| //===- VPlanRecipes.cpp - Implementations for VPlan recipes ---------------===// | |
| // | |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. | |
| // See https://llvm.org/LICENSE.txt for license information. | |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception | |
| // | |
| //===----------------------------------------------------------------------===// | |
| /// | |
| /// \file | |
| /// This file contains implementations for different VPlan recipes. | |
| /// | |
| //===----------------------------------------------------------------------===// | |
| #include "LoopVectorizationPlanner.h" | |
| #include "VPlan.h" | |
| #include "VPlanAnalysis.h" | |
| #include "VPlanHelpers.h" | |
| #include "VPlanPatternMatch.h" | |
| #include "VPlanUtils.h" | |
| #include "llvm/ADT/STLExtras.h" | |
| #include "llvm/ADT/SmallVector.h" | |
| #include "llvm/ADT/SmallVectorExtras.h" | |
| #include "llvm/ADT/Twine.h" | |
| #include "llvm/Analysis/AssumptionCache.h" | |
| #include "llvm/Analysis/IVDescriptors.h" | |
| #include "llvm/Analysis/LoopInfo.h" | |
| #include "llvm/Analysis/ScalarEvolutionExpressions.h" | |
| #include "llvm/IR/BasicBlock.h" | |
| #include "llvm/IR/IRBuilder.h" | |
| #include "llvm/IR/Instruction.h" | |
| #include "llvm/IR/Instructions.h" | |
| #include "llvm/IR/Intrinsics.h" | |
| #include "llvm/IR/Type.h" | |
| #include "llvm/IR/Value.h" | |
| #include "llvm/Support/Casting.h" | |
| #include "llvm/Support/CommandLine.h" | |
| #include "llvm/Support/Debug.h" | |
| #include "llvm/Support/raw_ostream.h" | |
| #include "llvm/Transforms/Utils/BasicBlockUtils.h" | |
| #include "llvm/Transforms/Utils/LoopUtils.h" | |
| #include <cassert> | |
| using namespace llvm; | |
| using namespace llvm::VPlanPatternMatch; | |
| using VectorParts = SmallVector<Value *, 2>; | |
| #define LV_NAME "loop-vectorize" | |
| #define DEBUG_TYPE LV_NAME | |
| bool VPRecipeBase::mayWriteToMemory() const { | |
| switch (getVPRecipeID()) { | |
| case VPExpressionSC: | |
| return cast<VPExpressionRecipe>(this)->mayReadOrWriteMemory(); | |
| case VPInstructionSC: { | |
| auto *VPI = cast<VPInstruction>(this); | |
| // Loads read from memory but don't write to memory. | |
| if (VPI->getOpcode() == Instruction::Load) | |
| return false; | |
| return VPI->opcodeMayReadOrWriteFromMemory(); | |
| } | |
| case VPInterleaveEVLSC: | |
| case VPInterleaveSC: | |
| return cast<VPInterleaveBase>(this)->getNumStoreOperands() > 0; | |
| case VPWidenStoreEVLSC: | |
| case VPWidenStoreSC: | |
| return true; | |
| case VPReplicateSC: | |
| return cast<Instruction>(getVPSingleValue()->getUnderlyingValue()) | |
| ->mayWriteToMemory(); | |
| case VPWidenCallSC: | |
| return !cast<VPWidenCallRecipe>(this) | |
| ->getCalledScalarFunction() | |
| ->onlyReadsMemory(); | |
| case VPWidenIntrinsicSC: | |
| return cast<VPWidenIntrinsicRecipe>(this)->mayWriteToMemory(); | |
| case VPActiveLaneMaskPHISC: | |
| case VPCurrentIterationPHISC: | |
| case VPBranchOnMaskSC: | |
| case VPDerivedIVSC: | |
| case VPFirstOrderRecurrencePHISC: | |
| case VPReductionPHISC: | |
| case VPScalarIVStepsSC: | |
| case VPPredInstPHISC: | |
| return false; | |
| case VPBlendSC: | |
| case VPReductionEVLSC: | |
| case VPReductionSC: | |
| case VPVectorPointerSC: | |
| case VPWidenCanonicalIVSC: | |
| case VPWidenCastSC: | |
| case VPWidenGEPSC: | |
| case VPWidenIntOrFpInductionSC: | |
| case VPWidenLoadEVLSC: | |
| case VPWidenLoadSC: | |
| case VPWidenPHISC: | |
| case VPWidenPointerInductionSC: | |
| case VPWidenSC: { | |
| const Instruction *I = | |
| dyn_cast_or_null<Instruction>(getVPSingleValue()->getUnderlyingValue()); | |
| (void)I; | |
| assert((!I || !I->mayWriteToMemory()) && | |
| "underlying instruction may write to memory"); | |
| return false; | |
| } | |
| default: | |
| return true; | |
| } | |
| } | |
| bool VPRecipeBase::mayReadFromMemory() const { | |
| switch (getVPRecipeID()) { | |
| case VPExpressionSC: | |
| return cast<VPExpressionRecipe>(this)->mayReadOrWriteMemory(); | |
| case VPInstructionSC: | |
| return cast<VPInstruction>(this)->opcodeMayReadOrWriteFromMemory(); | |
| case VPWidenLoadEVLSC: | |
| case VPWidenLoadSC: | |
| return true; | |
| case VPReplicateSC: | |
| return cast<Instruction>(getVPSingleValue()->getUnderlyingValue()) | |
| ->mayReadFromMemory(); | |
| case VPWidenCallSC: | |
| return !cast<VPWidenCallRecipe>(this) | |
| ->getCalledScalarFunction() | |
| ->onlyWritesMemory(); | |
| case VPWidenIntrinsicSC: | |
| return cast<VPWidenIntrinsicRecipe>(this)->mayReadFromMemory(); | |
| case VPBranchOnMaskSC: | |
| case VPDerivedIVSC: | |
| case VPCurrentIterationPHISC: | |
| case VPFirstOrderRecurrencePHISC: | |
| case VPReductionPHISC: | |
| case VPPredInstPHISC: | |
| case VPScalarIVStepsSC: | |
| case VPWidenStoreEVLSC: | |
| case VPWidenStoreSC: | |
| return false; | |
| case VPBlendSC: | |
| case VPReductionEVLSC: | |
| case VPReductionSC: | |
| case VPVectorPointerSC: | |
| case VPWidenCanonicalIVSC: | |
| case VPWidenCastSC: | |
| case VPWidenGEPSC: | |
| case VPWidenIntOrFpInductionSC: | |
| case VPWidenPHISC: | |
| case VPWidenPointerInductionSC: | |
| case VPWidenSC: { | |
| const Instruction *I = | |
| dyn_cast_or_null<Instruction>(getVPSingleValue()->getUnderlyingValue()); | |
| (void)I; | |
| assert((!I || !I->mayReadFromMemory()) && | |
| "underlying instruction may read from memory"); | |
| return false; | |
| } | |
| default: | |
| // FIXME: Return false if the recipe represents an interleaved store. | |
| return true; | |
| } | |
| } | |
| bool VPRecipeBase::mayHaveSideEffects() const { | |
| switch (getVPRecipeID()) { | |
| case VPExpressionSC: | |
| return cast<VPExpressionRecipe>(this)->mayHaveSideEffects(); | |
| case VPActiveLaneMaskPHISC: | |
| case VPDerivedIVSC: | |
| case VPCurrentIterationPHISC: | |
| case VPFirstOrderRecurrencePHISC: | |
| case VPReductionPHISC: | |
| case VPPredInstPHISC: | |
| case VPVectorEndPointerSC: | |
| return false; | |
| case VPInstructionSC: { | |
| auto *VPI = cast<VPInstruction>(this); | |
| return mayWriteToMemory() || | |
| VPI->getOpcode() == VPInstruction::BranchOnCount || | |
| VPI->getOpcode() == VPInstruction::BranchOnCond || | |
| VPI->getOpcode() == VPInstruction::BranchOnTwoConds; | |
| } | |
| case VPWidenCallSC: { | |
| Function *Fn = cast<VPWidenCallRecipe>(this)->getCalledScalarFunction(); | |
| return mayWriteToMemory() || !Fn->doesNotThrow() || !Fn->willReturn(); | |
| } | |
| case VPWidenIntrinsicSC: | |
| return cast<VPWidenIntrinsicRecipe>(this)->mayHaveSideEffects(); | |
| case VPBlendSC: | |
| case VPReductionEVLSC: | |
| case VPReductionSC: | |
| case VPScalarIVStepsSC: | |
| case VPVectorPointerSC: | |
| case VPWidenCanonicalIVSC: | |
| case VPWidenCastSC: | |
| case VPWidenGEPSC: | |
| case VPWidenIntOrFpInductionSC: | |
| case VPWidenPHISC: | |
| case VPWidenPointerInductionSC: | |
| case VPWidenSC: { | |
| const Instruction *I = | |
| dyn_cast_or_null<Instruction>(getVPSingleValue()->getUnderlyingValue()); | |
| (void)I; | |
| assert((!I || !I->mayHaveSideEffects()) && | |
| "underlying instruction has side-effects"); | |
| return false; | |
| } | |
| case VPInterleaveEVLSC: | |
| case VPInterleaveSC: | |
| return mayWriteToMemory(); | |
| case VPWidenLoadEVLSC: | |
| case VPWidenLoadSC: | |
| case VPWidenStoreEVLSC: | |
| case VPWidenStoreSC: | |
| assert( | |
| cast<VPWidenMemoryRecipe>(this)->getIngredient().mayHaveSideEffects() == | |
| mayWriteToMemory() && | |
| "mayHaveSideffects result for ingredient differs from this " | |
| "implementation"); | |
| return mayWriteToMemory(); | |
| case VPReplicateSC: { | |
| auto *R = cast<VPReplicateRecipe>(this); | |
| return R->getUnderlyingInstr()->mayHaveSideEffects(); | |
| } | |
| default: | |
| return true; | |
| } | |
| } | |
| bool VPRecipeBase::isSafeToSpeculativelyExecute() const { | |
| switch (getVPRecipeID()) { | |
| default: | |
| return false; | |
| case VPInstructionSC: { | |
| unsigned Opcode = cast<VPInstruction>(this)->getOpcode(); | |
| if (Instruction::isCast(Opcode)) | |
| return true; | |
| switch (Opcode) { | |
| default: | |
| return false; | |
| case Instruction::Add: | |
| case Instruction::Sub: | |
| case Instruction::Mul: | |
| case Instruction::GetElementPtr: | |
| return true; | |
| } | |
| } | |
| } | |
| } | |
| void VPRecipeBase::insertBefore(VPRecipeBase *InsertPos) { | |
| assert(!Parent && "Recipe already in some VPBasicBlock"); | |
| assert(InsertPos->getParent() && | |
| "Insertion position not in any VPBasicBlock"); | |
| InsertPos->getParent()->insert(this, InsertPos->getIterator()); | |
| } | |
| void VPRecipeBase::insertBefore(VPBasicBlock &BB, | |
| iplist<VPRecipeBase>::iterator I) { | |
| assert(!Parent && "Recipe already in some VPBasicBlock"); | |
| assert(I == BB.end() || I->getParent() == &BB); | |
| BB.insert(this, I); | |
| } | |
| void VPRecipeBase::insertAfter(VPRecipeBase *InsertPos) { | |
| assert(!Parent && "Recipe already in some VPBasicBlock"); | |
| assert(InsertPos->getParent() && | |
| "Insertion position not in any VPBasicBlock"); | |
| InsertPos->getParent()->insert(this, std::next(InsertPos->getIterator())); | |
| } | |
| void VPRecipeBase::removeFromParent() { | |
| assert(getParent() && "Recipe not in any VPBasicBlock"); | |
| getParent()->getRecipeList().remove(getIterator()); | |
| Parent = nullptr; | |
| } | |
| iplist<VPRecipeBase>::iterator VPRecipeBase::eraseFromParent() { | |
| assert(getParent() && "Recipe not in any VPBasicBlock"); | |
| return getParent()->getRecipeList().erase(getIterator()); | |
| } | |
| void VPRecipeBase::moveAfter(VPRecipeBase *InsertPos) { | |
| removeFromParent(); | |
| insertAfter(InsertPos); | |
| } | |
| void VPRecipeBase::moveBefore(VPBasicBlock &BB, | |
| iplist<VPRecipeBase>::iterator I) { | |
| removeFromParent(); | |
| insertBefore(BB, I); | |
| } | |
| InstructionCost VPRecipeBase::cost(ElementCount VF, VPCostContext &Ctx) { | |
| // Get the underlying instruction for the recipe, if there is one. It is used | |
| // to | |
| // * decide if cost computation should be skipped for this recipe, | |
| // * apply forced target instruction cost. | |
| Instruction *UI = nullptr; | |
| if (auto *S = dyn_cast<VPSingleDefRecipe>(this)) | |
| UI = dyn_cast_or_null<Instruction>(S->getUnderlyingValue()); | |
| else if (auto *IG = dyn_cast<VPInterleaveBase>(this)) | |
| UI = IG->getInsertPos(); | |
| else if (auto *WidenMem = dyn_cast<VPWidenMemoryRecipe>(this)) | |
| UI = &WidenMem->getIngredient(); | |
| InstructionCost RecipeCost; | |
| if (UI && Ctx.skipCostComputation(UI, VF.isVector())) { | |
| RecipeCost = 0; | |
| } else { | |
| RecipeCost = computeCost(VF, Ctx); | |
| if (ForceTargetInstructionCost.getNumOccurrences() > 0 && | |
| RecipeCost.isValid()) { | |
| if (UI) | |
| RecipeCost = InstructionCost(ForceTargetInstructionCost); | |
| else | |
| RecipeCost = InstructionCost(0); | |
| } | |
| } | |
| LLVM_DEBUG({ | |
| dbgs() << "Cost of " << RecipeCost << " for VF " << VF << ": "; | |
| dump(); | |
| }); | |
| return RecipeCost; | |
| } | |
| InstructionCost VPRecipeBase::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| llvm_unreachable("subclasses should implement computeCost"); | |
| } | |
| bool VPRecipeBase::isPhi() const { | |
| return (getVPRecipeID() >= VPFirstPHISC && getVPRecipeID() <= VPLastPHISC) || | |
| isa<VPPhi, VPIRPhi>(this); | |
| } | |
| bool VPRecipeBase::isScalarCast() const { | |
| auto *VPI = dyn_cast<VPInstruction>(this); | |
| return VPI && Instruction::isCast(VPI->getOpcode()); | |
| } | |
| void VPIRFlags::intersectFlags(const VPIRFlags &Other) { | |
| assert(OpType == Other.OpType && "OpType must match"); | |
| switch (OpType) { | |
| case OperationType::OverflowingBinOp: | |
| WrapFlags.HasNUW &= Other.WrapFlags.HasNUW; | |
| WrapFlags.HasNSW &= Other.WrapFlags.HasNSW; | |
| break; | |
| case OperationType::Trunc: | |
| TruncFlags.HasNUW &= Other.TruncFlags.HasNUW; | |
| TruncFlags.HasNSW &= Other.TruncFlags.HasNSW; | |
| break; | |
| case OperationType::DisjointOp: | |
| DisjointFlags.IsDisjoint &= Other.DisjointFlags.IsDisjoint; | |
| break; | |
| case OperationType::PossiblyExactOp: | |
| ExactFlags.IsExact &= Other.ExactFlags.IsExact; | |
| break; | |
| case OperationType::GEPOp: | |
| GEPFlagsStorage &= Other.GEPFlagsStorage; | |
| break; | |
| case OperationType::FPMathOp: | |
| case OperationType::FCmp: | |
| assert((OpType != OperationType::FCmp || | |
| FCmpFlags.CmpPredStorage == Other.FCmpFlags.CmpPredStorage) && | |
| "Cannot drop CmpPredicate"); | |
| getFMFsRef().NoNaNs &= Other.getFMFsRef().NoNaNs; | |
| getFMFsRef().NoInfs &= Other.getFMFsRef().NoInfs; | |
| break; | |
| case OperationType::NonNegOp: | |
| NonNegFlags.NonNeg &= Other.NonNegFlags.NonNeg; | |
| break; | |
| case OperationType::Cmp: | |
| assert(CmpPredStorage == Other.CmpPredStorage && | |
| "Cannot drop CmpPredicate"); | |
| break; | |
| case OperationType::ReductionOp: | |
| assert(ReductionFlags.Kind == Other.ReductionFlags.Kind && | |
| "Cannot change RecurKind"); | |
| assert(ReductionFlags.IsOrdered == Other.ReductionFlags.IsOrdered && | |
| "Cannot change IsOrdered"); | |
| assert(ReductionFlags.IsInLoop == Other.ReductionFlags.IsInLoop && | |
| "Cannot change IsInLoop"); | |
| getFMFsRef().NoNaNs &= Other.getFMFsRef().NoNaNs; | |
| getFMFsRef().NoInfs &= Other.getFMFsRef().NoInfs; | |
| break; | |
| case OperationType::Other: | |
| break; | |
| } | |
| } | |
| FastMathFlags VPIRFlags::getFastMathFlags() const { | |
| assert((OpType == OperationType::FPMathOp || OpType == OperationType::FCmp || | |
| OpType == OperationType::ReductionOp || | |
| OpType == OperationType::Other) && | |
| "recipe doesn't have fast math flags"); | |
| if (OpType == OperationType::Other) | |
| return FastMathFlags(); | |
| const FastMathFlagsTy &F = getFMFsRef(); | |
| FastMathFlags Res; | |
| Res.setAllowReassoc(F.AllowReassoc); | |
| Res.setNoNaNs(F.NoNaNs); | |
| Res.setNoInfs(F.NoInfs); | |
| Res.setNoSignedZeros(F.NoSignedZeros); | |
| Res.setAllowReciprocal(F.AllowReciprocal); | |
| Res.setAllowContract(F.AllowContract); | |
| Res.setApproxFunc(F.ApproxFunc); | |
| return Res; | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPSingleDefRecipe::dump() const { VPRecipeBase::dump(); } | |
| void VPRecipeBase::print(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| printRecipe(O, Indent, SlotTracker); | |
| if (auto DL = getDebugLoc()) { | |
| O << ", !dbg "; | |
| DL.print(O); | |
| } | |
| if (auto *Metadata = dyn_cast<VPIRMetadata>(this)) | |
| Metadata->print(O, SlotTracker); | |
| } | |
| #endif | |
| template <unsigned PartOpIdx> | |
| VPValue * | |
| VPUnrollPartAccessor<PartOpIdx>::getUnrollPartOperand(const VPUser &U) const { | |
| if (U.getNumOperands() == PartOpIdx + 1) | |
| return U.getOperand(PartOpIdx); | |
| return nullptr; | |
| } | |
| template <unsigned PartOpIdx> | |
| unsigned VPUnrollPartAccessor<PartOpIdx>::getUnrollPart(const VPUser &U) const { | |
| if (auto *UnrollPartOp = getUnrollPartOperand(U)) | |
| return cast<VPConstantInt>(UnrollPartOp)->getZExtValue(); | |
| return 0; | |
| } | |
| namespace llvm { | |
| template class VPUnrollPartAccessor<1>; | |
| template class VPUnrollPartAccessor<2>; | |
| template class VPUnrollPartAccessor<3>; | |
| } | |
| VPInstruction::VPInstruction(unsigned Opcode, ArrayRef<VPValue *> Operands, | |
| const VPIRFlags &Flags, const VPIRMetadata &MD, | |
| DebugLoc DL, const Twine &Name) | |
| : VPRecipeWithIRFlags(VPRecipeBase::VPInstructionSC, Operands, Flags, DL), | |
| VPIRMetadata(MD), Opcode(Opcode), Name(Name.str()) { | |
| assert(flagsValidForOpcode(getOpcode()) && | |
| "Set flags not supported for the provided opcode"); | |
| assert(hasRequiredFlagsForOpcode(getOpcode()) && | |
| "Opcode requires specific flags to be set"); | |
| assert((getNumOperandsForOpcode() == -1u || | |
| getNumOperandsForOpcode() == getNumOperands() || | |
| (isMasked() && getNumOperandsForOpcode() + 1 == getNumOperands())) && | |
| "number of operands does not match opcode"); | |
| } | |
| /// For call VPInstructions, return the operand index of the called function. | |
| /// The function is either the last operand (for unmasked calls) or the | |
| /// second-to-last operand (for masked calls). | |
| static unsigned getCalledFnOperandIndex(const VPInstruction &VPI) { | |
| assert(VPI.getOpcode() == Instruction::Call && "must be a call"); | |
| unsigned NumOps = VPI.getNumOperands(); | |
| auto *LastOp = dyn_cast<VPIRValue>(VPI.getOperand(NumOps - 1)); | |
| if (LastOp && isa<Function>(LastOp->getValue())) | |
| return NumOps - 1; | |
| assert( | |
| isa<Function>(cast<VPIRValue>(VPI.getOperand(NumOps - 2))->getValue()) && | |
| "expected function operand"); | |
| return NumOps - 2; | |
| } | |
| /// For call VPInstructions, return the called function. | |
| static Function *getCalledFunction(const VPInstruction &VPI) { | |
| unsigned Idx = getCalledFnOperandIndex(VPI); | |
| return cast<Function>(cast<VPIRValue>(VPI.getOperand(Idx))->getValue()); | |
| } | |
| unsigned VPInstruction::getNumOperandsForOpcode() const { | |
| if (Instruction::isUnaryOp(Opcode) || Instruction::isCast(Opcode)) | |
| return 1; | |
| if (Instruction::isBinaryOp(Opcode)) | |
| return 2; | |
| switch (Opcode) { | |
| case VPInstruction::StepVector: | |
| case VPInstruction::VScale: | |
| return 0; | |
| case Instruction::Alloca: | |
| case Instruction::ExtractValue: | |
| case Instruction::Freeze: | |
| case Instruction::Load: | |
| case VPInstruction::BranchOnCond: | |
| case VPInstruction::Broadcast: | |
| case VPInstruction::ExitingIVValue: | |
| case VPInstruction::ExplicitVectorLength: | |
| case VPInstruction::ExtractLastLane: | |
| case VPInstruction::ExtractLastPart: | |
| case VPInstruction::ExtractPenultimateElement: | |
| case VPInstruction::MaskedCond: | |
| case VPInstruction::Not: | |
| case VPInstruction::ResumeForEpilogue: | |
| case VPInstruction::Reverse: | |
| case VPInstruction::Unpack: | |
| return 1; | |
| case Instruction::ICmp: | |
| case Instruction::FCmp: | |
| case Instruction::ExtractElement: | |
| case Instruction::Store: | |
| case VPInstruction::BranchOnCount: | |
| case VPInstruction::BranchOnTwoConds: | |
| case VPInstruction::FirstOrderRecurrenceSplice: | |
| case VPInstruction::LogicalAnd: | |
| case VPInstruction::LogicalOr: | |
| case VPInstruction::PtrAdd: | |
| case VPInstruction::WidePtrAdd: | |
| case VPInstruction::WideIVStep: | |
| case VPInstruction::CalculateTripCountMinusVF: | |
| return 2; | |
| case Instruction::InsertElement: | |
| case Instruction::Select: | |
| case VPInstruction::ActiveLaneMask: | |
| case VPInstruction::ReductionStartVector: | |
| return 3; | |
| case Instruction::Call: | |
| return getCalledFnOperandIndex(*this) + 1; | |
| case Instruction::GetElementPtr: | |
| case Instruction::PHI: | |
| case Instruction::Switch: | |
| case VPInstruction::AnyOf: | |
| case VPInstruction::BuildStructVector: | |
| case VPInstruction::BuildVector: | |
| case VPInstruction::CanonicalIVIncrementForPart: | |
| case VPInstruction::ComputeReductionResult: | |
| case VPInstruction::FirstActiveLane: | |
| case VPInstruction::LastActiveLane: | |
| case VPInstruction::ExtractLane: | |
| case VPInstruction::ExtractLastActive: | |
| // Cannot determine the number of operands from the opcode. | |
| return -1u; | |
| } | |
| llvm_unreachable("all cases should be handled above"); | |
| } | |
| bool VPInstruction::doesGeneratePerAllLanes() const { | |
| return Opcode == VPInstruction::PtrAdd && !vputils::onlyFirstLaneUsed(this); | |
| } | |
| bool VPInstruction::canGenerateScalarForFirstLane() const { | |
| if (Instruction::isBinaryOp(getOpcode()) || Instruction::isCast(getOpcode())) | |
| return true; | |
| if (isSingleScalar() || isVectorToScalar()) | |
| return true; | |
| switch (Opcode) { | |
| case Instruction::Freeze: | |
| case Instruction::ICmp: | |
| case Instruction::PHI: | |
| case Instruction::Select: | |
| case VPInstruction::BranchOnCond: | |
| case VPInstruction::BranchOnTwoConds: | |
| case VPInstruction::BranchOnCount: | |
| case VPInstruction::CalculateTripCountMinusVF: | |
| case VPInstruction::CanonicalIVIncrementForPart: | |
| case VPInstruction::PtrAdd: | |
| case VPInstruction::ExplicitVectorLength: | |
| case VPInstruction::AnyOf: | |
| case VPInstruction::Not: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| } | |
| Value *VPInstruction::generate(VPTransformState &State) { | |
| IRBuilderBase &Builder = State.Builder; | |
| if (Instruction::isBinaryOp(getOpcode())) { | |
| bool OnlyFirstLaneUsed = vputils::onlyFirstLaneUsed(this); | |
| Value *A = State.get(getOperand(0), OnlyFirstLaneUsed); | |
| Value *B = State.get(getOperand(1), OnlyFirstLaneUsed); | |
| auto *Res = | |
| Builder.CreateBinOp((Instruction::BinaryOps)getOpcode(), A, B, Name); | |
| if (auto *I = dyn_cast<Instruction>(Res)) | |
| applyFlags(*I); | |
| return Res; | |
| } | |
| switch (getOpcode()) { | |
| case VPInstruction::Not: { | |
| bool OnlyFirstLaneUsed = vputils::onlyFirstLaneUsed(this); | |
| Value *A = State.get(getOperand(0), OnlyFirstLaneUsed); | |
| return Builder.CreateNot(A, Name); | |
| } | |
| case Instruction::ExtractElement: { | |
| assert(State.VF.isVector() && "Only extract elements from vectors"); | |
| if (auto *Idx = dyn_cast<VPConstantInt>(getOperand(1))) | |
| return State.get(getOperand(0), VPLane(Idx->getZExtValue())); | |
| Value *Vec = State.get(getOperand(0)); | |
| Value *Idx = State.get(getOperand(1), /*IsScalar=*/true); | |
| return Builder.CreateExtractElement(Vec, Idx, Name); | |
| } | |
| case Instruction::InsertElement: { | |
| assert(State.VF.isVector() && "Can only insert elements into vectors"); | |
| Value *Vec = State.get(getOperand(0), /*IsScalar=*/false); | |
| Value *Elt = State.get(getOperand(1), /*IsScalar=*/true); | |
| Value *Idx = State.get(getOperand(2), /*IsScalar=*/true); | |
