llvm/lib/Target/AArch64/AArch64MIPeepholeOpt.cpp

//===- AArch64MIPeepholeOpt.cpp - AArch64 MI peephole optimization pass ---===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
//
// This pass performs below peephole optimizations on MIR level.
//
// 1. MOVi32imm + (ANDS?|EOR|ORR)Wrr ==> (AND|EOR|ORR)Wri + (ANDS?|EOR|ORR)Wri
//    MOVi64imm + (ANDS?|EOR|ORR)Xrr ==> (AND|EOR|ORR)Xri + (ANDS?|EOR|ORR)Xri
//
// 2. MOVi32imm + ADDWrr ==> ADDWRi + ADDWRi
//    MOVi64imm + ADDXrr ==> ADDXri + ADDXri
//
// 3. MOVi32imm + SUBWrr ==> SUBWRi + SUBWRi
//    MOVi64imm + SUBXrr ==> SUBXri + SUBXri
//
//    The mov pseudo instruction could be expanded to multiple mov instructions
//    later. In this case, we could try to split the constant  operand of mov
//    instruction into two immediates which can be directly encoded into
//    *Wri/*Xri instructions. It makes two AND/ADD/SUB instructions instead of
//    multiple `mov` + `and/add/sub` instructions.
//
// 4. Remove redundant ORRWrs which is generated by zero-extend.
//
//    %3:gpr32 = ORRWrs $wzr, %2, 0
//    %4:gpr64 = SUBREG_TO_REG %3, %subreg.sub_32
//
//    If AArch64's 32-bit form of instruction defines the source operand of
//    ORRWrs, we can remove the ORRWrs because the upper 32 bits of the source
//    operand are set to zero.
//
// 5. %reg = INSERT_SUBREG %reg(tied-def 0), %subreg, subidx
//     ==> %reg:subidx =  SUBREG_TO_REG %subreg, subidx
//
// 6. %intermediate:gpr32 = COPY %src:fpr128
//    %dst:fpr128 = INSvi32gpr %dst_vec:fpr128, dst_index, %intermediate:gpr32
//     ==> %dst:fpr128 = INSvi32lane %dst_vec:fpr128, dst_index, %src:fpr128, 0
//
//    In cases where a source FPR is copied to a GPR in order to be copied
//    to a destination FPR, we can directly copy the values between the FPRs,
//    eliminating the use of the Integer unit. When we match a pattern of
//    INSvi[X]gpr that is preceded by a chain of COPY instructions from a FPR
//    source, we use the INSvi[X]lane to replace the COPY & INSvi[X]gpr
//    instructions.
//
// 7. If MI sets zero for high 64-bits implicitly, remove `mov 0` for high
//    64-bits. For example,
//
//   %1:fpr64 = nofpexcept FCVTNv4i16 %0:fpr128, implicit $fpcr
//   %2:fpr64 = MOVID 0
//   %4:fpr128 = IMPLICIT_DEF
//   %3:fpr128 = INSERT_SUBREG %4:fpr128(tied-def 0), %2:fpr64, %subreg.dsub
//   %6:fpr128 = IMPLICIT_DEF
//   %5:fpr128 = INSERT_SUBREG %6:fpr128(tied-def 0), %1:fpr64, %subreg.dsub
//   %7:fpr128 = INSvi64lane %5:fpr128(tied-def 0), 1, %3:fpr128, 0
//   ==>
//   %1:fpr64 = nofpexcept FCVTNv4i16 %0:fpr128, implicit $fpcr
//   %6:fpr128 = IMPLICIT_DEF
//   %7:fpr128 = INSERT_SUBREG %6:fpr128(tied-def 0), %1:fpr64, %subreg.dsub
//
// 8. Remove redundant CSELs that select between identical registers, by
//    replacing them with unconditional moves.
//
// 9. Replace UBFMXri with UBFMWri if the instruction is equivalent to a 32 bit
//    LSR or LSL alias of UBFM.
//
//===----------------------------------------------------------------------===//

#include "AArch64ExpandImm.h"
#include "AArch64InstrInfo.h"
#include "MCTargetDesc/AArch64AddressingModes.h"
#include "llvm/CodeGen/MachineDominators.h"
#include "llvm/CodeGen/MachineLoopInfo.h"

using namespace llvm;

#define DEBUG_TYPE "aarch64-mi-peephole-opt"

namespace {

class AArch64MIPeepholeOptImpl {
public:
  const AArch64InstrInfo *TII;
  const AArch64RegisterInfo *TRI;
  MachineLoopInfo *MLI;
  MachineRegisterInfo *MRI;

  explicit AArch64MIPeepholeOptImpl(MachineLoopInfo &MLI) : MLI(&MLI) {}

  bool run(MachineFunction &MF);

private:
  using OpcodePair = std::pair<unsigned, unsigned>;
  template <typename T>
  using SplitAndOpcFunc =
      std::function<std::optional<OpcodePair>(T, unsigned, T &, T &)>;
  using BuildMIFunc =
      std::function<void(MachineInstr &, OpcodePair, unsigned, unsigned,
                         Register, Register, Register)>;

  /// For instructions where an immediate operand could be split into two
  /// separate immediate instructions, use the splitTwoPartImm two handle the
  /// optimization.
  ///
  /// To implement, the following function types must be passed to
  /// splitTwoPartImm. A SplitAndOpcFunc must be implemented that determines if
  /// splitting the immediate is valid and returns the associated new opcode. A
  /// BuildMIFunc must be implemented to build the two immediate instructions.
  ///
  /// Example Pattern (where IMM would require 2+ MOV instructions):
  ///     %dst = <Instr>rr %src IMM [...]
  /// becomes:
  ///     %tmp = <Instr>ri %src (encode half IMM) [...]
  ///     %dst = <Instr>ri %tmp (encode half IMM) [...]
  template <typename T>
  bool splitTwoPartImm(MachineInstr &MI,
                       SplitAndOpcFunc<T> SplitAndOpc, BuildMIFunc BuildInstr);

  bool checkMovImmInstr(MachineInstr &MI, MachineInstr *&MovMI,
                        MachineInstr *&SubregToRegMI);

  template <typename T>
  bool visitADDSUB(unsigned PosOpc, unsigned NegOpc, MachineInstr &MI);
  template <typename T>
  bool visitADDSSUBS(OpcodePair PosOpcs, OpcodePair NegOpcs, MachineInstr &MI);

