| //===-- InstrProfiling.cpp - Frontend instrumentation based profiling -----===// | |
| // | |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. | |
| // See https://llvm.org/LICENSE.txt for license information. | |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| // This pass lowers instrprof_* intrinsics emitted by an instrumentor. | |
| // It also builds the data structures and initialization code needed for | |
| // updating execution counts and emitting the profile at runtime. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #include "llvm/Transforms/Instrumentation/InstrProfiling.h" | |
| #include "llvm/ADT/ArrayRef.h" | |
| #include "llvm/ADT/STLExtras.h" | |
| #include "llvm/ADT/SmallVector.h" | |
| #include "llvm/ADT/StringRef.h" | |
| #include "llvm/ADT/Twine.h" | |
| #include "llvm/Analysis/BlockFrequencyInfo.h" | |
| #include "llvm/Analysis/BranchProbabilityInfo.h" | |
| #include "llvm/Analysis/CFG.h" | |
| #include "llvm/Analysis/LoopInfo.h" | |
| #include "llvm/Analysis/TargetLibraryInfo.h" | |
| #include "llvm/IR/Attributes.h" | |
| #include "llvm/IR/BasicBlock.h" | |
| #include "llvm/IR/CFG.h" | |
| #include "llvm/IR/Constant.h" | |
| #include "llvm/IR/Constants.h" | |
| #include "llvm/IR/DIBuilder.h" | |
| #include "llvm/IR/DerivedTypes.h" | |
| #include "llvm/IR/DiagnosticInfo.h" | |
| #include "llvm/IR/Dominators.h" | |
| #include "llvm/IR/Function.h" | |
| #include "llvm/IR/GlobalValue.h" | |
| #include "llvm/IR/GlobalVariable.h" | |
| #include "llvm/IR/IRBuilder.h" | |
| #include "llvm/IR/Instruction.h" | |
| #include "llvm/IR/Instructions.h" | |
| #include "llvm/IR/IntrinsicInst.h" | |
| #include "llvm/IR/MDBuilder.h" | |
| #include "llvm/IR/Module.h" | |
| #include "llvm/IR/Type.h" | |
| #include "llvm/Pass.h" | |
| #include "llvm/ProfileData/InstrProf.h" | |
| #include "llvm/ProfileData/InstrProfCorrelator.h" | |
| #include "llvm/Support/Casting.h" | |
| #include "llvm/Support/CommandLine.h" | |
| #include "llvm/Support/Compiler.h" | |
| #include "llvm/Support/Error.h" | |
| #include "llvm/Support/ErrorHandling.h" | |
| #include "llvm/TargetParser/Triple.h" | |
| #include "llvm/Transforms/Instrumentation/PGOInstrumentation.h" | |
| #include "llvm/Transforms/Utils/BasicBlockUtils.h" | |
| #include "llvm/Transforms/Utils/Instrumentation.h" | |
| #include "llvm/Transforms/Utils/ModuleUtils.h" | |
| #include "llvm/Transforms/Utils/SSAUpdater.h" | |
| #include <algorithm> | |
| #include <cassert> | |
| #include <cstdint> | |
| #include <string> | |
| using namespace llvm; | |
| #define DEBUG_TYPE "instrprof" | |
| namespace llvm { | |
| // Command line option to enable vtable value profiling. Defined in | |
| // ProfileData/InstrProf.cpp: -enable-vtable-value-profiling= | |
| extern cl::opt<bool> EnableVTableValueProfiling; | |
| LLVM_ABI cl::opt<InstrProfCorrelator::ProfCorrelatorKind> ProfileCorrelate( | |
| "profile-correlate", | |
| cl::desc("Use debug info or binary file to correlate profiles."), | |
| cl::init(InstrProfCorrelator::NONE), | |
| cl::values(clEnumValN(InstrProfCorrelator::NONE, "", | |
| "No profile correlation"), | |
| clEnumValN(InstrProfCorrelator::DEBUG_INFO, "debug-info", | |
| "Use debug info to correlate"), | |
| clEnumValN(InstrProfCorrelator::BINARY, "binary", | |
| "Use binary to correlate"))); | |
| } // namespace llvm | |
| namespace { | |
| cl::opt<bool> DoHashBasedCounterSplit( | |
| "hash-based-counter-split", | |
| cl::desc("Rename counter variable of a comdat function based on cfg hash"), | |
| cl::init(true)); | |
| cl::opt<bool> | |
| RuntimeCounterRelocation("runtime-counter-relocation", | |
| cl::desc("Enable relocating counters at runtime."), | |
| cl::init(false)); | |
| cl::opt<bool> ValueProfileStaticAlloc( | |
| "vp-static-alloc", | |
| cl::desc("Do static counter allocation for value profiler"), | |
| cl::init(true)); | |
| cl::opt<double> NumCountersPerValueSite( | |
| "vp-counters-per-site", | |
| cl::desc("The average number of profile counters allocated " | |
| "per value profiling site."), | |
| // This is set to a very small value because in real programs, only | |
| // a very small percentage of value sites have non-zero targets, e.g, 1/30. | |
| // For those sites with non-zero profile, the average number of targets | |
| // is usually smaller than 2. | |
| cl::init(1.0)); | |
| cl::opt<bool> AtomicCounterUpdateAll( | |
| "instrprof-atomic-counter-update-all", | |
| cl::desc("Make all profile counter updates atomic (for testing only)"), | |
| cl::init(false)); | |
| cl::opt<bool> AtomicCounterUpdatePromoted( | |
| "atomic-counter-update-promoted", | |
| cl::desc("Do counter update using atomic fetch add " | |
| " for promoted counters only"), | |
| cl::init(false)); | |
| cl::opt<bool> AtomicFirstCounter( | |
| "atomic-first-counter", | |
| cl::desc("Use atomic fetch add for first counter in a function (usually " | |
| "the entry counter)"), | |
| cl::init(false)); | |
| cl::opt<bool> ConditionalCounterUpdate( | |
| "conditional-counter-update", | |
| cl::desc("Do conditional counter updates in single byte counters mode)"), | |
| cl::init(false)); | |
| // If the option is not specified, the default behavior about whether | |
| // counter promotion is done depends on how instrumentation lowering | |
| // pipeline is setup, i.e., the default value of true of this option | |
| // does not mean the promotion will be done by default. Explicitly | |
| // setting this option can override the default behavior. | |
| cl::opt<bool> DoCounterPromotion("do-counter-promotion", | |
| cl::desc("Do counter register promotion"), | |
| cl::init(false)); | |
| cl::opt<unsigned> MaxNumOfPromotionsPerLoop( | |
| "max-counter-promotions-per-loop", cl::init(20), | |
| cl::desc("Max number counter promotions per loop to avoid" | |
| " increasing register pressure too much")); | |
| // A debug option | |
| cl::opt<int> | |
| MaxNumOfPromotions("max-counter-promotions", cl::init(-1), | |
| cl::desc("Max number of allowed counter promotions")); | |
| cl::opt<unsigned> SpeculativeCounterPromotionMaxExiting( | |
| "speculative-counter-promotion-max-exiting", cl::init(3), | |
| cl::desc("The max number of exiting blocks of a loop to allow " | |
| " speculative counter promotion")); | |
| cl::opt<bool> SpeculativeCounterPromotionToLoop( | |
| "speculative-counter-promotion-to-loop", | |
| cl::desc("When the option is false, if the target block is in a loop, " | |
| "the promotion will be disallowed unless the promoted counter " | |
| " update can be further/iteratively promoted into an acyclic " | |
| " region.")); | |
| cl::opt<bool> IterativeCounterPromotion( | |
| "iterative-counter-promotion", cl::init(true), | |
| cl::desc("Allow counter promotion across the whole loop nest.")); | |
| cl::opt<bool> SkipRetExitBlock( | |
| "skip-ret-exit-block", cl::init(true), | |
| cl::desc("Suppress counter promotion if exit blocks contain ret.")); | |
| static cl::opt<bool> SampledInstr("sampled-instrumentation", | |
| cl::desc("Do PGO instrumentation sampling")); | |
| static cl::opt<unsigned> SampledInstrPeriod( | |
| "sampled-instr-period", | |
| cl::desc("Set the profile instrumentation sample period. A sample period " | |
| "of 0 is invalid. For each sample period, a fixed number of " | |
| "consecutive samples will be recorded. The number is controlled " | |
| "by 'sampled-instr-burst-duration' flag. The default sample " | |
| "period of 65536 is optimized for generating efficient code that " | |
| "leverages unsigned short integer wrapping in overflow, but this " | |
| "is disabled under simple sampling (burst duration = 1)."), | |
| cl::init(USHRT_MAX + 1)); | |
| static cl::opt<unsigned> SampledInstrBurstDuration( | |
| "sampled-instr-burst-duration", | |
| cl::desc("Set the profile instrumentation burst duration, which can range " | |
| "from 1 to the value of 'sampled-instr-period' (0 is invalid). " | |
| "This number of samples will be recorded for each " | |
| "'sampled-instr-period' count update. Setting to 1 enables simple " | |
| "sampling, in which case it is recommended to set " | |
| "'sampled-instr-period' to a prime number."), | |
| cl::init(200)); | |
| struct SampledInstrumentationConfig { | |
| unsigned BurstDuration; | |
| unsigned Period; | |
| bool UseShort; | |
| bool IsSimpleSampling; | |
| bool IsFastSampling; | |
| }; | |
| static SampledInstrumentationConfig getSampledInstrumentationConfig() { | |
| SampledInstrumentationConfig config; | |
| config.BurstDuration = SampledInstrBurstDuration.getValue(); | |
| config.Period = SampledInstrPeriod.getValue(); | |
| if (config.BurstDuration > config.Period) | |
| report_fatal_error( | |
| "SampledBurstDuration must be less than or equal to SampledPeriod"); | |
| if (config.Period == 0 || config.BurstDuration == 0) | |
| report_fatal_error( | |
| "SampledPeriod and SampledBurstDuration must be greater than 0"); | |
| config.IsSimpleSampling = (config.BurstDuration == 1); | |
| // If (BurstDuration == 1 && Period == 65536), generate the simple sampling | |
| // style code. | |
| config.IsFastSampling = | |
| (!config.IsSimpleSampling && config.Period == USHRT_MAX + 1); | |
| config.UseShort = (config.Period <= USHRT_MAX) || config.IsFastSampling; | |
| return config; | |
| } | |
| using LoadStorePair = std::pair<Instruction *, Instruction *>; | |
| static uint64_t getIntModuleFlagOrZero(const Module &M, StringRef Flag) { | |
| auto *MD = dyn_cast_or_null<ConstantAsMetadata>(M.getModuleFlag(Flag)); | |
| if (!MD) | |
| return 0; | |
| // If the flag is a ConstantAsMetadata, it should be an integer representable | |
| // in 64-bits. | |
| return cast<ConstantInt>(MD->getValue())->getZExtValue(); | |
| } | |
| static bool enablesValueProfiling(const Module &M) { | |
| return isIRPGOFlagSet(&M) || | |
| getIntModuleFlagOrZero(M, "EnableValueProfiling") != 0; | |
| } | |
| // Conservatively returns true if value profiling is enabled. | |
| static bool profDataReferencedByCode(const Module &M) { | |
| return enablesValueProfiling(M); | |
| } | |
| class InstrLowerer final { | |
| public: | |
| InstrLowerer(Module &M, const InstrProfOptions &Options, | |
| std::function<const TargetLibraryInfo &(Function &F)> GetTLI, | |
| bool IsCS) | |
| : M(M), Options(Options), TT(M.getTargetTriple()), IsCS(IsCS), | |
| GetTLI(GetTLI), DataReferencedByCode(profDataReferencedByCode(M)) {} | |
| bool lower(); | |
| private: | |
| Module &M; | |
| const InstrProfOptions Options; | |
| const Triple TT; | |
| // Is this lowering for the context-sensitive instrumentation. | |
| const bool IsCS; | |
| std::function<const TargetLibraryInfo &(Function &F)> GetTLI; | |
| const bool DataReferencedByCode; | |
| struct PerFunctionProfileData { | |
| uint32_t NumValueSites[IPVK_Last + 1] = {}; | |
| GlobalVariable *RegionCounters = nullptr; | |
| GlobalVariable *DataVar = nullptr; | |
| GlobalVariable *RegionBitmaps = nullptr; | |
| uint32_t NumBitmapBytes = 0; | |
| PerFunctionProfileData() = default; | |
| }; | |
| DenseMap<GlobalVariable *, PerFunctionProfileData> ProfileDataMap; | |
| // Key is virtual table variable, value is 'VTableProfData' in the form of | |
