| //===- PromoteMemoryToRegister.cpp - Convert allocas to registers ---------===// | |
| // | |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. | |
| // See https://llvm.org/LICENSE.txt for license information. | |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| // This file promotes memory references to be register references. It promotes | |
| // alloca instructions which only have loads and stores as uses. An alloca is | |
| // transformed by using iterated dominator frontiers to place PHI nodes, then | |
| // traversing the function in depth-first order to rewrite loads and stores as | |
| // appropriate. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #include "llvm/ADT/ArrayRef.h" | |
| #include "llvm/ADT/BitVector.h" | |
| #include "llvm/ADT/DenseMap.h" | |
| #include "llvm/ADT/STLExtras.h" | |
| #include "llvm/ADT/SmallPtrSet.h" | |
| #include "llvm/ADT/SmallVector.h" | |
| #include "llvm/ADT/Statistic.h" | |
| #include "llvm/ADT/Twine.h" | |
| #include "llvm/Analysis/AssumptionCache.h" | |
| #include "llvm/Analysis/InstructionSimplify.h" | |
| #include "llvm/Analysis/IteratedDominanceFrontier.h" | |
| #include "llvm/Analysis/ValueTracking.h" | |
| #include "llvm/IR/BasicBlock.h" | |
| #include "llvm/IR/CFG.h" | |
| #include "llvm/IR/Constant.h" | |
| #include "llvm/IR/Constants.h" | |
| #include "llvm/IR/DIBuilder.h" | |
| #include "llvm/IR/DebugInfo.h" | |
| #include "llvm/IR/DebugProgramInstruction.h" | |
| #include "llvm/IR/Dominators.h" | |
| #include "llvm/IR/Function.h" | |
| #include "llvm/IR/InstrTypes.h" | |
| #include "llvm/IR/Instruction.h" | |
| #include "llvm/IR/Instructions.h" | |
| #include "llvm/IR/IntrinsicInst.h" | |
| #include "llvm/IR/Intrinsics.h" | |
| #include "llvm/IR/LLVMContext.h" | |
| #include "llvm/IR/Module.h" | |
| #include "llvm/IR/Operator.h" | |
| #include "llvm/IR/Type.h" | |
| #include "llvm/IR/User.h" | |
| #include "llvm/Support/Casting.h" | |
| #include "llvm/Transforms/Utils/Local.h" | |
| #include "llvm/Transforms/Utils/PromoteMemToReg.h" | |
| #include <algorithm> | |
| #include <cassert> | |
| #include <iterator> | |
| #include <utility> | |
| #include <vector> | |
| using namespace llvm; | |
| #define DEBUG_TYPE "mem2reg" | |
| STATISTIC(NumLocalPromoted, "Number of alloca's promoted within one block"); | |
| STATISTIC(NumSingleStore, "Number of alloca's promoted with a single store"); | |
| STATISTIC(NumDeadAlloca, "Number of dead alloca's removed"); | |
| STATISTIC(NumPHIInsert, "Number of PHI nodes inserted"); | |
| bool llvm::isAllocaPromotable(const AllocaInst *AI) { | |
| // Only allow direct and non-volatile loads and stores... | |
| // All loads and stores must use the same type (determined by the first one | |
| // seen). We don't require the type to match the alloca's declared type. | |
| Type *ExpectedType = nullptr; | |
| for (const User *U : AI->users()) { | |
| if (const LoadInst *LI = dyn_cast<LoadInst>(U)) { | |
| // Note that atomic loads can be transformed; atomic semantics do | |
| // not have any meaning for a local alloca. | |
| if (LI->isVolatile()) | |
| return false; | |
| if (!ExpectedType) | |
| ExpectedType = LI->getType(); | |
| else if (LI->getType() != ExpectedType) | |
| return false; | |
| } else if (const StoreInst *SI = dyn_cast<StoreInst>(U)) { | |
| if (SI->getValueOperand() == AI) | |
| return false; // Don't allow a store OF the AI, only INTO the AI. | |
| // Note that atomic stores can be transformed; atomic semantics do | |
| // not have any meaning for a local alloca. | |
| if (SI->isVolatile()) | |
| return false; | |
| Type *StoreType = SI->getValueOperand()->getType(); | |
| if (!ExpectedType) | |
| ExpectedType = StoreType; | |
| else if (StoreType != ExpectedType) | |
| return false; | |
| } else if (const IntrinsicInst *II = dyn_cast<IntrinsicInst>(U)) { | |
| if (!II->isLifetimeStartOrEnd() && !II->isDroppable() && | |
| II->getIntrinsicID() != Intrinsic::fake_use) | |
| return false; | |
| } else if (const BitCastInst *BCI = dyn_cast<BitCastInst>(U)) { | |
| if (!onlyUsedByLifetimeMarkersOrDroppableInsts(BCI)) | |
| return false; | |
| } else if (const GetElementPtrInst *GEPI = dyn_cast<GetElementPtrInst>(U)) { | |
| if (!GEPI->hasAllZeroIndices()) | |
| return false; | |
| if (!onlyUsedByLifetimeMarkersOrDroppableInsts(GEPI)) | |
| return false; | |
| } else if (const AddrSpaceCastInst *ASCI = dyn_cast<AddrSpaceCastInst>(U)) { | |
| if (!onlyUsedByLifetimeMarkers(ASCI)) | |
| return false; | |
| } else { | |
| return false; | |
| } | |
| } | |
| return true; | |
| } | |
| namespace { | |
| static void createDebugValue(DIBuilder &DIB, Value *NewValue, | |
| DILocalVariable *Variable, | |
| DIExpression *Expression, const DILocation *DI, | |
| DbgVariableRecord *InsertBefore) { | |
| // FIXME: Merge these two functions now that DIBuilder supports | |
| // DbgVariableRecords. We neeed the API to accept DbgVariableRecords as an | |
| // insert point for that to work. | |
| (void)DIB; | |
| DbgVariableRecord::createDbgVariableRecord(NewValue, Variable, Expression, DI, | |
| *InsertBefore); | |
| } | |
| /// Helper for updating assignment tracking debug info when promoting allocas. | |
| class AssignmentTrackingInfo { | |
| /// DbgAssignIntrinsics linked to the alloca with at most one per variable | |
| /// fragment. (i.e. not be a comprehensive set if there are multiple | |
| /// dbg.assigns for one variable fragment). | |
| SmallVector<DbgVariableRecord *> DVRAssigns; | |
| public: | |
| void init(AllocaInst *AI) { | |
| SmallSet<DebugVariable, 2> Vars; | |
| for (DbgVariableRecord *DVR : at::getDVRAssignmentMarkers(AI)) { | |
| if (Vars.insert(DebugVariable(DVR)).second) | |
| DVRAssigns.push_back(DVR); | |
| } | |
| } | |
| /// Update assignment tracking debug info given for the to-be-deleted store | |
| /// \p ToDelete that stores to this alloca. | |
| void updateForDeletedStore( | |
| StoreInst *ToDelete, DIBuilder &DIB, | |
| SmallPtrSet<DbgVariableRecord *, 8> *DVRAssignsToDelete) const { | |
| // There's nothing to do if the alloca doesn't have any variables using | |