  // Strategy used to split logical immediate bitmasks.
  enum class SplitStrategy {
    Intersect,
    Disjoint,
  };
  template <typename T>
  bool trySplitLogicalImm(unsigned Opc, MachineInstr &MI,
                          SplitStrategy Strategy, unsigned OtherOpc = 0);
  bool visitORR(MachineInstr &MI);
  bool visitCSEL(MachineInstr &MI);
  bool visitINSERT(MachineInstr &MI);
  bool visitINSviGPR(MachineInstr &MI, unsigned Opc);
  bool visitINSvi64lane(MachineInstr &MI);
  bool visitFMOVDr(MachineInstr &MI);
  bool visitUBFMXri(MachineInstr &MI);
  bool visitCopy(MachineInstr &MI);
};

struct AArch64MIPeepholeOptLegacy : public MachineFunctionPass {
  static char ID;

  AArch64MIPeepholeOptLegacy() : MachineFunctionPass(ID) {}

  bool runOnMachineFunction(MachineFunction &MF) override;

  StringRef getPassName() const override {
    return "AArch64 MI Peephole Optimization pass";
  }

  void getAnalysisUsage(AnalysisUsage &AU) const override {
    AU.setPreservesCFG();
    AU.addRequired<MachineLoopInfoWrapperPass>();
    MachineFunctionPass::getAnalysisUsage(AU);
  }
};

char AArch64MIPeepholeOptLegacy::ID = 0;

} // end anonymous namespace

INITIALIZE_PASS(AArch64MIPeepholeOptLegacy, "aarch64-mi-peephole-opt",
                "AArch64 MI Peephole Optimization", false, false)

template <typename T>
static bool splitBitmaskImm(T Imm, unsigned RegSize, T &Imm1Enc, T &Imm2Enc) {
  T UImm = static_cast<T>(Imm);
  assert(UImm && (UImm != ~static_cast<T>(0)) && "Invalid immediate!");

  // The bitmask immediate consists of consecutive ones.  Let's say there is
  // constant 0b00000000001000000000010000000000 which does not consist of
  // consecutive ones. We can split it in to two bitmask immediate like
  // 0b00000000001111111111110000000000 and 0b11111111111000000000011111111111.
  // If we do AND with these two bitmask immediate, we can see original one.
  unsigned LowestBitSet = llvm::countr_zero(UImm);
  unsigned HighestBitSet = Log2_64(UImm);

  // Create a mask which is filled with one from the position of lowest bit set
  // to the position of highest bit set.
  T NewImm1 = (static_cast<T>(2) << HighestBitSet) -
              (static_cast<T>(1) << LowestBitSet);
  // Create a mask which is filled with one outside the position of lowest bit
  // set and the position of highest bit set.
  T NewImm2 = UImm | ~NewImm1;

  // If the split value is not valid bitmask immediate, do not split this
  // constant.
  if (!AArch64_AM::isLogicalImmediate(NewImm2, RegSize))
    return false;

  Imm1Enc = AArch64_AM::encodeLogicalImmediate(NewImm1, RegSize);
  Imm2Enc = AArch64_AM::encodeLogicalImmediate(NewImm2, RegSize);
  return true;
}

template <typename T>
static bool splitDisjointBitmaskImm(T Imm, unsigned RegSize, T &Imm1Enc,
                                    T &Imm2Enc) {
  assert(Imm && (Imm != ~static_cast<T>(0)) && "Invalid immediate!");

  // Try to split a bitmask of the form 0b00000000011000000000011110000000 into
  // two disjoint masks such as 0b00000000011000000000000000000000 and
  // 0b00000000000000000000011110000000 where the inclusive/exclusive OR of the
  // new masks match the original mask.
  unsigned LowestBitSet = llvm::countr_zero(Imm);
  unsigned LowestGapBitUnset =
      LowestBitSet + llvm::countr_one(Imm >> LowestBitSet);

  // Create a mask for the least significant group of consecutive ones.
  assert(LowestGapBitUnset < sizeof(T) * CHAR_BIT && "Undefined behaviour!");
  T NewImm1 = (static_cast<T>(1) << LowestGapBitUnset) -
              (static_cast<T>(1) << LowestBitSet);
  // Create a disjoint mask for the remaining ones.
  T NewImm2 = Imm & ~NewImm1;

  // Do not split if NewImm2 is not a valid bitmask immediate.
  if (!AArch64_AM::isLogicalImmediate(NewImm2, RegSize))
    return false;

  Imm1Enc = AArch64_AM::encodeLogicalImmediate(NewImm1, RegSize);
  Imm2Enc = AArch64_AM::encodeLogicalImmediate(NewImm2, RegSize);
  return true;
}

template <typename T>
bool AArch64MIPeepholeOptImpl::trySplitLogicalImm(unsigned Opc,
                                                  MachineInstr &MI,
                                                  SplitStrategy Strategy,
                                                  unsigned OtherOpc) {
  // Try below transformations.
  //
  // MOVi32imm + (ANDS?|EOR|ORR)Wrr ==> (AND|EOR|ORR)Wri + (ANDS?|EOR|ORR)Wri
  // MOVi64imm + (ANDS?|EOR|ORR)Xrr ==> (AND|EOR|ORR)Xri + (ANDS?|EOR|ORR)Xri
  //
  // The mov pseudo instruction could be expanded to multiple mov instructions
  // later. Let's try to split the constant operand of mov instruction into two
  // bitmask immediates based on the given split strategy. It makes only two
  // logical instructions instead of multiple mov + logic instructions.

  return splitTwoPartImm<T>(
      MI,
      [Opc, Strategy, OtherOpc](T Imm, unsigned RegSize, T &Imm0,
                                T &Imm1) -> std::optional<OpcodePair> {
        // If this immediate is already a suitable bitmask, don't split it.
        // TODO: Should we just combine the two instructions in this case?
        if (AArch64_AM::isLogicalImmediate(Imm, RegSize))
          return std::nullopt;