| // GlobalVariable. | |
| DenseMap<GlobalVariable *, GlobalVariable *> VTableDataMap; | |
| /// If runtime relocation is enabled, this maps functions to the load | |
| /// instruction that produces the profile relocation bias. | |
| DenseMap<const Function *, LoadInst *> FunctionToProfileBiasMap; | |
| std::vector<GlobalValue *> CompilerUsedVars; | |
| std::vector<GlobalValue *> UsedVars; | |
| std::vector<GlobalVariable *> ReferencedNames; | |
| // The list of virtual table variables of which the VTableProfData is | |
| // collected. | |
| std::vector<GlobalVariable *> ReferencedVTables; | |
| GlobalVariable *NamesVar = nullptr; | |
| size_t NamesSize = 0; | |
| // vector of counter load/store pairs to be register promoted. | |
| std::vector<LoadStorePair> PromotionCandidates; | |
| int64_t TotalCountersPromoted = 0; | |
| /// Lower instrumentation intrinsics in the function. Returns true if there | |
| /// any lowering. | |
| bool lowerIntrinsics(Function *F); | |
| /// Register-promote counter loads and stores in loops. | |
| void promoteCounterLoadStores(Function *F); | |
| /// Returns true if relocating counters at runtime is enabled. | |
| bool isRuntimeCounterRelocationEnabled() const; | |
| /// Returns true if profile counter update register promotion is enabled. | |
| bool isCounterPromotionEnabled() const; | |
| /// Return true if profile sampling is enabled. | |
| bool isSamplingEnabled() const; | |
| /// Count the number of instrumented value sites for the function. | |
| void computeNumValueSiteCounts(InstrProfValueProfileInst *Ins); | |
| /// Replace instrprof.value.profile with a call to runtime library. | |
| void lowerValueProfileInst(InstrProfValueProfileInst *Ins); | |
| /// Replace instrprof.cover with a store instruction to the coverage byte. | |
| void lowerCover(InstrProfCoverInst *Inc); | |
| /// Replace instrprof.timestamp with a call to | |
| /// INSTR_PROF_PROFILE_SET_TIMESTAMP. | |
| void lowerTimestamp(InstrProfTimestampInst *TimestampInstruction); | |
| /// Replace instrprof.increment with an increment of the appropriate value. | |
| void lowerIncrement(InstrProfIncrementInst *Inc); | |
| /// Force emitting of name vars for unused functions. | |
| void lowerCoverageData(GlobalVariable *CoverageNamesVar); | |
| /// Replace instrprof.mcdc.tvbitmask.update with a shift and or instruction | |
| /// using the index represented by the a temp value into a bitmap. | |
| void lowerMCDCTestVectorBitmapUpdate(InstrProfMCDCTVBitmapUpdate *Ins); | |
| /// Get the Bias value for data to access mmap-ed area. | |
| /// Create it if it hasn't been seen. | |
| GlobalVariable *getOrCreateBiasVar(StringRef VarName); | |
| /// Compute the address of the counter value that this profiling instruction | |
| /// acts on. | |
| Value *getCounterAddress(InstrProfCntrInstBase *I); | |
| /// Lower the incremental instructions under profile sampling predicates. | |
| void doSampling(Instruction *I); | |
| /// Get the region counters for an increment, creating them if necessary. | |
| /// | |
| /// If the counter array doesn't yet exist, the profile data variables | |
| /// referring to them will also be created. | |
| GlobalVariable *getOrCreateRegionCounters(InstrProfCntrInstBase *Inc); | |
| /// Create the region counters. | |
| GlobalVariable *createRegionCounters(InstrProfCntrInstBase *Inc, | |
| StringRef Name, | |
| GlobalValue::LinkageTypes Linkage); | |
| /// Compute the address of the test vector bitmap that this profiling | |
| /// instruction acts on. | |
| Value *getBitmapAddress(InstrProfMCDCTVBitmapUpdate *I); | |
| /// Get the region bitmaps for an increment, creating them if necessary. | |
| /// | |
| /// If the bitmap array doesn't yet exist, the profile data variables | |
| /// referring to them will also be created. | |
| GlobalVariable *getOrCreateRegionBitmaps(InstrProfMCDCBitmapInstBase *Inc); | |
| /// Create the MC/DC bitmap as a byte-aligned array of bytes associated with | |
| /// an MC/DC Decision region. The number of bytes required is indicated by | |
| /// the intrinsic used (type InstrProfMCDCBitmapInstBase). This is called | |
| /// as part of setupProfileSection() and is conceptually very similar to | |
| /// what is done for profile data counters in createRegionCounters(). | |
| GlobalVariable *createRegionBitmaps(InstrProfMCDCBitmapInstBase *Inc, | |
| StringRef Name, | |
| GlobalValue::LinkageTypes Linkage); | |
| /// Set Comdat property of GV, if required. | |
| void maybeSetComdat(GlobalVariable *GV, GlobalObject *GO, StringRef VarName); | |
| /// Setup the sections into which counters and bitmaps are allocated. | |
| GlobalVariable *setupProfileSection(InstrProfInstBase *Inc, | |
| InstrProfSectKind IPSK); | |
| /// Create INSTR_PROF_DATA variable for counters and bitmaps. | |
| void createDataVariable(InstrProfCntrInstBase *Inc); | |
| /// Get the counters for virtual table values, creating them if necessary. | |
| void getOrCreateVTableProfData(GlobalVariable *GV); | |
| /// Emit the section with compressed function names. | |
| void emitNameData(); | |
| /// Emit the section with compressed vtable names. | |
| void emitVTableNames(); | |
| /// Emit value nodes section for value profiling. | |
| void emitVNodes(); | |
| /// Emit runtime registration functions for each profile data variable. | |
| void emitRegistration(); | |
| /// Emit the necessary plumbing to pull in the runtime initialization. | |
| /// Returns true if a change was made. | |
| bool emitRuntimeHook(); | |
| /// Add uses of our data variables and runtime hook. | |
| void emitUses(); | |
| /// Create a static initializer for our data, on platforms that need it, | |
| /// and for any profile output file that was specified. | |
| void emitInitialization(); | |
| }; | |
| /// | |
| /// A helper class to promote one counter RMW operation in the loop | |
| /// into register update. | |
| /// | |
| /// RWM update for the counter will be sinked out of the loop after | |
| /// the transformation. | |
| /// | |
| class PGOCounterPromoterHelper : public LoadAndStorePromoter { | |
| public: | |
| PGOCounterPromoterHelper( | |
| Instruction *L, Instruction *S, SSAUpdater &SSA, Value *Init, | |
| BasicBlock *PH, ArrayRef<BasicBlock *> ExitBlocks, | |
| ArrayRef<Instruction *> InsertPts, | |
| DenseMap<Loop *, SmallVector<LoadStorePair, 8>> &LoopToCands, | |
| LoopInfo &LI) | |
| : LoadAndStorePromoter({L, S}, SSA), Store(S), ExitBlocks(ExitBlocks), | |
| InsertPts(InsertPts), LoopToCandidates(LoopToCands), LI(LI) { | |
| assert(isa<LoadInst>(L)); | |
| assert(isa<StoreInst>(S)); | |
| SSA.AddAvailableValue(PH, Init); | |
| } | |
| void doExtraRewritesBeforeFinalDeletion() override { | |
| for (unsigned i = 0, e = ExitBlocks.size(); i != e; ++i) { | |
| BasicBlock *ExitBlock = ExitBlocks[i]; | |
| Instruction *InsertPos = InsertPts[i]; | |
| // Get LiveIn value into the ExitBlock. If there are multiple | |
| // predecessors, the value is defined by a PHI node in this | |
| // block. | |
| Value *LiveInValue = SSA.GetValueInMiddleOfBlock(ExitBlock); | |
| Value *Addr = cast<StoreInst>(Store)->getPointerOperand(); | |
| Type *Ty = LiveInValue->getType(); | |
| IRBuilder<> Builder(InsertPos); | |
| if (auto *AddrInst = dyn_cast_or_null<IntToPtrInst>(Addr)) { | |
| // If isRuntimeCounterRelocationEnabled() is true then the address of | |
| // the store instruction is computed with two instructions in | |
| // InstrProfiling::getCounterAddress(). We need to copy those | |
| // instructions to this block to compute Addr correctly. | |
| // %BiasAdd = add i64 ptrtoint <__profc_>, <__llvm_profile_counter_bias> | |
| // %Addr = inttoptr i64 %BiasAdd to i64* | |
| auto *OrigBiasInst = dyn_cast<BinaryOperator>(AddrInst->getOperand(0)); | |
| assert(OrigBiasInst->getOpcode() == Instruction::BinaryOps::Add); | |
| Value *BiasInst = Builder.Insert(OrigBiasInst->clone()); | |
| Addr = Builder.CreateIntToPtr(BiasInst, | |
| PointerType::getUnqual(Ty->getContext())); | |
| } | |
| if (AtomicCounterUpdatePromoted) | |
| // automic update currently can only be promoted across the current | |
| // loop, not the whole loop nest. | |
| Builder.CreateAtomicRMW(AtomicRMWInst::Add, Addr, LiveInValue, | |
| MaybeAlign(), | |
| AtomicOrdering::SequentiallyConsistent); | |
| else { | |
| LoadInst *OldVal = Builder.CreateLoad(Ty, Addr, "pgocount.promoted"); | |
| auto *NewVal = Builder.CreateAdd(OldVal, LiveInValue); | |
| auto *NewStore = Builder.CreateStore(NewVal, Addr); | |
| // Now update the parent loop's candidate list: | |
| if (IterativeCounterPromotion) { | |
| auto *TargetLoop = LI.getLoopFor(ExitBlock); | |
| if (TargetLoop) | |
| LoopToCandidates[TargetLoop].emplace_back(OldVal, NewStore); | |
| } | |
| } | |
| } | |
| } | |
| private: | |
| Instruction *Store; | |
| ArrayRef<BasicBlock *> ExitBlocks; | |
| ArrayRef<Instruction *> InsertPts; | |
| DenseMap<Loop *, SmallVector<LoadStorePair, 8>> &LoopToCandidates; | |
| LoopInfo &LI; | |
| }; | |
| /// A helper class to do register promotion for all profile counter | |
| /// updates in a loop. | |
| /// | |
| class PGOCounterPromoter { | |
| public: | |
| PGOCounterPromoter( | |
| DenseMap<Loop *, SmallVector<LoadStorePair, 8>> &LoopToCands, | |
| Loop &CurLoop, LoopInfo &LI, BlockFrequencyInfo *BFI) | |
| : LoopToCandidates(LoopToCands), L(CurLoop), LI(LI), BFI(BFI) { | |
| // Skip collection of ExitBlocks and InsertPts for loops that will not be | |
| // able to have counters promoted. | |
| SmallVector<BasicBlock *, 8> LoopExitBlocks; | |
| SmallPtrSet<BasicBlock *, 8> BlockSet; | |
| L.getExitBlocks(LoopExitBlocks); | |
| if (!isPromotionPossible(&L, LoopExitBlocks)) | |
| return; | |
| for (BasicBlock *ExitBlock : LoopExitBlocks) { | |
| if (BlockSet.insert(ExitBlock).second && | |
| llvm::none_of(predecessors(ExitBlock), [&](const BasicBlock *Pred) { | |
| return llvm::isPresplitCoroSuspendExitEdge(*Pred, *ExitBlock); | |
| })) { | |
| ExitBlocks.push_back(ExitBlock); | |
| InsertPts.push_back(&*ExitBlock->getFirstInsertionPt()); | |
| } | |
| } | |
| } | |
| bool run(int64_t *NumPromoted) { | |
| // Skip 'infinite' loops: | |
| if (ExitBlocks.size() == 0) | |
| return false; | |
| // Skip if any of the ExitBlocks contains a ret instruction. | |
| // This is to prevent dumping of incomplete profile -- if the | |
| // the loop is a long running loop and dump is called in the middle | |
| // of the loop, the result profile is incomplete. | |
| // FIXME: add other heuristics to detect long running loops. | |
| if (SkipRetExitBlock) { | |
| for (auto *BB : ExitBlocks) | |
| if (isa<ReturnInst>(BB->getTerminator())) | |
| return false; | |
| } | |
| unsigned MaxProm = getMaxNumOfPromotionsInLoop(&L); | |
| if (MaxProm == 0) | |
| return false; | |
| unsigned Promoted = 0; | |
| for (auto &Cand : LoopToCandidates[&L]) { | |
| SmallVector<PHINode *, 4> NewPHIs; | |
| SSAUpdater SSA(&NewPHIs); | |
| Value *InitVal = ConstantInt::get(Cand.first->getType(), 0); | |
| // If BFI is set, we will use it to guide the promotions. | |
| if (BFI) { | |
| auto *BB = Cand.first->getParent(); | |
| auto InstrCount = BFI->getBlockProfileCount(BB); | |