| // assignment tracking. | |
| if (DVRAssigns.empty()) | |
| return; | |
| // Insert a dbg.value where the linked dbg.assign is and remember to delete | |
| // the dbg.assign later. Demoting to dbg.value isn't necessary for | |
| // correctness but does reduce compile time and memory usage by reducing | |
| // unnecessary function-local metadata. Remember that we've seen a | |
| // dbg.assign for each variable fragment for the untracked store handling | |
| // (after this loop). | |
| SmallSet<DebugVariableAggregate, 2> VarHasDbgAssignForStore; | |
| auto InsertValueForAssign = [&](auto *DbgAssign, auto *&AssignList) { | |
| VarHasDbgAssignForStore.insert(DebugVariableAggregate(DbgAssign)); | |
| AssignList->insert(DbgAssign); | |
| createDebugValue(DIB, DbgAssign->getValue(), DbgAssign->getVariable(), | |
| DbgAssign->getExpression(), DbgAssign->getDebugLoc(), | |
| DbgAssign); | |
| }; | |
| for (auto *Assign : at::getDVRAssignmentMarkers(ToDelete)) | |
| InsertValueForAssign(Assign, DVRAssignsToDelete); | |
| // It's possible for variables using assignment tracking to have no | |
| // dbg.assign linked to this store. These are variables in DVRAssigns that | |
| // are missing from VarHasDbgAssignForStore. Since there isn't a dbg.assign | |
| // to mark the assignment - and the store is going to be deleted - insert a | |
| // dbg.value to do that now. An untracked store may be either one that | |
| // cannot be represented using assignment tracking (non-const offset or | |
| // size) or one that is trackable but has had its DIAssignID attachment | |
| // dropped accidentally. | |
| auto ConvertUnlinkedAssignToValue = [&](DbgVariableRecord *Assign) { | |
| if (VarHasDbgAssignForStore.contains(DebugVariableAggregate(Assign))) | |
| return; | |
| ConvertDebugDeclareToDebugValue(Assign, ToDelete, DIB); | |
| }; | |
| for_each(DVRAssigns, ConvertUnlinkedAssignToValue); | |
| } | |
| /// Update assignment tracking debug info given for the newly inserted PHI \p | |
| /// NewPhi. | |
| void updateForNewPhi(PHINode *NewPhi, DIBuilder &DIB) const { | |
| // Regardless of the position of dbg.assigns relative to stores, the | |
| // incoming values into a new PHI should be the same for the (imaginary) | |
| // debug-phi. | |
| for (auto *DVR : DVRAssigns) | |
| ConvertDebugDeclareToDebugValue(DVR, NewPhi, DIB); | |
| } | |
| void clear() { DVRAssigns.clear(); } | |
| bool empty() { return DVRAssigns.empty(); } | |
| }; | |
| struct AllocaInfo { | |
| using DPUserVec = SmallVector<DbgVariableRecord *, 1>; | |
| SmallVector<BasicBlock *, 32> DefiningBlocks; | |
| SmallVector<BasicBlock *, 32> UsingBlocks; | |
| StoreInst *OnlyStore; | |
| BasicBlock *OnlyBlock; | |
| bool OnlyUsedInOneBlock; | |
| /// The type used by all loads/stores of this alloca. This may differ from | |
| /// the alloca's declared type if all accesses use a different type. | |
| Type *ValueType; | |
| /// Debug users of the alloca - does not include dbg.assign intrinsics. | |
| DPUserVec DPUsers; | |
| /// Helper to update assignment tracking debug info. | |
| AssignmentTrackingInfo AssignmentTracking; | |
| void clear() { | |
| DefiningBlocks.clear(); | |
| UsingBlocks.clear(); | |
| OnlyStore = nullptr; | |
| OnlyBlock = nullptr; | |
| OnlyUsedInOneBlock = true; | |
| ValueType = nullptr; | |
| DPUsers.clear(); | |
| AssignmentTracking.clear(); | |
| } | |
| /// Scan the uses of the specified alloca, filling in the AllocaInfo used | |
| /// by the rest of the pass to reason about the uses of this alloca. | |
| void AnalyzeAlloca(AllocaInst *AI) { | |
| clear(); | |
| // As we scan the uses of the alloca instruction, keep track of stores, | |
| // and decide whether all of the loads and stores to the alloca are within | |
| // the same basic block. | |
| for (User *U : AI->users()) { | |
| Instruction *User = cast<Instruction>(U); | |
| if (StoreInst *SI = dyn_cast<StoreInst>(User)) { | |
| // Remember the basic blocks which define new values for the alloca | |
| DefiningBlocks.push_back(SI->getParent()); | |
| OnlyStore = SI; | |
| if (!ValueType) | |
| ValueType = SI->getValueOperand()->getType(); | |
| else | |
| assert(ValueType == SI->getValueOperand()->getType() && | |
| "All stores were checked to have used the same type"); | |
| } else { | |
| LoadInst *LI = cast<LoadInst>(User); | |
| // Otherwise it must be a load instruction, keep track of variable | |
| // reads. | |
| UsingBlocks.push_back(LI->getParent()); | |
| if (!ValueType) | |
| ValueType = LI->getType(); | |
| else | |
| assert(ValueType == LI->getType() && | |
| "All loads where checked to have used the same type"); | |
| } | |
| if (OnlyUsedInOneBlock) { | |
| if (!OnlyBlock) | |
| OnlyBlock = User->getParent(); | |
| else if (OnlyBlock != User->getParent()) | |
| OnlyUsedInOneBlock = false; | |
| } | |
| } | |
| SmallVector<DbgVariableRecord *> AllDPUsers; | |
| findDbgUsers(AI, AllDPUsers); | |
| std::copy_if(AllDPUsers.begin(), AllDPUsers.end(), | |
| std::back_inserter(DPUsers), | |
| [](DbgVariableRecord *DVR) { return !DVR->isDbgAssign(); }); | |
| AssignmentTracking.init(AI); | |
| } | |
| }; | |
| template <typename T> class VectorWithUndo { | |
| SmallVector<T, 8> Vals; | |
| SmallVector<std::pair<size_t, T>, 8> Undo; | |
| public: | |
| void undo(size_t S) { | |
| assert(S <= Undo.size()); | |
| while (S < Undo.size()) { | |
| Vals[Undo.back().first] = Undo.back().second; | |
| Undo.pop_back(); | |
| } | |
| } | |
| void resize(size_t Sz) { Vals.resize(Sz); } | |
| size_t undoSize() const { return Undo.size(); } | |
| const T &operator[](size_t Idx) const { return Vals[Idx]; } | |
| void set(size_t Idx, const T &Val) { | |
| if (Vals[Idx] == Val) | |
| return; | |
| Undo.emplace_back(Idx, Vals[Idx]); | |
| Vals[Idx] = Val; | |
| } | |
| void init(size_t Idx, const T &Val) { | |
| assert(Undo.empty()); | |
| Vals[Idx] = Val; | |
| } | |
| }; | |
| /// Data package used by RenamePass(). | |
| struct RenamePassData { | |
| RenamePassData(BasicBlock *B, BasicBlock *P, size_t V, size_t L) | |
| : BB(B), Pred(P), UndoVals(V), UndoLocs(L) {} | |