        // If this immediate can be handled by one instruction, don't split it.
        SmallVector<AArch64_IMM::ImmInsnModel, 4> Insn;
        AArch64_IMM::expandMOVImm(Imm, RegSize, Insn);
        if (Insn.size() == 1)
          return std::nullopt;

        bool SplitSucc = false;
        switch (Strategy) {
        case SplitStrategy::Intersect:
          SplitSucc = splitBitmaskImm(Imm, RegSize, Imm0, Imm1);
          break;
        case SplitStrategy::Disjoint:
          SplitSucc = splitDisjointBitmaskImm(Imm, RegSize, Imm0, Imm1);
          break;
        }
        if (SplitSucc)
          return std::make_pair(Opc, !OtherOpc ? Opc : OtherOpc);
        return std::nullopt;
      },
      [&TII = TII](MachineInstr &MI, OpcodePair Opcode, unsigned Imm0,
                   unsigned Imm1, Register SrcReg, Register NewTmpReg,
                   Register NewDstReg) {
        DebugLoc DL = MI.getDebugLoc();
        MachineBasicBlock *MBB = MI.getParent();
        BuildMI(*MBB, MI, DL, TII->get(Opcode.first), NewTmpReg)
            .addReg(SrcReg)
            .addImm(Imm0);
        BuildMI(*MBB, MI, DL, TII->get(Opcode.second), NewDstReg)
            .addReg(NewTmpReg)
            .addImm(Imm1);
      });
}

bool AArch64MIPeepholeOptImpl::visitORR(MachineInstr &MI) {
  // Check this ORR comes from below zero-extend pattern.
  //
  // def : Pat<(i64 (zext GPR32:$src)),
  //           (SUBREG_TO_REG (ORRWrs WZR, GPR32:$src, 0), sub_32)>;
  if (MI.getOperand(3).getImm() != 0)
    return false;

  if (MI.getOperand(1).getReg() != AArch64::WZR)
    return false;

  if (MI.getOperand(2).getSubReg())
    return false;

  MachineInstr *SrcMI = MRI->getUniqueVRegDef(MI.getOperand(2).getReg());
  if (!SrcMI)
    return false;

  // From https://developer.arm.com/documentation/dui0801/b/BABBGCAC
  //
  // When you use the 32-bit form of an instruction, the upper 32 bits of the
  // source registers are ignored and the upper 32 bits of the destination
  // register are set to zero.
  //
  // If AArch64's 32-bit form of instruction defines the source operand of
  // zero-extend, we do not need the zero-extend. Let's check the MI's opcode is
  // real AArch64 instruction and if it is not, do not process the opcode
  // conservatively.
  if (SrcMI->getOpcode() == TargetOpcode::COPY &&
      SrcMI->getOperand(1).getReg().isVirtual()) {
    const TargetRegisterClass *RC =
        MRI->getRegClass(SrcMI->getOperand(1).getReg());

    // A COPY from an FPR will become a FMOVSWr, so do so now so that we know
    // that the upper bits are zero.
    if (RC != &AArch64::FPR32RegClass &&
        ((RC != &AArch64::FPR64RegClass && RC != &AArch64::FPR128RegClass &&
          RC != &AArch64::ZPRRegClass) ||
         SrcMI->getOperand(1).getSubReg() != AArch64::ssub))
      return false;
    Register CpySrc;
    if (SrcMI->getOperand(1).getSubReg() == AArch64::ssub) {
      CpySrc = MRI->createVirtualRegister(&AArch64::FPR32RegClass);
      BuildMI(*SrcMI->getParent(), SrcMI, SrcMI->getDebugLoc(),
              TII->get(TargetOpcode::COPY), CpySrc)
          .add(SrcMI->getOperand(1));
    } else {
      CpySrc = SrcMI->getOperand(1).getReg();
    }
    BuildMI(*SrcMI->getParent(), SrcMI, SrcMI->getDebugLoc(),
            TII->get(AArch64::FMOVSWr), SrcMI->getOperand(0).getReg())
        .addReg(CpySrc);
    SrcMI->eraseFromParent();
  }
  else if (SrcMI->getOpcode() <= TargetOpcode::GENERIC_OP_END)
    return false;

  Register DefReg = MI.getOperand(0).getReg();
  Register SrcReg = MI.getOperand(2).getReg();
  MRI->replaceRegWith(DefReg, SrcReg);
  MRI->clearKillFlags(SrcReg);
  LLVM_DEBUG(dbgs() << "Removed: " << MI << "\n");
  MI.eraseFromParent();

  return true;
}

bool AArch64MIPeepholeOptImpl::visitCSEL(MachineInstr &MI) {
  // Replace CSEL with MOV when both inputs are the same register.
  if (MI.getOperand(1).getReg() != MI.getOperand(2).getReg())
    return false;

  auto ZeroReg =
      MI.getOpcode() == AArch64::CSELXr ? AArch64::XZR : AArch64::WZR;
  auto OrOpcode =
      MI.getOpcode() == AArch64::CSELXr ? AArch64::ORRXrs : AArch64::ORRWrs;

  BuildMI(*MI.getParent(), MI, MI.getDebugLoc(), TII->get(OrOpcode))
      .addReg(MI.getOperand(0).getReg(), RegState::Define)
      .addReg(ZeroReg)
      .addReg(MI.getOperand(1).getReg())
      .addImm(0);

  MI.eraseFromParent();
  return true;
}

bool AArch64MIPeepholeOptImpl::visitINSERT(MachineInstr &MI) {
  // Check this INSERT_SUBREG comes from below zero-extend pattern.
  //
  // From %reg = INSERT_SUBREG %reg(tied-def 0), %subreg, subidx
  // To   %reg:subidx = SUBREG_TO_REG %subreg, subidx
  //
  // We're assuming the first operand to INSERT_SUBREG is irrelevant because a
  // COPY would destroy the upper part of the register anyway
  if (!MI.isRegTiedToDefOperand(1))
    return false;

  Register DstReg = MI.getOperand(0).getReg();
  const TargetRegisterClass *RC = MRI->getRegClass(DstReg);
  MachineInstr *SrcMI = MRI->getUniqueVRegDef(MI.getOperand(2).getReg());
  if (!SrcMI)
    return false;

  // From https://developer.arm.com/documentation/dui0801/b/BABBGCAC
  //
  // When you use the 32-bit form of an instruction, the upper 32 bits of the
  // source registers are ignored and the upper 32 bits of the destination
  // register are set to zero.
  //
  // If AArch64's 32-bit form of instruction defines the source operand of
  // zero-extend, we do not need the zero-extend. Let's check the MI's opcode is
  // real AArch64 instruction and if it is not, do not process the opcode
  // conservatively.
  if ((SrcMI->getOpcode() <= TargetOpcode::GENERIC_OP_END) ||
      !AArch64::GPR64allRegClass.hasSubClassEq(RC))
    return false;

  // Build a SUBREG_TO_REG instruction
  MachineInstr *SubregMI =
      BuildMI(*MI.getParent(), MI, MI.getDebugLoc(),
              TII->get(TargetOpcode::SUBREG_TO_REG), DstReg)
          .add(MI.getOperand(2))
          .add(MI.getOperand(3));
  LLVM_DEBUG(dbgs() << MI << "  replace by:\n: " << *SubregMI << "\n");
  (void)SubregMI;
  MI.eraseFromParent();

  return true;
}

template <typename T>
static bool splitAddSubImm(T Imm, unsigned RegSize, T &Imm0, T &Imm1) {
  // The immediate must be in the form of ((imm0 << 12) + imm1), in which both
  // imm0 and imm1 are non-zero 12-bit unsigned int.
  if ((Imm & 0xfff000) == 0 || (Imm & 0xfff) == 0 ||
      (Imm & ~static_cast<T>(0xffffff)) != 0)
    return false;