| return Builder.CreateInsertElement(Vec, Elt, Idx, Name); | |
| } | |
| case Instruction::Freeze: { | |
| Value *Op = State.get(getOperand(0), vputils::onlyFirstLaneUsed(this)); | |
| return Builder.CreateFreeze(Op, Name); | |
| } | |
| case Instruction::FCmp: | |
| case Instruction::ICmp: { | |
| bool OnlyFirstLaneUsed = vputils::onlyFirstLaneUsed(this); | |
| Value *A = State.get(getOperand(0), OnlyFirstLaneUsed); | |
| Value *B = State.get(getOperand(1), OnlyFirstLaneUsed); | |
| return Builder.CreateCmp(getPredicate(), A, B, Name); | |
| } | |
| case Instruction::PHI: { | |
| llvm_unreachable("should be handled by VPPhi::execute"); | |
| } | |
| case Instruction::Select: { | |
| bool OnlyFirstLaneUsed = vputils::onlyFirstLaneUsed(this); | |
| Value *Cond = | |
| State.get(getOperand(0), | |
| OnlyFirstLaneUsed || vputils::isSingleScalar(getOperand(0))); | |
| Value *Op1 = State.get(getOperand(1), OnlyFirstLaneUsed); | |
| Value *Op2 = State.get(getOperand(2), OnlyFirstLaneUsed); | |
| return Builder.CreateSelectFMF(Cond, Op1, Op2, getFastMathFlags(), Name); | |
| } | |
| case VPInstruction::ActiveLaneMask: { | |
| // Get first lane of vector induction variable. | |
| Value *VIVElem0 = State.get(getOperand(0), VPLane(0)); | |
| // Get the original loop tripcount. | |
| Value *ScalarTC = State.get(getOperand(1), VPLane(0)); | |
| // If this part of the active lane mask is scalar, generate the CMP directly | |
| // to avoid unnecessary extracts. | |
| if (State.VF.isScalar()) | |
| return Builder.CreateCmp(CmpInst::Predicate::ICMP_ULT, VIVElem0, ScalarTC, | |
| Name); | |
| ElementCount EC = State.VF.multiplyCoefficientBy( | |
| cast<VPConstantInt>(getOperand(2))->getZExtValue()); | |
| auto *PredTy = VectorType::get(Builder.getInt1Ty(), EC); | |
| return Builder.CreateIntrinsic(Intrinsic::get_active_lane_mask, | |
| {PredTy, ScalarTC->getType()}, | |
| {VIVElem0, ScalarTC}, nullptr, Name); | |
| } | |
| case VPInstruction::FirstOrderRecurrenceSplice: { | |
| // Generate code to combine the previous and current values in vector v3. | |
| // | |
| // vector.ph: | |
| // v_init = vector(..., ..., ..., a[-1]) | |
| // br vector.body | |
| // | |
| // vector.body | |
| // i = phi [0, vector.ph], [i+4, vector.body] | |
| // v1 = phi [v_init, vector.ph], [v2, vector.body] | |
| // v2 = a[i, i+1, i+2, i+3]; | |
| // v3 = vector(v1(3), v2(0, 1, 2)) | |
| auto *V1 = State.get(getOperand(0)); | |
| if (!V1->getType()->isVectorTy()) | |
| return V1; | |
| Value *V2 = State.get(getOperand(1)); | |
| return Builder.CreateVectorSpliceRight(V1, V2, 1, Name); | |
| } | |
| case VPInstruction::CalculateTripCountMinusVF: { | |
| Value *ScalarTC = State.get(getOperand(0), VPLane(0)); | |
| Value *VFxUF = State.get(getOperand(1), VPLane(0)); | |
| Value *Sub = Builder.CreateSub(ScalarTC, VFxUF); | |
| Value *Cmp = | |
| Builder.CreateICmp(CmpInst::Predicate::ICMP_UGT, ScalarTC, VFxUF); | |
| Value *Zero = ConstantInt::getNullValue(ScalarTC->getType()); | |
| return Builder.CreateSelect(Cmp, Sub, Zero); | |
| } | |
| case VPInstruction::ExplicitVectorLength: { | |
| // TODO: Restructure this code with an explicit remainder loop, vsetvli can | |
| // be outside of the main loop. | |
| Value *AVL = State.get(getOperand(0), /*IsScalar*/ true); | |
| // Compute EVL | |
| assert(AVL->getType()->isIntegerTy() && | |
| "Requested vector length should be an integer."); | |
| assert(State.VF.isScalable() && "Expected scalable vector factor."); | |
| Value *VFArg = Builder.getInt32(State.VF.getKnownMinValue()); | |
| Value *EVL = Builder.CreateIntrinsic( | |
| Builder.getInt32Ty(), Intrinsic::experimental_get_vector_length, | |
| {AVL, VFArg, Builder.getTrue()}); | |
| return EVL; | |
| } | |
| case VPInstruction::BranchOnCond: { | |
| Value *Cond = State.get(getOperand(0), VPLane(0)); | |
| // Replace the temporary unreachable terminator with a new conditional | |
| // branch, hooking it up to backward destination for latch blocks now, and | |
| // to forward destination(s) later when they are created. | |
| // Second successor may be backwards - iff it is already in VPBB2IRBB. | |
| VPBasicBlock *SecondVPSucc = | |
| cast<VPBasicBlock>(getParent()->getSuccessors()[1]); | |
| BasicBlock *SecondIRSucc = State.CFG.VPBB2IRBB.lookup(SecondVPSucc); | |
| BasicBlock *IRBB = State.CFG.VPBB2IRBB[getParent()]; | |
| auto *Br = Builder.CreateCondBr(Cond, IRBB, SecondIRSucc); | |
| // First successor is always forward, reset it to nullptr. | |
| Br->setSuccessor(0, nullptr); | |
| IRBB->getTerminator()->eraseFromParent(); | |
| applyMetadata(*Br); | |
| return Br; | |
| } | |
| case VPInstruction::Broadcast: { | |
| return Builder.CreateVectorSplat( | |
| State.VF, State.get(getOperand(0), /*IsScalar*/ true), "broadcast"); | |
| } | |
| case VPInstruction::BuildStructVector: { | |
| // For struct types, we need to build a new 'wide' struct type, where each | |
| // element is widened, i.e., we create a struct of vectors. | |
| auto *StructTy = | |
| cast<StructType>(State.TypeAnalysis.inferScalarType(getOperand(0))); | |
| Value *Res = PoisonValue::get(toVectorizedTy(StructTy, State.VF)); | |
| for (const auto &[LaneIndex, Op] : enumerate(operands())) { | |
| for (unsigned FieldIndex = 0; FieldIndex != StructTy->getNumElements(); | |
| FieldIndex++) { | |
| Value *ScalarValue = | |
| Builder.CreateExtractValue(State.get(Op, true), FieldIndex); | |
| Value *VectorValue = Builder.CreateExtractValue(Res, FieldIndex); | |
| VectorValue = | |
| Builder.CreateInsertElement(VectorValue, ScalarValue, LaneIndex); | |
| Res = Builder.CreateInsertValue(Res, VectorValue, FieldIndex); | |
| } | |
| } | |
| return Res; | |
| } | |
| case VPInstruction::BuildVector: { | |
| auto *ScalarTy = State.TypeAnalysis.inferScalarType(getOperand(0)); | |
| auto NumOfElements = ElementCount::getFixed(getNumOperands()); | |
| Value *Res = PoisonValue::get(toVectorizedTy(ScalarTy, NumOfElements)); | |
| for (const auto &[Idx, Op] : enumerate(operands())) | |
| Res = Builder.CreateInsertElement(Res, State.get(Op, true), | |
| Builder.getInt32(Idx)); | |
| return Res; | |
| } | |
| case VPInstruction::ReductionStartVector: { | |
| if (State.VF.isScalar()) | |
| return State.get(getOperand(0), true); | |
| IRBuilderBase::FastMathFlagGuard FMFG(Builder); | |
| Builder.setFastMathFlags(getFastMathFlags()); | |
| // If this start vector is scaled then it should produce a vector with fewer | |
| // elements than the VF. | |
| ElementCount VF = State.VF.divideCoefficientBy( | |
| cast<VPConstantInt>(getOperand(2))->getZExtValue()); | |
| auto *Iden = Builder.CreateVectorSplat(VF, State.get(getOperand(1), true)); | |
| return Builder.CreateInsertElement(Iden, State.get(getOperand(0), true), | |
| Builder.getInt32(0)); | |
| } | |
| case VPInstruction::ComputeReductionResult: { | |
| RecurKind RK = getRecurKind(); | |
| bool IsOrdered = isReductionOrdered(); | |
| bool IsInLoop = isReductionInLoop(); | |
| assert(!RecurrenceDescriptor::isFindIVRecurrenceKind(RK) && | |
| "FindIV should use min/max reduction kinds"); | |
| // The recipe may have multiple operands to be reduced together. | |
| unsigned NumOperandsToReduce = getNumOperands(); | |
| VectorParts RdxParts(NumOperandsToReduce); | |
| for (unsigned Part = 0; Part < NumOperandsToReduce; ++Part) | |
| RdxParts[Part] = State.get(getOperand(Part), IsInLoop); | |
| IRBuilderBase::FastMathFlagGuard FMFG(Builder); | |
| Builder.setFastMathFlags(getFastMathFlags()); | |
| // Reduce multiple operands into one. | |
| Value *ReducedPartRdx = RdxParts[0]; | |
| if (IsOrdered) { | |
| ReducedPartRdx = RdxParts[NumOperandsToReduce - 1]; | |
| } else { | |
| // Floating-point operations should have some FMF to enable the reduction. | |
| for (unsigned Part = 1; Part < NumOperandsToReduce; ++Part) { | |
| Value *RdxPart = RdxParts[Part]; | |
| if (RecurrenceDescriptor::isMinMaxRecurrenceKind(RK)) | |
| ReducedPartRdx = createMinMaxOp(Builder, RK, ReducedPartRdx, RdxPart); | |
| else { | |
| // For sub-recurrences, each part's reduction variable is already | |
| // negative, we need to do: reduce.add(-acc_uf0 + -acc_uf1) | |
| Instruction::BinaryOps Opcode = | |
| RK == RecurKind::Sub | |
| ? Instruction::Add | |
| : (Instruction::BinaryOps)RecurrenceDescriptor::getOpcode(RK); | |
| ReducedPartRdx = | |
| Builder.CreateBinOp(Opcode, RdxPart, ReducedPartRdx, "bin.rdx"); | |
| } | |
| } | |
| } | |
| // Create the reduction after the loop. Note that inloop reductions create | |
| // the target reduction in the loop using a Reduction recipe. | |
| if (State.VF.isVector() && !IsInLoop) { | |
| // TODO: Support in-order reductions based on the recurrence descriptor. | |
| // All ops in the reduction inherit fast-math-flags from the recurrence | |
| // descriptor. | |
| ReducedPartRdx = createSimpleReduction(Builder, ReducedPartRdx, RK); | |
| } | |
| return ReducedPartRdx; | |
| } | |
| case VPInstruction::ExtractLastLane: | |
| case VPInstruction::ExtractPenultimateElement: { | |
| unsigned Offset = | |
| getOpcode() == VPInstruction::ExtractPenultimateElement ? 2 : 1; | |
| Value *Res; | |
| if (State.VF.isVector()) { | |
| assert(Offset <= State.VF.getKnownMinValue() && | |
| "invalid offset to extract from"); | |
| // Extract lane VF - Offset from the operand. | |
| Res = State.get(getOperand(0), VPLane::getLaneFromEnd(State.VF, Offset)); | |
| } else { | |
| // TODO: Remove ExtractLastLane for scalar VFs. | |
| assert(Offset <= 1 && "invalid offset to extract from"); | |
| Res = State.get(getOperand(0)); | |
| } | |
| if (isa<ExtractElementInst>(Res)) | |
| Res->setName(Name); | |
| return Res; | |
| } | |
| case VPInstruction::LogicalAnd: { | |
| Value *A = State.get(getOperand(0)); | |
| Value *B = State.get(getOperand(1)); | |
| return Builder.CreateLogicalAnd(A, B, Name); | |
| } | |
| case VPInstruction::LogicalOr: { | |
| Value *A = State.get(getOperand(0)); | |
| Value *B = State.get(getOperand(1)); | |
| return Builder.CreateLogicalOr(A, B, Name); | |
| } | |
| case VPInstruction::PtrAdd: { | |
| assert((State.VF.isScalar() || vputils::onlyFirstLaneUsed(this)) && | |
| "can only generate first lane for PtrAdd"); | |
| Value *Ptr = State.get(getOperand(0), VPLane(0)); | |
| Value *Addend = State.get(getOperand(1), VPLane(0)); | |
| return Builder.CreatePtrAdd(Ptr, Addend, Name, getGEPNoWrapFlags()); | |
| } | |
| case VPInstruction::WidePtrAdd: { | |
| Value *Ptr = | |
| State.get(getOperand(0), vputils::isSingleScalar(getOperand(0))); | |
| Value *Addend = State.get(getOperand(1)); | |
| return Builder.CreatePtrAdd(Ptr, Addend, Name, getGEPNoWrapFlags()); | |
| } | |
| case VPInstruction::AnyOf: { | |
| Value *Res = Builder.CreateFreeze(State.get(getOperand(0))); | |
| for (VPValue *Op : drop_begin(operands())) | |
| Res = Builder.CreateOr(Res, Builder.CreateFreeze(State.get(Op))); | |
| return State.VF.isScalar() ? Res : Builder.CreateOrReduce(Res); | |
| } | |
| case VPInstruction::ExtractLane: { | |
| assert(getNumOperands() != 2 && "ExtractLane from single source should be " | |
| "simplified to ExtractElement."); | |
| Value *LaneToExtract = State.get(getOperand(0), true); | |
| Type *IdxTy = State.TypeAnalysis.inferScalarType(getOperand(0)); | |
| Value *Res = nullptr; | |
| Value *RuntimeVF = getRuntimeVF(Builder, IdxTy, State.VF); | |
| for (unsigned Idx = 1; Idx != getNumOperands(); ++Idx) { | |
| Value *VectorStart = | |
| Builder.CreateMul(RuntimeVF, ConstantInt::get(IdxTy, Idx - 1)); | |
| Value *VectorIdx = Idx == 1 | |
| ? LaneToExtract | |
| : Builder.CreateSub(LaneToExtract, VectorStart); | |
| Value *Ext = State.VF.isScalar() | |
| ? State.get(getOperand(Idx)) | |
| : Builder.CreateExtractElement( | |
| State.get(getOperand(Idx)), VectorIdx); | |
| if (Res) { | |
| Value *Cmp = Builder.CreateICmpUGE(LaneToExtract, VectorStart); | |
| Res = Builder.CreateSelect(Cmp, Ext, Res); | |
| } else { | |
| Res = Ext; | |
| } | |
| } | |
| return Res; | |
| } | |
| case VPInstruction::FirstActiveLane: { | |
| Type *Ty = State.TypeAnalysis.inferScalarType(this); | |
| if (getNumOperands() == 1) { | |
| Value *Mask = State.get(getOperand(0)); | |
| return Builder.CreateCountTrailingZeroElems(Ty, Mask, | |
| /*ZeroIsPoison=*/false, Name); | |
| } | |
| // If there are multiple operands, create a chain of selects to pick the | |
| // first operand with an active lane and add the number of lanes of the | |
| // preceding operands. | |
| Value *RuntimeVF = getRuntimeVF(Builder, Ty, State.VF); | |
| unsigned LastOpIdx = getNumOperands() - 1; | |
| Value *Res = nullptr; | |
| for (int Idx = LastOpIdx; Idx >= 0; --Idx) { | |
| Value *TrailingZeros = | |
| State.VF.isScalar() | |
| ? Builder.CreateZExt( | |
| Builder.CreateICmpEQ(State.get(getOperand(Idx)), | |
| Builder.getFalse()), | |
| Ty) | |
| : Builder.CreateCountTrailingZeroElems( | |
| Ty, State.get(getOperand(Idx)), | |
| /*ZeroIsPoison=*/false, Name); | |
| Value *Current = Builder.CreateAdd( | |
| Builder.CreateMul(RuntimeVF, ConstantInt::get(Ty, Idx)), | |
| TrailingZeros); | |
| if (Res) { | |
| Value *Cmp = Builder.CreateICmpNE(TrailingZeros, RuntimeVF); | |
| Res = Builder.CreateSelect(Cmp, Current, Res); | |
| } else { | |
| Res = Current; | |
| } | |
| } | |
| return Res; | |
| } | |
| case VPInstruction::ResumeForEpilogue: | |
| return State.get(getOperand(0), true); | |
| case VPInstruction::Reverse: | |
| return Builder.CreateVectorReverse(State.get(getOperand(0)), "reverse"); | |
| case VPInstruction::ExtractLastActive: { | |
| Value *Result = State.get(getOperand(0), /*IsScalar=*/true); | |
| for (unsigned Idx = 1; Idx < getNumOperands(); Idx += 2) { | |
| Value *Data = State.get(getOperand(Idx)); | |
| Value *Mask = State.get(getOperand(Idx + 1)); | |
| Type *VTy = Data->getType(); | |
| if (State.VF.isScalar()) | |
| Result = Builder.CreateSelect(Mask, Data, Result); | |
| else | |
| Result = Builder.CreateIntrinsic( | |
| Intrinsic::experimental_vector_extract_last_active, {VTy}, | |
| {Data, Mask, Result}); | |
| } | |
| return Result; | |
| } | |
| default: | |
| llvm_unreachable("Unsupported opcode for instruction"); | |
| } | |
| } | |
| InstructionCost VPRecipeWithIRFlags::getCostForRecipeWithOpcode( | |
| unsigned Opcode, ElementCount VF, VPCostContext &Ctx) const { | |
| Type *ScalarTy = Ctx.Types.inferScalarType(this); | |
| Type *ResultTy = VF.isVector() ? toVectorTy(ScalarTy, VF) : ScalarTy; | |
| switch (Opcode) { | |
| case Instruction::FNeg: | |
| return Ctx.TTI.getArithmeticInstrCost(Opcode, ResultTy, Ctx.CostKind); | |
| case Instruction::UDiv: | |
| case Instruction::SDiv: | |
| case Instruction::SRem: | |
| case Instruction::URem: | |
| case Instruction::Add: | |
| case Instruction::FAdd: | |
| case Instruction::Sub: | |
| case Instruction::FSub: | |
| case Instruction::Mul: | |
| case Instruction::FMul: | |
| case Instruction::FDiv: | |
| case Instruction::FRem: | |
| case Instruction::Shl: | |
| case Instruction::LShr: | |
| case Instruction::AShr: | |
| case Instruction::And: | |
| case Instruction::Or: | |
| case Instruction::Xor: { | |
| // Certain instructions can be cheaper if they have a constant second | |
| // operand. One example of this are shifts on x86. | |
| VPValue *RHS = getOperand(1); | |
| TargetTransformInfo::OperandValueInfo RHSInfo = Ctx.getOperandInfo(RHS); | |
| if (RHSInfo.Kind == TargetTransformInfo::OK_AnyValue && | |
| getOperand(1)->isDefinedOutsideLoopRegions()) | |
| RHSInfo.Kind = TargetTransformInfo::OK_UniformValue; | |
| Instruction *CtxI = dyn_cast_or_null<Instruction>(getUnderlyingValue()); | |
| SmallVector<const Value *, 4> Operands; | |
| if (CtxI) | |
| Operands.append(CtxI->value_op_begin(), CtxI->value_op_end()); | |
| return Ctx.TTI.getArithmeticInstrCost( | |
| Opcode, ResultTy, Ctx.CostKind, | |
| {TargetTransformInfo::OK_AnyValue, TargetTransformInfo::OP_None}, | |
| RHSInfo, Operands, CtxI, &Ctx.TLI); | |
| } | |
| case Instruction::Freeze: | |
| // This opcode is unknown. Assume that it is the same as 'mul'. | |
| return Ctx.TTI.getArithmeticInstrCost(Instruction::Mul, ResultTy, | |
| Ctx.CostKind); | |
| case Instruction::ExtractValue: | |
| return Ctx.TTI.getInsertExtractValueCost(Instruction::ExtractValue, | |
| Ctx.CostKind); | |
| case Instruction::ICmp: | |
| case Instruction::FCmp: { | |
| Type *ScalarOpTy = Ctx.Types.inferScalarType(getOperand(0)); | |
| Type *OpTy = VF.isVector() ? toVectorTy(ScalarOpTy, VF) : ScalarOpTy; | |
| Instruction *CtxI = dyn_cast_or_null<Instruction>(getUnderlyingValue()); | |
| return Ctx.TTI.getCmpSelInstrCost( | |
| Opcode, OpTy, CmpInst::makeCmpResultType(OpTy), getPredicate(), | |
| Ctx.CostKind, {TTI::OK_AnyValue, TTI::OP_None}, | |
| {TTI::OK_AnyValue, TTI::OP_None}, CtxI); | |
| } | |
| case Instruction::BitCast: { | |
| Type *ScalarTy = Ctx.Types.inferScalarType(this); | |
| if (ScalarTy->isPointerTy()) | |
| return 0; | |
| [[fallthrough]]; | |
| } | |
| case Instruction::SExt: | |
| case Instruction::ZExt: | |
| case Instruction::FPToUI: | |
| case Instruction::FPToSI: | |
| case Instruction::FPExt: | |
| case Instruction::PtrToInt: | |
| case Instruction::PtrToAddr: | |
| case Instruction::IntToPtr: | |
| case Instruction::SIToFP: | |
| case Instruction::UIToFP: | |
| case Instruction::Trunc: | |
| case Instruction::FPTrunc: | |
| case Instruction::AddrSpaceCast: { | |
| // Computes the CastContextHint from a recipe that may access memory. | |
| auto ComputeCCH = [&](const VPRecipeBase *R) -> TTI::CastContextHint { | |
| if (isa<VPInterleaveBase>(R)) | |
| return TTI::CastContextHint::Interleave; | |
| if (const auto *ReplicateRecipe = dyn_cast<VPReplicateRecipe>(R)) { | |
| // Only compute CCH for memory operations, matching the legacy model | |
| // which only considers loads/stores for cast context hints. | |
| auto *UI = cast<Instruction>(ReplicateRecipe->getUnderlyingValue()); | |
| if (!isa<LoadInst, StoreInst>(UI)) | |
| return TTI::CastContextHint::None; | |
| return ReplicateRecipe->isPredicated() ? TTI::CastContextHint::Masked | |
| : TTI::CastContextHint::Normal; | |
| } | |
| const auto *WidenMemoryRecipe = dyn_cast<VPWidenMemoryRecipe>(R); | |
| if (WidenMemoryRecipe == nullptr) | |
| return TTI::CastContextHint::None; | |
| if (VF.isScalar()) | |
| return TTI::CastContextHint::Normal; | |
| if (!WidenMemoryRecipe->isConsecutive()) | |
| return TTI::CastContextHint::GatherScatter; | |
| if (WidenMemoryRecipe->isMasked()) | |
| return TTI::CastContextHint::Masked; | |
| return TTI::CastContextHint::Normal; | |
| }; | |
| VPValue *Operand = getOperand(0); | |
| TTI::CastContextHint CCH = TTI::CastContextHint::None; | |
| bool IsReverse = false; | |
| // For Trunc/FPTrunc, get the context from the only user. | |
| if (Opcode == Instruction::Trunc || Opcode == Instruction::FPTrunc) { | |
| auto GetOnlyUser = [](const VPSingleDefRecipe *R) -> VPRecipeBase * { | |
| if (R->getNumUsers() == 0 || R->hasMoreThanOneUniqueUser()) | |
| return nullptr; | |
| return dyn_cast<VPRecipeBase>(*R->user_begin()); | |
| }; | |
| if (VPRecipeBase *Recipe = GetOnlyUser(this)) { | |
| if (match(Recipe, | |
| m_CombineOr( | |
| m_Reverse(m_VPValue()), | |
| m_Intrinsic<Intrinsic::experimental_vp_reverse>()))) { | |
| Recipe = GetOnlyUser(cast<VPSingleDefRecipe>(Recipe)); | |
| IsReverse = true; | |
| } | |
| if (Recipe) | |
| CCH = ComputeCCH(Recipe); | |
| } | |
| } | |
| // For Z/Sext, get the context from the operand. | |
| else if (Opcode == Instruction::ZExt || Opcode == Instruction::SExt || | |
| Opcode == Instruction::FPExt) { | |
| if (auto *Recipe = Operand->getDefiningRecipe()) { | |
| VPValue *ReverseOp; | |
| if (match(Recipe, | |
| m_CombineOr(m_Reverse(m_VPValue(ReverseOp)), | |
| m_Intrinsic<Intrinsic::experimental_vp_reverse>( | |
| m_VPValue(ReverseOp))))) { | |
| Recipe = ReverseOp->getDefiningRecipe(); | |
| IsReverse = true; | |
| } | |
| if (Recipe) | |
| CCH = ComputeCCH(Recipe); | |
| } | |
| } | |
| if (IsReverse && CCH != TTI::CastContextHint::None) | |
| CCH = TTI::CastContextHint::Reversed; | |
| auto *ScalarSrcTy = Ctx.Types.inferScalarType(Operand); | |
| Type *SrcTy = VF.isVector() ? toVectorTy(ScalarSrcTy, VF) : ScalarSrcTy; | |
| // Arm TTI will use the underlying instruction to determine the cost. | |
| return Ctx.TTI.getCastInstrCost( | |
| Opcode, ResultTy, SrcTy, CCH, Ctx.CostKind, | |
| dyn_cast_if_present<Instruction>(getUnderlyingValue())); | |
| } | |
| case Instruction::Select: { | |
| SelectInst *SI = cast_or_null<SelectInst>(getUnderlyingValue()); | |
| bool IsScalarCond = getOperand(0)->isDefinedOutsideLoopRegions(); | |
| Type *ScalarTy = Ctx.Types.inferScalarType(this); | |
| VPValue *Op0, *Op1; | |
| bool IsLogicalAnd = | |
| match(this, m_c_LogicalAnd(m_VPValue(Op0), m_VPValue(Op1))); | |
| bool IsLogicalOr = | |
| match(this, m_c_LogicalOr(m_VPValue(Op0), m_VPValue(Op1))); | |
| // Also match the inverted forms: | |
| // select x, false, y --> !x & y (still AND) | |
| // select x, y, true --> !x | y (still OR) | |
| IsLogicalAnd |= | |
| match(this, m_Select(m_VPValue(Op0), m_False(), m_VPValue(Op1))); | |
| IsLogicalOr |= | |
| match(this, m_Select(m_VPValue(Op0), m_VPValue(Op1), m_True())); | |
| if (!IsScalarCond && ScalarTy->getScalarSizeInBits() == 1 && | |
| (IsLogicalAnd || IsLogicalOr)) { | |
| // select x, y, false --> x & y | |
| // select x, true, y --> x | y | |
| const auto [Op1VK, Op1VP] = Ctx.getOperandInfo(Op0); | |
| const auto [Op2VK, Op2VP] = Ctx.getOperandInfo(Op1); | |
| SmallVector<const Value *, 2> Operands; | |
| if (SI && all_of(operands(), | |
| [](VPValue *Op) { return Op->getUnderlyingValue(); })) | |
| append_range(Operands, SI->operands()); | |
| return Ctx.TTI.getArithmeticInstrCost( | |
| IsLogicalOr ? Instruction::Or : Instruction::And, ResultTy, | |
| Ctx.CostKind, {Op1VK, Op1VP}, {Op2VK, Op2VP}, Operands, SI); | |
| } | |