| if (!InstrCount) | |
| continue; | |
| auto PreheaderCount = BFI->getBlockProfileCount(L.getLoopPreheader()); | |
| // If the average loop trip count is not greater than 1.5, we skip | |
| // promotion. | |
| if (PreheaderCount && (*PreheaderCount * 3) >= (*InstrCount * 2)) | |
| continue; | |
| } | |
| PGOCounterPromoterHelper Promoter(Cand.first, Cand.second, SSA, InitVal, | |
| L.getLoopPreheader(), ExitBlocks, | |
| InsertPts, LoopToCandidates, LI); | |
| Promoter.run(SmallVector<Instruction *, 2>({Cand.first, Cand.second})); | |
| Promoted++; | |
| if (Promoted >= MaxProm) | |
| break; | |
| (*NumPromoted)++; | |
| if (MaxNumOfPromotions != -1 && *NumPromoted >= MaxNumOfPromotions) | |
| break; | |
| } | |
| LLVM_DEBUG(dbgs() << Promoted << " counters promoted for loop (depth=" | |
| << L.getLoopDepth() << ")\n"); | |
| return Promoted != 0; | |
| } | |
| private: | |
| bool allowSpeculativeCounterPromotion(Loop *LP) { | |
| SmallVector<BasicBlock *, 8> ExitingBlocks; | |
| L.getExitingBlocks(ExitingBlocks); | |
| // Not considierered speculative. | |
| if (ExitingBlocks.size() == 1) | |
| return true; | |
| if (ExitingBlocks.size() > SpeculativeCounterPromotionMaxExiting) | |
| return false; | |
| return true; | |
| } | |
| // Check whether the loop satisfies the basic conditions needed to perform | |
| // Counter Promotions. | |
| bool | |
| isPromotionPossible(Loop *LP, | |
| const SmallVectorImpl<BasicBlock *> &LoopExitBlocks) { | |
| // We can't insert into a catchswitch. | |
| if (llvm::any_of(LoopExitBlocks, [](BasicBlock *Exit) { | |
| return isa<CatchSwitchInst>(Exit->getTerminator()); | |
| })) | |
| return false; | |
| if (!LP->hasDedicatedExits()) | |
| return false; | |
| BasicBlock *PH = LP->getLoopPreheader(); | |
| if (!PH) | |
| return false; | |
| return true; | |
| } | |
| // Returns the max number of Counter Promotions for LP. | |
| unsigned getMaxNumOfPromotionsInLoop(Loop *LP) { | |
| SmallVector<BasicBlock *, 8> LoopExitBlocks; | |
| LP->getExitBlocks(LoopExitBlocks); | |
| if (!isPromotionPossible(LP, LoopExitBlocks)) | |
| return 0; | |
| SmallVector<BasicBlock *, 8> ExitingBlocks; | |
| LP->getExitingBlocks(ExitingBlocks); | |
| // If BFI is set, we do more aggressive promotions based on BFI. | |
| if (BFI) | |
| return (unsigned)-1; | |
| // Not considierered speculative. | |
| if (ExitingBlocks.size() == 1) | |
| return MaxNumOfPromotionsPerLoop; | |
| if (ExitingBlocks.size() > SpeculativeCounterPromotionMaxExiting) | |
| return 0; | |
| // Whether the target block is in a loop does not matter: | |
| if (SpeculativeCounterPromotionToLoop) | |
| return MaxNumOfPromotionsPerLoop; | |
| // Now check the target block: | |
| unsigned MaxProm = MaxNumOfPromotionsPerLoop; | |
| for (auto *TargetBlock : LoopExitBlocks) { | |
| auto *TargetLoop = LI.getLoopFor(TargetBlock); | |
| if (!TargetLoop) | |
| continue; | |
| unsigned MaxPromForTarget = getMaxNumOfPromotionsInLoop(TargetLoop); | |
| unsigned PendingCandsInTarget = LoopToCandidates[TargetLoop].size(); | |
| MaxProm = | |
| std::min(MaxProm, std::max(MaxPromForTarget, PendingCandsInTarget) - | |
| PendingCandsInTarget); | |
| } | |
| return MaxProm; | |
| } | |
| DenseMap<Loop *, SmallVector<LoadStorePair, 8>> &LoopToCandidates; | |
| SmallVector<BasicBlock *, 8> ExitBlocks; | |
| SmallVector<Instruction *, 8> InsertPts; | |
| Loop &L; | |
| LoopInfo &LI; | |
| BlockFrequencyInfo *BFI; | |
| }; | |
| enum class ValueProfilingCallType { | |
| // Individual values are tracked. Currently used for indiret call target | |
| // profiling. | |
| Default, | |
| // MemOp: the memop size value profiling. | |
| MemOp | |
| }; | |
| } // end anonymous namespace | |
| PreservedAnalyses InstrProfilingLoweringPass::run(Module &M, | |
| ModuleAnalysisManager &AM) { | |
| FunctionAnalysisManager &FAM = | |
| AM.getResult<FunctionAnalysisManagerModuleProxy>(M).getManager(); | |
| auto GetTLI = [&FAM](Function &F) -> TargetLibraryInfo & { | |
| return FAM.getResult<TargetLibraryAnalysis>(F); | |
| }; | |
| InstrLowerer Lowerer(M, Options, GetTLI, IsCS); | |
| if (!Lowerer.lower()) | |
| return PreservedAnalyses::all(); | |
| return PreservedAnalyses::none(); | |
| } | |
| // | |
| // Perform instrumentation sampling. | |
| // | |
| // There are 3 favors of sampling: | |
| // (1) Full burst sampling: We transform: | |
| // Increment_Instruction; | |
| // to: | |
| // if (__llvm_profile_sampling__ <= SampledInstrBurstDuration - 1) { | |
| // Increment_Instruction; | |
| // } | |
| // __llvm_profile_sampling__ += 1; | |
| // if (__llvm_profile_sampling__ >= SampledInstrPeriod) { | |
| // __llvm_profile_sampling__ = 0; | |
| // } | |
| // | |
| // "__llvm_profile_sampling__" is a thread-local global shared by all PGO | |
| // counters (value-instrumentation and edge instrumentation). | |
| // | |
| // (2) Fast burst sampling: | |
| // "__llvm_profile_sampling__" variable is an unsigned type, meaning it will | |
| // wrap around to zero when overflows. In this case, the second check is | |
| // unnecessary, so we won't generate check2 when the SampledInstrPeriod is | |
| // set to 65536 (64K). The code after: | |
| // if (__llvm_profile_sampling__ <= SampledInstrBurstDuration - 1) { | |
| // Increment_Instruction; | |
| // } | |
| // __llvm_profile_sampling__ += 1; | |
| // | |
| // (3) Simple sampling: | |
| // When SampledInstrBurstDuration is set to 1, we do a simple sampling: | |
| // __llvm_profile_sampling__ += 1; | |
| // if (__llvm_profile_sampling__ >= SampledInstrPeriod) { | |
| // __llvm_profile_sampling__ = 0; | |
| // Increment_Instruction; | |
| // } | |
| // | |
| // Note that, the code snippet after the transformation can still be counter | |
| // promoted. However, with sampling enabled, counter updates are expected to | |
| // be infrequent, making the benefits of counter promotion negligible. | |
| // Moreover, counter promotion can potentially cause issues in server | |
| // applications, particularly when the counters are dumped without a clean | |
| // exit. To mitigate this risk, counter promotion is disabled by default when | |
| // sampling is enabled. This behavior can be overridden using the internal | |
| // option. | |
| void InstrLowerer::doSampling(Instruction *I) { | |
| if (!isSamplingEnabled()) | |
| return; | |
| SampledInstrumentationConfig config = getSampledInstrumentationConfig(); | |
| auto GetConstant = [&config](IRBuilder<> &Builder, uint32_t C) { | |
| if (config.UseShort) | |
| return Builder.getInt16(C); | |
| else | |
| return Builder.getInt32(C); | |
| }; | |
| IntegerType *SamplingVarTy; | |
| if (config.UseShort) | |
| SamplingVarTy = Type::getInt16Ty(M.getContext()); | |
| else | |
| SamplingVarTy = Type::getInt32Ty(M.getContext()); | |
| auto *SamplingVar = | |
| M.getGlobalVariable(INSTR_PROF_QUOTE(INSTR_PROF_PROFILE_SAMPLING_VAR)); | |
| assert(SamplingVar && "SamplingVar not set properly"); | |
| // Create the condition for checking the burst duration. | |
| Instruction *SamplingVarIncr; | |
| Value *NewSamplingVarVal; | |
| MDBuilder MDB(I->getContext()); | |
| MDNode *BranchWeight; | |
| IRBuilder<> CondBuilder(I); | |
| auto *LoadSamplingVar = CondBuilder.CreateLoad(SamplingVarTy, SamplingVar); | |
| if (config.IsSimpleSampling) { | |
| // For the simple sampling, just create the load and increments. | |
| IRBuilder<> IncBuilder(I); | |
| NewSamplingVarVal = | |
| IncBuilder.CreateAdd(LoadSamplingVar, GetConstant(IncBuilder, 1)); | |
| SamplingVarIncr = IncBuilder.CreateStore(NewSamplingVarVal, SamplingVar); | |
| } else { | |
| // For the burst-sampling, create the conditional update. | |
| auto *DurationCond = CondBuilder.CreateICmpULE( | |
| LoadSamplingVar, GetConstant(CondBuilder, config.BurstDuration - 1)); | |
| BranchWeight = MDB.createBranchWeights( | |
| config.BurstDuration, config.Period - config.BurstDuration); | |
| Instruction *ThenTerm = SplitBlockAndInsertIfThen( | |
| DurationCond, I, /* Unreachable */ false, BranchWeight); | |
| IRBuilder<> IncBuilder(I); | |
| NewSamplingVarVal = | |
| IncBuilder.CreateAdd(LoadSamplingVar, GetConstant(IncBuilder, 1)); | |
| SamplingVarIncr = IncBuilder.CreateStore(NewSamplingVarVal, SamplingVar); | |
| I->moveBefore(ThenTerm->getIterator()); | |
| } | |
| if (config.IsFastSampling) | |
| return; | |
| // Create the condition for checking the period. | |
| Instruction *ThenTerm, *ElseTerm; | |
| IRBuilder<> PeriodCondBuilder(SamplingVarIncr); | |
| auto *PeriodCond = PeriodCondBuilder.CreateICmpUGE( | |
| NewSamplingVarVal, GetConstant(PeriodCondBuilder, config.Period)); | |
| BranchWeight = MDB.createBranchWeights(1, config.Period - 1); | |
| SplitBlockAndInsertIfThenElse(PeriodCond, SamplingVarIncr, &ThenTerm, | |
| &ElseTerm, BranchWeight); | |
| // For the simple sampling, the counter update happens in sampling var reset. | |
| if (config.IsSimpleSampling) | |
| I->moveBefore(ThenTerm->getIterator()); | |
| IRBuilder<> ResetBuilder(ThenTerm); | |
| ResetBuilder.CreateStore(GetConstant(ResetBuilder, 0), SamplingVar); | |
| SamplingVarIncr->moveBefore(ElseTerm->getIterator()); | |
| } | |
| bool InstrLowerer::lowerIntrinsics(Function *F) { | |
| bool MadeChange = false; | |
| PromotionCandidates.clear(); | |
| SmallVector<InstrProfInstBase *, 8> InstrProfInsts; | |
| // To ensure compatibility with sampling, we save the intrinsics into | |
| // a buffer to prevent potential breakage of the iterator (as the | |
| // intrinsics will be moved to a different BB). | |
| for (BasicBlock &BB : *F) { | |
| for (Instruction &Instr : llvm::make_early_inc_range(BB)) { | |
| if (auto *IP = dyn_cast<InstrProfInstBase>(&Instr)) | |
| InstrProfInsts.push_back(IP); | |
| } | |
| } | |
| for (auto *Instr : InstrProfInsts) { | |
| doSampling(Instr); | |
| if (auto *IPIS = dyn_cast<InstrProfIncrementInstStep>(Instr)) { | |
| lowerIncrement(IPIS); | |
| MadeChange = true; | |
| } else if (auto *IPI = dyn_cast<InstrProfIncrementInst>(Instr)) { | |
| lowerIncrement(IPI); | |
| MadeChange = true; | |
| } else if (auto *IPC = dyn_cast<InstrProfTimestampInst>(Instr)) { | |
| lowerTimestamp(IPC); | |
| MadeChange = true; | |
| } else if (auto *IPC = dyn_cast<InstrProfCoverInst>(Instr)) { | |
| lowerCover(IPC); | |
| MadeChange = true; | |
| } else if (auto *IPVP = dyn_cast<InstrProfValueProfileInst>(Instr)) { | |
| lowerValueProfileInst(IPVP); | |
| MadeChange = true; | |
| } else if (auto *IPMP = dyn_cast<InstrProfMCDCBitmapParameters>(Instr)) { | |
| IPMP->eraseFromParent(); | |
| MadeChange = true; | |
| } else if (auto *IPBU = dyn_cast<InstrProfMCDCTVBitmapUpdate>(Instr)) { | |
| lowerMCDCTestVectorBitmapUpdate(IPBU); | |
| MadeChange = true; | |
| } | |
| } | |
| if (!MadeChange) | |
| return false; | |
| promoteCounterLoadStores(F); | |
| return true; | |
| } | |
| bool InstrLowerer::isRuntimeCounterRelocationEnabled() const { | |
| // Mach-O don't support weak external references. | |
| if (TT.isOSBinFormatMachO()) | |
| return false; | |
| if (RuntimeCounterRelocation.getNumOccurrences() > 0) | |
| return RuntimeCounterRelocation; | |
| // Fuchsia uses runtime counter relocation by default. | |
| return TT.isOSFuchsia(); | |
