| //===- RegisterPressure.cpp - Dynamic Register Pressure -------------------===// |
| // |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. |
| // See https://llvm.org/LICENSE.txt for license information. |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file implements the RegisterPressure class which can be used to track |
| // MachineInstr level register pressure. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #include "llvm/CodeGen/RegisterPressure.h" |
| #include "llvm/ADT/ArrayRef.h" |
| #include "llvm/ADT/STLExtras.h" |
| #include "llvm/ADT/SmallVector.h" |
| #include "llvm/CodeGen/LiveInterval.h" |
| #include "llvm/CodeGen/LiveIntervals.h" |
| #include "llvm/CodeGen/MachineBasicBlock.h" |
| #include "llvm/CodeGen/MachineFunction.h" |
| #include "llvm/CodeGen/MachineInstr.h" |
| #include "llvm/CodeGen/MachineInstrBundle.h" |
| #include "llvm/CodeGen/MachineOperand.h" |
| #include "llvm/CodeGen/MachineRegisterInfo.h" |
| #include "llvm/CodeGen/RegisterClassInfo.h" |
| #include "llvm/CodeGen/SlotIndexes.h" |
| #include "llvm/CodeGen/TargetRegisterInfo.h" |
| #include "llvm/CodeGen/TargetSubtargetInfo.h" |
| #include "llvm/Config/llvm-config.h" |
| #include "llvm/MC/LaneBitmask.h" |
| #include "llvm/MC/MCRegisterInfo.h" |
| #include "llvm/Support/Compiler.h" |
| #include "llvm/Support/Debug.h" |
| #include "llvm/Support/ErrorHandling.h" |
| #include "llvm/Support/raw_ostream.h" |
| #include <algorithm> |
| #include <cassert> |
| #include <cstdint> |
| #include <cstdlib> |
| #include <cstring> |
| #include <iterator> |
| #include <limits> |
| #include <utility> |
| #include <vector> |
| |
| using namespace llvm; |
| |
| /// Increase pressure for each pressure set provided by TargetRegisterInfo. |
| static void increaseSetPressure(std::vector<unsigned> &CurrSetPressure, |
| const MachineRegisterInfo &MRI, unsigned Reg, |
| LaneBitmask PrevMask, LaneBitmask NewMask) { |
| assert((PrevMask & ~NewMask).none() && "Must not remove bits"); |
| if (PrevMask.any() || NewMask.none()) |
| return; |
| |
| PSetIterator PSetI = MRI.getPressureSets(Reg); |
| unsigned Weight = PSetI.getWeight(); |
| for (; PSetI.isValid(); ++PSetI) |
| CurrSetPressure[*PSetI] += Weight; |
| } |
| |
| /// Decrease pressure for each pressure set provided by TargetRegisterInfo. |
| static void decreaseSetPressure(std::vector<unsigned> &CurrSetPressure, |
| const MachineRegisterInfo &MRI, Register Reg, |
| LaneBitmask PrevMask, LaneBitmask NewMask) { |
| //assert((NewMask & !PrevMask) == 0 && "Must not add bits"); |
| if (NewMask.any() || PrevMask.none()) |
| return; |
| |
| PSetIterator PSetI = MRI.getPressureSets(Reg); |
| unsigned Weight = PSetI.getWeight(); |
| for (; PSetI.isValid(); ++PSetI) { |
| assert(CurrSetPressure[*PSetI] >= Weight && "register pressure underflow"); |
| CurrSetPressure[*PSetI] -= Weight; |
| } |
| } |
| |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) |
| LLVM_DUMP_METHOD |
| void llvm::dumpRegSetPressure(ArrayRef<unsigned> SetPressure, |
| const TargetRegisterInfo *TRI) { |
| bool Empty = true; |
| for (unsigned i = 0, e = SetPressure.size(); i < e; ++i) { |
| if (SetPressure[i] != 0) { |
| dbgs() << TRI->getRegPressureSetName(i) << "=" << SetPressure[i] << '\n'; |
| Empty = false; |
| } |
| } |
| if (Empty) |
| dbgs() << "\n"; |
| } |
| |
| LLVM_DUMP_METHOD |
| void RegisterPressure::dump(const TargetRegisterInfo *TRI) const { |
| dbgs() << "Max Pressure: "; |
| dumpRegSetPressure(MaxSetPressure, TRI); |
| dbgs() << "Live In: "; |
| for (const RegisterMaskPair &P : LiveInRegs) { |
| dbgs() << printVRegOrUnit(P.RegUnit, TRI); |
| if (!P.LaneMask.all()) |
| dbgs() << ':' << PrintLaneMask(P.LaneMask); |
| dbgs() << ' '; |
| } |
| dbgs() << '\n'; |
| dbgs() << "Live Out: "; |
| for (const RegisterMaskPair &P : LiveOutRegs) { |
| dbgs() << printVRegOrUnit(P.RegUnit, TRI); |
| if (!P.LaneMask.all()) |
| dbgs() << ':' << PrintLaneMask(P.LaneMask); |
| dbgs() << ' '; |
| } |
| dbgs() << '\n'; |
| } |
| |
| LLVM_DUMP_METHOD |
| void RegPressureTracker::dump() const { |
| if (!isTopClosed() || !isBottomClosed()) { |
| dbgs() << "Curr Pressure: "; |
| dumpRegSetPressure(CurrSetPressure, TRI); |
| } |
| P.dump(TRI); |
| } |
| |
| LLVM_DUMP_METHOD |
| void PressureDiff::dump(const TargetRegisterInfo &TRI) const { |
| const char *sep = ""; |
| for (const PressureChange &Change : *this) { |
| if (!Change.isValid()) |
| break; |
| dbgs() << sep << TRI.getRegPressureSetName(Change.getPSet()) |
| << " " << Change.getUnitInc(); |
| sep = " "; |
| } |
| dbgs() << '\n'; |
| } |
| |
| LLVM_DUMP_METHOD |
| void PressureChange::dump() const { |
| dbgs() << "[" << getPSetOrMax() << ", " << getUnitInc() << "]\n"; |
| } |
| |
| void RegPressureDelta::dump() const { |
| dbgs() << "[Excess="; |
| Excess.dump(); |
| dbgs() << ", CriticalMax="; |
| CriticalMax.dump(); |
| dbgs() << ", CurrentMax="; |
| CurrentMax.dump(); |
| dbgs() << "]\n"; |
| } |
| |
| #endif |
| |
| void RegPressureTracker::increaseRegPressure(Register RegUnit, |
| LaneBitmask PreviousMask, |
| LaneBitmask NewMask) { |
| if (PreviousMask.any() || NewMask.none()) |
| return; |
| |
| PSetIterator PSetI = MRI->getPressureSets(RegUnit); |
| unsigned Weight = PSetI.getWeight(); |
| for (; PSetI.isValid(); ++PSetI) { |
| CurrSetPressure[*PSetI] += Weight; |
| P.MaxSetPressure[*PSetI] = |
| std::max(P.MaxSetPressure[*PSetI], CurrSetPressure[*PSetI]); |
| } |
| } |
| |
| void RegPressureTracker::decreaseRegPressure(Register RegUnit, |
| LaneBitmask PreviousMask, |
| LaneBitmask NewMask) { |
| decreaseSetPressure(CurrSetPressure, *MRI, RegUnit, PreviousMask, NewMask); |
| } |
| |
| /// Clear the result so it can be used for another round of pressure tracking. |
| void IntervalPressure::reset() { |
| TopIdx = BottomIdx = SlotIndex(); |
| MaxSetPressure.clear(); |
| LiveInRegs.clear(); |
| LiveOutRegs.clear(); |
| } |
| |
| /// Clear the result so it can be used for another round of pressure tracking. |
| void RegionPressure::reset() { |
| TopPos = BottomPos = MachineBasicBlock::const_iterator(); |
| MaxSetPressure.clear(); |
| LiveInRegs.clear(); |
| LiveOutRegs.clear(); |
| } |
