| //===- LoopInfo.cpp - Natural Loop Calculator -----------------------------===// | |
| // | |
| // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. | |
| // See https://llvm.org/LICENSE.txt for license information. | |
| // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception | |
| // | |
| //===----------------------------------------------------------------------===// | |
| // | |
| // This file defines the LoopInfo class that is used to identify natural loops | |
| // and determine the loop depth of various nodes of the CFG. Note that the | |
| // loops identified may actually be several natural loops that share the same | |
| // header node... not just a single natural loop. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #include "llvm/Analysis/LoopInfo.h" | |
| #include "llvm/ADT/ScopeExit.h" | |
| #include "llvm/ADT/SmallPtrSet.h" | |
| #include "llvm/Analysis/IVDescriptors.h" | |
| #include "llvm/Analysis/LoopIterator.h" | |
| #include "llvm/Analysis/LoopNestAnalysis.h" | |
| #include "llvm/Analysis/MemorySSA.h" | |
| #include "llvm/Analysis/MemorySSAUpdater.h" | |
| #include "llvm/Analysis/ScalarEvolutionExpressions.h" | |
| #include "llvm/Analysis/ValueTracking.h" | |
| #include "llvm/Config/llvm-config.h" | |
| #include "llvm/IR/CFG.h" | |
| #include "llvm/IR/Constants.h" | |
| #include "llvm/IR/DebugLoc.h" | |
| #include "llvm/IR/Dominators.h" | |
| #include "llvm/IR/Instructions.h" | |
| #include "llvm/IR/LLVMContext.h" | |
| #include "llvm/IR/Metadata.h" | |
| #include "llvm/IR/Module.h" | |
| #include "llvm/IR/PassManager.h" | |
| #include "llvm/IR/PrintPasses.h" | |
| #include "llvm/IR/ProfDataUtils.h" | |
| #include "llvm/InitializePasses.h" | |
| #include "llvm/Support/CommandLine.h" | |
| #include "llvm/Support/Compiler.h" | |
| #include "llvm/Support/GenericLoopInfoImpl.h" | |
| #include "llvm/Support/raw_ostream.h" | |
| using namespace llvm; | |
| // Explicitly instantiate methods in LoopInfoImpl.h for IR-level Loops. | |
| template class LLVM_EXPORT_TEMPLATE llvm::LoopBase<BasicBlock, Loop>; | |
| template class LLVM_EXPORT_TEMPLATE llvm::LoopInfoBase<BasicBlock, Loop>; | |
| // Always verify loopinfo if expensive checking is enabled. | |
| #ifdef EXPENSIVE_CHECKS | |
| bool llvm::VerifyLoopInfo = true; | |
| #else | |
| bool llvm::VerifyLoopInfo = false; | |
| #endif | |
| static cl::opt<bool, true> | |
| VerifyLoopInfoX("verify-loop-info", cl::location(VerifyLoopInfo), | |
| cl::Hidden, cl::desc("Verify loop info (time consuming)")); | |
| namespace llvm { | |
| extern cl::opt<bool> ProfcheckDisableMetadataFixes; | |
| } // end namespace llvm | |
| //===----------------------------------------------------------------------===// | |
| // Loop implementation | |
| // | |
| bool Loop::isLoopInvariant(const Value *V) const { | |
| if (const Instruction *I = dyn_cast<Instruction>(V)) | |
| return !contains(I); | |
| return true; // All non-instructions are loop invariant | |
| } | |
| bool Loop::hasLoopInvariantOperands(const Instruction *I) const { | |
| return all_of(I->operands(), [&](Value *V) { return isLoopInvariant(V); }); | |
| } | |
| bool Loop::makeLoopInvariant(Value *V, bool &Changed, Instruction *InsertPt, | |
| MemorySSAUpdater *MSSAU, | |
| ScalarEvolution *SE) const { | |
| if (Instruction *I = dyn_cast<Instruction>(V)) | |
| return makeLoopInvariant(I, Changed, InsertPt, MSSAU, SE); | |
| return true; // All non-instructions are loop-invariant. | |
| } | |
| bool Loop::makeLoopInvariant(Instruction *I, bool &Changed, | |
| Instruction *InsertPt, MemorySSAUpdater *MSSAU, | |
| ScalarEvolution *SE) const { | |
| BasicBlock *OriginalParent = I->getParent(); | |
| // Test if the value is already loop-invariant. | |
| if (isLoopInvariant(I)) | |
| return true; | |
| if (!isSafeToSpeculativelyExecute(I)) | |
| return false; | |
| if (I->mayReadFromMemory()) | |
| return false; | |
| // EH block instructions are immobile. | |
| if (I->isEHPad()) | |
| return false; | |
| // Determine the insertion point, unless one was given. | |
| if (!InsertPt) { | |
| BasicBlock *Preheader = getLoopPreheader(); | |
| // Without a preheader, hoisting is not feasible. | |
| if (!Preheader) | |
| return false; | |
| InsertPt = Preheader->getTerminator(); | |
| } | |
| // Don't hoist instructions with loop-variant operands. | |
| for (Value *Operand : I->operands()) | |
| if (!makeLoopInvariant(Operand, Changed, InsertPt, MSSAU, SE)) | |
| return false; | |
| // Hoist. | |
| I->moveBefore(InsertPt->getIterator()); | |
| if (MSSAU) | |
| if (auto *MUD = MSSAU->getMemorySSA()->getMemoryAccess(I)) | |
| MSSAU->moveToPlace(MUD, InsertPt->getParent(), | |
| MemorySSA::BeforeTerminator); | |
| // We want to preserve profile metadata if possible. However, we need to | |
| // ensure that profile metadata would remain the same outside of the loop. | |
| // Given at this point we know the conditional is loop-invariant, we just | |
| // need to worry about other control flow in the loop conditioned on values | |
| // that are potentially not independent of the condition of the instruction | |
| // we are interested in hoisting. Given this is not knowable in the general | |
| // case, we only hoist from a loop header (which covers a reasonable number | |
| // of cases) where we are guaranteed to not run into problems. | |
| SmallVector<unsigned, 1> ProfileMetadataToPreserve; | |
| if (!ProfcheckDisableMetadataFixes) | |
| if (OriginalParent == getHeader()) | |
| ProfileMetadataToPreserve.push_back(LLVMContext::MD_prof); | |
| // There is possibility of hoisting this instruction above some arbitrary | |
| // condition. Any metadata defined on it can be control dependent on this | |
| // condition. Conservatively strip it here so that we don't give any wrong | |
| // information to the optimizer. | |
| I->dropUBImplyingAttrsAndUnknownMetadata(ProfileMetadataToPreserve); | |
| if (ProfileMetadataToPreserve.empty() && isa<SelectInst>(I)) | |
