|  | ; RUN: opt < %s -loop-vectorize -S -pass-remarks-missed='loop-vectorize' -pass-remarks-analysis='loop-vectorize' 2>&1 | FileCheck %s | 
|  |  | 
|  | ; C/C++ code for tests | 
|  | ; void test(int *A, int Length) { | 
|  | ; #pragma clang loop vectorize(enable) interleave(enable) | 
|  | ;   for (int i = 0; i < Length; i++) { | 
|  | ;     A[i] = i; | 
|  | ;     if (A[i] > Length) | 
|  | ;       break; | 
|  | ;   } | 
|  | ; } | 
|  |  | 
|  | ; void test_disabled(int *A, int Length) { | 
|  | ; #pragma clang loop vectorize(disable) interleave(disable) | 
|  | ;   for (int i = 0; i < Length; i++) | 
|  | ;     A[i] = i; | 
|  | ; } | 
|  |  | 
|  | ; void test_array_bounds(int *A, int *B, int Length) { | 
|  | ; #pragma clang loop vectorize(enable) | 
|  | ;   for (int i = 0; i < Length; i++) | 
|  | ;     A[i] = A[B[i]]; | 
|  | ; } | 
|  |  | 
|  | ; File, line, and column should match those specified in the metadata | 
|  | ; CHECK: remark: source.cpp:4:5: loop not vectorized: could not determine number of loop iterations | 
|  | ; CHECK: remark: source.cpp:4:5: loop not vectorized: use -Rpass-analysis=loop-vectorize for more info | 
|  | ; CHECK: remark: source.cpp:13:5: loop not vectorized: vectorization and interleaving are explicitly disabled, or vectorize width and interleave count are both set to 1 | 
|  | ; CHECK: remark: source.cpp:19:5: loop not vectorized: cannot identify array bounds | 
|  | ; CHECK: remark: source.cpp:19:5: loop not vectorized: use -Rpass-analysis=loop-vectorize for more info | 
|  | ; CHECK: warning: source.cpp:19:5: loop not vectorized: failed explicitly specified loop vectorization | 
|  |  | 
|  | ; CHECK: _Z4testPii | 
|  | ; CHECK-NOT: x i32> | 
|  | ; CHECK: ret | 
|  |  | 
|  | ; CHECK: _Z13test_disabledPii | 
|  | ; CHECK-NOT: x i32> | 
|  | ; CHECK: ret | 
|  |  | 
|  | ; CHECK: _Z17test_array_boundsPiS_i | 
|  | ; CHECK-NOT: x i32> | 
|  | ; CHECK: ret | 
|  |  | 
|  | target datalayout = "e-m:o-i64:64-f80:128-n8:16:32:64-S128" | 
|  |  | 
|  | ; Function Attrs: nounwind optsize ssp uwtable | 
|  | define void @_Z4testPii(i32* nocapture %A, i32 %Length) #0 !dbg !4 { | 
|  | entry: | 
|  | %cmp10 = icmp sgt i32 %Length, 0, !dbg !12 | 
|  | br i1 %cmp10, label %for.body, label %for.end, !dbg !12, !llvm.loop !14 | 
|  |  | 
|  | for.body:                                         ; preds = %entry, %for.body | 
|  | %indvars.iv = phi i64 [ %indvars.iv.next, %for.body ], [ 0, %entry ] | 
|  | %arrayidx = getelementptr inbounds i32, i32* %A, i64 %indvars.iv, !dbg !16 | 
|  | %0 = trunc i64 %indvars.iv to i32, !dbg !16 | 
|  | %ld = load i32, i32* %arrayidx, align 4 | 
|  | store i32 %0, i32* %arrayidx, align 4, !dbg !16, !tbaa !18 | 
|  | %cmp3 = icmp sle i32 %ld, %Length, !dbg !22 | 
|  | %indvars.iv.next = add nuw nsw i64 %indvars.iv, 1, !dbg !12 | 
|  | %1 = trunc i64 %indvars.iv.next to i32 | 
|  | %cmp = icmp slt i32 %1, %Length, !dbg !12 | 