| Type *CondTy = Ctx.Types.inferScalarType(getOperand(0)); | |
| if (!IsScalarCond && VF.isVector()) | |
| CondTy = VectorType::get(CondTy, VF); | |
| llvm::CmpPredicate Pred; | |
| if (!match(getOperand(0), m_Cmp(Pred, m_VPValue(), m_VPValue()))) | |
| if (auto *CondIRV = dyn_cast<VPIRValue>(getOperand(0))) | |
| if (auto *Cmp = dyn_cast<CmpInst>(CondIRV->getValue())) | |
| Pred = Cmp->getPredicate(); | |
| Type *VectorTy = toVectorTy(Ctx.Types.inferScalarType(this), VF); | |
| return Ctx.TTI.getCmpSelInstrCost( | |
| Instruction::Select, VectorTy, CondTy, Pred, Ctx.CostKind, | |
| {TTI::OK_AnyValue, TTI::OP_None}, {TTI::OK_AnyValue, TTI::OP_None}, SI); | |
| } | |
| } | |
| llvm_unreachable("called for unsupported opcode"); | |
| } | |
| InstructionCost VPInstruction::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| if (Instruction::isBinaryOp(getOpcode())) { | |
| if (!getUnderlyingValue() && getOpcode() != Instruction::FMul) { | |
| // TODO: Compute cost for VPInstructions without underlying values once | |
| // the legacy cost model has been retired. | |
| return 0; | |
| } | |
| assert(!doesGeneratePerAllLanes() && | |
| "Should only generate a vector value or single scalar, not scalars " | |
| "for all lanes."); | |
| return getCostForRecipeWithOpcode( | |
| getOpcode(), | |
| vputils::onlyFirstLaneUsed(this) ? ElementCount::getFixed(1) : VF, Ctx); | |
| } | |
| switch (getOpcode()) { | |
| case Instruction::Select: { | |
| llvm::CmpPredicate Pred = CmpInst::BAD_ICMP_PREDICATE; | |
| match(getOperand(0), m_Cmp(Pred, m_VPValue(), m_VPValue())); | |
| auto *CondTy = Ctx.Types.inferScalarType(getOperand(0)); | |
| auto *VecTy = Ctx.Types.inferScalarType(getOperand(1)); | |
| if (!vputils::onlyFirstLaneUsed(this)) { | |
| CondTy = toVectorTy(CondTy, VF); | |
| VecTy = toVectorTy(VecTy, VF); | |
| } | |
| return Ctx.TTI.getCmpSelInstrCost(Instruction::Select, VecTy, CondTy, Pred, | |
| Ctx.CostKind); | |
| } | |
| case Instruction::ExtractElement: | |
| case VPInstruction::ExtractLane: { | |
| if (VF.isScalar()) { | |
| // ExtractLane with VF=1 takes care of handling extracting across multiple | |
| // parts. | |
| return 0; | |
| } | |
| // Add on the cost of extracting the element. | |
| auto *VecTy = toVectorTy(Ctx.Types.inferScalarType(getOperand(0)), VF); | |
| return Ctx.TTI.getVectorInstrCost(Instruction::ExtractElement, VecTy, | |
| Ctx.CostKind); | |
| } | |
| case VPInstruction::AnyOf: { | |
| auto *VecTy = toVectorTy(Ctx.Types.inferScalarType(this), VF); | |
| return Ctx.TTI.getArithmeticReductionCost( | |
| Instruction::Or, cast<VectorType>(VecTy), std::nullopt, Ctx.CostKind); | |
| } | |
| case VPInstruction::FirstActiveLane: { | |
| Type *Ty = Ctx.Types.inferScalarType(this); | |
| Type *ScalarTy = Ctx.Types.inferScalarType(getOperand(0)); | |
| if (VF.isScalar()) | |
| return Ctx.TTI.getCmpSelInstrCost(Instruction::ICmp, ScalarTy, | |
| CmpInst::makeCmpResultType(ScalarTy), | |
| CmpInst::ICMP_EQ, Ctx.CostKind); | |
| // Calculate the cost of determining the lane index. | |
| auto *PredTy = toVectorTy(ScalarTy, VF); | |
| IntrinsicCostAttributes Attrs(Intrinsic::experimental_cttz_elts, Ty, | |
| {PredTy, Type::getInt1Ty(Ctx.LLVMCtx)}); | |
| return Ctx.TTI.getIntrinsicInstrCost(Attrs, Ctx.CostKind); | |
| } | |
| case VPInstruction::LastActiveLane: { | |
| Type *Ty = Ctx.Types.inferScalarType(this); | |
| Type *ScalarTy = Ctx.Types.inferScalarType(getOperand(0)); | |
| if (VF.isScalar()) | |
| return Ctx.TTI.getCmpSelInstrCost(Instruction::ICmp, ScalarTy, | |
| CmpInst::makeCmpResultType(ScalarTy), | |
| CmpInst::ICMP_EQ, Ctx.CostKind); | |
| // Calculate the cost of determining the lane index: NOT + cttz_elts + SUB. | |
| auto *PredTy = toVectorTy(ScalarTy, VF); | |
| IntrinsicCostAttributes Attrs(Intrinsic::experimental_cttz_elts, Ty, | |
| {PredTy, Type::getInt1Ty(Ctx.LLVMCtx)}); | |
| InstructionCost Cost = Ctx.TTI.getIntrinsicInstrCost(Attrs, Ctx.CostKind); | |
| // Add cost of NOT operation on the predicate. | |
| Cost += Ctx.TTI.getArithmeticInstrCost( | |
| Instruction::Xor, PredTy, Ctx.CostKind, | |
| {TargetTransformInfo::OK_AnyValue, TargetTransformInfo::OP_None}, | |
| {TargetTransformInfo::OK_UniformConstantValue, | |
| TargetTransformInfo::OP_None}); | |
| // Add cost of SUB operation on the index. | |
| Cost += Ctx.TTI.getArithmeticInstrCost(Instruction::Sub, Ty, Ctx.CostKind); | |
| return Cost; | |
| } | |
| case VPInstruction::ExtractLastActive: { | |
| Type *ScalarTy = Ctx.Types.inferScalarType(this); | |
| Type *VecTy = toVectorTy(ScalarTy, VF); | |
| Type *MaskTy = toVectorTy(Type::getInt1Ty(Ctx.LLVMCtx), VF); | |
| IntrinsicCostAttributes ICA( | |
| Intrinsic::experimental_vector_extract_last_active, ScalarTy, | |
| {VecTy, MaskTy, ScalarTy}); | |
| return Ctx.TTI.getIntrinsicInstrCost(ICA, Ctx.CostKind); | |
| } | |
| case VPInstruction::FirstOrderRecurrenceSplice: { | |
| assert(VF.isVector() && "Scalar FirstOrderRecurrenceSplice?"); | |
| Type *VectorTy = toVectorTy(Ctx.Types.inferScalarType(this), VF); | |
| return Ctx.TTI.getShuffleCost( | |
| TargetTransformInfo::SK_Splice, cast<VectorType>(VectorTy), | |
| cast<VectorType>(VectorTy), {}, Ctx.CostKind, -1); | |
| } | |
| case VPInstruction::ActiveLaneMask: { | |
| Type *ArgTy = Ctx.Types.inferScalarType(getOperand(0)); | |
| unsigned Multiplier = cast<VPConstantInt>(getOperand(2))->getZExtValue(); | |
| Type *RetTy = toVectorTy(Type::getInt1Ty(Ctx.LLVMCtx), VF * Multiplier); | |
| IntrinsicCostAttributes Attrs(Intrinsic::get_active_lane_mask, RetTy, | |
| {ArgTy, ArgTy}); | |
| return Ctx.TTI.getIntrinsicInstrCost(Attrs, Ctx.CostKind); | |
| } | |
| case VPInstruction::ExplicitVectorLength: { | |
| Type *Arg0Ty = Ctx.Types.inferScalarType(getOperand(0)); | |
| Type *I32Ty = Type::getInt32Ty(Ctx.LLVMCtx); | |
| Type *I1Ty = Type::getInt1Ty(Ctx.LLVMCtx); | |
| IntrinsicCostAttributes Attrs(Intrinsic::experimental_get_vector_length, | |
| I32Ty, {Arg0Ty, I32Ty, I1Ty}); | |
| return Ctx.TTI.getIntrinsicInstrCost(Attrs, Ctx.CostKind); | |
| } | |
| case VPInstruction::Reverse: { | |
| assert(VF.isVector() && "Reverse operation must be vector type"); | |
| Type *EltTy = Ctx.Types.inferScalarType(this); | |
| // Skip the reverse operation cost for the mask. | |
| // FIXME: Remove this once redundant mask reverse operations can be | |
| // eliminated by VPlanTransforms::cse before cost computation. | |
| if (EltTy->isIntegerTy(1)) | |
| return 0; | |
| auto *VectorTy = cast<VectorType>(toVectorTy(EltTy, VF)); | |
| return Ctx.TTI.getShuffleCost(TargetTransformInfo::SK_Reverse, VectorTy, | |
| VectorTy, /*Mask=*/{}, Ctx.CostKind, | |
| /*Index=*/0); | |
| } | |
| case VPInstruction::ExtractLastLane: { | |
| // Add on the cost of extracting the element. | |
| auto *VecTy = toVectorTy(Ctx.Types.inferScalarType(getOperand(0)), VF); | |
| return Ctx.TTI.getIndexedVectorInstrCostFromEnd(Instruction::ExtractElement, | |
| VecTy, Ctx.CostKind, 0); | |
| } | |
| case Instruction::FCmp: | |
| case Instruction::ICmp: | |
| // FIXME: We don't handle scalar compares here yet. Scalar compares used for | |
| // the loop exit condition are handled by the legacy cost model, but other | |
| // scalar compares (e.g. in the middle block deciding whether to execute the | |
| // scalar epilogue) aren't accounted for. | |
| if (vputils::onlyFirstLaneUsed(this)) | |
| return 0; | |
| return getCostForRecipeWithOpcode(getOpcode(), VF, Ctx); | |
| case VPInstruction::ExtractPenultimateElement: | |
| if (VF == ElementCount::getScalable(1)) | |
| return InstructionCost::getInvalid(); | |
| [[fallthrough]]; | |
| default: | |
| // TODO: Compute cost other VPInstructions once the legacy cost model has | |
| // been retired. | |
| assert(!getUnderlyingValue() && | |
| "unexpected VPInstruction witht underlying value"); | |
| return 0; | |
| } | |
| } | |
| bool VPInstruction::isVectorToScalar() const { | |
| return getOpcode() == VPInstruction::ExtractLastLane || | |
| getOpcode() == VPInstruction::ExtractPenultimateElement || | |
| getOpcode() == Instruction::ExtractElement || | |
| getOpcode() == VPInstruction::ExtractLane || | |
| getOpcode() == VPInstruction::FirstActiveLane || | |
| getOpcode() == VPInstruction::LastActiveLane || | |
| getOpcode() == VPInstruction::ExtractLastActive || | |
| getOpcode() == VPInstruction::ComputeReductionResult || | |
| getOpcode() == VPInstruction::AnyOf; | |
| } | |
| bool VPInstruction::isSingleScalar() const { | |
| switch (getOpcode()) { | |
| case Instruction::Load: | |
| case Instruction::PHI: | |
| case VPInstruction::ExplicitVectorLength: | |
| case VPInstruction::ResumeForEpilogue: | |
| case VPInstruction::VScale: | |
| return true; | |
| default: | |
| return isScalarCast(); | |
| } | |
| } | |
| void VPInstruction::execute(VPTransformState &State) { | |
| assert(!isMasked() && "cannot execute masked VPInstruction"); | |
| assert(!State.Lane && "VPInstruction executing an Lane"); | |
| IRBuilderBase::FastMathFlagGuard FMFGuard(State.Builder); | |
| assert(flagsValidForOpcode(getOpcode()) && | |
| "Set flags not supported for the provided opcode"); | |
| assert(hasRequiredFlagsForOpcode(getOpcode()) && | |
| "Opcode requires specific flags to be set"); | |
| if (hasFastMathFlags()) | |
| State.Builder.setFastMathFlags(getFastMathFlags()); | |
| Value *GeneratedValue = generate(State); | |
| if (!hasResult()) | |
| return; | |
| assert(GeneratedValue && "generate must produce a value"); | |
| bool GeneratesPerFirstLaneOnly = canGenerateScalarForFirstLane() && | |
| (vputils::onlyFirstLaneUsed(this) || | |
| isVectorToScalar() || isSingleScalar()); | |
| assert((((GeneratedValue->getType()->isVectorTy() || | |
| GeneratedValue->getType()->isStructTy()) == | |
| !GeneratesPerFirstLaneOnly) || | |
| State.VF.isScalar()) && | |
| "scalar value but not only first lane defined"); | |
| State.set(this, GeneratedValue, | |
| /*IsScalar*/ GeneratesPerFirstLaneOnly); | |
| if (getOpcode() == VPInstruction::ResumeForEpilogue) { | |
| // FIXME: This is a workaround to enable reliable updates of the scalar loop | |
| // resume phis, when vectorizing the epilogue. Must be removed once epilogue | |
| // vectorization explicitly connects VPlans. | |
| setUnderlyingValue(GeneratedValue); | |
| } | |
| } | |
| bool VPInstruction::opcodeMayReadOrWriteFromMemory() const { | |
| if (Instruction::isBinaryOp(getOpcode()) || | |
| Instruction::isUnaryOp(getOpcode()) || Instruction::isCast(getOpcode())) | |
| return false; | |
| switch (getOpcode()) { | |
| case Instruction::ExtractValue: | |
| case Instruction::InsertValue: | |
| case Instruction::GetElementPtr: | |
| case Instruction::ExtractElement: | |
| case Instruction::InsertElement: | |
| case Instruction::Freeze: | |
| case Instruction::FCmp: | |
| case Instruction::ICmp: | |
| case Instruction::Select: | |
| case Instruction::PHI: | |
| case VPInstruction::AnyOf: | |
| case VPInstruction::BranchOnCond: | |
| case VPInstruction::BranchOnTwoConds: | |
| case VPInstruction::BranchOnCount: | |
| case VPInstruction::Broadcast: | |
| case VPInstruction::BuildStructVector: | |
| case VPInstruction::BuildVector: | |
| case VPInstruction::CalculateTripCountMinusVF: | |
| case VPInstruction::CanonicalIVIncrementForPart: | |
| case VPInstruction::ExtractLane: | |
| case VPInstruction::ExtractLastLane: | |
| case VPInstruction::ExtractLastPart: | |
| case VPInstruction::ExtractPenultimateElement: | |
| case VPInstruction::ActiveLaneMask: | |
| case VPInstruction::ExitingIVValue: | |
| case VPInstruction::ExplicitVectorLength: | |
| case VPInstruction::FirstActiveLane: | |
| case VPInstruction::LastActiveLane: | |
| case VPInstruction::ExtractLastActive: | |
| case VPInstruction::FirstOrderRecurrenceSplice: | |
| case VPInstruction::LogicalAnd: | |
| case VPInstruction::LogicalOr: | |
| case VPInstruction::MaskedCond: | |
| case VPInstruction::Not: | |
| case VPInstruction::PtrAdd: | |
| case VPInstruction::WideIVStep: | |
| case VPInstruction::WidePtrAdd: | |
| case VPInstruction::StepVector: | |
| case VPInstruction::ReductionStartVector: | |
| case VPInstruction::Reverse: | |
| case VPInstruction::VScale: | |
| case VPInstruction::Unpack: | |
| return false; | |
| case Instruction::Call: | |
| return !getCalledFunction(*this)->doesNotAccessMemory(); | |
| default: | |
| return true; | |
| } | |
| } | |
| bool VPInstruction::usesFirstLaneOnly(const VPValue *Op) const { | |
| assert(is_contained(operands(), Op) && "Op must be an operand of the recipe"); | |
| if (Instruction::isBinaryOp(getOpcode()) || Instruction::isCast(getOpcode())) | |
| return vputils::onlyFirstLaneUsed(this); | |
| switch (getOpcode()) { | |
| default: | |
| return false; | |
| case Instruction::ExtractElement: | |
| return Op == getOperand(1); | |
| case Instruction::InsertElement: | |
| return Op == getOperand(1) || Op == getOperand(2); | |
| case Instruction::PHI: | |
| return true; | |
| case Instruction::FCmp: | |
| case Instruction::ICmp: | |
| case Instruction::Select: | |
| case Instruction::Or: | |
| case Instruction::Freeze: | |
| case VPInstruction::Not: | |
| // TODO: Cover additional opcodes. | |
| return vputils::onlyFirstLaneUsed(this); | |
| case Instruction::Load: | |
| case VPInstruction::ActiveLaneMask: | |
| case VPInstruction::ExplicitVectorLength: | |
| case VPInstruction::CalculateTripCountMinusVF: | |
| case VPInstruction::CanonicalIVIncrementForPart: | |
| case VPInstruction::BranchOnCount: | |
| case VPInstruction::BranchOnCond: | |
| case VPInstruction::BranchOnTwoConds: | |
| case VPInstruction::Broadcast: | |
| case VPInstruction::ReductionStartVector: | |
| return true; | |
| case VPInstruction::BuildStructVector: | |
| case VPInstruction::BuildVector: | |
| // Before replicating by VF, Build(Struct)Vector uses all lanes of the | |
| // operand, after replicating its operands only the first lane is used. | |
| // Before replicating, it will have only a single operand. | |
| return getNumOperands() > 1; | |
| case VPInstruction::PtrAdd: | |
| return Op == getOperand(0) || vputils::onlyFirstLaneUsed(this); | |
| case VPInstruction::WidePtrAdd: | |
| // WidePtrAdd supports scalar and vector base addresses. | |
| return false; | |
| case VPInstruction::ExitingIVValue: | |
| case VPInstruction::ExtractLane: | |
| return Op == getOperand(0); | |
| }; | |
| llvm_unreachable("switch should return"); | |
| } | |
| bool VPInstruction::usesFirstPartOnly(const VPValue *Op) const { | |
| assert(is_contained(operands(), Op) && "Op must be an operand of the recipe"); | |
| if (Instruction::isBinaryOp(getOpcode())) | |
| return vputils::onlyFirstPartUsed(this); | |
| switch (getOpcode()) { | |
| default: | |
| return false; | |
| case Instruction::FCmp: | |
| case Instruction::ICmp: | |
| case Instruction::Select: | |
| return vputils::onlyFirstPartUsed(this); | |
| case VPInstruction::BranchOnCount: | |
| case VPInstruction::BranchOnCond: | |
| case VPInstruction::BranchOnTwoConds: | |
| case VPInstruction::CanonicalIVIncrementForPart: | |
| return true; | |
| }; | |
| llvm_unreachable("switch should return"); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPInstruction::dump() const { | |
| VPSlotTracker SlotTracker(getParent()->getPlan()); | |
| printRecipe(dbgs(), "", SlotTracker); | |
| } | |
| void VPInstruction::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "EMIT" << (isSingleScalar() ? "-SCALAR" : "") << " "; | |
| if (hasResult()) { | |
| printAsOperand(O, SlotTracker); | |
| O << " = "; | |
| } | |
| switch (getOpcode()) { | |
| case VPInstruction::Not: | |
| O << "not"; | |
| break; | |
| case VPInstruction::ActiveLaneMask: | |
| O << "active lane mask"; | |
| break; | |
| case VPInstruction::ExplicitVectorLength: | |
| O << "EXPLICIT-VECTOR-LENGTH"; | |
| break; | |
| case VPInstruction::FirstOrderRecurrenceSplice: | |
| O << "first-order splice"; | |
| break; | |
| case VPInstruction::BranchOnCond: | |
| O << "branch-on-cond"; | |
| break; | |
| case VPInstruction::BranchOnTwoConds: | |
| O << "branch-on-two-conds"; | |
| break; | |
| case VPInstruction::CalculateTripCountMinusVF: | |
| O << "TC > VF ? TC - VF : 0"; | |
| break; | |
| case VPInstruction::CanonicalIVIncrementForPart: | |
| O << "VF * Part +"; | |
| break; | |
| case VPInstruction::BranchOnCount: | |
| O << "branch-on-count"; | |
| break; | |
| case VPInstruction::Broadcast: | |
| O << "broadcast"; | |
| break; | |
| case VPInstruction::BuildStructVector: | |
| O << "buildstructvector"; | |
| break; | |
| case VPInstruction::BuildVector: | |
| O << "buildvector"; | |
| break; | |
| case VPInstruction::ExitingIVValue: | |
| O << "exiting-iv-value"; | |
| break; | |
| case VPInstruction::MaskedCond: | |
| O << "masked-cond"; | |
| break; | |
| case VPInstruction::ExtractLane: | |
| O << "extract-lane"; | |
| break; | |
| case VPInstruction::ExtractLastLane: | |
| O << "extract-last-lane"; | |
| break; | |
| case VPInstruction::ExtractLastPart: | |
| O << "extract-last-part"; | |
| break; | |
| case VPInstruction::ExtractPenultimateElement: | |
| O << "extract-penultimate-element"; | |
| break; | |
| case VPInstruction::ComputeReductionResult: | |
| O << "compute-reduction-result"; | |
| break; | |
| case VPInstruction::LogicalAnd: | |
| O << "logical-and"; | |
| break; | |
| case VPInstruction::LogicalOr: | |
| O << "logical-or"; | |
| break; | |
| case VPInstruction::PtrAdd: | |
| O << "ptradd"; | |
| break; | |
| case VPInstruction::WidePtrAdd: | |
| O << "wide-ptradd"; | |
| break; | |
| case VPInstruction::AnyOf: | |
| O << "any-of"; | |
| break; | |
| case VPInstruction::FirstActiveLane: | |
| O << "first-active-lane"; | |
| break; | |
| case VPInstruction::LastActiveLane: | |
| O << "last-active-lane"; | |
| break; | |
| case VPInstruction::ReductionStartVector: | |
| O << "reduction-start-vector"; | |
| break; | |
| case VPInstruction::ResumeForEpilogue: | |
| O << "resume-for-epilogue"; | |
| break; | |
| case VPInstruction::Reverse: | |
| O << "reverse"; | |
| break; | |
| case VPInstruction::Unpack: | |
| O << "unpack"; | |
| break; | |
| case VPInstruction::ExtractLastActive: | |
| O << "extract-last-active"; | |
| break; | |
| default: | |
| O << Instruction::getOpcodeName(getOpcode()); | |
| } | |
| printFlags(O); | |
| printOperands(O, SlotTracker); | |
| } | |
| #endif | |
| void VPInstructionWithType::execute(VPTransformState &State) { | |
| State.setDebugLocFrom(getDebugLoc()); | |
| if (isScalarCast()) { | |
| Value *Op = State.get(getOperand(0), VPLane(0)); | |
| Value *Cast = State.Builder.CreateCast(Instruction::CastOps(getOpcode()), | |
| Op, ResultTy); | |
| State.set(this, Cast, VPLane(0)); | |
| return; | |
| } | |
| switch (getOpcode()) { | |
| case VPInstruction::StepVector: { | |
| Value *StepVector = | |
| State.Builder.CreateStepVector(VectorType::get(ResultTy, State.VF)); | |
| State.set(this, StepVector); | |
| break; | |
| } | |
| case VPInstruction::VScale: { | |
| Value *VScale = State.Builder.CreateVScale(ResultTy); | |
| State.set(this, VScale, true); | |
| break; | |
| } | |
| default: | |
| llvm_unreachable("opcode not implemented yet"); | |
| } | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPInstructionWithType::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "EMIT" << (isSingleScalar() ? "-SCALAR" : "") << " "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = "; | |
| switch (getOpcode()) { | |
| case VPInstruction::WideIVStep: | |
| O << "wide-iv-step "; | |
| printOperands(O, SlotTracker); | |
| break; | |
| case VPInstruction::StepVector: | |
| O << "step-vector " << *ResultTy; | |
| break; | |
| case VPInstruction::VScale: | |
| O << "vscale " << *ResultTy; | |
| break; | |
| case Instruction::Load: | |
| O << "load "; | |
| printOperands(O, SlotTracker); | |
| break; | |
| default: | |
| assert(Instruction::isCast(getOpcode()) && "unhandled opcode"); | |
| O << Instruction::getOpcodeName(getOpcode()) << " "; | |
| printOperands(O, SlotTracker); | |
| O << " to " << *ResultTy; | |
| } | |
| } | |
| #endif | |
| void VPPhi::execute(VPTransformState &State) { | |
| State.setDebugLocFrom(getDebugLoc()); | |
| PHINode *NewPhi = State.Builder.CreatePHI( | |
| State.TypeAnalysis.inferScalarType(this), 2, getName()); | |
| unsigned NumIncoming = getNumIncoming(); | |
| // Detect header phis: the parent block dominates its second incoming block | |
| // (the latch). Those IR incoming values have not been generated yet and need | |
| // to be added after they have been executed. | |
| if (NumIncoming == 2 && | |
| State.VPDT.dominates(getParent(), getIncomingBlock(1))) { | |
| NumIncoming = 1; | |
| } | |
| for (unsigned Idx = 0; Idx != NumIncoming; ++Idx) { | |
| Value *IncV = State.get(getIncomingValue(Idx), VPLane(0)); | |
| BasicBlock *PredBB = State.CFG.VPBB2IRBB.at(getIncomingBlock(Idx)); | |
| NewPhi->addIncoming(IncV, PredBB); | |
| } | |
| State.set(this, NewPhi, VPLane(0)); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPPhi::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "EMIT" << (isSingleScalar() ? "-SCALAR" : "") << " "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = phi"; | |
| printFlags(O); | |
| printPhiOperands(O, SlotTracker); | |
| } | |
| #endif | |
| VPIRInstruction *VPIRInstruction ::create(Instruction &I) { | |
| if (auto *Phi = dyn_cast<PHINode>(&I)) | |
| return new VPIRPhi(*Phi); | |
| return new VPIRInstruction(I); | |
| } | |
| void VPIRInstruction::execute(VPTransformState &State) { | |
| assert(!isa<VPIRPhi>(this) && getNumOperands() == 0 && | |
| "PHINodes must be handled by VPIRPhi"); | |
| // Advance the insert point after the wrapped IR instruction. This allows | |
| // interleaving VPIRInstructions and other recipes. | |
| State.Builder.SetInsertPoint(I.getParent(), std::next(I.getIterator())); | |
| } | |
| InstructionCost VPIRInstruction::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| // The recipe wraps an existing IR instruction on the border of VPlan's scope, | |