| BasicBlock *BB; | |
| BasicBlock *Pred; | |
| size_t UndoVals; | |
| size_t UndoLocs; | |
| }; | |
| /// This assigns and keeps a per-bb relative ordering of load/store | |
| /// instructions in the block that directly load or store an alloca. | |
| /// | |
| /// This functionality is important because it avoids scanning large basic | |
| /// blocks multiple times when promoting many allocas in the same block. | |
| class LargeBlockInfo { | |
| /// For each instruction that we track, keep the index of the | |
| /// instruction. | |
| /// | |
| /// The index starts out as the number of the instruction from the start of | |
| /// the block. | |
| DenseMap<const Instruction *, unsigned> InstNumbers; | |
| public: | |
| /// This code only looks at accesses to allocas. | |
| static bool isInterestingInstruction(const Instruction *I) { | |
| return (isa<LoadInst>(I) && isa<AllocaInst>(I->getOperand(0))) || | |
| (isa<StoreInst>(I) && isa<AllocaInst>(I->getOperand(1))); | |
| } | |
| /// Get or calculate the index of the specified instruction. | |
| unsigned getInstructionIndex(const Instruction *I) { | |
| assert(isInterestingInstruction(I) && | |
| "Not a load/store to/from an alloca?"); | |
| // If we already have this instruction number, return it. | |
| DenseMap<const Instruction *, unsigned>::iterator It = InstNumbers.find(I); | |
| if (It != InstNumbers.end()) | |
| return It->second; | |
| // Scan the whole block to get the instruction. This accumulates | |
| // information for every interesting instruction in the block, in order to | |
| // avoid gratuitus rescans. | |
| const BasicBlock *BB = I->getParent(); | |
| unsigned InstNo = 0; | |
| for (const Instruction &BBI : *BB) | |
| if (isInterestingInstruction(&BBI)) | |
| InstNumbers[&BBI] = InstNo++; | |
| It = InstNumbers.find(I); | |
| assert(It != InstNumbers.end() && "Didn't insert instruction?"); | |
| return It->second; | |
| } | |
| void deleteValue(const Instruction *I) { InstNumbers.erase(I); } | |
| void clear() { InstNumbers.clear(); } | |
| }; | |
| struct PromoteMem2Reg { | |
| /// The alloca instructions being promoted. | |
| std::vector<AllocaInst *> Allocas; | |
| DominatorTree &DT; | |
| DIBuilder DIB; | |
| /// A cache of @llvm.assume intrinsics used by SimplifyInstruction. | |
| AssumptionCache *AC; | |
| const SimplifyQuery SQ; | |
| /// Reverse mapping of Allocas. | |
| DenseMap<AllocaInst *, unsigned> AllocaLookup; | |
| /// The PhiNodes we're adding. | |
| /// | |
| /// That map is used to simplify some Phi nodes as we iterate over it, so | |
| /// it should have deterministic iterators. We could use a MapVector, but | |
| /// since basic blocks have numbers, using these are more efficient. | |
| DenseMap<std::pair<unsigned, unsigned>, PHINode *> NewPhiNodes; | |
| /// For each PHI node, keep track of which entry in Allocas it corresponds | |
| /// to. | |
| DenseMap<PHINode *, unsigned> PhiToAllocaMap; | |
| /// For each alloca, we keep track of the dbg.declare record that | |
| /// describes it, if any, so that we can convert it to a dbg.value | |
| /// record if the alloca gets promoted. | |
| SmallVector<AllocaInfo::DPUserVec, 8> AllocaDPUsers; | |
| /// For each alloca, keep an instance of a helper class that gives us an easy | |
| /// way to update assignment tracking debug info if the alloca is promoted. | |
| SmallVector<AssignmentTrackingInfo, 8> AllocaATInfo; | |
| /// For each alloca, the type used by all loads/stores of this alloca. | |
| SmallVector<Type *, 8> AllocaValueTypes; | |
| /// A set of dbg.assigns to delete because they've been demoted to | |
| /// dbg.values. Call cleanUpDbgAssigns to delete them. | |
| SmallPtrSet<DbgVariableRecord *, 8> DVRAssignsToDelete; | |
| /// The set of basic blocks the renamer has already visited. | |
| BitVector Visited; | |
| /// Lazily compute the number of predecessors a block has, indexed by block | |
| /// number. | |
| SmallVector<unsigned> BBNumPreds; | |
| /// The state of incoming values for the current DFS step. | |
| VectorWithUndo<Value *> IncomingVals; | |
| /// The state of incoming locations for the current DFS step. | |
| VectorWithUndo<DebugLoc> IncomingLocs; | |
| // DFS work stack. | |
| SmallVector<RenamePassData, 8> Worklist; | |
| /// Whether the function has the no-signed-zeros-fp-math attribute set. | |
| bool NoSignedZeros = false; | |
| public: | |
| PromoteMem2Reg(ArrayRef<AllocaInst *> Allocas, DominatorTree &DT, | |
| AssumptionCache *AC) | |
| : Allocas(Allocas.begin(), Allocas.end()), DT(DT), | |
| DIB(*DT.getRoot()->getParent()->getParent(), /*AllowUnresolved*/ false), | |
| AC(AC), SQ(DT.getRoot()->getDataLayout(), | |
| nullptr, &DT, AC) {} | |
| void run(); | |
| private: | |
| void RemoveFromAllocasList(unsigned &AllocaIdx) { | |
| Allocas[AllocaIdx] = Allocas.back(); | |
| Allocas.pop_back(); | |
| --AllocaIdx; | |
| } | |
| unsigned getNumPreds(const BasicBlock *BB) { | |
| // BBNumPreds is resized to getMaxBlockNumber() at the beginning. | |
| unsigned &NP = BBNumPreds[BB->getNumber()]; | |
| if (NP == 0) | |
| NP = pred_size(BB) + 1; | |
| return NP - 1; | |
| } | |
| void ComputeLiveInBlocks(AllocaInst *AI, AllocaInfo &Info, | |
| const SmallPtrSetImpl<BasicBlock *> &DefBlocks, | |
| SmallPtrSetImpl<BasicBlock *> &LiveInBlocks); | |
| void RenamePass(BasicBlock *BB, BasicBlock *Pred); | |
| bool QueuePhiNode(BasicBlock *BB, unsigned AllocaIdx, unsigned &Version); | |
| /// Delete dbg.assigns that have been demoted to dbg.values. | |
| void cleanUpDbgAssigns() { | |
| for (auto *DVR : DVRAssignsToDelete) | |
| DVR->eraseFromParent(); | |
| DVRAssignsToDelete.clear(); | |
| } | |
| void pushToWorklist(BasicBlock *BB, BasicBlock *Pred) { | |
| Worklist.emplace_back(BB, Pred, IncomingVals.undoSize(), | |
| IncomingLocs.undoSize()); | |
| } | |
| RenamePassData popFromWorklist() { | |
| RenamePassData R = Worklist.back(); | |
| Worklist.pop_back(); | |
| IncomingVals.undo(R.UndoVals); | |
| IncomingLocs.undo(R.UndoLocs); | |
| return R; | |
| } | |
| }; | |
| } // end anonymous namespace | |
