test/Transforms/LoopVectorize/AArch64/scalable-reductions.ll - llvm-project/llvm - Git at Google

 ; RUN: opt < %s -loop-vectorize -pass-remarks=loop-vectorize -pass-remarks-analysis=loop-vectorize -pass-remarks-missed=loop-vectorize -mtriple aarch64-unknown-linux-gnu -mattr=+sve -S 2>%t | FileCheck %s -check-prefix=CHECK
 ; RUN: cat %t | FileCheck %s -check-prefix=CHECK-REMARK

 ; Reduction can be vectorized

 ; ADD

 ; CHECK-REMARK: vectorized loop (vectorization width: vscale x 8, interleaved count: 2)
 define i32 @add(i32* nocapture %a, i32* nocapture readonly %b, i64 %n) {
 ; CHECK-LABEL: @add
 ; CHECK: vector.body:
 ; CHECK: %[[LOAD1:.*]] = load <vscale x 8 x i32>
 ; CHECK: %[[LOAD2:.*]] = load <vscale x 8 x i32>
 ; CHECK: %[[ADD1:.*]] = add <vscale x 8 x i32> %[[LOAD1]]
 ; CHECK: %[[ADD2:.*]] = add <vscale x 8 x i32> %[[LOAD2]]
 ; CHECK: middle.block:
 ; CHECK: %[[ADD:.*]] = add <vscale x 8 x i32> %[[ADD2]], %[[ADD1]]
 ; CHECK-NEXT: call i32 @llvm.vector.reduce.add.nxv8i32(<vscale x 8 x i32> %[[ADD]])
 entry:
   br label %for.body

 for.body:                                         ; preds = %entry, %for.body
   %iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
   %sum.07 = phi i32 [ 2, %entry ], [ %add, %for.body ]
   %arrayidx = getelementptr inbounds i32, i32* %a, i64 %iv
   %0 = load i32, i32* %arrayidx, align 4
   %add = add nsw i32 %0, %sum.07
   %iv.next = add nuw nsw i64 %iv, 1
   %exitcond.not = icmp eq i64 %iv.next, %n
   br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

 for.end:                                 ; preds = %for.body, %entry
   ret i32 %add
 }

 ; OR

 ; CHECK-REMARK: vectorized loop (vectorization width: vscale x 8, interleaved count: 2)
 define i32 @or(i32* nocapture %a, i32* nocapture readonly %b, i64 %n) {
 ; CHECK-LABEL: @or
 ; CHECK: vector.body:
 ; CHECK: %[[LOAD1:.*]] = load <vscale x 8 x i32>
 ; CHECK: %[[LOAD2:.*]] = load <vscale x 8 x i32>
 ; CHECK: %[[OR1:.*]] = or <vscale x 8 x i32> %[[LOAD1]]
 ; CHECK: %[[OR2:.*]] = or <vscale x 8 x i32> %[[LOAD2]]
 ; CHECK: middle.block:
 ; CHECK: %[[OR:.*]] = or <vscale x 8 x i32> %[[OR2]], %[[OR1]]
 ; CHECK-NEXT: call i32 @llvm.vector.reduce.or.nxv8i32(<vscale x 8 x i32> %[[OR]])
 entry:
   br label %for.body

 for.body:                                         ; preds = %entry, %for.body
   %iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
   %sum.07 = phi i32 [ 2, %entry ], [ %or, %for.body ]
   %arrayidx = getelementptr inbounds i32, i32* %a, i64 %iv
   %0 = load i32, i32* %arrayidx, align 4
   %or = or i32 %0, %sum.07
   %iv.next = add nuw nsw i64 %iv, 1
   %exitcond.not = icmp eq i64 %iv.next, %n
   br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

 for.end:                                 ; preds = %for.body, %entry
   ret i32 %or
 }

 ; AND

 ; CHECK-REMARK: vectorized loop (vectorization width: vscale x 8, interleaved count: 2)
 define i32 @and(i32* nocapture %a, i32* nocapture readonly %b, i64 %n) {
 ; CHECK-LABEL: @and
 ; CHECK: vector.body:
 ; CHECK: %[[LOAD1:.*]] = load <vscale x 8 x i32>
 ; CHECK: %[[LOAD2:.*]] = load <vscale x 8 x i32>
 ; CHECK: %[[AND1:.*]] = and <vscale x 8 x i32> %[[LOAD1]]
 ; CHECK: %[[AND2:.*]] = and <vscale x 8 x i32> %[[LOAD2]]
 ; CHECK: middle.block:
 ; CHECK: %[[ABD:.*]] = and <vscale x 8 x i32> %[[ADD2]], %[[AND1]]
 ; CHECK-NEXT: call i32 @llvm.vector.reduce.and.nxv8i32(<vscale x 8 x i32> %[[ADD]])
 entry:
   br label %for.body

 for.body:                                         ; preds = %entry, %for.body
   %iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
   %sum.07 = phi i32 [ 2, %entry ], [ %and, %for.body ]
   %arrayidx = getelementptr inbounds i32, i32* %a, i64 %iv
   %0 = load i32, i32* %arrayidx, align 4
   %and = and i32 %0, %sum.07
   %iv.next = add nuw nsw i64 %iv, 1
   %exitcond.not = icmp eq i64 %iv.next, %n
   br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

 for.end:                                 ; preds = %for.body, %entry
   ret i32 %and
 }