  // The immediate can not be composed via a single instruction.
  SmallVector<AArch64_IMM::ImmInsnModel, 4> Insn;
  AArch64_IMM::expandMOVImm(Imm, RegSize, Insn);
  if (Insn.size() == 1)
    return false;

  // Split Imm into (Imm0 << 12) + Imm1;
  Imm0 = (Imm >> 12) & 0xfff;
  Imm1 = Imm & 0xfff;
  return true;
}

template <typename T>
bool AArch64MIPeepholeOptImpl::visitADDSUB(unsigned PosOpc, unsigned NegOpc,
                                           MachineInstr &MI) {
  // Try below transformation.
  //
  // ADDWrr X, MOVi32imm ==> ADDWri + ADDWri
  // ADDXrr X, MOVi64imm ==> ADDXri + ADDXri
  //
  // SUBWrr X, MOVi32imm ==> SUBWri + SUBWri
  // SUBXrr X, MOVi64imm ==> SUBXri + SUBXri
  //
  // The mov pseudo instruction could be expanded to multiple mov instructions
  // later. Let's try to split the constant operand of mov instruction into two
  // legal add/sub immediates. It makes only two ADD/SUB instructions instead of
  // multiple `mov` + `and/sub` instructions.

  // We can sometimes have ADDWrr WZR, MULi32imm that have not been constant
  // folded. Make sure that we don't generate invalid instructions that use XZR
  // in those cases.
  if (MI.getOperand(1).getReg() == AArch64::XZR ||
      MI.getOperand(1).getReg() == AArch64::WZR)
    return false;

  return splitTwoPartImm<T>(
      MI,
      [PosOpc, NegOpc](T Imm, unsigned RegSize, T &Imm0,
                       T &Imm1) -> std::optional<OpcodePair> {
        if (splitAddSubImm(Imm, RegSize, Imm0, Imm1))
          return std::make_pair(PosOpc, PosOpc);
        if (splitAddSubImm(-Imm, RegSize, Imm0, Imm1))
          return std::make_pair(NegOpc, NegOpc);
        return std::nullopt;
      },
      [&TII = TII](MachineInstr &MI, OpcodePair Opcode, unsigned Imm0,
                   unsigned Imm1, Register SrcReg, Register NewTmpReg,
                   Register NewDstReg) {
        DebugLoc DL = MI.getDebugLoc();
        MachineBasicBlock *MBB = MI.getParent();
        BuildMI(*MBB, MI, DL, TII->get(Opcode.first), NewTmpReg)
            .addReg(SrcReg)
            .addImm(Imm0)
            .addImm(12);
        BuildMI(*MBB, MI, DL, TII->get(Opcode.second), NewDstReg)
            .addReg(NewTmpReg)
            .addImm(Imm1)
            .addImm(0);
      });
}

template <typename T>
bool AArch64MIPeepholeOptImpl::visitADDSSUBS(OpcodePair PosOpcs,
                                             OpcodePair NegOpcs,
                                             MachineInstr &MI) {
  // Try the same transformation as ADDSUB but with additional requirement
  // that the condition code usages are only for Equal and Not Equal

  if (MI.getOperand(1).getReg() == AArch64::XZR ||
      MI.getOperand(1).getReg() == AArch64::WZR)
    return false;

  return splitTwoPartImm<T>(
      MI,
      [PosOpcs, NegOpcs, &MI, &TRI = TRI,
       &MRI = MRI](T Imm, unsigned RegSize, T &Imm0,
                   T &Imm1) -> std::optional<OpcodePair> {
        OpcodePair OP;
        if (splitAddSubImm(Imm, RegSize, Imm0, Imm1))
          OP = PosOpcs;
        else if (splitAddSubImm(-Imm, RegSize, Imm0, Imm1))
          OP = NegOpcs;
        else
          return std::nullopt;
        // Check conditional uses last since it is expensive for scanning
        // proceeding instructions
        MachineInstr *SrcMI = MRI->getVRegDef(MI.getOperand(1).getReg());
        if (!SrcMI)
          return std::nullopt;
        std::optional<UsedNZCV> NZCVUsed = examineCFlagsUse(*SrcMI, MI, *TRI);
        if (!NZCVUsed || NZCVUsed->C || NZCVUsed->V)
          return std::nullopt;
        return OP;
      },
      [&TII = TII](MachineInstr &MI, OpcodePair Opcode, unsigned Imm0,
                   unsigned Imm1, Register SrcReg, Register NewTmpReg,
                   Register NewDstReg) {
        DebugLoc DL = MI.getDebugLoc();
        MachineBasicBlock *MBB = MI.getParent();
        BuildMI(*MBB, MI, DL, TII->get(Opcode.first), NewTmpReg)
            .addReg(SrcReg)
            .addImm(Imm0)
            .addImm(12);
        BuildMI(*MBB, MI, DL, TII->get(Opcode.second), NewDstReg)
            .addReg(NewTmpReg)
            .addImm(Imm1)
            .addImm(0);
      });
}

// Checks if the corresponding MOV immediate instruction is applicable for
// this peephole optimization.
bool AArch64MIPeepholeOptImpl::checkMovImmInstr(MachineInstr &MI,
                                                MachineInstr *&MovMI,
                                                MachineInstr *&SubregToRegMI) {
  // Check whether current MBB is in loop and the AND is loop invariant.
  MachineBasicBlock *MBB = MI.getParent();
  MachineLoop *L = MLI->getLoopFor(MBB);
  if (L && !L->isLoopInvariant(MI))
    return false;

  // Check whether current MI's operand is MOV with immediate.
  MovMI = MRI->getUniqueVRegDef(MI.getOperand(2).getReg());
  if (!MovMI)
    return false;

  // If it is SUBREG_TO_REG, check its operand.
  SubregToRegMI = nullptr;
  if (MovMI->getOpcode() == TargetOpcode::SUBREG_TO_REG) {
    SubregToRegMI = MovMI;
    MovMI = MRI->getUniqueVRegDef(MovMI->getOperand(1).getReg());
    if (!MovMI)
      return false;
  }

  if (MovMI->getOpcode() != AArch64::MOVi32imm &&
      MovMI->getOpcode() != AArch64::MOVi64imm)
    return false;

