| llvm-readobj - LLVM Object Reader |
| ================================= |
| |
| .. program:: llvm-readobj |
| |
| SYNOPSIS |
| -------- |
| |
| :program:`llvm-readobj` [*options*] [*input...*] |
| |
| DESCRIPTION |
| ----------- |
| |
| The :program:`llvm-readobj` tool displays low-level format-specific information |
| about one or more object files. |
| |
| If ``input`` is "``-``" or omitted, :program:`llvm-readobj` reads from standard |
| input. Otherwise, it will read from the specified ``filenames``. |
| |
| DIFFERENCES TO LLVM-READELF |
| --------------------------- |
| |
| :program:`llvm-readelf` is an alias for the :manpage:`llvm-readobj` tool with a |
| slightly different command-line interface and output that is GNU compatible. |
| Following is a list of differences between :program:`llvm-readelf` and |
| :program:`llvm-readobj`: |
| |
| - :program:`llvm-readelf` uses `GNU` for the :option:`--elf-output-style` option |
| by default. :program:`llvm-readobj` uses `LLVM`. |
| - :program:`llvm-readelf` allows single-letter grouped flags (e.g. |
| ``llvm-readelf -SW`` is the same as ``llvm-readelf -S -W``). |
| :program:`llvm-readobj` does not allow grouping. |
| - :program:`llvm-readelf` provides :option:`-s` as an alias for |
| :option:`--symbols`, for GNU :program:`readelf` compatibility, whereas it is |
| an alias for :option:`--section-headers` in :program:`llvm-readobj`. |
| - :program:`llvm-readobj` provides ``-t`` as an alias for :option:`--symbols`. |
| :program:`llvm-readelf` does not. |
| - :program:`llvm-readobj` provides ``--sr``, ``--sd``, ``--st`` and ``--dt`` as |
| aliases for :option:`--section-relocations`, :option:`--section-data`, |
| :option:`--section-symbols` and :option:`--dyn-symbols` respectively. |
| :program:`llvm-readelf` does not provide these aliases, to avoid conflicting |
| with grouped flags. |
| |
| GENERAL AND MULTI-FORMAT OPTIONS |
| -------------------------------- |
| |
| These options are applicable to more than one file format, or are unrelated to |
| file formats. |
| |
| .. option:: --all |
| |
| Equivalent to specifying all the main display options relevant to the file |
| format. |
| |
| .. option:: --addrsig |
| |
| Display the address-significance table. |
| |
| .. option:: --color |
| |
| Use colors in the output for warnings and errors. |
| |
| .. option:: --expand-relocs |
| |
| When used with :option:`--relocations`, display each relocation in an expanded |
| multi-line format. |
| |
| .. option:: --file-headers, -h |
| |
| Display file headers. |
| |
| .. option:: --headers, -e |
| |
| Equivalent to setting: :option:`--file-headers`, :option:`--program-headers`, |
| and :option:`--sections`. |
| |
| .. option:: --help |
| |
| Display a summary of command line options. |
| |
| .. option:: --help-list |
| |
| Display an uncategorized summary of command line options. |
| |
| .. option:: --hex-dump=<section[,section,...]>, -x |
| |
| Display the specified section(s) as hexadecimal bytes. ``section`` may be a |
| section index or section name. |
| |
| .. option:: --needed-libs |
| |
| Display the needed libraries. |
| |
| .. option:: --relocations, --relocs, -r |
| |
| Display the relocation entries in the file. |
| |
| .. option:: --sections, --section-headers, -s, -S |
| |
| Display all sections. |
| |
| .. option:: --section-data, --sd |
| |
| When used with :option:`--sections`, display section data for each section |
| shown. This option has no effect for GNU style output. |
| |
| .. option:: --section-relocations, --sr |
| |
| When used with :option:`--sections`, display relocations for each section |
| shown. This option has no effect for GNU style output. |
| |
| .. option:: --section-symbols, --st |
| |
| When used with :option:`--sections`, display symbols for each section shown. |
| This option has no effect for GNU style output. |
| |
| .. option:: --stackmap |
| |
| Display contents of the stackmap section. |
| |
| .. option:: --string-dump=<section[,section,...]>, -p |
| |
| Display the specified section(s) as a list of strings. ``section`` may be a |
| section index or section name. |
| |
| .. option:: --symbols, --syms, -t |
| |
| Display the symbol table. |
| |
| .. option:: --unwind, -u |
| |
| Display unwind information. |
| |
| .. option:: --version |
| |
| Display the version of the :program:`llvm-readobj` executable. |