| setExplicitlyUnknownBranchWeightsIfProfiled(*I, "LoopInfo"); | |
| if (SE) | |
| SE->forgetBlockAndLoopDispositions(I); | |
| Changed = true; | |
| return true; | |
| } | |
| bool Loop::getIncomingAndBackEdge(BasicBlock *&Incoming, | |
| BasicBlock *&Backedge) const { | |
| BasicBlock *H = getHeader(); | |
| Incoming = nullptr; | |
| Backedge = nullptr; | |
| pred_iterator PI = pred_begin(H); | |
| assert(PI != pred_end(H) && "Loop must have at least one backedge!"); | |
| Backedge = *PI++; | |
| if (PI == pred_end(H)) | |
| return false; // dead loop | |
| Incoming = *PI++; | |
| if (PI != pred_end(H)) | |
| return false; // multiple backedges? | |
| if (contains(Incoming)) { | |
| if (contains(Backedge)) | |
| return false; | |
| std::swap(Incoming, Backedge); | |
| } else if (!contains(Backedge)) | |
| return false; | |
| assert(Incoming && Backedge && "expected non-null incoming and backedges"); | |
| return true; | |
| } | |
| PHINode *Loop::getCanonicalInductionVariable() const { | |
| BasicBlock *H = getHeader(); | |
| BasicBlock *Incoming = nullptr, *Backedge = nullptr; | |
| if (!getIncomingAndBackEdge(Incoming, Backedge)) | |
| return nullptr; | |
| // Loop over all of the PHI nodes, looking for a canonical indvar. | |
| for (BasicBlock::iterator I = H->begin(); isa<PHINode>(I); ++I) { | |
| PHINode *PN = cast<PHINode>(I); | |
| if (ConstantInt *CI = | |
| dyn_cast<ConstantInt>(PN->getIncomingValueForBlock(Incoming))) | |
| if (CI->isZero()) | |
| if (Instruction *Inc = | |
| dyn_cast<Instruction>(PN->getIncomingValueForBlock(Backedge))) | |
| if (Inc->getOpcode() == Instruction::Add && Inc->getOperand(0) == PN) | |
| if (ConstantInt *CI = dyn_cast<ConstantInt>(Inc->getOperand(1))) | |
| if (CI->isOne()) | |
| return PN; | |
| } | |
| return nullptr; | |
| } | |
| /// Get the latch condition instruction. | |
| ICmpInst *Loop::getLatchCmpInst() const { | |
| if (BasicBlock *Latch = getLoopLatch()) | |
| if (CondBrInst *BI = dyn_cast_or_null<CondBrInst>(Latch->getTerminator())) | |
| return dyn_cast<ICmpInst>(BI->getCondition()); | |
| return nullptr; | |
| } | |
| /// Return the final value of the loop induction variable if found. | |
| static Value *findFinalIVValue(const Loop &L, const PHINode &IndVar, | |
| const Instruction &StepInst) { | |
| ICmpInst *LatchCmpInst = L.getLatchCmpInst(); | |
| if (!LatchCmpInst) | |
| return nullptr; | |
| Value *Op0 = LatchCmpInst->getOperand(0); | |
| Value *Op1 = LatchCmpInst->getOperand(1); | |
| if (Op0 == &IndVar || Op0 == &StepInst) | |
| return Op1; | |
| if (Op1 == &IndVar || Op1 == &StepInst) | |
| return Op0; | |
| return nullptr; | |
| } | |
| std::optional<Loop::LoopBounds> | |
| Loop::LoopBounds::getBounds(const Loop &L, PHINode &IndVar, | |
| ScalarEvolution &SE) { | |
| InductionDescriptor IndDesc; | |
| if (!InductionDescriptor::isInductionPHI(&IndVar, &L, &SE, IndDesc)) | |
| return std::nullopt; | |
| Value *InitialIVValue = IndDesc.getStartValue(); | |
| Instruction *StepInst = IndDesc.getInductionBinOp(); | |
| if (!InitialIVValue || !StepInst) | |
| return std::nullopt; | |
| const SCEV *Step = IndDesc.getStep(); | |
| Value *StepInstOp1 = StepInst->getOperand(1); | |
| Value *StepInstOp0 = StepInst->getOperand(0); | |
| Value *StepValue = nullptr; | |
| if (SE.getSCEV(StepInstOp1) == Step) | |
| StepValue = StepInstOp1; | |
| else if (SE.getSCEV(StepInstOp0) == Step) | |
| StepValue = StepInstOp0; | |
| Value *FinalIVValue = findFinalIVValue(L, IndVar, *StepInst); | |
| if (!FinalIVValue) | |
| return std::nullopt; | |
| return LoopBounds(L, *InitialIVValue, *StepInst, StepValue, *FinalIVValue, | |
| SE); | |
| } | |
| using Direction = Loop::LoopBounds::Direction; | |
| ICmpInst::Predicate Loop::LoopBounds::getCanonicalPredicate() const { | |
| BasicBlock *Latch = L.getLoopLatch(); | |
| assert(Latch && "Expecting valid latch"); | |
| CondBrInst *BI = cast<CondBrInst>(Latch->getTerminator()); | |
| ICmpInst *LatchCmpInst = dyn_cast<ICmpInst>(BI->getCondition()); | |
| assert(LatchCmpInst && | |
| "Expecting the latch compare instruction to be a CmpInst"); | |
| // Need to inverse the predicate when first successor is not the loop | |
| // header | |
| ICmpInst::Predicate Pred = (BI->getSuccessor(0) == L.getHeader()) | |
| ? LatchCmpInst->getPredicate() | |
| : LatchCmpInst->getInversePredicate(); | |
| if (LatchCmpInst->getOperand(0) == &getFinalIVValue()) | |
| Pred = ICmpInst::getSwappedPredicate(Pred); | |
| // Need to flip strictness of the predicate when the latch compare instruction | |
| // is not using StepInst | |
| if (LatchCmpInst->getOperand(0) == &getStepInst() || | |
| LatchCmpInst->getOperand(1) == &getStepInst()) | |
| return Pred; | |
| // Cannot flip strictness of NE and EQ | |
| if (Pred != ICmpInst::ICMP_NE && Pred != ICmpInst::ICMP_EQ) | |
| return ICmpInst::getFlippedStrictnessPredicate(Pred); | |
| Direction D = getDirection(); | |
| if (D == Direction::Increasing) | |
| return ICmpInst::ICMP_SLT; | |
| if (D == Direction::Decreasing) | |
| return ICmpInst::ICMP_SGT; | |
| // If cannot determine the direction, then unable to find the canonical | |
| // predicate | |
| return ICmpInst::BAD_ICMP_PREDICATE; | |
| } | |
| Direction Loop::LoopBounds::getDirection() const { | |
| if (const SCEVAddRecExpr *StepAddRecExpr = | |
| dyn_cast<SCEVAddRecExpr>(SE.getSCEV(&getStepInst()))) | |
| if (const SCEV *StepRecur = StepAddRecExpr->getStepRecurrence(SE)) { | |
| if (SE.isKnownPositive(StepRecur)) | |
| return Direction::Increasing; | |
| if (SE.isKnownNegative(StepRecur)) | |
| return Direction::Decreasing; | |
| } | |
| return Direction::Unknown; | |
| } | |
| std::optional<Loop::LoopBounds> Loop::getBounds(ScalarEvolution &SE) const { | |
| if (PHINode *IndVar = getInductionVariable(SE)) | |
| return LoopBounds::getBounds(*this, *IndVar, SE); | |
| return std::nullopt; | |
| } | |