  // If the MOV has multiple uses, do not split the immediate because it causes
  // more instructions.
  if (!MRI->hasOneNonDBGUse(MovMI->getOperand(0).getReg()))
    return false;
  if (SubregToRegMI &&
      !MRI->hasOneNonDBGUse(SubregToRegMI->getOperand(0).getReg()))
    return false;

  // It is OK to perform this peephole optimization.
  return true;
}

template <typename T>
bool AArch64MIPeepholeOptImpl::splitTwoPartImm(MachineInstr &MI,
                                               SplitAndOpcFunc<T> SplitAndOpc,
                                               BuildMIFunc BuildInstr) {
  unsigned RegSize = sizeof(T) * 8;
  assert((RegSize == 32 || RegSize == 64) &&
         "Invalid RegSize for legal immediate peephole optimization");

  // Perform several essential checks against current MI.
  MachineInstr *MovMI, *SubregToRegMI;
  if (!checkMovImmInstr(MI, MovMI, SubregToRegMI))
    return false;

  // Split the immediate to Imm0 and Imm1, and calculate the Opcode.
  T Imm = static_cast<T>(MovMI->getOperand(1).getImm()), Imm0, Imm1;
  // For the 32 bit form of instruction, the upper 32 bits of the destination
  // register are set to zero. If there is SUBREG_TO_REG, set the upper 32 bits
  // of Imm to zero. This is essential if the Immediate value was a negative
  // number since it was sign extended when we assign to the 64-bit Imm.
  if (SubregToRegMI)
    Imm &= 0xFFFFFFFF;
  OpcodePair Opcode;
  if (auto R = SplitAndOpc(Imm, RegSize, Imm0, Imm1))
    Opcode = *R;
  else
    return false;

  // Create new MIs using the first and second opcodes. Opcodes might differ for
  // flag setting operations that should only set flags on second instruction.
  // NewTmpReg = Opcode.first SrcReg Imm0
  // NewDstReg = Opcode.second NewTmpReg Imm1

  // Determine register classes for destinations and register operands
  const TargetRegisterClass *FirstInstrDstRC =
      TII->getRegClass(TII->get(Opcode.first), 0);
  const TargetRegisterClass *FirstInstrOperandRC =
      TII->getRegClass(TII->get(Opcode.first), 1);
  const TargetRegisterClass *SecondInstrDstRC =
      (Opcode.first == Opcode.second)
          ? FirstInstrDstRC
          : TII->getRegClass(TII->get(Opcode.second), 0);
  const TargetRegisterClass *SecondInstrOperandRC =
      (Opcode.first == Opcode.second)
          ? FirstInstrOperandRC
          : TII->getRegClass(TII->get(Opcode.second), 1);

  // Get old registers destinations and new register destinations
  Register DstReg = MI.getOperand(0).getReg();
  Register SrcReg = MI.getOperand(1).getReg();
  Register NewTmpReg = MRI->createVirtualRegister(FirstInstrDstRC);
  // In the situation that DstReg is not Virtual (likely WZR or XZR), we want to
  // reuse that same destination register.
  Register NewDstReg = DstReg.isVirtual()
                           ? MRI->createVirtualRegister(SecondInstrDstRC)
                           : DstReg;

  // Constrain registers based on their new uses
  MRI->constrainRegClass(SrcReg, FirstInstrOperandRC);
  MRI->constrainRegClass(NewTmpReg, SecondInstrOperandRC);
  if (DstReg != NewDstReg)
    MRI->constrainRegClass(NewDstReg, MRI->getRegClass(DstReg));

  // Call the delegating operation to build the instruction
  BuildInstr(MI, Opcode, Imm0, Imm1, SrcReg, NewTmpReg, NewDstReg);

  // replaceRegWith changes MI's definition register. Keep it for SSA form until
  // deleting MI. Only if we made a new destination register.
  if (DstReg != NewDstReg) {
    MRI->replaceRegWith(DstReg, NewDstReg);
    MI.getOperand(0).setReg(DstReg);
  }

  auto SalvageDebugUses = [&](Register Reg, int64_t Val) {
    for (MachineOperand &MO : make_early_inc_range(MRI->use_operands(Reg))) {
      MachineInstr &DbgMI = *MO.getParent();
      if (!DbgMI.isDebugValue())
        continue;
      // An immediate cannot express a value in memory at that address.
      if (DbgMI.isNonListDebugValue() && DbgMI.isIndirectDebugValue())
        DbgMI.setDebugValueUndef();
      else
        MO.ChangeToImmediate(Val);
    }
  };

  // Record the MIs need to be removed.
  MI.eraseFromParent();
  if (SubregToRegMI) {
    SalvageDebugUses(SubregToRegMI->getOperand(0).getReg(), Imm);
    SubregToRegMI->eraseFromParent();
  }
  SalvageDebugUses(MovMI->getOperand(0).getReg(),
                   MovMI->getOperand(1).getImm());
  MovMI->eraseFromParent();

  return true;
}

bool AArch64MIPeepholeOptImpl::visitINSviGPR(MachineInstr &MI, unsigned Opc) {
  // Check if this INSvi[X]gpr comes from COPY of a source FPR128
  //
  // From
  //  %intermediate1:gpr64 = COPY %src:fpr128
  //  %intermediate2:gpr32 = COPY %intermediate1:gpr64
  //  %dst:fpr128 = INSvi[X]gpr %dst_vec:fpr128, dst_index, %intermediate2:gpr32
  // To
  //  %dst:fpr128 = INSvi[X]lane %dst_vec:fpr128, dst_index, %src:fpr128,
  //  src_index
  // where src_index = 0, X = [8|16|32|64]

  MachineInstr *SrcMI = MRI->getUniqueVRegDef(MI.getOperand(3).getReg());

  // For a chain of COPY instructions, find the initial source register
  // and check if it's an FPR128
  while (true) {
    if (!SrcMI || SrcMI->getOpcode() != TargetOpcode::COPY)
      return false;

    if (!SrcMI->getOperand(1).getReg().isVirtual())
      return false;

    if (MRI->getRegClass(SrcMI->getOperand(1).getReg()) ==
        &AArch64::FPR128RegClass) {
      break;
    }
    SrcMI = MRI->getUniqueVRegDef(SrcMI->getOperand(1).getReg());
  }

  Register DstReg = MI.getOperand(0).getReg();
  Register SrcReg = SrcMI->getOperand(1).getReg();
  MachineInstr *INSvilaneMI =
      BuildMI(*MI.getParent(), MI, MI.getDebugLoc(), TII->get(Opc), DstReg)
          .add(MI.getOperand(1))
          .add(MI.getOperand(2))
          .addUse(SrcReg, getRegState(SrcMI->getOperand(1)))
          .addImm(0);