|  | %or.cond = and i1 %cmp3, %cmp, !dbg !22 | 
|  | br i1 %or.cond, label %for.body, label %for.end, !dbg !22 | 
|  |  | 
|  | for.end:                                          ; preds = %for.body, %entry | 
|  | ret void, !dbg !24 | 
|  | } | 
|  |  | 
|  | ; Function Attrs: nounwind optsize ssp uwtable | 
|  | define void @_Z13test_disabledPii(i32* nocapture %A, i32 %Length) #0 !dbg !7 { | 
|  | entry: | 
|  | %cmp4 = icmp sgt i32 %Length, 0, !dbg !25 | 
|  | br i1 %cmp4, label %for.body, label %for.end, !dbg !25, !llvm.loop !27 | 
|  |  | 
|  | for.body:                                         ; preds = %entry, %for.body | 
|  | %indvars.iv = phi i64 [ %indvars.iv.next, %for.body ], [ 0, %entry ] | 
|  | %arrayidx = getelementptr inbounds i32, i32* %A, i64 %indvars.iv, !dbg !30 | 
|  | %0 = trunc i64 %indvars.iv to i32, !dbg !30 | 
|  | store i32 %0, i32* %arrayidx, align 4, !dbg !30, !tbaa !18 | 
|  | %indvars.iv.next = add nuw nsw i64 %indvars.iv, 1, !dbg !25 | 
|  | %lftr.wideiv = trunc i64 %indvars.iv.next to i32, !dbg !25 | 
|  | %exitcond = icmp eq i32 %lftr.wideiv, %Length, !dbg !25 | 
|  | br i1 %exitcond, label %for.end, label %for.body, !dbg !25, !llvm.loop !27 | 
|  |  | 
|  | for.end:                                          ; preds = %for.body, %entry | 
|  | ret void, !dbg !31 | 
|  | } | 
|  |  | 
|  | ; Function Attrs: nounwind optsize ssp uwtable | 
|  | define void @_Z17test_array_boundsPiS_i(i32* nocapture %A, i32* nocapture readonly %B, i32 %Length) #0 !dbg !8 { | 
|  | entry: | 
|  | %cmp9 = icmp sgt i32 %Length, 0, !dbg !32 | 
|  | br i1 %cmp9, label %for.body.preheader, label %for.end, !dbg !32, !llvm.loop !34 | 
|  |  | 
|  | for.body.preheader:                               ; preds = %entry | 
|  | br label %for.body, !dbg !35 | 
|  |  | 
|  | for.body:                                         ; preds = %for.body.preheader, %for.body | 
|  | %indvars.iv = phi i64 [ %indvars.iv.next, %for.body ], [ 0, %for.body.preheader ] | 
|  | %arrayidx = getelementptr inbounds i32, i32* %B, i64 %indvars.iv, !dbg !35 | 
|  | %0 = load i32, i32* %arrayidx, align 4, !dbg !35, !tbaa !18 | 
|  | %idxprom1 = sext i32 %0 to i64, !dbg !35 | 
|  | %arrayidx2 = getelementptr inbounds i32, i32* %A, i64 %idxprom1, !dbg !35 | 
|  | %1 = load i32, i32* %arrayidx2, align 4, !dbg !35, !tbaa !18 | 
|  | %arrayidx4 = getelementptr inbounds i32, i32* %A, i64 %indvars.iv, !dbg !35 | 
|  | store i32 %1, i32* %arrayidx4, align 4, !dbg !35, !tbaa !18 | 
|  | %indvars.iv.next = add nuw nsw i64 %indvars.iv, 1, !dbg !32 | 
|  | %lftr.wideiv = trunc i64 %indvars.iv.next to i32, !dbg !32 | 
|  | %exitcond = icmp eq i32 %lftr.wideiv, %Length, !dbg !32 | 
|  | br i1 %exitcond, label %for.end.loopexit, label %for.body, !dbg !32, !llvm.loop !34 | 
|  |  | 
|  | for.end.loopexit:                                 ; preds = %for.body | 
|  | br label %for.end | 
|  |  | 