| PHINode *Loop::getInductionVariable(ScalarEvolution &SE) const { | |
| if (!isLoopSimplifyForm()) | |
| return nullptr; | |
| BasicBlock *Header = getHeader(); | |
| assert(Header && "Expected a valid loop header"); | |
| ICmpInst *CmpInst = getLatchCmpInst(); | |
| if (!CmpInst) | |
| return nullptr; | |
| Value *LatchCmpOp0 = CmpInst->getOperand(0); | |
| Value *LatchCmpOp1 = CmpInst->getOperand(1); | |
| for (PHINode &IndVar : Header->phis()) { | |
| InductionDescriptor IndDesc; | |
| if (!InductionDescriptor::isInductionPHI(&IndVar, this, &SE, IndDesc)) | |
| continue; | |
| BasicBlock *Latch = getLoopLatch(); | |
| Value *StepInst = IndVar.getIncomingValueForBlock(Latch); | |
| // case 1: | |
| // IndVar = phi[{InitialValue, preheader}, {StepInst, latch}] | |
| // StepInst = IndVar + step | |
| // cmp = StepInst < FinalValue | |
| if (StepInst == LatchCmpOp0 || StepInst == LatchCmpOp1) | |
| return &IndVar; | |
| // case 2: | |
| // IndVar = phi[{InitialValue, preheader}, {StepInst, latch}] | |
| // StepInst = IndVar + step | |
| // cmp = IndVar < FinalValue | |
| if (&IndVar == LatchCmpOp0 || &IndVar == LatchCmpOp1) | |
| return &IndVar; | |
| } | |
| return nullptr; | |
| } | |
| bool Loop::getInductionDescriptor(ScalarEvolution &SE, | |
| InductionDescriptor &IndDesc) const { | |
| if (PHINode *IndVar = getInductionVariable(SE)) | |
| return InductionDescriptor::isInductionPHI(IndVar, this, &SE, IndDesc); | |
| return false; | |
| } | |
| bool Loop::isAuxiliaryInductionVariable(PHINode &AuxIndVar, | |
| ScalarEvolution &SE) const { | |
| // Located in the loop header | |
| BasicBlock *Header = getHeader(); | |
| if (AuxIndVar.getParent() != Header) | |
| return false; | |
| // No uses outside of the loop | |
| for (User *U : AuxIndVar.users()) | |
| if (const Instruction *I = dyn_cast<Instruction>(U)) | |
| if (!contains(I)) | |
| return false; | |
| InductionDescriptor IndDesc; | |
| if (!InductionDescriptor::isInductionPHI(&AuxIndVar, this, &SE, IndDesc)) | |
| return false; | |
| // The step instruction opcode should be add or sub. | |
| if (IndDesc.getInductionOpcode() != Instruction::Add && | |
| IndDesc.getInductionOpcode() != Instruction::Sub) | |
| return false; | |
| // Incremented by a loop invariant step for each loop iteration | |
| return SE.isLoopInvariant(IndDesc.getStep(), this); | |
| } | |
| CondBrInst *Loop::getLoopGuardBranch() const { | |
| if (!isLoopSimplifyForm()) | |
| return nullptr; | |
| BasicBlock *Preheader = getLoopPreheader(); | |
| assert(Preheader && getLoopLatch() && | |
| "Expecting a loop with valid preheader and latch"); | |
| // Loop should be in rotate form. | |
| if (!isRotatedForm()) | |
| return nullptr; | |
| // Disallow loops with more than one unique exit block, as we do not verify | |
| // that GuardOtherSucc post dominates all exit blocks. | |
| BasicBlock *ExitFromLatch = getUniqueExitBlock(); | |
| if (!ExitFromLatch) | |
| return nullptr; | |
| BasicBlock *GuardBB = Preheader->getUniquePredecessor(); | |
| if (!GuardBB) | |
| return nullptr; | |
| assert(GuardBB->getTerminator() && "Expecting valid guard terminator"); | |
| CondBrInst *GuardBI = dyn_cast<CondBrInst>(GuardBB->getTerminator()); | |
| if (!GuardBI) | |
| return nullptr; | |
| BasicBlock *GuardOtherSucc = (GuardBI->getSuccessor(0) == Preheader) | |
| ? GuardBI->getSuccessor(1) | |
| : GuardBI->getSuccessor(0); | |
| // Check if ExitFromLatch (or any BasicBlock which is an empty unique | |
| // successor of ExitFromLatch) is equal to GuardOtherSucc. If | |
| // skipEmptyBlockUntil returns GuardOtherSucc, then the guard branch for the | |
| // loop is GuardBI (return GuardBI), otherwise return nullptr. | |
| if (&LoopNest::skipEmptyBlockUntil(ExitFromLatch, GuardOtherSucc, | |
| /*CheckUniquePred=*/true) == | |
| GuardOtherSucc) | |
| return GuardBI; | |
| else | |
| return nullptr; | |
| } | |
| bool Loop::isCanonical(ScalarEvolution &SE) const { | |
| InductionDescriptor IndDesc; | |
| if (!getInductionDescriptor(SE, IndDesc)) | |
| return false; | |
| ConstantInt *Init = dyn_cast_or_null<ConstantInt>(IndDesc.getStartValue()); | |
| if (!Init || !Init->isZero()) | |
| return false; | |
| if (IndDesc.getInductionOpcode() != Instruction::Add) | |
| return false; | |
| ConstantInt *Step = IndDesc.getConstIntStepValue(); | |
| if (!Step || !Step->isOne()) | |
| return false; | |
| return true; | |
| } | |
| // Check whether the use \p U of a value defined in block \p BB (which is part | |
| // of loop \p L) does not require a live-out phi, i.e. whether it is contained | |
| // in the loop for LCSSA purposes. | |
| static bool loopContainsUser(const Loop &L, const BasicBlock &BB, const Use &U, | |
| const DominatorTree &DT) { | |
| const Instruction *UI = cast<Instruction>(U.getUser()); | |
| const BasicBlock *UserBB = UI->getParent(); | |
| // For practical purposes, we consider that the use in a PHI | |
| // occurs in the respective predecessor block. For more info, | |
| // see the `phi` doc in LangRef and the LCSSA doc. | |
| if (const PHINode *P = dyn_cast<PHINode>(UI)) | |
| UserBB = P->getIncomingBlock(U); | |
| // Check the current block, as a fast-path, before checking whether | |
| // the use is anywhere in the loop. Most values are used in the same | |
| // block they are defined in. Also, blocks not reachable from the | |
| // entry are special; uses in them don't need to go through PHIs. | |
| if (UserBB != &BB && !L.contains(UserBB) && DT.isReachableFromEntry(UserBB)) | |
| return false; | |
| return true; | |
| } | |
| // Check that 'BB' doesn't have any uses outside of the 'L' | |
| static bool isBlockInLCSSAForm(const Loop &L, const BasicBlock &BB, | |
| const DominatorTree &DT, bool IgnoreTokens) { | |
| for (const Instruction &I : BB) { | |
| // Token-like values can't be used in PHI nodes and live-out token-like | |
| // values prevent loop optimizations, so for the purposes of considered | |