 ; XOR

 ; CHECK-REMARK: vectorized loop (vectorization width: vscale x 8, interleaved count: 2)
 define i32 @xor(i32* nocapture %a, i32* nocapture readonly %b, i64 %n) {
 ; CHECK-LABEL: @xor
 ; CHECK: vector.body:
 ; CHECK: %[[LOAD1:.*]] = load <vscale x 8 x i32>
 ; CHECK: %[[LOAD2:.*]] = load <vscale x 8 x i32>
 ; CHECK: %[[XOR1:.*]] = xor <vscale x 8 x i32> %[[LOAD1]]
 ; CHECK: %[[XOR2:.*]] = xor <vscale x 8 x i32> %[[LOAD2]]
 ; CHECK: middle.block:
 ; CHECK: %[[XOR:.*]] = xor <vscale x 8 x i32> %[[XOR2]], %[[XOR1]]
 ; CHECK-NEXT: call i32 @llvm.vector.reduce.xor.nxv8i32(<vscale x 8 x i32> %[[XOR]])
 entry:
   br label %for.body

 for.body:                                         ; preds = %entry, %for.body
   %iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
   %sum.07 = phi i32 [ 2, %entry ], [ %xor, %for.body ]
   %arrayidx = getelementptr inbounds i32, i32* %a, i64 %iv
   %0 = load i32, i32* %arrayidx, align 4
   %xor = xor i32 %0, %sum.07
   %iv.next = add nuw nsw i64 %iv, 1
   %exitcond.not = icmp eq i64 %iv.next, %n
   br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

 for.end:                                 ; preds = %for.body, %entry
   ret i32 %xor
 }

 ; CHECK-REMARK: vectorized loop (vectorization width: vscale x 8, interleaved count: 2)
 ; SMIN

 define i32 @smin(i32* nocapture %a, i32* nocapture readonly %b, i64 %n) {
 ; CHECK-LABEL: @smin
 ; CHECK: vector.body:
 ; CHECK: %[[LOAD1:.*]] = load <vscale x 8 x i32>
 ; CHECK: %[[LOAD2:.*]] = load <vscale x 8 x i32>
 ; CHECK: %[[ICMP1:.*]] = icmp slt <vscale x 8 x i32> %[[LOAD1]]
 ; CHECK: %[[ICMP2:.*]] = icmp slt <vscale x 8 x i32> %[[LOAD2]]
 ; CHECK: %[[SEL1:.*]] = select <vscale x 8 x i1> %[[ICMP1]], <vscale x 8 x i32> %[[LOAD1]]
 ; CHECK: %[[SEL2:.*]] = select <vscale x 8 x i1> %[[ICMP2]], <vscale x 8 x i32> %[[LOAD2]]
 ; CHECK: middle.block:
 ; CHECK: %[[ICMP:.*]] = icmp slt <vscale x 8 x i32> %[[SEL1]], %[[SEL2]]
 ; CHECK-NEXT: %[[SEL:.*]] = select <vscale x 8 x i1> %[[ICMP]], <vscale x 8 x i32> %[[SEL1]], <vscale x 8 x i32> %[[SEL2]]
 ; CHECK-NEXT: call i32 @llvm.vector.reduce.smin.nxv8i32(<vscale x 8 x i32>  %[[SEL]])
 entry:
   br label %for.body

 for.body:                                         ; preds = %entry, %for.body
   %iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
   %sum.010 = phi i32 [ 2, %entry ], [ %.sroa.speculated, %for.body ]
   %arrayidx = getelementptr inbounds i32, i32* %a, i64 %iv
   %0 = load i32, i32* %arrayidx, align 4
   %cmp.i = icmp slt i32 %0, %sum.010
   %.sroa.speculated = select i1 %cmp.i, i32 %0, i32 %sum.010
   %iv.next = add nuw nsw i64 %iv, 1
   %exitcond.not = icmp eq i64 %iv.next, %n
   br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

 for.end:
   ret i32 %.sroa.speculated
 }

 ; CHECK-REMARK: vectorized loop (vectorization width: vscale x 8, interleaved count: 2)
 ; UMAX

 define i32 @umax(i32* nocapture %a, i32* nocapture readonly %b, i64 %n) {
 ; CHECK-LABEL: @umax
 ; CHECK: vector.body:
 ; CHECK: %[[LOAD1:.*]] = load <vscale x 8 x i32>
 ; CHECK: %[[LOAD2:.*]] = load <vscale x 8 x i32>
 ; CHECK: %[[ICMP1:.*]] = icmp ugt <vscale x 8 x i32> %[[LOAD1]]
 ; CHECK: %[[ICMP2:.*]] = icmp ugt <vscale x 8 x i32> %[[LOAD2]]
 ; CHECK: %[[SEL1:.*]] = select <vscale x 8 x i1> %[[ICMP1]], <vscale x 8 x i32> %[[LOAD1]]
 ; CHECK: %[[SEL2:.*]] = select <vscale x 8 x i1> %[[ICMP2]], <vscale x 8 x i32> %[[LOAD2]]
 ; CHECK: middle.block:
 ; CHECK: %[[ICMP:.*]] = icmp ugt <vscale x 8 x i32> %[[SEL1]], %[[SEL2]]
 ; CHECK-NEXT: %[[SEL:.*]] = select <vscale x 8 x i1> %[[ICMP]], <vscale x 8 x i32> %[[SEL1]], <vscale x 8 x i32> %[[SEL2]]
 ; CHECK-NEXT: call i32 @llvm.vector.reduce.umax.nxv8i32(<vscale x 8 x i32>  %[[SEL]])
 entry:
   br label %for.body

 for.body:                                         ; preds = %entry, %for.body
   %iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
   %sum.010 = phi i32 [ 2, %entry ], [ %.sroa.speculated, %for.body ]
   %arrayidx = getelementptr inbounds i32, i32* %a, i64 %iv
   %0 = load i32, i32* %arrayidx, align 4
   %cmp.i = icmp ugt i32 %0, %sum.010
   %.sroa.speculated = select i1 %cmp.i, i32 %0, i32 %sum.010
   %iv.next = add nuw nsw i64 %iv, 1
   %exitcond.not = icmp eq i64 %iv.next, %n
   br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

 for.end:
   ret i32 %.sroa.speculated
 }

 ; CHECK-REMARK: vectorized loop (vectorization width: vscale x 8, interleaved count: 2)
 ; FADD (FAST)

