| //===-- Implementation header for asinf16 -----------------------*- C++ -*-===// | |
| // | |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. | |
| // See https://llvm.org/LICENSE.txt for license information. | |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #ifndef LLVM_LIBC_SRC___SUPPORT_MATH_ASINF16_H | |
| #define LLVM_LIBC_SRC___SUPPORT_MATH_ASINF16_H | |
| #include "include/llvm-libc-macros/float16-macros.h" | |
| #ifdef LIBC_TYPES_HAS_FLOAT16 | |
| #include "src/__support/FPUtil/FEnvImpl.h" | |
| #include "src/__support/FPUtil/FPBits.h" | |
| #include "src/__support/FPUtil/PolyEval.h" | |
| #include "src/__support/FPUtil/cast.h" | |
| #include "src/__support/FPUtil/multiply_add.h" | |
| #include "src/__support/FPUtil/sqrt.h" | |
| #include "src/__support/macros/optimization.h" | |
| namespace LIBC_NAMESPACE_DECL { | |
| namespace math { | |
| LIBC_INLINE constexpr float16 asinf16(float16 x) { | |
| // Generated by Sollya using the following command: | |
| // > round(pi/2, D, RN); | |
| constexpr float PI_2 = 0x1.921fb54442d18p0f; | |
| using FPBits = fputil::FPBits<float16>; | |
| FPBits xbits(x); | |
| uint16_t x_u = xbits.uintval(); | |
| uint16_t x_abs = x_u & 0x7fff; | |
| float xf = x; | |
| // |x| > 0x1p0, |x| > 1, or x is NaN. | |
| if (LIBC_UNLIKELY(x_abs > 0x3c00)) { | |
| // asinf16(NaN) = NaN | |
| if (xbits.is_nan()) { | |
| if (xbits.is_signaling_nan()) { | |
| fputil::raise_except_if_required(FE_INVALID); | |
| return FPBits::quiet_nan().get_val(); | |
| } | |
| return x; | |
| } | |
| // 1 < |x| <= +/-inf | |
| fputil::raise_except_if_required(FE_INVALID); | |
| fputil::set_errno_if_required(EDOM); | |
| return FPBits::quiet_nan().get_val(); | |
| } | |
| float xsq = xf * xf; | |
| // |x| <= 0x1p-1, |x| <= 0.5 | |
| if (x_abs <= 0x3800) { | |
| // asinf16(+/-0) = +/-0 | |
| if (LIBC_UNLIKELY(x_abs == 0)) | |
| return x; | |
| // Exhaustive tests show that, | |
| // for |x| <= 0x1.878p-9, when: | |
| // x > 0, and rounding upward, or | |
| // x < 0, and rounding downward, then, | |
| // asin(x) = x * 2^-11 + x | |
| // else, in other rounding modes, | |
| // asin(x) = x | |
| if (LIBC_UNLIKELY(x_abs <= 0x1a1e)) { | |
| #ifndef LIBC_MATH_HAS_ASSUME_ROUND_NEAREST_ONLY | |
| int rounding = fputil::quick_get_round(); | |
| if ((xbits.is_pos() && rounding == FE_UPWARD) || | |
| (xbits.is_neg() && rounding == FE_DOWNWARD)) | |
| return fputil::cast<float16>(fputil::multiply_add(xf, 0x1.0p-11f, xf)); | |
| #endif | |
| return x; | |
| } | |
| // Degree-6 minimax odd polynomial of asin(x) generated by Sollya with: | |
| // > P = fpminimax(asin(x)/x, [|0, 2, 4, 6, 8|], [|SG...|], [0, 0.5]); | |
| float result = | |
| fputil::polyeval(xsq, 0x1.000002p0f, 0x1.554c2ap-3f, 0x1.3541ccp-4f, | |
| 0x1.43b2d6p-5f, 0x1.a0d73ep-5f); | |
| return fputil::cast<float16>(xf * result); | |
| } | |
| // When |x| > 0.5, assume that 0.5 < |x| <= 1, | |
| // | |
| // Step-by-step range-reduction proof: | |
| // 1: Let y = asin(x), such that, x = sin(y) | |
| // 2: From complimentary angle identity: | |
| // x = sin(y) = cos(pi/2 - y) | |
| // 3: Let z = pi/2 - y, such that x = cos(z) | |
| // 4: From double angle formula; cos(2A) = 1 - sin^2(A): | |
| // z = 2A, z/2 = A | |
| // cos(z) = 1 - 2 * sin^2(z/2) | |
| // 5: Make sin(z/2) subject of the formula: | |
| // sin(z/2) = sqrt((1 - cos(z))/2) | |
| // 6: Recall [3]; x = cos(z). Therefore: | |
| // sin(z/2) = sqrt((1 - x)/2) | |
| // 7: Let u = (1 - x)/2 | |
| // 8: Therefore: | |
| // asin(sqrt(u)) = z/2 | |
| // 2 * asin(sqrt(u)) = z | |
| // 9: Recall [3], z = pi/2 - y. Therefore: | |
| // y = pi/2 - z | |
| // y = pi/2 - 2 * asin(sqrt(u)) | |
| // 10: Recall [1], y = asin(x). Therefore: | |
| // asin(x) = pi/2 - 2 * asin(sqrt(u)) | |
| // | |
| // WHY? | |
| // 11: Recall [7], u = (1 - x)/2 | |
| // 12: Since 0.5 < x <= 1, therefore: | |
| // 0 <= u <= 0.25 and 0 <= sqrt(u) <= 0.5 | |
| // | |
| // Hence, we can reuse the same [0, 0.5] domain polynomial approximation for | |
| // Step [10] as `sqrt(u)` is in range. | |
| // 0x1p-1 < |x| <= 0x1p0, 0.5 < |x| <= 1.0 | |
| float xf_abs = (xf < 0 ? -xf : xf); | |
| float sign = (xbits.uintval() >> 15 == 1 ? -1.0 : 1.0); | |
| float u = fputil::multiply_add(-0.5f, xf_abs, 0.5f); | |
| float u_sqrt = fputil::sqrt<float>(u); | |
| // Degree-6 minimax odd polynomial of asin(x) generated by Sollya with: | |
| // > P = fpminimax(asin(x)/x, [|0, 2, 4, 6, 8|], [|SG...|], [0, 0.5]); | |
| float asin_sqrt_u = | |
| u_sqrt * fputil::polyeval(u, 0x1.000002p0f, 0x1.554c2ap-3f, | |
| 0x1.3541ccp-4f, 0x1.43b2d6p-5f, 0x1.a0d73ep-5f); | |
| return fputil::cast<float16>(sign * | |
| fputil::multiply_add(-2.0f, asin_sqrt_u, PI_2)); | |
| } | |
| } // namespace math | |
| } // namespace LIBC_NAMESPACE_DECL | |
| #endif // LIBC_TYPES_HAS_FLOAT16 | |
| #endif // LLVM_LIBC_SRC___SUPPORT_MATH_ASINF16_H |