| |
| /// If the current top is not less than or equal to the next index, open it. |
| /// We happen to need the SlotIndex for the next top for pressure update. |
| void IntervalPressure::openTop(SlotIndex NextTop) { |
| if (TopIdx <= NextTop) |
| return; |
| TopIdx = SlotIndex(); |
| LiveInRegs.clear(); |
| } |
| |
| /// If the current top is the previous instruction (before receding), open it. |
| void RegionPressure::openTop(MachineBasicBlock::const_iterator PrevTop) { |
| if (TopPos != PrevTop) |
| return; |
| TopPos = MachineBasicBlock::const_iterator(); |
| LiveInRegs.clear(); |
| } |
| |
| /// If the current bottom is not greater than the previous index, open it. |
| void IntervalPressure::openBottom(SlotIndex PrevBottom) { |
| if (BottomIdx > PrevBottom) |
| return; |
| BottomIdx = SlotIndex(); |
| LiveInRegs.clear(); |
| } |
| |
| /// If the current bottom is the previous instr (before advancing), open it. |
| void RegionPressure::openBottom(MachineBasicBlock::const_iterator PrevBottom) { |
| if (BottomPos != PrevBottom) |
| return; |
| BottomPos = MachineBasicBlock::const_iterator(); |
| LiveInRegs.clear(); |
| } |
| |
| void LiveRegSet::init(const MachineRegisterInfo &MRI) { |
| const TargetRegisterInfo &TRI = *MRI.getTargetRegisterInfo(); |
| unsigned NumRegUnits = TRI.getNumRegs(); |
| unsigned NumVirtRegs = MRI.getNumVirtRegs(); |
| Regs.setUniverse(NumRegUnits + NumVirtRegs); |
| this->NumRegUnits = NumRegUnits; |
| } |
| |
| void LiveRegSet::clear() { |
| Regs.clear(); |
| } |
| |
| static const LiveRange *getLiveRange(const LiveIntervals &LIS, unsigned Reg) { |
| if (Register::isVirtualRegister(Reg)) |
| return &LIS.getInterval(Reg); |
| return LIS.getCachedRegUnit(Reg); |
| } |
| |
| void RegPressureTracker::reset() { |
| MBB = nullptr; |
| LIS = nullptr; |
| |
| CurrSetPressure.clear(); |
| LiveThruPressure.clear(); |
| P.MaxSetPressure.clear(); |
| |
| if (RequireIntervals) |
| static_cast<IntervalPressure&>(P).reset(); |
| else |
| static_cast<RegionPressure&>(P).reset(); |
| |
| LiveRegs.clear(); |
| UntiedDefs.clear(); |
| } |
| |
| /// Setup the RegPressureTracker. |
| /// |
| /// TODO: Add support for pressure without LiveIntervals. |
| void RegPressureTracker::init(const MachineFunction *mf, |
| const RegisterClassInfo *rci, |
| const LiveIntervals *lis, |
| const MachineBasicBlock *mbb, |
| MachineBasicBlock::const_iterator pos, |
| bool TrackLaneMasks, bool TrackUntiedDefs) { |
| reset(); |
| |
| MF = mf; |
| TRI = MF->getSubtarget().getRegisterInfo(); |
| RCI = rci; |
| MRI = &MF->getRegInfo(); |
| MBB = mbb; |
| this->TrackUntiedDefs = TrackUntiedDefs; |
| this->TrackLaneMasks = TrackLaneMasks; |
| |
| if (RequireIntervals) { |
| assert(lis && "IntervalPressure requires LiveIntervals"); |
| LIS = lis; |
| } |
| |
| CurrPos = pos; |
| CurrSetPressure.assign(TRI->getNumRegPressureSets(), 0); |
| |
| P.MaxSetPressure = CurrSetPressure; |
| |
| LiveRegs.init(*MRI); |
| if (TrackUntiedDefs) |
| UntiedDefs.setUniverse(MRI->getNumVirtRegs()); |
| } |
| |
| /// Does this pressure result have a valid top position and live ins. |
| bool RegPressureTracker::isTopClosed() const { |
| if (RequireIntervals) |
| return static_cast<IntervalPressure&>(P).TopIdx.isValid(); |
| return (static_cast<RegionPressure&>(P).TopPos == |
| MachineBasicBlock::const_iterator()); |
| } |
| |
| /// Does this pressure result have a valid bottom position and live outs. |
| bool RegPressureTracker::isBottomClosed() const { |
| if (RequireIntervals) |
| return static_cast<IntervalPressure&>(P).BottomIdx.isValid(); |
| return (static_cast<RegionPressure&>(P).BottomPos == |
| MachineBasicBlock::const_iterator()); |
| } |
| |
| SlotIndex RegPressureTracker::getCurrSlot() const { |
| MachineBasicBlock::const_iterator IdxPos = |
| skipDebugInstructionsForward(CurrPos, MBB->end()); |
| if (IdxPos == MBB->end()) |
| return LIS->getMBBEndIdx(MBB); |
| return LIS->getInstructionIndex(*IdxPos).getRegSlot(); |
| } |
| |
| /// Set the boundary for the top of the region and summarize live ins. |
| void RegPressureTracker::closeTop() { |
| if (RequireIntervals) |
| static_cast<IntervalPressure&>(P).TopIdx = getCurrSlot(); |
| else |
| static_cast<RegionPressure&>(P).TopPos = CurrPos; |
| |
| assert(P.LiveInRegs.empty() && "inconsistent max pressure result"); |
| P.LiveInRegs.reserve(LiveRegs.size()); |
| LiveRegs.appendTo(P.LiveInRegs); |
| } |
| |
| /// Set the boundary for the bottom of the region and summarize live outs. |
| void RegPressureTracker::closeBottom() { |
| if (RequireIntervals) |
| static_cast<IntervalPressure&>(P).BottomIdx = getCurrSlot(); |
| else |
| static_cast<RegionPressure&>(P).BottomPos = CurrPos; |
| |
| assert(P.LiveOutRegs.empty() && "inconsistent max pressure result"); |
| P.LiveOutRegs.reserve(LiveRegs.size()); |
| LiveRegs.appendTo(P.LiveOutRegs); |
| } |
| |
| /// Finalize the region boundaries and record live ins and live outs. |
| void RegPressureTracker::closeRegion() { |
| if (!isTopClosed() && !isBottomClosed()) { |
| assert(LiveRegs.size() == 0 && "no region boundary"); |
| return; |
| } |
| if (!isBottomClosed()) |
| closeBottom(); |
| else if (!isTopClosed()) |
| closeTop(); |
| // If both top and bottom are closed, do nothing. |
| } |
| |
| /// The register tracker is unaware of global liveness so ignores normal |
| /// live-thru ranges. However, two-address or coalesced chains can also lead |
| /// to live ranges with no holes. Count these to inform heuristics that we |
| /// can never drop below this pressure. |
| void RegPressureTracker::initLiveThru(const RegPressureTracker &RPTracker) { |
| LiveThruPressure.assign(TRI->getNumRegPressureSets(), 0); |
| assert(isBottomClosed() && "need bottom-up tracking to intialize."); |
| for (const RegisterMaskPair &Pair : P.LiveOutRegs) { |
| Register RegUnit = Pair.RegUnit; |
| if (Register::isVirtualRegister(RegUnit) |
| && !RPTracker.hasUntiedDef(RegUnit)) |
| increaseSetPressure(LiveThruPressure, *MRI, RegUnit, |
| LaneBitmask::getNone(), Pair.LaneMask); |
| } |
| } |
| |
| static LaneBitmask getRegLanes(ArrayRef<RegisterMaskPair> RegUnits, |
| Register RegUnit) { |
