| ------------------------------------------------------------------------------ |
| -- -- |
| -- GNAT COMPILER COMPONENTS -- |
| -- -- |
| -- W I D E C H A R -- |
| -- -- |
| -- S p e c -- |
| -- -- |
| -- Copyright (C) 1992-2005 Free Software Foundation, Inc. -- |
| -- -- |
| -- GNAT is free software; you can redistribute it and/or modify it under -- |
| -- terms of the GNU General Public License as published by the Free Soft- -- |
| -- ware Foundation; either version 2, or (at your option) any later ver- -- |
| -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- |
| -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- |
| -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- |
| -- for more details. You should have received a copy of the GNU General -- |
| -- Public License distributed with GNAT; see file COPYING. If not, write -- |
| -- to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, -- |
| -- MA 02111-1307, USA. -- |
| -- -- |
| -- As a special exception, if other files instantiate generics from this -- |
| -- unit, or you link this unit with other files to produce an executable, -- |
| -- this unit does not by itself cause the resulting executable to be -- |
| -- covered by the GNU General Public License. This exception does not -- |
| -- however invalidate any other reasons why the executable file might be -- |
| -- covered by the GNU Public License. -- |
| -- -- |
| -- GNAT was originally developed by the GNAT team at New York University. -- |
| -- Extensive contributions were provided by Ada Core Technologies Inc. -- |
| -- -- |
| ------------------------------------------------------------------------------ |
| |
| -- Subprograms for manipulation of wide character sequences. Note that in |
| -- this package, wide character and wide wide character are not distinguished |
| -- since this package is basically concerned with syntactic notions, and it |
| -- deals with Char_Code values, rather than values of actual Ada types. |
| |
| with Types; use Types; |
| |
| package Widechar is |
| |
| function Length_Wide return Nat; |
| -- Returns the maximum length in characters for the escape sequence that |
| -- is used to encode wide character literals outside the ASCII range. Used |
| -- only in the implementation of the attribute Width for Wide_Character |
| -- and Wide_Wide_Character. |
| |
| procedure Scan_Wide |
| (S : Source_Buffer_Ptr; |
| P : in out Source_Ptr; |
| C : out Char_Code; |
| Err : out Boolean); |
| -- On entry S (P) points to the first character in the source text for |
| -- a wide character (i.e. to an ESC character, a left bracket, or an |
| -- upper half character, depending on the representation method). A |
| -- single wide character is scanned. If no error is found, the value |
| -- stored in C is the code for this wide character, P is updated past |
| -- the sequence and Err is set to False. If an error is found, then |
| -- P points to the improper character, C is undefined, and Err is |
| -- set to True. |
| |
| procedure Set_Wide |
| (C : Char_Code; |
| S : in out String; |
| P : in out Natural); |
| -- The escape sequence (including any leading ESC character) for the |
| -- given character code is stored starting at S (P + 1), and on return |
| -- P points to the last stored character (i.e. P is the count of stored |
| -- characters on entry and exit, and the escape sequence is appended to |
| -- the end of the stored string). The character code C represents a code |
| -- originally constructed by Scan_Wide, so it is known to be in a range |
| -- that is appropriate for the encoding method in use. |
| |
| procedure Skip_Wide (S : String; P : in out Natural); |
| -- On entry, S (P) points to an ESC character for a wide character escape |
| -- sequence or to an upper half character if the encoding method uses the |
| -- upper bit, or to a left bracket if the brackets encoding method is in |