| // LCSSA form, we can ignore them. | |
| if (IgnoreTokens && I.getType()->isTokenLikeTy()) | |
| continue; | |
| for (const Use &U : I.uses()) { | |
| if (!loopContainsUser(L, BB, U, DT)) | |
| return false; | |
| } | |
| } | |
| return true; | |
| } | |
| bool Loop::isLCSSAForm(const DominatorTree &DT, bool IgnoreTokens) const { | |
| // For each block we check that it doesn't have any uses outside of this loop. | |
| return all_of(this->blocks(), [&](const BasicBlock *BB) { | |
| return isBlockInLCSSAForm(*this, *BB, DT, IgnoreTokens); | |
| }); | |
| } | |
| bool Loop::isRecursivelyLCSSAForm(const DominatorTree &DT, const LoopInfo &LI, | |
| bool IgnoreTokens) const { | |
| // For each block we check that it doesn't have any uses outside of its | |
| // innermost loop. This process will transitively guarantee that the current | |
| // loop and all of the nested loops are in LCSSA form. | |
| return all_of(this->blocks(), [&](const BasicBlock *BB) { | |
| return isBlockInLCSSAForm(*LI.getLoopFor(BB), *BB, DT, IgnoreTokens); | |
| }); | |
| } | |
| bool Loop::isLoopSimplifyForm() const { | |
| // Normal-form loops have a preheader, a single backedge, and all of their | |
| // exits have all their predecessors inside the loop. | |
| return getLoopPreheader() && getLoopLatch() && hasDedicatedExits(); | |
| } | |
| // Routines that reform the loop CFG and split edges often fail on indirectbr. | |
| bool Loop::isSafeToClone() const { | |
| // Return false if any loop blocks contain indirectbrs, or there are any calls | |
| // to noduplicate functions. | |
| for (BasicBlock *BB : this->blocks()) { | |
| if (isa<IndirectBrInst>(BB->getTerminator())) | |
| return false; | |
| for (Instruction &I : *BB) | |
| if (auto *CB = dyn_cast<CallBase>(&I)) | |
| if (CB->cannotDuplicate()) | |
| return false; | |
| } | |
| return true; | |
| } | |
| bool Loop::isSafeToCloneConditionally(const DominatorTree &DT) const { | |
| if (!isSafeToClone()) | |
| return false; | |
| for (BasicBlock *BB : this->blocks()) { | |
| for (Instruction &I : *BB) { | |
| // Token-like values cannot be used in PHI nodes, so cloning is only | |
| // possible if all their uses are contained in the loop. Uses within | |
| // the loop (even across blocks) are fine: cloning only requires | |
| // forming phis for values that are live-out of the loop. | |
| if (I.getType()->isTokenLikeTy()) { | |
| for (const Use &U : I.uses()) { | |
| if (!loopContainsUser(*this, *BB, U, DT)) | |
| return false; | |
| } | |
| } | |
| if (auto *CB = dyn_cast<CallBase>(&I)) { | |
| assert(!CB->cannotDuplicate() && "Checked by isSafeToClone()."); | |
| if (CB->isConvergent()) | |
| return false; | |
| } | |
| } | |
| } | |
| return true; | |
| } | |
| MDNode *Loop::getLoopID() const { | |
| MDNode *LoopID = nullptr; | |
| // Go through the latch blocks and check the terminator for the metadata. | |
| SmallVector<BasicBlock *, 4> LatchesBlocks; | |
| getLoopLatches(LatchesBlocks); | |
| for (BasicBlock *BB : LatchesBlocks) { | |
| Instruction *TI = BB->getTerminator(); | |
| MDNode *MD = TI->getMetadata(LLVMContext::MD_loop); | |
| if (!MD) | |
| return nullptr; | |
| if (!LoopID) | |
| LoopID = MD; | |
| else if (MD != LoopID) | |
| return nullptr; | |
| } | |
| if (!LoopID || LoopID->getNumOperands() == 0 || | |
| LoopID->getOperand(0) != LoopID) | |
| return nullptr; | |
| return LoopID; | |
| } | |
| void Loop::setLoopID(MDNode *LoopID) const { | |
| assert((!LoopID || LoopID->getNumOperands() > 0) && | |
| "Loop ID needs at least one operand"); | |
| assert((!LoopID || LoopID->getOperand(0) == LoopID) && | |
| "Loop ID should refer to itself"); | |
| SmallVector<BasicBlock *, 4> LoopLatches; | |
| getLoopLatches(LoopLatches); | |
| for (BasicBlock *BB : LoopLatches) | |
| BB->getTerminator()->setMetadata(LLVMContext::MD_loop, LoopID); | |
| } | |
| void Loop::setLoopAlreadyUnrolled() { | |
| addStringLoopAttribute("llvm.loop.unroll.disable", {"llvm.loop.unroll."}); | |
| } | |
| void Loop::setLoopMustProgress() { | |
| if (findOptionMDForLoop(this, "llvm.loop.mustprogress")) | |
| return; | |
| addStringLoopAttribute("llvm.loop.mustprogress"); | |
| } | |
| void Loop::addStringLoopAttribute(StringRef Name, | |
| ArrayRef<StringRef> RemovePrefixes) const { | |
| LLVMContext &Context = getHeader()->getContext(); | |
| MDNode *AttrMD = MDNode::get(Context, MDString::get(Context, Name)); | |
| MDNode *LoopID = getLoopID(); | |
| MDNode *NewLoopID = | |
| makePostTransformationMetadata(Context, LoopID, RemovePrefixes, {AttrMD}); | |
| setLoopID(NewLoopID); | |
| } | |
| void Loop::addIntLoopAttribute(StringRef Name, unsigned Value, | |
| ArrayRef<StringRef> RemovePrefixes) const { | |
| LLVMContext &Context = getHeader()->getContext(); | |
| MDNode *AttrMD = MDNode::get( | |
| Context, | |
| {MDString::get(Context, Name), | |
| ConstantAsMetadata::get(ConstantInt::get(Context, APInt(32, Value)))}); | |
| MDNode *LoopID = getLoopID(); | |
| MDNode *NewLoopID = | |
| makePostTransformationMetadata(Context, LoopID, RemovePrefixes, {AttrMD}); | |
| setLoopID(NewLoopID); | |
| } | |
| bool Loop::isAnnotatedParallel() const { | |
| MDNode *DesiredLoopIdMetadata = getLoopID(); | |
| if (!DesiredLoopIdMetadata) | |
| return false; | |
| MDNode *ParallelAccesses = | |
| findOptionMDForLoop(this, "llvm.loop.parallel_accesses"); | |
| SmallPtrSet<MDNode *, 4> | |
| ParallelAccessGroups; // For scalable 'contains' check. | |
| if (ParallelAccesses) { | |
| for (const MDOperand &MD : drop_begin(ParallelAccesses->operands())) { | |
| MDNode *AccGroup = cast<MDNode>(MD.get()); | |
| assert(isValidAsAccessGroup(AccGroup) && | |
| "List item must be an access group"); | |
| ParallelAccessGroups.insert(AccGroup); | |
| } | |
| } | |
| // The loop branch contains the parallel loop metadata. In order to ensure | |
| // that any parallel-loop-unaware optimization pass hasn't added loop-carried | |
