| llvm_canonicalize_cmake_booleans( |
| BUILD_SHARED_LIBS |
| HAVE_OCAMLOPT |
| ENABLE_BACKTRACES |
| LLVM_ENABLE_DIA_SDK |
| LLVM_ENABLE_FFI |
| LLVM_ENABLE_THREADS |
| LLVM_ENABLE_CURL |
| LLVM_ENABLE_HTTPLIB |
| LLVM_ENABLE_ZLIB |
| LLVM_ENABLE_ZSTD |
| LLVM_ENABLE_LIBXML2 |
| LLVM_LINK_LLVM_DYLIB |
| LLVM_TOOL_LTO_BUILD |
| LLVM_USE_INTEL_JITEVENTS |
| LLVM_BUILD_EXAMPLES |
| LLVM_ENABLE_PLUGINS |
| LLVM_BYE_LINK_INTO_TOOLS |
| LLVM_EXAMPLEIRTRANSFORMS_LINK_INTO_TOOLS |
| LLVM_HAVE_TF_AOT |
| LLVM_HAVE_TFLITE |
| LLVM_INLINER_MODEL_AUTOGENERATED |
| LLVM_RAEVICT_MODEL_AUTOGENERATED |
| LLVM_ENABLE_EXPENSIVE_CHECKS |
| LLVM_ENABLE_REVERSE_ITERATION |
| LLVM_INCLUDE_DXIL_TESTS |
| LLVM_TOOL_LLVM_DRIVER_BUILD |
| LLVM_INCLUDE_SPIRV_SIMULATOR_TESTS |
| LLVM_INCLUDE_SPIRV_TOOLS_TESTS |
| LLVM_APPEND_VC_REV |
| LLVM_HAS_LOGF128 |
| LLVM_EXPERIMENTAL_KEY_INSTRUCTIONS |
| ) |
| |
| configure_lit_site_cfg( |
| ${CMAKE_CURRENT_SOURCE_DIR}/lit.site.cfg.py.in |
| ${CMAKE_CURRENT_BINARY_DIR}/lit.site.cfg.py |
| MAIN_CONFIG |
| ${CMAKE_CURRENT_SOURCE_DIR}/lit.cfg.py |
| PATHS |
| "CMAKE_OSX_SYSROOT" |
| "LLVM_SOURCE_DIR" |
| "LLVM_BINARY_DIR" |
| "LLVM_TOOLS_DIR" |
| "LLVM_LIBS_DIR" |
| "SHLIBDIR" |
| ) |
| configure_lit_site_cfg( |
| ${CMAKE_CURRENT_SOURCE_DIR}/Unit/lit.site.cfg.py.in |
| ${CMAKE_CURRENT_BINARY_DIR}/Unit/lit.site.cfg.py |
| MAIN_CONFIG |
| ${CMAKE_CURRENT_SOURCE_DIR}/Unit/lit.cfg.py |
| PATHS |
| "LLVM_SOURCE_DIR" |
| "LLVM_BINARY_DIR" |
| "LLVM_TOOLS_DIR" |
| "SHLIBDIR" |
| ) |
| |
| # Set the depends list as a variable so that it can grow conditionally. |
| # NOTE: Sync the substitutions in test/lit.cfg when adding to this list. |
| set(LLVM_TEST_DEPENDS |
| BugpointPasses |
| FileCheck |
| LLVMWindowsDriver |
| UnitTests |
| bugpoint |
| count |
| llc |
| lli |
| lli-child-target |
| llvm-addr2line |
| llvm-ar |
| llvm-as |
| llvm-bcanalyzer |
| llvm-bitcode-strip |
| llvm-c-test |
| llvm-cat |
| llvm-cfi-verify |
| llvm-cgdata |
| llvm-config |
| llvm-cov |
| llvm-ctxprof-util |
| llvm-cvtres |
| llvm-cxxdump |
| llvm-cxxfilt |
| llvm-cxxmap |
| llvm-debuginfo-analyzer |
| llvm-debuginfod-find |
| llvm-diff |
| llvm-dis |
| llvm-dlltool |
| dsymutil |
| llvm-dwarfdump |
| llvm-dwarfutil |
| llvm-dwp |
| llvm-exegesis |
| llvm-extract |
| llvm-gsymutil |
| llvm-isel-fuzzer |
| llvm-ifs |
| llvm-install-name-tool |
| llvm-jitlink |
| llvm-lib |
| llvm-libtool-darwin |
| llvm-link |
| llvm-lipo |
| llvm-locstats |
| llvm-lto2 |
| llvm-mc |
| llvm-mca |
| llvm-ml |
| llvm-ml64 |
| llvm-modextract |
| llvm-nm |
| llvm-objcopy |
| llvm-objdump |
| llvm-opt-fuzzer |
| llvm-opt-report |
| llvm-otool |
| llvm-pdbutil |
| llvm-profdata |
| llvm-profgen |
| llvm-ranlib |
| llvm-rc |
| llvm-readobj |
| llvm-readelf |
| llvm-reduce |
| llvm-remarkutil |
| llvm-rtdyld |
| llvm-sim |
| llvm-size |
| llvm-split |
| llvm-stress |
| llvm-strings |
| llvm-strip |
| llvm-symbolizer |
| llvm-tblgen |
| llvm-readtapi |
| llvm-tli-checker |
| llvm-undname |
| llvm-windres |
| llvm-xray |
| not |
| obj2yaml |
| opt |
| sancov |
| sanstats |
| split-file |
| verify-uselistorder |
| yaml-bench |
