| ## Test that yaml2obj automatically sets fields of the auxiliary file header |
| ## if not set explicitly. |
| |
| ## Case1: if text/data/bss/tdata/tbss/loader sections are set and corresponding |
| ## fields in the aux header are omitted, we use the derived values of |
| ## those sections to set corresponding fields. |
| # RUN: yaml2obj %s --docnum=1 -o %t1 |
| # RUN: llvm-readobj --auxiliary-header %t1 | FileCheck %s --check-prefix=CASE1 |
| |
| # CASE1: AuxiliaryHeader { |
| # CASE1-NEXT: Magic: 0x10B |
| # CASE1-NEXT: Version: 0x1 |
| # CASE1-NEXT: Size of .text section: 0x8 |
| # CASE1-NEXT: Size of .data section: 0x8 |
| # CASE1-NEXT: Size of .bss section: 0x8 |
| # CASE1-NEXT: Entry point address: 0x0 |
| # CASE1-NEXT: .text section start address: 0x4 |
| # CASE1-NEXT: .data section start address: 0x10 |
| # CASE1-NEXT: TOC anchor address: 0x0 |
| # CASE1-NEXT: Section number of entryPoint: 0 |
| # CASE1-NEXT: Section number of .text: 2 |
| # CASE1-NEXT: Section number of .data: 4 |
| # CASE1-NEXT: Section number of TOC: 0 |
| # CASE1-NEXT: Section number of loader data: 12 |
| # CASE1-NEXT: Section number of .bss: 6 |
| # CASE1-NEXT: Maxium alignment of .text: 0x0 |
| # CASE1-NEXT: Maxium alignment of .data: 0x0 |
| # CASE1-NEXT: Module type: 0x0 |
| # CASE1-NEXT: CPU type of objects: 0x0 |
| # CASE1-NEXT: (Reserved): 0x0 |
| # CASE1-NEXT: Maximum stack size: 0x0 |
| # CASE1-NEXT: Maximum data size: 0x0 |
| # CASE1-NEXT: Reserved for debugger: 0x0 |
| # CASE1-NEXT: Text page size: 0x0 |
| # CASE1-NEXT: Data page size: 0x0 |
| # CASE1-NEXT: Stack page size: 0x0 |
| # CASE1-NEXT: Flag: 0x0 |
| # CASE1-NEXT: Alignment of thread-local storage: 0x0 |
| # CASE1-NEXT: Section number for .tdata: 8 |
| # CASE1-NEXT: Section number for .tbss: 10 |
| # CASE1-NEXT: } |
| |
| --- !XCOFF |
| FileHeader: |
| MagicNumber: [[MAGIC=0x1DF]] |
| AuxiliaryHeader: |
| Magic: 0x10B |
| Sections: |
| - Flags: [ STYP_PAD ] |
| SectionData: "1234" |
| ## Set two sections with different contents for a given type to |
| ## demonstrate that the values in the aux header depend on the first one. |
| - Flags: [ STYP_TEXT ] |
| SectionData: "1234000000" |
| - Flags: [ STYP_TEXT ] |
| SectionData: "1234" |
| - Flags: [ STYP_DATA ] |
| SectionData: "1234000000" |
| - Flags: [ STYP_DATA ] |
| SectionData: "1234" |
| - Flags: [ STYP_BSS ] |
| SectionData: "1234000000" |
| - Flags: [ STYP_BSS ] |
| SectionData: "1234" |
| - Flags: [ STYP_TDATA ] |
| SectionData: "1234000000" |
| - Flags: [ STYP_TDATA ] |
| SectionData: "1234" |
| - Flags: [ STYP_TBSS ] |
| SectionData: "1234000000" |
| - Flags: [ STYP_TBSS ] |
| SectionData: "1234" |
| - Flags: [ STYP_LOADER ] |
| SectionData: "1234000000" |
| - Flags: [ STYP_LOADER ] |
| SectionData: "1234" |
| |
| ## Case2: same as case1, except producing 64-bit output. |
| # RUN: yaml2obj %s --docnum=1 -DMAGIC=0x1F7 -o %t2 |
| # RUN: llvm-readobj --auxiliary-header %t2 | FileCheck %s --check-prefix=CASE2 |
| |
| ## Case2: same as case1, except it is 64-bit. |
| # RUN: yaml2obj %s --docnum=1 -DMAGIC=0x1F7 -o %t2 |
| # RUN: llvm-readobj --auxiliary-header %t2 | FileCheck %s --check-prefix=CASE2 |
| |
| # CASE2: AuxiliaryHeader { |
| # CASE2-NEXT: Magic: 0x10B |
| # CASE2-NEXT: Version: 0x1 |
| # CASE2-NEXT: Reserved for debugger: 0x0 |
| # CASE2-NEXT: .text section start address: 0x2 |
| # CASE2-NEXT: .data section start address: 0xE |
| # CASE2-NEXT: TOC anchor address: 0x0 |
| # CASE2-NEXT: Section number of entryPoint: 0 |
| # CASE2-NEXT: Section number of .text: 2 |
| # CASE2-NEXT: Section number of .data: 4 |
| # CASE2-NEXT: Section number of TOC: 0 |
| # CASE2-NEXT: Section number of loader data: 12 |
| # CASE2-NEXT: Section number of .bss: 6 |
| # CASE2-NEXT: Maxium alignment of .text: 0x0 |
| # CASE2-NEXT: Maxium alignment of .data: 0x0 |
| # CASE2-NEXT: Module type: 0x0 |
| # CASE2-NEXT: CPU type of objects: 0x0 |
| # CASE2-NEXT: (Reserved): 0x0 |