| // dependencies (thus converted the loop back to a sequential loop), check | |
| // that all the memory instructions in the loop belong to an access group that | |
| // is parallel to this loop. | |
| for (BasicBlock *BB : this->blocks()) { | |
| for (Instruction &I : *BB) { | |
| if (!I.mayReadOrWriteMemory()) | |
| continue; | |
| if (MDNode *AccessGroup = I.getMetadata(LLVMContext::MD_access_group)) { | |
| auto ContainsAccessGroup = [&ParallelAccessGroups](MDNode *AG) -> bool { | |
| if (AG->getNumOperands() == 0) { | |
| assert(isValidAsAccessGroup(AG) && "Item must be an access group"); | |
| return ParallelAccessGroups.count(AG); | |
| } | |
| for (const MDOperand &AccessListItem : AG->operands()) { | |
| MDNode *AccGroup = cast<MDNode>(AccessListItem.get()); | |
| assert(isValidAsAccessGroup(AccGroup) && | |
| "List item must be an access group"); | |
| if (ParallelAccessGroups.count(AccGroup)) | |
| return true; | |
| } | |
| return false; | |
| }; | |
| if (ContainsAccessGroup(AccessGroup)) | |
| continue; | |
| } | |
| // The memory instruction can refer to the loop identifier metadata | |
| // directly or indirectly through another list metadata (in case of | |
| // nested parallel loops). The loop identifier metadata refers to | |
| // itself so we can check both cases with the same routine. | |
| MDNode *LoopIdMD = | |
| I.getMetadata(LLVMContext::MD_mem_parallel_loop_access); | |
| if (!LoopIdMD) | |
| return false; | |
| if (!llvm::is_contained(LoopIdMD->operands(), DesiredLoopIdMetadata)) | |
| return false; | |
| } | |
| } | |
| return true; | |
| } | |
| DebugLoc Loop::getStartLoc() const { return getLocRange().getStart(); } | |
| Loop::LocRange Loop::getLocRange() const { | |
| // If we have a debug location in the loop ID, then use it. | |
| if (MDNode *LoopID = getLoopID()) { | |
| DebugLoc Start; | |
| // We use the first DebugLoc in the header as the start location of the loop | |
| // and if there is a second DebugLoc in the header we use it as end location | |
| // of the loop. | |
| for (const MDOperand &MDO : llvm::drop_begin(LoopID->operands())) { | |
| if (DILocation *L = dyn_cast<DILocation>(MDO)) { | |
| if (!Start) | |
| Start = DebugLoc(L); | |
| else | |
| return LocRange(Start, DebugLoc(L)); | |
| } | |
| } | |
| if (Start) | |
| return LocRange(Start); | |
| } | |
| // Try the pre-header first. | |
| if (BasicBlock *PHeadBB = getLoopPreheader()) | |
| if (DebugLoc DL = PHeadBB->getTerminator()->getDebugLoc()) | |
| return LocRange(DL); | |
| // If we have no pre-header or there are no instructions with debug | |
| // info in it, try the header. | |
| if (BasicBlock *HeadBB = getHeader()) | |
| return LocRange(HeadBB->getTerminator()->getDebugLoc()); | |
| return LocRange(); | |
| } | |
| std::string Loop::getLocStr() const { | |
| std::string Result; | |
| raw_string_ostream OS(Result); | |
| if (const DebugLoc LoopDbgLoc = getStartLoc()) | |
| LoopDbgLoc.print(OS); | |
| else | |
| // Just print the module name. | |
| OS << getHeader()->getParent()->getParent()->getModuleIdentifier(); | |
| return Result; | |
| } | |
| #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) | |
| LLVM_DUMP_METHOD void Loop::dump() const { print(dbgs()); } | |
| LLVM_DUMP_METHOD void Loop::dumpVerbose() const { | |
| print(dbgs(), /*Verbose=*/true); | |
| } | |
| #endif | |
| //===----------------------------------------------------------------------===// | |
| // UnloopUpdater implementation | |
| // | |
| namespace { | |
| /// Find the new parent loop for all blocks within the "unloop" whose last | |
| /// backedges has just been removed. | |
| class UnloopUpdater { | |
| Loop &Unloop; | |
| LoopInfo *LI; | |
| LoopBlocksDFS DFS; | |
| // Map unloop's immediate subloops to their nearest reachable parents. Nested | |
| // loops within these subloops will not change parents. However, an immediate | |
| // subloop's new parent will be the nearest loop reachable from either its own | |
| // exits *or* any of its nested loop's exits. | |
| DenseMap<Loop *, Loop *> SubloopParents; | |
| // Flag the presence of an irreducible backedge whose destination is a block | |
| // directly contained by the original unloop. | |
| bool FoundIB = false; | |
| public: | |
| UnloopUpdater(Loop *UL, LoopInfo *LInfo) : Unloop(*UL), LI(LInfo), DFS(UL) {} | |
| void updateBlockParents(); | |
| void removeBlocksFromAncestors(); | |
| void updateSubloopParents(); | |
| protected: | |
| Loop *getNearestLoop(BasicBlock *BB, Loop *BBLoop); | |
| }; | |
| } // end anonymous namespace | |
| /// Update the parent loop for all blocks that are directly contained within the | |
| /// original "unloop". | |
| void UnloopUpdater::updateBlockParents() { | |
| if (Unloop.getNumBlocks()) { | |
| // Perform a post order CFG traversal of all blocks within this loop, | |
| // propagating the nearest loop from successors to predecessors. | |
| LoopBlocksTraversal Traversal(DFS, LI); | |
| for (BasicBlock *POI : Traversal) { | |
| Loop *L = LI->getLoopFor(POI); | |
| Loop *NL = getNearestLoop(POI, L); | |
| if (NL != L) { | |
| // For reducible loops, NL is now an ancestor of Unloop. | |
| assert((NL != &Unloop && (!NL || NL->contains(&Unloop))) && | |
| "uninitialized successor"); | |
| LI->changeLoopFor(POI, NL); | |
| } else { | |
| // Or the current block is part of a subloop, in which case its parent | |
| // is unchanged. | |
| assert((FoundIB || Unloop.contains(L)) && "uninitialized successor"); | |
| } | |
| } | |
| } | |
| // Each irreducible loop within the unloop induces a round of iteration using | |
| // the DFS result cached by Traversal. | |
| bool Changed = FoundIB; | |
| for (unsigned NIters = 0; Changed; ++NIters) { | |
| assert(NIters < Unloop.getNumBlocks() && "runaway iterative algorithm"); | |
| (void)NIters; | |
| // Iterate over the postorder list of blocks, propagating the nearest loop | |
| // from successors to predecessors as before. | |
