| ! RUN: %flang_fc1 -fopenmp-simd -fdebug-dump-parse-tree %s 2>&1 | FileCheck %s | |
| ! Test that non-SIMD OpenMPConstructs are removed on the parse tree level | |
| ! when -fopenmp-simd is specified. | |
| ! Tests the logic in lib/Semantics/rewrite-parse-tree.cpp | |
| ! CHECK-LABEL: Name = 'test_simd' | |
| subroutine test_simd() | |
| integer :: i | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPLoopConstruct | |
| ! CHECK: OmpDirectiveName -> llvm::omp::Directive = simd | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> DoConstruct | |
| !$omp simd | |
| do i = 1, 100 | |
| end do | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_do_simd' | |
| subroutine test_do_simd() | |
| integer :: i | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPLoopConstruct | |
| ! CHECK: OmpDirectiveName -> llvm::omp::Directive = do simd | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> DoConstruct | |
| !$omp do simd | |
| do i = 1, 100 | |
| end do | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_parallel_do_simd' | |
| subroutine test_parallel_do_simd() | |
| integer :: i | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPLoopConstruct | |
| ! CHECK: OmpDirectiveName -> llvm::omp::Directive = parallel do simd | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> DoConstruct | |
| !$omp parallel do simd | |
| do i = 1, 100 | |
| end do | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_simd_scan' | |
| subroutine test_simd_scan() | |
| integer :: i | |
| real :: sum | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPLoopConstruct | |
| ! CHECK: OmpDirectiveName -> llvm::omp::Directive = simd | |
| !$omp simd reduction(inscan,+:sum) | |
| do i = 1, N | |
| sum = sum + a(i) | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPStandaloneConstruct -> OpenMPSimpleStandaloneConstruct -> OmpDirectiveSpecification | |
| ! CHECK: OmpDirectiveName -> llvm::omp::Directive = scan | |
| !$omp scan inclusive(sum) | |
| sum = sum + a(i) | |
| end do | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_simd_atomic' | |
| subroutine test_simd_atomic() | |
| integer :: i, x | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPLoopConstruct | |
| ! CHECK: OmpDirectiveName -> llvm::omp::Directive = simd | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> DoConstruct | |
| !$omp simd | |
| do i = 1, 100 | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPAtomicConstruct | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> ActionStmt -> AssignmentStmt = 'x=i' | |
| !$omp atomic write | |
| x = i | |
| end do | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_do' | |
| subroutine test_do() | |
| integer :: i | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPLoopConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = do | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> DoConstruct | |
| !$omp parallel do | |
| do i = 1, 100 | |
| end do | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_do_nested' | |
| subroutine test_do_nested() | |
| integer :: i | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPLoopConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = parallel do | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> DoConstruct | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> DoConstruct | |
| !$omp parallel do | |
| do i = 1, 100 | |
| do j = 1, 100 | |
| end do | |
| end do | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_target' | |
| subroutine test_target() | |
| integer :: i | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPBlockct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = target | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> DoConstruct | |
| !$omp target | |
| do i = 1, 100 | |
| end do | |
| !$omp end target | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_target_teams_distribute' | |
| subroutine test_target_teams_distribute() | |
| integer :: i | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPLoopConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = target teams distribute | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> DoConstruct | |
| !$omp target teams distribute | |
| do i = 1, 100 | |
| end do | |
| !$omp end target teams distribute | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_target_data' | |
| subroutine test_target_data() | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OmpBlockConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = target data | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> DoConstruct | |
| !$omp target data map(to: A) map(tofrom: B) | |
| do i = 1, 100 | |
| end do | |
| !$omp end target data | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_loop' | |
| subroutine test_loop() | |
| integer :: i | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPLoopConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = loop | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> DoConstruct | |
| !$omp loop bind(thread) | |
| do i = 1, 100 | |
| end do | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_unroll' | |
| subroutine test_unroll() | |
| integer :: i | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPLoopConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = unroll | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> DoConstruct | |
| !$omp unroll | |
| do i = 1, 100 | |
| end do | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_do_ordered' | |
| subroutine test_do_ordered() | |
| integer :: i, x | |