| |
| .. option:: @<FILE> |
| |
| Read command-line options from response file `<FILE>`. |
| |
| ELF SPECIFIC OPTIONS |
| -------------------- |
| |
| The following options are implemented only for the ELF file format. |
| |
| .. option:: --arch-specific, -A |
| |
| Display architecture-specific information, e.g. the ARM attributes section on ARM. |
| |
| .. option:: --demangle, -C |
| |
| Display demangled symbol names in the output. |
| |
| .. option:: --dependent-libraries |
| |
| Display the dependent libraries section. |
| |
| .. option:: --dyn-relocations |
| |
| Display the dynamic relocation entries. |
| |
| .. option:: --dyn-symbols, --dyn-syms, --dt |
| |
| Display the dynamic symbol table. |
| |
| .. option:: --dynamic-table, --dynamic, -d |
| |
| Display the dynamic table. |
| |
| .. option:: --elf-cg-profile |
| |
| Display the callgraph profile section. |
| |
| .. option:: --elf-hash-histogram, --histogram, -I |
| |
| Display a bucket list histogram for dynamic symbol hash tables. |
| |
| .. option:: --elf-linker-options |
| |
| Display the linker options section. |
| |
| .. option:: --elf-output-style=<value> |
| |
| Format ELF information in the specified style. Valid options are ``LLVM`` and |
| ``GNU``. ``LLVM`` output (the default) is an expanded and structured format, |
| whilst ``GNU`` output mimics the equivalent GNU :program:`readelf` output. |
| |
| .. option:: --elf-section-groups, --section-groups, -g |
| |
| Display section groups. |
| |
| .. option:: --gnu-hash-table |
| |
| Display the GNU hash table for dynamic symbols. |
| |
| .. option:: --hash-symbols |
| |
| Display the expanded hash table with dynamic symbol data. |
| |
| .. option:: --hash-table |
| |
| Display the hash table for dynamic symbols. |
| |
| .. option:: --notes, -n |
| |
| Display all notes. |
| |
| .. option:: --program-headers, --segments, -l |
| |
| Display the program headers. |
| |
| .. option:: --raw-relr |
| |
| Do not decode relocations in RELR relocation sections when displaying them. |
| |
| .. option:: --section-mapping |
| |
| Display the section to segment mapping. |
| |
| .. option:: --stack-sizes |
| |
| Display the contents of the stack sizes section(s), i.e. pairs of function |
| names and the size of their stack frames. Currently only implemented for GNU |
| style output. |
| |
| .. option:: --version-info, -V |
| |
| Display version sections. |
| |
| MACH-O SPECIFIC OPTIONS |
| ----------------------- |
| |
| The following options are implemented only for the Mach-O file format. |
| |
| .. option:: --macho-data-in-code |
| |
| Display the Data in Code command. |
| |
| .. option:: --macho-dsymtab |
| |
| Display the Dsymtab command. |
| |
| .. option:: --macho-indirect-symbols |
| |
| Display indirect symbols. |
| |
| .. option:: --macho-linker-options |
| |
| Display the Mach-O-specific linker options. |
| |
| .. option:: --macho-segment |
| |
| Display the Segment command. |
| |
| .. option:: --macho-version-min |
| |
| Display the version min command. |
| |
| PE/COFF SPECIFIC OPTIONS |
| ------------------------ |
| |
| The following options are implemented only for the PE/COFF file format. |
| |
| .. option:: --codeview |
| |
| Display CodeView debug information. |
| |
| .. option:: --codeview-ghash |
| |
| Enable global hashing for CodeView type stream de-duplication. |
| |
| .. option:: --codeview-merged-types |
| |
| Display the merged CodeView type stream. |
| |
| .. option:: --codeview-subsection-bytes |
| |
| Dump raw contents of CodeView debug sections and records. |
| |
| .. option:: --coff-basereloc |
| |
| Display the .reloc section. |
| |
| .. option:: --coff-debug-directory |
| |
| Display the debug directory. |
| |
| .. option:: --coff-directives |
| |
| Display the .drectve section. |
| |
| .. option:: --coff-exports |
| |
| Display the export table. |
| |
| .. option:: --coff-imports |
| |
| Display the import table. |
| |
| .. option:: --coff-load-config |
| |
| Display the load config. |
| |
| .. option:: --coff-resources |
| |
| Display the .rsrc section. |
| |
| EXIT STATUS |
| ----------- |
| |
| :program:`llvm-readobj` returns 0 under normal operation. It returns a non-zero |
| exit code if there were any errors. |
| |
| SEE ALSO |
| -------- |
| |
| :manpage:`llvm-nm(1)`, :manpage:`llvm-objdump(1)`, :manpage:`llvm-readelf(1)` |