  LLVM_DEBUG(dbgs() << MI << "  replace by:\n: " << *INSvilaneMI << "\n");
  (void)INSvilaneMI;
  MI.eraseFromParent();
  return true;
}

// All instructions that set a FPR64 will implicitly zero the top bits of the
// register. When the def is expressed as a COPY from a GPR, turn it into an
// explicit FMOV so it cannot be elided later in further passes.
static bool is64bitDefwithZeroHigh64bit(MachineInstr *MI,
                                        MachineRegisterInfo *MRI,
                                        const AArch64InstrInfo *TII) {
  if (!MI->getOperand(0).isReg() || !MI->getOperand(0).isDef())
    return false;
  const TargetRegisterClass *RC = MRI->getRegClass(MI->getOperand(0).getReg());
  if (RC != &AArch64::FPR64RegClass)
    return false;
  if (MI->getOpcode() == TargetOpcode::COPY) {
    MachineOperand &SrcOp = MI->getOperand(1);
    if (!SrcOp.isReg())
      return false;
    Register SrcReg = SrcOp.getReg();
    if (SrcOp.getSubReg()) {
      // If operand is defined by a LD1/2/3/4 that define a D subreg tuple
      // then upper bits of the tuple's registers are implicitly zeroed
      // and the FMOV is unneeded.
      if (!SrcReg.isVirtual())
        return false;

      MachineInstr *SrcDef = MRI->getUniqueVRegDef(SrcReg);
      if (!SrcDef || SrcDef->getOpcode() <= TargetOpcode::GENERIC_OP_END ||
          SrcDef->getDesc().isPseudo() || !SrcDef->mayLoad())
        return false;

      const TargetRegisterClass *RC = MRI->getRegClass(SrcReg);
      return RC == &AArch64::DDRegClass || RC == &AArch64::DDDRegClass ||
             RC == &AArch64::DDDDRegClass;
    }
    auto IsGPR64Like = [&]() -> bool {
      if (SrcReg.isVirtual())
        return AArch64::GPR64allRegClass.hasSubClassEq(
            MRI->getRegClass(SrcReg));
      return AArch64::GPR64allRegClass.contains(SrcReg);
    };
    if (!IsGPR64Like())
      return false;
    assert(TII && "Expected InstrInfo when materializing COPYs");
    // FMOVXDr insists on strict GPR64 operands, so fix up the COPY source.
    MachineOperand &SrcMO = MI->getOperand(1);
    bool SrcKill = SrcMO.isKill();
    if (SrcReg.isVirtual()) {
      if (MRI->getRegClass(SrcReg) != &AArch64::GPR64RegClass) {
        // Pass the value through a temporary GPR64 vreg to satisfy the
        // verifier.
        Register NewSrc = MRI->createVirtualRegister(&AArch64::GPR64RegClass);
        BuildMI(*MI->getParent(), MI, MI->getDebugLoc(),
                TII->get(TargetOpcode::COPY), NewSrc)
            .addReg(SrcReg, getKillRegState(SrcKill));
        SrcReg = NewSrc;
        SrcKill = true;
      }
    } else if (!AArch64::GPR64RegClass.contains(SrcReg)) {
      return false;
    }
    SrcMO.setReg(SrcReg);
    SrcMO.setSubReg(0);
    SrcMO.setIsKill(SrcKill);
    // Replace the COPY with an explicit FMOV so the zeroing behaviour stays
    // visible.
    MI->setDesc(TII->get(AArch64::FMOVXDr));
    return true;
  }
  return MI->getOpcode() > TargetOpcode::GENERIC_OP_END;
}

bool AArch64MIPeepholeOptImpl::visitINSvi64lane(MachineInstr &MI) {
  // Check the MI for low 64-bits sets zero for high 64-bits implicitly.
  // We are expecting below case.
  //
  //  %1:fpr64 = nofpexcept FCVTNv4i16 %0:fpr128, implicit $fpcr
  //  %6:fpr128 = IMPLICIT_DEF
  //  %5:fpr128 = INSERT_SUBREG %6:fpr128(tied-def 0), killed %1:fpr64, %subreg.dsub
  //  %7:fpr128 = INSvi64lane %5:fpr128(tied-def 0), 1, killed %3:fpr128, 0
  MachineInstr *Low64MI = MRI->getVRegDef(MI.getOperand(1).getReg());
  if (!Low64MI || Low64MI->getOpcode() != AArch64::INSERT_SUBREG)
    return false;
  Low64MI = MRI->getUniqueVRegDef(Low64MI->getOperand(2).getReg());
  if (!Low64MI || !is64bitDefwithZeroHigh64bit(Low64MI, MRI, TII))
    return false;

  // Check there is `mov 0` MI for high 64-bits.
  // We are expecting below cases.
  //
  //  %2:fpr64 = MOVID 0
  //  %4:fpr128 = IMPLICIT_DEF
  //  %3:fpr128 = INSERT_SUBREG %4:fpr128(tied-def 0), killed %2:fpr64, %subreg.dsub
  //  %7:fpr128 = INSvi64lane %5:fpr128(tied-def 0), 1, killed %3:fpr128, 0
  // or
  //  %5:fpr128 = MOVIv2d_ns 0
  //  %6:fpr64 = COPY %5.dsub:fpr128
  //  %8:fpr128 = IMPLICIT_DEF
  //  %7:fpr128 = INSERT_SUBREG %8:fpr128(tied-def 0), killed %6:fpr64, %subreg.dsub
  //  %11:fpr128 = INSvi64lane %9:fpr128(tied-def 0), 1, killed %7:fpr128, 0
  MachineInstr *High64MI = MRI->getUniqueVRegDef(MI.getOperand(3).getReg());
  if (!High64MI || High64MI->getOpcode() != AArch64::INSERT_SUBREG)
    return false;
  High64MI = MRI->getUniqueVRegDef(High64MI->getOperand(2).getReg());
  if (High64MI && High64MI->getOpcode() == TargetOpcode::COPY)
    High64MI = MRI->getUniqueVRegDef(High64MI->getOperand(1).getReg());
  if (!High64MI || (High64MI->getOpcode() != AArch64::MOVID &&
                    High64MI->getOpcode() != AArch64::MOVIv2d_ns))
    return false;
  if (High64MI->getOperand(1).getImm() != 0)
    return false;

