llvm/test/tools/yaml2obj/ELF/call-graph-profile-section.yaml

## Test how we create SHT_LLVM_CALL_GRAPH_PROFILE sections.

## Test that the content of SHT_LLVM_CALL_GRAPH_PROFILE sections
## for 32/64-bit little/big endian targets is correct.
# RUN: yaml2obj --docnum=1 -D BITS=64 -D ENCODE=LSB %s -o %t.le64
# RUN: llvm-readobj --cg-profile --sections --section-data %t.le64 | FileCheck %s --check-prefixes=BASIC,BASIC-LE
# RUN: yaml2obj --docnum=1 -D BITS=64 -D ENCODE=MSB %s -o %t.be64
# RUN: llvm-readobj --cg-profile --sections --section-data %t.be64 | FileCheck %s --check-prefixes=BASIC,BASIC-BE
# RUN: yaml2obj --docnum=1 -D BITS=32 -D ENCODE=LSB %s -o %t.le32
# RUN: llvm-readobj --cg-profile --sections --section-data %t.le32 | FileCheck %s --check-prefixes=BASIC,BASIC-LE
# RUN: yaml2obj --docnum=1 -D BITS=32 -D ENCODE=MSB %s -o %t.be32
# RUN: llvm-readobj --cg-profile --sections --section-data %t.be32 | FileCheck %s --check-prefixes=BASIC,BASIC-BE

# BASIC:        Name: .llvm.call-graph-profile
# BASIC-NEXT:   Type: SHT_LLVM_CALL_GRAPH_PROFILE
# BASIC-NEXT:   Flags [
# BASIC-NEXT:   ]
# BASIC-NEXT:   Address: 0x0
# BASIC-NEXT:   Offset:
# BASIC-NEXT:   Size: 16
## Check that we link SHT_LLVM_CALL_GRAPH_PROFILE section with .symtab by default.
# BASIC-NEXT:   Link: [[SYMTABNDX:.*]]
# BASIC-NEXT:   Info: 0
# BASIC-NEXT:   AddressAlignment: 0
## Check that the entry size is set to 16 by default.
# BASIC-NEXT:   EntrySize: 8
# BASIC-NEXT:   SectionData (
# BASIC-LE-NEXT:  0000: 59000000 00000000 62000000 00000000
# BASIC-BE-NEXT:  0000: 00000000 00000059 00000000 00000062
# BASIC-NEXT:   )
# BASIC-NEXT: }
# BASIC-NEXT: Section {
# BASIC-NEXT:  Index: [[SYMTABNDX]]
# BASIC-NEXT:  Name: .symtab

# BASIC:      CGProfile [
# BASIC-NEXT:   CGProfileEntry {
# BASIC-NEXT:     Weight: 89
# BASIC-NEXT:   }
# BASIC-NEXT:   CGProfileEntry {
# BASIC-NEXT:     Weight: 98
# BASIC-NEXT:   }
# BASIC-NEXT: ]

--- !ELF
FileHeader:
  Class: ELFCLASS[[BITS]]
  Data:  ELFDATA2[[ENCODE]]
  Type:  ET_DYN
Sections:
  - Name: .llvm.call-graph-profile
    Type: SHT_LLVM_CALL_GRAPH_PROFILE
    Entries:
      - Weight: 89
      - Weight: 98
Symbols:
  - Name: foo
  - Name: bar

## Check we can set arbitrary sh_link and sh_entsize values.
## Check we can specify none of "Content", "Entries", and "Size" tags.
# RUN: yaml2obj --docnum=2 %s -o %t.link
# RUN: llvm-readelf --sections %t.link | FileCheck %s --check-prefix=LINK

# LINK: [Nr] Name      Type                    Address          Off    Size   ES Flg Lk
# LINK: [ 1] .llvm.foo LLVM_CALL_GRAPH_PROFILE 0000000000000000 000040 000000 00     0
# LINK: [ 2] .llvm.bar LLVM_CALL_GRAPH_PROFILE 0000000000000000 000040 000000 ff     255

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_DYN
Sections:
  - Name:    .llvm.foo
    Type:    SHT_LLVM_CALL_GRAPH_PROFILE
    Link:    0x0
    EntSize: 0
  - Name:    .llvm.bar
    Type:    SHT_LLVM_CALL_GRAPH_PROFILE
    Link:    0xFF
    EntSize: 0xFF

