
| # CHECK-NEXT: PdLoad 37 40 40 |
| # CHECK-NEXT: PdStore 0 0 24 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0.0] - PdAGLU01 |
| # CHECK-NEXT: [0.1] - PdAGLU01 |
| # CHECK-NEXT: [1] - PdBranch |
| # CHECK-NEXT: [2] - PdCount |
| # CHECK-NEXT: [3] - PdDiv |
| # CHECK-NEXT: [4] - PdEX0 |
| # CHECK-NEXT: [5] - PdEX1 |
| # CHECK-NEXT: [6] - PdFPCVT |
| # CHECK-NEXT: [7.0] - PdFPFMA |
| # CHECK-NEXT: [7.1] - PdFPFMA |
| # CHECK-NEXT: [8.0] - PdFPMAL |
| # CHECK-NEXT: [8.1] - PdFPMAL |
| # CHECK-NEXT: [9] - PdFPMMA |
| # CHECK-NEXT: [10] - PdFPSTO |
| # CHECK-NEXT: [11] - PdFPU0 |
| # CHECK-NEXT: [12] - PdFPU1 |
| # CHECK-NEXT: [13] - PdFPU2 |
| # CHECK-NEXT: [14] - PdFPU3 |
| # CHECK-NEXT: [15] - PdFPXBR |
| # CHECK-NEXT: [16.0] - PdLoad |
| # CHECK-NEXT: [16.1] - PdLoad |
| # CHECK-NEXT: [17] - PdMul |
| # CHECK-NEXT: [18] - PdStore |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] |
| # CHECK-NEXT: 6.00 6.00 - - - - - - 6.00 6.00 - - - - 2.00 2.00 - - - 6.00 6.00 - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions: |
| # CHECK-NEXT: - 3.00 - - - - - - - 3.00 - - - - - 1.00 - - - - 3.00 - - movaps (%rax), %xmm0 |
| # CHECK-NEXT: 3.00 - - - - - - - 3.00 - - - - - 1.00 - - - - 3.00 - - - movaps (%rcx), %xmm1 |
| # CHECK-NEXT: - 3.00 - - - - - - - 3.00 - - - - - 1.00 - - - - 3.00 - - movaps (%rdx), %xmm2 |
| # CHECK-NEXT: 3.00 - - - - - - - 3.00 - - - - - 1.00 - - - - 3.00 - - - movaps (%rbx), %xmm3 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: 0 |
| # CHECK-NEXT: Index 0123456789 |
| |
| # CHECK: [0,0] DeeeeeER . movaps (%rax), %xmm0 |
| # CHECK-NEXT: [0,1] DeeeeeER . movaps (%rcx), %xmm1 |
| # CHECK-NEXT: [0,2] D===eeeeeER movaps (%rdx), %xmm2 |
| # CHECK-NEXT: [0,3] D===eeeeeER movaps (%rbx), %xmm3 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 1 1.0 1.0 0.0 movaps (%rax), %xmm0 |
| # CHECK-NEXT: 1. 1 1.0 1.0 0.0 movaps (%rcx), %xmm1 |
| # CHECK-NEXT: 2. 1 4.0 4.0 0.0 movaps (%rdx), %xmm2 |
| # CHECK-NEXT: 3. 1 4.0 4.0 0.0 movaps (%rbx), %xmm3 |
| # CHECK-NEXT: 1 2.5 2.5 0.0 <total> |
| |
| # CHECK: [6] Code Region |
| |
| # CHECK: Iterations: 100 |
| # CHECK-NEXT: Instructions: 400 |
| # CHECK-NEXT: Total Cycles: 605 |
| # CHECK-NEXT: Total uOps: 800 |
| |
| # CHECK: Dispatch Width: 4 |
| # CHECK-NEXT: uOps Per Cycle: 1.32 |
| # CHECK-NEXT: IPC: 0.66 |
| # CHECK-NEXT: Block RThroughput: 6.0 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 2 5 1.50 * vmovaps (%rax), %ymm0 |
| # CHECK-NEXT: 2 5 1.50 * vmovaps (%rcx), %ymm1 |
| # CHECK-NEXT: 2 5 1.50 * vmovaps (%rdx), %ymm2 |
| # CHECK-NEXT: 2 5 1.50 * vmovaps (%rbx), %ymm3 |
| |
| # CHECK: Dynamic Dispatch Stall Cycles: |
| # CHECK-NEXT: RAT - Register unavailable: 0 |
| # CHECK-NEXT: RCU - Retire tokens unavailable: 0 |
| # CHECK-NEXT: SCHEDQ - Scheduler full: 0 |
| # CHECK-NEXT: LQ - Load queue full: 345 (57.0%) |
| # CHECK-NEXT: SQ - Store queue full: 0 |
| # CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0 |