  // Let's remove MIs for high 64-bits.
  Register OldDef = MI.getOperand(0).getReg();
  Register NewDef = MI.getOperand(1).getReg();
  LLVM_DEBUG(dbgs() << "Removing: " << MI << "\n");
  MRI->constrainRegClass(NewDef, MRI->getRegClass(OldDef));
  MRI->replaceRegWith(OldDef, NewDef);
  MRI->clearKillFlags(NewDef);
  MI.eraseFromParent();

  return true;
}

bool AArch64MIPeepholeOptImpl::visitFMOVDr(MachineInstr &MI) {
  // An FMOVDr sets the high 64-bits to zero implicitly, similar to ORR for GPR.
  MachineInstr *Low64MI = MRI->getUniqueVRegDef(MI.getOperand(1).getReg());
  if (!Low64MI || !is64bitDefwithZeroHigh64bit(Low64MI, MRI, TII))
    return false;

  // Let's remove MIs for high 64-bits.
  Register OldDef = MI.getOperand(0).getReg();
  Register NewDef = MI.getOperand(1).getReg();
  LLVM_DEBUG(dbgs() << "Removing: " << MI << "\n");
  MRI->clearKillFlags(OldDef);
  MRI->clearKillFlags(NewDef);
  MRI->constrainRegClass(NewDef, MRI->getRegClass(OldDef));
  MRI->replaceRegWith(OldDef, NewDef);
  MI.eraseFromParent();

  return true;
}

bool AArch64MIPeepholeOptImpl::visitUBFMXri(MachineInstr &MI) {
  // Check if the instruction is equivalent to a 32 bit LSR or LSL alias of
  // UBFM, and replace the UBFMXri instruction with its 32 bit variant, UBFMWri.
  int64_t Immr = MI.getOperand(2).getImm();
  int64_t Imms = MI.getOperand(3).getImm();

  bool IsLSR = Imms == 31 && Immr <= Imms;
  bool IsLSL = Immr == Imms + 33;
  if (!IsLSR && !IsLSL)
    return false;

  if (IsLSL) {
    Immr -= 32;
  }

  const TargetRegisterClass *DstRC64 =
      TII->getRegClass(TII->get(MI.getOpcode()), 0);
  const TargetRegisterClass *DstRC32 =
      TRI->getSubRegisterClass(DstRC64, AArch64::sub_32);
  assert(DstRC32 && "Destination register class of UBFMXri doesn't have a "
                    "sub_32 subregister class");

  const TargetRegisterClass *SrcRC64 =
      TII->getRegClass(TII->get(MI.getOpcode()), 1);
  const TargetRegisterClass *SrcRC32 =
      TRI->getSubRegisterClass(SrcRC64, AArch64::sub_32);
  assert(SrcRC32 && "Source register class of UBFMXri doesn't have a sub_32 "
                    "subregister class");

  Register DstReg64 = MI.getOperand(0).getReg();
  Register DstReg32 = MRI->createVirtualRegister(DstRC32);
  Register SrcReg64 = MI.getOperand(1).getReg();
  Register SrcReg32 = MRI->createVirtualRegister(SrcRC32);

  BuildMI(*MI.getParent(), MI, MI.getDebugLoc(), TII->get(AArch64::COPY),
          SrcReg32)
      .addReg(SrcReg64, {}, AArch64::sub_32);
  BuildMI(*MI.getParent(), MI, MI.getDebugLoc(), TII->get(AArch64::UBFMWri),
          DstReg32)
      .addReg(SrcReg32)
      .addImm(Immr)
      .addImm(Imms);
  BuildMI(*MI.getParent(), MI, MI.getDebugLoc(),
          TII->get(AArch64::SUBREG_TO_REG), DstReg64)
      .addReg(DstReg32)
      .addImm(AArch64::sub_32);
  MI.eraseFromParent();
  return true;
}

// Across a basic-block we might have in i32 extract from a value that only
// operates on upper bits (for example a sxtw). We can replace the COPY with a
// new version skipping the sxtw.
bool AArch64MIPeepholeOptImpl::visitCopy(MachineInstr &MI) {
  Register InputReg = MI.getOperand(1).getReg();
  if (MI.getOperand(1).getSubReg() != AArch64::sub_32 ||
      !MRI->hasOneNonDBGUse(InputReg))
    return false;

  MachineInstr *SrcMI = MRI->getUniqueVRegDef(InputReg);
  SmallPtrSet<MachineInstr *, 4> DeadInstrs;
  DeadInstrs.insert(SrcMI);
  while (SrcMI && SrcMI->isFullCopy() &&
         MRI->hasOneNonDBGUse(SrcMI->getOperand(1).getReg())) {
    SrcMI = MRI->getUniqueVRegDef(SrcMI->getOperand(1).getReg());
    DeadInstrs.insert(SrcMI);
  }

  if (!SrcMI)
    return false;

  // Look for SXTW(X) and return Reg.
  auto getSXTWSrcReg = [](MachineInstr *SrcMI) -> Register {
    if (SrcMI->getOpcode() != AArch64::SBFMXri ||
        SrcMI->getOperand(2).getImm() != 0 ||
        SrcMI->getOperand(3).getImm() != 31)
      return Register();
    return SrcMI->getOperand(1).getReg();
  };
  // Look for SUBREG_TO_REG(ORRWrr(WZR, COPY(X.sub_32)))
  auto getUXTWSrcReg = [&](MachineInstr *SrcMI) -> Register {
    if (SrcMI->getOpcode() != AArch64::SUBREG_TO_REG ||
        SrcMI->getOperand(2).getImm() != AArch64::sub_32 ||
        !MRI->hasOneNonDBGUse(SrcMI->getOperand(1).getReg()))
      return Register();
    MachineInstr *Orr = MRI->getUniqueVRegDef(SrcMI->getOperand(1).getReg());
    if (!Orr || Orr->getOpcode() != AArch64::ORRWrr ||
        Orr->getOperand(1).getReg() != AArch64::WZR ||
        !MRI->hasOneNonDBGUse(Orr->getOperand(2).getReg()))
      return Register();
    MachineInstr *Cpy = MRI->getUniqueVRegDef(Orr->getOperand(2).getReg());
    if (!Cpy || Cpy->getOpcode() != AArch64::COPY ||
        Cpy->getOperand(1).getSubReg() != AArch64::sub_32)
      return Register();
    DeadInstrs.insert(Orr);
    return Cpy->getOperand(1).getReg();
  };

  Register SrcReg = getSXTWSrcReg(SrcMI);
  if (!SrcReg)
    SrcReg = getUXTWSrcReg(SrcMI);
  if (!SrcReg)
    return false;