| auto I = llvm::find_if(RegUnits, [RegUnit](const RegisterMaskPair Other) { |
| return Other.RegUnit == RegUnit; |
| }); |
| if (I == RegUnits.end()) |
| return LaneBitmask::getNone(); |
| return I->LaneMask; |
| } |
| |
| static void addRegLanes(SmallVectorImpl<RegisterMaskPair> &RegUnits, |
| RegisterMaskPair Pair) { |
| Register RegUnit = Pair.RegUnit; |
| assert(Pair.LaneMask.any()); |
| auto I = llvm::find_if(RegUnits, [RegUnit](const RegisterMaskPair Other) { |
| return Other.RegUnit == RegUnit; |
| }); |
| if (I == RegUnits.end()) { |
| RegUnits.push_back(Pair); |
| } else { |
| I->LaneMask |= Pair.LaneMask; |
| } |
| } |
| |
| static void setRegZero(SmallVectorImpl<RegisterMaskPair> &RegUnits, |
| Register RegUnit) { |
| auto I = llvm::find_if(RegUnits, [RegUnit](const RegisterMaskPair Other) { |
| return Other.RegUnit == RegUnit; |
| }); |
| if (I == RegUnits.end()) { |
| RegUnits.push_back(RegisterMaskPair(RegUnit, LaneBitmask::getNone())); |
| } else { |
| I->LaneMask = LaneBitmask::getNone(); |
| } |
| } |
| |
| static void removeRegLanes(SmallVectorImpl<RegisterMaskPair> &RegUnits, |
| RegisterMaskPair Pair) { |
| Register RegUnit = Pair.RegUnit; |
| assert(Pair.LaneMask.any()); |
| auto I = llvm::find_if(RegUnits, [RegUnit](const RegisterMaskPair Other) { |
| return Other.RegUnit == RegUnit; |
| }); |
| if (I != RegUnits.end()) { |
| I->LaneMask &= ~Pair.LaneMask; |
| if (I->LaneMask.none()) |
| RegUnits.erase(I); |
| } |
| } |
| |
| static LaneBitmask |
| getLanesWithProperty(const LiveIntervals &LIS, const MachineRegisterInfo &MRI, |
| bool TrackLaneMasks, Register RegUnit, SlotIndex Pos, |
| LaneBitmask SafeDefault, |
| bool (*Property)(const LiveRange &LR, SlotIndex Pos)) { |
| if (RegUnit.isVirtual()) { |
| const LiveInterval &LI = LIS.getInterval(RegUnit); |
| LaneBitmask Result; |
| if (TrackLaneMasks && LI.hasSubRanges()) { |
| for (const LiveInterval::SubRange &SR : LI.subranges()) { |
| if (Property(SR, Pos)) |
| Result |= SR.LaneMask; |
| } |
| } else if (Property(LI, Pos)) { |
| Result = TrackLaneMasks ? MRI.getMaxLaneMaskForVReg(RegUnit) |
| : LaneBitmask::getAll(); |
| } |
| |
| return Result; |
| } else { |
| const LiveRange *LR = LIS.getCachedRegUnit(RegUnit); |
| // Be prepared for missing liveranges: We usually do not compute liveranges |
| // for physical registers on targets with many registers (GPUs). |
| if (LR == nullptr) |
| return SafeDefault; |
| return Property(*LR, Pos) ? LaneBitmask::getAll() : LaneBitmask::getNone(); |
| } |
| } |
| |
| static LaneBitmask getLiveLanesAt(const LiveIntervals &LIS, |
| const MachineRegisterInfo &MRI, |
| bool TrackLaneMasks, Register RegUnit, |
| SlotIndex Pos) { |
| return getLanesWithProperty(LIS, MRI, TrackLaneMasks, RegUnit, Pos, |
| LaneBitmask::getAll(), |
| [](const LiveRange &LR, SlotIndex Pos) { |
| return LR.liveAt(Pos); |
| }); |
| } |
| |
| namespace { |
| |
| /// Collect this instruction's unique uses and defs into SmallVectors for |
| /// processing defs and uses in order. |
| /// |
| /// FIXME: always ignore tied opers |
| class RegisterOperandsCollector { |
| friend class llvm::RegisterOperands; |
| |
| RegisterOperands &RegOpers; |
| const TargetRegisterInfo &TRI; |
| const MachineRegisterInfo &MRI; |
| bool IgnoreDead; |
| |
| RegisterOperandsCollector(RegisterOperands &RegOpers, |
| const TargetRegisterInfo &TRI, |
| const MachineRegisterInfo &MRI, bool IgnoreDead) |
| : RegOpers(RegOpers), TRI(TRI), MRI(MRI), IgnoreDead(IgnoreDead) {} |
| |
| void collectInstr(const MachineInstr &MI) const { |
| for (ConstMIBundleOperands OperI(MI); OperI.isValid(); ++OperI) |
| collectOperand(*OperI); |
| |
| // Remove redundant physreg dead defs. |
| for (const RegisterMaskPair &P : RegOpers.Defs) |
| removeRegLanes(RegOpers.DeadDefs, P); |
| } |
| |
| void collectInstrLanes(const MachineInstr &MI) const { |
| for (ConstMIBundleOperands OperI(MI); OperI.isValid(); ++OperI) |
| collectOperandLanes(*OperI); |
| |
| // Remove redundant physreg dead defs. |
| for (const RegisterMaskPair &P : RegOpers.Defs) |
| removeRegLanes(RegOpers.DeadDefs, P); |
| } |
| |
| /// Push this operand's register onto the correct vectors. |
| void collectOperand(const MachineOperand &MO) const { |
| if (!MO.isReg() || !MO.getReg()) |
| return; |
| Register Reg = MO.getReg(); |
| if (MO.isUse()) { |
| if (!MO.isUndef() && !MO.isInternalRead()) |
| pushReg(Reg, RegOpers.Uses); |
| } else { |
| assert(MO.isDef()); |
| // Subregister definitions may imply a register read. |
| if (MO.readsReg()) |
| pushReg(Reg, RegOpers.Uses); |
| |
| if (MO.isDead()) { |
| if (!IgnoreDead) |
| pushReg(Reg, RegOpers.DeadDefs); |
| } else |
| pushReg(Reg, RegOpers.Defs); |
| } |
| } |
| |
| void pushReg(Register Reg, |
| SmallVectorImpl<RegisterMaskPair> &RegUnits) const { |
| if (Reg.isVirtual()) { |
| addRegLanes(RegUnits, RegisterMaskPair(Reg, LaneBitmask::getAll())); |
| } else if (MRI.isAllocatable(Reg)) { |
| for (MCRegUnitIterator Units(Reg.asMCReg(), &TRI); Units.isValid(); |
| ++Units) |
| addRegLanes(RegUnits, RegisterMaskPair(*Units, LaneBitmask::getAll())); |
| } |
| } |
| |
| void collectOperandLanes(const MachineOperand &MO) const { |
| if (!MO.isReg() || !MO.getReg()) |
| return; |
| Register Reg = MO.getReg(); |
| unsigned SubRegIdx = MO.getSubReg(); |
| if (MO.isUse()) { |
| if (!MO.isUndef() && !MO.isInternalRead()) |
| pushRegLanes(Reg, SubRegIdx, RegOpers.Uses); |
| } else { |
| assert(MO.isDef()); |
| // Treat read-undef subreg defs as definitions of the whole register. |
| if (MO.isUndef()) |
| SubRegIdx = 0; |
| |
| if (MO.isDead()) { |
| if (!IgnoreDead) |
| pushRegLanes(Reg, SubRegIdx, RegOpers.DeadDefs); |
| } else |
| pushRegLanes(Reg, SubRegIdx, RegOpers.Defs); |
| } |
| } |
| |
| void pushRegLanes(Register Reg, unsigned SubRegIdx, |
| SmallVectorImpl<RegisterMaskPair> &RegUnits) const { |
| if (Reg.isVirtual()) { |
| LaneBitmask LaneMask = SubRegIdx != 0 |
| ? TRI.getSubRegIndexLaneMask(SubRegIdx) |
| : MRI.getMaxLaneMaskForVReg(Reg); |
| addRegLanes(RegUnits, RegisterMaskPair(Reg, LaneMask)); |
| } else if (MRI.isAllocatable(Reg)) { |
