| -- C490002.A |
| -- |
| -- Grant of Unlimited Rights |
| -- |
| -- Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687, |
| -- F08630-91-C-0015, and DCA100-97-D-0025, the U.S. Government obtained |
| -- unlimited rights in the software and documentation contained herein. |
| -- Unlimited rights are defined in DFAR 252.227-7013(a)(19). By making |
| -- this public release, the Government intends to confer upon all |
| -- recipients unlimited rights equal to those held by the Government. |
| -- These rights include rights to use, duplicate, release or disclose the |
| -- released technical data and computer software in whole or in part, in |
| -- any manner and for any purpose whatsoever, and to have or permit others |
| -- to do so. |
| -- |
| -- DISCLAIMER |
| -- |
| -- ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR |
| -- DISCLOSED ARE AS IS. THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED |
| -- WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE |
| -- SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE |
| -- OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A |
| -- PARTICULAR PURPOSE OF SAID MATERIAL. |
| --* |
| -- |
| -- OBJECTIVE: |
| -- Check that, for a real static expression that is not part of a larger |
| -- static expression, and whose expected type T is an ordinary fixed |
| -- point type that is not a descendant of a formal scalar type, the value |
| -- is rounded to the nearest integral multiple of the small of T if |
| -- T'Machine_Rounds is true, and is truncated otherwise. Check that if |
| -- rounding is performed, and the value is exactly halfway between two |
| -- multiples of the small, one of the two multiples of small is used. |
| -- |
| -- TEST DESCRIPTION: |
| -- The test obtains an integral multiple M1 of the small of an ordinary |
| -- fixed point subtype S by dividing a real literal by S'Small, and then |
| -- truncating the result using 'Truncation. It then obtains an adjacent |
| -- multiple M2 of the small by using S'Succ (or S'Pred). It then |
| -- constructs values which lie between these multiples: one (A) which is |
| -- closer to M1, one (B) which is exactly halfway between M1 and M2, and |
| -- one (C) which is closer to M2. This is done for both positive and |
| -- negative multiples of the small. |
| -- |
| -- Let M1 be closer to zero than M2. Then if S'Machine_Rounds is true, |
| -- C must be rounded to M2, A must be rounded to M1, and B must be rounded |
| -- to either M1 or M2. If S'Machine_Rounds is false, all the values must |
| -- be truncated to M1. |
| -- |
| -- A, B, and C are constructed using the following static expressions: |
| -- |
| -- A: constant S := M1 + (M2 - M1)/Z; -- Z slightly more than 2.0. |
| -- B: constant S := M1 + (M2 - M1)/Z; -- Z equals 2.0. |
| -- C: constant S := M1 + (M2 - M1)/Z; -- Z slightly less than 2.0. |
| -- |
| -- Since these are static expressions, they must be evaluated exactly, |
| -- and no rounding may occur until the final result is calculated. |
| -- |
| -- The checks for equality between the members of (A, B, C) and (M1, M2) |
| -- are performed at run-time within the body of a subprogram. |
| -- |
| -- The test performs additional checks that the rounding performed on |
| -- real literals is consistent for ordinary fixed point subtypes. A |
| -- named number (initialized with a literal) is assigned to a constant of |
| -- a fixed point subtype S. The same literal is then passed to a |
| -- subprogram, along with the constant, and an equality check is |
| -- performed within the body of the subprogram. |
| -- |
| -- |
| -- CHANGE HISTORY: |
| -- 26 Sep 95 SAIC Initial prerelease version. |
| -- |
| --! |
| |
| package C490002_0 is |
| |
| type My_Fix is delta 0.0625 range -1000.0 .. 1000.0; |
| |
| Small : constant := My_Fix'Small; -- Named number. |
| |
| procedure Fixed_Subtest (A, B: in My_Fix; Msg: in String); |
| |
| procedure Fixed_Subtest (A, B, C: in My_Fix; Msg: in String); |
| |
| |
| -- |
| -- Positive cases: |
| -- |
| |
| -- |----|-------------|-----------------|-------------------|-----------| |
| -- | | | | | | |
| -- 0 P_M1 Less_Pos_Than_Half Pos_Exactly_Half More_Pos_Than_Half P_M2 |
| |
| |
| Positive_Real : constant := 0.11433; -- Named number. |
| Pos_Multiplier : constant := Float'Truncation(Positive_Real/Small); |
| |
| -- Pos_Multiplier is the number of integral multiples of small contained |
| -- in Positive_Real. P_M1 is thus the largest integral multiple of |
| -- small less than or equal to Positive_Real. Note that since Positive_Real |
| -- is a named number and not a fixed point object, P_M1 is generated |
| -- without assuming that rounding is performed correctly for fixed point |
| -- subtypes. |
| |
| Positive_Fixed : constant My_Fix := Positive_Real; |
| |
| P_M1 : constant My_Fix := Pos_Multiplier * Small; |
| P_M2 : constant My_Fix := My_Fix'Succ(P_M1); |
| |
| -- P_M1 and P_M2 are adjacent multiples of the small of My_Fix. Note that |