| } | |
| bool InstrLowerer::isSamplingEnabled() const { | |
| if (SampledInstr.getNumOccurrences() > 0) | |
| return SampledInstr; | |
| return Options.Sampling; | |
| } | |
| bool InstrLowerer::isCounterPromotionEnabled() const { | |
| if (DoCounterPromotion.getNumOccurrences() > 0) | |
| return DoCounterPromotion; | |
| return Options.DoCounterPromotion; | |
| } | |
| void InstrLowerer::promoteCounterLoadStores(Function *F) { | |
| if (!isCounterPromotionEnabled()) | |
| return; | |
| DominatorTree DT(*F); | |
| LoopInfo LI(DT); | |
| DenseMap<Loop *, SmallVector<LoadStorePair, 8>> LoopPromotionCandidates; | |
| std::unique_ptr<BlockFrequencyInfo> BFI; | |
| if (Options.UseBFIInPromotion) { | |
| std::unique_ptr<BranchProbabilityInfo> BPI; | |
| BPI.reset(new BranchProbabilityInfo(*F, LI, &GetTLI(*F))); | |
| BFI.reset(new BlockFrequencyInfo(*F, *BPI, LI)); | |
| } | |
| for (const auto &LoadStore : PromotionCandidates) { | |
| auto *CounterLoad = LoadStore.first; | |
| auto *CounterStore = LoadStore.second; | |
| BasicBlock *BB = CounterLoad->getParent(); | |
| Loop *ParentLoop = LI.getLoopFor(BB); | |
| if (!ParentLoop) | |
| continue; | |
| LoopPromotionCandidates[ParentLoop].emplace_back(CounterLoad, CounterStore); | |
| } | |
| SmallVector<Loop *, 4> Loops = LI.getLoopsInPreorder(); | |
| // Do a post-order traversal of the loops so that counter updates can be | |
| // iteratively hoisted outside the loop nest. | |
| for (auto *Loop : llvm::reverse(Loops)) { | |
| PGOCounterPromoter Promoter(LoopPromotionCandidates, *Loop, LI, BFI.get()); | |
| Promoter.run(&TotalCountersPromoted); | |
| } | |
| } | |
| static bool needsRuntimeHookUnconditionally(const Triple &TT) { | |
| // On Fuchsia, we only need runtime hook if any counters are present. | |
| if (TT.isOSFuchsia()) | |
| return false; | |
| return true; | |
| } | |
| /// Check if the module contains uses of any profiling intrinsics. | |
| static bool containsProfilingIntrinsics(Module &M) { | |
| auto containsIntrinsic = [&](int ID) { | |
| if (auto *F = Intrinsic::getDeclarationIfExists(&M, ID)) | |
| return !F->use_empty(); | |
| return false; | |
| }; | |
| return containsIntrinsic(Intrinsic::instrprof_cover) || | |
| containsIntrinsic(Intrinsic::instrprof_increment) || | |
| containsIntrinsic(Intrinsic::instrprof_increment_step) || | |
| containsIntrinsic(Intrinsic::instrprof_timestamp) || | |
| containsIntrinsic(Intrinsic::instrprof_value_profile); | |
| } | |
| bool InstrLowerer::lower() { | |
| bool MadeChange = false; | |
| bool NeedsRuntimeHook = needsRuntimeHookUnconditionally(TT); | |
| if (NeedsRuntimeHook) | |
| MadeChange = emitRuntimeHook(); | |
| if (!IsCS && isSamplingEnabled()) | |
| createProfileSamplingVar(M); | |
| bool ContainsProfiling = containsProfilingIntrinsics(M); | |
| GlobalVariable *CoverageNamesVar = | |
| M.getNamedGlobal(getCoverageUnusedNamesVarName()); | |
| // Improve compile time by avoiding linear scans when there is no work. | |
| if (!ContainsProfiling && !CoverageNamesVar) | |
| return MadeChange; | |
| // We did not know how many value sites there would be inside | |
| // the instrumented function. This is counting the number of instrumented | |
| // target value sites to enter it as field in the profile data variable. | |
| for (Function &F : M) { | |
| InstrProfCntrInstBase *FirstProfInst = nullptr; | |
| for (BasicBlock &BB : F) { | |
| for (auto I = BB.begin(), E = BB.end(); I != E; I++) { | |
| if (auto *Ind = dyn_cast<InstrProfValueProfileInst>(I)) | |
| computeNumValueSiteCounts(Ind); | |
| else { | |
| if (FirstProfInst == nullptr && | |
| (isa<InstrProfIncrementInst>(I) || isa<InstrProfCoverInst>(I))) | |
| FirstProfInst = dyn_cast<InstrProfCntrInstBase>(I); | |
| // If the MCDCBitmapParameters intrinsic seen, create the bitmaps. | |
| if (const auto &Params = dyn_cast<InstrProfMCDCBitmapParameters>(I)) | |
| static_cast<void>(getOrCreateRegionBitmaps(Params)); | |
| } | |
| } | |
| } | |
| // Use a profile intrinsic to create the region counters and data variable. | |
| // Also create the data variable based on the MCDCParams. | |
| if (FirstProfInst != nullptr) { | |
| static_cast<void>(getOrCreateRegionCounters(FirstProfInst)); | |
| } | |
| } | |
| if (EnableVTableValueProfiling) | |
| for (GlobalVariable &GV : M.globals()) | |
| // Global variables with type metadata are virtual table variables. | |
| if (GV.hasMetadata(LLVMContext::MD_type)) | |
| getOrCreateVTableProfData(&GV); | |
| for (Function &F : M) | |
| MadeChange |= lowerIntrinsics(&F); | |
| if (CoverageNamesVar) { | |
| lowerCoverageData(CoverageNamesVar); | |
| MadeChange = true; | |
| } | |
| if (!MadeChange) | |
| return false; | |
| emitVNodes(); | |
| emitNameData(); | |
| emitVTableNames(); | |
| // Emit runtime hook for the cases where the target does not unconditionally | |
| // require pulling in profile runtime, and coverage is enabled on code that is | |
| // not eliminated by the front-end, e.g. unused functions with internal | |
| // linkage. | |
| if (!NeedsRuntimeHook && ContainsProfiling) | |
| emitRuntimeHook(); | |
| emitRegistration(); | |
| emitUses(); | |
| emitInitialization(); | |
| return true; | |
| } | |
| static FunctionCallee getOrInsertValueProfilingCall( | |
| Module &M, const TargetLibraryInfo &TLI, | |
| ValueProfilingCallType CallType = ValueProfilingCallType::Default) { | |
| LLVMContext &Ctx = M.getContext(); | |
| auto *ReturnTy = Type::getVoidTy(M.getContext()); | |
| AttributeList AL; | |
| if (auto AK = TLI.getExtAttrForI32Param(false)) | |
| AL = AL.addParamAttribute(M.getContext(), 2, AK); | |
| assert((CallType == ValueProfilingCallType::Default || | |
| CallType == ValueProfilingCallType::MemOp) && | |
| "Must be Default or MemOp"); | |
| Type *ParamTypes[] = { | |
| #define VALUE_PROF_FUNC_PARAM(ParamType, ParamName, ParamLLVMType) ParamLLVMType | |
| #include "llvm/ProfileData/InstrProfData.inc" | |
| }; | |
| auto *ValueProfilingCallTy = | |
| FunctionType::get(ReturnTy, ArrayRef(ParamTypes), false); | |
| StringRef FuncName = CallType == ValueProfilingCallType::Default | |
| ? getInstrProfValueProfFuncName() | |
| : getInstrProfValueProfMemOpFuncName(); | |
| return M.getOrInsertFunction(FuncName, ValueProfilingCallTy, AL); | |
| } | |
| void InstrLowerer::computeNumValueSiteCounts(InstrProfValueProfileInst *Ind) { | |
| GlobalVariable *Name = Ind->getName(); | |
| uint64_t ValueKind = Ind->getValueKind()->getZExtValue(); | |
| uint64_t Index = Ind->getIndex()->getZExtValue(); | |
| auto &PD = ProfileDataMap[Name]; | |
| PD.NumValueSites[ValueKind] = | |
| std::max(PD.NumValueSites[ValueKind], (uint32_t)(Index + 1)); | |
| } | |
| void InstrLowerer::lowerValueProfileInst(InstrProfValueProfileInst *Ind) { | |
| // TODO: Value profiling heavily depends on the data section which is omitted | |
| // in lightweight mode. We need to move the value profile pointer to the | |
| // Counter struct to get this working. | |
| assert( | |
| ProfileCorrelate == InstrProfCorrelator::NONE && | |
| "Value profiling is not yet supported with lightweight instrumentation"); | |
| GlobalVariable *Name = Ind->getName(); | |
| auto It = ProfileDataMap.find(Name); | |
| assert(It != ProfileDataMap.end() && It->second.DataVar && | |
| "value profiling detected in function with no counter increment"); | |
| GlobalVariable *DataVar = It->second.DataVar; | |
| uint64_t ValueKind = Ind->getValueKind()->getZExtValue(); | |
| uint64_t Index = Ind->getIndex()->getZExtValue(); | |
| for (uint32_t Kind = IPVK_First; Kind < ValueKind; ++Kind) | |
| Index += It->second.NumValueSites[Kind]; | |
| IRBuilder<> Builder(Ind); | |
| bool IsMemOpSize = (Ind->getValueKind()->getZExtValue() == | |
| llvm::InstrProfValueKind::IPVK_MemOPSize); | |
| CallInst *Call = nullptr; | |
| auto *TLI = &GetTLI(*Ind->getFunction()); | |
| auto *NormalizedDataVarPtr = ConstantExpr::getPointerBitCastOrAddrSpaceCast( | |
| DataVar, PointerType::get(M.getContext(), 0)); | |
| // To support value profiling calls within Windows exception handlers, funclet | |
| // information contained within operand bundles needs to be copied over to | |
| // the library call. This is required for the IR to be processed by the | |
| // WinEHPrepare pass. | |
| SmallVector<OperandBundleDef, 1> OpBundles; | |
| Ind->getOperandBundlesAsDefs(OpBundles); | |
| if (!IsMemOpSize) { | |
| Value *Args[3] = {Ind->getTargetValue(), NormalizedDataVarPtr, | |
| Builder.getInt32(Index)}; | |
| Call = Builder.CreateCall(getOrInsertValueProfilingCall(M, *TLI), Args, | |
| OpBundles); | |
| } else { | |
| Value *Args[3] = {Ind->getTargetValue(), NormalizedDataVarPtr, | |
| Builder.getInt32(Index)}; | |
| Call = Builder.CreateCall( | |
| getOrInsertValueProfilingCall(M, *TLI, ValueProfilingCallType::MemOp), | |
| Args, OpBundles); | |
| } | |
| if (auto AK = TLI->getExtAttrForI32Param(false)) | |
| Call->addParamAttr(2, AK); | |
| Ind->replaceAllUsesWith(Call); | |
| Ind->eraseFromParent(); | |
| } | |
| GlobalVariable *InstrLowerer::getOrCreateBiasVar(StringRef VarName) { | |
| GlobalVariable *Bias = M.getGlobalVariable(VarName); | |
| if (Bias) | |
| return Bias; | |
| Type *Int64Ty = Type::getInt64Ty(M.getContext()); | |
| // Compiler must define this variable when runtime counter relocation | |
| // is being used. Runtime has a weak external reference that is used | |
| // to check whether that's the case or not. | |
| Bias = new GlobalVariable(M, Int64Ty, false, GlobalValue::LinkOnceODRLinkage, | |
| Constant::getNullValue(Int64Ty), VarName); | |
| Bias->setVisibility(GlobalVariable::HiddenVisibility); | |
| // A definition that's weak (linkonce_odr) without being in a COMDAT | |
| // section wouldn't lead to link errors, but it would lead to a dead | |
| // data word from every TU but one. Putting it in COMDAT ensures there | |
| // will be exactly one data slot in the link. | |
| if (TT.supportsCOMDAT()) | |
| Bias->setComdat(M.getOrInsertComdat(VarName)); | |
| return Bias; | |
| } | |
| Value *InstrLowerer::getCounterAddress(InstrProfCntrInstBase *I) { | |
| auto *Counters = getOrCreateRegionCounters(I); | |
| IRBuilder<> Builder(I); | |
| if (isa<InstrProfTimestampInst>(I)) | |
| Counters->setAlignment(Align(8)); | |
| auto *Addr = Builder.CreateConstInBoundsGEP2_32( | |
| Counters->getValueType(), Counters, 0, I->getIndex()->getZExtValue()); | |
| if (!isRuntimeCounterRelocationEnabled()) | |
| return Addr; | |
| Type *Int64Ty = Type::getInt64Ty(M.getContext()); | |
| Function *Fn = I->getParent()->getParent(); | |
| LoadInst *&BiasLI = FunctionToProfileBiasMap[Fn]; | |
| if (!BiasLI) { | |
| IRBuilder<> EntryBuilder(&Fn->getEntryBlock().front()); | |
| auto *Bias = getOrCreateBiasVar(getInstrProfCounterBiasVarName()); | |
| BiasLI = EntryBuilder.CreateLoad(Int64Ty, Bias, "profc_bias"); | |
| // Bias doesn't change after startup. | |
| BiasLI->setMetadata(LLVMContext::MD_invariant_load, | |
| MDNode::get(M.getContext(), {})); | |
| } | |
| auto *Add = Builder.CreateAdd(Builder.CreatePtrToInt(Addr, Int64Ty), BiasLI); | |
| return Builder.CreateIntToPtr(Add, Addr->getType()); | |
| } | |