| Changed = false; | |
| for (LoopBlocksDFS::POIterator POI = DFS.beginPostorder(), | |
| POE = DFS.endPostorder(); | |
| POI != POE; ++POI) { | |
| Loop *L = LI->getLoopFor(*POI); | |
| Loop *NL = getNearestLoop(*POI, L); | |
| if (NL != L) { | |
| assert(NL != &Unloop && (!NL || NL->contains(&Unloop)) && | |
| "uninitialized successor"); | |
| LI->changeLoopFor(*POI, NL); | |
| Changed = true; | |
| } | |
| } | |
| } | |
| } | |
| /// Remove unloop's blocks from all ancestors below their new parents. | |
| void UnloopUpdater::removeBlocksFromAncestors() { | |
| // Remove all unloop's blocks (including those in nested subloops) from | |
| // ancestors below the new parent loop. | |
| for (BasicBlock *BB : Unloop.blocks()) { | |
| Loop *OuterParent = LI->getLoopFor(BB); | |
| if (Unloop.contains(OuterParent)) { | |
| while (OuterParent->getParentLoop() != &Unloop) | |
| OuterParent = OuterParent->getParentLoop(); | |
| OuterParent = SubloopParents[OuterParent]; | |
| } | |
| // Remove blocks from former Ancestors except Unloop itself which will be | |
| // deleted. | |
| for (Loop *OldParent = Unloop.getParentLoop(); OldParent != OuterParent; | |
| OldParent = OldParent->getParentLoop()) { | |
| assert(OldParent && "new loop is not an ancestor of the original"); | |
| OldParent->removeBlockFromLoop(BB); | |
| } | |
| } | |
| } | |
| /// Update the parent loop for all subloops directly nested within unloop. | |
| void UnloopUpdater::updateSubloopParents() { | |
| while (!Unloop.isInnermost()) { | |
| Loop *Subloop = *std::prev(Unloop.end()); | |
| Unloop.removeChildLoop(std::prev(Unloop.end())); | |
| assert(SubloopParents.count(Subloop) && "DFS failed to visit subloop"); | |
| if (Loop *Parent = SubloopParents[Subloop]) | |
| Parent->addChildLoop(Subloop); | |
| else | |
| LI->addTopLevelLoop(Subloop); | |
| } | |
| } | |
| /// Return the nearest parent loop among this block's successors. If a successor | |
| /// is a subloop header, consider its parent to be the nearest parent of the | |
| /// subloop's exits. | |
| /// | |
| /// For subloop blocks, simply update SubloopParents and return NULL. | |
| Loop *UnloopUpdater::getNearestLoop(BasicBlock *BB, Loop *BBLoop) { | |
| // Initially for blocks directly contained by Unloop, NearLoop == Unloop and | |
| // is considered uninitialized. | |
| Loop *NearLoop = BBLoop; | |
| Loop *Subloop = nullptr; | |
| if (NearLoop != &Unloop && Unloop.contains(NearLoop)) { | |
| Subloop = NearLoop; | |
| // Find the subloop ancestor that is directly contained within Unloop. | |
| while (Subloop->getParentLoop() != &Unloop) { | |
| Subloop = Subloop->getParentLoop(); | |
| assert(Subloop && "subloop is not an ancestor of the original loop"); | |
| } | |
| // Get the current nearest parent of the Subloop exits, initially Unloop. | |
| NearLoop = SubloopParents.insert({Subloop, &Unloop}).first->second; | |
| } | |
| if (succ_empty(BB)) { | |
| assert(!Subloop && "subloop blocks must have a successor"); | |
| NearLoop = nullptr; // unloop blocks may now exit the function. | |
| } | |
| for (BasicBlock *Succ : successors(BB)) { | |
| if (Succ == BB) | |
| continue; // self loops are uninteresting | |
| Loop *L = LI->getLoopFor(Succ); | |
| if (L == &Unloop) { | |
| // This successor has not been processed. This path must lead to an | |
| // irreducible backedge. | |
| assert((FoundIB || !DFS.hasPostorder(Succ)) && "should have seen IB"); | |
| FoundIB = true; | |
| } | |
| if (L != &Unloop && Unloop.contains(L)) { | |
| // Successor is in a subloop. | |
| if (Subloop) | |
| continue; // Branching within subloops. Ignore it. | |
| // BB branches from the original into a subloop header. | |
| assert(L->getParentLoop() == &Unloop && "cannot skip into nested loops"); | |
| // Get the current nearest parent of the Subloop's exits. | |
| L = SubloopParents[L]; | |
| // L could be Unloop if the only exit was an irreducible backedge. | |
| } | |
| if (L == &Unloop) { | |
| continue; | |
| } | |
| // Handle critical edges from Unloop into a sibling loop. | |
| if (L && !L->contains(&Unloop)) { | |
| L = L->getParentLoop(); | |
| } | |
| // Remember the nearest parent loop among successors or subloop exits. | |
| if (NearLoop == &Unloop || !NearLoop || NearLoop->contains(L)) | |
| NearLoop = L; | |
| } | |
| if (Subloop) { | |
| SubloopParents[Subloop] = NearLoop; | |
| return BBLoop; | |
| } | |
| return NearLoop; | |
| } | |
| LoopInfo::LoopInfo(const DomTreeBase<BasicBlock> &DomTree) { analyze(DomTree); } | |
| bool LoopInfo::invalidate(Function &F, const PreservedAnalyses &PA, | |
| FunctionAnalysisManager::Invalidator &) { | |
| // Check whether the analysis, all analyses on functions, or the function's | |
| // CFG have been preserved. | |
| auto PAC = PA.getChecker<LoopAnalysis>(); | |
| return !(PAC.preserved() || PAC.preservedSet<AllAnalysesOn<Function>>() || | |
| PAC.preservedSet<CFGAnalyses>()); | |
| } | |
| void LoopInfo::erase(Loop *Unloop) { | |
| assert(!Unloop->isInvalid() && "Loop has already been erased!"); | |
| llvm::scope_exit InvalidateOnExit([&]() { destroy(Unloop); }); | |
| // First handle the special case of no parent loop to simplify the algorithm. | |
| if (Unloop->isOutermost()) { | |
| // Since BBLoop had no parent, Unloop blocks are no longer in a loop. | |
| for (BasicBlock *BB : Unloop->blocks()) { | |
| // Don't reparent blocks in subloops. | |
| if (getLoopFor(BB) != Unloop) | |
| continue; | |
| // Blocks no longer have a parent but are still referenced by Unloop until | |
| // the Unloop object is deleted. | |
| changeLoopFor(BB, nullptr); | |
| } | |
| // Remove the loop from the top-level LoopInfo object. | |
| for (iterator I = begin();; ++I) { | |
| assert(I != end() && "Couldn't find loop"); | |
| if (*I == Unloop) { | |
| removeLoop(I); | |
| break; | |
| } | |
| } | |
| // Move all of the subloops to the top-level. | |
| while (!Unloop->isInnermost()) | |