| // hence it does not contribute to the cost-modeling for the VPlan. | |
| return 0; | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPIRInstruction::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "IR " << I; | |
| } | |
| #endif | |
| void VPIRPhi::execute(VPTransformState &State) { | |
| PHINode *Phi = &getIRPhi(); | |
| for (const auto &[Idx, Op] : enumerate(operands())) { | |
| VPValue *ExitValue = Op; | |
| auto Lane = vputils::isSingleScalar(ExitValue) | |
| ? VPLane::getFirstLane() | |
| : VPLane::getLastLaneForVF(State.VF); | |
| VPBlockBase *Pred = getParent()->getPredecessors()[Idx]; | |
| auto *PredVPBB = Pred->getExitingBasicBlock(); | |
| BasicBlock *PredBB = State.CFG.VPBB2IRBB[PredVPBB]; | |
| // Set insertion point in PredBB in case an extract needs to be generated. | |
| // TODO: Model extracts explicitly. | |
| State.Builder.SetInsertPoint(PredBB->getTerminator()); | |
| Value *V = State.get(ExitValue, VPLane(Lane)); | |
| // If there is no existing block for PredBB in the phi, add a new incoming | |
| // value. Otherwise update the existing incoming value for PredBB. | |
| if (Phi->getBasicBlockIndex(PredBB) == -1) | |
| Phi->addIncoming(V, PredBB); | |
| else | |
| Phi->setIncomingValueForBlock(PredBB, V); | |
| } | |
| // Advance the insert point after the wrapped IR instruction. This allows | |
| // interleaving VPIRInstructions and other recipes. | |
| State.Builder.SetInsertPoint(Phi->getParent(), std::next(Phi->getIterator())); | |
| } | |
| void VPPhiAccessors::removeIncomingValueFor(VPBlockBase *IncomingBlock) const { | |
| VPRecipeBase *R = const_cast<VPRecipeBase *>(getAsRecipe()); | |
| assert(R->getNumOperands() == R->getParent()->getNumPredecessors() && | |
| "Number of phi operands must match number of predecessors"); | |
| unsigned Position = R->getParent()->getIndexForPredecessor(IncomingBlock); | |
| R->removeOperand(Position); | |
| } | |
| VPValue * | |
| VPPhiAccessors::getIncomingValueForBlock(const VPBasicBlock *VPBB) const { | |
| VPRecipeBase *R = const_cast<VPRecipeBase *>(getAsRecipe()); | |
| return getIncomingValue(R->getParent()->getIndexForPredecessor(VPBB)); | |
| } | |
| void VPPhiAccessors::setIncomingValueForBlock(const VPBasicBlock *VPBB, | |
| VPValue *V) const { | |
| VPRecipeBase *R = const_cast<VPRecipeBase *>(getAsRecipe()); | |
| R->setOperand(R->getParent()->getIndexForPredecessor(VPBB), V); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPPhiAccessors::printPhiOperands(raw_ostream &O, | |
| VPSlotTracker &SlotTracker) const { | |
| interleaveComma(enumerate(getAsRecipe()->operands()), O, | |
| [this, &O, &SlotTracker](auto Op) { | |
| O << "[ "; | |
| Op.value()->printAsOperand(O, SlotTracker); | |
| O << ", "; | |
| getIncomingBlock(Op.index())->printAsOperand(O); | |
| O << " ]"; | |
| }); | |
| } | |
| #endif | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPIRPhi::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| VPIRInstruction::printRecipe(O, Indent, SlotTracker); | |
| if (getNumOperands() != 0) { | |
| O << " (extra operand" << (getNumOperands() > 1 ? "s" : "") << ": "; | |
| interleaveComma(incoming_values_and_blocks(), O, | |
| [&O, &SlotTracker](auto Op) { | |
| std::get<0>(Op)->printAsOperand(O, SlotTracker); | |
| O << " from "; | |
| std::get<1>(Op)->printAsOperand(O); | |
| }); | |
| O << ")"; | |
| } | |
| } | |
| #endif | |
| void VPIRMetadata::applyMetadata(Instruction &I) const { | |
| for (const auto &[Kind, Node] : Metadata) | |
| I.setMetadata(Kind, Node); | |
| } | |
| void VPIRMetadata::intersect(const VPIRMetadata &Other) { | |
| SmallVector<std::pair<unsigned, MDNode *>> MetadataIntersection; | |
| for (const auto &[KindA, MDA] : Metadata) { | |
| for (const auto &[KindB, MDB] : Other.Metadata) { | |
| if (KindA == KindB && MDA == MDB) { | |
| MetadataIntersection.emplace_back(KindA, MDA); | |
| break; | |
| } | |
| } | |
| } | |
| Metadata = std::move(MetadataIntersection); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPIRMetadata::print(raw_ostream &O, VPSlotTracker &SlotTracker) const { | |
| const Module *M = SlotTracker.getModule(); | |
| if (Metadata.empty() || !M) | |
| return; | |
| ArrayRef<StringRef> MDNames = SlotTracker.getMDNames(); | |
| O << " ("; | |
| interleaveComma(Metadata, O, [&](const auto &KindNodePair) { | |
| auto [Kind, Node] = KindNodePair; | |
| assert(Kind < MDNames.size() && !MDNames[Kind].empty() && | |
| "Unexpected unnamed metadata kind"); | |
| O << "!" << MDNames[Kind] << " "; | |
| Node->printAsOperand(O, M); | |
| }); | |
| O << ")"; | |
| } | |
| #endif | |
| void VPWidenCallRecipe::execute(VPTransformState &State) { | |
| assert(State.VF.isVector() && "not widening"); | |
| assert(Variant != nullptr && "Can't create vector function."); | |
| FunctionType *VFTy = Variant->getFunctionType(); | |
| // Add return type if intrinsic is overloaded on it. | |
| SmallVector<Value *, 4> Args; | |
| for (const auto &I : enumerate(args())) { | |
| Value *Arg; | |
| // Some vectorized function variants may also take a scalar argument, | |
| // e.g. linear parameters for pointers. This needs to be the scalar value | |
| // from the start of the respective part when interleaving. | |
| if (!VFTy->getParamType(I.index())->isVectorTy()) | |
| Arg = State.get(I.value(), VPLane(0)); | |
| else | |
| Arg = State.get(I.value(), usesFirstLaneOnly(I.value())); | |
| Args.push_back(Arg); | |
| } | |
| auto *CI = cast_or_null<CallInst>(getUnderlyingValue()); | |
| SmallVector<OperandBundleDef, 1> OpBundles; | |
| if (CI) | |
| CI->getOperandBundlesAsDefs(OpBundles); | |
| CallInst *V = State.Builder.CreateCall(Variant, Args, OpBundles); | |
| applyFlags(*V); | |
| applyMetadata(*V); | |
| V->setCallingConv(Variant->getCallingConv()); | |
| if (!V->getType()->isVoidTy()) | |
| State.set(this, V); | |
| } | |
| InstructionCost VPWidenCallRecipe::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| return Ctx.TTI.getCallInstrCost(nullptr, Variant->getReturnType(), | |
| Variant->getFunctionType()->params(), | |
| Ctx.CostKind); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPWidenCallRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "WIDEN-CALL "; | |
| Function *CalledFn = getCalledScalarFunction(); | |
| if (CalledFn->getReturnType()->isVoidTy()) | |
| O << "void "; | |
| else { | |
| printAsOperand(O, SlotTracker); | |
| O << " = "; | |
| } | |
| O << "call"; | |
| printFlags(O); | |
| O << " @" << CalledFn->getName() << "("; | |
| interleaveComma(args(), O, [&O, &SlotTracker](VPValue *Op) { | |
| Op->printAsOperand(O, SlotTracker); | |
| }); | |
| O << ")"; | |
| O << " (using library function"; | |
| if (Variant->hasName()) | |
| O << ": " << Variant->getName(); | |
| O << ")"; | |
| } | |
| #endif | |
| void VPWidenIntrinsicRecipe::execute(VPTransformState &State) { | |
| assert(State.VF.isVector() && "not widening"); | |
| SmallVector<Type *, 2> TysForDecl; | |
| // Add return type if intrinsic is overloaded on it. | |
| if (isVectorIntrinsicWithOverloadTypeAtArg(VectorIntrinsicID, -1, | |
| State.TTI)) { | |
| Type *RetTy = toVectorizedTy(getResultType(), State.VF); | |
| ArrayRef<Type *> ContainedTys = getContainedTypes(RetTy); | |
| for (auto [Idx, Ty] : enumerate(ContainedTys)) { | |
| if (isVectorIntrinsicWithStructReturnOverloadAtField(VectorIntrinsicID, | |
| Idx, State.TTI)) | |
| TysForDecl.push_back(Ty); | |
| } | |
| } | |
| SmallVector<Value *, 4> Args; | |
| for (const auto &I : enumerate(operands())) { | |
| // Some intrinsics have a scalar argument - don't replace it with a | |
| // vector. | |
| Value *Arg; | |
| if (isVectorIntrinsicWithScalarOpAtArg(VectorIntrinsicID, I.index(), | |
| State.TTI)) | |
| Arg = State.get(I.value(), VPLane(0)); | |
| else | |
| Arg = State.get(I.value(), usesFirstLaneOnly(I.value())); | |
| if (isVectorIntrinsicWithOverloadTypeAtArg(VectorIntrinsicID, I.index(), | |
| State.TTI)) | |
| TysForDecl.push_back(Arg->getType()); | |
| Args.push_back(Arg); | |
| } | |
| // Use vector version of the intrinsic. | |
| Module *M = State.Builder.GetInsertBlock()->getModule(); | |
| Function *VectorF = | |
| Intrinsic::getOrInsertDeclaration(M, VectorIntrinsicID, TysForDecl); | |
| assert(VectorF && | |
| "Can't retrieve vector intrinsic or vector-predication intrinsics."); | |
| auto *CI = cast_or_null<CallInst>(getUnderlyingValue()); | |
| SmallVector<OperandBundleDef, 1> OpBundles; | |
| if (CI) | |
| CI->getOperandBundlesAsDefs(OpBundles); | |
| CallInst *V = State.Builder.CreateCall(VectorF, Args, OpBundles); | |
| applyFlags(*V); | |
| applyMetadata(*V); | |
| if (!V->getType()->isVoidTy()) | |
| State.set(this, V); | |
| } | |
| /// Compute the cost for the intrinsic \p ID with \p Operands, produced by \p R. | |
| static InstructionCost getCostForIntrinsics(Intrinsic::ID ID, | |
| ArrayRef<const VPValue *> Operands, | |
| const VPRecipeWithIRFlags &R, | |
| ElementCount VF, | |
| VPCostContext &Ctx) { | |
| Type *ScalarRetTy = Ctx.Types.inferScalarType(&R); | |
| // Skip the reverse operation cost for the mask. | |
| // FIXME: Remove this once redundant mask reverse operations can be eliminated | |
| // by VPlanTransforms::cse before cost computation. | |
| if (ID == Intrinsic::experimental_vp_reverse && ScalarRetTy->isIntegerTy(1)) | |
| return InstructionCost(0); | |
| // Some backends analyze intrinsic arguments to determine cost. Use the | |
| // underlying value for the operand if it has one. Otherwise try to use the | |
| // operand of the underlying call instruction, if there is one. Otherwise | |
| // clear Arguments. | |
| // TODO: Rework TTI interface to be independent of concrete IR values. | |
| SmallVector<const Value *> Arguments; | |
| for (const auto &[Idx, Op] : enumerate(Operands)) { | |
| auto *V = Op->getUnderlyingValue(); | |
| if (!V) { | |
| if (auto *UI = dyn_cast_or_null<CallBase>(R.getUnderlyingValue())) { | |
| Arguments.push_back(UI->getArgOperand(Idx)); | |
| continue; | |
| } | |
| Arguments.clear(); | |
| break; | |
| } | |
| Arguments.push_back(V); | |
| } | |
| Type *RetTy = VF.isVector() ? toVectorizedTy(ScalarRetTy, VF) : ScalarRetTy; | |
| SmallVector<Type *> ParamTys = | |
| map_to_vector(Operands, [&](const VPValue *Op) { | |
| return toVectorTy(Ctx.Types.inferScalarType(Op), VF); | |
| }); | |
| // TODO: Rework TTI interface to avoid reliance on underlying IntrinsicInst. | |
| IntrinsicCostAttributes CostAttrs( | |
| ID, RetTy, Arguments, ParamTys, R.getFastMathFlags(), | |
| dyn_cast_or_null<IntrinsicInst>(R.getUnderlyingValue()), | |
| InstructionCost::getInvalid()); | |
| return Ctx.TTI.getIntrinsicInstrCost(CostAttrs, Ctx.CostKind); | |
| } | |
| InstructionCost VPWidenIntrinsicRecipe::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| SmallVector<const VPValue *> ArgOps(operands()); | |
| return getCostForIntrinsics(VectorIntrinsicID, ArgOps, *this, VF, Ctx); | |
| } | |
| StringRef VPWidenIntrinsicRecipe::getIntrinsicName() const { | |
| return Intrinsic::getBaseName(VectorIntrinsicID); | |
| } | |
| bool VPWidenIntrinsicRecipe::usesFirstLaneOnly(const VPValue *Op) const { | |
| assert(is_contained(operands(), Op) && "Op must be an operand of the recipe"); | |
| return all_of(enumerate(operands()), [this, &Op](const auto &X) { | |
| auto [Idx, V] = X; | |
| return V != Op || isVectorIntrinsicWithScalarOpAtArg(getVectorIntrinsicID(), | |
| Idx, nullptr); | |
| }); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPWidenIntrinsicRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "WIDEN-INTRINSIC "; | |
| if (ResultTy->isVoidTy()) { | |
| O << "void "; | |
| } else { | |
| printAsOperand(O, SlotTracker); | |
| O << " = "; | |
| } | |
| O << "call"; | |
| printFlags(O); | |
| O << getIntrinsicName() << "("; | |
| interleaveComma(operands(), O, [&O, &SlotTracker](VPValue *Op) { | |
| Op->printAsOperand(O, SlotTracker); | |
| }); | |
| O << ")"; | |
| } | |
| #endif | |
| void VPHistogramRecipe::execute(VPTransformState &State) { | |
| IRBuilderBase &Builder = State.Builder; | |
| Value *Address = State.get(getOperand(0)); | |
| Value *IncAmt = State.get(getOperand(1), /*IsScalar=*/true); | |
| VectorType *VTy = cast<VectorType>(Address->getType()); | |
| // The histogram intrinsic requires a mask even if the recipe doesn't; | |
| // if the mask operand was omitted then all lanes should be executed and | |
| // we just need to synthesize an all-true mask. | |
| Value *Mask = nullptr; | |
| if (VPValue *VPMask = getMask()) | |
| Mask = State.get(VPMask); | |
| else | |
| Mask = | |
| Builder.CreateVectorSplat(VTy->getElementCount(), Builder.getInt1(1)); | |
| // If this is a subtract, we want to invert the increment amount. We may | |
| // add a separate intrinsic in future, but for now we'll try this. | |
| if (Opcode == Instruction::Sub) | |
| IncAmt = Builder.CreateNeg(IncAmt); | |
| else | |
| assert(Opcode == Instruction::Add && "only add or sub supported for now"); | |
| State.Builder.CreateIntrinsic(Intrinsic::experimental_vector_histogram_add, | |
| {VTy, IncAmt->getType()}, | |
| {Address, IncAmt, Mask}); | |
| } | |
| InstructionCost VPHistogramRecipe::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| // FIXME: Take the gather and scatter into account as well. For now we're | |
| // generating the same cost as the fallback path, but we'll likely | |
| // need to create a new TTI method for determining the cost, including | |
| // whether we can use base + vec-of-smaller-indices or just | |
| // vec-of-pointers. | |
| assert(VF.isVector() && "Invalid VF for histogram cost"); | |
| Type *AddressTy = Ctx.Types.inferScalarType(getOperand(0)); | |
| VPValue *IncAmt = getOperand(1); | |
| Type *IncTy = Ctx.Types.inferScalarType(IncAmt); | |
| VectorType *VTy = VectorType::get(IncTy, VF); | |
| // Assume that a non-constant update value (or a constant != 1) requires | |
| // a multiply, and add that into the cost. | |
| InstructionCost MulCost = | |
| Ctx.TTI.getArithmeticInstrCost(Instruction::Mul, VTy, Ctx.CostKind); | |
| if (match(IncAmt, m_One())) | |
| MulCost = TTI::TCC_Free; | |
| // Find the cost of the histogram operation itself. | |
| Type *PtrTy = VectorType::get(AddressTy, VF); | |
| Type *MaskTy = VectorType::get(Type::getInt1Ty(Ctx.LLVMCtx), VF); | |
| IntrinsicCostAttributes ICA(Intrinsic::experimental_vector_histogram_add, | |
| Type::getVoidTy(Ctx.LLVMCtx), | |
| {PtrTy, IncTy, MaskTy}); | |
| // Add the costs together with the add/sub operation. | |
| return Ctx.TTI.getIntrinsicInstrCost(ICA, Ctx.CostKind) + MulCost + | |
| Ctx.TTI.getArithmeticInstrCost(Opcode, VTy, Ctx.CostKind); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPHistogramRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "WIDEN-HISTOGRAM buckets: "; | |
| getOperand(0)->printAsOperand(O, SlotTracker); | |
| if (Opcode == Instruction::Sub) | |
| O << ", dec: "; | |
| else { | |
| assert(Opcode == Instruction::Add); | |
| O << ", inc: "; | |
| } | |
| getOperand(1)->printAsOperand(O, SlotTracker); | |
| if (VPValue *Mask = getMask()) { | |
| O << ", mask: "; | |
| Mask->printAsOperand(O, SlotTracker); | |
| } | |
| } | |
| #endif | |
| VPIRFlags::FastMathFlagsTy::FastMathFlagsTy(const FastMathFlags &FMF) { | |
| AllowReassoc = FMF.allowReassoc(); | |
| NoNaNs = FMF.noNaNs(); | |
| NoInfs = FMF.noInfs(); | |
| NoSignedZeros = FMF.noSignedZeros(); | |
| AllowReciprocal = FMF.allowReciprocal(); | |
| AllowContract = FMF.allowContract(); | |
| ApproxFunc = FMF.approxFunc(); | |
| } | |
| VPIRFlags VPIRFlags::getDefaultFlags(unsigned Opcode) { | |
| switch (Opcode) { | |
| case Instruction::Add: | |
| case Instruction::Sub: | |
| case Instruction::Mul: | |
| case Instruction::Shl: | |
| case VPInstruction::CanonicalIVIncrementForPart: | |
| return WrapFlagsTy(false, false); | |
| case Instruction::Trunc: | |
| return TruncFlagsTy(false, false); | |
| case Instruction::Or: | |
| return DisjointFlagsTy(false); | |
| case Instruction::AShr: | |
| case Instruction::LShr: | |
| case Instruction::UDiv: | |
| case Instruction::SDiv: | |
| return ExactFlagsTy(false); | |
| case Instruction::GetElementPtr: | |
| case VPInstruction::PtrAdd: | |
| case VPInstruction::WidePtrAdd: | |
| return GEPNoWrapFlags::none(); | |
| case Instruction::ZExt: | |
| case Instruction::UIToFP: | |
| return NonNegFlagsTy(false); | |
| case Instruction::FAdd: | |
| case Instruction::FSub: | |
| case Instruction::FMul: | |
| case Instruction::FDiv: | |
| case Instruction::FRem: | |
| case Instruction::FNeg: | |
| case Instruction::FPExt: | |
| case Instruction::FPTrunc: | |
| return FastMathFlags(); | |
| case Instruction::ICmp: | |
| case Instruction::FCmp: | |
| case VPInstruction::ComputeReductionResult: | |
| llvm_unreachable("opcode requires explicit flags"); | |
| default: | |
| return VPIRFlags(); | |
| } | |
| } | |
| #if !defined(NDEBUG) | |
| bool VPIRFlags::flagsValidForOpcode(unsigned Opcode) const { | |
| switch (OpType) { | |
| case OperationType::OverflowingBinOp: | |
| return Opcode == Instruction::Add || Opcode == Instruction::Sub || | |
| Opcode == Instruction::Mul || Opcode == Instruction::Shl || | |
| Opcode == VPInstruction::VPInstruction::CanonicalIVIncrementForPart; | |
| case OperationType::Trunc: | |
| return Opcode == Instruction::Trunc; | |
| case OperationType::DisjointOp: | |
| return Opcode == Instruction::Or; | |
| case OperationType::PossiblyExactOp: | |
| return Opcode == Instruction::AShr || Opcode == Instruction::LShr || | |
| Opcode == Instruction::UDiv || Opcode == Instruction::SDiv; | |
| case OperationType::GEPOp: | |
| return Opcode == Instruction::GetElementPtr || | |
| Opcode == VPInstruction::PtrAdd || | |
| Opcode == VPInstruction::WidePtrAdd; | |
| case OperationType::FPMathOp: | |
| return Opcode == Instruction::Call || Opcode == Instruction::FAdd || | |
| Opcode == Instruction::FMul || Opcode == Instruction::FSub || | |
| Opcode == Instruction::FNeg || Opcode == Instruction::FDiv || | |
| Opcode == Instruction::FRem || Opcode == Instruction::FPExt || | |
| Opcode == Instruction::FPTrunc || Opcode == Instruction::PHI || | |
| Opcode == Instruction::Select || | |
| Opcode == VPInstruction::WideIVStep || | |
| Opcode == VPInstruction::ReductionStartVector; | |
| case OperationType::FCmp: | |
| return Opcode == Instruction::FCmp; | |
| case OperationType::NonNegOp: | |
| return Opcode == Instruction::ZExt || Opcode == Instruction::UIToFP; | |
| case OperationType::Cmp: | |
| return Opcode == Instruction::FCmp || Opcode == Instruction::ICmp; | |
| case OperationType::ReductionOp: | |
| return Opcode == VPInstruction::ComputeReductionResult; | |
| case OperationType::Other: | |
| return true; | |
| } | |
| llvm_unreachable("Unknown OperationType enum"); | |
| } | |
| bool VPIRFlags::hasRequiredFlagsForOpcode(unsigned Opcode) const { | |
| // Handle opcodes without default flags. | |
| if (Opcode == Instruction::ICmp) | |
| return OpType == OperationType::Cmp; | |
| if (Opcode == Instruction::FCmp) | |
| return OpType == OperationType::FCmp; | |
| if (Opcode == VPInstruction::ComputeReductionResult) | |
| return OpType == OperationType::ReductionOp; | |
| OperationType Required = getDefaultFlags(Opcode).OpType; | |
| return Required == OperationType::Other || Required == OpType; | |
| } | |
| #endif | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPIRFlags::printFlags(raw_ostream &O) const { | |
| switch (OpType) { | |
| case OperationType::Cmp: | |
| O << " " << CmpInst::getPredicateName(getPredicate()); | |
| break; | |
| case OperationType::FCmp: | |
| O << " " << CmpInst::getPredicateName(getPredicate()); | |
| getFastMathFlags().print(O); | |
| break; | |
| case OperationType::DisjointOp: | |
| if (DisjointFlags.IsDisjoint) | |
| O << " disjoint"; | |
| break; | |
| case OperationType::PossiblyExactOp: | |
| if (ExactFlags.IsExact) | |
| O << " exact"; | |
| break; | |
| case OperationType::OverflowingBinOp: | |
| if (WrapFlags.HasNUW) | |
| O << " nuw"; | |
| if (WrapFlags.HasNSW) | |
| O << " nsw"; | |
| break; | |
| case OperationType::Trunc: | |
| if (TruncFlags.HasNUW) | |
| O << " nuw"; | |
| if (TruncFlags.HasNSW) | |
| O << " nsw"; | |
| break; | |
| case OperationType::FPMathOp: | |
| getFastMathFlags().print(O); | |
| break; | |
| case OperationType::GEPOp: { | |
| GEPNoWrapFlags Flags = getGEPNoWrapFlags(); | |
| if (Flags.isInBounds()) | |
| O << " inbounds"; | |
| else if (Flags.hasNoUnsignedSignedWrap()) | |
| O << " nusw"; | |
| if (Flags.hasNoUnsignedWrap()) | |
| O << " nuw"; | |
| break; | |
| } | |
| case OperationType::NonNegOp: | |
| if (NonNegFlags.NonNeg) | |
| O << " nneg"; | |
| break; | |
| case OperationType::ReductionOp: { | |
| RecurKind RK = getRecurKind(); | |
| O << " ("; | |
| switch (RK) { | |
| case RecurKind::AnyOf: | |
| O << "any-of"; | |
| break; | |
| case RecurKind::FindLast: | |
| O << "find-last"; | |
| break; | |
| case RecurKind::SMax: | |
| O << "smax"; | |
| break; | |
| case RecurKind::SMin: | |
| O << "smin"; | |
| break; | |
| case RecurKind::UMax: | |
| O << "umax"; | |
| break; | |
| case RecurKind::UMin: | |
| O << "umin"; | |
| break; | |
| case RecurKind::FMinNum: | |
| O << "fminnum"; | |
| break; | |
| case RecurKind::FMaxNum: | |
| O << "fmaxnum"; | |
| break; | |
| case RecurKind::FMinimum: | |
| O << "fminimum"; | |
| break; | |
| case RecurKind::FMaximum: | |
| O << "fmaximum"; | |
| break; | |
| case RecurKind::FMinimumNum: | |
| O << "fminimumnum"; | |
| break; | |
| case RecurKind::FMaximumNum: | |
| O << "fmaximumnum"; | |
| break; | |
| default: | |
| O << Instruction::getOpcodeName(RecurrenceDescriptor::getOpcode(RK)); | |
| break; | |
| } | |
| if (isReductionInLoop()) | |
| O << ", in-loop"; | |
| if (isReductionOrdered()) | |
| O << ", ordered"; | |
| O << ")"; | |
| getFastMathFlags().print(O); | |