| Value *InstrLowerer::getBitmapAddress(InstrProfMCDCTVBitmapUpdate *I) { | |
| auto *Bitmaps = getOrCreateRegionBitmaps(I); | |
| if (!isRuntimeCounterRelocationEnabled()) | |
| return Bitmaps; | |
| // Put BiasLI onto the entry block. | |
| Type *Int64Ty = Type::getInt64Ty(M.getContext()); | |
| Function *Fn = I->getFunction(); | |
| IRBuilder<> EntryBuilder(&Fn->getEntryBlock().front()); | |
| auto *Bias = getOrCreateBiasVar(getInstrProfBitmapBiasVarName()); | |
| auto *BiasLI = EntryBuilder.CreateLoad(Int64Ty, Bias, "profbm_bias"); | |
| // Assume BiasLI invariant (in the function at least) | |
| BiasLI->setMetadata(LLVMContext::MD_invariant_load, | |
| MDNode::get(M.getContext(), {})); | |
| // Add Bias to Bitmaps and put it before the intrinsic. | |
| IRBuilder<> Builder(I); | |
| return Builder.CreatePtrAdd(Bitmaps, BiasLI, "profbm_addr"); | |
| } | |
| void InstrLowerer::lowerCover(InstrProfCoverInst *CoverInstruction) { | |
| auto *Addr = getCounterAddress(CoverInstruction); | |
| IRBuilder<> Builder(CoverInstruction); | |
| if (ConditionalCounterUpdate) { | |
| Instruction *SplitBefore = CoverInstruction->getNextNode(); | |
| auto &Ctx = CoverInstruction->getParent()->getContext(); | |
| auto *Int8Ty = llvm::Type::getInt8Ty(Ctx); | |
| Value *Load = Builder.CreateLoad(Int8Ty, Addr, "pgocount"); | |
| Value *Cmp = Builder.CreateIsNotNull(Load, "pgocount.ifnonzero"); | |
| Instruction *ThenBranch = | |
| SplitBlockAndInsertIfThen(Cmp, SplitBefore, false); | |
| Builder.SetInsertPoint(ThenBranch); | |
| } | |
| // We store zero to represent that this block is covered. | |
| Builder.CreateStore(Builder.getInt8(0), Addr); | |
| CoverInstruction->eraseFromParent(); | |
| } | |
| void InstrLowerer::lowerTimestamp( | |
| InstrProfTimestampInst *TimestampInstruction) { | |
| assert(TimestampInstruction->getIndex()->isNullValue() && | |
| "timestamp probes are always the first probe for a function"); | |
| auto &Ctx = M.getContext(); | |
| auto *TimestampAddr = getCounterAddress(TimestampInstruction); | |
| IRBuilder<> Builder(TimestampInstruction); | |
| auto *CalleeTy = | |
| FunctionType::get(Type::getVoidTy(Ctx), TimestampAddr->getType(), false); | |
| auto Callee = M.getOrInsertFunction( | |
| INSTR_PROF_QUOTE(INSTR_PROF_PROFILE_SET_TIMESTAMP), CalleeTy); | |
| Builder.CreateCall(Callee, {TimestampAddr}); | |
| TimestampInstruction->eraseFromParent(); | |
| } | |
| void InstrLowerer::lowerIncrement(InstrProfIncrementInst *Inc) { | |
| auto *Addr = getCounterAddress(Inc); | |
| IRBuilder<> Builder(Inc); | |
| if (isGPUProfTarget(M)) { | |
| auto *I64Ty = Builder.getInt64Ty(); | |
| auto *PtrTy = Builder.getPtrTy(); | |
| auto *CalleeTy = FunctionType::get(Type::getVoidTy(M.getContext()), | |
| {PtrTy, PtrTy, I64Ty}, false); | |
| auto Callee = | |
| M.getOrInsertFunction("__llvm_profile_instrument_gpu", CalleeTy); | |
| Value *CastAddr = Builder.CreatePointerBitCastOrAddrSpaceCast(Addr, PtrTy); | |
| Value *Uniform = | |
| ConstantPointerNull::get(PointerType::getUnqual(M.getContext())); | |
| Builder.CreateCall(Callee, {CastAddr, Uniform, Inc->getStep()}); | |
| } else if (Options.Atomic || AtomicCounterUpdateAll || | |
| (Inc->getIndex()->isNullValue() && AtomicFirstCounter)) { | |
| Builder.CreateAtomicRMW(AtomicRMWInst::Add, Addr, Inc->getStep(), | |
| MaybeAlign(), AtomicOrdering::Monotonic); | |
| } else { | |
| Value *IncStep = Inc->getStep(); | |
| Value *Load = Builder.CreateLoad(IncStep->getType(), Addr, "pgocount"); | |
| auto *Count = Builder.CreateAdd(Load, Inc->getStep()); | |
| auto *Store = Builder.CreateStore(Count, Addr); | |
| if (isCounterPromotionEnabled()) | |
| PromotionCandidates.emplace_back(cast<Instruction>(Load), Store); | |
| } | |
| Inc->eraseFromParent(); | |
| } | |
| void InstrLowerer::lowerCoverageData(GlobalVariable *CoverageNamesVar) { | |
| ConstantArray *Names = | |
| cast<ConstantArray>(CoverageNamesVar->getInitializer()); | |
| for (unsigned I = 0, E = Names->getNumOperands(); I < E; ++I) { | |
| Constant *NC = Names->getOperand(I); | |
| Value *V = NC->stripPointerCasts(); | |
| assert(isa<GlobalVariable>(V) && "Missing reference to function name"); | |
| GlobalVariable *Name = cast<GlobalVariable>(V); | |
| Name->setLinkage(GlobalValue::PrivateLinkage); | |
| ReferencedNames.push_back(Name); | |
| if (isa<ConstantExpr>(NC)) | |
| NC->dropAllReferences(); | |
| } | |
| CoverageNamesVar->eraseFromParent(); | |
| } | |
| void InstrLowerer::lowerMCDCTestVectorBitmapUpdate( | |
| InstrProfMCDCTVBitmapUpdate *Update) { | |
| auto &Ctx = M.getContext(); | |
| IRBuilder<> Builder(Update); | |
| auto *Int8Ty = Type::getInt8Ty(Ctx); | |
| auto *Int32Ty = Type::getInt32Ty(Ctx); | |
| auto *MCDCCondBitmapAddr = Update->getMCDCCondBitmapAddr(); | |
| auto *BitmapAddr = getBitmapAddress(Update); | |
| // Load Temp Val + BitmapIdx. | |
| // %mcdc.temp = load i32, ptr %mcdc.addr, align 4 | |
| auto *Temp = Builder.CreateAdd( | |
| Builder.CreateLoad(Int32Ty, MCDCCondBitmapAddr, "mcdc.temp"), | |
| Update->getBitmapIndex()); | |
| // Calculate byte offset using div8. | |
| // %1 = lshr i32 %mcdc.temp, 3 | |
| auto *BitmapByteOffset = Builder.CreateLShr(Temp, 0x3); | |
| // Add byte offset to section base byte address. | |
| // %4 = getelementptr inbounds i8, ptr @__profbm_test, i32 %1 | |
| auto *BitmapByteAddr = | |
| Builder.CreateInBoundsPtrAdd(BitmapAddr, BitmapByteOffset); | |
| // Calculate bit offset into bitmap byte by using div8 remainder (AND ~8) | |
| // %5 = and i32 %mcdc.temp, 7 | |
| // %6 = trunc i32 %5 to i8 | |
| auto *BitToSet = Builder.CreateTrunc(Builder.CreateAnd(Temp, 0x7), Int8Ty); | |
| // Shift bit offset left to form a bitmap. | |
| // %7 = shl i8 1, %6 | |
| auto *ShiftedVal = Builder.CreateShl(Builder.getInt8(0x1), BitToSet); | |
| // Load profile bitmap byte. | |
| // %mcdc.bits = load i8, ptr %4, align 1 | |
| auto *Bitmap = Builder.CreateLoad(Int8Ty, BitmapByteAddr, "mcdc.bits"); | |
| if (Options.Atomic || AtomicCounterUpdateAll) { | |
| // If ((Bitmap & Val) != Val), then execute atomic (Bitmap |= Val). | |
| // Note, just-loaded Bitmap might not be up-to-date. Use it just for | |
| // early testing. | |
| auto *Masked = Builder.CreateAnd(Bitmap, ShiftedVal); | |
| auto *ShouldStore = Builder.CreateICmpNE(Masked, ShiftedVal); | |
| // Assume updating will be rare. | |
| auto *Unlikely = MDBuilder(Ctx).createUnlikelyBranchWeights(); | |
| Instruction *ThenBranch = | |
| SplitBlockAndInsertIfThen(ShouldStore, Update, false, Unlikely); | |
| // Execute if (unlikely(ShouldStore)). | |
| Builder.SetInsertPoint(ThenBranch); | |
| Builder.CreateAtomicRMW(AtomicRMWInst::Or, BitmapByteAddr, ShiftedVal, | |
| MaybeAlign(), AtomicOrdering::Monotonic); | |
| } else { | |
| // Perform logical OR of profile bitmap byte and shifted bit offset. | |
| // %8 = or i8 %mcdc.bits, %7 | |
| auto *Result = Builder.CreateOr(Bitmap, ShiftedVal); | |
| // Store the updated profile bitmap byte. | |
| // store i8 %8, ptr %3, align 1 | |
| Builder.CreateStore(Result, BitmapByteAddr); | |
| } | |
| Update->eraseFromParent(); | |
| } | |
| /// Get the name of a profiling variable for a particular function. | |
| static std::string getVarName(InstrProfInstBase *Inc, StringRef Prefix, | |
| bool &Renamed) { | |
| StringRef NamePrefix = getInstrProfNameVarPrefix(); | |
| StringRef Name = Inc->getName()->getName().substr(NamePrefix.size()); | |
| Function *F = Inc->getParent()->getParent(); | |
| Module *M = F->getParent(); | |
| if (!DoHashBasedCounterSplit || !isIRPGOFlagSet(M) || | |
| !canRenameComdatFunc(*F)) { | |
| Renamed = false; | |
| return (Prefix + Name).str(); | |
| } | |
| Renamed = true; | |
| uint64_t FuncHash = Inc->getHash()->getZExtValue(); | |
| SmallVector<char, 24> HashPostfix; | |
| if (Name.ends_with((Twine(".") + Twine(FuncHash)).toStringRef(HashPostfix))) | |
| return (Prefix + Name).str(); | |
| return (Prefix + Name + "." + Twine(FuncHash)).str(); | |
| } | |
| static inline bool shouldRecordFunctionAddr(Function *F) { | |
| // Only record function addresses if IR PGO is enabled or if clang value | |
| // profiling is enabled. Recording function addresses greatly increases object | |
| // file size, because it prevents the inliner from deleting functions that | |
| // have been inlined everywhere. | |
| if (!profDataReferencedByCode(*F->getParent())) | |
| return false; | |
| // Check the linkage | |
| bool HasAvailableExternallyLinkage = F->hasAvailableExternallyLinkage(); | |
| if (!F->hasLinkOnceLinkage() && !F->hasLocalLinkage() && | |
| !HasAvailableExternallyLinkage) | |
| return true; | |
| // A function marked 'alwaysinline' with available_externally linkage can't | |
| // have its address taken. Doing so would create an undefined external ref to | |
| // the function, which would fail to link. | |
| if (HasAvailableExternallyLinkage && | |
| F->hasFnAttribute(Attribute::AlwaysInline)) | |
| return false; | |
| // Prohibit function address recording if the function is both internal and | |
| // COMDAT. This avoids the profile data variable referencing internal symbols | |
| // in COMDAT. | |
| if (F->hasLocalLinkage() && F->hasComdat()) | |
| return false; | |
| // Check uses of this function for other than direct calls or invokes to it. | |
| // Inline virtual functions have linkeOnceODR linkage. When a key method | |
| // exists, the vtable will only be emitted in the TU where the key method | |
| // is defined. In a TU where vtable is not available, the function won't | |
| // be 'addresstaken'. If its address is not recorded here, the profile data | |
| // with missing address may be picked by the linker leading to missing | |
| // indirect call target info. | |
| return F->hasAddressTaken() || F->hasLinkOnceLinkage(); | |
| } | |
| static inline bool shouldUsePublicSymbol(Function *Fn) { | |
| // It isn't legal to make an alias of this function at all | |
| if (Fn->isDeclarationForLinker()) | |
| return true; | |
| // Symbols with local linkage can just use the symbol directly without | |
| // introducing relocations | |
| if (Fn->hasLocalLinkage()) | |
| return true; | |
| // PGO + ThinLTO + CFI cause duplicate symbols to be introduced due to some | |
| // unfavorable interaction between the new alias and the alias renaming done | |
| // in LowerTypeTests under ThinLTO. For comdat functions that would normally | |
| // be deduplicated, but the renaming scheme ends up preventing renaming, since | |
| // it creates unique names for each alias, resulting in duplicated symbols. In | |
| // the future, we should update the CFI related passes to migrate these | |
| // aliases to the same module as the jump-table they refer to will be defined. | |
| if (Fn->hasMetadata(LLVMContext::MD_type)) | |
| return true; | |
| // For comdat functions, an alias would need the same linkage as the original | |
| // function and hidden visibility. There is no point in adding an alias with | |
| // identical linkage an visibility to avoid introducing symbolic relocations. | |
| if (Fn->hasComdat() && | |
| (Fn->getVisibility() == GlobalValue::VisibilityTypes::HiddenVisibility)) | |
| return true; | |
| // its OK to use an alias | |
| return false; | |