 define float @fadd_fast(float* noalias nocapture readonly %a, i64 %n) {
 ; CHECK-LABEL: @fadd_fast
 ; CHECK: vector.body:
 ; CHECK: %[[LOAD1:.*]] = load <vscale x 8 x float>
 ; CHECK: %[[LOAD2:.*]] = load <vscale x 8 x float>
 ; CHECK: %[[ADD1:.*]] = fadd fast <vscale x 8 x float> %[[LOAD1]]
 ; CHECK: %[[ADD2:.*]] = fadd fast <vscale x 8 x float> %[[LOAD2]]
 ; CHECK: middle.block:
 ; CHECK: %[[ADD:.*]] = fadd fast <vscale x 8 x float> %[[ADD2]], %[[ADD1]]
 ; CHECK-NEXT: call fast float @llvm.vector.reduce.fadd.nxv8f32(float -0.000000e+00, <vscale x 8 x float> %[[ADD]])
 entry:
   br label %for.body

 for.body:
   %iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
   %sum.07 = phi float [ 0.000000e+00, %entry ], [ %add, %for.body ]
   %arrayidx = getelementptr inbounds float, float* %a, i64 %iv
   %0 = load float, float* %arrayidx, align 4
   %add = fadd fast float %0, %sum.07
   %iv.next = add nuw nsw i64 %iv, 1
   %exitcond.not = icmp eq i64 %iv.next, %n
   br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

 for.end:
   ret float %add
 }

 ; CHECK-REMARK: Scalable vectorization not supported for the reduction operations found in this loop. Using fixed-width vectorization instead.
 ; CHECK-REMARK: vectorized loop (vectorization width: 8, interleaved count: 2)
 define bfloat @fadd_fast_bfloat(bfloat* noalias nocapture readonly %a, i64 %n) {
 ; CHECK-LABEL: @fadd_fast_bfloat
 ; CHECK: vector.body:
 ; CHECK: %[[LOAD1:.*]] = load <8 x bfloat>
 ; CHECK: %[[LOAD2:.*]] = load <8 x bfloat>
 ; CHECK: %[[FADD1:.*]] = fadd fast <8 x bfloat> %[[LOAD1]]
 ; CHECK: %[[FADD2:.*]] = fadd fast <8 x bfloat> %[[LOAD2]]
 ; CHECK: middle.block:
 ; CHECK: %[[RDX:.*]] = fadd fast <8 x bfloat> %[[FADD2]], %[[FADD1]]
 ; CHECK: call fast bfloat @llvm.vector.reduce.fadd.v8bf16(bfloat 0xR8000, <8 x bfloat> %[[RDX]])
 entry:
   br label %for.body

 for.body:
   %iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
   %sum.07 = phi bfloat [ 0.000000e+00, %entry ], [ %add, %for.body ]
   %arrayidx = getelementptr inbounds bfloat, bfloat* %a, i64 %iv
   %0 = load bfloat, bfloat* %arrayidx, align 4
   %add = fadd fast bfloat %0, %sum.07
   %iv.next = add nuw nsw i64 %iv, 1
   %exitcond.not = icmp eq i64 %iv.next, %n
   br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

 for.end:
   ret bfloat %add
 }

 ; FMIN (FAST)

 ; CHECK-REMARK: vectorized loop (vectorization width: vscale x 8, interleaved count: 2)
 define float @fmin_fast(float* noalias nocapture readonly %a, i64 %n) #0 {
 ; CHECK-LABEL: @fmin_fast
 ; CHECK: vector.body:
 ; CHECK: %[[LOAD1:.*]] = load <vscale x 8 x float>
 ; CHECK: %[[LOAD2:.*]] = load <vscale x 8 x float>
 ; CHECK: %[[FCMP1:.*]] = fcmp olt <vscale x 8 x float> %[[LOAD1]]
 ; CHECK: %[[FCMP2:.*]] = fcmp olt <vscale x 8 x float> %[[LOAD2]]
 ; CHECK: %[[SEL1:.*]] = select <vscale x 8 x i1> %[[FCMP1]], <vscale x 8 x float> %[[LOAD1]]
 ; CHECK: %[[SEL2:.*]] = select <vscale x 8 x i1> %[[FCMP2]], <vscale x 8 x float> %[[LOAD2]]
 ; CHECK: middle.block:
 ; CHECK: %[[FCMP:.*]] = fcmp olt <vscale x 8 x float> %[[SEL1]], %[[SEL2]]
 ; CHECK-NEXT: %[[SEL:.*]] = select <vscale x 8 x i1> %[[FCMP]], <vscale x 8 x float> %[[SEL1]], <vscale x 8 x float> %[[SEL2]]
 ; CHECK-NEXT: call float @llvm.vector.reduce.fmin.nxv8f32(<vscale x 8 x float> %[[SEL]])
 entry:
   br label %for.body

 for.body:
   %iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
   %sum.07 = phi float [ 0.000000e+00, %entry ], [ %.sroa.speculated, %for.body ]
   %arrayidx = getelementptr inbounds float, float* %a, i64 %iv
   %0 = load float, float* %arrayidx, align 4
   %cmp.i = fcmp olt float %0, %sum.07
   %.sroa.speculated = select i1 %cmp.i, float %0, float %sum.07
   %iv.next = add nuw nsw i64 %iv, 1
   %exitcond.not = icmp eq i64 %iv.next, %n
   br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

 for.end:
   ret float %.sroa.speculated
 }

 ; FMAX (FAST)