| # CASE2-NEXT: Text page size: 0x0 |
| # CASE2-NEXT: Data page size: 0x0 |
| # CASE2-NEXT: Stack page size: 0x0 |
| # CASE2-NEXT: Flag: 0x0 |
| # CASE2-NEXT: Alignment of thread-local storage: 0x0 |
| # CASE2-NEXT: Size of .text section: 0x8 |
| # CASE2-NEXT: Size of .data section: 0x8 |
| # CASE2-NEXT: Size of .bss section: 0x8 |
| # CASE2-NEXT: Entry point address: 0x0 |
| # CASE2-NEXT: Maximum stack size: 0x0 |
| # CASE2-NEXT: Maximum data size: 0x0 |
| # CASE2-NEXT: Section number for .tdata: 8 |
| # CASE2-NEXT: Section number for .tbss: 10 |
| # CASE2-NEXT: Additional flags 64-bit XCOFF: 0x8000 |
| # CASE2-NEXT: } |
| |
| ## Case3: if all fields in the aux header are omitted and text/data/bss/tdata/tbss/loader |
| ## sections are not set, we set the fields using default values. |
| # RUN: yaml2obj %s --docnum=2 -o %t3 |
| # RUN: llvm-readobj --auxiliary-header %t3 | FileCheck %s --check-prefix=CASE3 |
| |
| # CASE3: AuxiliaryHeader { |
| # CASE3-NEXT: Magic: 0x1 |
| # CASE3-NEXT: Version: 0x1 |
| # CASE3-NEXT: Size of .text section: 0x0 |
| # CASE3-NEXT: Size of .data section: 0x0 |
| # CASE3-NEXT: Size of .bss section: 0x0 |
| # CASE3-NEXT: Entry point address: 0x0 |
| # CASE3-NEXT: .text section start address: 0x0 |
| # CASE3-NEXT: .data section start address: 0x0 |
| # CASE3-NEXT: TOC anchor address: 0x0 |
| # CASE3-NEXT: Section number of entryPoint: 0 |
| # CASE3-NEXT: Section number of .text: 0 |
| # CASE3-NEXT: Section number of .data: 0 |
| # CASE3-NEXT: Section number of TOC: 0 |
| # CASE3-NEXT: Section number of loader data: 0 |
| # CASE3-NEXT: Section number of .bss: 0 |
| # CASE3-NEXT: Maxium alignment of .text: 0x0 |
| # CASE3-NEXT: Maxium alignment of .data: 0x0 |
| # CASE3-NEXT: Module type: 0x0 |
| # CASE3-NEXT: CPU type of objects: 0x0 |
| # CASE3-NEXT: (Reserved): 0x0 |
| # CASE3-NEXT: Maximum stack size: 0x0 |
| # CASE3-NEXT: Maximum data size: 0x0 |
| # CASE3-NEXT: Reserved for debugger: 0x0 |
| # CASE3-NEXT: Text page size: 0x0 |
| # CASE3-NEXT: Data page size: 0x0 |
| # CASE3-NEXT: Stack page size: 0x0 |
| # CASE3-NEXT: Flag: 0x0 |
| # CASE3-NEXT: Alignment of thread-local storage: 0x0 |
| # CASE3-NEXT: Section number for .tdata: 0 |
| # CASE3-NEXT: Section number for .tbss: 0 |
| # CASE3-NEXT: } |
| |
| --- !XCOFF |
| FileHeader: |
| MagicNumber: [[MAGIC=0x1DF]] |
| AuxiliaryHeader: |
| |
| ## Case4: same as case3, except producing 64-bit output. |
| # RUN: yaml2obj %s --docnum=2 -DMAGIC=0x1F7 -o %t4 |
| # RUN: llvm-readobj --auxiliary-header %t4 | FileCheck %s --check-prefix=CASE4 |
| |
| # CASE4: AuxiliaryHeader { |
| # CASE4-NEXT: Magic: 0x1 |
| # CASE4-NEXT: Version: 0x1 |
| # CASE4-NEXT: Reserved for debugger: 0x0 |
| # CASE4-NEXT: .text section start address: 0x0 |
| # CASE4-NEXT: .data section start address: 0x0 |
| # CASE4-NEXT: TOC anchor address: 0x0 |
| # CASE4-NEXT: Section number of entryPoint: 0 |
| # CASE4-NEXT: Section number of .text: 0 |
| # CASE4-NEXT: Section number of .data: 0 |
| # CASE4-NEXT: Section number of TOC: 0 |
| # CASE4-NEXT: Section number of loader data: 0 |
| # CASE4-NEXT: Section number of .bss: 0 |
| # CASE4-NEXT: Maxium alignment of .text: 0x0 |
| # CASE4-NEXT: Maxium alignment of .data: 0x0 |
| # CASE4-NEXT: Module type: 0x0 |
| # CASE4-NEXT: CPU type of objects: 0x0 |
| # CASE4-NEXT: (Reserved): 0x0 |
| # CASE4-NEXT: Text page size: 0x0 |
| # CASE4-NEXT: Data page size: 0x0 |
| # CASE4-NEXT: Stack page size: 0x0 |
| # CASE4-NEXT: Flag: 0x0 |
| # CASE4-NEXT: Alignment of thread-local storage: 0x0 |
| # CASE4-NEXT: Size of .text section: 0x0 |
| # CASE4-NEXT: Size of .data section: 0x0 |
| # CASE4-NEXT: Size of .bss section: 0x0 |
| # CASE4-NEXT: Entry point address: 0x0 |
| # CASE4-NEXT: Maximum stack size: 0x0 |
| # CASE4-NEXT: Maximum data size: 0x0 |
| # CASE4-NEXT: Section number for .tdata: 0 |
| # CASE4-NEXT: Section number for .tbss: 0 |
| # CASE4-NEXT: Additional flags 64-bit XCOFF: 0x8000 |
| # CASE4-NEXT: } |