| addTopLevelLoop(Unloop->removeChildLoop(std::prev(Unloop->end()))); | |
| return; | |
| } | |
| // Update the parent loop for all blocks within the loop. Blocks within | |
| // subloops will not change parents. | |
| UnloopUpdater Updater(Unloop, this); | |
| Updater.updateBlockParents(); | |
| // Remove blocks from former ancestor loops. | |
| Updater.removeBlocksFromAncestors(); | |
| // Add direct subloops as children in their new parent loop. | |
| Updater.updateSubloopParents(); | |
| // Remove unloop from its parent loop. | |
| Loop *ParentLoop = Unloop->getParentLoop(); | |
| for (Loop::iterator I = ParentLoop->begin();; ++I) { | |
| assert(I != ParentLoop->end() && "Couldn't find loop"); | |
| if (*I == Unloop) { | |
| ParentLoop->removeChildLoop(I); | |
| break; | |
| } | |
| } | |
| } | |
| bool LoopInfo::wouldBeOutOfLoopUseRequiringLCSSA( | |
| const Value *V, const BasicBlock *ExitBB) const { | |
| if (V->getType()->isTokenLikeTy()) | |
| // We can't form PHIs of token-like type, so the definition of LCSSA | |
| // excludes values of that type. | |
| return false; | |
| const Instruction *I = dyn_cast<Instruction>(V); | |
| if (!I) | |
| return false; | |
| const Loop *L = getLoopFor(I->getParent()); | |
| if (!L) | |
| return false; | |
| if (L->contains(ExitBB)) | |
| // Could be an exit bb of a subloop and contained in defining loop | |
| return false; | |
| // We found a (new) out-of-loop use location, for a value defined in-loop. | |
| // (Note that because of LCSSA, we don't have to account for values defined | |
| // in sibling loops. Such values will have LCSSA phis of their own in the | |
| // common parent loop.) | |
| return true; | |
| } | |
| AnalysisKey LoopAnalysis::Key; | |
| LoopInfo LoopAnalysis::run(Function &F, FunctionAnalysisManager &AM) { | |
| // FIXME: Currently we create a LoopInfo from scratch for every function. | |
| // This may prove to be too wasteful due to deallocating and re-allocating | |
| // memory each time for the underlying map and vector datastructures. At some | |
| // point it may prove worthwhile to use a freelist and recycle LoopInfo | |
| // objects. I don't want to add that kind of complexity until the scope of | |
| // the problem is better understood. | |
| LoopInfo LI; | |
| // The dominator tree is needed only for an irreducible CFG. | |
| LI.analyze(&F, [&]() -> const DominatorTree & { | |
| return AM.getResult<DominatorTreeAnalysis>(F); | |
| }); | |
| return LI; | |
| } | |
| PreservedAnalyses LoopPrinterPass::run(Function &F, | |
| FunctionAnalysisManager &AM) { | |
| auto &LI = AM.getResult<LoopAnalysis>(F); | |
| OS << "Loop info for function '" << F.getName() << "':\n"; | |
| LI.print(OS); | |
| return PreservedAnalyses::all(); | |
| } | |
| void llvm::printLoop(const Loop &L, raw_ostream &OS, | |
| const std::string &Banner) { | |
| if (forcePrintModuleIR()) { | |
| // handling -print-module-scope | |
| OS << Banner << " (loop: "; | |
| L.getHeader()->printAsOperand(OS, false); | |
| OS << ")\n"; | |
| // printing whole module | |
| OS << *L.getHeader()->getModule(); | |
| return; | |
| } | |
| if (forcePrintFuncIR()) { | |
| // handling -print-loop-func-scope. | |
| // -print-module-scope overrides this. | |
| OS << Banner << " (loop: "; | |
| L.getHeader()->printAsOperand(OS, false); | |
| OS << ")\n"; | |
| // printing whole function. | |
| OS << *L.getHeader()->getParent(); | |
| return; | |
| } | |
| OS << Banner; | |
| auto *PreHeader = L.getLoopPreheader(); | |
| if (PreHeader) { | |
| OS << "\n; Preheader:"; | |
| PreHeader->print(OS); | |
| OS << "\n; Loop:"; | |
| } | |
| for (auto *Block : L.blocks()) | |
| if (Block) | |
| Block->print(OS); | |
| else | |
| OS << "Printing <null> block"; | |
| SmallVector<BasicBlock *, 8> ExitBlocks; | |
| L.getExitBlocks(ExitBlocks); | |
| if (!ExitBlocks.empty()) { | |
| OS << "\n; Exit blocks"; | |
| for (auto *Block : ExitBlocks) | |
| if (Block) | |
| Block->print(OS); | |
| else | |
| OS << "Printing <null> block"; | |
| } | |
| } | |
| MDNode *llvm::findOptionMDForLoopID(MDNode *LoopID, StringRef Name) { | |
| // No loop metadata node, no loop properties. | |
| if (!LoopID) | |
| return nullptr; | |
| // First operand should refer to the metadata node itself, for legacy reasons. | |
| assert(LoopID->getNumOperands() > 0 && "requires at least one operand"); | |
| assert(LoopID->getOperand(0) == LoopID && "invalid loop id"); | |
| // Iterate over the metdata node operands and look for MDString metadata. | |
| for (const MDOperand &MDO : llvm::drop_begin(LoopID->operands())) { | |
| MDNode *MD = dyn_cast<MDNode>(MDO); | |
| if (!MD || MD->getNumOperands() < 1) | |
| continue; | |
| MDString *S = dyn_cast<MDString>(MD->getOperand(0)); | |
| if (!S) | |
| continue; | |
| // Return the operand node if MDString holds expected metadata. | |
| if (Name == S->getString()) | |
| return MD; | |
| } | |
| // Loop property not found. | |
| return nullptr; | |
| } | |
| MDNode *llvm::findOptionMDForLoop(const Loop *TheLoop, StringRef Name) { | |
| return findOptionMDForLoopID(TheLoop->getLoopID(), Name); | |
| } | |
| /// Find string metadata for loop | |
| /// | |
| /// If it has a value (e.g. {"llvm.distribute", 1} return the value as an | |
| /// operand or null otherwise. If the string metadata is not found return | |
| /// Optional's not-a-value. | |
| std::optional<const MDOperand *> | |
| llvm::findStringMetadataForLoop(const Loop *TheLoop, StringRef Name) { | |
| MDNode *MD = findOptionMDForLoop(TheLoop, Name); | |
| if (!MD) | |
| return std::nullopt; | |
| switch (MD->getNumOperands()) { | |
| case 1: | |
| return nullptr; | |
| case 2: | |
| return &MD->getOperand(1); | |
| default: | |
| llvm_unreachable("loop metadata has 0 or 1 operand"); | |
| } | |
| } | |
| std::optional<bool> llvm::getOptionalBoolLoopAttribute(const Loop *TheLoop, | |
| StringRef Name) { | |
| MDNode *MD = findOptionMDForLoop(TheLoop, Name); | |
