| //===- LiveDebugVariables.cpp - Tracking debug info variables -------------===// | |
| // | |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. | |
| // See https://llvm.org/LICENSE.txt for license information. | |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| // This file implements the LiveDebugVariables analysis. | |
| // | |
| // Remove all DBG_VALUE instructions referencing virtual registers and replace | |
| // them with a data structure tracking where live user variables are kept - in a | |
| // virtual register or in a stack slot. | |
| // | |
| // Allow the data structure to be updated during register allocation when values | |
| // are moved between registers and stack slots. Finally emit new DBG_VALUE | |
| // instructions after register allocation is complete. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #include "llvm/CodeGen/LiveDebugVariables.h" | |
| #include "llvm/ADT/ArrayRef.h" | |
| #include "llvm/ADT/DenseMap.h" | |
| #include "llvm/ADT/IntervalMap.h" | |
| #include "llvm/ADT/MapVector.h" | |
| #include "llvm/ADT/STLExtras.h" | |
| #include "llvm/ADT/SmallSet.h" | |
| #include "llvm/ADT/SmallVector.h" | |
| #include "llvm/ADT/Statistic.h" | |
| #include "llvm/ADT/StringRef.h" | |
| #include "llvm/BinaryFormat/Dwarf.h" | |
| #include "llvm/CodeGen/LexicalScopes.h" | |
| #include "llvm/CodeGen/LiveInterval.h" | |
| #include "llvm/CodeGen/LiveIntervals.h" | |
| #include "llvm/CodeGen/MachineBasicBlock.h" | |
| #include "llvm/CodeGen/MachineDominators.h" | |
| #include "llvm/CodeGen/MachineFunction.h" | |
| #include "llvm/CodeGen/MachineInstr.h" | |
| #include "llvm/CodeGen/MachineInstrBuilder.h" | |
| #include "llvm/CodeGen/MachineOperand.h" | |
| #include "llvm/CodeGen/MachinePassManager.h" | |
| #include "llvm/CodeGen/MachineRegisterInfo.h" | |
| #include "llvm/CodeGen/SlotIndexes.h" | |
| #include "llvm/CodeGen/TargetInstrInfo.h" | |
| #include "llvm/CodeGen/TargetOpcodes.h" | |
| #include "llvm/CodeGen/TargetRegisterInfo.h" | |
| #include "llvm/CodeGen/TargetSubtargetInfo.h" | |
| #include "llvm/CodeGen/VirtRegMap.h" | |
| #include "llvm/Config/llvm-config.h" | |
| #include "llvm/IR/DebugInfoMetadata.h" | |
| #include "llvm/IR/DebugLoc.h" | |
| #include "llvm/IR/Function.h" | |
| #include "llvm/InitializePasses.h" | |
| #include "llvm/Pass.h" | |
| #include "llvm/Support/Casting.h" | |
| #include "llvm/Support/CommandLine.h" | |
| #include "llvm/Support/Debug.h" | |
| #include "llvm/Support/raw_ostream.h" | |
| #include <algorithm> | |
| #include <cassert> | |
| #include <iterator> | |
| #include <map> | |
| #include <memory> | |
| #include <optional> | |
| #include <utility> | |
| using namespace llvm; | |
| #define DEBUG_TYPE "livedebugvars" | |
| static cl::opt<bool> | |
| EnableLDV("live-debug-variables", cl::init(true), | |
| cl::desc("Enable the live debug variables pass"), cl::Hidden); | |
| STATISTIC(NumInsertedDebugValues, "Number of DBG_VALUEs inserted"); | |
| STATISTIC(NumInsertedDebugLabels, "Number of DBG_LABELs inserted"); | |
| char LiveDebugVariablesWrapperLegacy::ID = 0; | |
| INITIALIZE_PASS_BEGIN(LiveDebugVariablesWrapperLegacy, DEBUG_TYPE, | |
| "Debug Variable Analysis", false, false) | |
| INITIALIZE_PASS_DEPENDENCY(MachineDominatorTreeWrapperPass) | |
| INITIALIZE_PASS_DEPENDENCY(LiveIntervalsWrapperPass) | |
| INITIALIZE_PASS_END(LiveDebugVariablesWrapperLegacy, DEBUG_TYPE, | |
| "Debug Variable Analysis", false, true) | |
| void LiveDebugVariablesWrapperLegacy::getAnalysisUsage( | |
| AnalysisUsage &AU) const { | |
| AU.addRequired<MachineDominatorTreeWrapperPass>(); | |
| AU.addRequiredTransitive<LiveIntervalsWrapperPass>(); | |
| AU.setPreservesAll(); | |
| MachineFunctionPass::getAnalysisUsage(AU); | |
| } | |
| LiveDebugVariablesWrapperLegacy::LiveDebugVariablesWrapperLegacy() | |
| : MachineFunctionPass(ID) {} | |
| enum : unsigned { UndefLocNo = ~0U }; | |
| namespace { | |
| /// Describes a debug variable value by location number and expression along | |
| /// with some flags about the original usage of the location. | |
| class DbgVariableValue { | |
| public: | |
| DbgVariableValue(ArrayRef<unsigned> NewLocs, bool WasIndirect, bool WasList, | |
| const DIExpression &Expr) | |
| : WasIndirect(WasIndirect), WasList(WasList), Expression(&Expr) { | |
| assert(!(WasIndirect && WasList) && | |
| "DBG_VALUE_LISTs should not be indirect."); | |
| SmallVector<unsigned> LocNoVec; | |
| for (unsigned LocNo : NewLocs) { | |
| auto It = find(LocNoVec, LocNo); | |
| if (It == LocNoVec.end()) | |
| LocNoVec.push_back(LocNo); | |
| else { | |
| // Loc duplicates an element in LocNos; replace references to Op | |
| // with references to the duplicating element. | |
| unsigned OpIdx = LocNoVec.size(); | |
| unsigned DuplicatingIdx = std::distance(LocNoVec.begin(), It); | |
| Expression = | |
| DIExpression::replaceArg(Expression, OpIdx, DuplicatingIdx); | |
| } | |
| } | |
| // FIXME: Debug values referencing 64+ unique machine locations are rare and | |
| // currently unsupported for performance reasons. If we can verify that | |
| // performance is acceptable for such debug values, we can increase the | |
| // bit-width of LocNoCount to 14 to enable up to 16384 unique machine | |
| // locations. We will also need to verify that this does not cause issues | |
| // with LiveDebugVariables' use of IntervalMap. | |
| if (LocNoVec.size() < 64) { | |
| LocNoCount = LocNoVec.size(); | |
| if (LocNoCount > 0) { | |
| LocNos = std::make_unique<unsigned[]>(LocNoCount); | |
| llvm::copy(LocNoVec, loc_nos_begin()); | |
| } | |
| } else { | |
| LLVM_DEBUG(dbgs() << "Found debug value with 64+ unique machine " | |
| "locations, dropping...\n"); | |
| LocNoCount = 1; | |
| // Turn this into an undef debug value list; right now, the simplest form | |
| // of this is an expression with one arg, and an undef debug operand. | |
| Expression = | |
| DIExpression::get(Expr.getContext(), {dwarf::DW_OP_LLVM_arg, 0}); | |
| if (auto FragmentInfoOpt = Expr.getFragmentInfo()) | |
| Expression = *DIExpression::createFragmentExpression( | |
| Expression, FragmentInfoOpt->OffsetInBits, | |
| FragmentInfoOpt->SizeInBits); | |
| LocNos = std::make_unique<unsigned[]>(LocNoCount); | |
| LocNos[0] = UndefLocNo; | |
| } | |
| } | |
| DbgVariableValue() : LocNoCount(0), WasIndirect(false), WasList(false) {} | |
| DbgVariableValue(const DbgVariableValue &Other) | |
| : LocNoCount(Other.LocNoCount), WasIndirect(Other.getWasIndirect()), | |
| WasList(Other.getWasList()), Expression(Other.getExpression()) { | |
| if (Other.getLocNoCount()) { | |
| LocNos.reset(new unsigned[Other.getLocNoCount()]); | |
| std::copy(Other.loc_nos_begin(), Other.loc_nos_end(), loc_nos_begin()); | |
| } | |
| } | |
| DbgVariableValue &operator=(const DbgVariableValue &Other) { | |
| if (this == &Other) | |
| return *this; | |
| if (Other.getLocNoCount()) { | |
| LocNos.reset(new unsigned[Other.getLocNoCount()]); | |
| std::copy(Other.loc_nos_begin(), Other.loc_nos_end(), loc_nos_begin()); | |
| } else { | |
| LocNos.release(); | |
| } | |
| LocNoCount = Other.getLocNoCount(); | |
| WasIndirect = Other.getWasIndirect(); | |
| WasList = Other.getWasList(); | |
| Expression = Other.getExpression(); | |
| return *this; | |
| } | |
| const DIExpression *getExpression() const { return Expression; } | |
| uint8_t getLocNoCount() const { return LocNoCount; } | |
| bool containsLocNo(unsigned LocNo) const { | |
| return is_contained(loc_nos(), LocNo); | |
| } | |
| bool getWasIndirect() const { return WasIndirect; } | |
| bool getWasList() const { return WasList; } | |
| bool isUndef() const { return LocNoCount == 0 || containsLocNo(UndefLocNo); } | |
| DbgVariableValue decrementLocNosAfterPivot(unsigned Pivot) const { | |
| SmallVector<unsigned, 4> NewLocNos; | |
| for (unsigned LocNo : loc_nos()) | |
| NewLocNos.push_back(LocNo != UndefLocNo && LocNo > Pivot ? LocNo - 1 | |
| : LocNo); | |
| return DbgVariableValue(NewLocNos, WasIndirect, WasList, *Expression); | |
| } | |
| DbgVariableValue remapLocNos(ArrayRef<unsigned> LocNoMap) const { | |
| SmallVector<unsigned> NewLocNos; | |
| for (unsigned LocNo : loc_nos()) | |
| // Undef values don't exist in locations (and thus not in LocNoMap | |
| // either) so skip over them. See getLocationNo(). | |
| NewLocNos.push_back(LocNo == UndefLocNo ? UndefLocNo : LocNoMap[LocNo]); | |
| return DbgVariableValue(NewLocNos, WasIndirect, WasList, *Expression); | |
| } | |
| DbgVariableValue changeLocNo(unsigned OldLocNo, unsigned NewLocNo) const { | |
| SmallVector<unsigned> NewLocNos; | |
| NewLocNos.assign(loc_nos_begin(), loc_nos_end()); | |
| auto OldLocIt = find(NewLocNos, OldLocNo); | |
| assert(OldLocIt != NewLocNos.end() && "Old location must be present."); | |
| *OldLocIt = NewLocNo; | |
| return DbgVariableValue(NewLocNos, WasIndirect, WasList, *Expression); | |
| } | |
| bool hasLocNoGreaterThan(unsigned LocNo) const { | |
| return any_of(loc_nos(), | |
| [LocNo](unsigned ThisLocNo) { return ThisLocNo > LocNo; }); | |
| } | |
| void printLocNos(llvm::raw_ostream &OS) const { | |
| for (const unsigned &Loc : loc_nos()) | |
| OS << (&Loc == loc_nos_begin() ? " " : ", ") << Loc; | |
| } | |
| friend inline bool operator==(const DbgVariableValue &LHS, | |
| const DbgVariableValue &RHS) { | |
| if (std::tie(LHS.LocNoCount, LHS.WasIndirect, LHS.WasList, | |
| LHS.Expression) != | |
| std::tie(RHS.LocNoCount, RHS.WasIndirect, RHS.WasList, RHS.Expression)) | |
| return false; | |
| return std::equal(LHS.loc_nos_begin(), LHS.loc_nos_end(), | |
| RHS.loc_nos_begin()); | |
| } | |
| friend inline bool operator!=(const DbgVariableValue &LHS, | |
| const DbgVariableValue &RHS) { | |
| return !(LHS == RHS); | |
| } | |
| unsigned *loc_nos_begin() { return LocNos.get(); } | |