| for (MCRegUnitIterator Units(Reg.asMCReg(), &TRI); Units.isValid(); |
| ++Units) |
| addRegLanes(RegUnits, RegisterMaskPair(*Units, LaneBitmask::getAll())); |
| } |
| } |
| }; |
| |
| } // end anonymous namespace |
| |
| void RegisterOperands::collect(const MachineInstr &MI, |
| const TargetRegisterInfo &TRI, |
| const MachineRegisterInfo &MRI, |
| bool TrackLaneMasks, bool IgnoreDead) { |
| RegisterOperandsCollector Collector(*this, TRI, MRI, IgnoreDead); |
| if (TrackLaneMasks) |
| Collector.collectInstrLanes(MI); |
| else |
| Collector.collectInstr(MI); |
| } |
| |
| void RegisterOperands::detectDeadDefs(const MachineInstr &MI, |
| const LiveIntervals &LIS) { |
| SlotIndex SlotIdx = LIS.getInstructionIndex(MI); |
| for (auto RI = Defs.begin(); RI != Defs.end(); /*empty*/) { |
| Register Reg = RI->RegUnit; |
| const LiveRange *LR = getLiveRange(LIS, Reg); |
| if (LR != nullptr) { |
| LiveQueryResult LRQ = LR->Query(SlotIdx); |
| if (LRQ.isDeadDef()) { |
| // LiveIntervals knows this is a dead even though it's MachineOperand is |
| // not flagged as such. |
| DeadDefs.push_back(*RI); |
| RI = Defs.erase(RI); |
| continue; |
| } |
| } |
| ++RI; |
| } |
| } |
| |
| void RegisterOperands::adjustLaneLiveness(const LiveIntervals &LIS, |
| const MachineRegisterInfo &MRI, |
| SlotIndex Pos, |
| MachineInstr *AddFlagsMI) { |
| for (auto I = Defs.begin(); I != Defs.end(); ) { |
| LaneBitmask LiveAfter = getLiveLanesAt(LIS, MRI, true, I->RegUnit, |
| Pos.getDeadSlot()); |
| // If the def is all that is live after the instruction, then in case |
| // of a subregister def we need a read-undef flag. |
| Register RegUnit = I->RegUnit; |
| if (Register::isVirtualRegister(RegUnit) && |
| AddFlagsMI != nullptr && (LiveAfter & ~I->LaneMask).none()) |
| AddFlagsMI->setRegisterDefReadUndef(RegUnit); |
| |
| LaneBitmask ActualDef = I->LaneMask & LiveAfter; |
| if (ActualDef.none()) { |
| I = Defs.erase(I); |
| } else { |
| I->LaneMask = ActualDef; |
| ++I; |
| } |
| } |
| for (auto I = Uses.begin(); I != Uses.end(); ) { |
| LaneBitmask LiveBefore = getLiveLanesAt(LIS, MRI, true, I->RegUnit, |
| Pos.getBaseIndex()); |
| LaneBitmask LaneMask = I->LaneMask & LiveBefore; |
| if (LaneMask.none()) { |
| I = Uses.erase(I); |
| } else { |
| I->LaneMask = LaneMask; |
| ++I; |
| } |
| } |
| if (AddFlagsMI != nullptr) { |
| for (const RegisterMaskPair &P : DeadDefs) { |
| Register RegUnit = P.RegUnit; |
| if (!Register::isVirtualRegister(RegUnit)) |
| continue; |
| LaneBitmask LiveAfter = getLiveLanesAt(LIS, MRI, true, RegUnit, |
| Pos.getDeadSlot()); |
| if (LiveAfter.none()) |
| AddFlagsMI->setRegisterDefReadUndef(RegUnit); |
| } |
| } |
| } |
| |
| /// Initialize an array of N PressureDiffs. |
| void PressureDiffs::init(unsigned N) { |
| Size = N; |
| if (N <= Max) { |
| memset(PDiffArray, 0, N * sizeof(PressureDiff)); |
| return; |
| } |
| Max = Size; |
| free(PDiffArray); |
| PDiffArray = static_cast<PressureDiff*>(safe_calloc(N, sizeof(PressureDiff))); |
| } |
| |
| void PressureDiffs::addInstruction(unsigned Idx, |
| const RegisterOperands &RegOpers, |
| const MachineRegisterInfo &MRI) { |
| PressureDiff &PDiff = (*this)[Idx]; |
| assert(!PDiff.begin()->isValid() && "stale PDiff"); |
| for (const RegisterMaskPair &P : RegOpers.Defs) |
| PDiff.addPressureChange(P.RegUnit, true, &MRI); |
| |
| for (const RegisterMaskPair &P : RegOpers.Uses) |
| PDiff.addPressureChange(P.RegUnit, false, &MRI); |
| } |
| |
| /// Add a change in pressure to the pressure diff of a given instruction. |
| void PressureDiff::addPressureChange(Register RegUnit, bool IsDec, |
| const MachineRegisterInfo *MRI) { |
| PSetIterator PSetI = MRI->getPressureSets(RegUnit); |
| int Weight = IsDec ? -PSetI.getWeight() : PSetI.getWeight(); |
| for (; PSetI.isValid(); ++PSetI) { |
| // Find an existing entry in the pressure diff for this PSet. |
| PressureDiff::iterator I = nonconst_begin(), E = nonconst_end(); |
| for (; I != E && I->isValid(); ++I) { |
| if (I->getPSet() >= *PSetI) |
| break; |
| } |
| // If all pressure sets are more constrained, skip the remaining PSets. |
| if (I == E) |
| break; |
| // Insert this PressureChange. |
| if (!I->isValid() || I->getPSet() != *PSetI) { |
| PressureChange PTmp = PressureChange(*PSetI); |
| for (PressureDiff::iterator J = I; J != E && PTmp.isValid(); ++J) |
| std::swap(*J, PTmp); |
| } |
| // Update the units for this pressure set. |
| unsigned NewUnitInc = I->getUnitInc() + Weight; |
| if (NewUnitInc != 0) { |
| I->setUnitInc(NewUnitInc); |
| } else { |
| // Remove entry |
| PressureDiff::iterator J; |
| for (J = std::next(I); J != E && J->isValid(); ++J, ++I) |
| *I = *J; |
| *I = PressureChange(); |
| } |
| } |
| } |
| |
| /// Force liveness of registers. |
| void RegPressureTracker::addLiveRegs(ArrayRef<RegisterMaskPair> Regs) { |
| for (const RegisterMaskPair &P : Regs) { |
| LaneBitmask PrevMask = LiveRegs.insert(P); |
| LaneBitmask NewMask = PrevMask | P.LaneMask; |
| increaseRegPressure(P.RegUnit, PrevMask, NewMask); |
| } |
| } |
| |
| void RegPressureTracker::discoverLiveInOrOut(RegisterMaskPair Pair, |
| SmallVectorImpl<RegisterMaskPair> &LiveInOrOut) { |
| assert(Pair.LaneMask.any()); |
| |
| Register RegUnit = Pair.RegUnit; |
| auto I = llvm::find_if(LiveInOrOut, [RegUnit](const RegisterMaskPair &Other) { |
| return Other.RegUnit == RegUnit; |
| }); |
| LaneBitmask PrevMask; |
| LaneBitmask NewMask; |
| if (I == LiveInOrOut.end()) { |
| PrevMask = LaneBitmask::getNone(); |
| NewMask = Pair.LaneMask; |
| LiveInOrOut.push_back(Pair); |
| } else { |
| PrevMask = I->LaneMask; |
| NewMask = PrevMask | Pair.LaneMask; |
| I->LaneMask = NewMask; |
| } |
| increaseSetPressure(P.MaxSetPressure, *MRI, RegUnit, PrevMask, NewMask); |
| } |
| |
| void RegPressureTracker::discoverLiveIn(RegisterMaskPair Pair) { |
| discoverLiveInOrOut(Pair, P.LiveInRegs); |
| } |
| |
| void RegPressureTracker::discoverLiveOut(RegisterMaskPair Pair) { |
| discoverLiveInOrOut(Pair, P.LiveOutRegs); |
| } |
| |
| void RegPressureTracker::bumpDeadDefs(ArrayRef<RegisterMaskPair> DeadDefs) { |
| for (const RegisterMaskPair &P : DeadDefs) { |
| Register Reg = P.RegUnit; |