| } | |
| static inline Constant *getFuncAddrForProfData(Function *Fn) { | |
| auto *Int8PtrTy = PointerType::getUnqual(Fn->getContext()); | |
| // Store a nullptr in __llvm_profd, if we shouldn't use a real address | |
| if (!shouldRecordFunctionAddr(Fn)) | |
| return ConstantPointerNull::get(Int8PtrTy); | |
| // If we can't use an alias, we must use the public symbol, even though this | |
| // may require a symbolic relocation. | |
| if (shouldUsePublicSymbol(Fn)) | |
| return Fn; | |
| // When possible use a private alias to avoid symbolic relocations. | |
| auto *GA = GlobalAlias::create(GlobalValue::LinkageTypes::PrivateLinkage, | |
| Fn->getName() + ".local", Fn); | |
| // When the instrumented function is a COMDAT function, we cannot use a | |
| // private alias. If we did, we would create reference to a local label in | |
| // this function's section. If this version of the function isn't selected by | |
| // the linker, then the metadata would introduce a reference to a discarded | |
| // section. So, for COMDAT functions, we need to adjust the linkage of the | |
| // alias. Using hidden visibility avoids a dynamic relocation and an entry in | |
| // the dynamic symbol table. | |
| // | |
| // Note that this handles COMDAT functions with visibility other than Hidden, | |
| // since that case is covered in shouldUsePublicSymbol() | |
| if (Fn->hasComdat()) { | |
| GA->setLinkage(Fn->getLinkage()); | |
| GA->setVisibility(GlobalValue::VisibilityTypes::HiddenVisibility); | |
| } | |
| // appendToCompilerUsed(*Fn->getParent(), {GA}); | |
| return GA; | |
| } | |
| static bool needsRuntimeRegistrationOfSectionRange(const Triple &TT) { | |
| // NVPTX is an ELF target but PTX does not expose sections or linker symbols. | |
| if (TT.isNVPTX()) | |
| return true; | |
| // compiler-rt uses linker support to get data/counters/name start/end for | |
| // ELF, COFF, Mach-O, XCOFF, and Wasm. | |
| if (TT.isOSBinFormatELF() || TT.isOSBinFormatCOFF() || | |
| TT.isOSBinFormatMachO() || TT.isOSBinFormatXCOFF() || | |
| TT.isOSBinFormatWasm()) | |
| return false; | |
| return true; | |
| } | |
| void InstrLowerer::maybeSetComdat(GlobalVariable *GV, GlobalObject *GO, | |
| StringRef CounterGroupName) { | |
| // Place lowered global variables in a comdat group if the associated function | |
| // or global variable is a COMDAT. This will make sure that only one copy of | |
| // global variable (e.g. function counters) of the COMDAT function will be | |
| // emitted after linking. | |
| bool NeedComdat = needsComdatForCounter(*GO, M); | |
| bool UseComdat = (NeedComdat || TT.isOSBinFormatELF()); | |
| if (!UseComdat) | |
| return; | |
| // Keep in mind that this pass may run before the inliner, so we need to | |
| // create a new comdat group (for counters, profiling data, etc). If we use | |
| // the comdat of the parent function, that will result in relocations against | |
| // discarded sections. | |
| // | |
| // If the data variable is referenced by code, non-counter variables (notably | |
| // profiling data) and counters have to be in different comdats for COFF | |
| // because the Visual C++ linker will report duplicate symbol errors if there | |
| // are multiple external symbols with the same name marked | |
| // IMAGE_COMDAT_SELECT_ASSOCIATIVE. | |
| StringRef GroupName = TT.isOSBinFormatCOFF() && DataReferencedByCode | |
| ? GV->getName() | |
| : CounterGroupName; | |
| Comdat *C = M.getOrInsertComdat(GroupName); | |
| if (!NeedComdat) { | |
| // Object file format must be ELF since `UseComdat && !NeedComdat` is true. | |
| // | |
| // For ELF, when not using COMDAT, put counters, data and values into a | |
| // nodeduplicate COMDAT which is lowered to a zero-flag section group. This | |
| // allows -z start-stop-gc to discard the entire group when the function is | |
| // discarded. | |
| C->setSelectionKind(Comdat::NoDeduplicate); | |
| } | |
| GV->setComdat(C); | |
| // COFF doesn't allow the comdat group leader to have private linkage, so | |
| // upgrade private linkage to internal linkage to produce a symbol table | |
| // entry. | |
| if (TT.isOSBinFormatCOFF() && GV->hasPrivateLinkage()) | |
| GV->setLinkage(GlobalValue::InternalLinkage); | |
| } | |
| static inline bool shouldRecordVTableAddr(GlobalVariable *GV) { | |
| if (!profDataReferencedByCode(*GV->getParent())) | |
| return false; | |
| if (!GV->hasLinkOnceLinkage() && !GV->hasLocalLinkage() && | |
| !GV->hasAvailableExternallyLinkage()) | |
| return true; | |
| // This avoids the profile data from referencing internal symbols in | |
| // COMDAT. | |
| if (GV->hasLocalLinkage() && GV->hasComdat()) | |
| return false; | |
| return true; | |
| } | |
| // FIXME: Introduce an internal alias like what's done for functions to reduce | |
| // the number of relocation entries. | |
| static inline Constant *getVTableAddrForProfData(GlobalVariable *GV) { | |
| // Store a nullptr in __profvt_ if a real address shouldn't be used. | |
| if (!shouldRecordVTableAddr(GV)) | |
| return ConstantPointerNull::get(PointerType::getUnqual(GV->getContext())); | |
| return GV; | |
| } | |
| void InstrLowerer::getOrCreateVTableProfData(GlobalVariable *GV) { | |
| assert(ProfileCorrelate != InstrProfCorrelator::DEBUG_INFO && | |
| "Value profiling is not supported with lightweight instrumentation"); | |
| if (GV->isDeclaration() || GV->hasAvailableExternallyLinkage()) | |
| return; | |
| // Skip llvm internal global variable or __prof variables. | |
| if (GV->getName().starts_with("llvm.") || | |
| GV->getName().starts_with("__llvm") || | |
| GV->getName().starts_with("__prof")) | |
| return; | |
| // VTableProfData already created | |
| auto It = VTableDataMap.find(GV); | |
| if (It != VTableDataMap.end() && It->second) | |
| return; | |
| GlobalValue::LinkageTypes Linkage = GV->getLinkage(); | |
| GlobalValue::VisibilityTypes Visibility = GV->getVisibility(); | |
| // This is to keep consistent with per-function profile data | |
| // for correctness. | |
| if (TT.isOSBinFormatXCOFF()) { | |
| Linkage = GlobalValue::InternalLinkage; | |
| Visibility = GlobalValue::DefaultVisibility; | |
| } | |
| LLVMContext &Ctx = M.getContext(); | |
| Type *DataTypes[] = { | |
| #define INSTR_PROF_VTABLE_DATA(Type, LLVMType, Name, Init) LLVMType, | |
| #include "llvm/ProfileData/InstrProfData.inc" | |
| #undef INSTR_PROF_VTABLE_DATA | |
| }; | |
| auto *DataTy = StructType::get(Ctx, ArrayRef(DataTypes)); | |
| // Used by INSTR_PROF_VTABLE_DATA MACRO | |
| Constant *VTableAddr = getVTableAddrForProfData(GV); | |
| const std::string PGOVTableName = getPGOName(*GV); | |
| // Record the length of the vtable. This is needed since vtable pointers | |
| // loaded from C++ objects might be from the middle of a vtable definition. | |
| uint32_t VTableSizeVal = GV->getGlobalSize(M.getDataLayout()); | |
| Constant *DataVals[] = { | |
| #define INSTR_PROF_VTABLE_DATA(Type, LLVMType, Name, Init) Init, | |
| #include "llvm/ProfileData/InstrProfData.inc" | |
| #undef INSTR_PROF_VTABLE_DATA | |
| }; | |
| auto *Data = | |
| new GlobalVariable(M, DataTy, /*constant=*/false, Linkage, | |
| ConstantStruct::get(DataTy, DataVals), | |
| getInstrProfVTableVarPrefix() + PGOVTableName); | |
| Data->setVisibility(Visibility); | |
| Data->setSection(getInstrProfSectionName(IPSK_vtab, TT.getObjectFormat())); | |
| Data->setAlignment(Align(8)); | |
| maybeSetComdat(Data, GV, Data->getName()); | |
| VTableDataMap[GV] = Data; | |
| ReferencedVTables.push_back(GV); | |
| // VTable <Hash, Addr> is used by runtime but not referenced by other | |
| // sections. Conservatively mark it linker retained. | |
| UsedVars.push_back(Data); | |
| } | |
| GlobalVariable *InstrLowerer::setupProfileSection(InstrProfInstBase *Inc, | |
| InstrProfSectKind IPSK) { | |
| GlobalVariable *NamePtr = Inc->getName(); | |
| // Match the linkage and visibility of the name global. | |
| Function *Fn = Inc->getParent()->getParent(); | |
| GlobalValue::LinkageTypes Linkage = NamePtr->getLinkage(); | |
| GlobalValue::VisibilityTypes Visibility = NamePtr->getVisibility(); | |
| // Use internal rather than private linkage so the counter variable shows up | |
| // in the symbol table when using debug info for correlation. | |
| if (ProfileCorrelate == InstrProfCorrelator::DEBUG_INFO && | |
| TT.isOSBinFormatMachO() && Linkage == GlobalValue::PrivateLinkage) | |
| Linkage = GlobalValue::InternalLinkage; | |
| // Due to the limitation of binder as of 2021/09/28, the duplicate weak | |
| // symbols in the same csect won't be discarded. When there are duplicate weak | |
| // symbols, we can NOT guarantee that the relocations get resolved to the | |
| // intended weak symbol, so we can not ensure the correctness of the relative | |
| // CounterPtr, so we have to use private linkage for counter and data symbols. | |
| if (TT.isOSBinFormatXCOFF()) { | |
| Linkage = GlobalValue::PrivateLinkage; | |
| Visibility = GlobalValue::DefaultVisibility; | |
| } | |
| // Move the name variable to the right section. | |
| bool Renamed; | |
| GlobalVariable *Ptr; | |
| StringRef VarPrefix; | |
| std::string VarName; | |
| if (IPSK == IPSK_cnts) { | |
| VarPrefix = getInstrProfCountersVarPrefix(); | |
| VarName = getVarName(Inc, VarPrefix, Renamed); | |
| InstrProfCntrInstBase *CntrIncrement = dyn_cast<InstrProfCntrInstBase>(Inc); | |
| Ptr = createRegionCounters(CntrIncrement, VarName, Linkage); | |
| } else if (IPSK == IPSK_bitmap) { | |
| VarPrefix = getInstrProfBitmapVarPrefix(); | |
| VarName = getVarName(Inc, VarPrefix, Renamed); | |
| InstrProfMCDCBitmapInstBase *BitmapUpdate = | |
| dyn_cast<InstrProfMCDCBitmapInstBase>(Inc); | |
| Ptr = createRegionBitmaps(BitmapUpdate, VarName, Linkage); | |
| } else { | |
| llvm_unreachable("Profile Section must be for Counters or Bitmaps"); | |
| } | |
| Ptr->setVisibility(Visibility); | |
| // Put the counters and bitmaps in their own sections so linkers can | |
| // remove unneeded sections. | |
| Ptr->setSection(getInstrProfSectionName(IPSK, TT.getObjectFormat())); | |
| Ptr->setLinkage(Linkage); | |
| maybeSetComdat(Ptr, Fn, VarName); | |
| return Ptr; | |
| } | |
| GlobalVariable * | |
| InstrLowerer::createRegionBitmaps(InstrProfMCDCBitmapInstBase *Inc, | |
| StringRef Name, | |
| GlobalValue::LinkageTypes Linkage) { | |
| uint64_t NumBytes = Inc->getNumBitmapBytes(); | |
| auto *BitmapTy = ArrayType::get(Type::getInt8Ty(M.getContext()), NumBytes); | |
| auto GV = new GlobalVariable(M, BitmapTy, false, Linkage, | |
| Constant::getNullValue(BitmapTy), Name); | |
| GV->setAlignment(Align(1)); | |
| return GV; | |
| } | |
| GlobalVariable * | |
| InstrLowerer::getOrCreateRegionBitmaps(InstrProfMCDCBitmapInstBase *Inc) { | |
| GlobalVariable *NamePtr = Inc->getName(); | |
| auto &PD = ProfileDataMap[NamePtr]; | |
| if (PD.RegionBitmaps) | |
| return PD.RegionBitmaps; | |
| // If RegionBitmaps doesn't already exist, create it by first setting up | |
| // the corresponding profile section. | |
| auto *BitmapPtr = setupProfileSection(Inc, IPSK_bitmap); | |
| PD.RegionBitmaps = BitmapPtr; | |
| PD.NumBitmapBytes = Inc->getNumBitmapBytes(); | |
| return PD.RegionBitmaps; | |
