test/tools/llvm-mca/X86/Barcelona/int-to-fpu-forwarding-2.s

# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=x86-64 -iterations=500 < %s | FileCheck %s

# LLVM-MCA-BEGIN
cvtsi2ss %ecx, %xmm0
# LLVM-MCA-END

# LLVM-MCA-BEGIN
cvtsi2sd %ecx, %xmm0
# LLVM-MCA-END

# LLVM-MCA-BEGIN
movd %ecx, %xmm0
# LLVM-MCA-END

# LLVM-MCA-BEGIN
movq %rcx, %xmm0
# LLVM-MCA-END

# CHECK:      [0] Code Region

# CHECK:      Iterations:        500
# CHECK-NEXT: Instructions:      500
# CHECK-NEXT: Total Cycles:      2503
# CHECK-NEXT: Total uOps:        1500

# CHECK:      Dispatch Width:    4
# CHECK-NEXT: uOps Per Cycle:    0.60
# CHECK-NEXT: IPC:               0.20
# CHECK-NEXT: Block RThroughput: 2.0

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  3      5     2.00                        cvtsi2ss	%ecx, %xmm0

# CHECK:      Resources:
# CHECK-NEXT: [0]   - SBDivider
# CHECK-NEXT: [1]   - SBFPDivider
# CHECK-NEXT: [2]   - SBPort0
# CHECK-NEXT: [3]   - SBPort1
# CHECK-NEXT: [4]   - SBPort4
# CHECK-NEXT: [5]   - SBPort5
# CHECK-NEXT: [6.0] - SBPort23
# CHECK-NEXT: [6.1] - SBPort23

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6.0]  [6.1]
# CHECK-NEXT:  -      -      -     1.00    -     2.00    -      -

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6.0]  [6.1]  Instructions:
# CHECK-NEXT:  -      -      -     1.00    -     2.00    -      -     cvtsi2ss	%ecx, %xmm0

# CHECK:      [1] Code Region

# CHECK:      Iterations:        500
# CHECK-NEXT: Instructions:      500
# CHECK-NEXT: Total Cycles:      2003
# CHECK-NEXT: Total uOps:        1000

# CHECK:      Dispatch Width:    4
# CHECK-NEXT: uOps Per Cycle:    0.50
# CHECK-NEXT: IPC:               0.25
# CHECK-NEXT: Block RThroughput: 1.0

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  2      4     1.00                        cvtsi2sd	%ecx, %xmm0

# CHECK:      Resources:
# CHECK-NEXT: [0]   - SBDivider
# CHECK-NEXT: [1]   - SBFPDivider
# CHECK-NEXT: [2]   - SBPort0
# CHECK-NEXT: [3]   - SBPort1
# CHECK-NEXT: [4]   - SBPort4
# CHECK-NEXT: [5]   - SBPort5
# CHECK-NEXT: [6.0] - SBPort23
# CHECK-NEXT: [6.1] - SBPort23

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6.0]  [6.1]
# CHECK-NEXT:  -      -      -     1.00    -     1.00    -      -

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6.0]  [6.1]  Instructions:
# CHECK-NEXT:  -      -      -     1.00    -     1.00    -      -     cvtsi2sd	%ecx, %xmm0

# CHECK:      [2] Code Region

# CHECK:      Iterations:        500
# CHECK-NEXT: Instructions:      500
# CHECK-NEXT: Total Cycles:      503
# CHECK-NEXT: Total uOps:        500

# CHECK:      Dispatch Width:    4
# CHECK-NEXT: uOps Per Cycle:    0.99
# CHECK-NEXT: IPC:               0.99
# CHECK-NEXT: Block RThroughput: 1.0

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      1     1.00                        movd	%ecx, %xmm0

# CHECK:      Resources:
# CHECK-NEXT: [0]   - SBDivider
# CHECK-NEXT: [1]   - SBFPDivider
# CHECK-NEXT: [2]   - SBPort0
# CHECK-NEXT: [3]   - SBPort1
# CHECK-NEXT: [4]   - SBPort4
# CHECK-NEXT: [5]   - SBPort5
# CHECK-NEXT: [6.0] - SBPort23
# CHECK-NEXT: [6.1] - SBPort23

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6.0]  [6.1]
# CHECK-NEXT:  -      -      -      -      -     1.00    -      -

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6.0]  [6.1]  Instructions:
# CHECK-NEXT:  -      -      -      -      -     1.00    -      -     movd	%ecx, %xmm0

# CHECK:      [3] Code Region

# CHECK:      Iterations:        500
# CHECK-NEXT: Instructions:      500
# CHECK-NEXT: Total Cycles:      503
# CHECK-NEXT: Total uOps:        500

# CHECK:      Dispatch Width:    4
# CHECK-NEXT: uOps Per Cycle:    0.99
# CHECK-NEXT: IPC:               0.99
# CHECK-NEXT: Block RThroughput: 1.0

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      1     1.00                        movq	%rcx, %xmm0

# CHECK:      Resources:
# CHECK-NEXT: [0]   - SBDivider
# CHECK-NEXT: [1]   - SBFPDivider
# CHECK-NEXT: [2]   - SBPort0
# CHECK-NEXT: [3]   - SBPort1
# CHECK-NEXT: [4]   - SBPort4
# CHECK-NEXT: [5]   - SBPort5
# CHECK-NEXT: [6.0] - SBPort23
# CHECK-NEXT: [6.1] - SBPort23

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6.0]  [6.1]
# CHECK-NEXT:  -      -      -      -      -     1.00    -      -

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6.0]  [6.1]  Instructions:
# CHECK-NEXT:  -      -      -      -      -     1.00    -      -     movq	%rcx, %xmm0