| LaneBitmask LiveMask = LiveRegs.contains(Reg); |
| LaneBitmask BumpedMask = LiveMask | P.LaneMask; |
| increaseRegPressure(Reg, LiveMask, BumpedMask); |
| } |
| for (const RegisterMaskPair &P : DeadDefs) { |
| Register Reg = P.RegUnit; |
| LaneBitmask LiveMask = LiveRegs.contains(Reg); |
| LaneBitmask BumpedMask = LiveMask | P.LaneMask; |
| decreaseRegPressure(Reg, BumpedMask, LiveMask); |
| } |
| } |
| |
| /// Recede across the previous instruction. If LiveUses is provided, record any |
| /// RegUnits that are made live by the current instruction's uses. This includes |
| /// registers that are both defined and used by the instruction. If a pressure |
| /// difference pointer is provided record the changes is pressure caused by this |
| /// instruction independent of liveness. |
| void RegPressureTracker::recede(const RegisterOperands &RegOpers, |
| SmallVectorImpl<RegisterMaskPair> *LiveUses) { |
| assert(!CurrPos->isDebugOrPseudoInstr()); |
| |
| // Boost pressure for all dead defs together. |
| bumpDeadDefs(RegOpers.DeadDefs); |
| |
| // Kill liveness at live defs. |
| // TODO: consider earlyclobbers? |
| for (const RegisterMaskPair &Def : RegOpers.Defs) { |
| Register Reg = Def.RegUnit; |
| |
| LaneBitmask PreviousMask = LiveRegs.erase(Def); |
| LaneBitmask NewMask = PreviousMask & ~Def.LaneMask; |
| |
| LaneBitmask LiveOut = Def.LaneMask & ~PreviousMask; |
| if (LiveOut.any()) { |
| discoverLiveOut(RegisterMaskPair(Reg, LiveOut)); |
| // Retroactively model effects on pressure of the live out lanes. |
| increaseSetPressure(CurrSetPressure, *MRI, Reg, LaneBitmask::getNone(), |
| LiveOut); |
| PreviousMask = LiveOut; |
| } |
| |
| if (NewMask.none()) { |
| // Add a 0 entry to LiveUses as a marker that the complete vreg has become |
| // dead. |
| if (TrackLaneMasks && LiveUses != nullptr) |
| setRegZero(*LiveUses, Reg); |
| } |
| |
| decreaseRegPressure(Reg, PreviousMask, NewMask); |
| } |
| |
| SlotIndex SlotIdx; |
| if (RequireIntervals) |
| SlotIdx = LIS->getInstructionIndex(*CurrPos).getRegSlot(); |
| |
| // Generate liveness for uses. |
| for (const RegisterMaskPair &Use : RegOpers.Uses) { |
| Register Reg = Use.RegUnit; |
| assert(Use.LaneMask.any()); |
| LaneBitmask PreviousMask = LiveRegs.insert(Use); |
| LaneBitmask NewMask = PreviousMask | Use.LaneMask; |
| if (NewMask == PreviousMask) |
| continue; |
| |
| // Did the register just become live? |
| if (PreviousMask.none()) { |
| if (LiveUses != nullptr) { |
| if (!TrackLaneMasks) { |
| addRegLanes(*LiveUses, RegisterMaskPair(Reg, NewMask)); |
| } else { |
| auto I = |
| llvm::find_if(*LiveUses, [Reg](const RegisterMaskPair Other) { |
| return Other.RegUnit == Reg; |
| }); |
| bool IsRedef = I != LiveUses->end(); |
| if (IsRedef) { |
| // ignore re-defs here... |
| assert(I->LaneMask.none()); |
| removeRegLanes(*LiveUses, RegisterMaskPair(Reg, NewMask)); |
| } else { |
| addRegLanes(*LiveUses, RegisterMaskPair(Reg, NewMask)); |
| } |
| } |
| } |
| |
| // Discover live outs if this may be the first occurance of this register. |
| if (RequireIntervals) { |
| LaneBitmask LiveOut = getLiveThroughAt(Reg, SlotIdx); |
| if (LiveOut.any()) |
| discoverLiveOut(RegisterMaskPair(Reg, LiveOut)); |
| } |
| } |
| |
| increaseRegPressure(Reg, PreviousMask, NewMask); |
| } |
| if (TrackUntiedDefs) { |
| for (const RegisterMaskPair &Def : RegOpers.Defs) { |
| Register RegUnit = Def.RegUnit; |
| if (Register::isVirtualRegister(RegUnit) && |
| (LiveRegs.contains(RegUnit) & Def.LaneMask).none()) |
| UntiedDefs.insert(RegUnit); |
| } |
| } |
| } |
| |
| void RegPressureTracker::recedeSkipDebugValues() { |
| assert(CurrPos != MBB->begin()); |
| if (!isBottomClosed()) |
| closeBottom(); |
| |
| // Open the top of the region using block iterators. |
| if (!RequireIntervals && isTopClosed()) |
| static_cast<RegionPressure&>(P).openTop(CurrPos); |
| |
| // Find the previous instruction. |
| CurrPos = prev_nodbg(CurrPos, MBB->begin()); |
| |
| SlotIndex SlotIdx; |
| if (RequireIntervals && !CurrPos->isDebugOrPseudoInstr()) |
| SlotIdx = LIS->getInstructionIndex(*CurrPos).getRegSlot(); |
| |
| // Open the top of the region using slot indexes. |
| if (RequireIntervals && isTopClosed()) |
| static_cast<IntervalPressure&>(P).openTop(SlotIdx); |
| } |
| |
| void RegPressureTracker::recede(SmallVectorImpl<RegisterMaskPair> *LiveUses) { |
| recedeSkipDebugValues(); |
| if (CurrPos->isDebugInstr() || CurrPos->isPseudoProbe()) { |
| // It's possible to only have debug_value and pseudo probe instructions and |
| // hit the start of the block. |
| assert(CurrPos == MBB->begin()); |
| return; |
| } |
| |
| const MachineInstr &MI = *CurrPos; |
| RegisterOperands RegOpers; |
| RegOpers.collect(MI, *TRI, *MRI, TrackLaneMasks, false); |
| if (TrackLaneMasks) { |
| SlotIndex SlotIdx = LIS->getInstructionIndex(*CurrPos).getRegSlot(); |
| RegOpers.adjustLaneLiveness(*LIS, *MRI, SlotIdx); |
| } else if (RequireIntervals) { |
| RegOpers.detectDeadDefs(MI, *LIS); |
| } |
| |
| recede(RegOpers, LiveUses); |
| } |
| |
| /// Advance across the current instruction. |
| void RegPressureTracker::advance(const RegisterOperands &RegOpers) { |
| assert(!TrackUntiedDefs && "unsupported mode"); |
| assert(CurrPos != MBB->end()); |
| if (!isTopClosed()) |
| closeTop(); |
| |
| SlotIndex SlotIdx; |
| if (RequireIntervals) |
| SlotIdx = getCurrSlot(); |
| |
| // Open the bottom of the region using slot indexes. |
| if (isBottomClosed()) { |
| if (RequireIntervals) |
| static_cast<IntervalPressure&>(P).openBottom(SlotIdx); |
| else |
| static_cast<RegionPressure&>(P).openBottom(CurrPos); |
| } |
| |
| for (const RegisterMaskPair &Use : RegOpers.Uses) { |
| Register Reg = Use.RegUnit; |
| LaneBitmask LiveMask = LiveRegs.contains(Reg); |
| LaneBitmask LiveIn = Use.LaneMask & ~LiveMask; |
| if (LiveIn.any()) { |
| discoverLiveIn(RegisterMaskPair(Reg, LiveIn)); |
| increaseRegPressure(Reg, LiveMask, LiveMask | LiveIn); |
| LiveRegs.insert(RegisterMaskPair(Reg, LiveIn)); |
| } |
| // Kill liveness at last uses. |
| if (RequireIntervals) { |
| LaneBitmask LastUseMask = getLastUsedLanes(Reg, SlotIdx); |
| if (LastUseMask.any()) { |