| const unsigned *loc_nos_begin() const { return LocNos.get(); } | |
| unsigned *loc_nos_end() { return LocNos.get() + LocNoCount; } | |
| const unsigned *loc_nos_end() const { return LocNos.get() + LocNoCount; } | |
| ArrayRef<unsigned> loc_nos() const { | |
| return ArrayRef<unsigned>(LocNos.get(), LocNoCount); | |
| } | |
| private: | |
| // IntervalMap requires the value object to be very small, to the extent | |
| // that we do not have enough room for an std::vector. Using a C-style array | |
| // (with a unique_ptr wrapper for convenience) allows us to optimize for this | |
| // specific case by packing the array size into only 6 bits (it is highly | |
| // unlikely that any debug value will need 64+ locations). | |
| std::unique_ptr<unsigned[]> LocNos; | |
| uint8_t LocNoCount : 6; | |
| bool WasIndirect : 1; | |
| bool WasList : 1; | |
| const DIExpression *Expression = nullptr; | |
| }; | |
| } // namespace | |
| /// Map of where a user value is live to that value. | |
| using LocMap = IntervalMap<SlotIndex, DbgVariableValue, 4>; | |
| /// Map of stack slot offsets for spilled locations. | |
| /// Non-spilled locations are not added to the map. | |
| using SpillOffsetMap = DenseMap<unsigned, unsigned>; | |
| /// Cache to save the location where it can be used as the starting | |
| /// position as input for calling MachineBasicBlock::SkipPHIsLabelsAndDebug. | |
| /// This is to prevent MachineBasicBlock::SkipPHIsLabelsAndDebug from | |
| /// repeatedly searching the same set of PHIs/Labels/Debug instructions | |
| /// if it is called many times for the same block. | |
| using BlockSkipInstsMap = | |
| DenseMap<MachineBasicBlock *, MachineBasicBlock::iterator>; | |
| namespace { | |
| /// A user value is a part of a debug info user variable. | |
| /// | |
| /// A DBG_VALUE instruction notes that (a sub-register of) a virtual register | |
| /// holds part of a user variable. The part is identified by a byte offset. | |
| /// | |
| /// UserValues are grouped into equivalence classes for easier searching. Two | |
| /// user values are related if they are held by the same virtual register. The | |
| /// equivalence class is the transitive closure of that relation. | |
| class UserValue { | |
| using LDVImpl = LiveDebugVariables::LDVImpl; | |
| const DILocalVariable *Variable; ///< The debug info variable we are part of. | |
| /// The part of the variable we describe. | |
| const std::optional<DIExpression::FragmentInfo> Fragment; | |
| DebugLoc dl; ///< The debug location for the variable. This is | |
| ///< used by dwarf writer to find lexical scope. | |
| UserValue *leader; ///< Equivalence class leader. | |
| UserValue *next = nullptr; ///< Next value in equivalence class, or null. | |
| /// Numbered locations referenced by locmap. | |
| SmallVector<MachineOperand, 4> locations; | |
| /// Map of slot indices where this value is live. | |
| LocMap locInts; | |
| /// Set of interval start indexes that have been trimmed to the | |
| /// lexical scope. | |
| SmallSet<SlotIndex, 2> trimmedDefs; | |
| /// Insert a DBG_VALUE into MBB at Idx for DbgValue. | |
| void insertDebugValue(MachineBasicBlock *MBB, SlotIndex StartIdx, | |
| SlotIndex StopIdx, DbgVariableValue DbgValue, | |
| ArrayRef<bool> LocSpills, | |
| ArrayRef<unsigned> SpillOffsets, LiveIntervals &LIS, | |
| const TargetInstrInfo &TII, | |
| const TargetRegisterInfo &TRI, | |
| BlockSkipInstsMap &BBSkipInstsMap); | |
| /// Replace OldLocNo ranges with NewRegs ranges where NewRegs | |
| /// is live. Returns true if any changes were made. | |
| bool splitLocation(unsigned OldLocNo, ArrayRef<Register> NewRegs, | |
| LiveIntervals &LIS); | |
| public: | |
| /// Create a new UserValue. | |
| UserValue(const DILocalVariable *var, | |
| std::optional<DIExpression::FragmentInfo> Fragment, DebugLoc L, | |
| LocMap::Allocator &alloc) | |
| : Variable(var), Fragment(Fragment), dl(std::move(L)), leader(this), | |
| locInts(alloc) {} | |
| /// Get the leader of this value's equivalence class. | |
| UserValue *getLeader() { | |
| UserValue *l = leader; | |
| while (l != l->leader) | |
| l = l->leader; | |
| return leader = l; | |
| } | |
| /// Return the next UserValue in the equivalence class. | |
| UserValue *getNext() const { return next; } | |
| /// Merge equivalence classes. | |
| static UserValue *merge(UserValue *L1, UserValue *L2) { | |
| L2 = L2->getLeader(); | |
| if (!L1) | |
| return L2; | |
| L1 = L1->getLeader(); | |
| if (L1 == L2) | |
| return L1; | |
| // Splice L2 before L1's members. | |
| UserValue *End = L2; | |
| while (End->next) { | |
| End->leader = L1; | |
| End = End->next; | |
| } | |
| End->leader = L1; | |
| End->next = L1->next; | |
| L1->next = L2; | |
| return L1; | |
| } | |
| /// Return the location number that matches Loc. | |
| /// | |
| /// For undef values we always return location number UndefLocNo without | |
| /// inserting anything in locations. Since locations is a vector and the | |
| /// location number is the position in the vector and UndefLocNo is ~0, | |
| /// we would need a very big vector to put the value at the right position. | |
| unsigned getLocationNo(const MachineOperand &LocMO) { | |
| if (LocMO.isReg()) { | |
| if (LocMO.getReg() == 0) | |
| return UndefLocNo; | |
| // For register locations we dont care about use/def and other flags. | |
| for (unsigned i = 0, e = locations.size(); i != e; ++i) | |
| if (locations[i].isReg() && | |
| locations[i].getReg() == LocMO.getReg() && | |
| locations[i].getSubReg() == LocMO.getSubReg()) | |
| return i; | |
| } else | |
| for (unsigned i = 0, e = locations.size(); i != e; ++i) | |
| if (LocMO.isIdenticalTo(locations[i])) | |
| return i; | |
| locations.push_back(LocMO); | |
| // We are storing a MachineOperand outside a MachineInstr. | |
| locations.back().clearParent(); | |
| // Don't store def operands. | |
| if (locations.back().isReg()) { | |
| if (locations.back().isDef()) | |
| locations.back().setIsDead(false); | |
| locations.back().setIsUse(); | |
| } | |
| return locations.size() - 1; | |
| } | |
| /// Remove (recycle) a location number. If \p LocNo still is used by the | |
| /// locInts nothing is done. | |
| void removeLocationIfUnused(unsigned LocNo) { | |
| // Bail out if LocNo still is used. | |
| for (LocMap::const_iterator I = locInts.begin(); I.valid(); ++I) { | |
| const DbgVariableValue &DbgValue = I.value(); | |
| if (DbgValue.containsLocNo(LocNo)) | |
| return; | |
| } | |
| // Remove the entry in the locations vector, and adjust all references to | |
| // location numbers above the removed entry. | |
| locations.erase(locations.begin() + LocNo); | |
| for (LocMap::iterator I = locInts.begin(); I.valid(); ++I) { | |
| const DbgVariableValue &DbgValue = I.value(); | |
| if (DbgValue.hasLocNoGreaterThan(LocNo)) | |
| I.setValueUnchecked(DbgValue.decrementLocNosAfterPivot(LocNo)); | |
| } | |
| } | |
| /// Ensure that all virtual register locations are mapped. | |
| void mapVirtRegs(LDVImpl *LDV); | |
| /// Add a definition point to this user value. | |
| void addDef(SlotIndex Idx, ArrayRef<MachineOperand> LocMOs, bool IsIndirect, | |
| bool IsList, const DIExpression &Expr) { | |
| SmallVector<unsigned> Locs; | |
| for (const MachineOperand &Op : LocMOs) | |
| Locs.push_back(getLocationNo(Op)); | |
| DbgVariableValue DbgValue(Locs, IsIndirect, IsList, Expr); | |
| // Add a singular (Idx,Idx) -> value mapping. | |
| LocMap::iterator I = locInts.find(Idx); | |
| if (!I.valid() || I.start() != Idx) | |
| I.insert(Idx, Idx.getNextSlot(), std::move(DbgValue)); | |
| else | |
| // A later DBG_VALUE at the same SlotIndex overrides the old location. | |
| I.setValue(std::move(DbgValue)); | |
| } | |
| /// Extend the current definition as far as possible down. | |
| /// | |
| /// Stop when meeting an existing def or when leaving the live | |
| /// range of VNI. End points where VNI is no longer live are added to Kills. | |
| /// | |
| /// We only propagate DBG_VALUES locally here. LiveDebugValues performs a | |
| /// data-flow analysis to propagate them beyond basic block boundaries. | |
| /// | |
| /// \param Idx Starting point for the definition. | |
| /// \param DbgValue value to propagate. | |
| /// \param LiveIntervalInfo For each location number key in this map, | |
| /// restricts liveness to where the LiveRange has the value equal to the\ | |
| /// VNInfo. | |
| /// \param [out] Kills Append end points of VNI's live range to Kills. | |
| /// \param LIS Live intervals analysis. | |
| void | |
| extendDef(SlotIndex Idx, DbgVariableValue DbgValue, | |
| SmallDenseMap<unsigned, std::pair<LiveRange *, const VNInfo *>> | |
| &LiveIntervalInfo, | |
| std::optional<std::pair<SlotIndex, SmallVector<unsigned>>> &Kills, | |
| LiveIntervals &LIS); | |
| /// The value in LI may be copies to other registers. Determine if | |
| /// any of the copies are available at the kill points, and add defs if | |
| /// possible. | |
| /// | |
| /// \param DbgValue Location number of LI->reg, and DIExpression. | |
| /// \param LocIntervals Scan for copies of the value for each location in the | |
| /// corresponding LiveInterval->reg. | |
| /// \param KilledAt The point where the range of DbgValue could be extended. | |
| /// \param [in,out] NewDefs Append (Idx, DbgValue) of inserted defs here. | |
| void addDefsFromCopies( | |
| DbgVariableValue DbgValue, | |
| SmallVectorImpl<std::pair<unsigned, LiveInterval *>> &LocIntervals, | |
| SlotIndex KilledAt, | |
| SmallVectorImpl<std::pair<SlotIndex, DbgVariableValue>> &NewDefs, | |
| MachineRegisterInfo &MRI, LiveIntervals &LIS); | |
| /// Compute the live intervals of all locations after collecting all their | |
| /// def points. | |
| void computeIntervals(MachineRegisterInfo &MRI, const TargetRegisterInfo &TRI, | |