| break; | |
| } | |
| case OperationType::Other: | |
| break; | |
| } | |
| O << " "; | |
| } | |
| #endif | |
| void VPWidenRecipe::execute(VPTransformState &State) { | |
| auto &Builder = State.Builder; | |
| switch (Opcode) { | |
| case Instruction::Call: | |
| case Instruction::UncondBr: | |
| case Instruction::CondBr: | |
| case Instruction::PHI: | |
| case Instruction::GetElementPtr: | |
| llvm_unreachable("This instruction is handled by a different recipe."); | |
| case Instruction::UDiv: | |
| case Instruction::SDiv: | |
| case Instruction::SRem: | |
| case Instruction::URem: | |
| case Instruction::Add: | |
| case Instruction::FAdd: | |
| case Instruction::Sub: | |
| case Instruction::FSub: | |
| case Instruction::FNeg: | |
| case Instruction::Mul: | |
| case Instruction::FMul: | |
| case Instruction::FDiv: | |
| case Instruction::FRem: | |
| case Instruction::Shl: | |
| case Instruction::LShr: | |
| case Instruction::AShr: | |
| case Instruction::And: | |
| case Instruction::Or: | |
| case Instruction::Xor: { | |
| // Just widen unops and binops. | |
| SmallVector<Value *, 2> Ops; | |
| for (VPValue *VPOp : operands()) | |
| Ops.push_back(State.get(VPOp)); | |
| Value *V = Builder.CreateNAryOp(Opcode, Ops); | |
| if (auto *VecOp = dyn_cast<Instruction>(V)) { | |
| applyFlags(*VecOp); | |
| applyMetadata(*VecOp); | |
| } | |
| // Use this vector value for all users of the original instruction. | |
| State.set(this, V); | |
| break; | |
| } | |
| case Instruction::ExtractValue: { | |
| assert(getNumOperands() == 2 && "expected single level extractvalue"); | |
| Value *Op = State.get(getOperand(0)); | |
| Value *Extract = Builder.CreateExtractValue( | |
| Op, cast<VPConstantInt>(getOperand(1))->getZExtValue()); | |
| State.set(this, Extract); | |
| break; | |
| } | |
| case Instruction::Freeze: { | |
| Value *Op = State.get(getOperand(0)); | |
| Value *Freeze = Builder.CreateFreeze(Op); | |
| State.set(this, Freeze); | |
| break; | |
| } | |
| case Instruction::ICmp: | |
| case Instruction::FCmp: { | |
| // Widen compares. Generate vector compares. | |
| bool FCmp = Opcode == Instruction::FCmp; | |
| Value *A = State.get(getOperand(0)); | |
| Value *B = State.get(getOperand(1)); | |
| Value *C = nullptr; | |
| if (FCmp) { | |
| C = Builder.CreateFCmp(getPredicate(), A, B); | |
| } else { | |
| C = Builder.CreateICmp(getPredicate(), A, B); | |
| } | |
| if (auto *I = dyn_cast<Instruction>(C)) { | |
| applyFlags(*I); | |
| applyMetadata(*I); | |
| } | |
| State.set(this, C); | |
| break; | |
| } | |
| case Instruction::Select: { | |
| VPValue *CondOp = getOperand(0); | |
| Value *Cond = State.get(CondOp, vputils::isSingleScalar(CondOp)); | |
| Value *Op0 = State.get(getOperand(1)); | |
| Value *Op1 = State.get(getOperand(2)); | |
| Value *Sel = State.Builder.CreateSelect(Cond, Op0, Op1); | |
| State.set(this, Sel); | |
| if (auto *I = dyn_cast<Instruction>(Sel)) { | |
| if (isa<FPMathOperator>(I)) | |
| applyFlags(*I); | |
| applyMetadata(*I); | |
| } | |
| break; | |
| } | |
| default: | |
| // This instruction is not vectorized by simple widening. | |
| LLVM_DEBUG(dbgs() << "LV: Found an unhandled opcode : " | |
| << Instruction::getOpcodeName(Opcode)); | |
| llvm_unreachable("Unhandled instruction!"); | |
| } // end of switch. | |
| #if !defined(NDEBUG) | |
| // Verify that VPlan type inference results agree with the type of the | |
| // generated values. | |
| assert(VectorType::get(State.TypeAnalysis.inferScalarType(this), State.VF) == | |
| State.get(this)->getType() && | |
| "inferred type and type from generated instructions do not match"); | |
| #endif | |
| } | |
| InstructionCost VPWidenRecipe::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| switch (Opcode) { | |
| case Instruction::UDiv: | |
| case Instruction::SDiv: | |
| case Instruction::SRem: | |
| case Instruction::URem: | |
| // If the div/rem operation isn't safe to speculate and requires | |
| // predication, then the only way we can even create a vplan is to insert | |
| // a select on the second input operand to ensure we use the value of 1 | |
| // for the inactive lanes. The select will be costed separately. | |
| case Instruction::FNeg: | |
| case Instruction::Add: | |
| case Instruction::FAdd: | |
| case Instruction::Sub: | |
| case Instruction::FSub: | |
| case Instruction::Mul: | |
| case Instruction::FMul: | |
| case Instruction::FDiv: | |
| case Instruction::FRem: | |
| case Instruction::Shl: | |
| case Instruction::LShr: | |
| case Instruction::AShr: | |
| case Instruction::And: | |
| case Instruction::Or: | |
| case Instruction::Xor: | |
| case Instruction::Freeze: | |
| case Instruction::ExtractValue: | |
| case Instruction::ICmp: | |
| case Instruction::FCmp: | |
| case Instruction::Select: | |
| return getCostForRecipeWithOpcode(getOpcode(), VF, Ctx); | |
| default: | |
| llvm_unreachable("Unsupported opcode for instruction"); | |
| } | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPWidenRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "WIDEN "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = " << Instruction::getOpcodeName(Opcode); | |
| printFlags(O); | |
| printOperands(O, SlotTracker); | |
| } | |
| #endif | |
| void VPWidenCastRecipe::execute(VPTransformState &State) { | |
| auto &Builder = State.Builder; | |
| /// Vectorize casts. | |
| assert(State.VF.isVector() && "Not vectorizing?"); | |
| Type *DestTy = VectorType::get(getResultType(), State.VF); | |
| VPValue *Op = getOperand(0); | |
| Value *A = State.get(Op); | |
| Value *Cast = Builder.CreateCast(Instruction::CastOps(Opcode), A, DestTy); | |
| State.set(this, Cast); | |
| if (auto *CastOp = dyn_cast<Instruction>(Cast)) { | |
| applyFlags(*CastOp); | |
| applyMetadata(*CastOp); | |
| } | |
| } | |
| InstructionCost VPWidenCastRecipe::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| // TODO: In some cases, VPWidenCastRecipes are created but not considered in | |
| // the legacy cost model, including truncates/extends when evaluating a | |
| // reduction in a smaller type. | |
| if (!getUnderlyingValue()) | |
| return 0; | |
| return getCostForRecipeWithOpcode(getOpcode(), VF, Ctx); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPWidenCastRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "WIDEN-CAST "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = " << Instruction::getOpcodeName(Opcode); | |
| printFlags(O); | |
| printOperands(O, SlotTracker); | |
| O << " to " << *getResultType(); | |
| } | |
| #endif | |
| InstructionCost VPHeaderPHIRecipe::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| return Ctx.TTI.getCFInstrCost(Instruction::PHI, Ctx.CostKind); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPWidenIntOrFpInductionRecipe::printRecipe( | |
| raw_ostream &O, const Twine &Indent, VPSlotTracker &SlotTracker) const { | |
| O << Indent; | |
| printAsOperand(O, SlotTracker); | |
| O << " = WIDEN-INDUCTION"; | |
| printFlags(O); | |
| printOperands(O, SlotTracker); | |
| if (auto *TI = getTruncInst()) | |
| O << " (truncated to " << *TI->getType() << ")"; | |
| } | |
| #endif | |
| bool VPWidenIntOrFpInductionRecipe::isCanonical() const { | |
| // The step may be defined by a recipe in the preheader (e.g. if it requires | |
| // SCEV expansion), but for the canonical induction the step is required to be | |
| // 1, which is represented as live-in. | |
| return match(getStartValue(), m_ZeroInt()) && | |
| match(getStepValue(), m_One()) && | |
| getScalarType() == getRegion()->getCanonicalIVType(); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPDerivedIVRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent; | |
| printAsOperand(O, SlotTracker); | |
| O << " = DERIVED-IV "; | |
| getStartValue()->printAsOperand(O, SlotTracker); | |
| O << " + "; | |
| getOperand(1)->printAsOperand(O, SlotTracker); | |
| O << " * "; | |
| getStepValue()->printAsOperand(O, SlotTracker); | |
| } | |
| #endif | |
| void VPScalarIVStepsRecipe::execute(VPTransformState &State) { | |
| // Fast-math-flags propagate from the original induction instruction. | |
| IRBuilder<>::FastMathFlagGuard FMFG(State.Builder); | |
| State.Builder.setFastMathFlags(getFastMathFlags()); | |
| /// Compute scalar induction steps. \p ScalarIV is the scalar induction | |
| /// variable on which to base the steps, \p Step is the size of the step. | |
| Value *BaseIV = State.get(getOperand(0), VPLane(0)); | |
| Value *Step = State.get(getStepValue(), VPLane(0)); | |
| IRBuilderBase &Builder = State.Builder; | |
| // Ensure step has the same type as that of scalar IV. | |
| Type *BaseIVTy = BaseIV->getType()->getScalarType(); | |
| assert(BaseIVTy == Step->getType() && "Types of BaseIV and Step must match!"); | |
| // We build scalar steps for both integer and floating-point induction | |
| // variables. Here, we determine the kind of arithmetic we will perform. | |
| Instruction::BinaryOps AddOp; | |
| Instruction::BinaryOps MulOp; | |
| if (BaseIVTy->isIntegerTy()) { | |
| AddOp = Instruction::Add; | |
| MulOp = Instruction::Mul; | |
| } else { | |
| AddOp = InductionOpcode; | |
| MulOp = Instruction::FMul; | |
| } | |
| // Determine the number of scalars we need to generate. | |
| bool FirstLaneOnly = vputils::onlyFirstLaneUsed(this); | |
| // Compute the scalar steps and save the results in State. | |
| unsigned EndLane = FirstLaneOnly ? 1 : State.VF.getKnownMinValue(); | |
| assert(!State.Lane && "replicate regions must be dissolved before ::execute"); | |
| Value *StartIdx0 = getStartIndex() ? State.get(getStartIndex(), true) | |
| : Constant::getNullValue(BaseIVTy); | |
| for (unsigned Lane = 0; Lane < EndLane; ++Lane) { | |
| // It is okay if the induction variable type cannot hold the lane number, | |
| // we expect truncation in this case. | |
| Constant *LaneValue = | |
| BaseIVTy->isIntegerTy() | |
| ? ConstantInt::get(BaseIVTy, Lane, /*IsSigned=*/false, | |
| /*ImplicitTrunc=*/true) | |
| : ConstantFP::get(BaseIVTy, Lane); | |
| Value *StartIdx = Builder.CreateBinOp(AddOp, StartIdx0, LaneValue); | |
| assert((State.VF.isScalable() || isa<Constant>(StartIdx)) && | |
| "Expected StartIdx to be folded to a constant when VF is not " | |
| "scalable"); | |
| auto *Mul = Builder.CreateBinOp(MulOp, StartIdx, Step); | |
| auto *Add = Builder.CreateBinOp(AddOp, BaseIV, Mul); | |
| State.set(this, Add, VPLane(Lane)); | |
| } | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPScalarIVStepsRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent; | |
| printAsOperand(O, SlotTracker); | |
| O << " = SCALAR-STEPS "; | |
| printOperands(O, SlotTracker); | |
| } | |
| #endif | |
| bool VPWidenGEPRecipe::usesFirstLaneOnly(const VPValue *Op) const { | |
| assert(is_contained(operands(), Op) && "Op must be an operand of the recipe"); | |
| return vputils::isSingleScalar(Op); | |
| } | |
| void VPWidenGEPRecipe::execute(VPTransformState &State) { | |
| assert(State.VF.isVector() && "not widening"); | |
| // Construct a vector GEP by widening the operands of the scalar GEP as | |
| // necessary. We mark the vector GEP 'inbounds' if appropriate. A GEP | |
| // results in a vector of pointers when at least one operand of the GEP | |
| // is vector-typed. Thus, to keep the representation compact, we only use | |
| // vector-typed operands for loop-varying values. | |
| bool AllOperandsAreInvariant = all_of(operands(), [](VPValue *Op) { | |
| return Op->isDefinedOutsideLoopRegions(); | |
| }); | |
| if (AllOperandsAreInvariant) { | |
| // If we are vectorizing, but the GEP has only loop-invariant operands, | |
| // the GEP we build (by only using vector-typed operands for | |
| // loop-varying values) would be a scalar pointer. Thus, to ensure we | |
| // produce a vector of pointers, we need to either arbitrarily pick an | |
| // operand to broadcast, or broadcast a clone of the original GEP. | |
| // Here, we broadcast a clone of the original. | |
| SmallVector<Value *> Ops; | |
| for (unsigned I = 0, E = getNumOperands(); I != E; I++) | |
| Ops.push_back(State.get(getOperand(I), VPLane(0))); | |
| auto *NewGEP = | |
| State.Builder.CreateGEP(getSourceElementType(), Ops[0], drop_begin(Ops), | |
| "", getGEPNoWrapFlags()); | |
| Value *Splat = State.Builder.CreateVectorSplat(State.VF, NewGEP); | |
| State.set(this, Splat); | |
| return; | |
| } | |
| // If the GEP has at least one loop-varying operand, we are sure to | |
| // produce a vector of pointers unless VF is scalar. | |
| // The pointer operand of the new GEP. If it's loop-invariant, we | |
| // won't broadcast it. | |
| auto *Ptr = State.get(getOperand(0), isPointerLoopInvariant()); | |
| // Collect all the indices for the new GEP. If any index is | |
| // loop-invariant, we won't broadcast it. | |
| SmallVector<Value *, 4> Indices; | |
| for (unsigned I = 1, E = getNumOperands(); I < E; I++) { | |
| VPValue *Operand = getOperand(I); | |
| Indices.push_back(State.get(Operand, isIndexLoopInvariant(I - 1))); | |
| } | |
| // Create the new GEP. Note that this GEP may be a scalar if VF == 1, | |
| // but it should be a vector, otherwise. | |
| auto *NewGEP = State.Builder.CreateGEP(getSourceElementType(), Ptr, Indices, | |
| "", getGEPNoWrapFlags()); | |
| assert((State.VF.isScalar() || NewGEP->getType()->isVectorTy()) && | |
| "NewGEP is not a pointer vector"); | |
| State.set(this, NewGEP); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPWidenGEPRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "WIDEN-GEP "; | |
| O << (isPointerLoopInvariant() ? "Inv" : "Var"); | |
| for (size_t I = 0; I < getNumOperands() - 1; ++I) | |
| O << "[" << (isIndexLoopInvariant(I) ? "Inv" : "Var") << "]"; | |
| O << " "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = getelementptr"; | |
| printFlags(O); | |
| printOperands(O, SlotTracker); | |
| } | |
| #endif | |
| void VPVectorEndPointerRecipe::materializeOffset(unsigned Part) { | |
| assert(!getOffset() && "Unexpected offset operand"); | |
| VPBuilder Builder(this); | |
| VPlan &Plan = *getParent()->getPlan(); | |
| VPValue *VFVal = getVFValue(); | |
| VPTypeAnalysis TypeInfo(Plan); | |
| const DataLayout &DL = Plan.getDataLayout(); | |
| Type *IndexTy = DL.getIndexType(TypeInfo.inferScalarType(this)); | |
| VPValue *Stride = | |
| Plan.getConstantInt(IndexTy, getStride(), /*IsSigned=*/true); | |
| Type *VFTy = TypeInfo.inferScalarType(VFVal); | |
| VPValue *VF = Builder.createScalarZExtOrTrunc(VFVal, IndexTy, VFTy, | |
| DebugLoc::getUnknown()); | |
| // Offset for Part0 = Offset0 = Stride * (VF - 1). | |
| VPInstruction *VFMinusOne = | |
| Builder.createSub(VF, Plan.getConstantInt(IndexTy, 1u), | |
| DebugLoc::getUnknown(), "", {true, true}); | |
| VPInstruction *Offset0 = | |
| Builder.createOverflowingOp(Instruction::Mul, {VFMinusOne, Stride}); | |
| // Offset for PartN = Offset0 + Part * Stride * VF. | |
| VPValue *PartxStride = | |
| Plan.getConstantInt(IndexTy, Part * getStride(), /*IsSigned=*/true); | |
| VPValue *Offset = Builder.createAdd( | |
| Offset0, | |
| Builder.createOverflowingOp(Instruction::Mul, {PartxStride, VF})); | |
| addOperand(Offset); | |
| } | |
| void VPVectorEndPointerRecipe::execute(VPTransformState &State) { | |
| auto &Builder = State.Builder; | |
| assert(getOffset() && "Expected prior materialization of offset"); | |
| Value *Ptr = State.get(getPointer(), true); | |
| Value *Offset = State.get(getOffset(), true); | |
| Value *ResultPtr = Builder.CreateGEP(getSourceElementType(), Ptr, Offset, "", | |
| getGEPNoWrapFlags()); | |
| State.set(this, ResultPtr, /*IsScalar*/ true); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPVectorEndPointerRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent; | |
| printAsOperand(O, SlotTracker); | |
| O << " = vector-end-pointer"; | |
| printFlags(O); | |
| printOperands(O, SlotTracker); | |
| } | |
| #endif | |
| void VPVectorPointerRecipe::execute(VPTransformState &State) { | |
| auto &Builder = State.Builder; | |
| assert(getOffset() && | |
| "Expected prior simplification of recipe without offset"); | |
| Value *Ptr = State.get(getOperand(0), VPLane(0)); | |
| Value *Offset = State.get(getOffset(), true); | |
| Value *ResultPtr = Builder.CreateGEP(getSourceElementType(), Ptr, Offset, "", | |
| getGEPNoWrapFlags()); | |
| State.set(this, ResultPtr, /*IsScalar*/ true); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPVectorPointerRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent; | |
| printAsOperand(O, SlotTracker); | |
| O << " = vector-pointer"; | |
| printFlags(O); | |
| printOperands(O, SlotTracker); | |
| } | |
| #endif | |
| InstructionCost VPBlendRecipe::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| // A blend will be expanded to a select VPInstruction, which will generate a | |
| // scalar select if only the first lane is used. | |
| if (vputils::onlyFirstLaneUsed(this)) | |
| VF = ElementCount::getFixed(1); | |
| Type *ResultTy = toVectorTy(Ctx.Types.inferScalarType(this), VF); | |
| Type *CmpTy = toVectorTy(Type::getInt1Ty(Ctx.Types.getContext()), VF); | |
| return (getNumIncomingValues() - 1) * | |
| Ctx.TTI.getCmpSelInstrCost(Instruction::Select, ResultTy, CmpTy, | |
| CmpInst::BAD_ICMP_PREDICATE, Ctx.CostKind); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPBlendRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "BLEND "; | |
| printAsOperand(O, SlotTracker); | |
| O << " ="; | |
| printFlags(O); | |
| if (getNumIncomingValues() == 1) { | |
| // Not a User of any mask: not really blending, this is a | |
| // single-predecessor phi. | |
| getIncomingValue(0)->printAsOperand(O, SlotTracker); | |
| } else { | |
| for (unsigned I = 0, E = getNumIncomingValues(); I < E; ++I) { | |
| if (I != 0) | |
| O << " "; | |
| getIncomingValue(I)->printAsOperand(O, SlotTracker); | |
| if (I == 0 && isNormalized()) | |
| continue; | |
| O << "/"; | |
| getMask(I)->printAsOperand(O, SlotTracker); | |
| } | |
| } | |
| } | |
| #endif | |
| void VPReductionRecipe::execute(VPTransformState &State) { | |
| assert(!State.Lane && "Reduction being replicated."); | |
| RecurKind Kind = getRecurrenceKind(); | |
| assert(!RecurrenceDescriptor::isAnyOfRecurrenceKind(Kind) && | |
| "In-loop AnyOf reductions aren't currently supported"); | |
| // Propagate the fast-math flags carried by the underlying instruction. | |
| IRBuilderBase::FastMathFlagGuard FMFGuard(State.Builder); | |
| State.Builder.setFastMathFlags(getFastMathFlags()); | |
| Value *NewVecOp = State.get(getVecOp()); | |
| if (VPValue *Cond = getCondOp()) { | |
| Value *NewCond = State.get(Cond, State.VF.isScalar()); | |
| VectorType *VecTy = dyn_cast<VectorType>(NewVecOp->getType()); | |
| Type *ElementTy = VecTy ? VecTy->getElementType() : NewVecOp->getType(); | |
| Value *Start = getRecurrenceIdentity(Kind, ElementTy, getFastMathFlags()); | |
| if (State.VF.isVector()) | |
| Start = State.Builder.CreateVectorSplat(VecTy->getElementCount(), Start); | |
| Value *Select = State.Builder.CreateSelect(NewCond, NewVecOp, Start); | |
| NewVecOp = Select; | |
| } | |
| Value *NewRed; | |
| Value *NextInChain; | |
| if (isOrdered()) { | |
| Value *PrevInChain = State.get(getChainOp(), /*IsScalar*/ true); | |
| if (State.VF.isVector()) | |
| NewRed = | |
| createOrderedReduction(State.Builder, Kind, NewVecOp, PrevInChain); | |
| else | |
| NewRed = State.Builder.CreateBinOp( | |
| (Instruction::BinaryOps)RecurrenceDescriptor::getOpcode(Kind), | |
| PrevInChain, NewVecOp); | |
| PrevInChain = NewRed; | |
| NextInChain = NewRed; | |
| } else if (isPartialReduction()) { | |
| assert((Kind == RecurKind::Add || Kind == RecurKind::FAdd) && | |
| "Unexpected partial reduction kind"); | |
| Value *PrevInChain = State.get(getChainOp(), /*IsScalar*/ false); | |
| NewRed = State.Builder.CreateIntrinsic( | |
| PrevInChain->getType(), | |
| Kind == RecurKind::Add ? Intrinsic::vector_partial_reduce_add | |
| : Intrinsic::vector_partial_reduce_fadd, | |
| {PrevInChain, NewVecOp}, State.Builder.getFastMathFlags(), | |
| "partial.reduce"); | |
| PrevInChain = NewRed; | |
| NextInChain = NewRed; | |
| } else { | |
| assert(isInLoop() && | |
| "The reduction must either be ordered, partial or in-loop"); | |
| Value *PrevInChain = State.get(getChainOp(), /*IsScalar*/ true); | |
| NewRed = createSimpleReduction(State.Builder, NewVecOp, Kind); | |
| if (RecurrenceDescriptor::isMinMaxRecurrenceKind(Kind)) | |
| NextInChain = createMinMaxOp(State.Builder, Kind, NewRed, PrevInChain); | |
| else | |
| NextInChain = State.Builder.CreateBinOp( | |
| (Instruction::BinaryOps)RecurrenceDescriptor::getOpcode(Kind), | |
| PrevInChain, NewRed); | |
| } | |
| State.set(this, NextInChain, /*IsScalar*/ !isPartialReduction()); | |
| } | |
| void VPReductionEVLRecipe::execute(VPTransformState &State) { | |
| assert(!State.Lane && "Reduction being replicated."); | |
| auto &Builder = State.Builder; | |
| // Propagate the fast-math flags carried by the underlying instruction. | |
| IRBuilderBase::FastMathFlagGuard FMFGuard(Builder); | |
| Builder.setFastMathFlags(getFastMathFlags()); | |
| RecurKind Kind = getRecurrenceKind(); | |
| Value *Prev = State.get(getChainOp(), /*IsScalar*/ true); | |
| Value *VecOp = State.get(getVecOp()); | |
| Value *EVL = State.get(getEVL(), VPLane(0)); | |
| Value *Mask; | |
| if (VPValue *CondOp = getCondOp()) | |
| Mask = State.get(CondOp); | |
| else | |
| Mask = Builder.CreateVectorSplat(State.VF, Builder.getTrue()); | |
| Value *NewRed; | |
| if (isOrdered()) { | |
| NewRed = createOrderedReduction(Builder, Kind, VecOp, Prev, Mask, EVL); | |
| } else { | |
| NewRed = createSimpleReduction(Builder, VecOp, Kind, Mask, EVL); | |
| if (RecurrenceDescriptor::isMinMaxRecurrenceKind(Kind)) | |
| NewRed = createMinMaxOp(Builder, Kind, NewRed, Prev); | |
| else | |
| NewRed = Builder.CreateBinOp( | |
| (Instruction::BinaryOps)RecurrenceDescriptor::getOpcode(Kind), NewRed, | |
| Prev); | |
| } | |