| x = 0 | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPLoopConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = do | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> DoConstruct | |
| !$omp do ordered | |
| do i = 1, 100 | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OmpBlockConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = ordered | |
| !$omp ordered | |
| x = x + 1 | |
| !$omp end ordered | |
| end do | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_cancel' | |
| subroutine test_cancel() | |
| integer :: i, x | |
| x = 0 | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPLoopConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = parallel do | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> DoConstruct | |
| !$omp parallel do | |
| do i = 1, 100 | |
| if (i == 10) then | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPStandaloneConstruct -> OpenMPCancelConstruct -> OmpDirectiveSpecification | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = cancel | |
| !$omp cancel do | |
| end if | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPStandaloneConstruct -> OpenMPCancellationPointConstruct -> OmpDirectiveSpecification | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = cancellation point | |
| !$omp cancellation point do | |
| end do | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_scan' | |
| subroutine test_scan() | |
| integer :: i, sum | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPLoopConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = parallel do | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> DoConstruct | |
| !$omp parallel do reduction(inscan, +: sum) | |
| do i = 1, n | |
| sum = sum + i | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPStandaloneConstruct -> OpenMPSimpleStandaloneConstruct -> OmpDirectiveSpecification | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = scan | |
| !$omp scan inclusive(sum) | |
| end do | |
| !$omp end parallel do | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_target_map' | |
| subroutine test_target_map() | |
| integer :: array(10) | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OmpBlockConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = target | |
| !$omp target map(tofrom: array(2:10)) | |
| array(2) = array(2) * 2 | |
| !$omp end target | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_sections' | |
| subroutine test_sections() | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPSectionsConstruct | |
| !$omp sections | |
| ! CHECK-NOT: OpenMPConstruct -> OmpSectionDirective | |
| !$omp section | |
| ! CHECK-NOT: OpenMPConstruct -> OmpSectionDirective | |
| !$omp section | |
| !$omp end sections | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_threadprivate_mod' | |
| module test_threadprivate_mod | |
| implicit none | |
| ! CHECK: DeclarationConstruct -> SpecificationConstruct -> TypeDeclarationStmt | |
| ! CHECK: Name = 'x' | |
| ! CHECK: Name = 'y' | |
| integer :: x, y | |
| ! CHECK: DeclarationConstruct -> SpecificationConstruct -> OtherSpecificationStmt -> CommonStmt | |
| ! CHECK: Name = 'x' | |
| ! CHECK: Name = 'y' | |
| common /vars/ x, y | |
| ! CHECK-NOT: DeclarationConstruct -> SpecificationConstruct -> OpenMPDeclarativeConstruct -> OmpThreadprivateDirective | |
| !$omp threadprivate(/vars/) | |
| end module | |
| ! CHECK-LABEL: Name = 'test_atomic' | |
| subroutine test_atomic() | |
| real :: z, x, y | |
| !$omp parallel private(tid, z) | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPAtomicConstruct | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> ActionStmt -> AssignmentStmt = 'x=y' | |
| !$omp atomic write | |
| x = y | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPAtomicConstruct | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> ActionStmt -> AssignmentStmt = 'z=x' | |
| !$omp atomic read | |
| z = x | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPAtomicConstruct | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> ActionStmt -> AssignmentStmt = 'x=x+1._4' | |
| !$omp atomic update | |
| x = x + 1 | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPAtomicConstruct | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> ActionStmt -> AssignmentStmt = 'z=x' | |
| !$omp atomic read | |
| z = x | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPAtomicConstruct | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> ActionStmt -> AssignmentStmt = 'x=x+y' | |
| !$omp atomic capture | |
| x = x + y | |
| !$omp end atomic | |
| !$omp end parallel | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_task_single_taskwait' | |
| subroutine test_task_single_taskwait() | |
| integer :: x | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OmpBlockConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = parallel | |
| !$omp parallel | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OmpBlockConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = single | |
| !$omp single | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> DoConstruct | |
| do i = 1, 5 | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OmpBlockConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = task | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> ActionStmt -> AssignmentStmt = 'x=i' | |
| !$omp task | |
| x = i | |
| !$omp end task | |
| end do | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPStandaloneConstruct -> OpenMPSimpleStandaloneConstruct -> OmpDirectiveSpecification | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = taskwait | |
