| //===-- Definition of macros from termios.h -------------------------------===// |
| // |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. |
| // See https://llvm.org/LICENSE.txt for license information. |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #ifndef __LLVM_LIBC_MACROS_LINUX_TERMIOS_MACROS_H |
| #define __LLVM_LIBC_MACROS_LINUX_TERMIOS_MACROS_H |
| |
| // Below are generic definitions of symbolic bit-masks, modes etc. They serve |
| // most architectures including x86_64, aarch64 but have to be adjusted for few |
| // architectures MIPS. |
| |
| #define NCCS 32 |
| |
| // Bit-masks for the c_iflag field of struct termios. |
| #define IGNBRK 0000001 // Ignore break condition |
| #define BRKINT 0000002 // Signal interrupt on break |
| #define IGNPAR 0000004 // Ignore characters with parity errors |
| #define PARMRK 0000010 // Mark parity and framing errors |
| #define INPCK 0000020 // Enable input parity check |
| #define ISTRIP 0000040 // Strip 8th bit off characters |
| #define INLCR 0000100 // Map NL to CR on input |
| #define IGNCR 0000200 // Ignore CR |
| #define ICRNL 0000400 // Map CR to NL on input |
| #define IUCLC 0001000 // Map uppercase characters to lowercase on input |
| #define IXON 0002000 // Enable start/stop output control |
| #define IXANY 0004000 // Enable any character to restart output |
| #define IXOFF 0010000 // Enable start/stop input control |
| #define IMAXBEL 0020000 // Ring bell when input queue is full |
| #define IUTF8 0040000 // Input is UTF8 (not in POSIX) |
| |
| // Bit-masks for the c_oflag field of struct termios. |
| #define OPOST 0000001 // Post-process output |
| #define OLCUC 0000002 // Map lowercase characters to uppercase on output |
| #define ONLCR 0000004 // Map NL to CR-NL on output |
| #define OCRNL 0000010 // Map CR to NL on output |
| #define ONOCR 0000020 // No CR output at column 0 |
| #define ONLRET 0000040 // NL performs CR function |
| #define OFILL 0000100 // Use fill characters for delay |
| #define OFDEL 0000200 // Fill is DEL |
| #define NLDLY 0000400 // Select newline delays |
| #define NL0 0000000 // Newline type 0 |
| #define NL1 0000400 // Newline type 1 |
| #define CRDLY 0003000 // Select carriage-return delays |
| #define CR0 0000000 // Carriage-return delay type 0 |
| #define CR1 0001000 // Carriage-return delay type 1 |
| #define CR2 0002000 // Carriage-return delay type 2 |
| #define CR3 0003000 // Carriage-return delay type 3 |
| #define TABDLY 0014000 // Select horizontal-tab delays |
| #define TAB0 0000000 // Horizontal-tab delay type 0 |
| #define TAB1 0004000 // Horizontal-tab delay type 1 |
| #define TAB2 0010000 // Horizontal-tab delay type 2 |
| #define TAB3 0014000 // Expand tabs to spaces |
| #define BSDLY 0020000 // Select backspace delays |
| #define BS0 0000000 // Backspace-delay type 0 |
| #define BS1 0020000 // Backspace-delay type 1 |
| #define FFDLY 0100000 // Select form-feed delays |
| #define FF0 0000000 // Form-feed delay type 0 |
| #define FF1 0100000 // Form-feed delay type 1 |
| #define VTDLY 0040000 // Select vertical-tab delays |
| #define VT0 0000000 // Vertical-tab delay type 0 |
| #define VT1 0040000 // Vertical-tab delay type 1 |
| #define XTABS 0014000 |
| |
| // Symbolic subscripts for the c_cc array. |
| #define VINTR 0 |
| #define VQUIT 1 |
| #define VERASE 2 |
| #define VKILL 3 |
| #define VEOF 4 |
