llvm/test/Other/opt-bisect-new-pass-manager.ll

; This file verifies the behavior of the OptBisect class, which is used to
; diagnose optimization related failures.  The tests check various
; invocations that result in different sets of optimization passes that
; are run in different ways.
;
; Because the exact set of optimizations that will be run is expected to
; change over time, the checks for disabling passes are written in a
; conservative way that avoids assumptions about which specific passes
; will be disabled.

; RUN: opt -disable-output -disable-verify \
; RUN:     -passes=inferattrs -opt-bisect-limit=-1 %s 2>&1 \
; RUN:     | FileCheck %s --check-prefix=CHECK-MODULE-PASS
; CHECK-MODULE-PASS: BISECT: running pass (1) inferattrs on [module]

; RUN: opt -disable-output -disable-verify \
; RUN:     -passes=inferattrs -opt-bisect-limit=0 %s 2>&1 \
; RUN:     | FileCheck %s --check-prefix=CHECK-LIMIT-MODULE-PASS
; CHECK-LIMIT-MODULE-PASS: BISECT: NOT running pass (1) inferattrs on [module]

; RUN: opt -disable-output -debug-pass-manager \
; RUN:     -passes=inferattrs -opt-bisect-limit=-1 %s 2>&1 \
; RUN:     | FileCheck %s --check-prefix=CHECK-REQUIRED-PASS
; CHECK-REQUIRED-PASS: BISECT: running pass (1) inferattrs on [module]
; CHECK-REQUIRED-PASS-NOT: BISECT: {{.*}}VerifierPass
; CHECK-REQUIRED-PASS: Running pass: VerifierPass

; RUN: opt -disable-output -debug-pass-manager \
; RUN:     -passes=inferattrs -opt-bisect-limit=0 %s 2>&1 \
; RUN:     | FileCheck %s --check-prefix=CHECK-LIMIT-REQUIRED-PASS
; CHECK-LIMIT-REQUIRED-PASS: BISECT: NOT running pass (1) inferattrs on [module]
; CHECK-LIMIT-REQUIRED-PASS-NOT: BISECT: {{.*}}VerifierPass
; CHECK-LIMIT-REQUIRED-PASS: Running pass: VerifierPass

; RUN: opt -disable-output -disable-verify \
; RUN:     -passes=early-cse -opt-bisect-limit=-1 %s 2>&1 \
; RUN:     | FileCheck %s --check-prefix=CHECK-FUNCTION-PASS
; CHECK-FUNCTION-PASS: BISECT: running pass (1) early-cse on f1
; CHECK-FUNCTION-PASS: BISECT: running pass (2) early-cse on f2
; CHECK-FUNCTION-PASS: BISECT: running pass (3) early-cse on f3
; CHECK-FUNCTION-PASS: BISECT: running pass (4) early-cse on f4

; RUN: opt -disable-output -disable-verify \
; RUN:     -passes=early-cse -opt-bisect-limit=2 %s 2>&1 \
; RUN:     | FileCheck %s --check-prefix=CHECK-LIMIT-FUNCTION-PASS
; CHECK-LIMIT-FUNCTION-PASS: BISECT: running pass (1) early-cse on f1
; CHECK-LIMIT-FUNCTION-PASS: BISECT: running pass (2) early-cse on f2
; CHECK-LIMIT-FUNCTION-PASS: BISECT: NOT running pass (3) early-cse on f3
; CHECK-LIMIT-FUNCTION-PASS: BISECT: NOT running pass (4) early-cse on f4

; RUN: opt -disable-output -disable-verify \
; RUN:     -passes=function-attrs -opt-bisect-limit=-1 %s 2>&1 \
; RUN:     | FileCheck %s --check-prefix=CHECK-CGSCC-PASS
; CHECK-CGSCC-PASS: BISECT: running pass (1) function-attrs on (f1)
; CHECK-CGSCC-PASS: BISECT: running pass (2) function-attrs on (f2)
; CHECK-CGSCC-PASS: BISECT: running pass (3) function-attrs on (f3)
; CHECK-CGSCC-PASS: BISECT: running pass (4) function-attrs on (f4)

; RUN: opt -disable-output -disable-verify \
; RUN:     -passes=function-attrs -opt-bisect-limit=3 %s 2>&1 \
; RUN:     | FileCheck %s --check-prefix=CHECK-LIMIT-CGSCC-PASS
; CHECK-LIMIT-CGSCC-PASS: BISECT: running pass (1) function-attrs on (f1)
; CHECK-LIMIT-CGSCC-PASS: BISECT: running pass (2) function-attrs on (f2)
; CHECK-LIMIT-CGSCC-PASS: BISECT: running pass (3) function-attrs on (f3)
; CHECK-LIMIT-CGSCC-PASS: BISECT: NOT running pass (4) function-attrs on (f4)