| /// Given a LoadInst LI this adds assume(LI != null) after it. | |
| static void addAssumeNonNull(AssumptionCache *AC, LoadInst *LI) { | |
| Function *AssumeIntrinsic = | |
| Intrinsic::getOrInsertDeclaration(LI->getModule(), Intrinsic::assume); | |
| ICmpInst *LoadNotNull = new ICmpInst(ICmpInst::ICMP_NE, LI, | |
| Constant::getNullValue(LI->getType())); | |
| LoadNotNull->insertAfter(LI->getIterator()); | |
| CallInst *CI = CallInst::Create(AssumeIntrinsic, {LoadNotNull}); | |
| CI->insertAfter(LoadNotNull->getIterator()); | |
| AC->registerAssumption(cast<AssumeInst>(CI)); | |
| } | |
| static void convertMetadataToAssumes(LoadInst *LI, Value *Val, | |
| const DataLayout &DL, AssumptionCache *AC, | |
| const DominatorTree *DT) { | |
| if (isa<UndefValue>(Val) && LI->hasMetadata(LLVMContext::MD_noundef)) { | |
| // Insert non-terminator unreachable. | |
| LLVMContext &Ctx = LI->getContext(); | |
| new StoreInst(ConstantInt::getTrue(Ctx), | |
| PoisonValue::get(PointerType::getUnqual(Ctx)), | |
| /*isVolatile=*/false, Align(1), LI->getIterator()); | |
| return; | |
| } | |
| // If the load was marked as nonnull we don't want to lose that information | |
| // when we erase this Load. So we preserve it with an assume. As !nonnull | |
| // returns poison while assume violations are immediate undefined behavior, | |
| // we can only do this if the value is known non-poison. | |
| if (AC && LI->getMetadata(LLVMContext::MD_nonnull) && | |
| LI->getMetadata(LLVMContext::MD_noundef) && | |
| !isKnownNonZero(Val, SimplifyQuery(DL, DT, AC, LI))) | |
| addAssumeNonNull(AC, LI); | |
| } | |
| static void removeIntrinsicUsers(AllocaInst *AI) { | |
| // Knowing that this alloca is promotable, we know that it's safe to kill all | |
| // instructions except for load and store. | |
| for (Use &U : llvm::make_early_inc_range(AI->uses())) { | |
| Instruction *I = cast<Instruction>(U.getUser()); | |
| if (isa<LoadInst>(I) || isa<StoreInst>(I)) | |
| continue; | |
| // Drop the use of AI in droppable instructions. | |
| if (I->isDroppable()) { | |
| I->dropDroppableUse(U); | |
| continue; | |
| } | |
| if (!I->getType()->isVoidTy()) { | |
| // The only users of this bitcast/GEP instruction are lifetime intrinsics. | |
| // Follow the use/def chain to erase them now instead of leaving it for | |
| // dead code elimination later. | |
| for (Use &UU : llvm::make_early_inc_range(I->uses())) { | |
| Instruction *Inst = cast<Instruction>(UU.getUser()); | |
| // Drop the use of I in droppable instructions. | |
| if (Inst->isDroppable()) { | |
| Inst->dropDroppableUse(UU); | |
| continue; | |
| } | |
| Inst->eraseFromParent(); | |
| } | |
| } | |
| I->eraseFromParent(); | |
| } | |
| } | |
| /// Rewrite as many loads as possible given a single store. | |
| /// | |
| /// When there is only a single store, we can use the domtree to trivially | |
| /// replace all of the dominated loads with the stored value. Do so, and return | |
| /// true if this has successfully promoted the alloca entirely. If this returns | |
| /// false there were some loads which were not dominated by the single store | |
| /// and thus must be phi-ed with undef. We fall back to the standard alloca | |
| /// promotion algorithm in that case. | |
| static bool rewriteSingleStoreAlloca( | |
| AllocaInst *AI, AllocaInfo &Info, LargeBlockInfo &LBI, const DataLayout &DL, | |
| DominatorTree &DT, AssumptionCache *AC, | |
| SmallPtrSet<DbgVariableRecord *, 8> *DVRAssignsToDelete) { | |
| StoreInst *OnlyStore = Info.OnlyStore; | |
| Value *ReplVal = OnlyStore->getOperand(0); | |
| // Loads may either load the stored value or uninitialized memory (undef). | |
| // If the stored value may be poison, then replacing an uninitialized memory | |
| // load with it would be incorrect. If the store dominates the load, we know | |
| // it is always initialized. | |
| bool RequireDominatingStore = | |
| isa<Instruction>(ReplVal) || !isGuaranteedNotToBePoison(ReplVal); | |
| BasicBlock *StoreBB = OnlyStore->getParent(); | |
| int StoreIndex = -1; | |
| // Clear out UsingBlocks. We will reconstruct it here if needed. | |
| Info.UsingBlocks.clear(); | |
| for (User *U : make_early_inc_range(AI->users())) { | |
| Instruction *UserInst = cast<Instruction>(U); | |
| if (UserInst == OnlyStore) | |
| continue; | |
| LoadInst *LI = cast<LoadInst>(UserInst); | |
| // Okay, if we have a load from the alloca, we want to replace it with the | |
| // only value stored to the alloca. We can do this if the value is | |
| // dominated by the store. If not, we use the rest of the mem2reg machinery | |
| // to insert the phi nodes as needed. | |
| if (RequireDominatingStore) { | |
| if (LI->getParent() == StoreBB) { | |
| // If we have a use that is in the same block as the store, compare the | |
| // indices of the two instructions to see which one came first. If the | |
| // load came before the store, we can't handle it. | |
| if (StoreIndex == -1) | |
| StoreIndex = LBI.getInstructionIndex(OnlyStore); | |
| if (unsigned(StoreIndex) > LBI.getInstructionIndex(LI)) { | |
| // Can't handle this load, bail out. | |
| Info.UsingBlocks.push_back(StoreBB); | |
| continue; | |
| } | |
| } else if (!DT.dominates(StoreBB, LI->getParent())) { | |
| // If the load and store are in different blocks, use BB dominance to | |
| // check their relationships. If the store doesn't dom the use, bail | |
| // out. | |
| Info.UsingBlocks.push_back(LI->getParent()); | |
| continue; | |
| } | |
| } | |
| // Otherwise, we *can* safely rewrite this load. | |
| // If the replacement value is the load, this must occur in unreachable | |
| // code. | |
| if (ReplVal == LI) | |
| ReplVal = PoisonValue::get(LI->getType()); | |
| convertMetadataToAssumes(LI, ReplVal, DL, AC, &DT); | |
| LI->replaceAllUsesWith(ReplVal); | |
| LI->eraseFromParent(); | |
| LBI.deleteValue(LI); | |
| } | |
| // Finally, after the scan, check to see if the store is all that is left. | |
| if (!Info.UsingBlocks.empty()) | |
| return false; // If not, we'll have to fall back for the remainder. | |
| DIBuilder DIB(*AI->getModule(), /*AllowUnresolved*/ false); | |