| } | |
| GlobalVariable * | |
| InstrLowerer::createRegionCounters(InstrProfCntrInstBase *Inc, StringRef Name, | |
| GlobalValue::LinkageTypes Linkage) { | |
| uint64_t NumCounters = Inc->getNumCounters()->getZExtValue(); | |
| auto &Ctx = M.getContext(); | |
| GlobalVariable *GV; | |
| if (isa<InstrProfCoverInst>(Inc)) { | |
| auto *CounterTy = Type::getInt8Ty(Ctx); | |
| auto *CounterArrTy = ArrayType::get(CounterTy, NumCounters); | |
| // TODO: `Constant::getAllOnesValue()` does not yet accept an array type. | |
| std::vector<Constant *> InitialValues(NumCounters, | |
| Constant::getAllOnesValue(CounterTy)); | |
| GV = new GlobalVariable(M, CounterArrTy, false, Linkage, | |
| ConstantArray::get(CounterArrTy, InitialValues), | |
| Name); | |
| GV->setAlignment(Align(1)); | |
| } else { | |
| auto *CounterTy = ArrayType::get(Type::getInt64Ty(Ctx), NumCounters); | |
| GV = new GlobalVariable(M, CounterTy, false, Linkage, | |
| Constant::getNullValue(CounterTy), Name); | |
| GV->setAlignment(Align(8)); | |
| } | |
| return GV; | |
| } | |
| GlobalVariable * | |
| InstrLowerer::getOrCreateRegionCounters(InstrProfCntrInstBase *Inc) { | |
| GlobalVariable *NamePtr = Inc->getName(); | |
| auto &PD = ProfileDataMap[NamePtr]; | |
| if (PD.RegionCounters) | |
| return PD.RegionCounters; | |
| // If RegionCounters doesn't already exist, create it by first setting up | |
| // the corresponding profile section. | |
| auto *CounterPtr = setupProfileSection(Inc, IPSK_cnts); | |
| PD.RegionCounters = CounterPtr; | |
| if (ProfileCorrelate == InstrProfCorrelator::DEBUG_INFO) { | |
| LLVMContext &Ctx = M.getContext(); | |
| Function *Fn = Inc->getParent()->getParent(); | |
| if (auto *SP = Fn->getSubprogram()) { | |
| DIBuilder DB(M, true, SP->getUnit()); | |
| Metadata *FunctionNameAnnotation[] = { | |
| MDString::get(Ctx, InstrProfCorrelator::FunctionNameAttributeName), | |
| MDString::get(Ctx, getPGOFuncNameVarInitializer(NamePtr)), | |
| }; | |
| Metadata *CFGHashAnnotation[] = { | |
| MDString::get(Ctx, InstrProfCorrelator::CFGHashAttributeName), | |
| ConstantAsMetadata::get(Inc->getHash()), | |
| }; | |
| Metadata *NumCountersAnnotation[] = { | |
| MDString::get(Ctx, InstrProfCorrelator::NumCountersAttributeName), | |
| ConstantAsMetadata::get(Inc->getNumCounters()), | |
| }; | |
| auto Annotations = DB.getOrCreateArray({ | |
| MDNode::get(Ctx, FunctionNameAnnotation), | |
| MDNode::get(Ctx, CFGHashAnnotation), | |
| MDNode::get(Ctx, NumCountersAnnotation), | |
| }); | |
| auto *DICounter = DB.createGlobalVariableExpression( | |
| SP, CounterPtr->getName(), /*LinkageName=*/StringRef(), SP->getFile(), | |
| /*LineNo=*/0, DB.createUnspecifiedType("Profile Data Type"), | |
| CounterPtr->hasLocalLinkage(), /*IsDefined=*/true, /*Expr=*/nullptr, | |
| /*Decl=*/nullptr, /*TemplateParams=*/nullptr, /*AlignInBits=*/0, | |
| Annotations); | |
| CounterPtr->addDebugInfo(DICounter); | |
| DB.finalize(); | |
| } | |
| // Mark the counter variable as used so that it isn't optimized out. | |
| CompilerUsedVars.push_back(PD.RegionCounters); | |
| } | |
| // Create the data variable (if it doesn't already exist). | |
| createDataVariable(Inc); | |
| return PD.RegionCounters; | |
| } | |
| void InstrLowerer::createDataVariable(InstrProfCntrInstBase *Inc) { | |
| // When debug information is correlated to profile data, a data variable | |
| // is not needed. | |
| if (ProfileCorrelate == InstrProfCorrelator::DEBUG_INFO) | |
| return; | |
| GlobalVariable *NamePtr = Inc->getName(); | |
| auto &PD = ProfileDataMap[NamePtr]; | |
| // Return if data variable was already created. | |
| if (PD.DataVar) | |
| return; | |
| LLVMContext &Ctx = M.getContext(); | |
| Function *Fn = Inc->getParent()->getParent(); | |
| GlobalValue::LinkageTypes Linkage = NamePtr->getLinkage(); | |
| GlobalValue::VisibilityTypes Visibility = NamePtr->getVisibility(); | |
| // Due to the limitation of binder as of 2021/09/28, the duplicate weak | |
| // symbols in the same csect won't be discarded. When there are duplicate weak | |
| // symbols, we can NOT guarantee that the relocations get resolved to the | |
| // intended weak symbol, so we can not ensure the correctness of the relative | |
| // CounterPtr, so we have to use private linkage for counter and data symbols. | |
| if (TT.isOSBinFormatXCOFF()) { | |
| Linkage = GlobalValue::PrivateLinkage; | |
| Visibility = GlobalValue::DefaultVisibility; | |
| } | |
| bool NeedComdat = needsComdatForCounter(*Fn, M); | |
| bool Renamed; | |
| // The Data Variable section is anchored to profile counters. | |
| std::string CntsVarName = | |
| getVarName(Inc, getInstrProfCountersVarPrefix(), Renamed); | |
| std::string DataVarName = | |
| getVarName(Inc, getInstrProfDataVarPrefix(), Renamed); | |
| auto *Int8PtrTy = PointerType::getUnqual(Ctx); | |
| // Allocate statically the array of pointers to value profile nodes for | |
| // the current function. | |
| Constant *ValuesPtrExpr = ConstantPointerNull::get(Int8PtrTy); | |
| uint64_t NS = 0; | |
| for (uint32_t Kind = IPVK_First; Kind <= IPVK_Last; ++Kind) | |
| NS += PD.NumValueSites[Kind]; | |
| if (NS > 0 && ValueProfileStaticAlloc && | |
| !needsRuntimeRegistrationOfSectionRange(TT)) { | |
| ArrayType *ValuesTy = ArrayType::get(Type::getInt64Ty(Ctx), NS); | |
| auto *ValuesVar = new GlobalVariable( | |
| M, ValuesTy, false, Linkage, Constant::getNullValue(ValuesTy), | |
| getVarName(Inc, getInstrProfValuesVarPrefix(), Renamed)); | |
| ValuesVar->setVisibility(Visibility); | |
| setGlobalVariableLargeSection(TT, *ValuesVar); | |
| ValuesVar->setSection( | |
| getInstrProfSectionName(IPSK_vals, TT.getObjectFormat())); | |
| ValuesVar->setAlignment(Align(8)); | |
| maybeSetComdat(ValuesVar, Fn, CntsVarName); | |
| ValuesPtrExpr = ConstantExpr::getPointerBitCastOrAddrSpaceCast( | |
| ValuesVar, PointerType::get(Fn->getContext(), 0)); | |
| } | |
| uint64_t NumCounters = Inc->getNumCounters()->getZExtValue(); | |
| auto *CounterPtr = PD.RegionCounters; | |
| uint64_t NumBitmapBytes = PD.NumBitmapBytes; | |
| // Create data variable. | |
| auto *IntPtrTy = M.getDataLayout().getIntPtrType(M.getContext()); | |
| auto *Int16Ty = Type::getInt16Ty(Ctx); | |
| auto *Int16ArrayTy = ArrayType::get(Int16Ty, IPVK_Last + 1); | |
| Type *DataTypes[] = { | |
| #define INSTR_PROF_DATA(Type, LLVMType, Name, Init) LLVMType, | |
| #include "llvm/ProfileData/InstrProfData.inc" | |
| }; | |
| auto *DataTy = StructType::get(Ctx, ArrayRef(DataTypes)); | |
| Constant *FunctionAddr = getFuncAddrForProfData(Fn); | |
| Constant *Int16ArrayVals[IPVK_Last + 1]; | |
| for (uint32_t Kind = IPVK_First; Kind <= IPVK_Last; ++Kind) | |
| Int16ArrayVals[Kind] = ConstantInt::get(Int16Ty, PD.NumValueSites[Kind]); | |
| // If the data variable is not referenced by code (if we don't emit | |
| // @llvm.instrprof.value.profile, NS will be 0), and the counter keeps the | |
| // data variable live under linker GC, the data variable can be private. This | |
| // optimization applies to ELF. | |
| // | |
| // On COFF, a comdat leader cannot be local so we require DataReferencedByCode | |
| // to be false. | |
| // | |
| // If profd is in a deduplicate comdat, NS==0 with a hash suffix guarantees | |
| // that other copies must have the same CFG and cannot have value profiling. | |
| // If no hash suffix, other profd copies may be referenced by code. | |
| if (NS == 0 && !(DataReferencedByCode && NeedComdat && !Renamed) && | |
| (TT.isOSBinFormatELF() || | |
| (!DataReferencedByCode && TT.isOSBinFormatCOFF()))) { | |
| Linkage = GlobalValue::PrivateLinkage; | |
| Visibility = GlobalValue::DefaultVisibility; | |
| } | |
| // AMDGPU objects are always ET_DYN, so non-local symbols with default | |
| // visibility are preemptible. The CounterPtr label difference emits a REL32 | |
| // relocation that lld rejects against preemptible targets. | |
| if (TT.isAMDGPU() && !GlobalValue::isLocalLinkage(Linkage)) | |
| Visibility = GlobalValue::ProtectedVisibility; | |
| auto *Data = | |
| new GlobalVariable(M, DataTy, false, Linkage, nullptr, DataVarName); | |
| Constant *RelativeCounterPtr; | |
| GlobalVariable *BitmapPtr = PD.RegionBitmaps; | |
| Constant *RelativeBitmapPtr = ConstantInt::get(IntPtrTy, 0); | |
| InstrProfSectKind DataSectionKind; | |
| // With binary profile correlation, profile data is not loaded into memory. | |
| // profile data must reference profile counter with an absolute relocation. | |
| if (ProfileCorrelate == InstrProfCorrelator::BINARY) { | |
| DataSectionKind = IPSK_covdata; | |
| RelativeCounterPtr = ConstantExpr::getPtrToInt(CounterPtr, IntPtrTy); | |
| if (BitmapPtr != nullptr) | |
| RelativeBitmapPtr = ConstantExpr::getPtrToInt(BitmapPtr, IntPtrTy); | |
| } else if (TT.isNVPTX()) { | |
| // The NVPTX target cannot handle self-referencing constant expressions in | |
| // global initializers at all. Use absolute pointers and have the runtime | |
| // registration convert them to relative offsets. | |
| DataSectionKind = IPSK_data; | |
| RelativeCounterPtr = ConstantExpr::getPtrToInt(CounterPtr, IntPtrTy); | |
| } else { | |
| // Reference the counter variable with a label difference (link-time | |
| // constant). | |
| DataSectionKind = IPSK_data; | |
| RelativeCounterPtr = | |
| ConstantExpr::getSub(ConstantExpr::getPtrToInt(CounterPtr, IntPtrTy), | |
| ConstantExpr::getPtrToInt(Data, IntPtrTy)); | |
| if (BitmapPtr != nullptr) | |
| RelativeBitmapPtr = | |
| ConstantExpr::getSub(ConstantExpr::getPtrToInt(BitmapPtr, IntPtrTy), | |
| ConstantExpr::getPtrToInt(Data, IntPtrTy)); | |
| } | |
| Constant *DataVals[] = { | |
| #define INSTR_PROF_DATA(Type, LLVMType, Name, Init) Init, | |
| #include "llvm/ProfileData/InstrProfData.inc" | |
| }; | |
| Data->setInitializer(ConstantStruct::get(DataTy, DataVals)); | |
| Data->setVisibility(Visibility); | |
| Data->setSection( | |
| getInstrProfSectionName(DataSectionKind, TT.getObjectFormat())); | |
| Data->setAlignment(Align(INSTR_PROF_DATA_ALIGNMENT)); | |
| maybeSetComdat(Data, Fn, CntsVarName); | |
| PD.DataVar = Data; | |
| // Mark the data variable as used so that it isn't stripped out. | |
| CompilerUsedVars.push_back(Data); | |
| // Now that the linkage set by the FE has been passed to the data and counter | |
| // variables, reset Name variable's linkage and visibility to private so that | |
| // it can be removed later by the compiler. | |
| NamePtr->setLinkage(GlobalValue::PrivateLinkage); | |
| // Collect the referenced names to be used by emitNameData. | |
| ReferencedNames.push_back(NamePtr); | |
| } | |
| void InstrLowerer::emitVNodes() { | |
| if (!ValueProfileStaticAlloc) | |
| return; | |
| // For now only support this on platforms that do | |
| // not require runtime registration to discover | |
| // named section start/end. | |
| if (needsRuntimeRegistrationOfSectionRange(TT)) | |
| return; | |
| size_t TotalNS = 0; | |
| for (auto &PD : ProfileDataMap) { | |
| for (uint32_t Kind = IPVK_First; Kind <= IPVK_Last; ++Kind) | |
| TotalNS += PD.second.NumValueSites[Kind]; | |
| } | |
| if (!TotalNS) | |
| return; | |
| uint64_t NumCounters = TotalNS * NumCountersPerValueSite; | |