| LiveIntervals &LIS, LexicalScopes &LS); | |
| /// Replace OldReg ranges with NewRegs ranges where NewRegs is | |
| /// live. Returns true if any changes were made. | |
| bool splitRegister(Register OldReg, ArrayRef<Register> NewRegs, | |
| LiveIntervals &LIS); | |
| /// Rewrite virtual register locations according to the provided virtual | |
| /// register map. Record the stack slot offsets for the locations that | |
| /// were spilled. | |
| void rewriteLocations(VirtRegMap &VRM, const MachineFunction &MF, | |
| const TargetInstrInfo &TII, | |
| const TargetRegisterInfo &TRI, | |
| SpillOffsetMap &SpillOffsets); | |
| /// Recreate DBG_VALUE instruction from data structures. | |
| void emitDebugValues(VirtRegMap *VRM, LiveIntervals &LIS, | |
| const TargetInstrInfo &TII, | |
| const TargetRegisterInfo &TRI, | |
| const SpillOffsetMap &SpillOffsets, | |
| BlockSkipInstsMap &BBSkipInstsMap); | |
| /// Return DebugLoc of this UserValue. | |
| const DebugLoc &getDebugLoc() { return dl; } | |
| void print(raw_ostream &, const TargetRegisterInfo *); | |
| }; | |
| /// A user label is a part of a debug info user label. | |
| class UserLabel { | |
| const DILabel *Label; ///< The debug info label we are part of. | |
| DebugLoc dl; ///< The debug location for the label. This is | |
| ///< used by dwarf writer to find lexical scope. | |
| SlotIndex loc; ///< Slot used by the debug label. | |
| /// Insert a DBG_LABEL into MBB at Idx. | |
| void insertDebugLabel(MachineBasicBlock *MBB, SlotIndex Idx, | |
| LiveIntervals &LIS, const TargetInstrInfo &TII, | |
| BlockSkipInstsMap &BBSkipInstsMap); | |
| public: | |
| /// Create a new UserLabel. | |
| UserLabel(const DILabel *label, DebugLoc L, SlotIndex Idx) | |
| : Label(label), dl(std::move(L)), loc(Idx) {} | |
| /// Does this UserLabel match the parameters? | |
| bool matches(const DILabel *L, const DILocation *IA, | |
| const SlotIndex Index) const { | |
| return Label == L && dl->getInlinedAt() == IA && loc == Index; | |
| } | |
| /// Recreate DBG_LABEL instruction from data structures. | |
| void emitDebugLabel(LiveIntervals &LIS, const TargetInstrInfo &TII, | |
| BlockSkipInstsMap &BBSkipInstsMap); | |
| /// Return DebugLoc of this UserLabel. | |
| const DebugLoc &getDebugLoc() { return dl; } | |
| void print(raw_ostream &, const TargetRegisterInfo *); | |
| }; | |
| } // end anonymous namespace | |
| namespace llvm { | |
| class LiveDebugVariables::LDVImpl { | |
| LocMap::Allocator allocator; | |
| MachineFunction *MF = nullptr; | |
| LiveIntervals *LIS; | |
| const TargetRegisterInfo *TRI; | |
| /// Position and VReg of a PHI instruction during register allocation. | |
| struct PHIValPos { | |
| SlotIndex SI; /// Slot where this PHI occurs. | |
| Register Reg; /// VReg this PHI occurs in. | |
| unsigned SubReg; /// Qualifiying subregister for Reg. | |
| }; | |
| /// Map from debug instruction number to PHI position during allocation. | |
| std::map<unsigned, PHIValPos> PHIValToPos; | |
| /// Index of, for each VReg, which debug instruction numbers and corresponding | |
| /// PHIs are sensitive to splitting. Each VReg may have multiple PHI defs, | |
| /// at different positions. | |
| DenseMap<Register, std::vector<unsigned>> RegToPHIIdx; | |
| /// Record for any debug instructions unlinked from their blocks during | |
| /// regalloc. Stores the instr and it's location, so that they can be | |
| /// re-inserted after regalloc is over. | |
| struct InstrPos { | |
| MachineInstr *MI; ///< Debug instruction, unlinked from it's block. | |
| SlotIndex Idx; ///< Slot position where MI should be re-inserted. | |
| MachineBasicBlock *MBB; ///< Block that MI was in. | |
| }; | |
| /// Collection of stored debug instructions, preserved until after regalloc. | |
| SmallVector<InstrPos, 32> StashedDebugInstrs; | |
| /// Whether emitDebugValues is called. | |
| bool EmitDone = false; | |
| /// Whether the machine function is modified during the pass. | |
| bool ModifiedMF = false; | |
| /// All allocated UserValue instances. | |
| SmallVector<std::unique_ptr<UserValue>, 8> userValues; | |
| /// All allocated UserLabel instances. | |
| SmallVector<std::unique_ptr<UserLabel>, 2> userLabels; | |
| /// Map virtual register to eq class leader. | |
| using VRMap = DenseMap<Register, UserValue *>; | |
| VRMap virtRegToEqClass; | |
| /// Map to find existing UserValue instances. | |
| using UVMap = DenseMap<DebugVariable, UserValue *>; | |
| UVMap userVarMap; | |
| /// Find or create a UserValue. | |
| UserValue *getUserValue(const DILocalVariable *Var, | |
| std::optional<DIExpression::FragmentInfo> Fragment, | |
| const DebugLoc &DL); | |
| /// Find the EC leader for VirtReg or null. | |
| UserValue *lookupVirtReg(Register VirtReg); | |
| /// Add DBG_VALUE instruction to our maps. | |
| /// | |
| /// \param MI DBG_VALUE instruction | |
| /// \param Idx Last valid SLotIndex before instruction. | |
| /// | |
| /// \returns True if the DBG_VALUE instruction should be deleted. | |
| bool handleDebugValue(MachineInstr &MI, SlotIndex Idx); | |
| /// Track variable location debug instructions while using the instruction | |
| /// referencing implementation. Such debug instructions do not need to be | |
| /// updated during regalloc because they identify instructions rather than | |
| /// register locations. However, they needs to be removed from the | |
| /// MachineFunction during regalloc, then re-inserted later, to avoid | |
| /// disrupting the allocator. | |
| /// | |
| /// \param MI Any DBG_VALUE / DBG_INSTR_REF / DBG_PHI instruction | |
| /// \param Idx Last valid SlotIndex before instruction | |
| /// | |
| /// \returns Iterator to continue processing from after unlinking. | |
| MachineBasicBlock::iterator handleDebugInstr(MachineInstr &MI, SlotIndex Idx); | |
| /// Add DBG_LABEL instruction to UserLabel. | |
| /// | |
| /// \param MI DBG_LABEL instruction | |
| /// \param Idx Last valid SlotIndex before instruction. | |
| /// | |
| /// \returns True if the DBG_LABEL instruction should be deleted. | |
| bool handleDebugLabel(MachineInstr &MI, SlotIndex Idx); | |
| /// Collect and erase all DBG_VALUE instructions, adding a UserValue def | |
| /// for each instruction. | |
| /// | |
| /// \param mf MachineFunction to be scanned. | |
| /// \param InstrRef Whether to operate in instruction referencing mode. If | |
| /// true, most of LiveDebugVariables doesn't run. | |
| /// | |
| /// \returns True if any debug values were found. | |
| bool collectDebugValues(MachineFunction &mf, bool InstrRef); | |
| /// Compute the live intervals of all user values after collecting all | |
| /// their def points. | |
| void computeIntervals(); | |
| public: | |
| LDVImpl(LiveIntervals *LIS) : LIS(LIS) {} | |
| bool runOnMachineFunction(MachineFunction &mf, bool InstrRef); | |
| /// Release all memory. | |
| void clear() { | |
| MF = nullptr; | |
| PHIValToPos.clear(); | |
| RegToPHIIdx.clear(); | |
| StashedDebugInstrs.clear(); | |
| userValues.clear(); | |
| userLabels.clear(); | |
| virtRegToEqClass.clear(); | |
| userVarMap.clear(); | |
| // Make sure we call emitDebugValues if the machine function was modified. | |
| assert((!ModifiedMF || EmitDone) && | |
| "Dbg values are not emitted in LDV"); | |
| EmitDone = false; | |
| ModifiedMF = false; | |
| } | |
| /// Map virtual register to an equivalence class. | |
| void mapVirtReg(Register VirtReg, UserValue *EC); | |
| /// Replace any PHI referring to OldReg with its corresponding NewReg, if | |
| /// present. | |
| void splitPHIRegister(Register OldReg, ArrayRef<Register> NewRegs); | |
| /// Replace all references to OldReg with NewRegs. | |
| void splitRegister(Register OldReg, ArrayRef<Register> NewRegs); | |
| /// Recreate DBG_VALUE instruction from data structures. | |
| void emitDebugValues(VirtRegMap *VRM); | |
| void print(raw_ostream&); | |
| }; | |
| /// Implementation of the LiveDebugVariables pass. | |
| LiveDebugVariables::LiveDebugVariables() = default; | |
| LiveDebugVariables::~LiveDebugVariables() = default; | |
| LiveDebugVariables::LiveDebugVariables(LiveDebugVariables &&) = default; | |
| } // namespace llvm | |
| static void printDebugLoc(const DebugLoc &DL, raw_ostream &CommentOS, | |
| const LLVMContext &Ctx) { | |
| if (!DL) | |
| return; | |
| auto *Scope = cast<DIScope>(DL.getScope()); | |
| // Omit the directory, because it's likely to be long and uninteresting. | |
| CommentOS << Scope->getFilename(); | |
| CommentOS << ':' << DL.getLine(); | |
| if (DL.getCol() != 0) | |
| CommentOS << ':' << DL.getCol(); | |
| DebugLoc InlinedAtDL = DL.getInlinedAt(); | |
| if (!InlinedAtDL) | |
| return; | |
| CommentOS << " @[ "; | |
| printDebugLoc(InlinedAtDL, CommentOS, Ctx); | |
| CommentOS << " ]"; | |
| } | |
| static void printExtendedName(raw_ostream &OS, const DINode *Node, | |
| const DILocation *DL) { | |
| const LLVMContext &Ctx = Node->getContext(); | |
| StringRef Res; | |
| unsigned Line = 0; | |
| if (const auto *V = dyn_cast<const DILocalVariable>(Node)) { | |
| Res = V->getName(); | |
| Line = V->getLine(); | |
| } else if (const auto *L = dyn_cast<const DILabel>(Node)) { | |
| Res = L->getName(); | |
| Line = L->getLine(); | |
| } | |
| if (!Res.empty()) | |
| OS << Res << "," << Line; | |
| auto *InlinedAt = DL ? DL->getInlinedAt() : nullptr; | |
| if (InlinedAt) { | |
| if (DebugLoc InlinedAtDL = InlinedAt) { | |
| OS << " @["; | |
| printDebugLoc(InlinedAtDL, OS, Ctx); | |
| OS << "]"; | |
| } | |
| } | |
| } | |
| void UserValue::print(raw_ostream &OS, const TargetRegisterInfo *TRI) { | |
| OS << "!\""; | |
| printExtendedName(OS, Variable, dl); | |
| OS << "\"\t"; | |
| for (LocMap::const_iterator I = locInts.begin(); I.valid(); ++I) { | |
| OS << " [" << I.start() << ';' << I.stop() << "):"; | |