|  | for.end:                                          ; preds = %for.end.loopexit, %entry | 
|  | ret void, !dbg !36 | 
|  | } | 
|  |  | 
|  | attributes #0 = { nounwind } | 
|  |  | 
|  | !llvm.dbg.cu = !{!0} | 
|  | !llvm.module.flags = !{!9, !10} | 
|  | !llvm.ident = !{!11} | 
|  |  | 
|  | !0 = distinct !DICompileUnit(language: DW_LANG_C_plus_plus, producer: "clang version 3.5.0", isOptimized: true, runtimeVersion: 6, emissionKind: LineTablesOnly, file: !1, enums: !2, retainedTypes: !2, globals: !2, imports: !2) | 
|  | !1 = !DIFile(filename: "source.cpp", directory: ".") | 
|  | !2 = !{} | 
|  | !4 = distinct !DISubprogram(name: "test", line: 1, isLocal: false, isDefinition: true, virtualIndex: 6, flags: DIFlagPrototyped, isOptimized: true, unit: !0, scopeLine: 1, file: !1, scope: !5, type: !6, variables: !2) | 
|  | !5 = !DIFile(filename: "source.cpp", directory: ".") | 
|  | !6 = !DISubroutineType(types: !2) | 
|  | !7 = distinct !DISubprogram(name: "test_disabled", line: 10, isLocal: false, isDefinition: true, virtualIndex: 6, flags: DIFlagPrototyped, isOptimized: true, unit: !0, scopeLine: 10, file: !1, scope: !5, type: !6, variables: !2) | 
|  | !8 = distinct !DISubprogram(name: "test_array_bounds", line: 16, isLocal: false, isDefinition: true, virtualIndex: 6, flags: DIFlagPrototyped, isOptimized: true, unit: !0, scopeLine: 16, file: !1, scope: !5, type: !6, variables: !2) | 
|  | !9 = !{i32 2, !"Dwarf Version", i32 2} | 
|  | !10 = !{i32 2, !"Debug Info Version", i32 3} | 
|  | !11 = !{!"clang version 3.5.0"} | 
|  | !12 = !DILocation(line: 3, column: 8, scope: !13) | 
|  | !13 = distinct !DILexicalBlock(line: 3, column: 3, file: !1, scope: !4) | 
|  | !14 = !{!14, !15, !15} | 
|  | !15 = !{!"llvm.loop.vectorize.enable", i1 true} | 
|  | !16 = !DILocation(line: 4, column: 5, scope: !17) | 
|  | !17 = distinct !DILexicalBlock(line: 3, column: 36, file: !1, scope: !13) | 
|  | !18 = !{!19, !19, i64 0} | 
|  | !19 = !{!"int", !20, i64 0} | 
|  | !20 = !{!"omnipotent char", !21, i64 0} | 
|  | !21 = !{!"Simple C/C++ TBAA"} | 
|  | !22 = !DILocation(line: 5, column: 9, scope: !23) | 
|  | !23 = distinct !DILexicalBlock(line: 5, column: 9, file: !1, scope: !17) | 
|  | !24 = !DILocation(line: 8, column: 1, scope: !4) | 
|  | !25 = !DILocation(line: 12, column: 8, scope: !26) | 
|  | !26 = distinct !DILexicalBlock(line: 12, column: 3, file: !1, scope: !7) | 
|  | !27 = !{!27, !28, !29} | 
|  | !28 = !{!"llvm.loop.interleave.count", i32 1} | 
|  | !29 = !{!"llvm.loop.vectorize.width", i32 1} | 
|  | !30 = !DILocation(line: 13, column: 5, scope: !26) | 
|  | !31 = !DILocation(line: 14, column: 1, scope: !7) | 
|  | !32 = !DILocation(line: 18, column: 8, scope: !33) | 
|  | !33 = distinct !DILexicalBlock(line: 18, column: 3, file: !1, scope: !8) | 
|  | !34 = !{!34, !15} | 
|  | !35 = !DILocation(line: 19, column: 5, scope: !33) | 
|  | !36 = !DILocation(line: 20, column: 1, scope: !8) |