| // Heuristic for small programs with very few total value sites. | |
| // The default value of vp-counters-per-site is chosen based on | |
| // the observation that large apps usually have a low percentage | |
| // of value sites that actually have any profile data, and thus | |
| // the average number of counters per site is low. For small | |
| // apps with very few sites, this may not be true. Bump up the | |
| // number of counters in this case. | |
| #define INSTR_PROF_MIN_VAL_COUNTS 10 | |
| if (NumCounters < INSTR_PROF_MIN_VAL_COUNTS) | |
| NumCounters = std::max(INSTR_PROF_MIN_VAL_COUNTS, (int)NumCounters * 2); | |
| auto &Ctx = M.getContext(); | |
| Type *VNodeTypes[] = { | |
| #define INSTR_PROF_VALUE_NODE(Type, LLVMType, Name, Init) LLVMType, | |
| #include "llvm/ProfileData/InstrProfData.inc" | |
| }; | |
| auto *VNodeTy = StructType::get(Ctx, ArrayRef(VNodeTypes)); | |
| ArrayType *VNodesTy = ArrayType::get(VNodeTy, NumCounters); | |
| auto *VNodesVar = new GlobalVariable( | |
| M, VNodesTy, false, GlobalValue::PrivateLinkage, | |
| Constant::getNullValue(VNodesTy), getInstrProfVNodesVarName()); | |
| setGlobalVariableLargeSection(TT, *VNodesVar); | |
| VNodesVar->setSection( | |
| getInstrProfSectionName(IPSK_vnodes, TT.getObjectFormat())); | |
| VNodesVar->setAlignment(M.getDataLayout().getABITypeAlign(VNodesTy)); | |
| // VNodesVar is used by runtime but not referenced via relocation by other | |
| // sections. Conservatively make it linker retained. | |
| UsedVars.push_back(VNodesVar); | |
| } | |
| void InstrLowerer::emitNameData() { | |
| if (ReferencedNames.empty()) | |
| return; | |
| std::string CompressedNameStr; | |
| if (Error E = collectPGOFuncNameStrings(ReferencedNames, CompressedNameStr, | |
| DoInstrProfNameCompression)) { | |
| report_fatal_error(Twine(toString(std::move(E))), false); | |
| } | |
| auto &Ctx = M.getContext(); | |
| auto *NamesVal = | |
| ConstantDataArray::getString(Ctx, StringRef(CompressedNameStr), false); | |
| NamesVar = new GlobalVariable(M, NamesVal->getType(), true, | |
| GlobalValue::PrivateLinkage, NamesVal, | |
| getInstrProfNamesVarName()); | |
| NamesSize = CompressedNameStr.size(); | |
| setGlobalVariableLargeSection(TT, *NamesVar); | |
| NamesVar->setSection( | |
| ProfileCorrelate == InstrProfCorrelator::BINARY | |
| ? getInstrProfSectionName(IPSK_covname, TT.getObjectFormat()) | |
| : getInstrProfSectionName(IPSK_name, TT.getObjectFormat())); | |
| // On COFF, it's important to reduce the alignment down to 1 to prevent the | |
| // linker from inserting padding before the start of the names section or | |
| // between names entries. | |
| NamesVar->setAlignment(Align(1)); | |
| // NamesVar is used by runtime but not referenced via relocation by other | |
| // sections. Conservatively make it linker retained. | |
| UsedVars.push_back(NamesVar); | |
| for (auto *NamePtr : ReferencedNames) | |
| NamePtr->eraseFromParent(); | |
| } | |
| void InstrLowerer::emitVTableNames() { | |
| if (!EnableVTableValueProfiling || ReferencedVTables.empty()) | |
| return; | |
| // Collect the PGO names of referenced vtables and compress them. | |
| std::string CompressedVTableNames; | |
| if (Error E = collectVTableStrings(ReferencedVTables, CompressedVTableNames, | |
| DoInstrProfNameCompression)) { | |
| report_fatal_error(Twine(toString(std::move(E))), false); | |
| } | |
| auto &Ctx = M.getContext(); | |
| auto *VTableNamesVal = ConstantDataArray::getString( | |
| Ctx, StringRef(CompressedVTableNames), false /* AddNull */); | |
| GlobalVariable *VTableNamesVar = | |
| new GlobalVariable(M, VTableNamesVal->getType(), true /* constant */, | |
| GlobalValue::PrivateLinkage, VTableNamesVal, | |
| getInstrProfVTableNamesVarName()); | |
| VTableNamesVar->setSection( | |
| getInstrProfSectionName(IPSK_vname, TT.getObjectFormat())); | |
| VTableNamesVar->setAlignment(Align(1)); | |
| // Make VTableNames linker retained. | |
| UsedVars.push_back(VTableNamesVar); | |
| } | |
| void InstrLowerer::emitRegistration() { | |
| if (!needsRuntimeRegistrationOfSectionRange(TT)) | |
| return; | |
| // Construct the function. | |
| auto *VoidTy = Type::getVoidTy(M.getContext()); | |
| auto *VoidPtrTy = PointerType::getUnqual(M.getContext()); | |
| auto *Int64Ty = Type::getInt64Ty(M.getContext()); | |
| auto *RegisterFTy = FunctionType::get(VoidTy, false); | |
| auto *RegisterF = Function::Create(RegisterFTy, GlobalValue::InternalLinkage, | |
| getInstrProfRegFuncsName(), M); | |
| RegisterF->setUnnamedAddr(GlobalValue::UnnamedAddr::Global); | |
| if (Options.NoRedZone) | |
| RegisterF->addFnAttr(Attribute::NoRedZone); | |
| auto *RuntimeRegisterTy = FunctionType::get(VoidTy, VoidPtrTy, false); | |
| auto *RuntimeRegisterF = | |
| Function::Create(RuntimeRegisterTy, GlobalVariable::ExternalLinkage, | |
| getInstrProfRegFuncName(), M); | |
| IRBuilder<> IRB(BasicBlock::Create(M.getContext(), "", RegisterF)); | |
| for (Value *Data : CompilerUsedVars) | |
| if (!isa<Function>(Data)) | |
| // Check for addrspace cast when profiling GPU | |
| IRB.CreateCall(RuntimeRegisterF, | |
| IRB.CreatePointerBitCastOrAddrSpaceCast(Data, VoidPtrTy)); | |
| for (Value *Data : UsedVars) | |
| if (Data != NamesVar && !isa<Function>(Data)) | |
| IRB.CreateCall(RuntimeRegisterF, | |
| IRB.CreatePointerBitCastOrAddrSpaceCast(Data, VoidPtrTy)); | |
| if (NamesVar) { | |
| Type *ParamTypes[] = {VoidPtrTy, Int64Ty}; | |
| auto *NamesRegisterTy = | |
| FunctionType::get(VoidTy, ArrayRef(ParamTypes), false); | |
| auto *NamesRegisterF = | |
| Function::Create(NamesRegisterTy, GlobalVariable::ExternalLinkage, | |
| getInstrProfNamesRegFuncName(), M); | |
| IRB.CreateCall(NamesRegisterF, {IRB.CreatePointerBitCastOrAddrSpaceCast( | |
| NamesVar, VoidPtrTy), | |
| IRB.getInt64(NamesSize)}); | |
| } | |
| IRB.CreateRetVoid(); | |
| } | |
| bool InstrLowerer::emitRuntimeHook() { | |
| // GPU profiling data is read directly by the host offload runtime. We do not | |
| // need the standard runtime hook. | |
| if (TT.isGPU()) | |
| return false; | |
| // We expect the linker to be invoked with -u<hook_var> flag for Linux | |
| // in which case there is no need to emit the external variable. | |
| if (TT.isOSLinux() || TT.isOSAIX()) | |
| return false; | |
| // If the module's provided its own runtime, we don't need to do anything. | |
| if (M.getGlobalVariable(getInstrProfRuntimeHookVarName())) | |
| return false; | |
| // Declare an external variable that will pull in the runtime initialization. | |
| auto *Int32Ty = Type::getInt32Ty(M.getContext()); | |
| auto *Var = | |
| new GlobalVariable(M, Int32Ty, false, GlobalValue::ExternalLinkage, | |
| nullptr, getInstrProfRuntimeHookVarName()); | |
| Var->setVisibility(GlobalValue::HiddenVisibility); | |
| if (TT.isOSBinFormatELF() && !TT.isPS()) { | |
| // Mark the user variable as used so that it isn't stripped out. | |
| CompilerUsedVars.push_back(Var); | |
| } else { | |
| // Make a function that uses it. | |
| auto *User = Function::Create(FunctionType::get(Int32Ty, false), | |
| GlobalValue::LinkOnceODRLinkage, | |
| getInstrProfRuntimeHookVarUseFuncName(), M); | |
| User->addFnAttr(Attribute::NoInline); | |
| if (Options.NoRedZone) | |
| User->addFnAttr(Attribute::NoRedZone); | |
| User->setVisibility(GlobalValue::HiddenVisibility); | |
| if (TT.supportsCOMDAT()) | |
| User->setComdat(M.getOrInsertComdat(User->getName())); | |
| // Explicitly mark this function as cold since it is never called. | |
| User->setEntryCount(0); | |
| IRBuilder<> IRB(BasicBlock::Create(M.getContext(), "", User)); | |
| auto *Load = IRB.CreateLoad(Int32Ty, Var); | |
| IRB.CreateRet(Load); | |
| // Mark the function as used so that it isn't stripped out. | |
| CompilerUsedVars.push_back(User); | |
| } | |
| return true; | |
| } | |
| void InstrLowerer::emitUses() { | |
| // The metadata sections are parallel arrays. Optimizers (e.g. | |
| // GlobalOpt/ConstantMerge) may not discard associated sections as a unit, so | |
| // we conservatively retain all unconditionally in the compiler. | |
| // | |
| // On ELF and Mach-O, the linker can guarantee the associated sections will be | |
| // retained or discarded as a unit, so llvm.compiler.used is sufficient. | |
| // Similarly on COFF, if prof data is not referenced by code we use one comdat | |
| // and ensure this GC property as well. Otherwise, we have to conservatively | |
| // make all of the sections retained by the linker. | |
| if (TT.isOSBinFormatELF() || TT.isOSBinFormatMachO() || | |
| (TT.isOSBinFormatCOFF() && !DataReferencedByCode)) | |
| appendToCompilerUsed(M, CompilerUsedVars); | |
| else | |
| appendToUsed(M, CompilerUsedVars); | |
| // We do not add proper references from used metadata sections to NamesVar and | |
| // VNodesVar, so we have to be conservative and place them in llvm.used | |
| // regardless of the target, | |
| appendToUsed(M, UsedVars); | |
| } | |
| void InstrLowerer::emitInitialization() { | |
| // Create ProfileFileName variable. Don't don't this for the | |
| // context-sensitive instrumentation lowering: This lowering is after | |
| // LTO/ThinLTO linking. Pass PGOInstrumentationGenCreateVar should | |
| // have already create the variable before LTO/ThinLTO linking. | |
| if (!IsCS) | |
| createProfileFileNameVar(M, Options.InstrProfileOutput); | |
| Function *RegisterF = M.getFunction(getInstrProfRegFuncsName()); | |
| if (!RegisterF) | |
| return; | |
| // Create the initialization function. | |
| auto *VoidTy = Type::getVoidTy(M.getContext()); | |
| auto *F = Function::Create(FunctionType::get(VoidTy, false), | |
| GlobalValue::InternalLinkage, | |
| getInstrProfInitFuncName(), M); | |
| F->setUnnamedAddr(GlobalValue::UnnamedAddr::Global); | |
| F->addFnAttr(Attribute::NoInline); | |
| if (Options.NoRedZone) | |
| F->addFnAttr(Attribute::NoRedZone); | |
| // Add the basic block and the necessary calls. | |
| IRBuilder<> IRB(BasicBlock::Create(M.getContext(), "", F)); | |
| IRB.CreateCall(RegisterF, {}); | |
| IRB.CreateRetVoid(); | |
| appendToGlobalCtors(M, F, 0); | |
| } | |
| namespace llvm { | |
| // Create the variable for profile sampling. | |
| void createProfileSamplingVar(Module &M) { | |
| const StringRef VarName(INSTR_PROF_QUOTE(INSTR_PROF_PROFILE_SAMPLING_VAR)); | |
| IntegerType *SamplingVarTy; | |
| Constant *ValueZero; | |
| if (getSampledInstrumentationConfig().UseShort) { | |
| SamplingVarTy = Type::getInt16Ty(M.getContext()); | |
| ValueZero = Constant::getIntegerValue(SamplingVarTy, APInt(16, 0)); | |
| } else { | |
| SamplingVarTy = Type::getInt32Ty(M.getContext()); | |
| ValueZero = Constant::getIntegerValue(SamplingVarTy, APInt(32, 0)); | |
| } | |
| auto SamplingVar = new GlobalVariable( | |
| M, SamplingVarTy, false, GlobalValue::WeakAnyLinkage, ValueZero, VarName); | |
| SamplingVar->setVisibility(GlobalValue::DefaultVisibility); | |
| SamplingVar->setThreadLocal(true); | |
| Triple TT(M.getTargetTriple()); | |
| if (TT.supportsCOMDAT()) { | |
| SamplingVar->setLinkage(GlobalValue::ExternalLinkage); | |
| SamplingVar->setComdat(M.getOrInsertComdat(VarName)); | |
| } | |
| appendToCompilerUsed(M, SamplingVar); | |
| } | |
| } // namespace llvm |