| if (I.value().isUndef()) | |
| OS << " undef"; | |
| else { | |
| I.value().printLocNos(OS); | |
| if (I.value().getWasIndirect()) | |
| OS << " ind"; | |
| else if (I.value().getWasList()) | |
| OS << " list"; | |
| } | |
| } | |
| for (unsigned i = 0, e = locations.size(); i != e; ++i) { | |
| OS << " Loc" << i << '='; | |
| locations[i].print(OS, TRI); | |
| } | |
| OS << '\n'; | |
| } | |
| void UserLabel::print(raw_ostream &OS, const TargetRegisterInfo *TRI) { | |
| OS << "!\""; | |
| printExtendedName(OS, Label, dl); | |
| OS << "\"\t"; | |
| OS << loc; | |
| OS << '\n'; | |
| } | |
| void LiveDebugVariables::LDVImpl::print(raw_ostream &OS) { | |
| OS << "********** DEBUG VARIABLES **********\n"; | |
| for (auto &userValue : userValues) | |
| userValue->print(OS, TRI); | |
| OS << "********** DEBUG LABELS **********\n"; | |
| for (auto &userLabel : userLabels) | |
| userLabel->print(OS, TRI); | |
| } | |
| void UserValue::mapVirtRegs(LiveDebugVariables::LDVImpl *LDV) { | |
| for (const MachineOperand &MO : locations) | |
| if (MO.isReg() && MO.getReg().isVirtual()) | |
| LDV->mapVirtReg(MO.getReg(), this); | |
| } | |
| UserValue *LiveDebugVariables::LDVImpl::getUserValue( | |
| const DILocalVariable *Var, | |
| std::optional<DIExpression::FragmentInfo> Fragment, const DebugLoc &DL) { | |
| // FIXME: Handle partially overlapping fragments. See | |
| // https://reviews.llvm.org/D70121#1849741. | |
| DebugVariable ID(Var, Fragment, DL->getInlinedAt()); | |
| UserValue *&UV = userVarMap[ID]; | |
| if (!UV) { | |
| userValues.push_back( | |
| std::make_unique<UserValue>(Var, Fragment, DL, allocator)); | |
| UV = userValues.back().get(); | |
| } | |
| return UV; | |
| } | |
| void LiveDebugVariables::LDVImpl::mapVirtReg(Register VirtReg, UserValue *EC) { | |
| assert(VirtReg.isVirtual() && "Only map VirtRegs"); | |
| UserValue *&Leader = virtRegToEqClass[VirtReg]; | |
| Leader = UserValue::merge(Leader, EC); | |
| } | |
| UserValue *LiveDebugVariables::LDVImpl::lookupVirtReg(Register VirtReg) { | |
| if (UserValue *UV = virtRegToEqClass.lookup(VirtReg)) | |
| return UV->getLeader(); | |
| return nullptr; | |
| } | |
| bool LiveDebugVariables::LDVImpl::handleDebugValue(MachineInstr &MI, | |
| SlotIndex Idx) { | |
| // DBG_VALUE loc, offset, variable, expr | |
| // DBG_VALUE_LIST variable, expr, locs... | |
| if (!MI.isDebugValue()) { | |
| LLVM_DEBUG(dbgs() << "Can't handle non-DBG_VALUE*: " << MI); | |
| return false; | |
| } | |
| if (!MI.getDebugVariableOp().isMetadata()) { | |
| LLVM_DEBUG(dbgs() << "Can't handle DBG_VALUE* with invalid variable: " | |
| << MI); | |
| return false; | |
| } | |
| if (MI.isNonListDebugValue() && | |
| (MI.getNumOperands() != 4 || | |
| !(MI.getDebugOffset().isImm() || MI.getDebugOffset().isReg()))) { | |
| LLVM_DEBUG(dbgs() << "Can't handle malformed DBG_VALUE: " << MI); | |
| return false; | |
| } | |
| // Detect invalid DBG_VALUE instructions, with a debug-use of a virtual | |
| // register that hasn't been defined yet. If we do not remove those here, then | |
| // the re-insertion of the DBG_VALUE instruction after register allocation | |
| // will be incorrect. | |
| bool Discard = false; | |
| for (const MachineOperand &Op : MI.debug_operands()) { | |
| if (Op.isReg() && Op.getReg().isVirtual()) { | |
| const Register Reg = Op.getReg(); | |
| if (!LIS->hasInterval(Reg)) { | |
| // The DBG_VALUE is described by a virtual register that does not have a | |
| // live interval. Discard the DBG_VALUE. | |
| Discard = true; | |
| LLVM_DEBUG(dbgs() << "Discarding debug info (no LIS interval): " << Idx | |
| << " " << MI); | |
| } else { | |
| // The DBG_VALUE is only valid if either Reg is live out from Idx, or | |
| // Reg is defined dead at Idx (where Idx is the slot index for the | |
| // instruction preceding the DBG_VALUE). | |
| const LiveInterval &LI = LIS->getInterval(Reg); | |
| LiveQueryResult LRQ = LI.Query(Idx); | |
| if (!LRQ.valueOutOrDead()) { | |
| // We have found a DBG_VALUE with the value in a virtual register that | |
| // is not live. Discard the DBG_VALUE. | |
| Discard = true; | |
| LLVM_DEBUG(dbgs() << "Discarding debug info (reg not live): " << Idx | |
| << " " << MI); | |
| } | |
| } | |
| } | |
| } | |
| // Get or create the UserValue for (variable,offset) here. | |
| bool IsIndirect = MI.isDebugOffsetImm(); | |
| if (IsIndirect) | |
| assert(MI.getDebugOffset().getImm() == 0 && | |
| "DBG_VALUE with nonzero offset"); | |
| bool IsList = MI.isDebugValueList(); | |
| const DILocalVariable *Var = MI.getDebugVariable(); | |
| const DIExpression *Expr = MI.getDebugExpression(); | |
| UserValue *UV = getUserValue(Var, Expr->getFragmentInfo(), MI.getDebugLoc()); | |
| if (!Discard) | |
| UV->addDef(Idx, | |
| ArrayRef<MachineOperand>(MI.debug_operands().begin(), | |
| MI.debug_operands().end()), | |
| IsIndirect, IsList, *Expr); | |
| else { | |
| MachineOperand MO = MachineOperand::CreateReg(0U, false); | |
| MO.setIsDebug(); | |
| // We should still pass a list the same size as MI.debug_operands() even if | |
| // all MOs are undef, so that DbgVariableValue can correctly adjust the | |
| // expression while removing the duplicated undefs. | |
| SmallVector<MachineOperand, 4> UndefMOs(MI.getNumDebugOperands(), MO); | |
| UV->addDef(Idx, UndefMOs, false, IsList, *Expr); | |
| } | |
| return true; | |
| } | |
| MachineBasicBlock::iterator | |
| LiveDebugVariables::LDVImpl::handleDebugInstr(MachineInstr &MI, SlotIndex Idx) { | |
| assert(MI.isDebugValueLike() || MI.isDebugPHI()); | |
| // In instruction referencing mode, there should be no DBG_VALUE instructions | |
| // that refer to virtual registers. They might still refer to constants. | |
| if (MI.isDebugValueLike()) | |
| assert(none_of(MI.debug_operands(), | |
| [](const MachineOperand &MO) { | |
| return MO.isReg() && MO.getReg().isVirtual(); | |
| }) && | |
| "MIs should not refer to Virtual Registers in InstrRef mode."); | |
| // Unlink the instruction, store it in the debug instructions collection. | |
| auto NextInst = std::next(MI.getIterator()); | |
| auto *MBB = MI.getParent(); | |
| MI.removeFromParent(); | |
| StashedDebugInstrs.push_back({&MI, Idx, MBB}); | |
| return NextInst; | |
| } | |
| bool LiveDebugVariables::LDVImpl::handleDebugLabel(MachineInstr &MI, | |
| SlotIndex Idx) { | |
| // DBG_LABEL label | |
| if (MI.getNumOperands() != 1 || !MI.getOperand(0).isMetadata()) { | |
| LLVM_DEBUG(dbgs() << "Can't handle " << MI); | |
| return false; | |
| } | |
| // Get or create the UserLabel for label here. | |
| const DILabel *Label = MI.getDebugLabel(); | |
| const DebugLoc &DL = MI.getDebugLoc(); | |
| bool Found = false; | |
| for (auto const &L : userLabels) { | |
| if (L->matches(Label, DL->getInlinedAt(), Idx)) { | |
| Found = true; | |
| break; | |
| } | |
| } | |
| if (!Found) | |
| userLabels.push_back(std::make_unique<UserLabel>(Label, DL, Idx)); | |
| return true; | |
| } | |
| bool LiveDebugVariables::LDVImpl::collectDebugValues(MachineFunction &mf, | |
| bool InstrRef) { | |
| bool Changed = false; | |
| for (MachineBasicBlock &MBB : mf) { | |
| for (MachineBasicBlock::iterator MBBI = MBB.begin(), MBBE = MBB.end(); | |
| MBBI != MBBE;) { | |
| // Use the first debug instruction in the sequence to get a SlotIndex | |
| // for following consecutive debug instructions. | |
| if (!MBBI->isDebugOrPseudoInstr()) { | |
| ++MBBI; | |
| continue; | |
| } | |
| // Debug instructions has no slot index. Use the previous | |
| // non-debug instruction's SlotIndex as its SlotIndex. | |
| SlotIndex Idx = | |
| MBBI == MBB.begin() | |
| ? LIS->getMBBStartIdx(&MBB) | |
| : LIS->getInstructionIndex(*std::prev(MBBI)).getRegSlot(); | |
| // Handle consecutive debug instructions with the same slot index. | |
| do { | |
| // In instruction referencing mode, pass each instr to handleDebugInstr | |
| // to be unlinked. Ignore DBG_VALUE_LISTs -- they refer to vregs, and | |
| // need to go through the normal live interval splitting process. | |
| if (InstrRef && (MBBI->isNonListDebugValue() || MBBI->isDebugPHI() || | |
| MBBI->isDebugRef())) { | |
| MBBI = handleDebugInstr(*MBBI, Idx); | |
| Changed = true; | |
| // In normal debug mode, use the dedicated DBG_VALUE / DBG_LABEL handler | |
| // to track things through register allocation, and erase the instr. | |
| } else if ((MBBI->isDebugValue() && handleDebugValue(*MBBI, Idx)) || | |
| (MBBI->isDebugLabel() && handleDebugLabel(*MBBI, Idx))) { | |
| MBBI = MBB.erase(MBBI); | |
| Changed = true; | |
| } else | |
| ++MBBI; | |
| } while (MBBI != MBBE && MBBI->isDebugOrPseudoInstr()); | |
| } | |
| } | |
| return Changed; | |
| } | |
| void UserValue::extendDef( | |
| SlotIndex Idx, DbgVariableValue DbgValue, | |
| SmallDenseMap<unsigned, std::pair<LiveRange *, const VNInfo *>> | |
| &LiveIntervalInfo, | |
| std::optional<std::pair<SlotIndex, SmallVector<unsigned>>> &Kills, | |
| LiveIntervals &LIS) { | |
| SlotIndex Start = Idx; | |
| MachineBasicBlock *MBB = LIS.getMBBFromIndex(Start); | |
| SlotIndex Stop = LIS.getMBBEndIdx(MBB); | |
| LocMap::iterator I = locInts.find(Start); | |
| // Limit to the intersection of the VNIs' live ranges. | |
| for (auto &LII : LiveIntervalInfo) { | |
| LiveRange *LR = LII.second.first; | |
| assert(LR && LII.second.second && "Missing range info for Idx."); | |
| LiveInterval::Segment *Segment = LR->getSegmentContaining(Start); | |
| assert(Segment && Segment->valno == LII.second.second && | |
| "Invalid VNInfo for Idx given?"); | |
| if (Segment->end < Stop) { | |
| Stop = Segment->end; | |
| Kills = {Stop, {LII.first}}; | |
| } else if (Segment->end == Stop && Kills) { | |
| // If multiple locations end at the same place, track all of them in | |
| // Kills. | |
| Kills->second.push_back(LII.first); | |
| } | |
| } | |