| LiveRegs.erase(RegisterMaskPair(Reg, LastUseMask)); |
| decreaseRegPressure(Reg, LiveMask, LiveMask & ~LastUseMask); |
| } |
| } |
| } |
| |
| // Generate liveness for defs. |
| for (const RegisterMaskPair &Def : RegOpers.Defs) { |
| LaneBitmask PreviousMask = LiveRegs.insert(Def); |
| LaneBitmask NewMask = PreviousMask | Def.LaneMask; |
| increaseRegPressure(Def.RegUnit, PreviousMask, NewMask); |
| } |
| |
| // Boost pressure for all dead defs together. |
| bumpDeadDefs(RegOpers.DeadDefs); |
| |
| // Find the next instruction. |
| CurrPos = next_nodbg(CurrPos, MBB->end()); |
| } |
| |
| void RegPressureTracker::advance() { |
| const MachineInstr &MI = *CurrPos; |
| RegisterOperands RegOpers; |
| RegOpers.collect(MI, *TRI, *MRI, TrackLaneMasks, false); |
| if (TrackLaneMasks) { |
| SlotIndex SlotIdx = getCurrSlot(); |
| RegOpers.adjustLaneLiveness(*LIS, *MRI, SlotIdx); |
| } |
| advance(RegOpers); |
| } |
| |
| /// Find the max change in excess pressure across all sets. |
| static void computeExcessPressureDelta(ArrayRef<unsigned> OldPressureVec, |
| ArrayRef<unsigned> NewPressureVec, |
| RegPressureDelta &Delta, |
| const RegisterClassInfo *RCI, |
| ArrayRef<unsigned> LiveThruPressureVec) { |
| Delta.Excess = PressureChange(); |
| for (unsigned i = 0, e = OldPressureVec.size(); i < e; ++i) { |
| unsigned POld = OldPressureVec[i]; |
| unsigned PNew = NewPressureVec[i]; |
| int PDiff = (int)PNew - (int)POld; |
| if (!PDiff) // No change in this set in the common case. |
| continue; |
| // Only consider change beyond the limit. |
| unsigned Limit = RCI->getRegPressureSetLimit(i); |
| if (!LiveThruPressureVec.empty()) |
| Limit += LiveThruPressureVec[i]; |
| |
| if (Limit > POld) { |
| if (Limit > PNew) |
| PDiff = 0; // Under the limit |
| else |
| PDiff = PNew - Limit; // Just exceeded limit. |
| } else if (Limit > PNew) |
| PDiff = Limit - POld; // Just obeyed limit. |
| |
| if (PDiff) { |
| Delta.Excess = PressureChange(i); |
| Delta.Excess.setUnitInc(PDiff); |
| break; |
| } |
| } |
| } |
| |
| /// Find the max change in max pressure that either surpasses a critical PSet |
| /// limit or exceeds the current MaxPressureLimit. |
| /// |
| /// FIXME: comparing each element of the old and new MaxPressure vectors here is |
| /// silly. It's done now to demonstrate the concept but will go away with a |
| /// RegPressureTracker API change to work with pressure differences. |
| static void computeMaxPressureDelta(ArrayRef<unsigned> OldMaxPressureVec, |
| ArrayRef<unsigned> NewMaxPressureVec, |
| ArrayRef<PressureChange> CriticalPSets, |
| ArrayRef<unsigned> MaxPressureLimit, |
| RegPressureDelta &Delta) { |
| Delta.CriticalMax = PressureChange(); |
| Delta.CurrentMax = PressureChange(); |
| |
| unsigned CritIdx = 0, CritEnd = CriticalPSets.size(); |
| for (unsigned i = 0, e = OldMaxPressureVec.size(); i < e; ++i) { |
| unsigned POld = OldMaxPressureVec[i]; |
| unsigned PNew = NewMaxPressureVec[i]; |
| if (PNew == POld) // No change in this set in the common case. |
| continue; |
| |
| if (!Delta.CriticalMax.isValid()) { |
| while (CritIdx != CritEnd && CriticalPSets[CritIdx].getPSet() < i) |
| ++CritIdx; |
| |
| if (CritIdx != CritEnd && CriticalPSets[CritIdx].getPSet() == i) { |
| int PDiff = (int)PNew - (int)CriticalPSets[CritIdx].getUnitInc(); |
| if (PDiff > 0) { |
| Delta.CriticalMax = PressureChange(i); |
| Delta.CriticalMax.setUnitInc(PDiff); |
| } |
| } |
| } |
| // Find the first increase above MaxPressureLimit. |
| // (Ignores negative MDiff). |
| if (!Delta.CurrentMax.isValid() && PNew > MaxPressureLimit[i]) { |
| Delta.CurrentMax = PressureChange(i); |
| Delta.CurrentMax.setUnitInc(PNew - POld); |
| if (CritIdx == CritEnd || Delta.CriticalMax.isValid()) |
| break; |
| } |
| } |
| } |
| |
| /// Record the upward impact of a single instruction on current register |
| /// pressure. Unlike the advance/recede pressure tracking interface, this does |
| /// not discover live in/outs. |
| /// |
| /// This is intended for speculative queries. It leaves pressure inconsistent |
| /// with the current position, so must be restored by the caller. |
| void RegPressureTracker::bumpUpwardPressure(const MachineInstr *MI) { |
| assert(!MI->isDebugOrPseudoInstr() && "Expect a nondebug instruction."); |
| |
| SlotIndex SlotIdx; |
| if (RequireIntervals) |
| SlotIdx = LIS->getInstructionIndex(*MI).getRegSlot(); |
| |
| // Account for register pressure similar to RegPressureTracker::recede(). |
| RegisterOperands RegOpers; |
| RegOpers.collect(*MI, *TRI, *MRI, TrackLaneMasks, /*IgnoreDead=*/true); |
| assert(RegOpers.DeadDefs.size() == 0); |
| if (TrackLaneMasks) |
| RegOpers.adjustLaneLiveness(*LIS, *MRI, SlotIdx); |
| else if (RequireIntervals) |
| RegOpers.detectDeadDefs(*MI, *LIS); |
| |
| // Boost max pressure for all dead defs together. |
| // Since CurrSetPressure and MaxSetPressure |
| bumpDeadDefs(RegOpers.DeadDefs); |
| |
| // Kill liveness at live defs. |
| for (const RegisterMaskPair &P : RegOpers.Defs) { |
| Register Reg = P.RegUnit; |
| LaneBitmask LiveLanes = LiveRegs.contains(Reg); |
| LaneBitmask UseLanes = getRegLanes(RegOpers.Uses, Reg); |
| LaneBitmask DefLanes = P.LaneMask; |
| LaneBitmask LiveAfter = (LiveLanes & ~DefLanes) | UseLanes; |
| decreaseRegPressure(Reg, LiveLanes, LiveAfter); |
| } |
| // Generate liveness for uses. |
| for (const RegisterMaskPair &P : RegOpers.Uses) { |
| Register Reg = P.RegUnit; |
| LaneBitmask LiveLanes = LiveRegs.contains(Reg); |
| LaneBitmask LiveAfter = LiveLanes | P.LaneMask; |
| increaseRegPressure(Reg, LiveLanes, LiveAfter); |
| } |
| } |
| |
| /// Consider the pressure increase caused by traversing this instruction |
| /// bottom-up. Find the pressure set with the most change beyond its pressure |
| /// limit based on the tracker's current pressure, and return the change in |
| /// number of register units of that pressure set introduced by this |
| /// instruction. |
| /// |
| /// This assumes that the current LiveOut set is sufficient. |
| /// |
| /// This is expensive for an on-the-fly query because it calls |
| /// bumpUpwardPressure to recompute the pressure sets based on current |