| State.set(this, NewRed, /*IsScalar*/ true); | |
| } | |
| InstructionCost VPReductionRecipe::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| RecurKind RdxKind = getRecurrenceKind(); | |
| Type *ElementTy = Ctx.Types.inferScalarType(this); | |
| auto *VectorTy = cast<VectorType>(toVectorTy(ElementTy, VF)); | |
| unsigned Opcode = RecurrenceDescriptor::getOpcode(RdxKind); | |
| FastMathFlags FMFs = getFastMathFlags(); | |
| std::optional<FastMathFlags> OptionalFMF = | |
| ElementTy->isFloatingPointTy() ? std::make_optional(FMFs) : std::nullopt; | |
| if (isPartialReduction()) { | |
| InstructionCost CondCost = 0; | |
| if (isConditional()) { | |
| CmpInst::Predicate Pred = CmpInst::BAD_ICMP_PREDICATE; | |
| auto *CondTy = cast<VectorType>( | |
| toVectorTy(Ctx.Types.inferScalarType(getCondOp()), VF)); | |
| CondCost = Ctx.TTI.getCmpSelInstrCost(Instruction::Select, VectorTy, | |
| CondTy, Pred, Ctx.CostKind); | |
| } | |
| return CondCost + Ctx.TTI.getPartialReductionCost( | |
| Opcode, ElementTy, ElementTy, ElementTy, VF, | |
| TTI::PR_None, TTI::PR_None, {}, Ctx.CostKind, | |
| OptionalFMF); | |
| } | |
| // TODO: Support any-of reductions. | |
| assert( | |
| (!RecurrenceDescriptor::isAnyOfRecurrenceKind(RdxKind) || | |
| ForceTargetInstructionCost.getNumOccurrences() > 0) && | |
| "Any-of reduction not implemented in VPlan-based cost model currently."); | |
| // Note that TTI should model the cost of moving result to the scalar register | |
| // and the BinOp cost in the getMinMaxReductionCost(). | |
| if (RecurrenceDescriptor::isMinMaxRecurrenceKind(RdxKind)) { | |
| Intrinsic::ID Id = getMinMaxReductionIntrinsicOp(RdxKind); | |
| return Ctx.TTI.getMinMaxReductionCost(Id, VectorTy, FMFs, Ctx.CostKind); | |
| } | |
| // Note that TTI should model the cost of moving result to the scalar register | |
| // and the BinOp cost in the getArithmeticReductionCost(). | |
| return Ctx.TTI.getArithmeticReductionCost(Opcode, VectorTy, OptionalFMF, | |
| Ctx.CostKind); | |
| } | |
| VPExpressionRecipe::VPExpressionRecipe( | |
| ExpressionTypes ExpressionType, | |
| ArrayRef<VPSingleDefRecipe *> ExpressionRecipes) | |
| : VPSingleDefRecipe(VPRecipeBase::VPExpressionSC, {}, {}), | |
| ExpressionRecipes(ExpressionRecipes), ExpressionType(ExpressionType) { | |
| assert(!ExpressionRecipes.empty() && "Nothing to combine?"); | |
| assert( | |
| none_of(ExpressionRecipes, | |
| [](VPSingleDefRecipe *R) { return R->mayHaveSideEffects(); }) && | |
| "expression cannot contain recipes with side-effects"); | |
| // Maintain a copy of the expression recipes as a set of users. | |
| SmallPtrSet<VPUser *, 4> ExpressionRecipesAsSetOfUsers; | |
| for (auto *R : ExpressionRecipes) | |
| ExpressionRecipesAsSetOfUsers.insert(R); | |
| // Recipes in the expression, except the last one, must only be used by | |
| // (other) recipes inside the expression. If there are other users, external | |
| // to the expression, use a clone of the recipe for external users. | |
| for (VPSingleDefRecipe *R : reverse(ExpressionRecipes)) { | |
| if (R != ExpressionRecipes.back() && | |
| any_of(R->users(), [&ExpressionRecipesAsSetOfUsers](VPUser *U) { | |
| return !ExpressionRecipesAsSetOfUsers.contains(U); | |
| })) { | |
| // There are users outside of the expression. Clone the recipe and use the | |
| // clone those external users. | |
| VPSingleDefRecipe *CopyForExtUsers = R->clone(); | |
| R->replaceUsesWithIf(CopyForExtUsers, [&ExpressionRecipesAsSetOfUsers]( | |
| VPUser &U, unsigned) { | |
| return !ExpressionRecipesAsSetOfUsers.contains(&U); | |
| }); | |
| CopyForExtUsers->insertBefore(R); | |
| } | |
| if (R->getParent()) | |
| R->removeFromParent(); | |
| } | |
| // Internalize all external operands to the expression recipes. To do so, | |
| // create new temporary VPValues for all operands defined by a recipe outside | |
| // the expression. The original operands are added as operands of the | |
| // VPExpressionRecipe itself. | |
| for (auto *R : ExpressionRecipes) { | |
| for (const auto &[Idx, Op] : enumerate(R->operands())) { | |
| auto *Def = Op->getDefiningRecipe(); | |
| if (Def && ExpressionRecipesAsSetOfUsers.contains(Def)) | |
| continue; | |
| addOperand(Op); | |
| LiveInPlaceholders.push_back(new VPSymbolicValue()); | |
| } | |
| } | |
| // Replace each external operand with the first one created for it in | |
| // LiveInPlaceholders. | |
| for (auto *R : ExpressionRecipes) | |
| for (auto const &[LiveIn, Tmp] : zip(operands(), LiveInPlaceholders)) | |
| R->replaceUsesOfWith(LiveIn, Tmp); | |
| } | |
| void VPExpressionRecipe::decompose() { | |
| for (auto *R : ExpressionRecipes) | |
| // Since the list could contain duplicates, make sure the recipe hasn't | |
| // already been inserted. | |
| if (!R->getParent()) | |
| R->insertBefore(this); | |
| for (const auto &[Idx, Op] : enumerate(operands())) | |
| LiveInPlaceholders[Idx]->replaceAllUsesWith(Op); | |
| replaceAllUsesWith(ExpressionRecipes.back()); | |
| ExpressionRecipes.clear(); | |
| } | |
| InstructionCost VPExpressionRecipe::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| Type *RedTy = Ctx.Types.inferScalarType(this); | |
| auto *SrcVecTy = cast<VectorType>( | |
| toVectorTy(Ctx.Types.inferScalarType(getOperand(0)), VF)); | |
| unsigned Opcode = RecurrenceDescriptor::getOpcode( | |
| cast<VPReductionRecipe>(ExpressionRecipes.back())->getRecurrenceKind()); | |
| switch (ExpressionType) { | |
| case ExpressionTypes::ExtendedReduction: { | |
| unsigned Opcode = RecurrenceDescriptor::getOpcode( | |
| cast<VPReductionRecipe>(ExpressionRecipes[1])->getRecurrenceKind()); | |
| auto *ExtR = cast<VPWidenCastRecipe>(ExpressionRecipes[0]); | |
| auto *RedR = cast<VPReductionRecipe>(ExpressionRecipes.back()); | |
| if (RedR->isPartialReduction()) | |
| return Ctx.TTI.getPartialReductionCost( | |
| Opcode, Ctx.Types.inferScalarType(getOperand(0)), nullptr, RedTy, VF, | |
| TargetTransformInfo::getPartialReductionExtendKind(ExtR->getOpcode()), | |
| TargetTransformInfo::PR_None, std::nullopt, Ctx.CostKind, | |
| RedTy->isFloatingPointTy() ? std::optional{RedR->getFastMathFlags()} | |
| : std::nullopt); | |
| else if (!RedTy->isFloatingPointTy()) | |
| // TTI::getExtendedReductionCost only supports integer types. | |
| return Ctx.TTI.getExtendedReductionCost( | |
| Opcode, ExtR->getOpcode() == Instruction::ZExt, RedTy, SrcVecTy, | |
| std::nullopt, Ctx.CostKind); | |
| else | |
| return InstructionCost::getInvalid(); | |
| } | |
| case ExpressionTypes::MulAccReduction: | |
| return Ctx.TTI.getMulAccReductionCost(false, Opcode, RedTy, SrcVecTy, | |
| Ctx.CostKind); | |
| case ExpressionTypes::ExtNegatedMulAccReduction: | |
| assert(Opcode == Instruction::Add && "Unexpected opcode"); | |
| Opcode = Instruction::Sub; | |
| [[fallthrough]]; | |
| case ExpressionTypes::ExtMulAccReduction: { | |
| auto *RedR = cast<VPReductionRecipe>(ExpressionRecipes.back()); | |
| if (RedR->isPartialReduction()) { | |
| auto *Ext0R = cast<VPWidenCastRecipe>(ExpressionRecipes[0]); | |
| auto *Ext1R = cast<VPWidenCastRecipe>(ExpressionRecipes[1]); | |
| auto *Mul = cast<VPWidenRecipe>(ExpressionRecipes[2]); | |
| return Ctx.TTI.getPartialReductionCost( | |
| Opcode, Ctx.Types.inferScalarType(getOperand(0)), | |
| Ctx.Types.inferScalarType(getOperand(1)), RedTy, VF, | |
| TargetTransformInfo::getPartialReductionExtendKind( | |
| Ext0R->getOpcode()), | |
| TargetTransformInfo::getPartialReductionExtendKind( | |
| Ext1R->getOpcode()), | |
| Mul->getOpcode(), Ctx.CostKind, | |
| RedTy->isFloatingPointTy() ? std::optional{RedR->getFastMathFlags()} | |
| : std::nullopt); | |
| } | |
| return Ctx.TTI.getMulAccReductionCost( | |
| cast<VPWidenCastRecipe>(ExpressionRecipes.front())->getOpcode() == | |
| Instruction::ZExt, | |
| Opcode, RedTy, SrcVecTy, Ctx.CostKind); | |
| } | |
| } | |
| llvm_unreachable("Unknown VPExpressionRecipe::ExpressionTypes enum"); | |
| } | |
| bool VPExpressionRecipe::mayReadOrWriteMemory() const { | |
| return any_of(ExpressionRecipes, [](VPSingleDefRecipe *R) { | |
| return R->mayReadFromMemory() || R->mayWriteToMemory(); | |
| }); | |
| } | |
| bool VPExpressionRecipe::mayHaveSideEffects() const { | |
| assert( | |
| none_of(ExpressionRecipes, | |
| [](VPSingleDefRecipe *R) { return R->mayHaveSideEffects(); }) && | |
| "expression cannot contain recipes with side-effects"); | |
| return false; | |
| } | |
| bool VPExpressionRecipe::isSingleScalar() const { | |
| // Cannot use vputils::isSingleScalar(), because all external operands | |
| // of the expression will be live-ins while bundled. | |
| auto *RR = dyn_cast<VPReductionRecipe>(ExpressionRecipes.back()); | |
| return RR && !RR->isPartialReduction(); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPExpressionRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "EXPRESSION "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = "; | |
| auto *Red = cast<VPReductionRecipe>(ExpressionRecipes.back()); | |
| unsigned Opcode = RecurrenceDescriptor::getOpcode(Red->getRecurrenceKind()); | |
| switch (ExpressionType) { | |
| case ExpressionTypes::ExtendedReduction: { | |
| getOperand(1)->printAsOperand(O, SlotTracker); | |
| O << " + " << (Red->isPartialReduction() ? "partial." : "") << "reduce."; | |
| O << Instruction::getOpcodeName(Opcode) << " ("; | |
| getOperand(0)->printAsOperand(O, SlotTracker); | |
| Red->printFlags(O); | |
| auto *Ext0 = cast<VPWidenCastRecipe>(ExpressionRecipes[0]); | |
| O << Instruction::getOpcodeName(Ext0->getOpcode()) << " to " | |
| << *Ext0->getResultType(); | |
| if (Red->isConditional()) { | |
| O << ", "; | |
| Red->getCondOp()->printAsOperand(O, SlotTracker); | |
| } | |
| O << ")"; | |
| break; | |
| } | |
| case ExpressionTypes::ExtNegatedMulAccReduction: { | |
| getOperand(getNumOperands() - 1)->printAsOperand(O, SlotTracker); | |
| O << " + " << (Red->isPartialReduction() ? "partial." : "") << "reduce."; | |
| O << Instruction::getOpcodeName( | |
| RecurrenceDescriptor::getOpcode(Red->getRecurrenceKind())) | |
| << " (sub (0, mul"; | |
| auto *Mul = cast<VPWidenRecipe>(ExpressionRecipes[2]); | |
| Mul->printFlags(O); | |
| O << "("; | |
| getOperand(0)->printAsOperand(O, SlotTracker); | |
| auto *Ext0 = cast<VPWidenCastRecipe>(ExpressionRecipes[0]); | |
| O << " " << Instruction::getOpcodeName(Ext0->getOpcode()) << " to " | |
| << *Ext0->getResultType() << "), ("; | |
| getOperand(1)->printAsOperand(O, SlotTracker); | |
| auto *Ext1 = cast<VPWidenCastRecipe>(ExpressionRecipes[1]); | |
| O << " " << Instruction::getOpcodeName(Ext1->getOpcode()) << " to " | |
| << *Ext1->getResultType() << ")"; | |
| if (Red->isConditional()) { | |
| O << ", "; | |
| Red->getCondOp()->printAsOperand(O, SlotTracker); | |
| } | |
| O << "))"; | |
| break; | |
| } | |
| case ExpressionTypes::MulAccReduction: | |
| case ExpressionTypes::ExtMulAccReduction: { | |
| getOperand(getNumOperands() - 1)->printAsOperand(O, SlotTracker); | |
| O << " + " << (Red->isPartialReduction() ? "partial." : "") << "reduce."; | |
| O << Instruction::getOpcodeName( | |
| RecurrenceDescriptor::getOpcode(Red->getRecurrenceKind())) | |
| << " ("; | |
| O << "mul"; | |
| bool IsExtended = ExpressionType == ExpressionTypes::ExtMulAccReduction; | |
| auto *Mul = cast<VPWidenRecipe>(IsExtended ? ExpressionRecipes[2] | |
| : ExpressionRecipes[0]); | |
| Mul->printFlags(O); | |
| if (IsExtended) | |
| O << "("; | |
| getOperand(0)->printAsOperand(O, SlotTracker); | |
| if (IsExtended) { | |
| auto *Ext0 = cast<VPWidenCastRecipe>(ExpressionRecipes[0]); | |
| O << " " << Instruction::getOpcodeName(Ext0->getOpcode()) << " to " | |
| << *Ext0->getResultType() << "), ("; | |
| } else { | |
| O << ", "; | |
| } | |
| getOperand(1)->printAsOperand(O, SlotTracker); | |
| if (IsExtended) { | |
| auto *Ext1 = cast<VPWidenCastRecipe>(ExpressionRecipes[1]); | |
| O << " " << Instruction::getOpcodeName(Ext1->getOpcode()) << " to " | |
| << *Ext1->getResultType() << ")"; | |
| } | |
| if (Red->isConditional()) { | |
| O << ", "; | |
| Red->getCondOp()->printAsOperand(O, SlotTracker); | |
| } | |
| O << ")"; | |
| break; | |
| } | |
| } | |
| } | |
| void VPReductionRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| if (isPartialReduction()) | |
| O << Indent << "PARTIAL-REDUCE "; | |
| else | |
| O << Indent << "REDUCE "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = "; | |
| getChainOp()->printAsOperand(O, SlotTracker); | |
| O << " +"; | |
| printFlags(O); | |
| O << " reduce." | |
| << Instruction::getOpcodeName( | |
| RecurrenceDescriptor::getOpcode(getRecurrenceKind())) | |
| << " ("; | |
| getVecOp()->printAsOperand(O, SlotTracker); | |
| if (isConditional()) { | |
| O << ", "; | |
| getCondOp()->printAsOperand(O, SlotTracker); | |
| } | |
| O << ")"; | |
| } | |
| void VPReductionEVLRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "REDUCE "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = "; | |
| getChainOp()->printAsOperand(O, SlotTracker); | |
| O << " +"; | |
| printFlags(O); | |
| O << " vp.reduce." | |
| << Instruction::getOpcodeName( | |
| RecurrenceDescriptor::getOpcode(getRecurrenceKind())) | |
| << " ("; | |
| getVecOp()->printAsOperand(O, SlotTracker); | |
| O << ", "; | |
| getEVL()->printAsOperand(O, SlotTracker); | |
| if (isConditional()) { | |
| O << ", "; | |
| getCondOp()->printAsOperand(O, SlotTracker); | |
| } | |
| O << ")"; | |
| } | |
| #endif | |
| /// A helper function to scalarize a single Instruction in the innermost loop. | |
| /// Generates a sequence of scalar instances for lane \p Lane. Uses the VPValue | |
| /// operands from \p RepRecipe instead of \p Instr's operands. | |
| static void scalarizeInstruction(const Instruction *Instr, | |
| VPReplicateRecipe *RepRecipe, | |
| const VPLane &Lane, VPTransformState &State) { | |
| assert((!Instr->getType()->isAggregateType() || | |
| canVectorizeTy(Instr->getType())) && | |
| "Expected vectorizable or non-aggregate type."); | |
| // Does this instruction return a value ? | |
| bool IsVoidRetTy = Instr->getType()->isVoidTy(); | |
| Instruction *Cloned = Instr->clone(); | |
| if (!IsVoidRetTy) { | |
| Cloned->setName(Instr->getName() + ".cloned"); | |
| Type *ResultTy = State.TypeAnalysis.inferScalarType(RepRecipe); | |
| // The operands of the replicate recipe may have been narrowed, resulting in | |
| // a narrower result type. Update the type of the cloned instruction to the | |
| // correct type. | |
| if (ResultTy != Cloned->getType()) | |
| Cloned->mutateType(ResultTy); | |
| } | |
| RepRecipe->applyFlags(*Cloned); | |
| RepRecipe->applyMetadata(*Cloned); | |
| if (RepRecipe->hasPredicate()) | |
| cast<CmpInst>(Cloned)->setPredicate(RepRecipe->getPredicate()); | |
| if (auto DL = RepRecipe->getDebugLoc()) | |
| State.setDebugLocFrom(DL); | |
| // Replace the operands of the cloned instructions with their scalar | |
| // equivalents in the new loop. | |
| for (const auto &I : enumerate(RepRecipe->operands())) { | |
| auto InputLane = Lane; | |
| VPValue *Operand = I.value(); | |
| if (vputils::isSingleScalar(Operand)) | |
| InputLane = VPLane::getFirstLane(); | |
| Cloned->setOperand(I.index(), State.get(Operand, InputLane)); | |
| } | |
| // Place the cloned scalar in the new loop. | |
| State.Builder.Insert(Cloned); | |
| State.set(RepRecipe, Cloned, Lane); | |
| // If we just cloned a new assumption, add it the assumption cache. | |
| if (auto *II = dyn_cast<AssumeInst>(Cloned)) | |
| State.AC->registerAssumption(II); | |
| assert( | |
| (RepRecipe->getRegion() || | |
| !RepRecipe->getParent()->getPlan()->getVectorLoopRegion() || | |
| all_of(RepRecipe->operands(), | |
| [](VPValue *Op) { return Op->isDefinedOutsideLoopRegions(); })) && | |
| "Expected a recipe is either within a region or all of its operands " | |
| "are defined outside the vectorized region."); | |
| } | |
| void VPReplicateRecipe::execute(VPTransformState &State) { | |
| assert(!State.Lane && "replicate regions must be dissolved before ::execute"); | |
| assert(IsSingleScalar && "VPReplicateRecipes outside replicate regions " | |
| "must have already been unrolled"); | |
| Instruction *UI = getUnderlyingInstr(); | |
| scalarizeInstruction(UI, this, VPLane(0), State); | |
| } | |
| /// Returns a SCEV expression for \p Ptr if it is a pointer computation for | |
| /// which the legacy cost model computes a SCEV expression when computing the | |
| /// address cost. Computing SCEVs for VPValues is incomplete and returns | |
| /// SCEVCouldNotCompute in cases the legacy cost model can compute SCEVs. In | |
| /// those cases we fall back to the legacy cost model. Otherwise return nullptr. | |
| static const SCEV *getAddressAccessSCEV(const VPValue *Ptr, | |
| PredicatedScalarEvolution &PSE, | |
| const Loop *L) { | |
| const SCEV *Addr = vputils::getSCEVExprForVPValue(Ptr, PSE, L); | |
| if (isa<SCEVCouldNotCompute>(Addr)) | |
| return Addr; | |
| return vputils::isAddressSCEVForCost(Addr, *PSE.getSE(), L) ? Addr : nullptr; | |
| } | |
| /// Returns true if \p V is used as part of the address of another load or | |
| /// store. | |
| static bool isUsedByLoadStoreAddress(const VPUser *V) { | |
| SmallPtrSet<const VPUser *, 4> Seen; | |
| SmallVector<const VPUser *> WorkList = {V}; | |
| while (!WorkList.empty()) { | |
| auto *Cur = dyn_cast<VPSingleDefRecipe>(WorkList.pop_back_val()); | |
| if (!Cur || !Seen.insert(Cur).second) | |
| continue; | |
| auto *Blend = dyn_cast<VPBlendRecipe>(Cur); | |
| // Skip blends that use V only through a compare by checking if any incoming | |
| // value was already visited. | |
| if (Blend && none_of(seq<unsigned>(0, Blend->getNumIncomingValues()), | |
| [&](unsigned I) { | |
| return Seen.contains( | |
| Blend->getIncomingValue(I)->getDefiningRecipe()); | |
| })) | |
| continue; | |
| for (VPUser *U : Cur->users()) { | |
| if (auto *InterleaveR = dyn_cast<VPInterleaveBase>(U)) | |
| if (InterleaveR->getAddr() == Cur) | |
| return true; | |
| if (auto *RepR = dyn_cast<VPReplicateRecipe>(U)) { | |
| if (RepR->getOpcode() == Instruction::Load && | |
| RepR->getOperand(0) == Cur) | |
| return true; | |
| if (RepR->getOpcode() == Instruction::Store && | |
| RepR->getOperand(1) == Cur) | |
| return true; | |
| } | |
| if (auto *MemR = dyn_cast<VPWidenMemoryRecipe>(U)) { | |
| if (MemR->getAddr() == Cur && MemR->isConsecutive()) | |
| return true; | |
| } | |
| } | |
| // The legacy cost model only supports scalarization loads/stores with phi | |
| // addresses, if the phi is directly used as load/store address. Don't | |
| // traverse further for Blends. | |
| if (Blend) | |
| continue; | |
| append_range(WorkList, Cur->users()); | |
| } | |
| return false; | |
| } | |
| /// Return true if \p R is a predicated load/store with a loop-invariant address | |
| /// only masked by the header mask. | |
| static bool isPredicatedUniformMemOpAfterTailFolding(const VPReplicateRecipe &R, | |
| const SCEV *PtrSCEV, | |
| VPCostContext &Ctx) { | |
| const VPRegionBlock *ParentRegion = R.getRegion(); | |
| if (!ParentRegion || !ParentRegion->isReplicator() || !PtrSCEV || | |
| !Ctx.PSE.getSE()->isLoopInvariant(PtrSCEV, Ctx.L)) | |
| return false; | |
| auto *BOM = | |
| cast<VPBranchOnMaskRecipe>(&ParentRegion->getEntryBasicBlock()->front()); | |
| return vputils::isHeaderMask(BOM->getOperand(0), *ParentRegion->getPlan()); | |
| } | |
| InstructionCost VPReplicateRecipe::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| Instruction *UI = cast<Instruction>(getUnderlyingValue()); | |
| // VPReplicateRecipe may be cloned as part of an existing VPlan-to-VPlan | |
| // transform, avoid computing their cost multiple times for now. | |
| Ctx.SkipCostComputation.insert(UI); | |
| if (VF.isScalable() && !isSingleScalar()) | |
| return InstructionCost::getInvalid(); | |
| switch (UI->getOpcode()) { | |
| case Instruction::Alloca: | |
| if (VF.isScalable()) | |
| return InstructionCost::getInvalid(); | |
| return Ctx.TTI.getArithmeticInstrCost( | |
| Instruction::Mul, Ctx.Types.inferScalarType(this), Ctx.CostKind); | |
| case Instruction::GetElementPtr: | |
| // We mark this instruction as zero-cost because the cost of GEPs in | |
| // vectorized code depends on whether the corresponding memory instruction | |
| // is scalarized or not. Therefore, we handle GEPs with the memory | |
| // instruction cost. | |
| return 0; | |
| case Instruction::Call: { | |
| auto *CalledFn = | |
| cast<Function>(getOperand(getNumOperands() - 1)->getLiveInIRValue()); | |
| SmallVector<const VPValue *> ArgOps(drop_end(operands())); | |
| SmallVector<Type *, 4> Tys; | |
| for (const VPValue *ArgOp : ArgOps) | |
| Tys.push_back(Ctx.Types.inferScalarType(ArgOp)); | |
| if (CalledFn->isIntrinsic() && | |
| VPCostContext::isFreeScalarIntrinsic(CalledFn->getIntrinsicID())) { | |
| assert(getCostForIntrinsics(CalledFn->getIntrinsicID(), ArgOps, *this, | |
| ElementCount::getFixed(1), Ctx) == 0 && | |
| "scalarizing intrinsic should be free"); | |
| return InstructionCost(0); | |
| } | |
| Type *ResultTy = Ctx.Types.inferScalarType(this); | |
| InstructionCost ScalarCallCost = | |
| Ctx.TTI.getCallInstrCost(CalledFn, ResultTy, Tys, Ctx.CostKind); | |
| if (isSingleScalar()) { | |
| if (CalledFn->isIntrinsic()) | |
| ScalarCallCost = std::min( | |
| ScalarCallCost, | |
| getCostForIntrinsics(CalledFn->getIntrinsicID(), ArgOps, *this, | |
| ElementCount::getFixed(1), Ctx)); | |
| return ScalarCallCost; | |
| } | |
| return ScalarCallCost * VF.getFixedValue() + | |
| Ctx.getScalarizationOverhead(ResultTy, ArgOps, VF); | |
| } | |
| case Instruction::Add: | |
| case Instruction::Sub: | |
| case Instruction::FAdd: | |
| case Instruction::FSub: | |
| case Instruction::Mul: | |
| case Instruction::FMul: | |
| case Instruction::FDiv: | |
| case Instruction::FRem: | |
| case Instruction::Shl: | |
| case Instruction::LShr: | |
| case Instruction::AShr: | |
| case Instruction::And: | |