| // There could already be a short def at Start. | |
| if (I.valid() && I.start() <= Start) { | |
| // Stop when meeting a different location or an already extended interval. | |
| Start = Start.getNextSlot(); | |
| if (I.value() != DbgValue || I.stop() != Start) { | |
| // Clear `Kills`, as we have a new def available. | |
| Kills = std::nullopt; | |
| return; | |
| } | |
| // This is a one-slot placeholder. Just skip it. | |
| ++I; | |
| } | |
| // Limited by the next def. | |
| if (I.valid() && I.start() < Stop) { | |
| Stop = I.start(); | |
| // Clear `Kills`, as we have a new def available. | |
| Kills = std::nullopt; | |
| } | |
| if (Start < Stop) { | |
| DbgVariableValue ExtDbgValue(DbgValue); | |
| I.insert(Start, Stop, std::move(ExtDbgValue)); | |
| } | |
| } | |
| void UserValue::addDefsFromCopies( | |
| DbgVariableValue DbgValue, | |
| SmallVectorImpl<std::pair<unsigned, LiveInterval *>> &LocIntervals, | |
| SlotIndex KilledAt, | |
| SmallVectorImpl<std::pair<SlotIndex, DbgVariableValue>> &NewDefs, | |
| MachineRegisterInfo &MRI, LiveIntervals &LIS) { | |
| // Don't track copies from physregs, there are too many uses. | |
| if (any_of(LocIntervals, | |
| [](auto LocI) { return !LocI.second->reg().isVirtual(); })) | |
| return; | |
| // Collect all the (vreg, valno) pairs that are copies of LI. | |
| SmallDenseMap<unsigned, | |
| SmallVector<std::pair<LiveInterval *, const VNInfo *>, 4>> | |
| CopyValues; | |
| for (auto &LocInterval : LocIntervals) { | |
| unsigned LocNo = LocInterval.first; | |
| LiveInterval *LI = LocInterval.second; | |
| for (MachineOperand &MO : MRI.use_nodbg_operands(LI->reg())) { | |
| MachineInstr *MI = MO.getParent(); | |
| // Copies of the full value. | |
| if (MO.getSubReg() || !MI->isCopy()) | |
| continue; | |
| Register DstReg = MI->getOperand(0).getReg(); | |
| // Don't follow copies to physregs. These are usually setting up call | |
| // arguments, and the argument registers are always call clobbered. We are | |
| // better off in the source register which could be a callee-saved | |
| // register, or it could be spilled. | |
| if (!DstReg.isVirtual()) | |
| continue; | |
| // Is the value extended to reach this copy? If not, another def may be | |
| // blocking it, or we are looking at a wrong value of LI. | |
| SlotIndex Idx = LIS.getInstructionIndex(*MI); | |
| LocMap::iterator I = locInts.find(Idx.getRegSlot(true)); | |
| if (!I.valid() || I.value() != DbgValue) | |
| continue; | |
| if (!LIS.hasInterval(DstReg)) | |
| continue; | |
| LiveInterval *DstLI = &LIS.getInterval(DstReg); | |
| const VNInfo *DstVNI = DstLI->getVNInfoAt(Idx.getRegSlot()); | |
| assert(DstVNI && DstVNI->def == Idx.getRegSlot() && "Bad copy value"); | |
| CopyValues[LocNo].push_back(std::make_pair(DstLI, DstVNI)); | |
| } | |
| } | |
| if (CopyValues.empty()) | |
| return; | |
| #if !defined(NDEBUG) | |
| for (auto &LocInterval : LocIntervals) | |
| LLVM_DEBUG(dbgs() << "Got " << CopyValues[LocInterval.first].size() | |
| << " copies of " << *LocInterval.second << '\n'); | |
| #endif | |
| // Try to add defs of the copied values for the kill point. Check that there | |
| // isn't already a def at Idx. | |
| LocMap::iterator I = locInts.find(KilledAt); | |
| if (I.valid() && I.start() <= KilledAt) | |
| return; | |
| DbgVariableValue NewValue(DbgValue); | |
| for (auto &LocInterval : LocIntervals) { | |
| unsigned LocNo = LocInterval.first; | |
| bool FoundCopy = false; | |
| for (auto &LIAndVNI : CopyValues[LocNo]) { | |
| LiveInterval *DstLI = LIAndVNI.first; | |
| const VNInfo *DstVNI = LIAndVNI.second; | |
| if (DstLI->getVNInfoAt(KilledAt) != DstVNI) | |
| continue; | |
| LLVM_DEBUG(dbgs() << "Kill at " << KilledAt << " covered by valno #" | |
| << DstVNI->id << " in " << *DstLI << '\n'); | |
| MachineInstr *CopyMI = LIS.getInstructionFromIndex(DstVNI->def); | |
| assert(CopyMI && CopyMI->isCopy() && "Bad copy value"); | |
| unsigned NewLocNo = getLocationNo(CopyMI->getOperand(0)); | |
| NewValue = NewValue.changeLocNo(LocNo, NewLocNo); | |
| FoundCopy = true; | |
| break; | |
| } | |
| // If there are any killed locations we can't find a copy for, we can't | |
| // extend the variable value. | |
| if (!FoundCopy) | |
| return; | |
| } | |
| I.insert(KilledAt, KilledAt.getNextSlot(), NewValue); | |
| NewDefs.push_back(std::make_pair(KilledAt, NewValue)); | |
| } | |
| void UserValue::computeIntervals(MachineRegisterInfo &MRI, | |
| const TargetRegisterInfo &TRI, | |
| LiveIntervals &LIS, LexicalScopes &LS) { | |
| SmallVector<std::pair<SlotIndex, DbgVariableValue>, 16> Defs; | |
| // Collect all defs to be extended (Skipping undefs). | |
| for (LocMap::const_iterator I = locInts.begin(); I.valid(); ++I) | |
| if (!I.value().isUndef()) | |
| Defs.push_back(std::make_pair(I.start(), I.value())); | |
| // Extend all defs, and possibly add new ones along the way. | |
| for (unsigned i = 0; i != Defs.size(); ++i) { | |
| SlotIndex Idx = Defs[i].first; | |
| DbgVariableValue DbgValue = Defs[i].second; | |
| SmallDenseMap<unsigned, std::pair<LiveRange *, const VNInfo *>> LIs; | |
| bool ShouldExtendDef = false; | |
| for (unsigned LocNo : DbgValue.loc_nos()) { | |
| const MachineOperand &LocMO = locations[LocNo]; | |
| if (!LocMO.isReg() || !LocMO.getReg().isVirtual()) { | |
| ShouldExtendDef |= !LocMO.isReg(); | |
| continue; | |
| } | |
| ShouldExtendDef = true; | |
| LiveInterval *LI = nullptr; | |
| const VNInfo *VNI = nullptr; | |
| if (LIS.hasInterval(LocMO.getReg())) { | |
| LI = &LIS.getInterval(LocMO.getReg()); | |
| VNI = LI->getVNInfoAt(Idx); | |
| } | |
| if (LI && VNI) | |
| LIs[LocNo] = {LI, VNI}; | |
| } | |
| if (ShouldExtendDef) { | |
| std::optional<std::pair<SlotIndex, SmallVector<unsigned>>> Kills; | |
| extendDef(Idx, DbgValue, LIs, Kills, LIS); | |
| if (Kills) { | |
| SmallVector<std::pair<unsigned, LiveInterval *>, 2> KilledLocIntervals; | |
| bool AnySubreg = false; | |
| for (unsigned LocNo : Kills->second) { | |
| const MachineOperand &LocMO = this->locations[LocNo]; | |
| if (LocMO.getSubReg()) { | |
| AnySubreg = true; | |
| break; | |
| } | |
| LiveInterval *LI = &LIS.getInterval(LocMO.getReg()); | |
| KilledLocIntervals.push_back({LocNo, LI}); | |
| } | |
| // FIXME: Handle sub-registers in addDefsFromCopies. The problem is that | |
| // if the original location for example is %vreg0:sub_hi, and we find a | |
| // full register copy in addDefsFromCopies (at the moment it only | |
| // handles full register copies), then we must add the sub1 sub-register | |
| // index to the new location. However, that is only possible if the new | |
| // virtual register is of the same regclass (or if there is an | |
| // equivalent sub-register in that regclass). For now, simply skip | |
| // handling copies if a sub-register is involved. | |
| if (!AnySubreg) | |
| addDefsFromCopies(DbgValue, KilledLocIntervals, Kills->first, Defs, | |
| MRI, LIS); | |
| } | |
| } | |
| // For physregs, we only mark the start slot idx. DwarfDebug will see it | |
| // as if the DBG_VALUE is valid up until the end of the basic block, or | |
| // the next def of the physical register. So we do not need to extend the | |
| // range. It might actually happen that the DBG_VALUE is the last use of | |
| // the physical register (e.g. if this is an unused input argument to a | |
| // function). | |
| } | |
| // The computed intervals may extend beyond the range of the debug | |
| // location's lexical scope. In this case, splitting of an interval | |
| // can result in an interval outside of the scope being created, | |
| // causing extra unnecessary DBG_VALUEs to be emitted. To prevent | |
| // this, trim the intervals to the lexical scope in the case of inlined | |
| // variables, since heavy inlining may cause production of dramatically big | |
| // number of DBG_VALUEs to be generated. | |
| if (!dl.getInlinedAt()) | |
| return; | |
| LexicalScope *Scope = LS.findLexicalScope(dl); | |
| if (!Scope) | |
| return; | |
| SlotIndex PrevEnd; | |
| LocMap::iterator I = locInts.begin(); | |
| // Iterate over the lexical scope ranges. Each time round the loop | |
| // we check the intervals for overlap with the end of the previous | |
| // range and the start of the next. The first range is handled as | |
| // a special case where there is no PrevEnd. | |
| for (const InsnRange &Range : Scope->getRanges()) { | |
| SlotIndex RStart = LIS.getInstructionIndex(*Range.first); | |
| SlotIndex REnd = LIS.getInstructionIndex(*Range.second); | |
| // Variable locations at the first instruction of a block should be | |
| // based on the block's SlotIndex, not the first instruction's index. | |
| if (Range.first == Range.first->getParent()->begin()) | |
| RStart = LIS.getSlotIndexes()->getIndexBefore(*Range.first); | |
| // At the start of each iteration I has been advanced so that | |
| // I.stop() >= PrevEnd. Check for overlap. | |
| if (PrevEnd && I.start() < PrevEnd) { | |
| SlotIndex IStop = I.stop(); | |
| DbgVariableValue DbgValue = I.value(); | |
| // Stop overlaps previous end - trim the end of the interval to | |
| // the scope range. | |
| I.setStopUnchecked(PrevEnd); | |
| ++I; | |
| // If the interval also overlaps the start of the "next" (i.e. | |
| // current) range create a new interval for the remainder (which | |
| // may be further trimmed). | |
| if (RStart < IStop) | |
| I.insert(RStart, IStop, DbgValue); | |
| } | |
| // Advance I so that I.stop() >= RStart, and check for overlap. | |
| I.advanceTo(RStart); | |
| if (!I.valid()) | |
| return; | |
| if (I.start() < RStart) { | |
| // Interval start overlaps range - trim to the scope range. | |
| I.setStartUnchecked(RStart); | |
| // Remember that this interval was trimmed. | |
| trimmedDefs.insert(RStart); | |
| } | |