| /// liveness. This mainly exists to verify correctness, e.g. with |
| /// -verify-misched. getUpwardPressureDelta is the fast version of this query |
| /// that uses the per-SUnit cache of the PressureDiff. |
| void RegPressureTracker:: |
| getMaxUpwardPressureDelta(const MachineInstr *MI, PressureDiff *PDiff, |
| RegPressureDelta &Delta, |
| ArrayRef<PressureChange> CriticalPSets, |
| ArrayRef<unsigned> MaxPressureLimit) { |
| // Snapshot Pressure. |
| // FIXME: The snapshot heap space should persist. But I'm planning to |
| // summarize the pressure effect so we don't need to snapshot at all. |
| std::vector<unsigned> SavedPressure = CurrSetPressure; |
| std::vector<unsigned> SavedMaxPressure = P.MaxSetPressure; |
| |
| bumpUpwardPressure(MI); |
| |
| computeExcessPressureDelta(SavedPressure, CurrSetPressure, Delta, RCI, |
| LiveThruPressure); |
| computeMaxPressureDelta(SavedMaxPressure, P.MaxSetPressure, CriticalPSets, |
| MaxPressureLimit, Delta); |
| assert(Delta.CriticalMax.getUnitInc() >= 0 && |
| Delta.CurrentMax.getUnitInc() >= 0 && "cannot decrease max pressure"); |
| |
| // Restore the tracker's state. |
| P.MaxSetPressure.swap(SavedMaxPressure); |
| CurrSetPressure.swap(SavedPressure); |
| |
| #ifndef NDEBUG |
| if (!PDiff) |
| return; |
| |
| // Check if the alternate algorithm yields the same result. |
| RegPressureDelta Delta2; |
| getUpwardPressureDelta(MI, *PDiff, Delta2, CriticalPSets, MaxPressureLimit); |
| if (Delta != Delta2) { |
| dbgs() << "PDiff: "; |
| PDiff->dump(*TRI); |
| dbgs() << "DELTA: " << *MI; |
| if (Delta.Excess.isValid()) |
| dbgs() << "Excess1 " << TRI->getRegPressureSetName(Delta.Excess.getPSet()) |
| << " " << Delta.Excess.getUnitInc() << "\n"; |
| if (Delta.CriticalMax.isValid()) |
| dbgs() << "Critic1 " << TRI->getRegPressureSetName(Delta.CriticalMax.getPSet()) |
| << " " << Delta.CriticalMax.getUnitInc() << "\n"; |
| if (Delta.CurrentMax.isValid()) |
| dbgs() << "CurrMx1 " << TRI->getRegPressureSetName(Delta.CurrentMax.getPSet()) |
| << " " << Delta.CurrentMax.getUnitInc() << "\n"; |
| if (Delta2.Excess.isValid()) |
| dbgs() << "Excess2 " << TRI->getRegPressureSetName(Delta2.Excess.getPSet()) |
| << " " << Delta2.Excess.getUnitInc() << "\n"; |
| if (Delta2.CriticalMax.isValid()) |
| dbgs() << "Critic2 " << TRI->getRegPressureSetName(Delta2.CriticalMax.getPSet()) |
| << " " << Delta2.CriticalMax.getUnitInc() << "\n"; |
| if (Delta2.CurrentMax.isValid()) |
| dbgs() << "CurrMx2 " << TRI->getRegPressureSetName(Delta2.CurrentMax.getPSet()) |
| << " " << Delta2.CurrentMax.getUnitInc() << "\n"; |
| llvm_unreachable("RegP Delta Mismatch"); |
| } |
| #endif |
| } |
| |
| /// This is the fast version of querying register pressure that does not |
| /// directly depend on current liveness. |
| /// |
| /// @param Delta captures information needed for heuristics. |
| /// |
| /// @param CriticalPSets Are the pressure sets that are known to exceed some |
| /// limit within the region, not necessarily at the current position. |
| /// |
| /// @param MaxPressureLimit Is the max pressure within the region, not |
| /// necessarily at the current position. |
| void RegPressureTracker:: |
| getUpwardPressureDelta(const MachineInstr *MI, /*const*/ PressureDiff &PDiff, |
| RegPressureDelta &Delta, |
| ArrayRef<PressureChange> CriticalPSets, |
| ArrayRef<unsigned> MaxPressureLimit) const { |
| unsigned CritIdx = 0, CritEnd = CriticalPSets.size(); |
| for (PressureDiff::const_iterator |
| PDiffI = PDiff.begin(), PDiffE = PDiff.end(); |
| PDiffI != PDiffE && PDiffI->isValid(); ++PDiffI) { |
| |
| unsigned PSetID = PDiffI->getPSet(); |
| unsigned Limit = RCI->getRegPressureSetLimit(PSetID); |
| if (!LiveThruPressure.empty()) |
| Limit += LiveThruPressure[PSetID]; |
| |
| unsigned POld = CurrSetPressure[PSetID]; |
| unsigned MOld = P.MaxSetPressure[PSetID]; |
| unsigned MNew = MOld; |
| // Ignore DeadDefs here because they aren't captured by PressureChange. |
| unsigned PNew = POld + PDiffI->getUnitInc(); |
| assert((PDiffI->getUnitInc() >= 0) == (PNew >= POld) |
| && "PSet overflow/underflow"); |
| if (PNew > MOld) |
| MNew = PNew; |
| // Check if current pressure has exceeded the limit. |
| if (!Delta.Excess.isValid()) { |
| unsigned ExcessInc = 0; |
| if (PNew > Limit) |
| ExcessInc = POld > Limit ? PNew - POld : PNew - Limit; |
| else if (POld > Limit) |
| ExcessInc = Limit - POld; |
| if (ExcessInc) { |
| Delta.Excess = PressureChange(PSetID); |
| Delta.Excess.setUnitInc(ExcessInc); |
| } |
| } |
| // Check if max pressure has exceeded a critical pressure set max. |
| if (MNew == MOld) |
| continue; |
| if (!Delta.CriticalMax.isValid()) { |
| while (CritIdx != CritEnd && CriticalPSets[CritIdx].getPSet() < PSetID) |
| ++CritIdx; |
| |
| if (CritIdx != CritEnd && CriticalPSets[CritIdx].getPSet() == PSetID) { |
| int CritInc = (int)MNew - (int)CriticalPSets[CritIdx].getUnitInc(); |
| if (CritInc > 0 && CritInc <= std::numeric_limits<int16_t>::max()) { |
| Delta.CriticalMax = PressureChange(PSetID); |
| Delta.CriticalMax.setUnitInc(CritInc); |
| } |
| } |
| } |
| // Check if max pressure has exceeded the current max. |
| if (!Delta.CurrentMax.isValid() && MNew > MaxPressureLimit[PSetID]) { |
| Delta.CurrentMax = PressureChange(PSetID); |
| Delta.CurrentMax.setUnitInc(MNew - MOld); |
| } |
| } |
| } |
| |
| /// Helper to find a vreg use between two indices [PriorUseIdx, NextUseIdx). |
| /// The query starts with a lane bitmask which gets lanes/bits removed for every |
| /// use we find. |
| static LaneBitmask findUseBetween(unsigned Reg, LaneBitmask LastUseMask, |
| SlotIndex PriorUseIdx, SlotIndex NextUseIdx, |
| const MachineRegisterInfo &MRI, |
| const LiveIntervals *LIS) { |
| const TargetRegisterInfo &TRI = *MRI.getTargetRegisterInfo(); |
| for (const MachineOperand &MO : MRI.use_nodbg_operands(Reg)) { |
| if (MO.isUndef()) |
| continue; |
| const MachineInstr *MI = MO.getParent(); |
| SlotIndex InstSlot = LIS->getInstructionIndex(*MI).getRegSlot(); |
| if (InstSlot >= PriorUseIdx && InstSlot < NextUseIdx) { |
| unsigned SubRegIdx = MO.getSubReg(); |
| LaneBitmask UseMask = TRI.getSubRegIndexLaneMask(SubRegIdx); |