| #define VTIME 5 |
| #define VMIN 6 |
| #define VSWTC 7 |
| #define VSTART 8 |
| #define VSTOP 9 |
| #define VSUSP 10 |
| #define VEOL 11 |
| #define VREPRINT 12 |
| #define VDISCARD 13 |
| #define VWERASE 14 |
| #define VLNEXT 15 |
| #define VEOL2 16 |
| |
| // Baud rate related definitions |
| #define CBAUD 000000010017 // Baud speed mask |
| #define CBAUDX 000000010000 // Extra baud speed mask |
| #define CIBAUD 002003600000 |
| #define CMSPAR 010000000000 |
| #define CRTSCTS 020000000000 |
| // Baud rates with values representable by the speed_t type. |
| #define B0 0000000 // Implies hang-up |
| // A symbol B<NN+> below indicates a baud rate of <NN+>. |
| #define B50 0000001 |
| #define B75 0000002 |
| #define B110 0000003 |
| #define B134 0000004 |
| #define B150 0000005 |
| #define B200 0000006 |
| #define B300 0000007 |
| #define B600 0000010 |
| #define B1200 0000011 |
| #define B1800 0000012 |
| #define B2400 0000013 |
| #define B4800 0000014 |
| #define B9600 0000015 |
| #define B19200 0000016 |
| #define B38400 0000017 |
| // Extra baud rates |
| #define B57600 0010001 |
| #define B115200 0010002 |
| #define B230400 0010003 |
| #define B460800 0010004 |
| #define B500000 0010005 |
| #define B576000 0010006 |
| #define B921600 0010007 |
| #define B1000000 0010010 |
| #define B1152000 0010011 |
| #define B1500000 0010012 |
| #define B2000000 0010013 |
| #define B2500000 0010014 |
| #define B3000000 0010015 |
| #define B3500000 0010016 |
| #define B4000000 0010017 |
| |
| // Control mode bits for use in the c_cflag field of struct termios. |
| #define CSIZE 0000060 // Mask for character size bits |
| #define CS5 0000000 |
| #define CS6 0000020 |
| #define CS7 0000040 |
| #define CS8 0000060 |
| #define CSTOPB 0000100 // Send two bits, else one |
| #define CREAD 0000200 // Enable receiver |
| #define PARENB 0000400 // Parity enable |
| #define PARODD 0001000 // Odd parity, else even |
| #define HUPCL 0002000 // Hang up on last close |
| #define CLOCAL 0004000 // Ignore modem status lines |
| |
| // Local mode bits for use in the c_lflag field of struct termios. |
| #define ISIG 0000001 // Enable signals |
| #define ICANON 0000002 // Canonical input (erase and kill processing) |
| #define ECHO 0000010 // Enable echo |
| #define ECHOE 0000020 // Echo erase character as error-correcting backspace |
| #define ECHOK 0000040 // Echo KILL |
| #define ECHONL 0000100 // Echo NL |
| #define NOFLSH 0000200 // Disable flush after interrupt or quit |
| #define TOSTOP 0000400 // Send SIGTTOU for background output |
| |
| // Attribute selection |
| #define TCSANOW 0 // Change attributes immediately |
| #define TCSADRAIN 1 // Change attributes when output has drained |
| #define TCSAFLUSH 2 // Same as TCSADRAIN and flush pending Output |
| |
| // Symbolic constants for use with tcflush function. |
| #define TCIFLUSH 0 // Flush pending input |
| #define TCIOFLUSH 1 // Flush pending input and unstransmitted output |
| #define TCOFLUSH 2 // Flush unstransmitted output |
| |
| // Symbolic constantf for use with tcflow function. |
| #define TCOOFF 0 // Transmit a STOP character, intended to suspend input data |
| #define TCOON 1 // Transmit a START character, intended to restart input data |
| #define TCIOFF 2 // Suspend output |
| #define TCION 3 // Restart output |
| |
| #endif // __LLVM_LIBC_MACROS_LINUX_TERMIOS_MACROS_H |