| // The end of a lexical scope range is the last instruction in the | |
| // range. To convert to an interval we need the index of the | |
| // instruction after it. | |
| REnd = REnd.getNextIndex(); | |
| // Advance I to first interval outside current range. | |
| I.advanceTo(REnd); | |
| if (!I.valid()) | |
| return; | |
| PrevEnd = REnd; | |
| } | |
| // Check for overlap with end of final range. | |
| if (PrevEnd && I.start() < PrevEnd) | |
| I.setStopUnchecked(PrevEnd); | |
| } | |
| void LiveDebugVariables::LDVImpl::computeIntervals() { | |
| LexicalScopes LS; | |
| LS.scanFunction(*MF); | |
| for (const auto &UV : userValues) { | |
| UV->computeIntervals(MF->getRegInfo(), *TRI, *LIS, LS); | |
| UV->mapVirtRegs(this); | |
| } | |
| } | |
| bool LiveDebugVariables::LDVImpl::runOnMachineFunction(MachineFunction &mf, | |
| bool InstrRef) { | |
| clear(); | |
| MF = &mf; | |
| TRI = mf.getSubtarget().getRegisterInfo(); | |
| LLVM_DEBUG(dbgs() << "********** COMPUTING LIVE DEBUG VARIABLES: " | |
| << mf.getName() << " **********\n"); | |
| bool Changed = collectDebugValues(mf, InstrRef); | |
| computeIntervals(); | |
| LLVM_DEBUG(print(dbgs())); | |
| // Collect the set of VReg / SlotIndexs where PHIs occur; index the sensitive | |
| // VRegs too, for when we're notified of a range split. | |
| SlotIndexes *Slots = LIS->getSlotIndexes(); | |
| for (const auto &PHIIt : MF->DebugPHIPositions) { | |
| const MachineFunction::DebugPHIRegallocPos &Position = PHIIt.second; | |
| MachineBasicBlock *MBB = Position.MBB; | |
| Register Reg = Position.Reg; | |
| unsigned SubReg = Position.SubReg; | |
| SlotIndex SI = Slots->getMBBStartIdx(MBB); | |
| PHIValPos VP = {SI, Reg, SubReg}; | |
| PHIValToPos.insert(std::make_pair(PHIIt.first, VP)); | |
| RegToPHIIdx[Reg].push_back(PHIIt.first); | |
| } | |
| ModifiedMF = Changed; | |
| return Changed; | |
| } | |
| static void removeDebugInstrs(MachineFunction &mf) { | |
| for (MachineBasicBlock &MBB : mf) { | |
| for (MachineInstr &MI : llvm::make_early_inc_range(MBB)) | |
| if (MI.isDebugInstr()) | |
| MBB.erase(&MI); | |
| } | |
| } | |
| bool LiveDebugVariablesWrapperLegacy::runOnMachineFunction( | |
| MachineFunction &mf) { | |
| auto *LIS = &getAnalysis<LiveIntervalsWrapperPass>().getLIS(); | |
| Impl = std::make_unique<LiveDebugVariables>(); | |
| Impl->analyze(mf, LIS); | |
| return false; | |
| } | |
| AnalysisKey LiveDebugVariablesAnalysis::Key; | |
| LiveDebugVariables | |
| LiveDebugVariablesAnalysis::run(MachineFunction &MF, | |
| MachineFunctionAnalysisManager &MFAM) { | |
| MFPropsModifier _(*this, MF); | |
| auto *LIS = &MFAM.getResult<LiveIntervalsAnalysis>(MF); | |
| LiveDebugVariables LDV; | |
| LDV.analyze(MF, LIS); | |
| return LDV; | |
| } | |
| PreservedAnalyses | |
| LiveDebugVariablesPrinterPass::run(MachineFunction &MF, | |
| MachineFunctionAnalysisManager &MFAM) { | |
| auto &LDV = MFAM.getResult<LiveDebugVariablesAnalysis>(MF); | |
| LDV.print(OS); | |
| return PreservedAnalyses::all(); | |
| } | |
| void LiveDebugVariables::releaseMemory() { | |
| if (PImpl) | |
| PImpl->clear(); | |
| } | |
| bool LiveDebugVariables::invalidate( | |
| MachineFunction &, const PreservedAnalyses &PA, | |
| MachineFunctionAnalysisManager::Invalidator &) { | |
| auto PAC = PA.getChecker<LiveDebugVariablesAnalysis>(); | |
| // Some architectures split the register allocation into multiple phases based | |
| // on register classes. This requires preserving analyses between the phases | |
| // by default. | |
| return !PAC.preservedWhenStateless(); | |
| } | |
| void LiveDebugVariables::analyze(MachineFunction &MF, LiveIntervals *LIS) { | |
| if (!EnableLDV) | |
| return; | |
| if (!MF.getFunction().getSubprogram()) { | |
| removeDebugInstrs(MF); | |
| return; | |
| } | |
| PImpl.reset(new LDVImpl(LIS)); | |
| // Have we been asked to track variable locations using instruction | |
| // referencing? | |
| bool InstrRef = MF.useDebugInstrRef(); | |
| PImpl->runOnMachineFunction(MF, InstrRef); | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // Live Range Splitting | |
| //===----------------------------------------------------------------------===// | |
| bool | |
| UserValue::splitLocation(unsigned OldLocNo, ArrayRef<Register> NewRegs, | |
| LiveIntervals& LIS) { | |
| LLVM_DEBUG({ | |
| dbgs() << "Splitting Loc" << OldLocNo << '\t'; | |
| print(dbgs(), nullptr); | |
| }); | |
| bool DidChange = false; | |
| LocMap::iterator LocMapI; | |
| LocMapI.setMap(locInts); | |
| for (Register NewReg : NewRegs) { | |
| LiveInterval *LI = &LIS.getInterval(NewReg); | |
| if (LI->empty()) | |
| continue; | |
| // Don't allocate the new LocNo until it is needed. | |
| unsigned NewLocNo = UndefLocNo; | |
| // Iterate over the overlaps between locInts and LI. | |
| LocMapI.find(LI->beginIndex()); | |
| if (!LocMapI.valid()) | |
| continue; | |
| LiveInterval::iterator LII = LI->advanceTo(LI->begin(), LocMapI.start()); | |
| LiveInterval::iterator LIE = LI->end(); | |
| while (LocMapI.valid() && LII != LIE) { | |
| // At this point, we know that LocMapI.stop() > LII->start. | |
| LII = LI->advanceTo(LII, LocMapI.start()); | |
| if (LII == LIE) | |
| break; | |
| // Now LII->end > LocMapI.start(). Do we have an overlap? | |
| if (LocMapI.value().containsLocNo(OldLocNo) && | |
| LII->start < LocMapI.stop()) { | |
| // Overlapping correct location. Allocate NewLocNo now. | |
| if (NewLocNo == UndefLocNo) { | |
| MachineOperand MO = MachineOperand::CreateReg(LI->reg(), false); | |
| MO.setSubReg(locations[OldLocNo].getSubReg()); | |
| NewLocNo = getLocationNo(MO); | |
| DidChange = true; | |
| } | |
| SlotIndex LStart = LocMapI.start(); | |
| SlotIndex LStop = LocMapI.stop(); | |
| DbgVariableValue OldDbgValue = LocMapI.value(); | |
| // Trim LocMapI down to the LII overlap. | |
| if (LStart < LII->start) | |
| LocMapI.setStartUnchecked(LII->start); | |
| if (LStop > LII->end) | |
| LocMapI.setStopUnchecked(LII->end); | |
| // Change the value in the overlap. This may trigger coalescing. | |
| LocMapI.setValue(OldDbgValue.changeLocNo(OldLocNo, NewLocNo)); | |
| // Re-insert any removed OldDbgValue ranges. | |
| if (LStart < LocMapI.start()) { | |
| LocMapI.insert(LStart, LocMapI.start(), OldDbgValue); | |
| ++LocMapI; | |
| assert(LocMapI.valid() && "Unexpected coalescing"); | |
| } | |
| if (LStop > LocMapI.stop()) { | |
| ++LocMapI; | |
| LocMapI.insert(LII->end, LStop, OldDbgValue); | |
| --LocMapI; | |
| } | |
| } | |
| // Advance to the next overlap. | |
| if (LII->end < LocMapI.stop()) { | |
| if (++LII == LIE) | |
| break; | |
| LocMapI.advanceTo(LII->start); | |
| } else { | |
| ++LocMapI; | |
| if (!LocMapI.valid()) | |
| break; | |
| LII = LI->advanceTo(LII, LocMapI.start()); | |
| } | |
| } | |
| } | |
| // Finally, remove OldLocNo unless it is still used by some interval in the | |
| // locInts map. One case when OldLocNo still is in use is when the register | |
| // has been spilled. In such situations the spilled register is kept as a | |
| // location until rewriteLocations is called (VirtRegMap is mapping the old | |
| // register to the spill slot). So for a while we can have locations that map | |
| // to virtual registers that have been removed from both the MachineFunction | |
| // and from LiveIntervals. | |
| // | |
| // We may also just be using the location for a value with a different | |
| // expression. | |
| removeLocationIfUnused(OldLocNo); | |
| LLVM_DEBUG({ | |
| dbgs() << "Split result: \t"; | |
| print(dbgs(), nullptr); | |
| }); | |
| return DidChange; | |
| } | |
| bool | |
| UserValue::splitRegister(Register OldReg, ArrayRef<Register> NewRegs, | |
| LiveIntervals &LIS) { | |
| bool DidChange = false; | |
| // Split locations referring to OldReg. Iterate backwards so splitLocation can | |
| // safely erase unused locations. | |
| for (unsigned i = locations.size(); i ; --i) { | |
| unsigned LocNo = i-1; | |
| const MachineOperand *Loc = &locations[LocNo]; | |
| if (!Loc->isReg() || Loc->getReg() != OldReg) | |
| continue; | |
| DidChange |= splitLocation(LocNo, NewRegs, LIS); | |
| } | |
| return DidChange; | |
| } | |
| void LiveDebugVariables::LDVImpl::splitPHIRegister(Register OldReg, | |
| ArrayRef<Register> NewRegs) { | |
| auto RegIt = RegToPHIIdx.find(OldReg); | |
| if (RegIt == RegToPHIIdx.end()) | |
| return; | |
| std::vector<std::pair<Register, unsigned>> NewRegIdxes; | |
| // Iterate over all the debug instruction numbers affected by this split. | |
| for (unsigned InstrID : RegIt->second) { | |
| auto PHIIt = PHIValToPos.find(InstrID); | |
| assert(PHIIt != PHIValToPos.end()); | |
| const SlotIndex &Slot = PHIIt->second.SI; | |
| assert(OldReg == PHIIt->second.Reg); | |
| // Find the new register that covers this position. | |
| for (auto NewReg : NewRegs) { | |
| const LiveInterval &LI = LIS->getInterval(NewReg); | |
| auto LII = LI.find(Slot); | |
| if (LII != LI.end() && LII->start <= Slot) { | |
| // This new register covers this PHI position, record this for indexing. | |
| NewRegIdxes.push_back(std::make_pair(NewReg, InstrID)); | |
| // Record that this value lives in a different VReg now. | |
| PHIIt->second.Reg = NewReg; | |
| break; | |
| } | |
| } | |
| // If we do not find a new register covering this PHI, then register | |
| // allocation has dropped its location, for example because it's not live. | |
| // The old VReg will not be mapped to a physreg, and the instruction | |
| // number will have been optimized out. | |
| } | |
| // Re-create register index using the new register numbers. | |
| RegToPHIIdx.erase(RegIt); | |
| for (auto &RegAndInstr : NewRegIdxes) | |
| RegToPHIIdx[RegAndInstr.first].push_back(RegAndInstr.second); | |
| } | |
| void LiveDebugVariables::LDVImpl::splitRegister(Register OldReg, | |
| ArrayRef<Register> NewRegs) { | |