 ; CHECK-REMARK: vectorized loop (vectorization width: vscale x 8, interleaved count: 2)
 define float @fmax_fast(float* noalias nocapture readonly %a, i64 %n) #0 {
 ; CHECK-LABEL: @fmax_fast
 ; CHECK: vector.body:
 ; CHECK: %[[LOAD1:.*]] = load <vscale x 8 x float>
 ; CHECK: %[[LOAD2:.*]] = load <vscale x 8 x float>
 ; CHECK: %[[FCMP1:.*]] = fcmp fast ogt <vscale x 8 x float> %[[LOAD1]]
 ; CHECK: %[[FCMP2:.*]] = fcmp fast ogt <vscale x 8 x float> %[[LOAD2]]
 ; CHECK: %[[SEL1:.*]] = select <vscale x 8 x i1> %[[FCMP1]], <vscale x 8 x float> %[[LOAD1]]
 ; CHECK: %[[SEL2:.*]] = select <vscale x 8 x i1> %[[FCMP2]], <vscale x 8 x float> %[[LOAD2]]
 ; CHECK: middle.block:
 ; CHECK: %[[FCMP:.*]] = fcmp fast ogt <vscale x 8 x float> %[[SEL1]], %[[SEL2]]
 ; CHECK-NEXT: %[[SEL:.*]] = select fast <vscale x 8 x i1> %[[FCMP]], <vscale x 8 x float> %[[SEL1]], <vscale x 8 x float> %[[SEL2]]
 ; CHECK-NEXT: call fast float @llvm.vector.reduce.fmax.nxv8f32(<vscale x 8 x float> %[[SEL]])
 entry:
   br label %for.body

 for.body:
   %iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
   %sum.07 = phi float [ 0.000000e+00, %entry ], [ %.sroa.speculated, %for.body ]
   %arrayidx = getelementptr inbounds float, float* %a, i64 %iv
   %0 = load float, float* %arrayidx, align 4
   %cmp.i = fcmp fast ogt float %0, %sum.07
   %.sroa.speculated = select i1 %cmp.i, float %0, float %sum.07
   %iv.next = add nuw nsw i64 %iv, 1
   %exitcond.not = icmp eq i64 %iv.next, %n
   br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

 for.end:
   ret float %.sroa.speculated
 }

 ; Reduction cannot be vectorized

 ; MUL

 ; CHECK-REMARK: Scalable vectorization not supported for the reduction operations found in this loop. Using fixed-width vectorization instead.
 ; CHECK-REMARK: vectorized loop (vectorization width: 8, interleaved count: 2)
 define i32 @mul(i32* nocapture %a, i32* nocapture readonly %b, i64 %n) {
 ; CHECK-LABEL: @mul
 ; CHECK: vector.body:
 ; CHECK: %[[LOAD1:.*]] = load <8 x i32>
 ; CHECK: %[[LOAD2:.*]] = load <8 x i32>
 ; CHECK: %[[MUL1:.*]] = mul <8 x i32> %[[LOAD1]]
 ; CHECK: %[[MUL2:.*]] = mul <8 x i32> %[[LOAD2]]
 ; CHECK: middle.block:
 ; CHECK: %[[RDX:.*]] = mul <8 x i32> %[[MUL2]], %[[MUL1]]
 ; CHECK: call i32 @llvm.vector.reduce.mul.v8i32(<8 x i32> %[[RDX]])
 entry:
   br label %for.body

 for.body:                                         ; preds = %entry, %for.body
   %iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
   %sum.07 = phi i32 [ 2, %entry ], [ %mul, %for.body ]
   %arrayidx = getelementptr inbounds i32, i32* %a, i64 %iv
   %0 = load i32, i32* %arrayidx, align 4
   %mul = mul nsw i32 %0, %sum.07
   %iv.next = add nuw nsw i64 %iv, 1
   %exitcond.not = icmp eq i64 %iv.next, %n
   br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

 for.end:                                 ; preds = %for.body, %entry
   ret i32 %mul
 }

 ; Note: This test was added to ensure we always check the legality of reductions (end emit a warning if necessary) before checking for memory dependencies
 ; CHECK-REMARK: Scalable vectorization not supported for the reduction operations found in this loop. Using fixed-width vectorization instead.
 ; CHECK-REMARK: vectorized loop (vectorization width: 8, interleaved count: 2)
 define i32 @memory_dependence(i32* noalias nocapture %a, i32* noalias nocapture readonly %b, i64 %n) {
 ; CHECK-LABEL: @memory_dependence
 ; CHECK: vector.body:
 ; CHECK: %[[LOAD1:.*]] = load <8 x i32>
 ; CHECK: %[[LOAD2:.*]] = load <8 x i32>
 ; CHECK: %[[LOAD3:.*]] = load <8 x i32>
 ; CHECK: %[[LOAD4:.*]] = load <8 x i32>
 ; CHECK: %[[ADD1:.*]] = add nsw <8 x i32> %[[LOAD3]], %[[LOAD1]]
 ; CHECK: %[[ADD2:.*]] = add nsw <8 x i32> %[[LOAD4]], %[[LOAD2]]
 ; CHECK: %[[MUL1:.*]] = mul <8 x i32> %[[LOAD3]]
 ; CHECK: %[[MUL2:.*]] = mul <8 x i32> %[[LOAD4]]
 ; CHECK: middle.block:
 ; CHECK: %[[RDX:.*]] = mul <8 x i32> %[[MUL2]], %[[MUL1]]
 ; CHECK: call i32 @llvm.vector.reduce.mul.v8i32(<8 x i32> %[[RDX]])
 entry:
   br label %for.body

 for.body:
   %i = phi i64 [ %inc, %for.body ], [ 0, %entry ]
   %sum = phi i32 [ %mul, %for.body ], [ 2, %entry ]
   %arrayidx = getelementptr inbounds i32, i32* %a, i64 %i
   %0 = load i32, i32* %arrayidx, align 4
   %arrayidx1 = getelementptr inbounds i32, i32* %b, i64 %i
   %1 = load i32, i32* %arrayidx1, align 4
   %add = add nsw i32 %1, %0
   %add2 = add nuw nsw i64 %i, 32
   %arrayidx3 = getelementptr inbounds i32, i32* %a, i64 %add2
   store i32 %add, i32* %arrayidx3, align 4
   %mul = mul nsw i32 %1, %sum
   %inc = add nuw nsw i64 %i, 1
   %exitcond.not = icmp eq i64 %inc, %n
   br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

 for.end:
   ret i32 %mul
 }

 attributes #0 = { "no-nans-fp-math"="true" "no-signed-zeros-fp-math"="true" }

 !0 = distinct !{!0, !1, !2, !3, !4}
 !1 = !{!"llvm.loop.vectorize.width", i32 8}
 !2 = !{!"llvm.loop.vectorize.scalable.enable", i1 true}
 !3 = !{!"llvm.loop.interleave.count", i32 2}
 !4 = !{!"llvm.loop.vectorize.enable", i1 true}
	; RUN: opt < %s -loop-vectorize -pass-remarks=loop-vectorize -pass-remarks-analysis=loop-vectorize -pass-remarks-missed=loop-vectorize -mtriple aarch64-unknown-linux-gnu -mattr=+sve -S 2>%t \| FileCheck %s -check-prefix=CHECK
	; RUN: cat %t \| FileCheck %s -check-prefix=CHECK-REMARK