| -- use. On exit, P is bumped past the wide character sequence. No error |
| -- checking is done, since this is only used on escape sequences generated |
| -- by Set_Wide, which are known to be correct. |
| |
| procedure Skip_Wide (S : Source_Buffer_Ptr; P : in out Source_Ptr); |
| -- Similar to the above procedure, but operates on a source buffer |
| -- instead of a string, with P being a Source_Ptr referencing the |
| -- contents of the source buffer. |
| |
| function Is_Start_Of_Wide_Char |
| (S : Source_Buffer_Ptr; |
| P : Source_Ptr) return Boolean; |
| -- Determines if S (P) is the start of a wide character sequence |
| |
| function Is_UTF_32_Letter (U : Char_Code) return Boolean; |
| pragma Inline (Is_UTF_32_Letter); |
| -- Returns true iff U is a letter that can be used to start an identifier. |
| -- This means that it is in one of the following categories: |
| -- Letter, Uppercase (Lu) |
| -- Letter, Lowercase (Ll) |
| -- Letter, Titlecase (Lt) |
| -- Letter, Modifier (Lm) |
| -- Letter, Other (Lo) |
| -- Number, Letter (Nl) |
| |
| function Is_UTF_32_Digit (U : Char_Code) return Boolean; |
| pragma Inline (Is_UTF_32_Digit); |
| -- Returns true iff U is a digit that can be used to extend an identifer, |
| -- which means it is in one of the following categories: |
| -- Number, Decimal_Digit (Nd) |
| |
| function Is_UTF_32_Line_Terminator (U : Char_Code) return Boolean; |
| pragma Inline (Is_UTF_32_Line_Terminator); |
| -- Returns true iff U is an allowed line terminator for source programs, |
| -- which means it is in one of the following categories: |
| -- Separator, Line (Zl) |
| -- Separator, Paragraph (Zp) |
| -- or that it is a conventional line terminator (CR, LF, VT, FF) |
| |
| function Is_UTF_32_Mark (U : Char_Code) return Boolean; |
| pragma Inline (Is_UTF_32_Mark); |
| -- Returns true iff U is a mark character which can be used to extend |
| -- an identifier. This means it is in one of the following categories: |
| -- Mark, Non-Spacing (Mn) |
| -- Mark, Spacing Combining (Mc) |
| |
| function Is_UTF_32_Other (U : Char_Code) return Boolean; |
| pragma Inline (Is_UTF_32_Other); |
| -- Returns true iff U is an other format character, which means that it |
| -- can be used to extend an identifier, but is ignored for the purposes of |
| -- matching of identiers. This means that it is in one of the following |
| -- categories: |
| -- Other, Format (Cf) |
| |
| function Is_UTF_32_Punctuation (U : Char_Code) return Boolean; |
| pragma Inline (Is_UTF_32_Punctuation); |
| -- Returns true iff U is a punctuation character that can be used to |
| -- separate pices of an identifier. This means that it is in one of the |
| -- following categories: |
| -- Punctuation, Connector (Pc) |
| |
| function Is_UTF_32_Space (U : Char_Code) return Boolean; |
| pragma Inline (Is_UTF_32_Space); |
| -- Returns true iff U is considered a space to be ignored, which means |
| -- that it is in one of the following categories: |
| -- Separator, Space (Zs) |
| |
| function Is_UTF_32_Non_Graphic (U : Char_Code) return Boolean; |
| pragma Inline (Is_UTF_32_Non_Graphic); |
| -- Returns true iff U is considered to be a non-graphic character, |
| -- which means that it is in one of the following categories: |
| -- Other, Control (Cc) |
| -- Other, Private Use (Co) |
| -- Other, Surrogate (Cs) |
| -- Other, Format (Cf) |
| -- Separator, Line (Zl) |
| -- Separator, Paragraph (Zp) |
| -- |
| -- Note that the Ada category format effector is subsumed by the above |
| -- list of Unicode categories. |
| |
| function UTF_32_To_Upper_Case (U : Char_Code) return Char_Code; |
| pragma Inline (UTF_32_To_Upper_Case); |
| -- If U represents a lower case letter, returns the corresponding upper |
| -- case letter, otherwise U is returned unchanged. The folding is locale |
| -- independent as defined by documents referenced in the note in section |
| -- 1 of ISO/IEC 10646:2003 |
| |
| end Widechar; |