| -- 0.11433 either equals P_M1 (if it is an integral multiple of the small) |
| -- or lies between P_M1 and P_M2 (since truncation was forced in |
| -- generating Pos_Multiplier). It is not certain, however, exactly where |
| -- it lies between them (halfway, less than halfway, more than halfway). |
| -- This fact is irrelevant to the test. |
| |
| |
| -- The following entities are used to verify that rounding is performed |
| -- according to the value of 'Machine_Rounds. If language rules are |
| -- obeyed, the intermediate expressions in the following static |
| -- initialization expressions will not be rounded; all calculations will |
| -- be performed exactly. The final result, however, will be rounded to |
| -- an integral multiple of the small (either P_M1 or P_M2, depending on the |
| -- value of My_Fix'Machine_Rounds). Thus, the value of each constant below |
| -- will equal that of P_M1 or P_M2. |
| |
| Less_Pos_Than_Half : constant My_Fix := P_M1 + ((P_M2 - P_M1)/2.050); |
| Pos_Exactly_Half : constant My_Fix := P_M1 + ((P_M2 - P_M1)/2.000); |
| More_Pos_Than_Half : constant My_Fix := P_M1 + ((P_M2 - P_M1)/1.975); |
| |
| |
| -- |
| -- Negative cases: |
| -- |
| |
| -- -|-------------|-----------------|-------------------|-----------|----| |
| -- | | | | | | |
| -- N_M2 More_Neg_Than_Half Neg_Exactly_Half Less_Neg_Than_Half N_M1 0 |
| |
| |
| -- The descriptions for the positive cases above apply to the negative |
| -- cases below as well. Note that, for N_M2, 'Pred is used rather than |
| -- 'Succ. Thus, N_M2 is further from 0.0 (i.e. more negative) than N_M1. |
| |
| Negative_Real : constant := -467.13988; -- Named number. |
| Neg_Multiplier : constant := Float'Truncation(Negative_Real/Small); |
| |
| Negative_Fixed : constant My_Fix := Negative_Real; |
| |
| N_M1 : constant My_Fix := Neg_Multiplier * Small; |
| N_M2 : constant My_Fix := My_Fix'Pred(N_M1); |
| |
| More_Neg_Than_Half : constant My_Fix := N_M1 + ((N_M2 - N_M1)/1.980); |
| Neg_Exactly_Half : constant My_Fix := N_M1 + ((N_M2 - N_M1)/2.000); |
| Less_Neg_Than_Half : constant My_Fix := N_M1 + ((N_M2 - N_M1)/2.033); |
| |
| end C490002_0; |
| |
| |
| --==================================================================-- |
| |
| |
| with TCTouch; |
| package body C490002_0 is |
| |
| procedure Fixed_Subtest (A, B: in My_Fix; Msg: in String) is |
| begin |
| TCTouch.Assert (A = B, Msg); |
| end Fixed_Subtest; |
| |
| procedure Fixed_Subtest (A, B, C: in My_Fix; Msg: in String) is |
| begin |
| TCTouch.Assert (A = B or A = C, Msg); |
| end Fixed_Subtest; |
| |
| end C490002_0; |
| |
| |
| --==================================================================-- |
| |
| |
| with C490002_0; -- Fixed point support. |
| use C490002_0; |
| |
| with Report; |
| procedure C490002 is |
| begin |
| Report.Test ("C490002", "Rounding of real static expressions: " & |
| "ordinary fixed point subtypes"); |
| |
| |
| -- Literal cases: If the named numbers used to initialize Positive_Fixed |
| -- and Negative_Fixed are rounded to an integral multiple of the small |
| -- prior to assignment (as expected), then Positive_Fixed and |
| -- Negative_Fixed are already integral multiples of the small, and |
| -- equal either P_M1 or P_M2 (resp., N_M1 or N_M2). An equality check |
| -- can determine in which direction rounding occurred. For example: |
| -- |
| -- if (Positive_Fixed = P_M1) then -- Rounding was toward 0.0. |
| -- |
| -- Check here that the rounding direction is consistent for literals: |
| |
| if (Positive_Fixed = P_M1) then |
| Fixed_Subtest (0.11433, P_M1, "Positive Fixed: literal"); |
| else |
| Fixed_Subtest (0.11433, P_M2, "Positive Fixed: literal"); |
| end if; |
| |
| if (Negative_Fixed = N_M1) then |
| Fixed_Subtest (-467.13988, N_M1, "Negative Fixed: literal"); |
| else |
| Fixed_Subtest (-467.13988, N_M2, "Negative Fixed: literal"); |
| end if; |
| |
| |
| -- Now check that rounding is performed correctly for values between |
| -- multiples of the small, according to the value of 'Machine_Rounds: |
| |
| if My_Fix'Machine_Rounds then |
| Fixed_Subtest (Pos_Exactly_Half, P_M1, P_M2, "Positive Fixed: = half"); |
| Fixed_Subtest (More_Pos_Than_Half, P_M2, "Positive Fixed: > half"); |
| Fixed_Subtest (Less_Pos_Than_Half, P_M1, "Positive Fixed: < half"); |
| |
| Fixed_Subtest (Neg_Exactly_Half, N_M1, N_M2, "Negative Fixed: = half"); |
| Fixed_Subtest (More_Neg_Than_Half, N_M2, "Negative Fixed: > half"); |
| Fixed_Subtest (Less_Neg_Than_Half, N_M1, "Negative Fixed: < half"); |
| else |
| Fixed_Subtest (Pos_Exactly_Half, P_M1, "Positive Fixed: = half"); |
| Fixed_Subtest (More_Pos_Than_Half, P_M1, "Positive Fixed: > half"); |
| Fixed_Subtest (Less_Pos_Than_Half, P_M1, "Positive Fixed: < half"); |
| |
| Fixed_Subtest (Neg_Exactly_Half, N_M1, "Negative Fixed: = half"); |
| Fixed_Subtest (More_Neg_Than_Half, N_M1, "Negative Fixed: > half"); |
| Fixed_Subtest (Less_Neg_Than_Half, N_M1, "Negative Fixed: < half"); |
| end if; |
| |
| |
| Report.Result; |
| end C490002; |