	; Reduction can be vectorized

	; ADD

	; CHECK-REMARK: vectorized loop (vectorization width: vscale x 8, interleaved count: 2)
	define i32 @add(i32* nocapture %a, i32* nocapture readonly %b, i64 %n) {
	; CHECK-LABEL: @add
	; CHECK: vector.body:
	; CHECK: %[[LOAD1:.*]] = load <vscale x 8 x i32>
	; CHECK: %[[LOAD2:.*]] = load <vscale x 8 x i32>
	; CHECK: %[[ADD1:.*]] = add <vscale x 8 x i32> %[[LOAD1]]
	; CHECK: %[[ADD2:.*]] = add <vscale x 8 x i32> %[[LOAD2]]
	; CHECK: middle.block:
	; CHECK: %[[ADD:.*]] = add <vscale x 8 x i32> %[[ADD2]], %[[ADD1]]
	; CHECK-NEXT: call i32 @llvm.vector.reduce.add.nxv8i32(<vscale x 8 x i32> %[[ADD]])
	entry:
	br label %for.body

	for.body: ; preds = %entry, %for.body
	%iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
	%sum.07 = phi i32 [ 2, %entry ], [ %add, %for.body ]
	%arrayidx = getelementptr inbounds i32, i32* %a, i64 %iv
	%0 = load i32, i32* %arrayidx, align 4
	%add = add nsw i32 %0, %sum.07
	%iv.next = add nuw nsw i64 %iv, 1
	%exitcond.not = icmp eq i64 %iv.next, %n
	br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

	for.end: ; preds = %for.body, %entry
	ret i32 %add
	}

	; OR

	; CHECK-REMARK: vectorized loop (vectorization width: vscale x 8, interleaved count: 2)
	define i32 @or(i32* nocapture %a, i32* nocapture readonly %b, i64 %n) {
	; CHECK-LABEL: @or
	; CHECK: vector.body:
	; CHECK: %[[LOAD1:.*]] = load <vscale x 8 x i32>
	; CHECK: %[[LOAD2:.*]] = load <vscale x 8 x i32>
	; CHECK: %[[OR1:.*]] = or <vscale x 8 x i32> %[[LOAD1]]
	; CHECK: %[[OR2:.*]] = or <vscale x 8 x i32> %[[LOAD2]]
	; CHECK: middle.block:
	; CHECK: %[[OR:.*]] = or <vscale x 8 x i32> %[[OR2]], %[[OR1]]
	; CHECK-NEXT: call i32 @llvm.vector.reduce.or.nxv8i32(<vscale x 8 x i32> %[[OR]])
	entry:
	br label %for.body

	for.body: ; preds = %entry, %for.body
	%iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
	%sum.07 = phi i32 [ 2, %entry ], [ %or, %for.body ]
	%arrayidx = getelementptr inbounds i32, i32* %a, i64 %iv
	%0 = load i32, i32* %arrayidx, align 4
	%or = or i32 %0, %sum.07
	%iv.next = add nuw nsw i64 %iv, 1
	%exitcond.not = icmp eq i64 %iv.next, %n
	br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

	for.end: ; preds = %for.body, %entry
	ret i32 %or
	}

	; AND

	; CHECK-REMARK: vectorized loop (vectorization width: vscale x 8, interleaved count: 2)
	define i32 @and(i32* nocapture %a, i32* nocapture readonly %b, i64 %n) {
	; CHECK-LABEL: @and
	; CHECK: vector.body:
	; CHECK: %[[LOAD1:.*]] = load <vscale x 8 x i32>
	; CHECK: %[[LOAD2:.*]] = load <vscale x 8 x i32>
	; CHECK: %[[AND1:.*]] = and <vscale x 8 x i32> %[[LOAD1]]
	; CHECK: %[[AND2:.*]] = and <vscale x 8 x i32> %[[LOAD2]]
	; CHECK: middle.block:
	; CHECK: %[[ABD:.*]] = and <vscale x 8 x i32> %[[ADD2]], %[[AND1]]
	; CHECK-NEXT: call i32 @llvm.vector.reduce.and.nxv8i32(<vscale x 8 x i32> %[[ADD]])
	entry:
	br label %for.body

	for.body: ; preds = %entry, %for.body
	%iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
	%sum.07 = phi i32 [ 2, %entry ], [ %and, %for.body ]
	%arrayidx = getelementptr inbounds i32, i32* %a, i64 %iv
	%0 = load i32, i32* %arrayidx, align 4
	%and = and i32 %0, %sum.07
	%iv.next = add nuw nsw i64 %iv, 1
	%exitcond.not = icmp eq i64 %iv.next, %n
	br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

	for.end: ; preds = %for.body, %entry
	ret i32 %and
	}

	; XOR

	; CHECK-REMARK: vectorized loop (vectorization width: vscale x 8, interleaved count: 2)
	define i32 @xor(i32* nocapture %a, i32* nocapture readonly %b, i64 %n) {
	; CHECK-LABEL: @xor
	; CHECK: vector.body:
	; CHECK: %[[LOAD1:.*]] = load <vscale x 8 x i32>
	; CHECK: %[[LOAD2:.*]] = load <vscale x 8 x i32>
	; CHECK: %[[XOR1:.*]] = xor <vscale x 8 x i32> %[[LOAD1]]
	; CHECK: %[[XOR2:.*]] = xor <vscale x 8 x i32> %[[LOAD2]]
	; CHECK: middle.block:
	; CHECK: %[[XOR:.*]] = xor <vscale x 8 x i32> %[[XOR2]], %[[XOR1]]
	; CHECK-NEXT: call i32 @llvm.vector.reduce.xor.nxv8i32(<vscale x 8 x i32> %[[XOR]])
	entry:
	br label %for.body