| // Update assignment tracking info for the store we're going to delete. | |
| Info.AssignmentTracking.updateForDeletedStore(Info.OnlyStore, DIB, | |
| DVRAssignsToDelete); | |
| // Record debuginfo for the store and remove the declaration's | |
| // debuginfo. | |
| for (DbgVariableRecord *DbgItem : Info.DPUsers) { | |
| if (DbgItem->isAddressOfVariable()) { | |
| ConvertDebugDeclareToDebugValue(DbgItem, Info.OnlyStore, DIB); | |
| DbgItem->eraseFromParent(); | |
| } else if (DbgItem->isValueOfVariable() && | |
| DbgItem->getExpression()->startsWithDeref()) { | |
| InsertDebugValueAtStoreLoc(DbgItem, Info.OnlyStore, DIB); | |
| DbgItem->eraseFromParent(); | |
| } else if (DbgItem->getExpression()->startsWithDeref()) { | |
| DbgItem->eraseFromParent(); | |
| } | |
| } | |
| // Remove dbg.assigns linked to the alloca as these are now redundant. | |
| at::deleteAssignmentMarkers(AI); | |
| // Remove the (now dead) store and alloca. | |
| Info.OnlyStore->eraseFromParent(); | |
| LBI.deleteValue(Info.OnlyStore); | |
| AI->eraseFromParent(); | |
| return true; | |
| } | |
| /// Many allocas are only used within a single basic block. If this is the | |
| /// case, avoid traversing the CFG and inserting a lot of potentially useless | |
| /// PHI nodes by just performing a single linear pass over the basic block | |
| /// using the Alloca. | |
| /// | |
| /// If we cannot promote this alloca (because it is read before it is written), | |
| /// return false. This is necessary in cases where, due to control flow, the | |
| /// alloca is undefined only on some control flow paths. e.g. code like | |
| /// this is correct in LLVM IR: | |
| /// // A is an alloca with no stores so far | |
| /// for (...) { | |
| /// int t = *A; | |
| /// if (!first_iteration) | |
| /// use(t); | |
| /// *A = 42; | |
| /// } | |
| static bool promoteSingleBlockAlloca( | |
| AllocaInst *AI, const AllocaInfo &Info, LargeBlockInfo &LBI, | |
| const DataLayout &DL, DominatorTree &DT, AssumptionCache *AC, | |
| SmallPtrSet<DbgVariableRecord *, 8> *DVRAssignsToDelete) { | |
| // The trickiest case to handle is when we have large blocks. Because of this, | |
| // this code is optimized assuming that large blocks happen. This does not | |
| // significantly pessimize the small block case. This uses LargeBlockInfo to | |
| // make it efficient to get the index of various operations in the block. | |
| // Walk the use-def list of the alloca, getting the locations of all stores. | |
| using StoresByIndexTy = SmallVector<std::pair<unsigned, StoreInst *>, 64>; | |
| StoresByIndexTy StoresByIndex; | |
| for (User *U : AI->users()) | |
| if (StoreInst *SI = dyn_cast<StoreInst>(U)) | |
| StoresByIndex.push_back(std::make_pair(LBI.getInstructionIndex(SI), SI)); | |
| // Sort the stores by their index, making it efficient to do a lookup with a | |
| // binary search. | |
| llvm::sort(StoresByIndex, less_first()); | |
| // Walk all of the loads from this alloca, replacing them with the nearest | |
| // store above them, if any. | |
| for (User *U : make_early_inc_range(AI->users())) { | |
| LoadInst *LI = dyn_cast<LoadInst>(U); | |
| if (!LI) | |
| continue; | |
| unsigned LoadIdx = LBI.getInstructionIndex(LI); | |
| // Find the nearest store that has a lower index than this load. | |
| StoresByIndexTy::iterator I = llvm::lower_bound( | |
| StoresByIndex, | |
| std::make_pair(LoadIdx, static_cast<StoreInst *>(nullptr)), | |
| less_first()); | |
| Value *ReplVal; | |
| if (I == StoresByIndex.begin()) { | |
| if (StoresByIndex.empty()) | |
| // If there are no stores, the load takes the undef value. | |
| ReplVal = UndefValue::get(LI->getType()); | |
| else | |
| // There is no store before this load, bail out (load may be affected | |
| // by the following stores - see main comment). | |
| return false; | |
| } else { | |
| // Otherwise, there was a store before this load, the load takes its | |
| // value. | |
| ReplVal = std::prev(I)->second->getOperand(0); | |
| } | |
| convertMetadataToAssumes(LI, ReplVal, DL, AC, &DT); | |
| // If the replacement value is the load, this must occur in unreachable | |
| // code. | |
| if (ReplVal == LI) | |
| ReplVal = PoisonValue::get(LI->getType()); | |
| LI->replaceAllUsesWith(ReplVal); | |
| LI->eraseFromParent(); | |
| LBI.deleteValue(LI); | |
| } | |
| // Remove the (now dead) stores and alloca. | |
| DIBuilder DIB(*AI->getModule(), /*AllowUnresolved*/ false); | |
| while (!AI->use_empty()) { | |
| StoreInst *SI = cast<StoreInst>(AI->user_back()); | |
| // Update assignment tracking info for the store we're going to delete. | |
| Info.AssignmentTracking.updateForDeletedStore(SI, DIB, DVRAssignsToDelete); | |
| // Record debuginfo for the store before removing it. | |
| for (DbgVariableRecord *DbgItem : Info.DPUsers) { | |
| if (DbgItem->isAddressOfVariable()) { | |
| ConvertDebugDeclareToDebugValue(DbgItem, SI, DIB); | |
| } | |
| } | |
| SI->eraseFromParent(); | |
| LBI.deleteValue(SI); | |
| } | |
| // Remove dbg.assigns linked to the alloca as these are now redundant. | |
| at::deleteAssignmentMarkers(AI); | |
| AI->eraseFromParent(); | |
| // The alloca's debuginfo can be removed as well. | |
| for (DbgVariableRecord *DbgItem : Info.DPUsers) { | |
| if (DbgItem->isAddressOfVariable() || | |
| DbgItem->getExpression()->startsWithDeref()) | |
| DbgItem->eraseFromParent(); | |
| } | |
| ++NumLocalPromoted; | |
| return true; | |
| } | |
| void PromoteMem2Reg::run() { | |
| Function &F = *DT.getRoot()->getParent(); | |
| AllocaATInfo.resize(Allocas.size()); | |
| AllocaDPUsers.resize(Allocas.size()); | |
| AllocaValueTypes.resize(Allocas.size()); | |
| AllocaInfo Info; | |
| LargeBlockInfo LBI; | |
| ForwardIDFCalculator IDF(DT); | |
| NoSignedZeros = F.getFnAttribute("no-signed-zeros-fp-math").getValueAsBool(); | |
| for (unsigned AllocaNum = 0; AllocaNum != Allocas.size(); ++AllocaNum) { | |
| AllocaInst *AI = Allocas[AllocaNum]; | |
| assert(isAllocaPromotable(AI) && "Cannot promote non-promotable alloca!"); | |
| assert(AI->getParent()->getParent() == &F && | |