| if (!MD) | |
| return std::nullopt; | |
| switch (MD->getNumOperands()) { | |
| case 1: | |
| // When the value is absent it is interpreted as 'attribute set'. | |
| return true; | |
| case 2: | |
| if (ConstantInt *IntMD = | |
| mdconst::extract_or_null<ConstantInt>(MD->getOperand(1).get())) | |
| return IntMD->getZExtValue(); | |
| return true; | |
| } | |
| llvm_unreachable("unexpected number of options"); | |
| } | |
| bool llvm::getBooleanLoopAttribute(const Loop *TheLoop, StringRef Name) { | |
| return getOptionalBoolLoopAttribute(TheLoop, Name).value_or(false); | |
| } | |
| std::optional<int> llvm::getOptionalIntLoopAttribute(const Loop *TheLoop, | |
| StringRef Name) { | |
| const MDOperand *AttrMD = | |
| findStringMetadataForLoop(TheLoop, Name).value_or(nullptr); | |
| if (!AttrMD) | |
| return std::nullopt; | |
| ConstantInt *IntMD = mdconst::extract_or_null<ConstantInt>(AttrMD->get()); | |
| if (!IntMD) | |
| return std::nullopt; | |
| return IntMD->getSExtValue(); | |
| } | |
| int llvm::getIntLoopAttribute(const Loop *TheLoop, StringRef Name, | |
| int Default) { | |
| return getOptionalIntLoopAttribute(TheLoop, Name).value_or(Default); | |
| } | |
| CallBase *llvm::getLoopConvergenceHeart(const Loop *TheLoop) { | |
| BasicBlock *H = TheLoop->getHeader(); | |
| for (Instruction &II : *H) { | |
| if (auto *CB = dyn_cast<CallBase>(&II)) { | |
| if (!CB->isConvergent()) | |
| continue; | |
| // This is the heart if it uses a token defined outside the loop. The | |
| // verifier has already checked that only the loop intrinsic can use such | |
| // a token. | |
| if (auto *Token = CB->getConvergenceControlToken()) { | |
| auto *TokenDef = cast<Instruction>(Token); | |
| if (!TheLoop->contains(TokenDef->getParent())) | |
| return CB; | |
| } | |
| return nullptr; | |
| } | |
| } | |
| return nullptr; | |
| } | |
| bool llvm::isFinite(const Loop *L) { | |
| return L->getHeader()->getParent()->willReturn(); | |
| } | |
| static const char *LLVMLoopMustProgress = "llvm.loop.mustprogress"; | |
| bool llvm::hasMustProgress(const Loop *L) { | |
| return getBooleanLoopAttribute(L, LLVMLoopMustProgress); | |
| } | |
| bool llvm::isMustProgress(const Loop *L) { | |
| return L->getHeader()->getParent()->mustProgress() || hasMustProgress(L); | |
| } | |
| bool llvm::isValidAsAccessGroup(MDNode *Node) { | |
| return Node->getNumOperands() == 0 && Node->isDistinct(); | |
| } | |
| MDNode *llvm::makePostTransformationMetadata(LLVMContext &Context, | |
| MDNode *OrigLoopID, | |
| ArrayRef<StringRef> RemovePrefixes, | |
| ArrayRef<MDNode *> AddAttrs) { | |
| // First remove any existing loop metadata related to this transformation. | |
| SmallVector<Metadata *, 4> MDs; | |
| // Reserve first location for self reference to the LoopID metadata node. | |
| MDs.push_back(nullptr); | |
| // Remove metadata for the transformation that has been applied or that became | |
| // outdated. | |
| if (OrigLoopID) { | |
| for (const MDOperand &MDO : llvm::drop_begin(OrigLoopID->operands())) { | |
| bool IsVectorMetadata = false; | |
| Metadata *Op = MDO; | |
| if (MDNode *MD = dyn_cast<MDNode>(Op)) { | |
| const MDString *S = dyn_cast<MDString>(MD->getOperand(0)); | |
| if (S) | |
| IsVectorMetadata = | |
| llvm::any_of(RemovePrefixes, [S](StringRef Prefix) -> bool { | |
| return S->getString().starts_with(Prefix); | |
| }); | |
| } | |
| if (!IsVectorMetadata) | |
| MDs.push_back(Op); | |
| } | |
| } | |
| // Add metadata to avoid reapplying a transformation, such as | |
| // llvm.loop.unroll.disable and llvm.loop.isvectorized. | |
| MDs.append(AddAttrs.begin(), AddAttrs.end()); | |
| MDNode *NewLoopID = MDNode::getDistinct(Context, MDs); | |
| // Replace the temporary node with a self-reference. | |
| NewLoopID->replaceOperandWith(0, NewLoopID); | |
| return NewLoopID; | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // LoopInfo implementation | |
| // | |
| LoopInfoWrapperPass::LoopInfoWrapperPass() : FunctionPass(ID) {} | |
| char LoopInfoWrapperPass::ID = 0; | |
| INITIALIZE_PASS_BEGIN(LoopInfoWrapperPass, "loops", "Natural Loop Information", | |
| true, true) | |
| INITIALIZE_PASS_DEPENDENCY(DominatorTreeWrapperPass) | |
| INITIALIZE_PASS_END(LoopInfoWrapperPass, "loops", "Natural Loop Information", | |
| true, true) | |
| bool LoopInfoWrapperPass::runOnFunction(Function &) { | |
| releaseMemory(); | |
| LI.analyze(getAnalysis<DominatorTreeWrapperPass>().getDomTree()); | |
| return false; | |
| } | |
| void LoopInfoWrapperPass::verifyAnalysis() const { | |
| // LoopInfoWrapperPass is a FunctionPass, but verifying every loop in the | |
| // function each time verifyAnalysis is called is very expensive. The | |
| // -verify-loop-info option can enable this. In order to perform some | |
| // checking by default, LoopPass has been taught to call verifyLoop manually | |
| // during loop pass sequences. | |
| if (VerifyLoopInfo) | |
| LI.verify(); | |
| } | |
| void LoopInfoWrapperPass::getAnalysisUsage(AnalysisUsage &AU) const { | |
| AU.setPreservesAll(); | |
| AU.addRequiredTransitive<DominatorTreeWrapperPass>(); | |
| } | |
| void LoopInfoWrapperPass::print(raw_ostream &OS, const Module *) const { | |
| LI.print(OS); | |
| } | |
| PreservedAnalyses LoopVerifierPass::run(Function &F, | |
| FunctionAnalysisManager &AM) { | |
| LoopInfo &LI = AM.getResult<LoopAnalysis>(F); | |
| LI.verify(); | |
| return PreservedAnalyses::all(); | |
| } | |
| //===----------------------------------------------------------------------===// | |
| // LoopBlocksDFS implementation | |
| // | |
| /// Traverse the loop blocks and store the DFS result. | |
| /// Useful for clients that just want the final DFS result and don't need to | |
| /// visit blocks during the initial traversal. | |
| void LoopBlocksDFS::perform(const LoopInfo *LI) { | |
| LoopBlocksTraversal Traversal(*this, LI); | |
| for ([[maybe_unused]] BasicBlock *BB : Traversal) | |
| ; | |
| } |