| LastUseMask &= ~UseMask; |
| if (LastUseMask.none()) |
| return LaneBitmask::getNone(); |
| } |
| } |
| return LastUseMask; |
| } |
| |
| LaneBitmask RegPressureTracker::getLiveLanesAt(Register RegUnit, |
| SlotIndex Pos) const { |
| assert(RequireIntervals); |
| return getLanesWithProperty(*LIS, *MRI, TrackLaneMasks, RegUnit, Pos, |
| LaneBitmask::getAll(), |
| [](const LiveRange &LR, SlotIndex Pos) { |
| return LR.liveAt(Pos); |
| }); |
| } |
| |
| LaneBitmask RegPressureTracker::getLastUsedLanes(Register RegUnit, |
| SlotIndex Pos) const { |
| assert(RequireIntervals); |
| return getLanesWithProperty(*LIS, *MRI, TrackLaneMasks, RegUnit, |
| Pos.getBaseIndex(), LaneBitmask::getNone(), |
| [](const LiveRange &LR, SlotIndex Pos) { |
| const LiveRange::Segment *S = LR.getSegmentContaining(Pos); |
| return S != nullptr && S->end == Pos.getRegSlot(); |
| }); |
| } |
| |
| LaneBitmask RegPressureTracker::getLiveThroughAt(Register RegUnit, |
| SlotIndex Pos) const { |
| assert(RequireIntervals); |
| return getLanesWithProperty(*LIS, *MRI, TrackLaneMasks, RegUnit, Pos, |
| LaneBitmask::getNone(), |
| [](const LiveRange &LR, SlotIndex Pos) { |
| const LiveRange::Segment *S = LR.getSegmentContaining(Pos); |
| return S != nullptr && S->start < Pos.getRegSlot(true) && |
| S->end != Pos.getDeadSlot(); |
| }); |
| } |
| |
| /// Record the downward impact of a single instruction on current register |
| /// pressure. Unlike the advance/recede pressure tracking interface, this does |
| /// not discover live in/outs. |
| /// |
| /// This is intended for speculative queries. It leaves pressure inconsistent |
| /// with the current position, so must be restored by the caller. |
| void RegPressureTracker::bumpDownwardPressure(const MachineInstr *MI) { |
| assert(!MI->isDebugOrPseudoInstr() && "Expect a nondebug instruction."); |
| |
| SlotIndex SlotIdx; |
| if (RequireIntervals) |
| SlotIdx = LIS->getInstructionIndex(*MI).getRegSlot(); |
| |
| // Account for register pressure similar to RegPressureTracker::recede(). |
| RegisterOperands RegOpers; |
| RegOpers.collect(*MI, *TRI, *MRI, TrackLaneMasks, false); |
| if (TrackLaneMasks) |
| RegOpers.adjustLaneLiveness(*LIS, *MRI, SlotIdx); |
| |
| if (RequireIntervals) { |
| for (const RegisterMaskPair &Use : RegOpers.Uses) { |
| Register Reg = Use.RegUnit; |
| LaneBitmask LastUseMask = getLastUsedLanes(Reg, SlotIdx); |
| if (LastUseMask.none()) |
| continue; |
| // The LastUseMask is queried from the liveness information of instruction |
| // which may be further down the schedule. Some lanes may actually not be |
| // last uses for the current position. |
| // FIXME: allow the caller to pass in the list of vreg uses that remain |
| // to be bottom-scheduled to avoid searching uses at each query. |
| SlotIndex CurrIdx = getCurrSlot(); |
| LastUseMask |
| = findUseBetween(Reg, LastUseMask, CurrIdx, SlotIdx, *MRI, LIS); |
| if (LastUseMask.none()) |
| continue; |
| |
| LaneBitmask LiveMask = LiveRegs.contains(Reg); |
| LaneBitmask NewMask = LiveMask & ~LastUseMask; |
| decreaseRegPressure(Reg, LiveMask, NewMask); |
| } |
| } |
| |
| // Generate liveness for defs. |
| for (const RegisterMaskPair &Def : RegOpers.Defs) { |
| Register Reg = Def.RegUnit; |
| LaneBitmask LiveMask = LiveRegs.contains(Reg); |
| LaneBitmask NewMask = LiveMask | Def.LaneMask; |
| increaseRegPressure(Reg, LiveMask, NewMask); |
| } |
| |
| // Boost pressure for all dead defs together. |
| bumpDeadDefs(RegOpers.DeadDefs); |
| } |
| |
| /// Consider the pressure increase caused by traversing this instruction |
| /// top-down. Find the register class with the most change in its pressure limit |
| /// based on the tracker's current pressure, and return the number of excess |
| /// register units of that pressure set introduced by this instruction. |
| /// |
| /// This assumes that the current LiveIn set is sufficient. |
| /// |
| /// This is expensive for an on-the-fly query because it calls |
| /// bumpDownwardPressure to recompute the pressure sets based on current |
| /// liveness. We don't yet have a fast version of downward pressure tracking |
| /// analogous to getUpwardPressureDelta. |
| void RegPressureTracker:: |
| getMaxDownwardPressureDelta(const MachineInstr *MI, RegPressureDelta &Delta, |
| ArrayRef<PressureChange> CriticalPSets, |
| ArrayRef<unsigned> MaxPressureLimit) { |
| // Snapshot Pressure. |
| std::vector<unsigned> SavedPressure = CurrSetPressure; |
| std::vector<unsigned> SavedMaxPressure = P.MaxSetPressure; |
| |
| bumpDownwardPressure(MI); |
| |
| computeExcessPressureDelta(SavedPressure, CurrSetPressure, Delta, RCI, |
| LiveThruPressure); |
| computeMaxPressureDelta(SavedMaxPressure, P.MaxSetPressure, CriticalPSets, |
| MaxPressureLimit, Delta); |
| assert(Delta.CriticalMax.getUnitInc() >= 0 && |
| Delta.CurrentMax.getUnitInc() >= 0 && "cannot decrease max pressure"); |
| |
| // Restore the tracker's state. |
| P.MaxSetPressure.swap(SavedMaxPressure); |
| CurrSetPressure.swap(SavedPressure); |
| } |
| |
| /// Get the pressure of each PSet after traversing this instruction bottom-up. |
| void RegPressureTracker:: |
| getUpwardPressure(const MachineInstr *MI, |
| std::vector<unsigned> &PressureResult, |
| std::vector<unsigned> &MaxPressureResult) { |
| // Snapshot pressure. |
| PressureResult = CurrSetPressure; |
| MaxPressureResult = P.MaxSetPressure; |
| |
| bumpUpwardPressure(MI); |
| |
| // Current pressure becomes the result. Restore current pressure. |
| P.MaxSetPressure.swap(MaxPressureResult); |
| CurrSetPressure.swap(PressureResult); |
| } |
| |
| /// Get the pressure of each PSet after traversing this instruction top-down. |
| void RegPressureTracker:: |
| getDownwardPressure(const MachineInstr *MI, |
| std::vector<unsigned> &PressureResult, |
| std::vector<unsigned> &MaxPressureResult) { |
| // Snapshot pressure. |
| PressureResult = CurrSetPressure; |
| MaxPressureResult = P.MaxSetPressure; |
| |
| bumpDownwardPressure(MI); |
| |
| // Current pressure becomes the result. Restore current pressure. |
| P.MaxSetPressure.swap(MaxPressureResult); |
| CurrSetPressure.swap(PressureResult); |
| } |