| "All allocas should be in the same function, which is same as DF!"); | |
| removeIntrinsicUsers(AI); | |
| if (AI->use_empty()) { | |
| // If there are no uses of the alloca, just delete it now. | |
| AI->eraseFromParent(); | |
| // Remove the alloca from the Allocas list, since it has been processed | |
| RemoveFromAllocasList(AllocaNum); | |
| ++NumDeadAlloca; | |
| continue; | |
| } | |
| // Calculate the set of read and write-locations for each alloca. This is | |
| // analogous to finding the 'uses' and 'definitions' of each variable. | |
| Info.AnalyzeAlloca(AI); | |
| // If there is only a single store to this value, replace any loads of | |
| // it that are directly dominated by the definition with the value stored. | |
| if (Info.DefiningBlocks.size() == 1) { | |
| if (rewriteSingleStoreAlloca(AI, Info, LBI, SQ.DL, DT, AC, | |
| &DVRAssignsToDelete)) { | |
| // The alloca has been processed, move on. | |
| RemoveFromAllocasList(AllocaNum); | |
| ++NumSingleStore; | |
| continue; | |
| } | |
| } | |
| // If the alloca is only read and written in one basic block, just perform a | |
| // linear sweep over the block to eliminate it. | |
| if (Info.OnlyUsedInOneBlock && | |
| promoteSingleBlockAlloca(AI, Info, LBI, SQ.DL, DT, AC, | |
| &DVRAssignsToDelete)) { | |
| // The alloca has been processed, move on. | |
| RemoveFromAllocasList(AllocaNum); | |
| continue; | |
| } | |
| // Initialize BBNumPreds lazily | |
| if (BBNumPreds.empty()) | |
| BBNumPreds.resize(F.getMaxBlockNumber()); | |
| // Remember the dbg.declare record describing this alloca, if any. | |
| if (!Info.AssignmentTracking.empty()) | |
| AllocaATInfo[AllocaNum] = Info.AssignmentTracking; | |
| if (!Info.DPUsers.empty()) | |
| AllocaDPUsers[AllocaNum] = Info.DPUsers; | |
| AllocaValueTypes[AllocaNum] = Info.ValueType; | |
| // Keep the reverse mapping of the 'Allocas' array for the rename pass. | |
| AllocaLookup[Allocas[AllocaNum]] = AllocaNum; | |
| // Unique the set of defining blocks for efficient lookup. | |
| SmallPtrSet<BasicBlock *, 32> DefBlocks(llvm::from_range, | |
| Info.DefiningBlocks); | |
| // Determine which blocks the value is live in. These are blocks which lead | |
| // to uses. | |
| SmallPtrSet<BasicBlock *, 32> LiveInBlocks; | |
| ComputeLiveInBlocks(AI, Info, DefBlocks, LiveInBlocks); | |
| // At this point, we're committed to promoting the alloca using IDF's, and | |
| // the standard SSA construction algorithm. Determine which blocks need phi | |
| // nodes and see if we can optimize out some work by avoiding insertion of | |
| // dead phi nodes. | |
| IDF.setLiveInBlocks(LiveInBlocks); | |
| IDF.setDefiningBlocks(DefBlocks); | |
| SmallVector<BasicBlock *, 32> PHIBlocks; | |
| IDF.calculate(PHIBlocks); | |
| llvm::sort(PHIBlocks, [](BasicBlock *A, BasicBlock *B) { | |
| return A->getNumber() < B->getNumber(); | |
| }); | |
| unsigned CurrentVersion = 0; | |
| for (BasicBlock *BB : PHIBlocks) | |
| QueuePhiNode(BB, AllocaNum, CurrentVersion); | |
| } | |
| if (Allocas.empty()) { | |
| cleanUpDbgAssigns(); | |
| return; // All of the allocas must have been trivial! | |
| } | |
| LBI.clear(); | |
| // Set the incoming values for the basic block to be null values for all of | |
| // the alloca's. We do this in case there is a load of a value that has not | |
| // been stored yet. In this case, it will get this null value. | |
| IncomingVals.resize(Allocas.size()); | |
| for (unsigned i = 0, e = Allocas.size(); i != e; ++i) | |
| IncomingVals.init(i, UndefValue::get(AllocaValueTypes[i])); | |
| // When handling debug info, treat all incoming values as if they have | |
| // compiler-generated (empty) locations, representing the uninitialized | |
| // alloca, until proven otherwise. | |
| IncomingLocs.resize(Allocas.size()); | |
| for (unsigned i = 0, e = Allocas.size(); i != e; ++i) | |
| IncomingLocs.init(i, DebugLoc::getCompilerGenerated()); | |
| // The renamer uses the Visited set to avoid infinite loops. | |
| Visited.resize(F.getMaxBlockNumber(), false); | |
| // Add the entry block to the worklist, with a null predecessor. | |
| pushToWorklist(&F.front(), nullptr); | |
| do { | |
| RenamePassData RPD = popFromWorklist(); | |
| RenamePass(RPD.BB, RPD.Pred); | |
| } while (!Worklist.empty()); | |
| // Remove the allocas themselves from the function. | |
| for (Instruction *A : Allocas) { | |
| // Remove dbg.assigns linked to the alloca as these are now redundant. | |
| at::deleteAssignmentMarkers(A); | |
| // If there are any uses of the alloca instructions left, they must be in | |
| // unreachable basic blocks that were not processed by walking the dominator | |
| // tree. Just delete the users now. | |
| if (!A->use_empty()) | |
| A->replaceAllUsesWith(PoisonValue::get(A->getType())); | |
| A->eraseFromParent(); | |
| } | |
| // Remove alloca's dbg.declare intrinsics from the function. | |
| for (auto &DbgUsers : AllocaDPUsers) { | |
| for (DbgVariableRecord *DbgItem : DbgUsers) | |
| if (DbgItem->isAddressOfVariable() || | |
| DbgItem->getExpression()->startsWithDeref()) | |
| DbgItem->eraseFromParent(); | |
| } | |
| // Loop over all of the PHI nodes and see if there are any that we can get | |
| // rid of because they merge all of the same incoming values. This can | |
| // happen due to undef values coming into the PHI nodes. This process is | |
| // iterative, because eliminating one PHI node can cause others to be removed. | |
| bool EliminatedAPHI = true; | |
| while (EliminatedAPHI) { | |
| EliminatedAPHI = false; | |
| // Iterating over NewPhiNodes is deterministic, so it is safe to try to | |
| // simplify and RAUW them as we go. If it was not, we could add uses to | |
| // the values we replace with in a non-deterministic order, thus creating | |
| // non-deterministic def->use chains. | |
| for (DenseMap<std::pair<unsigned, unsigned>, PHINode *>::iterator | |
| I = NewPhiNodes.begin(), | |
| E = NewPhiNodes.end(); | |
| I != E;) { | |
| PHINode *PN = I->second; | |
| // If this PHI node merges one value and/or undefs, get the value. | |