| |
| # CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched: |
| # CHECK-NEXT: [# dispatched], [# cycles] |
| # CHECK-NEXT: 0, 405 (66.9%) |
| # CHECK-NEXT: 4, 200 (33.1%) |
| |
| # CHECK: Schedulers - number of cycles where we saw N micro opcodes issued: |
| # CHECK-NEXT: [# issued], [# cycles] |
| # CHECK-NEXT: 0, 405 (66.9%) |
| # CHECK-NEXT: 4, 200 (33.1%) |
| |
| # CHECK: Scheduler's queue usage: |
| # CHECK-NEXT: [1] Resource name. |
| # CHECK-NEXT: [2] Average number of used buffer entries. |
| # CHECK-NEXT: [3] Maximum number of used buffer entries. |
| # CHECK-NEXT: [4] Total number of buffer entries. |
| |
| # CHECK: [1] [2] [3] [4] |
| # CHECK-NEXT: PdEX 33 36 40 |
| # CHECK-NEXT: PdFPU 33 36 64 |
| # CHECK-NEXT: PdLoad 36 40 40 |
| # CHECK-NEXT: PdStore 0 0 24 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0.0] - PdAGLU01 |
| # CHECK-NEXT: [0.1] - PdAGLU01 |
| # CHECK-NEXT: [1] - PdBranch |
| # CHECK-NEXT: [2] - PdCount |
| # CHECK-NEXT: [3] - PdDiv |
| # CHECK-NEXT: [4] - PdEX0 |
| # CHECK-NEXT: [5] - PdEX1 |
| # CHECK-NEXT: [6] - PdFPCVT |
| # CHECK-NEXT: [7.0] - PdFPFMA |
| # CHECK-NEXT: [7.1] - PdFPFMA |
| # CHECK-NEXT: [8.0] - PdFPMAL |
| # CHECK-NEXT: [8.1] - PdFPMAL |
| # CHECK-NEXT: [9] - PdFPMMA |
| # CHECK-NEXT: [10] - PdFPSTO |
| # CHECK-NEXT: [11] - PdFPU0 |
| # CHECK-NEXT: [12] - PdFPU1 |
| # CHECK-NEXT: [13] - PdFPU2 |
| # CHECK-NEXT: [14] - PdFPU3 |
| # CHECK-NEXT: [15] - PdFPXBR |
| # CHECK-NEXT: [16.0] - PdLoad |
| # CHECK-NEXT: [16.1] - PdLoad |
| # CHECK-NEXT: [17] - PdMul |
| # CHECK-NEXT: [18] - PdStore |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] |
| # CHECK-NEXT: 6.00 6.00 - - - - - - 6.00 6.00 - - - - 2.00 2.00 - - - 6.00 6.00 - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0.0] [0.1] [1] [2] [3] [4] [5] [6] [7.0] [7.1] [8.0] [8.1] [9] [10] [11] [12] [13] [14] [15] [16.0] [16.1] [17] [18] Instructions: |
| # CHECK-NEXT: - 3.00 - - - - - - - 3.00 - - - - - 1.00 - - - - 3.00 - - vmovaps (%rax), %ymm0 |
| # CHECK-NEXT: 3.00 - - - - - - - 3.00 - - - - - 1.00 - - - - 3.00 - - - vmovaps (%rcx), %ymm1 |
| # CHECK-NEXT: - 3.00 - - - - - - - 3.00 - - - - - 1.00 - - - - 3.00 - - vmovaps (%rdx), %ymm2 |
| # CHECK-NEXT: 3.00 - - - - - - - 3.00 - - - - - 1.00 - - - - 3.00 - - - vmovaps (%rbx), %ymm3 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: 0 |
| # CHECK-NEXT: Index 0123456789 |
| |
| # CHECK: [0,0] DeeeeeER . vmovaps (%rax), %ymm0 |
| # CHECK-NEXT: [0,1] DeeeeeER . vmovaps (%rcx), %ymm1 |
| # CHECK-NEXT: [0,2] .D==eeeeeER vmovaps (%rdx), %ymm2 |
| # CHECK-NEXT: [0,3] .D==eeeeeER vmovaps (%rbx), %ymm3 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 1 1.0 1.0 0.0 vmovaps (%rax), %ymm0 |
| # CHECK-NEXT: 1. 1 1.0 1.0 0.0 vmovaps (%rcx), %ymm1 |
| # CHECK-NEXT: 2. 1 3.0 3.0 0.0 vmovaps (%rdx), %ymm2 |
| # CHECK-NEXT: 3. 1 3.0 3.0 0.0 vmovaps (%rbx), %ymm3 |
| # CHECK-NEXT: 1 2.0 2.0 0.0 <total> |