| yaml2obj |
| ) |
| |
| if(TARGET llvm-lto) |
| set(LLVM_TEST_DEPENDS ${LLVM_TEST_DEPENDS} llvm-lto) |
| endif() |
| |
| if(TARGET llvm-driver) |
| set(LLVM_TEST_DEPENDS ${LLVM_TEST_DEPENDS} llvm-driver) |
| endif() |
| |
| # If Intel JIT events are supported, depend on a tool that tests the listener. |
| if( LLVM_USE_INTEL_JITEVENTS ) |
| set(LLVM_TEST_DEPENDS ${LLVM_TEST_DEPENDS} llvm-jitlistener) |
| endif( LLVM_USE_INTEL_JITEVENTS ) |
| |
| if(TARGET LLVMgold) |
| set(LLVM_TEST_DEPENDS ${LLVM_TEST_DEPENDS} LLVMgold) |
| endif() |
| |
| if(TARGET LTO) |
| set(LLVM_TEST_DEPENDS ${LLVM_TEST_DEPENDS} LTO) |
| endif() |
| |
| if (TARGET llvm-mt) |
| list(APPEND LLVM_TEST_DEPENDS llvm-mt) |
| endif () |
| |
| if(LLVM_BUILD_EXAMPLES) |
| list(APPEND LLVM_TEST_DEPENDS |
| Kaleidoscope-Ch3 |
| Kaleidoscope-Ch4 |
| Kaleidoscope-Ch5 |
| Kaleidoscope-Ch6 |
| Kaleidoscope-Ch7 |
| LLJITWithThinLTOSummaries |
| OrcV2CBindingsBasicUsage |
| OrcV2CBindingsAddObjectFile |
| OrcV2CBindingsRemovableCode |
| OrcV2CBindingsLazy |
| OrcV2CBindingsVeryLazy |
| ) |
| if(CMAKE_HOST_UNIX) |
| list(APPEND LLVM_TEST_DEPENDS |
| LLJITWithRemoteDebugging |
| ) |
| endif() |
| if (NOT WIN32) |
| list(APPEND LLVM_TEST_DEPENDS |
| Bye |
| ExampleIRTransforms |
| ) |
| endif() |
| endif() |
| |
| if(TARGET ocaml_llvm) |
| # Clear all non-OCaml cross-target dependencies when building out-of-tree. |
| if(LLVM_OCAML_OUT_OF_TREE) |
| set(LLVM_TEST_DEPENDS) |
| endif() |
| |
| set(LLVM_TEST_DEPENDS ${LLVM_TEST_DEPENDS} |
| ocaml_llvm |
| ocaml_llvm_all_backends |
| ocaml_llvm_analysis |
| ocaml_llvm_bitreader |
| ocaml_llvm_bitwriter |
| ocaml_llvm_debuginfo |
| ocaml_llvm_executionengine |
| ocaml_llvm_irreader |
| ocaml_llvm_linker |
| ocaml_llvm_passbuilder |
| ocaml_llvm_target |
| ocaml_llvm_transform_utils |
| ) |
| endif() |
| |
| if (LLVM_INCLUDE_DXIL_TESTS) |
| list(APPEND LLVM_TEST_DEPENDS dxil-dis) |
| endif() |
| |
| if(LLVM_ENABLE_HTTPLIB) |
| list(APPEND LLVM_TEST_DEPENDS llvm-debuginfod) |
| endif() |
| |
| if (LLVM_INCLUDE_SPIRV_TOOLS_TESTS) |
| list(APPEND LLVM_TEST_DEPENDS spirv-dis) |
| list(APPEND LLVM_TEST_DEPENDS spirv-val) |
| list(APPEND LLVM_TEST_DEPENDS spirv-as) |
| list(APPEND LLVM_TEST_DEPENDS spirv-link) |
| endif() |
| |
| add_custom_target(llvm-test-depends DEPENDS ${LLVM_TEST_DEPENDS}) |
| set_target_properties(llvm-test-depends PROPERTIES FOLDER "LLVM/Tests") |
| |
| if(LLVM_BUILD_TOOLS) |
| set(exclude_from_check_all "") |
| else() |
| set(exclude_from_check_all "EXCLUDE_FROM_CHECK_ALL") |
| endif() |
| |
| add_lit_testsuite(check-llvm "Running the LLVM regression tests" |
| ${CMAKE_CURRENT_BINARY_DIR} |
| ${exclude_from_check_all} |
| DEPENDS ${LLVM_TEST_DEPENDS} |
| ) |
| set_target_properties(check-llvm PROPERTIES FOLDER "LLVM/Tests") |
| |
| add_lit_testsuites(LLVM ${CMAKE_CURRENT_SOURCE_DIR} |
| ${exclude_from_check_all} |
| DEPENDS ${LLVM_TEST_DEPENDS} |
| FOLDER "Tests/Subdirectories" |
| ) |
| |
| # Setup an alias for 'check-all'. |
| add_custom_target(check) |
| add_dependencies(check check-all) |
| set_target_properties(check PROPERTIES FOLDER "LLVM/Tests") |