| if (Value *V = simplifyInstruction(PN, SQ)) { | |
| PN->replaceAllUsesWith(V); | |
| PN->eraseFromParent(); | |
| NewPhiNodes.erase(I++); | |
| EliminatedAPHI = true; | |
| continue; | |
| } | |
| ++I; | |
| } | |
| } | |
| // At this point, the renamer has added entries to PHI nodes for all reachable | |
| // code. Unfortunately, there may be unreachable blocks which the renamer | |
| // hasn't traversed. If this is the case, the PHI nodes may not | |
| // have incoming values for all predecessors. Loop over all PHI nodes we have | |
| // created, inserting poison values if they are missing any incoming values. | |
| for (const auto &PhiNode : NewPhiNodes) { | |
| // We want to do this once per basic block. As such, only process a block | |
| // when we find the PHI that is the first entry in the block. | |
| PHINode *SomePHI = PhiNode.second; | |
| BasicBlock *BB = SomePHI->getParent(); | |
| if (&BB->front() != SomePHI) | |
| continue; | |
| // Only do work here if there the PHI nodes are missing incoming values. We | |
| // know that all PHI nodes that were inserted in a block will have the same | |
| // number of incoming values, so we can just check any of them. | |
| if (SomePHI->getNumIncomingValues() == getNumPreds(BB)) | |
| continue; | |
| // Get the preds for BB. | |
| SmallVector<BasicBlock *, 16> Preds(predecessors(BB)); | |
| // Ok, now we know that all of the PHI nodes are missing entries for some | |
| // basic blocks. Start by sorting the incoming predecessors for efficient | |
| // access. | |
| auto CompareBBNumbers = [](BasicBlock *A, BasicBlock *B) { | |
| return A->getNumber() < B->getNumber(); | |
| }; | |
| llvm::sort(Preds, CompareBBNumbers); | |
| // Now we loop through all BB's which have entries in SomePHI and remove | |
| // them from the Preds list. | |
| for (unsigned i = 0, e = SomePHI->getNumIncomingValues(); i != e; ++i) { | |
| // Do a log(n) search of the Preds list for the entry we want. | |
| SmallVectorImpl<BasicBlock *>::iterator EntIt = llvm::lower_bound( | |
| Preds, SomePHI->getIncomingBlock(i), CompareBBNumbers); | |
| assert(EntIt != Preds.end() && *EntIt == SomePHI->getIncomingBlock(i) && | |
| "PHI node has entry for a block which is not a predecessor!"); | |
| // Remove the entry | |
| Preds.erase(EntIt); | |
| } | |
| // At this point, the blocks left in the preds list must have dummy | |
| // entries inserted into every PHI nodes for the block. Update all the phi | |
| // nodes in this block that we are inserting (there could be phis before | |
| // mem2reg runs). | |
| unsigned NumBadPreds = SomePHI->getNumIncomingValues(); | |
| BasicBlock::iterator BBI = BB->begin(); | |
| while ((SomePHI = dyn_cast<PHINode>(BBI++)) && | |
| SomePHI->getNumIncomingValues() == NumBadPreds) { | |
| Value *PoisonVal = PoisonValue::get(SomePHI->getType()); | |
| for (BasicBlock *Pred : Preds) | |
| SomePHI->addIncoming(PoisonVal, Pred); | |
| } | |
| } | |
| NewPhiNodes.clear(); | |
| cleanUpDbgAssigns(); | |
| } | |
| /// Determine which blocks the value is live in. | |
| /// | |
| /// These are blocks which lead to uses. Knowing this allows us to avoid | |
| /// inserting PHI nodes into blocks which don't lead to uses (thus, the | |
| /// inserted phi nodes would be dead). | |
| void PromoteMem2Reg::ComputeLiveInBlocks( | |
| AllocaInst *AI, AllocaInfo &Info, | |
| const SmallPtrSetImpl<BasicBlock *> &DefBlocks, | |
| SmallPtrSetImpl<BasicBlock *> &LiveInBlocks) { | |
| // To determine liveness, we must iterate through the predecessors of blocks | |
| // where the def is live. Blocks are added to the worklist if we need to | |
| // check their predecessors. Start with all the using blocks. | |
| SmallVector<BasicBlock *, 64> LiveInBlockWorklist(Info.UsingBlocks.begin(), | |
| Info.UsingBlocks.end()); | |
| // If any of the using blocks is also a definition block, check to see if the | |
| // definition occurs before or after the use. If it happens before the use, | |
| // the value isn't really live-in. | |
| for (unsigned i = 0, e = LiveInBlockWorklist.size(); i != e; ++i) { | |
| BasicBlock *BB = LiveInBlockWorklist[i]; | |
| if (!DefBlocks.count(BB)) | |
| continue; | |
| // Okay, this is a block that both uses and defines the value. If the first | |
| // reference to the alloca is a def (store), then we know it isn't live-in. | |
| for (BasicBlock::iterator I = BB->begin();; ++I) { | |
| if (StoreInst *SI = dyn_cast<StoreInst>(I)) { | |
| if (SI->getOperand(1) != AI) | |
| continue; | |
| // We found a store to the alloca before a load. The alloca is not | |
| // actually live-in here. | |
| LiveInBlockWorklist[i] = LiveInBlockWorklist.back(); | |
| LiveInBlockWorklist.pop_back(); | |
| --i; | |
| --e; | |
| break; | |
| } | |
| if (LoadInst *LI = dyn_cast<LoadInst>(I)) | |
| // Okay, we found a load before a store to the alloca. It is actually | |
| // live into this block. | |
| if (LI->getOperand(0) == AI) | |
| break; | |
| } | |
| } | |
| // Now that we have a set of blocks where the phi is live-in, recursively add | |
| // their predecessors until we find the full region the value is live. | |
| while (!LiveInBlockWorklist.empty()) { | |
| BasicBlock *BB = LiveInBlockWorklist.pop_back_val(); | |
| // The block really is live in here, insert it into the set. If already in | |
| // the set, then it has already been processed. | |
| if (!LiveInBlocks.insert(BB).second) | |
| continue; | |
| // Since the value is live into BB, it is either defined in a predecessor or | |
| // live into it to. Add the preds to the worklist unless they are a | |
| // defining block. | |
| for (BasicBlock *P : predecessors(BB)) { | |
| // The value is not live into a predecessor if it defines the value. | |
| if (DefBlocks.count(P)) | |
| continue; | |
| // Otherwise it is, add to the worklist. | |
| LiveInBlockWorklist.push_back(P); | |
| } | |
| } | |
| } | |
| /// Queue a phi-node to be added to a basic-block for a specific Alloca. | |
| /// | |
| /// Returns true if there wasn't already a phi-node for that variable | |
| bool PromoteMem2Reg::QueuePhiNode(BasicBlock *BB, unsigned AllocaNo, | |