| // Consider whether this split range affects any PHI locations. | |
| splitPHIRegister(OldReg, NewRegs); | |
| // Check whether any intervals mapped by a DBG_VALUE were split and need | |
| // updating. | |
| bool DidChange = false; | |
| for (UserValue *UV = lookupVirtReg(OldReg); UV; UV = UV->getNext()) | |
| DidChange |= UV->splitRegister(OldReg, NewRegs, *LIS); | |
| if (!DidChange) | |
| return; | |
| // Map all of the new virtual registers. | |
| UserValue *UV = lookupVirtReg(OldReg); | |
| for (Register NewReg : NewRegs) | |
| mapVirtReg(NewReg, UV); | |
| } | |
| void LiveDebugVariables:: | |
| splitRegister(Register OldReg, ArrayRef<Register> NewRegs, LiveIntervals &LIS) { | |
| if (PImpl) | |
| PImpl->splitRegister(OldReg, NewRegs); | |
| } | |
| void UserValue::rewriteLocations(VirtRegMap &VRM, const MachineFunction &MF, | |
| const TargetInstrInfo &TII, | |
| const TargetRegisterInfo &TRI, | |
| SpillOffsetMap &SpillOffsets) { | |
| // Build a set of new locations with new numbers so we can coalesce our | |
| // IntervalMap if two vreg intervals collapse to the same physical location. | |
| // Use MapVector instead of SetVector because MapVector::insert returns the | |
| // position of the previously or newly inserted element. The boolean value | |
| // tracks if the location was produced by a spill. | |
| // FIXME: This will be problematic if we ever support direct and indirect | |
| // frame index locations, i.e. expressing both variables in memory and | |
| // 'int x, *px = &x'. The "spilled" bit must become part of the location. | |
| MapVector<MachineOperand, std::pair<bool, unsigned>> NewLocations; | |
| SmallVector<unsigned, 4> LocNoMap(locations.size()); | |
| for (unsigned I = 0, E = locations.size(); I != E; ++I) { | |
| bool Spilled = false; | |
| unsigned SpillOffset = 0; | |
| MachineOperand Loc = locations[I]; | |
| // Only virtual registers are rewritten. | |
| if (Loc.isReg() && Loc.getReg() && Loc.getReg().isVirtual()) { | |
| Register VirtReg = Loc.getReg(); | |
| if (VRM.isAssignedReg(VirtReg) && VRM.hasPhys(VirtReg)) { | |
| // This can create a %noreg operand in rare cases when the sub-register | |
| // index is no longer available. That means the user value is in a | |
| // non-existent sub-register, and %noreg is exactly what we want. | |
| Loc.substPhysReg(VRM.getPhys(VirtReg), TRI); | |
| } else if (VRM.getStackSlot(VirtReg) != VirtRegMap::NO_STACK_SLOT) { | |
| // Retrieve the stack slot offset. | |
| unsigned SpillSize; | |
| const MachineRegisterInfo &MRI = MF.getRegInfo(); | |
| const TargetRegisterClass *TRC = MRI.getRegClass(VirtReg); | |
| bool Success = TII.getStackSlotRange(TRC, Loc.getSubReg(), SpillSize, | |
| SpillOffset, MF); | |
| // FIXME: Invalidate the location if the offset couldn't be calculated. | |
| (void)Success; | |
| Loc = MachineOperand::CreateFI(VRM.getStackSlot(VirtReg)); | |
| Spilled = true; | |
| } else { | |
| Loc.setReg(0); | |
| Loc.setSubReg(0); | |
| } | |
| } | |
| // Insert this location if it doesn't already exist and record a mapping | |
| // from the old number to the new number. | |
| auto InsertResult = NewLocations.insert({Loc, {Spilled, SpillOffset}}); | |
| unsigned NewLocNo = std::distance(NewLocations.begin(), InsertResult.first); | |
| LocNoMap[I] = NewLocNo; | |
| } | |
| // Rewrite the locations and record the stack slot offsets for spills. | |
| locations.clear(); | |
| SpillOffsets.clear(); | |
| for (auto &Pair : NewLocations) { | |
| bool Spilled; | |
| unsigned SpillOffset; | |
| std::tie(Spilled, SpillOffset) = Pair.second; | |
| locations.push_back(Pair.first); | |
| if (Spilled) { | |
| unsigned NewLocNo = std::distance(&*NewLocations.begin(), &Pair); | |
| SpillOffsets[NewLocNo] = SpillOffset; | |
| } | |
| } | |
| // Update the interval map, but only coalesce left, since intervals to the | |
| // right use the old location numbers. This should merge two contiguous | |
| // DBG_VALUE intervals with different vregs that were allocated to the same | |
| // physical register. | |
| for (LocMap::iterator I = locInts.begin(); I.valid(); ++I) { | |
| I.setValueUnchecked(I.value().remapLocNos(LocNoMap)); | |
| I.setStart(I.start()); | |
| } | |
| } | |
| /// Find an iterator for inserting a DBG_VALUE instruction. | |
| static MachineBasicBlock::iterator | |
| findInsertLocation(MachineBasicBlock *MBB, SlotIndex Idx, LiveIntervals &LIS, | |
| BlockSkipInstsMap &BBSkipInstsMap) { | |
| SlotIndex Start = LIS.getMBBStartIdx(MBB); | |
| Idx = Idx.getBaseIndex(); | |
| // Try to find an insert location by going backwards from Idx. | |
| MachineInstr *MI; | |
| while (!(MI = LIS.getInstructionFromIndex(Idx))) { | |
| // We've reached the beginning of MBB. | |
| if (Idx == Start) { | |
| // Retrieve the last PHI/Label/Debug location found when calling | |
| // SkipPHIsLabelsAndDebug last time. Start searching from there. | |
| // | |
| // Note the iterator kept in BBSkipInstsMap is one step back based | |
| // on the iterator returned by SkipPHIsLabelsAndDebug last time. | |
| // One exception is when SkipPHIsLabelsAndDebug returns MBB->begin(), | |
| // BBSkipInstsMap won't save it. This is to consider the case that | |
| // new instructions may be inserted at the beginning of MBB after | |
| // last call of SkipPHIsLabelsAndDebug. If we save MBB->begin() in | |
| // BBSkipInstsMap, after new non-phi/non-label/non-debug instructions | |
| // are inserted at the beginning of the MBB, the iterator in | |
| // BBSkipInstsMap won't point to the beginning of the MBB anymore. | |
| // Therefore The next search in SkipPHIsLabelsAndDebug will skip those | |
| // newly added instructions and that is unwanted. | |
| MachineBasicBlock::iterator BeginIt; | |
| auto MapIt = BBSkipInstsMap.find(MBB); | |
| if (MapIt == BBSkipInstsMap.end()) | |
| BeginIt = MBB->begin(); | |
| else | |
| BeginIt = std::next(MapIt->second); | |
| auto I = MBB->SkipPHIsLabelsAndDebug(BeginIt); | |
| if (I != BeginIt) | |
| BBSkipInstsMap[MBB] = std::prev(I); | |
| return I; | |
| } | |
| Idx = Idx.getPrevIndex(); | |
| } | |
| // Don't insert anything after the first terminator, though. | |
| auto It = MI->isTerminator() ? MBB->getFirstTerminator() | |
| : std::next(MachineBasicBlock::iterator(MI)); | |
| return skipDebugInstructionsForward(It, MBB->end()); | |
| } | |
| /// Find an iterator for inserting the next DBG_VALUE instruction | |
| /// (or end if no more insert locations found). | |
| static MachineBasicBlock::iterator | |
| findNextInsertLocation(MachineBasicBlock *MBB, MachineBasicBlock::iterator I, | |
| SlotIndex StopIdx, ArrayRef<MachineOperand> LocMOs, | |
| LiveIntervals &LIS, const TargetRegisterInfo &TRI) { | |
| SmallVector<Register, 4> Regs; | |
| for (const MachineOperand &LocMO : LocMOs) | |
| if (LocMO.isReg()) | |
| Regs.push_back(LocMO.getReg()); | |
| if (Regs.empty()) | |
| return MBB->instr_end(); | |
| // Find the next instruction in the MBB that define the register Reg. | |
| while (I != MBB->end() && !I->isTerminator()) { | |
| if (!LIS.isNotInMIMap(*I) && | |
| SlotIndex::isEarlierEqualInstr(StopIdx, LIS.getInstructionIndex(*I))) | |
| break; | |
| if (any_of(Regs, [&I, &TRI](Register &Reg) { | |
| return I->definesRegister(Reg, &TRI); | |
| })) | |
| // The insert location is directly after the instruction/bundle. | |
| return std::next(I); | |
| ++I; | |
| } | |
| return MBB->end(); | |
| } | |
| void UserValue::insertDebugValue(MachineBasicBlock *MBB, SlotIndex StartIdx, | |
| SlotIndex StopIdx, DbgVariableValue DbgValue, | |
| ArrayRef<bool> LocSpills, | |
| ArrayRef<unsigned> SpillOffsets, | |
| LiveIntervals &LIS, const TargetInstrInfo &TII, | |
| const TargetRegisterInfo &TRI, | |
| BlockSkipInstsMap &BBSkipInstsMap) { | |
| SlotIndex MBBEndIdx = LIS.getMBBEndIdx(&*MBB); | |
| // Only search within the current MBB. | |
| StopIdx = (MBBEndIdx < StopIdx) ? MBBEndIdx : StopIdx; | |
| MachineBasicBlock::iterator I = | |
| findInsertLocation(MBB, StartIdx, LIS, BBSkipInstsMap); | |
| // Undef values don't exist in locations so create new "noreg" register MOs | |
| // for them. See getLocationNo(). | |
| SmallVector<MachineOperand, 8> MOs; | |
| if (DbgValue.isUndef()) { | |
| MOs.assign(DbgValue.loc_nos().size(), | |
| MachineOperand::CreateReg( | |
| /* Reg */ 0, /* isDef */ false, /* isImp */ false, | |
| /* isKill */ false, /* isDead */ false, | |
| /* isUndef */ false, /* isEarlyClobber */ false, | |
| /* SubReg */ 0, /* isDebug */ true)); | |
| } else { | |
| for (unsigned LocNo : DbgValue.loc_nos()) | |
| MOs.push_back(locations[LocNo]); | |
| } | |
| ++NumInsertedDebugValues; | |
| assert(cast<DILocalVariable>(Variable) | |
| ->isValidLocationForIntrinsic(getDebugLoc()) && | |
| "Expected inlined-at fields to agree"); | |
| // If the location was spilled, the new DBG_VALUE will be indirect. If the | |
| // original DBG_VALUE was indirect, we need to add DW_OP_deref to indicate | |
| // that the original virtual register was a pointer. Also, add the stack slot | |
| // offset for the spilled register to the expression. | |
| const DIExpression *Expr = DbgValue.getExpression(); | |
| bool IsIndirect = DbgValue.getWasIndirect(); | |
| bool IsList = DbgValue.getWasList(); | |
| for (unsigned I = 0, E = LocSpills.size(); I != E; ++I) { | |
| if (LocSpills[I]) { | |
| if (!IsList) { | |
| uint8_t DIExprFlags = DIExpression::ApplyOffset; | |
| if (IsIndirect) | |
| DIExprFlags |= DIExpression::DerefAfter; | |
| Expr = DIExpression::prepend(Expr, DIExprFlags, SpillOffsets[I]); | |
| IsIndirect = true; | |
| } else { | |
| SmallVector<uint64_t, 4> Ops; | |
| DIExpression::appendOffset(Ops, SpillOffsets[I]); | |
| Ops.push_back(dwarf::DW_OP_deref); | |
| Expr = DIExpression::appendOpsToArg(Expr, Ops, I); | |
| } | |
| } | |
