| /* | |
| Bullet Continuous Collision Detection and Physics Library | |
| Copyright (c) 2003-2006 Erwin Coumans http://continuousphysics.com/Bullet/ | |
| This software is provided 'as-is', without any express or implied warranty. | |
| In no event will the authors be held liable for any damages arising from the use of this software. | |
| Permission is granted to anyone to use this software for any purpose, | |
| including commercial applications, and to alter it and redistribute it freely, | |
| subject to the following restrictions: | |
| 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. | |
| 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. | |
| 3. This notice may not be removed or altered from any source distribution. | |
| */ | |
| #include "BulletSoftBody/btSoftBodyRigidBodyCollisionConfiguration.h" | |
| #include "BulletSoftBody/btSoftRigidCollisionAlgorithm.h" | |
| #include "BulletSoftBody/btSoftBodyConcaveCollisionAlgorithm.h" | |
| #include "BulletSoftBody/btSoftSoftCollisionAlgorithm.h" | |
| #include "LinearMath/btPoolAllocator.h" | |
| #define ENABLE_SOFTBODY_CONCAVE_COLLISIONS 1 | |
| btSoftBodyRigidBodyCollisionConfiguration::btSoftBodyRigidBodyCollisionConfiguration(const btDefaultCollisionConstructionInfo& constructionInfo) | |
| :btDefaultCollisionConfiguration(constructionInfo) | |
| { | |
| void* mem; | |
| mem = btAlignedAlloc(sizeof(btSoftSoftCollisionAlgorithm::CreateFunc),16); | |
| m_softSoftCreateFunc = new(mem) btSoftSoftCollisionAlgorithm::CreateFunc; | |
| mem = btAlignedAlloc(sizeof(btSoftRigidCollisionAlgorithm::CreateFunc),16); | |
| m_softRigidConvexCreateFunc = new(mem) btSoftRigidCollisionAlgorithm::CreateFunc; | |
| mem = btAlignedAlloc(sizeof(btSoftRigidCollisionAlgorithm::CreateFunc),16); | |
| m_swappedSoftRigidConvexCreateFunc = new(mem) btSoftRigidCollisionAlgorithm::CreateFunc; | |
| m_swappedSoftRigidConvexCreateFunc->m_swapped=true; | |
| #ifdef ENABLE_SOFTBODY_CONCAVE_COLLISIONS | |
| mem = btAlignedAlloc(sizeof(btSoftBodyConcaveCollisionAlgorithm::CreateFunc),16); | |
| m_softRigidConcaveCreateFunc = new(mem) btSoftBodyConcaveCollisionAlgorithm::CreateFunc; | |
| mem = btAlignedAlloc(sizeof(btSoftBodyConcaveCollisionAlgorithm::CreateFunc),16); | |
| m_swappedSoftRigidConcaveCreateFunc = new(mem) btSoftBodyConcaveCollisionAlgorithm::SwappedCreateFunc; | |
| m_swappedSoftRigidConcaveCreateFunc->m_swapped=true; | |
| #endif | |
| //replace pool by a new one, with potential larger size | |
| if (m_ownsCollisionAlgorithmPool && m_collisionAlgorithmPool) | |
| { | |
| int curElemSize = m_collisionAlgorithmPool->getElementSize(); | |
| ///calculate maximum element size, big enough to fit any collision algorithm in the memory pool | |
| int maxSize0 = sizeof(btSoftSoftCollisionAlgorithm); | |
| int maxSize1 = sizeof(btSoftRigidCollisionAlgorithm); | |
| int maxSize2 = sizeof(btSoftBodyConcaveCollisionAlgorithm); | |
| int collisionAlgorithmMaxElementSize = btMax(maxSize0,maxSize1); | |
| collisionAlgorithmMaxElementSize = btMax(collisionAlgorithmMaxElementSize,maxSize2); | |
| if (collisionAlgorithmMaxElementSize > curElemSize) | |
| { | |
| m_collisionAlgorithmPool->~btPoolAllocator(); | |
| btAlignedFree(m_collisionAlgorithmPool); | |
| void* mem = btAlignedAlloc(sizeof(btPoolAllocator),16); | |
| m_collisionAlgorithmPool = new(mem) btPoolAllocator(collisionAlgorithmMaxElementSize,constructionInfo.m_defaultMaxCollisionAlgorithmPoolSize); | |
| } | |
| } | |
| } | |
| btSoftBodyRigidBodyCollisionConfiguration::~btSoftBodyRigidBodyCollisionConfiguration() | |
| { | |
| m_softSoftCreateFunc->~btCollisionAlgorithmCreateFunc(); | |
| btAlignedFree( m_softSoftCreateFunc); | |
| m_softRigidConvexCreateFunc->~btCollisionAlgorithmCreateFunc(); | |
| btAlignedFree( m_softRigidConvexCreateFunc); | |
| m_swappedSoftRigidConvexCreateFunc->~btCollisionAlgorithmCreateFunc(); | |
| btAlignedFree( m_swappedSoftRigidConvexCreateFunc); | |
| #ifdef ENABLE_SOFTBODY_CONCAVE_COLLISIONS | |
| m_softRigidConcaveCreateFunc->~btCollisionAlgorithmCreateFunc(); | |
| btAlignedFree( m_softRigidConcaveCreateFunc); | |
| m_swappedSoftRigidConcaveCreateFunc->~btCollisionAlgorithmCreateFunc(); | |
| btAlignedFree( m_swappedSoftRigidConcaveCreateFunc); | |
| #endif | |
| } | |
| ///creation of soft-soft and soft-rigid, and otherwise fallback to base class implementation | |
| btCollisionAlgorithmCreateFunc* btSoftBodyRigidBodyCollisionConfiguration::getCollisionAlgorithmCreateFunc(int proxyType0,int proxyType1) | |
| { | |
| ///try to handle the softbody interactions first | |
| if ((proxyType0 == SOFTBODY_SHAPE_PROXYTYPE ) && (proxyType1==SOFTBODY_SHAPE_PROXYTYPE)) | |
| { | |
| return m_softSoftCreateFunc; | |
| } | |
| ///softbody versus convex | |
| if (proxyType0 == SOFTBODY_SHAPE_PROXYTYPE && btBroadphaseProxy::isConvex(proxyType1)) | |
| { | |
| return m_softRigidConvexCreateFunc; | |
| } | |
| ///convex versus soft body | |
| if (btBroadphaseProxy::isConvex(proxyType0) && proxyType1 == SOFTBODY_SHAPE_PROXYTYPE ) | |
| { | |
| return m_swappedSoftRigidConvexCreateFunc; | |
| } | |
| #ifdef ENABLE_SOFTBODY_CONCAVE_COLLISIONS | |
| ///softbody versus convex | |
| if (proxyType0 == SOFTBODY_SHAPE_PROXYTYPE && btBroadphaseProxy::isConcave(proxyType1)) | |
| { | |
| return m_softRigidConcaveCreateFunc; | |
| } | |
| ///convex versus soft body | |
| if (btBroadphaseProxy::isConcave(proxyType0) && proxyType1 == SOFTBODY_SHAPE_PROXYTYPE ) | |
| { | |
| return m_swappedSoftRigidConcaveCreateFunc; | |
| } | |
| #endif | |
| ///fallback to the regular rigid collision shape | |
| return btDefaultCollisionConfiguration::getCollisionAlgorithmCreateFunc(proxyType0,proxyType1); | |
| } |