| unsigned &Version) { | |
| // Look up the basic-block in question. | |
| PHINode *&PN = NewPhiNodes[std::make_pair(BB->getNumber(), AllocaNo)]; | |
| // If the BB already has a phi node added for the i'th alloca then we're done! | |
| if (PN) | |
| return false; | |
| // Create a PhiNode using the type from loads/stores... and add the phi-node | |
| // to the BasicBlock. | |
| PN = PHINode::Create(AllocaValueTypes[AllocaNo], getNumPreds(BB), | |
| Allocas[AllocaNo]->getName() + "." + Twine(Version++)); | |
| PN->insertBefore(BB->begin()); | |
| ++NumPHIInsert; | |
| PhiToAllocaMap[PN] = AllocaNo; | |
| return true; | |
| } | |
| /// Update the debug location of a phi. \p ApplyMergedLoc indicates whether to | |
| /// create a merged location incorporating \p DL, or to set \p DL directly. | |
| static void updateForIncomingValueLocation(PHINode *PN, DebugLoc DL, | |
| bool ApplyMergedLoc) { | |
| if (ApplyMergedLoc) | |
| PN->applyMergedLocation(PN->getDebugLoc(), DL); | |
| else | |
| PN->setDebugLoc(DL); | |
| } | |
| /// Recursively traverse the CFG of the function, renaming loads and | |
| /// stores to the allocas which we are promoting. | |
| /// | |
| /// IncomingVals indicates what value each Alloca contains on exit from the | |
| /// predecessor block Pred. | |
| void PromoteMem2Reg::RenamePass(BasicBlock *BB, BasicBlock *Pred) { | |
| // If we are inserting any phi nodes into this BB, they will already be in the | |
| // block. | |
| if (PHINode *APN = dyn_cast<PHINode>(BB->begin())) { | |
| // If we have PHI nodes to update, compute the number of edges from Pred to | |
| // BB. | |
| if (PhiToAllocaMap.count(APN)) { | |
| // We want to be able to distinguish between PHI nodes being inserted by | |
| // this invocation of mem2reg from those phi nodes that already existed in | |
| // the IR before mem2reg was run. We determine that APN is being inserted | |
| // because it is missing incoming edges. All other PHI nodes being | |
| // inserted by this pass of mem2reg will have the same number of incoming | |
| // operands so far. Remember this count. | |
| unsigned NewPHINumOperands = APN->getNumOperands(); | |
| unsigned NumEdges = llvm::count(successors(Pred), BB); | |
| assert(NumEdges && "Must be at least one edge from Pred to BB!"); | |
| // Add entries for all the phis. | |
| BasicBlock::iterator PNI = BB->begin(); | |
| do { | |
| unsigned AllocaNo = PhiToAllocaMap[APN]; | |
| // Update the location of the phi node. | |
| updateForIncomingValueLocation(APN, IncomingLocs[AllocaNo], | |
| APN->getNumIncomingValues() > 0); | |
| // Add N incoming values to the PHI node. | |
| for (unsigned i = 0; i != NumEdges; ++i) | |
| APN->addIncoming(IncomingVals[AllocaNo], Pred); | |
| // For the sequence `return X > 0.0 ? X : -X`, it is expected that this | |
| // results in fabs intrinsic. However, without no-signed-zeros(nsz) flag | |
| // on the phi node generated at this stage, fabs folding does not | |
| // happen. So, we try to infer nsz flag from the function attributes to | |
| // enable this fabs folding. | |
| if (isa<FPMathOperator>(APN) && NoSignedZeros) | |
| APN->setHasNoSignedZeros(true); | |
| // The currently active variable for this block is now the PHI. | |
| IncomingVals.set(AllocaNo, APN); | |
| AllocaATInfo[AllocaNo].updateForNewPhi(APN, DIB); | |
| for (DbgVariableRecord *DbgItem : AllocaDPUsers[AllocaNo]) | |
| if (DbgItem->isAddressOfVariable()) | |
| ConvertDebugDeclareToDebugValue(DbgItem, APN, DIB); | |
| // Get the next phi node. | |
| ++PNI; | |
| APN = dyn_cast<PHINode>(PNI); | |
| if (!APN) | |
| break; | |
| // Verify that it is missing entries. If not, it is not being inserted | |
| // by this mem2reg invocation so we want to ignore it. | |
| } while (APN->getNumOperands() == NewPHINumOperands); | |
| } | |
| } | |
| // Don't revisit blocks. | |
| if (Visited.test(BB->getNumber())) | |
| return; | |
| Visited.set(BB->getNumber()); | |
| for (BasicBlock::iterator II = BB->begin(); !II->isTerminator();) { | |
| Instruction *I = &*II++; // get the instruction, increment iterator | |
| if (LoadInst *LI = dyn_cast<LoadInst>(I)) { | |
| AllocaInst *Src = dyn_cast<AllocaInst>(LI->getPointerOperand()); | |
| if (!Src) | |
| continue; | |
| DenseMap<AllocaInst *, unsigned>::iterator AI = AllocaLookup.find(Src); | |
| if (AI == AllocaLookup.end()) | |
| continue; | |
| Value *V = IncomingVals[AI->second]; | |
| convertMetadataToAssumes(LI, V, SQ.DL, AC, &DT); | |
| // Anything using the load now uses the current value. | |
| LI->replaceAllUsesWith(V); | |
| LI->eraseFromParent(); | |
| } else if (StoreInst *SI = dyn_cast<StoreInst>(I)) { | |
| // Delete this instruction and mark the name as the current holder of the | |
| // value | |
| AllocaInst *Dest = dyn_cast<AllocaInst>(SI->getPointerOperand()); | |
| if (!Dest) | |
| continue; | |
| DenseMap<AllocaInst *, unsigned>::iterator ai = AllocaLookup.find(Dest); | |
| if (ai == AllocaLookup.end()) | |
| continue; | |
| // what value were we writing? | |
| unsigned AllocaNo = ai->second; | |
| IncomingVals.set(AllocaNo, SI->getOperand(0)); | |
| // Record debuginfo for the store before removing it. | |
| IncomingLocs.set(AllocaNo, SI->getDebugLoc()); | |
| AllocaATInfo[AllocaNo].updateForDeletedStore(SI, DIB, | |
| &DVRAssignsToDelete); | |
| for (DbgVariableRecord *DbgItem : AllocaDPUsers[ai->second]) | |
| if (DbgItem->isAddressOfVariable()) | |
| ConvertDebugDeclareToDebugValue(DbgItem, SI, DIB); | |
| SI->eraseFromParent(); | |
| } | |
| } | |
| // 'Recurse' to our successors. | |
| // Keep track of the successors so we don't visit the same successor twice | |
| SmallPtrSet<BasicBlock *, 8> VisitedSuccs; | |
| for (BasicBlock *S : reverse(successors(BB))) | |
| if (VisitedSuccs.insert(S).second) | |
| pushToWorklist(S, BB); | |
| } | |
| void llvm::PromoteMemToReg(ArrayRef<AllocaInst *> Allocas, DominatorTree &DT, | |
| AssumptionCache *AC) { | |
| // If there is nothing to do, bail out... | |
| if (Allocas.empty()) | |
| return; | |
| PromoteMem2Reg(Allocas, DT, AC).run(); | |
| } |