	for.body: ; preds = %entry, %for.body
	%iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
	%sum.07 = phi i32 [ 2, %entry ], [ %xor, %for.body ]
	%arrayidx = getelementptr inbounds i32, i32* %a, i64 %iv
	%0 = load i32, i32* %arrayidx, align 4
	%xor = xor i32 %0, %sum.07
	%iv.next = add nuw nsw i64 %iv, 1
	%exitcond.not = icmp eq i64 %iv.next, %n
	br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

	for.end: ; preds = %for.body, %entry
	ret i32 %xor
	}

	; CHECK-REMARK: vectorized loop (vectorization width: vscale x 8, interleaved count: 2)
	; SMIN

	define i32 @smin(i32* nocapture %a, i32* nocapture readonly %b, i64 %n) {
	; CHECK-LABEL: @smin
	; CHECK: vector.body:
	; CHECK: %[[LOAD1:.*]] = load <vscale x 8 x i32>
	; CHECK: %[[LOAD2:.*]] = load <vscale x 8 x i32>
	; CHECK: %[[ICMP1:.*]] = icmp slt <vscale x 8 x i32> %[[LOAD1]]
	; CHECK: %[[ICMP2:.*]] = icmp slt <vscale x 8 x i32> %[[LOAD2]]
	; CHECK: %[[SEL1:.*]] = select <vscale x 8 x i1> %[[ICMP1]], <vscale x 8 x i32> %[[LOAD1]]
	; CHECK: %[[SEL2:.*]] = select <vscale x 8 x i1> %[[ICMP2]], <vscale x 8 x i32> %[[LOAD2]]
	; CHECK: middle.block:
	; CHECK: %[[ICMP:.*]] = icmp slt <vscale x 8 x i32> %[[SEL1]], %[[SEL2]]
	; CHECK-NEXT: %[[SEL:.*]] = select <vscale x 8 x i1> %[[ICMP]], <vscale x 8 x i32> %[[SEL1]], <vscale x 8 x i32> %[[SEL2]]
	; CHECK-NEXT: call i32 @llvm.vector.reduce.smin.nxv8i32(<vscale x 8 x i32> %[[SEL]])
	entry:
	br label %for.body

	for.body: ; preds = %entry, %for.body
	%iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
	%sum.010 = phi i32 [ 2, %entry ], [ %.sroa.speculated, %for.body ]
	%arrayidx = getelementptr inbounds i32, i32* %a, i64 %iv
	%0 = load i32, i32* %arrayidx, align 4
	%cmp.i = icmp slt i32 %0, %sum.010
	%.sroa.speculated = select i1 %cmp.i, i32 %0, i32 %sum.010
	%iv.next = add nuw nsw i64 %iv, 1
	%exitcond.not = icmp eq i64 %iv.next, %n
	br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

	for.end:
	ret i32 %.sroa.speculated
	}

	; CHECK-REMARK: vectorized loop (vectorization width: vscale x 8, interleaved count: 2)
	; UMAX

	define i32 @umax(i32* nocapture %a, i32* nocapture readonly %b, i64 %n) {
	; CHECK-LABEL: @umax
	; CHECK: vector.body:
	; CHECK: %[[LOAD1:.*]] = load <vscale x 8 x i32>
	; CHECK: %[[LOAD2:.*]] = load <vscale x 8 x i32>
	; CHECK: %[[ICMP1:.*]] = icmp ugt <vscale x 8 x i32> %[[LOAD1]]
	; CHECK: %[[ICMP2:.*]] = icmp ugt <vscale x 8 x i32> %[[LOAD2]]
	; CHECK: %[[SEL1:.*]] = select <vscale x 8 x i1> %[[ICMP1]], <vscale x 8 x i32> %[[LOAD1]]
	; CHECK: %[[SEL2:.*]] = select <vscale x 8 x i1> %[[ICMP2]], <vscale x 8 x i32> %[[LOAD2]]
	; CHECK: middle.block:
	; CHECK: %[[ICMP:.*]] = icmp ugt <vscale x 8 x i32> %[[SEL1]], %[[SEL2]]
	; CHECK-NEXT: %[[SEL:.*]] = select <vscale x 8 x i1> %[[ICMP]], <vscale x 8 x i32> %[[SEL1]], <vscale x 8 x i32> %[[SEL2]]
	; CHECK-NEXT: call i32 @llvm.vector.reduce.umax.nxv8i32(<vscale x 8 x i32> %[[SEL]])
	entry:
	br label %for.body

	for.body: ; preds = %entry, %for.body
	%iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
	%sum.010 = phi i32 [ 2, %entry ], [ %.sroa.speculated, %for.body ]
	%arrayidx = getelementptr inbounds i32, i32* %a, i64 %iv
	%0 = load i32, i32* %arrayidx, align 4
	%cmp.i = icmp ugt i32 %0, %sum.010
	%.sroa.speculated = select i1 %cmp.i, i32 %0, i32 %sum.010
	%iv.next = add nuw nsw i64 %iv, 1
	%exitcond.not = icmp eq i64 %iv.next, %n
	br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

	for.end:
	ret i32 %.sroa.speculated
	}

	; CHECK-REMARK: vectorized loop (vectorization width: vscale x 8, interleaved count: 2)
	; FADD (FAST)

