| # REQUIRES: aarch64 |
| # RUN: rm -rf %t && split-file %s %t |
| |
| # RUN: llvm-mc -filetype=obj -triple=aarch64 %t/a.s -o %t/a.o |
| # RUN: ld.lld %t/a.o -T %t/out-of-adr-range-low.t -o %t/a-low |
| # RUN: llvm-objdump --no-show-raw-insn -d %t/a-low | FileCheck %s --check-prefix=OUT-OF-RANGE |
| # RUN: ld.lld %t/a.o -T %t/out-of-adr-range-high.t -o %t/a-high |
| # RUN: llvm-objdump --no-show-raw-insn -d %t/a-high | FileCheck %s --check-prefix=OUT-OF-RANGE |
| |
| # OUT-OF-RANGE: adrp x30 |
| # OUT-OF-RANGE-NEXT: add x30, x30 |
| |
| # RUN: llvm-mc -filetype=obj -triple=aarch64 %t/a.s -o %t/a.o |
| # RUN: ld.lld %t/a.o -T %t/within-adr-range-low.t -o %t/a-low |
| # RUN: llvm-objdump --no-show-raw-insn -d %t/a-low | FileCheck %s --check-prefix=IN-RANGE-LOW |
| |
| # IN-RANGE-LOW: nop |
| # IN-RANGE-LOW-NEXT: adr x30 |
| # IN-RANGE-LOW-NEXT: adrp x1 |
| # IN-RANGE-LOW-NEXT: add x1 |
| # IN-RANGE-LOW-NEXT: adrp x15 |
| # IN-RANGE-LOW-NEXT: add x15 |
| |
| ## ADRP and ADD use different registers, no relaxations should be applied. |
| # IN-RANGE-LOW-NEXT: adrp x2 |
| # IN-RANGE-LOW-NEXT: add x3, x2 |
| |
| ## ADRP and ADD use different registers, no relaxations should be applied. |
| # IN-RANGE-LOW-NEXT: adrp x2 |
| # IN-RANGE-LOW-NEXT: add x2, x3 |
| |
| # RUN: ld.lld %t/a.o -T %t/within-adr-range-high.t -o %t/a-high |
| # RUN: llvm-objdump --no-show-raw-insn -d %t/a-high | FileCheck %s --check-prefix=IN-RANGE-HIGH |
| |
| # IN-RANGE-HIGH: nop |
| # IN-RANGE-HIGH-NEXT: adr x30 |
| # IN-RANGE-HIGH-NEXT: nop |
| # IN-RANGE-HIGH-NEXT: adr x1 |
| # IN-RANGE-HIGH-NEXT: nop |
| # IN-RANGE-HIGH-NEXT: adr x15 |
| |
| ## ADRP and ADD use different registers, no relaxations should be applied. |
| # IN-RANGE-HIGH-NEXT: adrp x2 |
| # IN-RANGE-HIGH-NEXT: add x3, x2 |
| |
| ## ADRP and ADD use different registers, no relaxations should be applied. |
| # IN-RANGE-HIGH-NEXT: adrp x2 |
| # IN-RANGE-HIGH-NEXT: add x2, x3 |
| |
| # RUN: llvm-mc -filetype=obj -triple=aarch64 %t/a.s -o %t/a.o |
| # RUN: ld.lld %t/a.o -T %t/within-adr-range-low.t --no-relax -o %t/a |
| ## --no-relax disables relaxations. |
| # RUN: llvm-objdump --no-show-raw-insn -d %t/a | FileCheck %s --check-prefix=OUT-OF-RANGE |
| |
| ## .rodata and .text are close to each other, |
| ## the adrp + add pair can be relaxed to nop + adr, moreover, the address difference |
| ## is equal to the lowest allowed value. |
| #--- within-adr-range-low.t |
| SECTIONS { |
| .rodata 0x1000: { *(.rodata) } |
| .text 0x100ffc: { *(.text) } |
| } |
| |
| ## .rodata and .text are far apart, |
| ## the adrp + add pair cannot be relaxed to nop + adr, moreover, the address difference |
| ## is equal to the lowest allowed value minus one. |
| #--- out-of-adr-range-low.t |
| SECTIONS { |
| .rodata 0x1000: { *(.rodata) } |
| .text 0x100ffd: { *(.text) } |
| } |
| |
| ## .rodata and .text are close to each other, |
| ## the adrp + add pair can be relaxed to nop + adr, moreover, the address difference |
| ## is equal to the highest allowed value. |
| #--- within-adr-range-high.t |
| SECTIONS { |
| .text 0x1000: { *(.text) } |
| .rodata 0x101003: { *(.rodata) } |
| } |
| |
| ## .rodata and .text are far apart, |
| ## the adrp + add pair cannot be relaxed to nop + adr, moreover, the address difference |
| ## is equal to the highest allowed value plus one. |
| #--- out-of-adr-range-high.t |
| SECTIONS { |
| .text 0x1000: { *(.text) } |
| .rodata 0x101004: { *(.rodata) } |
| } |
| |
| #--- a.s |
| .rodata |
| x: |
| .word 10 |
| .text |
| .global _start |
| _start: |
| adrp x30, x |
| add x30, x30, :lo12:x |
| adrp x1, x |
| add x1, x1, :lo12:x |
| adrp x15, x |
| add x15, x15, :lo12:x |
| adrp x2, x |
| add x3, x2, :lo12:x |
| adrp x2, x |
| add x2, x3, :lo12:x |