| !$omp taskwait | |
| !$omp end single | |
| !$omp end parallel | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_task_taskyield_flush_barrier' | |
| subroutine test_task_taskyield_flush_barrier() | |
| integer :: x, i | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OmpBlockConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = parallel | |
| !$omp parallel | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPStandaloneConstruct -> OpenMPSimpleStandaloneConstruct -> OmpDirectiveSpecification | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = barrier | |
| !$omp barrier | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OmpBlockConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = single | |
| !$omp single | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OmpBlockConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = task | |
| !$omp task | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPStandaloneConstruct -> OpenMPSimpleStandaloneConstruct -> OmpDirectiveSpecification | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = taskyield | |
| !$omp taskyield | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> ActionStmt -> AssignmentStmt = 'x=i' | |
| x = i | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPStandaloneConstruct -> OpenMPFlushConstruct -> OmpDirectiveSpecification | |
| !$omp flush | |
| !$omp end task | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OmpBlockConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = task | |
| !$omp task | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPStandaloneConstruct -> OpenMPFlushConstruct -> OmpDirectiveSpecification | |
| !$omp flush | |
| !$omp end task | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPStandaloneConstruct -> OpenMPSimpleStandaloneConstruct -> OmpDirectiveSpecification | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = taskwait | |
| !$omp taskwait | |
| !$omp end single | |
| !$omp end parallel | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_master_masked' | |
| subroutine test_master_masked() | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OmpBlockConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = parallel | |
| !$omp parallel private(tid) | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OmpBlockConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = masked | |
| !$omp masked | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> ActionStmt -> AssignmentStmt = 'x=y' | |
| x = y | |
| !$omp end masked | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OmpBlockConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = master | |
| !$omp master | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> ActionStmt -> AssignmentStmt = 'y=x' | |
| y = x | |
| !$omp end master | |
| !$omp end parallel | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_critical' | |
| subroutine test_critical() | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OmpBlockConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = parallel | |
| !$omp parallel do private(i) | |
| do i = 1, 4 | |
| !$omp critical(mylock) | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> ActionStmt -> AssignmentStmt = 'x=y' | |
| x = y | |
| !$omp end critical(mylock) | |
| end do | |
| !$omp end parallel do | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_target_enter_exit_update_data' | |
| subroutine test_target_enter_exit_update_data() | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPStandaloneConstruct -> OpenMPSimpleStandaloneConstruct -> OmpDirectiveSpecification | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = target enter data | |
| !$omp target enter data map(to: A) | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OmpBlockConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = target teams distribute parallel do | |
| !$omp target teams distribute parallel do | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> DoConstruct | |
| do i = 1, n | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> ActionStmt -> AssignmentStmt = 'x=y' | |
| x = y | |
| end do | |
| !$omp end target teams distribute parallel do | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPStandaloneConstruct -> OpenMPSimpleStandaloneConstruct -> OmpDirectiveSpecification | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = target update | |
| !$omp target update from(A) | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPStandaloneConstruct -> OpenMPSimpleStandaloneConstruct -> OmpDirectiveSpecification | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = target exit data | |
| !$omp target exit data map(from: A) | |
| end subroutine | |
| ! CHECK-LABEL: Name = 'test_declare_mapper' | |
| module test_declare_mapper | |
| implicit none | |
| type :: myvec_t | |
| integer :: len | |
| real, allocatable :: data(:) | |
| end type myvec_t | |
| ! CHECK-NOT: DeclarationConstruct -> SpecificationConstruct -> OpenMPDeclarativeConstruct -> OmpDeclareMapperDirective | |
| !$omp declare mapper(myvec_t :: v) map(v, v%data(1:v%len)) | |
| end module | |
| ! CHECK-LABEL: Name = 'test_dispatch' | |
| subroutine test_dispatch() | |
| ! CHECK-NOT: ExecutionPartConstruct -> ExecutableConstruct -> OpenMPConstruct -> OpenMPDispatchConstruct | |
| ! CHECK-NOT: OmpDirectiveName -> llvm::omp::Directive = dispatch | |
| ! CHECK: ExecutionPartConstruct -> ExecutableConstruct -> ActionStmt -> CallStmt | |
| !$omp dispatch | |
| call foo() | |
| contains | |
| subroutine foo() | |
| end subroutine | |
| end subroutine |