## Check we can describe SHT_LLVM_CALL_GRAPH_PROFILE sections using the "Content" tag.
# RUN: yaml2obj --docnum=3 %s -o %t.content
# RUN: llvm-readobj --sections --section-data %t.content | FileCheck %s --check-prefix=CONTENT

# CONTENT:      Name: .llvm.call-graph-profile
# CONTENT:      SectionData (
# CONTENT-NEXT:   0000: 11223344 |
# CONTENT-NEXT: )

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_DYN
Sections:
  - Name:    .llvm.call-graph-profile
    Type:    SHT_LLVM_CALL_GRAPH_PROFILE
    Content: "11223344"

## Check we can use the "Content" key with the "Size" key when the size is greater
## than or equal to the content size.

# RUN: not yaml2obj --docnum=4 -DSIZE=1 -DCONTENT="'0011'" %s 2>&1 | \
# RUN:   FileCheck %s --check-prefix=CONTENT-SIZE-ERR

# CONTENT-SIZE-ERR: error: Section size must be greater than or equal to the content size

--- !ELF
FileHeader:
  Class: ELFCLASS64
  Data:  ELFDATA2LSB
  Type:  ET_DYN
Sections:
  - Name:    .llvm.foo
    Type:    SHT_LLVM_CALL_GRAPH_PROFILE
    Link:    0x1
    EntSize: 0x2
    Size:    [[SIZE=<none>]]
    Content: [[CONTENT=<none>]]
    Entries: [[ENTRIES=<none>]]

# RUN: yaml2obj --docnum=4 -DSIZE=2 -DCONTENT="'0011'" %s -o %t.cont.size.eq.o
# RUN: llvm-readobj --sections --section-data %t.cont.size.eq.o | \
# RUN:   FileCheck %s --check-prefix=CHECK-CONTENT -DDATA="0011"

# RUN: yaml2obj --docnum=4 -DSIZE=3 -DCONTENT="'0011'" %s -o %t.cont.size.gr.o
# RUN: llvm-readobj --sections --section-data %t.cont.size.gr.o | \
# RUN:   FileCheck %s --check-prefix=CHECK-CONTENT -DDATA="001100"

# CHECK-CONTENT:      Name: .llvm.foo
# CHECK-CONTENT-NEXT: Type: SHT_LLVM_CALL_GRAPH_PROFILE
# CHECK-CONTENT-NEXT: Flags [
# CHECK-CONTENT-NEXT: ]
# CHECK-CONTENT-NEXT: Address:
# CHECK-CONTENT-NEXT: Offset:
# CHECK-CONTENT-NEXT: Size:
# CHECK-CONTENT-NEXT: Link: 1
# CHECK-CONTENT-NEXT: Info:
# CHECK-CONTENT-NEXT: AddressAlignment:
# CHECK-CONTENT-NEXT: EntrySize: 2
# CHECK-CONTENT-NEXT: SectionData (
# CHECK-CONTENT-NEXT:   0000: [[DATA]] |
# CHECK-CONTENT-NEXT: )

## Check we can use the "Size" key alone to create the section.

# RUN: yaml2obj --docnum=4 -DSIZE=3 %s -o %t.size.o
# RUN: llvm-readobj --sections --section-data %t.size.o | \
# RUN:   FileCheck %s --check-prefix=CHECK-CONTENT -DDATA="000000"

## Check we can use the "Content" key alone to create the section.

# RUN: yaml2obj --docnum=4 -DCONTENT="'112233'" %s -o %t.content.o
# RUN: llvm-readobj --sections --section-data %t.content.o | \
# RUN:   FileCheck %s --check-prefix=CHECK-CONTENT -DDATA="112233"

## Check we can't use the "Entries" key together with the "Content" or "Size" keys.

# RUN: not yaml2obj --docnum=4 -DSIZE=0 -DENTRIES="[]" %s 2>&1 | \
# RUN:   FileCheck %s --check-prefix=ENTRIES-ERR
# RUN: not yaml2obj --docnum=4 -DCONTENT="'00'" -DENTRIES="[]" %s 2>&1 | \
# RUN:   FileCheck %s --check-prefix=ENTRIES-ERR

# ENTRIES-ERR: error: "Entries" cannot be used with "Content" or "Size"