	define float @fadd_fast(float* noalias nocapture readonly %a, i64 %n) {
	; CHECK-LABEL: @fadd_fast
	; CHECK: vector.body:
	; CHECK: %[[LOAD1:.*]] = load <vscale x 8 x float>
	; CHECK: %[[LOAD2:.*]] = load <vscale x 8 x float>
	; CHECK: %[[ADD1:.*]] = fadd fast <vscale x 8 x float> %[[LOAD1]]
	; CHECK: %[[ADD2:.*]] = fadd fast <vscale x 8 x float> %[[LOAD2]]
	; CHECK: middle.block:
	; CHECK: %[[ADD:.*]] = fadd fast <vscale x 8 x float> %[[ADD2]], %[[ADD1]]
	; CHECK-NEXT: call fast float @llvm.vector.reduce.fadd.nxv8f32(float -0.000000e+00, <vscale x 8 x float> %[[ADD]])
	entry:
	br label %for.body

	for.body:
	%iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
	%sum.07 = phi float [ 0.000000e+00, %entry ], [ %add, %for.body ]
	%arrayidx = getelementptr inbounds float, float* %a, i64 %iv
	%0 = load float, float* %arrayidx, align 4
	%add = fadd fast float %0, %sum.07
	%iv.next = add nuw nsw i64 %iv, 1
	%exitcond.not = icmp eq i64 %iv.next, %n
	br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

	for.end:
	ret float %add
	}

	; CHECK-REMARK: Scalable vectorization not supported for the reduction operations found in this loop. Using fixed-width vectorization instead.
	; CHECK-REMARK: vectorized loop (vectorization width: 8, interleaved count: 2)
	define bfloat @fadd_fast_bfloat(bfloat* noalias nocapture readonly %a, i64 %n) {
	; CHECK-LABEL: @fadd_fast_bfloat
	; CHECK: vector.body:
	; CHECK: %[[LOAD1:.*]] = load <8 x bfloat>
	; CHECK: %[[LOAD2:.*]] = load <8 x bfloat>
	; CHECK: %[[FADD1:.*]] = fadd fast <8 x bfloat> %[[LOAD1]]
	; CHECK: %[[FADD2:.*]] = fadd fast <8 x bfloat> %[[LOAD2]]
	; CHECK: middle.block:
	; CHECK: %[[RDX:.*]] = fadd fast <8 x bfloat> %[[FADD2]], %[[FADD1]]
	; CHECK: call fast bfloat @llvm.vector.reduce.fadd.v8bf16(bfloat 0xR8000, <8 x bfloat> %[[RDX]])
	entry:
	br label %for.body

	for.body:
	%iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
	%sum.07 = phi bfloat [ 0.000000e+00, %entry ], [ %add, %for.body ]
	%arrayidx = getelementptr inbounds bfloat, bfloat* %a, i64 %iv
	%0 = load bfloat, bfloat* %arrayidx, align 4
	%add = fadd fast bfloat %0, %sum.07
	%iv.next = add nuw nsw i64 %iv, 1
	%exitcond.not = icmp eq i64 %iv.next, %n
	br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

	for.end:
	ret bfloat %add
	}

	; FMIN (FAST)

	; CHECK-REMARK: vectorized loop (vectorization width: vscale x 8, interleaved count: 2)
	define float @fmin_fast(float* noalias nocapture readonly %a, i64 %n) #0 {
	; CHECK-LABEL: @fmin_fast
	; CHECK: vector.body:
	; CHECK: %[[LOAD1:.*]] = load <vscale x 8 x float>
	; CHECK: %[[LOAD2:.*]] = load <vscale x 8 x float>
	; CHECK: %[[FCMP1:.*]] = fcmp olt <vscale x 8 x float> %[[LOAD1]]
	; CHECK: %[[FCMP2:.*]] = fcmp olt <vscale x 8 x float> %[[LOAD2]]
	; CHECK: %[[SEL1:.*]] = select <vscale x 8 x i1> %[[FCMP1]], <vscale x 8 x float> %[[LOAD1]]
	; CHECK: %[[SEL2:.*]] = select <vscale x 8 x i1> %[[FCMP2]], <vscale x 8 x float> %[[LOAD2]]
	; CHECK: middle.block:
	; CHECK: %[[FCMP:.*]] = fcmp olt <vscale x 8 x float> %[[SEL1]], %[[SEL2]]
	; CHECK-NEXT: %[[SEL:.*]] = select <vscale x 8 x i1> %[[FCMP]], <vscale x 8 x float> %[[SEL1]], <vscale x 8 x float> %[[SEL2]]
	; CHECK-NEXT: call float @llvm.vector.reduce.fmin.nxv8f32(<vscale x 8 x float> %[[SEL]])
	entry:
	br label %for.body

	for.body:
	%iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
	%sum.07 = phi float [ 0.000000e+00, %entry ], [ %.sroa.speculated, %for.body ]
	%arrayidx = getelementptr inbounds float, float* %a, i64 %iv
	%0 = load float, float* %arrayidx, align 4
	%cmp.i = fcmp olt float %0, %sum.07
	%.sroa.speculated = select i1 %cmp.i, float %0, float %sum.07
	%iv.next = add nuw nsw i64 %iv, 1
	%exitcond.not = icmp eq i64 %iv.next, %n
	br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

	for.end:
	ret float %.sroa.speculated
	}

	; FMAX (FAST)

	; CHECK-REMARK: vectorized loop (vectorization width: vscale x 8, interleaved count: 2)
	define float @fmax_fast(float* noalias nocapture readonly %a, i64 %n) #0 {
	; CHECK-LABEL: @fmax_fast
	; CHECK: vector.body:
	; CHECK: %[[LOAD1:.*]] = load <vscale x 8 x float>
	; CHECK: %[[LOAD2:.*]] = load <vscale x 8 x float>
	; CHECK: %[[FCMP1:.*]] = fcmp fast ogt <vscale x 8 x float> %[[LOAD1]]
	; CHECK: %[[FCMP2:.*]] = fcmp fast ogt <vscale x 8 x float> %[[LOAD2]]
	; CHECK: %[[SEL1:.*]] = select <vscale x 8 x i1> %[[FCMP1]], <vscale x 8 x float> %[[LOAD1]]
	; CHECK: %[[SEL2:.*]] = select <vscale x 8 x i1> %[[FCMP2]], <vscale x 8 x float> %[[LOAD2]]
	; CHECK: middle.block:
	; CHECK: %[[FCMP:.*]] = fcmp fast ogt <vscale x 8 x float> %[[SEL1]], %[[SEL2]]
	; CHECK-NEXT: %[[SEL:.*]] = select fast <vscale x 8 x i1> %[[FCMP]], <vscale x 8 x float> %[[SEL1]], <vscale x 8 x float> %[[SEL2]]
	; CHECK-NEXT: call fast float @llvm.vector.reduce.fmax.nxv8f32(<vscale x 8 x float> %[[SEL]])
	entry:
	br label %for.body