| case Instruction::Or: | |
| case Instruction::Xor: | |
| case Instruction::ICmp: | |
| case Instruction::FCmp: | |
| return getCostForRecipeWithOpcode(getOpcode(), ElementCount::getFixed(1), | |
| Ctx) * | |
| (isSingleScalar() ? 1 : VF.getFixedValue()); | |
| case Instruction::SDiv: | |
| case Instruction::UDiv: | |
| case Instruction::SRem: | |
| case Instruction::URem: { | |
| InstructionCost ScalarCost = | |
| getCostForRecipeWithOpcode(getOpcode(), ElementCount::getFixed(1), Ctx); | |
| if (isSingleScalar()) | |
| return ScalarCost; | |
| // If any of the operands is from a different replicate region and has its | |
| // cost skipped, it may have been forced to scalar. Fall back to legacy cost | |
| // model to avoid cost mis-match. | |
| if (any_of(operands(), [&Ctx, VF](VPValue *Op) { | |
| auto *PredR = dyn_cast<VPPredInstPHIRecipe>(Op); | |
| if (!PredR) | |
| return false; | |
| return Ctx.skipCostComputation( | |
| dyn_cast_or_null<Instruction>( | |
| PredR->getOperand(0)->getUnderlyingValue()), | |
| VF.isVector()); | |
| })) | |
| break; | |
| ScalarCost = ScalarCost * VF.getFixedValue() + | |
| Ctx.getScalarizationOverhead(Ctx.Types.inferScalarType(this), | |
| to_vector(operands()), VF); | |
| // If the recipe is not predicated (i.e. not in a replicate region), return | |
| // the scalar cost. Otherwise handle predicated cost. | |
| if (!getRegion()->isReplicator()) | |
| return ScalarCost; | |
| // Account for the phi nodes that we will create. | |
| ScalarCost += VF.getFixedValue() * | |
| Ctx.TTI.getCFInstrCost(Instruction::PHI, Ctx.CostKind); | |
| // Scale the cost by the probability of executing the predicated blocks. | |
| // This assumes the predicated block for each vector lane is equally | |
| // likely. | |
| ScalarCost /= Ctx.getPredBlockCostDivisor(UI->getParent()); | |
| return ScalarCost; | |
| } | |
| case Instruction::Load: | |
| case Instruction::Store: { | |
| bool IsLoad = UI->getOpcode() == Instruction::Load; | |
| const VPValue *PtrOp = getOperand(!IsLoad); | |
| const SCEV *PtrSCEV = getAddressAccessSCEV(PtrOp, Ctx.PSE, Ctx.L); | |
| if (isa_and_nonnull<SCEVCouldNotCompute>(PtrSCEV)) | |
| break; | |
| Type *ValTy = Ctx.Types.inferScalarType(IsLoad ? this : getOperand(0)); | |
| Type *ScalarPtrTy = Ctx.Types.inferScalarType(PtrOp); | |
| const Align Alignment = getLoadStoreAlignment(UI); | |
| unsigned AS = cast<PointerType>(ScalarPtrTy)->getAddressSpace(); | |
| TTI::OperandValueInfo OpInfo = TTI::getOperandInfo(UI->getOperand(0)); | |
| bool PreferVectorizedAddressing = Ctx.TTI.prefersVectorizedAddressing(); | |
| bool UsedByLoadStoreAddress = | |
| !PreferVectorizedAddressing && isUsedByLoadStoreAddress(this); | |
| InstructionCost ScalarMemOpCost = Ctx.TTI.getMemoryOpCost( | |
| UI->getOpcode(), ValTy, Alignment, AS, Ctx.CostKind, OpInfo, | |
| UsedByLoadStoreAddress ? UI : nullptr); | |
| // Check if this is a predicated load/store with a loop-invariant address | |
| // only masked by the header mask. If so, return the uniform mem op cost. | |
| if (isPredicatedUniformMemOpAfterTailFolding(*this, PtrSCEV, Ctx)) { | |
| InstructionCost UniformCost = | |
| ScalarMemOpCost + | |
| Ctx.TTI.getAddressComputationCost(ScalarPtrTy, /*SE=*/nullptr, | |
| /*Ptr=*/nullptr, Ctx.CostKind); | |
| auto *VectorTy = cast<VectorType>(toVectorTy(ValTy, VF)); | |
| if (IsLoad) { | |
| return UniformCost + | |
| Ctx.TTI.getShuffleCost(TargetTransformInfo::SK_Broadcast, | |
| VectorTy, VectorTy, {}, Ctx.CostKind); | |
| } | |
| VPValue *StoredVal = getOperand(0); | |
| if (!StoredVal->isDefinedOutsideLoopRegions()) | |
| UniformCost += Ctx.TTI.getIndexedVectorInstrCostFromEnd( | |
| Instruction::ExtractElement, VectorTy, Ctx.CostKind, 0); | |
| return UniformCost; | |
| } | |
| Type *PtrTy = isSingleScalar() ? ScalarPtrTy : toVectorTy(ScalarPtrTy, VF); | |
| InstructionCost ScalarCost = | |
| ScalarMemOpCost + | |
| Ctx.TTI.getAddressComputationCost( | |
| PtrTy, UsedByLoadStoreAddress ? nullptr : Ctx.PSE.getSE(), PtrSCEV, | |
| Ctx.CostKind); | |
| if (isSingleScalar()) | |
| return ScalarCost; | |
| SmallVector<const VPValue *> OpsToScalarize; | |
| Type *ResultTy = Type::getVoidTy(PtrTy->getContext()); | |
| // Set ResultTy and OpsToScalarize, if scalarization is needed. Currently we | |
| // don't assign scalarization overhead in general, if the target prefers | |
| // vectorized addressing or the loaded value is used as part of an address | |
| // of another load or store. | |
| if (!UsedByLoadStoreAddress) { | |
| bool EfficientVectorLoadStore = | |
| Ctx.TTI.supportsEfficientVectorElementLoadStore(); | |
| if (!(IsLoad && !PreferVectorizedAddressing) && | |
| !(!IsLoad && EfficientVectorLoadStore)) | |
| append_range(OpsToScalarize, operands()); | |
| if (!EfficientVectorLoadStore) | |
| ResultTy = Ctx.Types.inferScalarType(this); | |
| } | |
| TTI::VectorInstrContext VIC = | |
| IsLoad ? TTI::VectorInstrContext::Load : TTI::VectorInstrContext::Store; | |
| InstructionCost Cost = | |
| (ScalarCost * VF.getFixedValue()) + | |
| Ctx.getScalarizationOverhead(ResultTy, OpsToScalarize, VF, VIC, true); | |
| const VPRegionBlock *ParentRegion = getRegion(); | |
| if (ParentRegion && ParentRegion->isReplicator()) { | |
| if (!PtrSCEV) | |
| break; | |
| Cost /= Ctx.getPredBlockCostDivisor(UI->getParent()); | |
| Cost += Ctx.TTI.getCFInstrCost(Instruction::CondBr, Ctx.CostKind); | |
| auto *VecI1Ty = VectorType::get( | |
| IntegerType::getInt1Ty(Ctx.L->getHeader()->getContext()), VF); | |
| Cost += Ctx.TTI.getScalarizationOverhead( | |
| VecI1Ty, APInt::getAllOnes(VF.getFixedValue()), | |
| /*Insert=*/false, /*Extract=*/true, Ctx.CostKind); | |
| if (Ctx.useEmulatedMaskMemRefHack(this, VF)) { | |
| // Artificially setting to a high enough value to practically disable | |
| // vectorization with such operations. | |
| return 3000000; | |
| } | |
| } | |
| return Cost; | |
| } | |
| case Instruction::SExt: | |
| case Instruction::ZExt: | |
| case Instruction::FPToUI: | |
| case Instruction::FPToSI: | |
| case Instruction::FPExt: | |
| case Instruction::PtrToInt: | |
| case Instruction::PtrToAddr: | |
| case Instruction::IntToPtr: | |
| case Instruction::SIToFP: | |
| case Instruction::UIToFP: | |
| case Instruction::Trunc: | |
| case Instruction::FPTrunc: | |
| case Instruction::Select: | |
| case Instruction::AddrSpaceCast: { | |
| return getCostForRecipeWithOpcode(getOpcode(), ElementCount::getFixed(1), | |
| Ctx) * | |
| (isSingleScalar() ? 1 : VF.getFixedValue()); | |
| } | |
| case Instruction::ExtractValue: | |
| case Instruction::InsertValue: | |
| return Ctx.TTI.getInsertExtractValueCost(getOpcode(), Ctx.CostKind); | |
| } | |
| return Ctx.getLegacyCost(UI, VF); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPReplicateRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << (IsSingleScalar ? "CLONE " : "REPLICATE "); | |
| if (!getUnderlyingInstr()->getType()->isVoidTy()) { | |
| printAsOperand(O, SlotTracker); | |
| O << " = "; | |
| } | |
| if (auto *CB = dyn_cast<CallBase>(getUnderlyingInstr())) { | |
| O << "call"; | |
| printFlags(O); | |
| O << "@" << CB->getCalledFunction()->getName() << "("; | |
| interleaveComma(make_range(op_begin(), op_begin() + (getNumOperands() - 1)), | |
| O, [&O, &SlotTracker](VPValue *Op) { | |
| Op->printAsOperand(O, SlotTracker); | |
| }); | |
| O << ")"; | |
| } else { | |
| O << Instruction::getOpcodeName(getUnderlyingInstr()->getOpcode()); | |
| printFlags(O); | |
| printOperands(O, SlotTracker); | |
| } | |
| // Find if the recipe is used by a widened recipe via an intervening | |
| // VPPredInstPHIRecipe. In this case, also pack the scalar values in a vector. | |
| if (any_of(users(), [](const VPUser *U) { | |
| if (auto *PredR = dyn_cast<VPPredInstPHIRecipe>(U)) | |
| return !vputils::onlyScalarValuesUsed(PredR); | |
| return false; | |
| })) | |
| O << " (S->V)"; | |
| } | |
| #endif | |
| void VPBranchOnMaskRecipe::execute(VPTransformState &State) { | |
| llvm_unreachable("recipe must be removed when dissolving replicate region"); | |
| } | |
| InstructionCost VPBranchOnMaskRecipe::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| // The legacy cost model doesn't assign costs to branches for individual | |
| // replicate regions. Match the current behavior in the VPlan cost model for | |
| // now. | |
| return 0; | |
| } | |
| void VPPredInstPHIRecipe::execute(VPTransformState &State) { | |
| llvm_unreachable("recipe must be removed when dissolving replicate region"); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPPredInstPHIRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "PHI-PREDICATED-INSTRUCTION "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = "; | |
| printOperands(O, SlotTracker); | |
| } | |
| #endif | |
| InstructionCost VPWidenMemoryRecipe::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| Type *Ty = toVectorTy(getLoadStoreType(&Ingredient), VF); | |
| unsigned AS = cast<PointerType>(Ctx.Types.inferScalarType(getAddr())) | |
| ->getAddressSpace(); | |
| unsigned Opcode = isa<VPWidenLoadRecipe, VPWidenLoadEVLRecipe>(this) | |
| ? Instruction::Load | |
| : Instruction::Store; | |
| if (!Consecutive) { | |
| // TODO: Using the original IR may not be accurate. | |
| // Currently, ARM will use the underlying IR to calculate gather/scatter | |
| // instruction cost. | |
| [[maybe_unused]] auto IsReverseMask = [this]() { | |
| VPValue *Mask = getMask(); | |
| if (!Mask) | |
| return false; | |
| if (isa<VPWidenLoadEVLRecipe, VPWidenStoreEVLRecipe>(this)) | |
| return match(Mask, m_Intrinsic<Intrinsic::experimental_vp_reverse>()); | |
| return match(Mask, m_Reverse(m_VPValue())); | |
| }; | |
| assert(!IsReverseMask() && | |
| "Inconsecutive memory access should not have reverse order"); | |
| const Value *Ptr = getLoadStorePointerOperand(&Ingredient); | |
| Type *PtrTy = Ptr->getType(); | |
| // If the address value is uniform across all lanes, then the address can be | |
| // calculated with scalar type and broadcast. | |
| if (!vputils::isSingleScalar(getAddr())) | |
| PtrTy = toVectorTy(PtrTy, VF); | |
| unsigned IID = isa<VPWidenLoadRecipe>(this) ? Intrinsic::masked_gather | |
| : isa<VPWidenStoreRecipe>(this) ? Intrinsic::masked_scatter | |
| : isa<VPWidenLoadEVLRecipe>(this) ? Intrinsic::vp_gather | |
| : Intrinsic::vp_scatter; | |
| return Ctx.TTI.getAddressComputationCost(PtrTy, nullptr, nullptr, | |
| Ctx.CostKind) + | |
| Ctx.TTI.getMemIntrinsicInstrCost( | |
| MemIntrinsicCostAttributes(IID, Ty, Ptr, IsMasked, Alignment, | |
| &Ingredient), | |
| Ctx.CostKind); | |
| } | |
| InstructionCost Cost = 0; | |
| if (IsMasked) { | |
| unsigned IID = isa<VPWidenLoadRecipe>(this) ? Intrinsic::masked_load | |
| : Intrinsic::masked_store; | |
| Cost += Ctx.TTI.getMemIntrinsicInstrCost( | |
| MemIntrinsicCostAttributes(IID, Ty, Alignment, AS), Ctx.CostKind); | |
| } else { | |
| TTI::OperandValueInfo OpInfo = Ctx.getOperandInfo( | |
| isa<VPWidenLoadRecipe, VPWidenLoadEVLRecipe>(this) ? getOperand(0) | |
| : getOperand(1)); | |
| Cost += Ctx.TTI.getMemoryOpCost(Opcode, Ty, Alignment, AS, Ctx.CostKind, | |
| OpInfo, &Ingredient); | |
| } | |
| return Cost; | |
| } | |
| void VPWidenLoadRecipe::execute(VPTransformState &State) { | |
| Type *ScalarDataTy = getLoadStoreType(&Ingredient); | |
| auto *DataTy = VectorType::get(ScalarDataTy, State.VF); | |
| bool CreateGather = !isConsecutive(); | |
| auto &Builder = State.Builder; | |
| Value *Mask = nullptr; | |
| if (auto *VPMask = getMask()) | |
| Mask = State.get(VPMask); | |
| Value *Addr = State.get(getAddr(), /*IsScalar*/ !CreateGather); | |
| Value *NewLI; | |
| if (CreateGather) { | |
| NewLI = Builder.CreateMaskedGather(DataTy, Addr, Alignment, Mask, nullptr, | |
| "wide.masked.gather"); | |
| } else if (Mask) { | |
| NewLI = | |
| Builder.CreateMaskedLoad(DataTy, Addr, Alignment, Mask, | |
| PoisonValue::get(DataTy), "wide.masked.load"); | |
| } else { | |
| NewLI = Builder.CreateAlignedLoad(DataTy, Addr, Alignment, "wide.load"); | |
| } | |
| applyMetadata(*cast<Instruction>(NewLI)); | |
| State.set(this, NewLI); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPWidenLoadRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "WIDEN "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = load "; | |
| printOperands(O, SlotTracker); | |
| } | |
| #endif | |
| void VPWidenLoadEVLRecipe::execute(VPTransformState &State) { | |
| Type *ScalarDataTy = getLoadStoreType(&Ingredient); | |
| auto *DataTy = VectorType::get(ScalarDataTy, State.VF); | |
| bool CreateGather = !isConsecutive(); | |
| auto &Builder = State.Builder; | |
| CallInst *NewLI; | |
| Value *EVL = State.get(getEVL(), VPLane(0)); | |
| Value *Addr = State.get(getAddr(), !CreateGather); | |
| Value *Mask = nullptr; | |
| if (VPValue *VPMask = getMask()) | |
| Mask = State.get(VPMask); | |
| else | |
| Mask = Builder.CreateVectorSplat(State.VF, Builder.getTrue()); | |
| if (CreateGather) { | |
| NewLI = | |
| Builder.CreateIntrinsic(DataTy, Intrinsic::vp_gather, {Addr, Mask, EVL}, | |
| nullptr, "wide.masked.gather"); | |
| } else { | |
| NewLI = Builder.CreateIntrinsic(DataTy, Intrinsic::vp_load, | |
| {Addr, Mask, EVL}, nullptr, "vp.op.load"); | |
| } | |
| NewLI->addParamAttr( | |
| 0, Attribute::getWithAlignment(NewLI->getContext(), Alignment)); | |
| applyMetadata(*NewLI); | |
| Instruction *Res = NewLI; | |
| State.set(this, Res); | |
| } | |
| InstructionCost VPWidenLoadEVLRecipe::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| if (!Consecutive || IsMasked) | |
| return VPWidenMemoryRecipe::computeCost(VF, Ctx); | |
| // We need to use the getMemIntrinsicInstrCost() instead of getMemoryOpCost() | |
| // here because the EVL recipes using EVL to replace the tail mask. But in the | |
| // legacy model, it will always calculate the cost of mask. | |
| // TODO: Using getMemoryOpCost() instead of getMemIntrinsicInstrCost when we | |
| // don't need to compare to the legacy cost model. | |
| Type *Ty = toVectorTy(getLoadStoreType(&Ingredient), VF); | |
| unsigned AS = cast<PointerType>(Ctx.Types.inferScalarType(getAddr())) | |
| ->getAddressSpace(); | |
| return Ctx.TTI.getMemIntrinsicInstrCost( | |
| MemIntrinsicCostAttributes(Intrinsic::vp_load, Ty, Alignment, AS), | |
| Ctx.CostKind); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPWidenLoadEVLRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "WIDEN "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = vp.load "; | |
| printOperands(O, SlotTracker); | |
| } | |
| #endif | |
| void VPWidenStoreRecipe::execute(VPTransformState &State) { | |
| VPValue *StoredVPValue = getStoredValue(); | |
| bool CreateScatter = !isConsecutive(); | |
| auto &Builder = State.Builder; | |
| Value *Mask = nullptr; | |
| if (auto *VPMask = getMask()) | |
| Mask = State.get(VPMask); | |
| Value *StoredVal = State.get(StoredVPValue); | |
| Value *Addr = State.get(getAddr(), /*IsScalar*/ !CreateScatter); | |
| Instruction *NewSI = nullptr; | |
| if (CreateScatter) | |
| NewSI = Builder.CreateMaskedScatter(StoredVal, Addr, Alignment, Mask); | |
| else if (Mask) | |
| NewSI = Builder.CreateMaskedStore(StoredVal, Addr, Alignment, Mask); | |
| else | |
| NewSI = Builder.CreateAlignedStore(StoredVal, Addr, Alignment); | |
| applyMetadata(*NewSI); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPWidenStoreRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "WIDEN store "; | |
| printOperands(O, SlotTracker); | |
| } | |
| #endif | |
| void VPWidenStoreEVLRecipe::execute(VPTransformState &State) { | |
| VPValue *StoredValue = getStoredValue(); | |
| bool CreateScatter = !isConsecutive(); | |
| auto &Builder = State.Builder; | |
| CallInst *NewSI = nullptr; | |
| Value *StoredVal = State.get(StoredValue); | |
| Value *EVL = State.get(getEVL(), VPLane(0)); | |
| Value *Mask = nullptr; | |
| if (VPValue *VPMask = getMask()) | |
| Mask = State.get(VPMask); | |
| else | |
| Mask = Builder.CreateVectorSplat(State.VF, Builder.getTrue()); | |
| Value *Addr = State.get(getAddr(), !CreateScatter); | |
| if (CreateScatter) { | |
| NewSI = Builder.CreateIntrinsic(Type::getVoidTy(EVL->getContext()), | |
| Intrinsic::vp_scatter, | |
| {StoredVal, Addr, Mask, EVL}); | |
| } else { | |
| NewSI = Builder.CreateIntrinsic(Type::getVoidTy(EVL->getContext()), | |
| Intrinsic::vp_store, | |
| {StoredVal, Addr, Mask, EVL}); | |
| } | |
| NewSI->addParamAttr( | |
| 1, Attribute::getWithAlignment(NewSI->getContext(), Alignment)); | |
| applyMetadata(*NewSI); | |
| } | |
| InstructionCost VPWidenStoreEVLRecipe::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| if (!Consecutive || IsMasked) | |
| return VPWidenMemoryRecipe::computeCost(VF, Ctx); | |
| // We need to use the getMemIntrinsicInstrCost() instead of getMemoryOpCost() | |
| // here because the EVL recipes using EVL to replace the tail mask. But in the | |
| // legacy model, it will always calculate the cost of mask. | |
| // TODO: Using getMemoryOpCost() instead of getMemIntrinsicInstrCost when we | |
| // don't need to compare to the legacy cost model. | |
| Type *Ty = toVectorTy(getLoadStoreType(&Ingredient), VF); | |
| unsigned AS = cast<PointerType>(Ctx.Types.inferScalarType(getAddr())) | |
| ->getAddressSpace(); | |
| return Ctx.TTI.getMemIntrinsicInstrCost( | |
| MemIntrinsicCostAttributes(Intrinsic::vp_store, Ty, Alignment, AS), | |
| Ctx.CostKind); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPWidenStoreEVLRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "WIDEN vp.store "; | |
| printOperands(O, SlotTracker); | |
| } | |
| #endif | |
| static Value *createBitOrPointerCast(IRBuilderBase &Builder, Value *V, | |
| VectorType *DstVTy, const DataLayout &DL) { | |
| // Verify that V is a vector type with same number of elements as DstVTy. | |
| auto VF = DstVTy->getElementCount(); | |
| auto *SrcVecTy = cast<VectorType>(V->getType()); | |
| assert(VF == SrcVecTy->getElementCount() && "Vector dimensions do not match"); | |
| Type *SrcElemTy = SrcVecTy->getElementType(); | |
| Type *DstElemTy = DstVTy->getElementType(); | |
| assert((DL.getTypeSizeInBits(SrcElemTy) == DL.getTypeSizeInBits(DstElemTy)) && | |
| "Vector elements must have same size"); | |
| // Do a direct cast if element types are castable. | |
| if (CastInst::isBitOrNoopPointerCastable(SrcElemTy, DstElemTy, DL)) { | |
| return Builder.CreateBitOrPointerCast(V, DstVTy); | |
| } | |
| // V cannot be directly casted to desired vector type. | |
| // May happen when V is a floating point vector but DstVTy is a vector of | |
| // pointers or vice-versa. Handle this using a two-step bitcast using an | |
| // intermediate Integer type for the bitcast i.e. Ptr <-> Int <-> Float. | |
| assert((DstElemTy->isPointerTy() != SrcElemTy->isPointerTy()) && | |
| "Only one type should be a pointer type"); | |
| assert((DstElemTy->isFloatingPointTy() != SrcElemTy->isFloatingPointTy()) && | |
| "Only one type should be a floating point type"); | |
| Type *IntTy = | |
| IntegerType::getIntNTy(V->getContext(), DL.getTypeSizeInBits(SrcElemTy)); | |
| auto *VecIntTy = VectorType::get(IntTy, VF); | |
| Value *CastVal = Builder.CreateBitOrPointerCast(V, VecIntTy); | |
| return Builder.CreateBitOrPointerCast(CastVal, DstVTy); | |
| } | |
| /// Return a vector containing interleaved elements from multiple | |
| /// smaller input vectors. | |
| static Value *interleaveVectors(IRBuilderBase &Builder, ArrayRef<Value *> Vals, | |
| const Twine &Name) { | |
| unsigned Factor = Vals.size(); | |
| assert(Factor > 1 && "Tried to interleave invalid number of vectors"); | |
| VectorType *VecTy = cast<VectorType>(Vals[0]->getType()); | |
| #ifndef NDEBUG | |
| for (Value *Val : Vals) | |
| assert(Val->getType() == VecTy && "Tried to interleave mismatched types"); | |
| #endif | |
| // Scalable vectors cannot use arbitrary shufflevectors (only splats), so | |
| // must use intrinsics to interleave. | |
| if (VecTy->isScalableTy()) { | |
| assert(Factor <= 8 && "Unsupported interleave factor for scalable vectors"); | |
| return Builder.CreateVectorInterleave(Vals, Name); | |
| } | |
| // Fixed length. Start by concatenating all vectors into a wide vector. | |
| Value *WideVec = concatenateVectors(Builder, Vals); | |
| // Interleave the elements into the wide vector. | |
| const unsigned NumElts = VecTy->getElementCount().getFixedValue(); | |
| return Builder.CreateShuffleVector( | |
| WideVec, createInterleaveMask(NumElts, Factor), Name); | |
| } | |
| // Try to vectorize the interleave group that \p Instr belongs to. | |
| // | |
| // E.g. Translate following interleaved load group (factor = 3): | |
| // for (i = 0; i < N; i+=3) { | |
| // R = Pic[i]; // Member of index 0 | |
| // G = Pic[i+1]; // Member of index 1 | |
| // B = Pic[i+2]; // Member of index 2 | |
| // ... // do something to R, G, B | |
| // } | |
| // To: | |
| // %wide.vec = load <12 x i32> ; Read 4 tuples of R,G,B | |
| // %R.vec = shuffle %wide.vec, poison, <0, 3, 6, 9> ; R elements | |
| // %G.vec = shuffle %wide.vec, poison, <1, 4, 7, 10> ; G elements | |
| // %B.vec = shuffle %wide.vec, poison, <2, 5, 8, 11> ; B elements | |
| // | |
| // Or translate following interleaved store group (factor = 3): | |
| // for (i = 0; i < N; i+=3) { | |
| // ... do something to R, G, B | |
| // Pic[i] = R; // Member of index 0 | |
| // Pic[i+1] = G; // Member of index 1 | |
| // Pic[i+2] = B; // Member of index 2 | |
| // } | |
| // To: | |
| // %R_G.vec = shuffle %R.vec, %G.vec, <0, 1, 2, ..., 7> | |
| // %B_U.vec = shuffle %B.vec, poison, <0, 1, 2, 3, u, u, u, u> | |
| // %interleaved.vec = shuffle %R_G.vec, %B_U.vec, | |
| // <0, 4, 8, 1, 5, 9, 2, 6, 10, 3, 7, 11> ; Interleave R,G,B elements | |
| // store <12 x i32> %interleaved.vec ; Write 4 tuples of R,G,B | |
| void VPInterleaveRecipe::execute(VPTransformState &State) { | |
| assert(!State.Lane && "Interleave group being replicated."); | |