; RUN: opt -disable-output -disable-verify -opt-bisect-limit=-1 \
; RUN:     -passes='inferattrs,cgscc(function-attrs,function(early-cse))' %s 2>&1 \
; RUN:     | FileCheck %s --check-prefix=CHECK-MULTI-PASS
; CHECK-MULTI-PASS: BISECT: running pass (1) inferattrs on [module]
; CHECK-MULTI-PASS: BISECT: running pass (2) function-attrs on (f1)
; CHECK-MULTI-PASS: BISECT: running pass (3) early-cse on f1
; CHECK-MULTI-PASS: BISECT: running pass (4) function-attrs on (f2)
; CHECK-MULTI-PASS: BISECT: running pass (5) early-cse on f2
; CHECK-MULTI-PASS: BISECT: running pass (6) function-attrs on (f3)
; CHECK-MULTI-PASS: BISECT: running pass (7) early-cse on f3
; CHECK-MULTI-PASS: BISECT: running pass (8) function-attrs on (f4)
; CHECK-MULTI-PASS: BISECT: running pass (9) early-cse on f4

; RUN: opt -disable-output -disable-verify -opt-bisect-limit=7 \
; RUN:     -passes='inferattrs,cgscc(function-attrs,function(early-cse))' %s 2>&1 \
; RUN:     | FileCheck %s --check-prefix=CHECK-LIMIT-MULTI-PASS
; CHECK-LIMIT-MULTI-PASS: BISECT: running pass (1) inferattrs on [module]
; CHECK-LIMIT-MULTI-PASS: BISECT: running pass (2) function-attrs on (f1)
; CHECK-LIMIT-MULTI-PASS: BISECT: running pass (3) early-cse on f1
; CHECK-LIMIT-MULTI-PASS: BISECT: running pass (4) function-attrs on (f2)
; CHECK-LIMIT-MULTI-PASS: BISECT: running pass (5) early-cse on f2
; CHECK-LIMIT-MULTI-PASS: BISECT: running pass (6) function-attrs on (f3)
; CHECK-LIMIT-MULTI-PASS: BISECT: running pass (7) early-cse on f3
; CHECK-LIMIT-MULTI-PASS: BISECT: NOT running pass (8) function-attrs on (f4)
; CHECK-LIMIT-MULTI-PASS: BISECT: NOT running pass (9) early-cse on f4

; Make sure we don't skip writing the output to stdout.
; RUN: opt %s -opt-bisect-limit=0 -passes=early-cse | opt -S | FileCheck %s -check-prefix=CHECK-OUTPUT
; RUN: opt %s -opt-bisect-limit=0 -passes=early-cse -S | FileCheck %s -check-prefix=CHECK-OUTPUT
; CHECK-OUTPUT: define void @f1

; Make sure we write ThinLTO bitcode
; RUN: opt %s -opt-bisect-limit=0 -disable-verify -thinlto-bc -o /dev/null 2>&1 | FileCheck --allow-empty %s -check-prefix=CHECK-THINLTO
; CHECK-THINLTO-NOT: NOT running pass

declare i32 @g()

define void @f1(i1 %arg) {
entry:
  br label %loop.0
loop.0:
  br i1 %arg, label %loop.0.0, label %loop.1
loop.0.0:
  br i1 %arg, label %loop.0.0, label %loop.0.1
loop.0.1:
  br i1 %arg, label %loop.0.1, label %loop.0
loop.1:
  br i1 %arg, label %loop.1, label %loop.1.bb1
loop.1.bb1:
  br i1 %arg, label %loop.1, label %loop.1.bb2
loop.1.bb2:
  br i1 %arg, label %end, label %loop.1.0
loop.1.0:
  br i1 %arg, label %loop.1.0, label %loop.1
end:
  ret void
}

define i32 @f2() {
entry:
  ret i32 0
}

define i32 @f3() {
entry:
  %temp = call i32 @g()
  %icmp = icmp ugt i32 %temp, 2
  br i1 %icmp, label %bb.true, label %bb.false
bb.true:
  %temp2 = call i32 @f2()
  ret i32 %temp2
bb.false:
  ret i32 0
}

; This function is here to verify that opt-bisect can skip all passes for
; functions that contain lifetime intrinsics.
define void @f4(i1 %arg) {
entry:
  %i = alloca i32, align 4
  call void @llvm.lifetime.start(i64 4, ptr %i)
  br label %for.cond

for.cond:
  br i1 %arg, label %for.body, label %for.end

for.body:
  br label %for.cond

for.end:
  ret void
}

declare void @llvm.lifetime.start(i64, ptr nocapture)