	for.body:
	%iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
	%sum.07 = phi float [ 0.000000e+00, %entry ], [ %.sroa.speculated, %for.body ]
	%arrayidx = getelementptr inbounds float, float* %a, i64 %iv
	%0 = load float, float* %arrayidx, align 4
	%cmp.i = fcmp fast ogt float %0, %sum.07
	%.sroa.speculated = select i1 %cmp.i, float %0, float %sum.07
	%iv.next = add nuw nsw i64 %iv, 1
	%exitcond.not = icmp eq i64 %iv.next, %n
	br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

	for.end:
	ret float %.sroa.speculated
	}

	; Reduction cannot be vectorized

	; MUL

	; CHECK-REMARK: Scalable vectorization not supported for the reduction operations found in this loop. Using fixed-width vectorization instead.
	; CHECK-REMARK: vectorized loop (vectorization width: 8, interleaved count: 2)
	define i32 @mul(i32* nocapture %a, i32* nocapture readonly %b, i64 %n) {
	; CHECK-LABEL: @mul
	; CHECK: vector.body:
	; CHECK: %[[LOAD1:.*]] = load <8 x i32>
	; CHECK: %[[LOAD2:.*]] = load <8 x i32>
	; CHECK: %[[MUL1:.*]] = mul <8 x i32> %[[LOAD1]]
	; CHECK: %[[MUL2:.*]] = mul <8 x i32> %[[LOAD2]]
	; CHECK: middle.block:
	; CHECK: %[[RDX:.*]] = mul <8 x i32> %[[MUL2]], %[[MUL1]]
	; CHECK: call i32 @llvm.vector.reduce.mul.v8i32(<8 x i32> %[[RDX]])
	entry:
	br label %for.body

	for.body: ; preds = %entry, %for.body
	%iv = phi i64 [ 0, %entry ], [ %iv.next, %for.body ]
	%sum.07 = phi i32 [ 2, %entry ], [ %mul, %for.body ]
	%arrayidx = getelementptr inbounds i32, i32* %a, i64 %iv
	%0 = load i32, i32* %arrayidx, align 4
	%mul = mul nsw i32 %0, %sum.07
	%iv.next = add nuw nsw i64 %iv, 1
	%exitcond.not = icmp eq i64 %iv.next, %n
	br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

	for.end: ; preds = %for.body, %entry
	ret i32 %mul
	}

	; Note: This test was added to ensure we always check the legality of reductions (end emit a warning if necessary) before checking for memory dependencies
	; CHECK-REMARK: Scalable vectorization not supported for the reduction operations found in this loop. Using fixed-width vectorization instead.
	; CHECK-REMARK: vectorized loop (vectorization width: 8, interleaved count: 2)
	define i32 @memory_dependence(i32* noalias nocapture %a, i32* noalias nocapture readonly %b, i64 %n) {
	; CHECK-LABEL: @memory_dependence
	; CHECK: vector.body:
	; CHECK: %[[LOAD1:.*]] = load <8 x i32>
	; CHECK: %[[LOAD2:.*]] = load <8 x i32>
	; CHECK: %[[LOAD3:.*]] = load <8 x i32>
	; CHECK: %[[LOAD4:.*]] = load <8 x i32>
	; CHECK: %[[ADD1:.*]] = add nsw <8 x i32> %[[LOAD3]], %[[LOAD1]]
	; CHECK: %[[ADD2:.*]] = add nsw <8 x i32> %[[LOAD4]], %[[LOAD2]]
	; CHECK: %[[MUL1:.*]] = mul <8 x i32> %[[LOAD3]]
	; CHECK: %[[MUL2:.*]] = mul <8 x i32> %[[LOAD4]]
	; CHECK: middle.block:
	; CHECK: %[[RDX:.*]] = mul <8 x i32> %[[MUL2]], %[[MUL1]]
	; CHECK: call i32 @llvm.vector.reduce.mul.v8i32(<8 x i32> %[[RDX]])
	entry:
	br label %for.body

	for.body:
	%i = phi i64 [ %inc, %for.body ], [ 0, %entry ]
	%sum = phi i32 [ %mul, %for.body ], [ 2, %entry ]
	%arrayidx = getelementptr inbounds i32, i32* %a, i64 %i
	%0 = load i32, i32* %arrayidx, align 4
	%arrayidx1 = getelementptr inbounds i32, i32* %b, i64 %i
	%1 = load i32, i32* %arrayidx1, align 4
	%add = add nsw i32 %1, %0
	%add2 = add nuw nsw i64 %i, 32
	%arrayidx3 = getelementptr inbounds i32, i32* %a, i64 %add2
	store i32 %add, i32* %arrayidx3, align 4
	%mul = mul nsw i32 %1, %sum
	%inc = add nuw nsw i64 %i, 1
	%exitcond.not = icmp eq i64 %inc, %n
	br i1 %exitcond.not, label %for.end, label %for.body, !llvm.loop !0

	for.end:
	ret i32 %mul
	}

	attributes #0 = { "no-nans-fp-math"="true" "no-signed-zeros-fp-math"="true" }

	!0 = distinct !{!0, !1, !2, !3, !4}
	!1 = !{!"llvm.loop.vectorize.width", i32 8}
	!2 = !{!"llvm.loop.vectorize.scalable.enable", i1 true}
	!3 = !{!"llvm.loop.interleave.count", i32 2}
	!4 = !{!"llvm.loop.vectorize.enable", i1 true}