| assert((!needsMaskForGaps() || !State.VF.isScalable()) && | |
| "Masking gaps for scalable vectors is not yet supported."); | |
| const InterleaveGroup<Instruction> *Group = getInterleaveGroup(); | |
| Instruction *Instr = Group->getInsertPos(); | |
| // Prepare for the vector type of the interleaved load/store. | |
| Type *ScalarTy = getLoadStoreType(Instr); | |
| unsigned InterleaveFactor = Group->getFactor(); | |
| auto *VecTy = VectorType::get(ScalarTy, State.VF * InterleaveFactor); | |
| VPValue *BlockInMask = getMask(); | |
| VPValue *Addr = getAddr(); | |
| Value *ResAddr = State.get(Addr, VPLane(0)); | |
| auto CreateGroupMask = [&BlockInMask, &State, | |
| &InterleaveFactor](Value *MaskForGaps) -> Value * { | |
| if (State.VF.isScalable()) { | |
| assert(!MaskForGaps && "Interleaved groups with gaps are not supported."); | |
| assert(InterleaveFactor <= 8 && | |
| "Unsupported deinterleave factor for scalable vectors"); | |
| auto *ResBlockInMask = State.get(BlockInMask); | |
| SmallVector<Value *> Ops(InterleaveFactor, ResBlockInMask); | |
| return interleaveVectors(State.Builder, Ops, "interleaved.mask"); | |
| } | |
| if (!BlockInMask) | |
| return MaskForGaps; | |
| Value *ResBlockInMask = State.get(BlockInMask); | |
| Value *ShuffledMask = State.Builder.CreateShuffleVector( | |
| ResBlockInMask, | |
| createReplicatedMask(InterleaveFactor, State.VF.getFixedValue()), | |
| "interleaved.mask"); | |
| return MaskForGaps ? State.Builder.CreateBinOp(Instruction::And, | |
| ShuffledMask, MaskForGaps) | |
| : ShuffledMask; | |
| }; | |
| const DataLayout &DL = Instr->getDataLayout(); | |
| // Vectorize the interleaved load group. | |
| if (isa<LoadInst>(Instr)) { | |
| Value *MaskForGaps = nullptr; | |
| if (needsMaskForGaps()) { | |
| MaskForGaps = | |
| createBitMaskForGaps(State.Builder, State.VF.getFixedValue(), *Group); | |
| assert(MaskForGaps && "Mask for Gaps is required but it is null"); | |
| } | |
| Instruction *NewLoad; | |
| if (BlockInMask || MaskForGaps) { | |
| Value *GroupMask = CreateGroupMask(MaskForGaps); | |
| Value *PoisonVec = PoisonValue::get(VecTy); | |
| NewLoad = State.Builder.CreateMaskedLoad(VecTy, ResAddr, | |
| Group->getAlign(), GroupMask, | |
| PoisonVec, "wide.masked.vec"); | |
| } else | |
| NewLoad = State.Builder.CreateAlignedLoad(VecTy, ResAddr, | |
| Group->getAlign(), "wide.vec"); | |
| applyMetadata(*NewLoad); | |
| // TODO: Also manage existing metadata using VPIRMetadata. | |
| Group->addMetadata(NewLoad); | |
| ArrayRef<VPRecipeValue *> VPDefs = definedValues(); | |
| if (VecTy->isScalableTy()) { | |
| // Scalable vectors cannot use arbitrary shufflevectors (only splats), | |
| // so must use intrinsics to deinterleave. | |
| assert(InterleaveFactor <= 8 && | |
| "Unsupported deinterleave factor for scalable vectors"); | |
| NewLoad = State.Builder.CreateIntrinsic( | |
| Intrinsic::getDeinterleaveIntrinsicID(InterleaveFactor), | |
| NewLoad->getType(), NewLoad, | |
| /*FMFSource=*/nullptr, "strided.vec"); | |
| } | |
| auto CreateStridedVector = [&InterleaveFactor, &State, | |
| &NewLoad](unsigned Index) -> Value * { | |
| assert(Index < InterleaveFactor && "Illegal group index"); | |
| if (State.VF.isScalable()) | |
| return State.Builder.CreateExtractValue(NewLoad, Index); | |
| // For fixed length VF, use shuffle to extract the sub-vectors from the | |
| // wide load. | |
| auto StrideMask = | |
| createStrideMask(Index, InterleaveFactor, State.VF.getFixedValue()); | |
| return State.Builder.CreateShuffleVector(NewLoad, StrideMask, | |
| "strided.vec"); | |
| }; | |
| for (unsigned I = 0, J = 0; I < InterleaveFactor; ++I) { | |
| Instruction *Member = Group->getMember(I); | |
| // Skip the gaps in the group. | |
| if (!Member) | |
| continue; | |
| Value *StridedVec = CreateStridedVector(I); | |
| // If this member has different type, cast the result type. | |
| if (Member->getType() != ScalarTy) { | |
| VectorType *OtherVTy = VectorType::get(Member->getType(), State.VF); | |
| StridedVec = | |
| createBitOrPointerCast(State.Builder, StridedVec, OtherVTy, DL); | |
| } | |
| if (Group->isReverse()) | |
| StridedVec = State.Builder.CreateVectorReverse(StridedVec, "reverse"); | |
| State.set(VPDefs[J], StridedVec); | |
| ++J; | |
| } | |
| return; | |
| } | |
| // The sub vector type for current instruction. | |
| auto *SubVT = VectorType::get(ScalarTy, State.VF); | |
| // Vectorize the interleaved store group. | |
| Value *MaskForGaps = | |
| createBitMaskForGaps(State.Builder, State.VF.getKnownMinValue(), *Group); | |
| assert(((MaskForGaps != nullptr) == needsMaskForGaps()) && | |
| "Mismatch between NeedsMaskForGaps and MaskForGaps"); | |
| ArrayRef<VPValue *> StoredValues = getStoredValues(); | |
| // Collect the stored vector from each member. | |
| SmallVector<Value *, 4> StoredVecs; | |
| unsigned StoredIdx = 0; | |
| for (unsigned i = 0; i < InterleaveFactor; i++) { | |
| assert((Group->getMember(i) || MaskForGaps) && | |
| "Fail to get a member from an interleaved store group"); | |
| Instruction *Member = Group->getMember(i); | |
| // Skip the gaps in the group. | |
| if (!Member) { | |
| Value *Undef = PoisonValue::get(SubVT); | |
| StoredVecs.push_back(Undef); | |
| continue; | |
| } | |
| Value *StoredVec = State.get(StoredValues[StoredIdx]); | |
| ++StoredIdx; | |
| if (Group->isReverse()) | |
| StoredVec = State.Builder.CreateVectorReverse(StoredVec, "reverse"); | |
| // If this member has different type, cast it to a unified type. | |
| if (StoredVec->getType() != SubVT) | |
| StoredVec = createBitOrPointerCast(State.Builder, StoredVec, SubVT, DL); | |
| StoredVecs.push_back(StoredVec); | |
| } | |
| // Interleave all the smaller vectors into one wider vector. | |
| Value *IVec = interleaveVectors(State.Builder, StoredVecs, "interleaved.vec"); | |
| Instruction *NewStoreInstr; | |
| if (BlockInMask || MaskForGaps) { | |
| Value *GroupMask = CreateGroupMask(MaskForGaps); | |
| NewStoreInstr = State.Builder.CreateMaskedStore( | |
| IVec, ResAddr, Group->getAlign(), GroupMask); | |
| } else | |
| NewStoreInstr = | |
| State.Builder.CreateAlignedStore(IVec, ResAddr, Group->getAlign()); | |
| applyMetadata(*NewStoreInstr); | |
| // TODO: Also manage existing metadata using VPIRMetadata. | |
| Group->addMetadata(NewStoreInstr); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPInterleaveRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| const InterleaveGroup<Instruction> *IG = getInterleaveGroup(); | |
| O << Indent << "INTERLEAVE-GROUP with factor " << IG->getFactor() << " at "; | |
| IG->getInsertPos()->printAsOperand(O, false); | |
| O << ", "; | |
| getAddr()->printAsOperand(O, SlotTracker); | |
| VPValue *Mask = getMask(); | |
| if (Mask) { | |
| O << ", "; | |
| Mask->printAsOperand(O, SlotTracker); | |
| } | |
| unsigned OpIdx = 0; | |
| for (unsigned i = 0; i < IG->getFactor(); ++i) { | |
| if (!IG->getMember(i)) | |
| continue; | |
| if (getNumStoreOperands() > 0) { | |
| O << "\n" << Indent << " store "; | |
| getOperand(1 + OpIdx)->printAsOperand(O, SlotTracker); | |
| O << " to index " << i; | |
| } else { | |
| O << "\n" << Indent << " "; | |
| getVPValue(OpIdx)->printAsOperand(O, SlotTracker); | |
| O << " = load from index " << i; | |
| } | |
| ++OpIdx; | |
| } | |
| } | |
| #endif | |
| void VPInterleaveEVLRecipe::execute(VPTransformState &State) { | |
| assert(!State.Lane && "Interleave group being replicated."); | |
| assert(State.VF.isScalable() && | |
| "Only support scalable VF for EVL tail-folding."); | |
| assert(!needsMaskForGaps() && | |
| "Masking gaps for scalable vectors is not yet supported."); | |
| const InterleaveGroup<Instruction> *Group = getInterleaveGroup(); | |
| Instruction *Instr = Group->getInsertPos(); | |
| // Prepare for the vector type of the interleaved load/store. | |
| Type *ScalarTy = getLoadStoreType(Instr); | |
| unsigned InterleaveFactor = Group->getFactor(); | |
| assert(InterleaveFactor <= 8 && | |
| "Unsupported deinterleave/interleave factor for scalable vectors"); | |
| ElementCount WideVF = State.VF * InterleaveFactor; | |
| auto *VecTy = VectorType::get(ScalarTy, WideVF); | |
| VPValue *Addr = getAddr(); | |
| Value *ResAddr = State.get(Addr, VPLane(0)); | |
| Value *EVL = State.get(getEVL(), VPLane(0)); | |
| Value *InterleaveEVL = State.Builder.CreateMul( | |
| EVL, ConstantInt::get(EVL->getType(), InterleaveFactor), "interleave.evl", | |
| /* NUW= */ true, /* NSW= */ true); | |
| LLVMContext &Ctx = State.Builder.getContext(); | |
| Value *GroupMask = nullptr; | |
| if (VPValue *BlockInMask = getMask()) { | |
| SmallVector<Value *> Ops(InterleaveFactor, State.get(BlockInMask)); | |
| GroupMask = interleaveVectors(State.Builder, Ops, "interleaved.mask"); | |
| } else { | |
| GroupMask = | |
| State.Builder.CreateVectorSplat(WideVF, State.Builder.getTrue()); | |
| } | |
| // Vectorize the interleaved load group. | |
| if (isa<LoadInst>(Instr)) { | |
| CallInst *NewLoad = State.Builder.CreateIntrinsic( | |
| VecTy, Intrinsic::vp_load, {ResAddr, GroupMask, InterleaveEVL}, nullptr, | |
| "wide.vp.load"); | |
| NewLoad->addParamAttr(0, | |
| Attribute::getWithAlignment(Ctx, Group->getAlign())); | |
| applyMetadata(*NewLoad); | |
| // TODO: Also manage existing metadata using VPIRMetadata. | |
| Group->addMetadata(NewLoad); | |
| // Scalable vectors cannot use arbitrary shufflevectors (only splats), | |
| // so must use intrinsics to deinterleave. | |
| NewLoad = State.Builder.CreateIntrinsic( | |
| Intrinsic::getDeinterleaveIntrinsicID(InterleaveFactor), | |
| NewLoad->getType(), NewLoad, | |
| /*FMFSource=*/nullptr, "strided.vec"); | |
| const DataLayout &DL = Instr->getDataLayout(); | |
| for (unsigned I = 0, J = 0; I < InterleaveFactor; ++I) { | |
| Instruction *Member = Group->getMember(I); | |
| // Skip the gaps in the group. | |
| if (!Member) | |
| continue; | |
| Value *StridedVec = State.Builder.CreateExtractValue(NewLoad, I); | |
| // If this member has different type, cast the result type. | |
| if (Member->getType() != ScalarTy) { | |
| VectorType *OtherVTy = VectorType::get(Member->getType(), State.VF); | |
| StridedVec = | |
| createBitOrPointerCast(State.Builder, StridedVec, OtherVTy, DL); | |
| } | |
| State.set(getVPValue(J), StridedVec); | |
| ++J; | |
| } | |
| return; | |
| } // End for interleaved load. | |
| // The sub vector type for current instruction. | |
| auto *SubVT = VectorType::get(ScalarTy, State.VF); | |
| // Vectorize the interleaved store group. | |
| ArrayRef<VPValue *> StoredValues = getStoredValues(); | |
| // Collect the stored vector from each member. | |
| SmallVector<Value *, 4> StoredVecs; | |
| const DataLayout &DL = Instr->getDataLayout(); | |
| for (unsigned I = 0, StoredIdx = 0; I < InterleaveFactor; I++) { | |
| Instruction *Member = Group->getMember(I); | |
| // Skip the gaps in the group. | |
| if (!Member) { | |
| StoredVecs.push_back(PoisonValue::get(SubVT)); | |
| continue; | |
| } | |
| Value *StoredVec = State.get(StoredValues[StoredIdx]); | |
| // If this member has different type, cast it to a unified type. | |
| if (StoredVec->getType() != SubVT) | |
| StoredVec = createBitOrPointerCast(State.Builder, StoredVec, SubVT, DL); | |
| StoredVecs.push_back(StoredVec); | |
| ++StoredIdx; | |
| } | |
| // Interleave all the smaller vectors into one wider vector. | |
| Value *IVec = interleaveVectors(State.Builder, StoredVecs, "interleaved.vec"); | |
| CallInst *NewStore = | |
| State.Builder.CreateIntrinsic(Type::getVoidTy(Ctx), Intrinsic::vp_store, | |
| {IVec, ResAddr, GroupMask, InterleaveEVL}); | |
| NewStore->addParamAttr(1, | |
| Attribute::getWithAlignment(Ctx, Group->getAlign())); | |
| applyMetadata(*NewStore); | |
| // TODO: Also manage existing metadata using VPIRMetadata. | |
| Group->addMetadata(NewStore); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPInterleaveEVLRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| const InterleaveGroup<Instruction> *IG = getInterleaveGroup(); | |
| O << Indent << "INTERLEAVE-GROUP with factor " << IG->getFactor() << " at "; | |
| IG->getInsertPos()->printAsOperand(O, false); | |
| O << ", "; | |
| getAddr()->printAsOperand(O, SlotTracker); | |
| O << ", "; | |
| getEVL()->printAsOperand(O, SlotTracker); | |
| if (VPValue *Mask = getMask()) { | |
| O << ", "; | |
| Mask->printAsOperand(O, SlotTracker); | |
| } | |
| unsigned OpIdx = 0; | |
| for (unsigned i = 0; i < IG->getFactor(); ++i) { | |
| if (!IG->getMember(i)) | |
| continue; | |
| if (getNumStoreOperands() > 0) { | |
| O << "\n" << Indent << " vp.store "; | |
| getOperand(2 + OpIdx)->printAsOperand(O, SlotTracker); | |
| O << " to index " << i; | |
| } else { | |
| O << "\n" << Indent << " "; | |
| getVPValue(OpIdx)->printAsOperand(O, SlotTracker); | |
| O << " = vp.load from index " << i; | |
| } | |
| ++OpIdx; | |
| } | |
| } | |
| #endif | |
| InstructionCost VPInterleaveBase::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| Instruction *InsertPos = getInsertPos(); | |
| // Find the VPValue index of the interleave group. We need to skip gaps. | |
| unsigned InsertPosIdx = 0; | |
| for (unsigned Idx = 0; IG->getFactor(); ++Idx) | |
| if (auto *Member = IG->getMember(Idx)) { | |
| if (Member == InsertPos) | |
| break; | |
| InsertPosIdx++; | |
| } | |
| Type *ValTy = Ctx.Types.inferScalarType( | |
| getNumDefinedValues() > 0 ? getVPValue(InsertPosIdx) | |
| : getStoredValues()[InsertPosIdx]); | |
| auto *VectorTy = cast<VectorType>(toVectorTy(ValTy, VF)); | |
| unsigned AS = cast<PointerType>(Ctx.Types.inferScalarType(getAddr())) | |
| ->getAddressSpace(); | |
| unsigned InterleaveFactor = IG->getFactor(); | |
| auto *WideVecTy = VectorType::get(ValTy, VF * InterleaveFactor); | |
| // Holds the indices of existing members in the interleaved group. | |
| SmallVector<unsigned, 4> Indices; | |
| for (unsigned IF = 0; IF < InterleaveFactor; IF++) | |
| if (IG->getMember(IF)) | |
| Indices.push_back(IF); | |
| // Calculate the cost of the whole interleaved group. | |
| InstructionCost Cost = Ctx.TTI.getInterleavedMemoryOpCost( | |
| InsertPos->getOpcode(), WideVecTy, IG->getFactor(), Indices, | |
| IG->getAlign(), AS, Ctx.CostKind, getMask(), NeedsMaskForGaps); | |
| if (!IG->isReverse()) | |
| return Cost; | |
| return Cost + IG->getNumMembers() * | |
| Ctx.TTI.getShuffleCost(TargetTransformInfo::SK_Reverse, | |
| VectorTy, VectorTy, {}, Ctx.CostKind, | |
| 0); | |
| } | |
| bool VPWidenPointerInductionRecipe::onlyScalarsGenerated(bool IsScalable) { | |
| return vputils::onlyScalarValuesUsed(this) && | |
| (!IsScalable || vputils::onlyFirstLaneUsed(this)); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPWidenPointerInductionRecipe::printRecipe( | |
| raw_ostream &O, const Twine &Indent, VPSlotTracker &SlotTracker) const { | |
| assert((getNumOperands() == 3 || getNumOperands() == 5) && | |
| "unexpected number of operands"); | |
| O << Indent << "EMIT "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = WIDEN-POINTER-INDUCTION "; | |
| getStartValue()->printAsOperand(O, SlotTracker); | |
| O << ", "; | |
| getStepValue()->printAsOperand(O, SlotTracker); | |
| O << ", "; | |
| getOperand(2)->printAsOperand(O, SlotTracker); | |
| if (getNumOperands() == 5) { | |
| O << ", "; | |
| getOperand(3)->printAsOperand(O, SlotTracker); | |
| O << ", "; | |
| getOperand(4)->printAsOperand(O, SlotTracker); | |
| } | |
| } | |
| void VPExpandSCEVRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "EMIT "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = EXPAND SCEV " << *Expr; | |
| } | |
| #endif | |
| void VPWidenCanonicalIVRecipe::execute(VPTransformState &State) { | |
| Value *CanonicalIV = State.get(getOperand(0), /*IsScalar*/ true); | |
| Type *STy = CanonicalIV->getType(); | |
| IRBuilder<> Builder(State.CFG.PrevBB->getTerminator()); | |
| ElementCount VF = State.VF; | |
| Value *VStart = VF.isScalar() | |
| ? CanonicalIV | |
| : Builder.CreateVectorSplat(VF, CanonicalIV, "broadcast"); | |
| Value *VStep = Builder.CreateElementCount( | |
| STy, VF.multiplyCoefficientBy(getUnrollPart(*this))); | |
| if (VF.isVector()) { | |
| VStep = Builder.CreateVectorSplat(VF, VStep); | |
| VStep = | |
| Builder.CreateAdd(VStep, Builder.CreateStepVector(VStep->getType())); | |
| } | |
| Value *CanonicalVectorIV = Builder.CreateAdd(VStart, VStep, "vec.iv"); | |
| State.set(this, CanonicalVectorIV); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPWidenCanonicalIVRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "EMIT "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = WIDEN-CANONICAL-INDUCTION "; | |
| printOperands(O, SlotTracker); | |
| } | |
| #endif | |
| void VPFirstOrderRecurrencePHIRecipe::execute(VPTransformState &State) { | |
| auto &Builder = State.Builder; | |
| // Create a vector from the initial value. | |
| auto *VectorInit = getStartValue()->getLiveInIRValue(); | |
| Type *VecTy = State.VF.isScalar() | |
| ? VectorInit->getType() | |
| : VectorType::get(VectorInit->getType(), State.VF); | |
| BasicBlock *VectorPH = | |
| State.CFG.VPBB2IRBB.at(getParent()->getCFGPredecessor(0)); | |
| if (State.VF.isVector()) { | |
| auto *IdxTy = Builder.getInt32Ty(); | |
| auto *One = ConstantInt::get(IdxTy, 1); | |
| IRBuilder<>::InsertPointGuard Guard(Builder); | |
| Builder.SetInsertPoint(VectorPH->getTerminator()); | |
| auto *RuntimeVF = getRuntimeVF(Builder, IdxTy, State.VF); | |
| auto *LastIdx = Builder.CreateSub(RuntimeVF, One); | |
| VectorInit = Builder.CreateInsertElement( | |
| PoisonValue::get(VecTy), VectorInit, LastIdx, "vector.recur.init"); | |
| } | |
| // Create a phi node for the new recurrence. | |
| PHINode *Phi = PHINode::Create(VecTy, 2, "vector.recur"); | |
| Phi->insertBefore(State.CFG.PrevBB->getFirstInsertionPt()); | |
| Phi->addIncoming(VectorInit, VectorPH); | |
| State.set(this, Phi); | |
| } | |
| InstructionCost | |
| VPFirstOrderRecurrencePHIRecipe::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| if (VF.isScalar()) | |
| return Ctx.TTI.getCFInstrCost(Instruction::PHI, Ctx.CostKind); | |
| return 0; | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPFirstOrderRecurrencePHIRecipe::printRecipe( | |
| raw_ostream &O, const Twine &Indent, VPSlotTracker &SlotTracker) const { | |
| O << Indent << "FIRST-ORDER-RECURRENCE-PHI "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = phi "; | |
| printOperands(O, SlotTracker); | |
| } | |
| #endif | |
| void VPReductionPHIRecipe::execute(VPTransformState &State) { | |
| // Reductions do not have to start at zero. They can start with | |
| // any loop invariant values. | |
| VPValue *StartVPV = getStartValue(); | |
| // In order to support recurrences we need to be able to vectorize Phi nodes. | |
| // Phi nodes have cycles, so we need to vectorize them in two stages. This is | |
| // stage #1: We create a new vector PHI node with no incoming edges. We'll use | |
| // this value when we vectorize all of the instructions that use the PHI. | |
| BasicBlock *VectorPH = | |
| State.CFG.VPBB2IRBB.at(getParent()->getCFGPredecessor(0)); | |
| bool ScalarPHI = State.VF.isScalar() || isInLoop(); | |
| Value *StartV = State.get(StartVPV, ScalarPHI); | |
| Type *VecTy = StartV->getType(); | |
| BasicBlock *HeaderBB = State.CFG.PrevBB; | |
| assert(State.CurrentParentLoop->getHeader() == HeaderBB && | |
| "recipe must be in the vector loop header"); | |
| auto *Phi = PHINode::Create(VecTy, 2, "vec.phi"); | |
| Phi->insertBefore(HeaderBB->getFirstInsertionPt()); | |
| State.set(this, Phi, isInLoop()); | |
| Phi->addIncoming(StartV, VectorPH); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPReductionPHIRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "WIDEN-REDUCTION-PHI "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = phi"; | |
| printFlags(O); | |
| printOperands(O, SlotTracker); | |
| if (getVFScaleFactor() > 1) | |
| O << " (VF scaled by 1/" << getVFScaleFactor() << ")"; | |
| } | |
| #endif | |
| bool VPBlendRecipe::usesFirstLaneOnly(const VPValue *Op) const { | |
| assert(is_contained(operands(), Op) && "Op must be an operand of the recipe"); | |
| return vputils::onlyFirstLaneUsed(this); | |
| } | |
| void VPWidenPHIRecipe::execute(VPTransformState &State) { | |
| Value *Op0 = State.get(getOperand(0)); | |
| Type *VecTy = Op0->getType(); | |
| Instruction *VecPhi = State.Builder.CreatePHI(VecTy, 2, Name); | |
| State.set(this, VecPhi); | |
| } | |
| InstructionCost VPWidenPHIRecipe::computeCost(ElementCount VF, | |
| VPCostContext &Ctx) const { | |
| return Ctx.TTI.getCFInstrCost(Instruction::PHI, Ctx.CostKind); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPWidenPHIRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "WIDEN-PHI "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = phi "; | |
| printPhiOperands(O, SlotTracker); | |
| } | |
| #endif | |
| void VPActiveLaneMaskPHIRecipe::execute(VPTransformState &State) { | |
| BasicBlock *VectorPH = | |
| State.CFG.VPBB2IRBB.at(getParent()->getCFGPredecessor(0)); | |
| Value *StartMask = State.get(getOperand(0)); | |
| PHINode *Phi = | |
| State.Builder.CreatePHI(StartMask->getType(), 2, "active.lane.mask"); | |
| Phi->addIncoming(StartMask, VectorPH); | |
| State.set(this, Phi); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPActiveLaneMaskPHIRecipe::printRecipe(raw_ostream &O, const Twine &Indent, | |
| VPSlotTracker &SlotTracker) const { | |
| O << Indent << "ACTIVE-LANE-MASK-PHI "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = phi "; | |
| printOperands(O, SlotTracker); | |
| } | |
| #endif | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| void VPCurrentIterationPHIRecipe::printRecipe( | |
| raw_ostream &O, const Twine &Indent, VPSlotTracker &SlotTracker) const { | |
| O << Indent << "CURRENT-ITERATION-PHI "; | |
| printAsOperand(O, SlotTracker); | |
| O << " = phi "; | |
| printOperands(O, SlotTracker); | |
| } | |
| #endif |