| assert((!LocSpills[I] || MOs[I].isFI()) && | |
| "a spilled location must be a frame index"); | |
| } | |
| unsigned DbgValueOpcode = | |
| IsList ? TargetOpcode::DBG_VALUE_LIST : TargetOpcode::DBG_VALUE; | |
| do { | |
| BuildMI(*MBB, I, getDebugLoc(), TII.get(DbgValueOpcode), IsIndirect, MOs, | |
| Variable, Expr); | |
| // Continue and insert DBG_VALUES after every redefinition of a register | |
| // associated with the debug value within the range | |
| I = findNextInsertLocation(MBB, I, StopIdx, MOs, LIS, TRI); | |
| } while (I != MBB->end()); | |
| } | |
| void UserLabel::insertDebugLabel(MachineBasicBlock *MBB, SlotIndex Idx, | |
| LiveIntervals &LIS, const TargetInstrInfo &TII, | |
| BlockSkipInstsMap &BBSkipInstsMap) { | |
| MachineBasicBlock::iterator I = | |
| findInsertLocation(MBB, Idx, LIS, BBSkipInstsMap); | |
| ++NumInsertedDebugLabels; | |
| BuildMI(*MBB, I, getDebugLoc(), TII.get(TargetOpcode::DBG_LABEL)) | |
| .addMetadata(Label); | |
| } | |
| void UserValue::emitDebugValues(VirtRegMap *VRM, LiveIntervals &LIS, | |
| const TargetInstrInfo &TII, | |
| const TargetRegisterInfo &TRI, | |
| const SpillOffsetMap &SpillOffsets, | |
| BlockSkipInstsMap &BBSkipInstsMap) { | |
| MachineFunction::iterator MFEnd = VRM->getMachineFunction().end(); | |
| for (LocMap::const_iterator I = locInts.begin(); I.valid();) { | |
| SlotIndex Start = I.start(); | |
| SlotIndex Stop = I.stop(); | |
| DbgVariableValue DbgValue = I.value(); | |
| SmallVector<bool> SpilledLocs; | |
| SmallVector<unsigned> LocSpillOffsets; | |
| for (unsigned LocNo : DbgValue.loc_nos()) { | |
| auto SpillIt = | |
| !DbgValue.isUndef() ? SpillOffsets.find(LocNo) : SpillOffsets.end(); | |
| bool Spilled = SpillIt != SpillOffsets.end(); | |
| SpilledLocs.push_back(Spilled); | |
| LocSpillOffsets.push_back(Spilled ? SpillIt->second : 0); | |
| } | |
| // If the interval start was trimmed to the lexical scope insert the | |
| // DBG_VALUE at the previous index (otherwise it appears after the | |
| // first instruction in the range). | |
| if (trimmedDefs.count(Start)) | |
| Start = Start.getPrevIndex(); | |
| LLVM_DEBUG(auto &dbg = dbgs(); dbg << "\t[" << Start << ';' << Stop << "):"; | |
| DbgValue.printLocNos(dbg)); | |
| MachineFunction::iterator MBB = LIS.getMBBFromIndex(Start)->getIterator(); | |
| SlotIndex MBBEnd = LIS.getMBBEndIdx(&*MBB); | |
| LLVM_DEBUG(dbgs() << ' ' << printMBBReference(*MBB) << '-' << MBBEnd); | |
| insertDebugValue(&*MBB, Start, Stop, DbgValue, SpilledLocs, LocSpillOffsets, | |
| LIS, TII, TRI, BBSkipInstsMap); | |
| // This interval may span multiple basic blocks. | |
| // Insert a DBG_VALUE into each one. | |
| while (Stop > MBBEnd) { | |
| // Move to the next block. | |
| Start = MBBEnd; | |
| if (++MBB == MFEnd) | |
| break; | |
| MBBEnd = LIS.getMBBEndIdx(&*MBB); | |
| LLVM_DEBUG(dbgs() << ' ' << printMBBReference(*MBB) << '-' << MBBEnd); | |
| insertDebugValue(&*MBB, Start, Stop, DbgValue, SpilledLocs, | |
| LocSpillOffsets, LIS, TII, TRI, BBSkipInstsMap); | |
| } | |
| LLVM_DEBUG(dbgs() << '\n'); | |
| if (MBB == MFEnd) | |
| break; | |
| ++I; | |
| } | |
| } | |
| void UserLabel::emitDebugLabel(LiveIntervals &LIS, const TargetInstrInfo &TII, | |
| BlockSkipInstsMap &BBSkipInstsMap) { | |
| LLVM_DEBUG(dbgs() << "\t" << loc); | |
| MachineFunction::iterator MBB = LIS.getMBBFromIndex(loc)->getIterator(); | |
| LLVM_DEBUG(dbgs() << ' ' << printMBBReference(*MBB)); | |
| insertDebugLabel(&*MBB, loc, LIS, TII, BBSkipInstsMap); | |
| LLVM_DEBUG(dbgs() << '\n'); | |
| } | |
| void LiveDebugVariables::LDVImpl::emitDebugValues(VirtRegMap *VRM) { | |
| LLVM_DEBUG(dbgs() << "********** EMITTING LIVE DEBUG VARIABLES **********\n"); | |
| if (!MF) | |
| return; | |
| BlockSkipInstsMap BBSkipInstsMap; | |
| const TargetInstrInfo *TII = MF->getSubtarget().getInstrInfo(); | |
| SpillOffsetMap SpillOffsets; | |
| for (auto &userValue : userValues) { | |
| LLVM_DEBUG(userValue->print(dbgs(), TRI)); | |
| userValue->rewriteLocations(*VRM, *MF, *TII, *TRI, SpillOffsets); | |
| userValue->emitDebugValues(VRM, *LIS, *TII, *TRI, SpillOffsets, | |
| BBSkipInstsMap); | |
| } | |
| LLVM_DEBUG(dbgs() << "********** EMITTING LIVE DEBUG LABELS **********\n"); | |
| for (auto &userLabel : userLabels) { | |
| LLVM_DEBUG(userLabel->print(dbgs(), TRI)); | |
| userLabel->emitDebugLabel(*LIS, *TII, BBSkipInstsMap); | |
| } | |
| LLVM_DEBUG(dbgs() << "********** EMITTING DEBUG PHIS **********\n"); | |
| auto Slots = LIS->getSlotIndexes(); | |
| for (auto &It : PHIValToPos) { | |
| // For each ex-PHI, identify its physreg location or stack slot, and emit | |
| // a DBG_PHI for it. | |
| unsigned InstNum = It.first; | |
| auto Slot = It.second.SI; | |
| Register Reg = It.second.Reg; | |
| unsigned SubReg = It.second.SubReg; | |
| MachineBasicBlock *OrigMBB = Slots->getMBBFromIndex(Slot); | |
| if (VRM->isAssignedReg(Reg) && VRM->hasPhys(Reg)) { | |
| unsigned PhysReg = VRM->getPhys(Reg); | |
| if (SubReg != 0) | |
| PhysReg = TRI->getSubReg(PhysReg, SubReg); | |
| auto Builder = BuildMI(*OrigMBB, OrigMBB->begin(), DebugLoc(), | |
| TII->get(TargetOpcode::DBG_PHI)); | |
| Builder.addReg(PhysReg); | |
| Builder.addImm(InstNum); | |
| } else if (VRM->getStackSlot(Reg) != VirtRegMap::NO_STACK_SLOT) { | |
| const MachineRegisterInfo &MRI = MF->getRegInfo(); | |
| const TargetRegisterClass *TRC = MRI.getRegClass(Reg); | |
| unsigned SpillSize, SpillOffset; | |
| unsigned regSizeInBits = TRI->getRegSizeInBits(*TRC); | |
| if (SubReg) | |
| regSizeInBits = TRI->getSubRegIdxSize(SubReg); | |
| // Test whether this location is legal with the given subreg. If the | |
| // subregister has a nonzero offset, drop this location, it's too complex | |
| // to describe. (TODO: future work). | |
| bool Success = | |
| TII->getStackSlotRange(TRC, SubReg, SpillSize, SpillOffset, *MF); | |
| if (Success && SpillOffset == 0) { | |
| auto Builder = BuildMI(*OrigMBB, OrigMBB->begin(), DebugLoc(), | |
| TII->get(TargetOpcode::DBG_PHI)); | |
| Builder.addFrameIndex(VRM->getStackSlot(Reg)); | |
| Builder.addImm(InstNum); | |
| // Record how large the original value is. The stack slot might be | |
| // merged and altered during optimisation, but we will want to know how | |
| // large the value is, at this DBG_PHI. | |
| Builder.addImm(regSizeInBits); | |
| } | |
| LLVM_DEBUG(if (SpillOffset != 0) { | |
| dbgs() << "DBG_PHI for " << printReg(Reg, TRI, SubReg) | |
| << " has nonzero offset\n"; | |
| }); | |
| } | |
| // If there was no mapping for a value ID, it's optimized out. Create no | |
| // DBG_PHI, and any variables using this value will become optimized out. | |
| } | |
| MF->DebugPHIPositions.clear(); | |
| LLVM_DEBUG(dbgs() << "********** EMITTING INSTR REFERENCES **********\n"); | |
| // Re-insert any debug instrs back in the position they were. We must | |
| // re-insert in the same order to ensure that debug instructions don't swap, | |
| // which could re-order assignments. Do so in a batch -- once we find the | |
| // insert position, insert all instructions at the same SlotIdx. They are | |
| // guaranteed to appear in-sequence in StashedDebugInstrs because we insert | |
| // them in order. | |
| for (auto *StashIt = StashedDebugInstrs.begin(); | |
| StashIt != StashedDebugInstrs.end(); ++StashIt) { | |
| SlotIndex Idx = StashIt->Idx; | |
| MachineBasicBlock *MBB = StashIt->MBB; | |
| MachineInstr *MI = StashIt->MI; | |
| auto EmitInstsHere = [this, &StashIt, MBB, Idx, | |
| MI](MachineBasicBlock::iterator InsertPos) { | |
| // Insert this debug instruction. | |
| MBB->insert(InsertPos, MI); | |
| // Look at subsequent stashed debug instructions: if they're at the same | |
| // index, insert those too. | |
| auto NextItem = std::next(StashIt); | |
| while (NextItem != StashedDebugInstrs.end() && NextItem->Idx == Idx) { | |
| assert(NextItem->MBB == MBB && "Instrs with same slot index should be" | |
| "in the same block"); | |
| MBB->insert(InsertPos, NextItem->MI); | |
| StashIt = NextItem; | |
| NextItem = std::next(StashIt); | |
| }; | |
| }; | |
| // Start block index: find the first non-debug instr in the block, and | |
| // insert before it. | |
| if (Idx == Slots->getMBBStartIdx(MBB)) { | |
| MachineBasicBlock::iterator InsertPos = | |
| findInsertLocation(MBB, Idx, *LIS, BBSkipInstsMap); | |
| EmitInstsHere(InsertPos); | |
| continue; | |
| } | |
| if (MachineInstr *Pos = Slots->getInstructionFromIndex(Idx)) { | |
| // Insert at the end of any debug instructions. | |
| auto PostDebug = std::next(MachineBasicBlock::iterator(Pos)); | |
| PostDebug = skipDebugInstructionsForward(PostDebug, MBB->end()); | |
| EmitInstsHere(PostDebug); | |
| } else { | |
| // Insert position disappeared; walk forwards through slots until we | |
| // find a new one. | |
| SlotIndex End = Slots->getMBBEndIdx(MBB); | |
| for (; Idx < End; Idx = Slots->getNextNonNullIndex(Idx)) { | |
| Pos = Slots->getInstructionFromIndex(Idx); | |
| if (Pos) { | |
| EmitInstsHere(Pos->getIterator()); | |
| break; | |
| } | |
| } | |
| // We have reached the end of the block and didn't find anywhere to | |
| // insert! It's not safe to discard any debug instructions; place them | |
| // in front of the first terminator, or in front of end(). | |
| if (Idx >= End) { | |
| auto TermIt = MBB->getFirstTerminator(); | |
| EmitInstsHere(TermIt); | |
| } | |
| } | |
| } | |
| EmitDone = true; | |
| BBSkipInstsMap.clear(); | |
| } | |
| void LiveDebugVariables::emitDebugValues(VirtRegMap *VRM) { | |
| if (PImpl) | |
| PImpl->emitDebugValues(VRM); | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| LLVM_DUMP_METHOD void LiveDebugVariables::dump() const { print(dbgs()); } | |
| #endif | |
| void LiveDebugVariables::print(raw_ostream &OS) const { | |
| if (PImpl) | |
| PImpl->print(OS); | |
| } |