  MRI->constrainRegClass(SrcReg, MRI->getRegClass(InputReg));
  LLVM_DEBUG(dbgs() << "Optimizing: " << MI);
  MI.getOperand(1).setReg(SrcReg);
  LLVM_DEBUG(dbgs() << "        to: " << MI);
  for (auto *DeadMI : DeadInstrs) {
    LLVM_DEBUG(dbgs() << "  Removing: " << *DeadMI);
    DeadMI->eraseFromParent();
  }
  return true;
}

bool AArch64MIPeepholeOptImpl::run(MachineFunction &MF) {
  TII = static_cast<const AArch64InstrInfo *>(MF.getSubtarget().getInstrInfo());
  TRI = static_cast<const AArch64RegisterInfo *>(
      MF.getSubtarget().getRegisterInfo());
  MRI = &MF.getRegInfo();

  assert(MRI->isSSA() && "Expected to be run on SSA form!");

  bool Changed = false;

  for (MachineBasicBlock &MBB : MF) {
    for (MachineInstr &MI : make_early_inc_range(MBB)) {
      switch (MI.getOpcode()) {
      default:
        break;
      case AArch64::INSERT_SUBREG:
        Changed |= visitINSERT(MI);
        break;
      case AArch64::ANDWrr:
        Changed |= trySplitLogicalImm<uint32_t>(AArch64::ANDWri, MI,
                                                SplitStrategy::Intersect);
        break;
      case AArch64::ANDXrr:
        Changed |= trySplitLogicalImm<uint64_t>(AArch64::ANDXri, MI,
                                                SplitStrategy::Intersect);
        break;
      case AArch64::ANDSWrr:
        Changed |= trySplitLogicalImm<uint32_t>(
            AArch64::ANDWri, MI, SplitStrategy::Intersect, AArch64::ANDSWri);
        break;
      case AArch64::ANDSXrr:
        Changed |= trySplitLogicalImm<uint64_t>(
            AArch64::ANDXri, MI, SplitStrategy::Intersect, AArch64::ANDSXri);
        break;
      case AArch64::EORWrr:
        Changed |= trySplitLogicalImm<uint32_t>(AArch64::EORWri, MI,
                                                SplitStrategy::Disjoint);
        break;
      case AArch64::EORXrr:
        Changed |= trySplitLogicalImm<uint64_t>(AArch64::EORXri, MI,
                                                SplitStrategy::Disjoint);
        break;
      case AArch64::ORRWrr:
        Changed |= trySplitLogicalImm<uint32_t>(AArch64::ORRWri, MI,
                                                SplitStrategy::Disjoint);
        break;
      case AArch64::ORRXrr:
        Changed |= trySplitLogicalImm<uint64_t>(AArch64::ORRXri, MI,
                                                SplitStrategy::Disjoint);
        break;
      case AArch64::ORRWrs:
        Changed |= visitORR(MI);
        break;
      case AArch64::ADDWrr:
        Changed |= visitADDSUB<uint32_t>(AArch64::ADDWri, AArch64::SUBWri, MI);
        break;
      case AArch64::SUBWrr:
        Changed |= visitADDSUB<uint32_t>(AArch64::SUBWri, AArch64::ADDWri, MI);
        break;
      case AArch64::ADDXrr:
        Changed |= visitADDSUB<uint64_t>(AArch64::ADDXri, AArch64::SUBXri, MI);
        break;
      case AArch64::SUBXrr:
        Changed |= visitADDSUB<uint64_t>(AArch64::SUBXri, AArch64::ADDXri, MI);
        break;
      case AArch64::ADDSWrr:
        Changed |=
            visitADDSSUBS<uint32_t>({AArch64::ADDWri, AArch64::ADDSWri},
                                    {AArch64::SUBWri, AArch64::SUBSWri}, MI);
        break;
      case AArch64::SUBSWrr:
        Changed |=
            visitADDSSUBS<uint32_t>({AArch64::SUBWri, AArch64::SUBSWri},
                                    {AArch64::ADDWri, AArch64::ADDSWri}, MI);
        break;
      case AArch64::ADDSXrr:
        Changed |=
            visitADDSSUBS<uint64_t>({AArch64::ADDXri, AArch64::ADDSXri},
                                    {AArch64::SUBXri, AArch64::SUBSXri}, MI);
        break;
      case AArch64::SUBSXrr:
        Changed |=
            visitADDSSUBS<uint64_t>({AArch64::SUBXri, AArch64::SUBSXri},
                                    {AArch64::ADDXri, AArch64::ADDSXri}, MI);
        break;
      case AArch64::CSELWr:
      case AArch64::CSELXr:
        Changed |= visitCSEL(MI);
        break;
      case AArch64::INSvi64gpr:
        Changed |= visitINSviGPR(MI, AArch64::INSvi64lane);
        break;
      case AArch64::INSvi32gpr:
        Changed |= visitINSviGPR(MI, AArch64::INSvi32lane);
        break;
      case AArch64::INSvi16gpr:
        Changed |= visitINSviGPR(MI, AArch64::INSvi16lane);
        break;
      case AArch64::INSvi8gpr:
        Changed |= visitINSviGPR(MI, AArch64::INSvi8lane);
        break;
      case AArch64::INSvi64lane:
        Changed |= visitINSvi64lane(MI);
        break;
      case AArch64::FMOVDr:
        Changed |= visitFMOVDr(MI);
        break;
      case AArch64::UBFMXri:
        Changed |= visitUBFMXri(MI);
        break;
      case AArch64::COPY:
        Changed |= visitCopy(MI);
        break;
      }
    }
  }

  return Changed;
}

bool AArch64MIPeepholeOptLegacy::runOnMachineFunction(MachineFunction &MF) {
  if (skipFunction(MF.getFunction()))
    return false;

  MachineLoopInfo &MLI = getAnalysis<MachineLoopInfoWrapperPass>().getLI();
  return AArch64MIPeepholeOptImpl(MLI).run(MF);
}

FunctionPass *llvm::createAArch64MIPeepholeOptLegacyPass() {
  return new AArch64MIPeepholeOptLegacy();
}

PreservedAnalyses
AArch64MIPeepholeOptPass::run(MachineFunction &MF,
                              MachineFunctionAnalysisManager &MFAM) {
  MachineLoopInfo &MLI = MFAM.getResult<MachineLoopAnalysis>(MF);
  const bool Changed = AArch64MIPeepholeOptImpl(MLI).run(MF);
  if (!Changed)
    return PreservedAnalyses::all();
  PreservedAnalyses PA = getMachineFunctionPassPreservedAnalyses();
  PA.preserveSet<CFGAnalyses>();
  return PA;
}