| -- CXB4007.A |
| -- |
| -- Grant of Unlimited Rights |
| -- |
| -- Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687, |
| -- F08630-91-C-0015, and DCA100-97-D-0025, the U.S. Government obtained |
| -- unlimited rights in the software and documentation contained herein. |
| -- Unlimited rights are defined in DFAR 252.227-7013(a)(19). By making |
| -- this public release, the Government intends to confer upon all |
| -- recipients unlimited rights equal to those held by the Government. |
| -- These rights include rights to use, duplicate, release or disclose the |
| -- released technical data and computer software in whole or in part, in |
| -- any manner and for any purpose whatsoever, and to have or permit others |
| -- to do so. |
| -- |
| -- DISCLAIMER |
| -- |
| -- ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR |
| -- DISCLOSED ARE AS IS. THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED |
| -- WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE |
| -- SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE |
| -- OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A |
| -- PARTICULAR PURPOSE OF SAID MATERIAL. |
| --* |
| -- |
| -- OBJECTIVE: |
| -- Check that the function Valid with Byte_Array and Binary_Format |
| -- parameters returns True if the Byte_Array parameter corresponds |
| -- to any value inside the range of type Num. |
| -- Check that function Valid returns False if the Byte_Array parameter |
| -- corresponds to a value outside the range of Num. |
| -- |
| -- Check that function Length with Binary_Format parameter will return |
| -- the minimum length of a Byte_Array value required to hold any value |
| -- of decimal type Num. |
| -- |
| -- Check that function To_Decimal with Byte_Array and Binary_Format |
| -- parameters will return a decimal type value that corresponds to |
| -- parameter Item (of type Byte_Array) under the specified Format. |
| -- |
| -- Check that Conversion_Error is propagated by function To_Decimal if |
| -- the Byte_Array parameter Item represents a decimal value outside the |
| -- range of decimal type Num. |
| -- |
| -- Check that function To_Binary will produce a Byte_Array result that |
| -- corresponds to the decimal type parameter Item, under the specified |
| -- Binary_Format. |
| -- |
| -- TEST DESCRIPTION: |
| -- This test uses several instantiations of generic package |
| -- Decimal_Conversions to provide appropriate test material. |
| -- This test uses the function To_Binary to create all Byte_Array |
| -- parameter values used in calls to functions Valid and To_Decimal. |
| -- The function Valid is tested with parameters to provide both |
| -- valid and invalid expected results. This test also checks that |
| -- Function To_Decimal produces expected results in cases where each |
| -- of the three predefined Binary_Format constants are used in the |
| -- function calls. In addition, the prescribed propagation of |
| -- Conversion_Error by function To_Decimal is verified. |
| -- |
| -- APPLICABILITY CRITERIA: |
| -- This test is applicable to all implementations that provide |
| -- package Interfaces.COBOL. If an implementation provides |
| -- package Interfaces.COBOL, this test must compile, execute, and |
| -- report "PASSED". |
| -- |
| -- |
| -- CHANGE HISTORY: |
| -- 14 Feb 96 SAIC Initial release for 2.1. |
| -- 30 May 96 SAIC Incorporated reviewer comments for ACVC 2.1. |
| -- 27 Oct 96 SAIC Incorporated reviewer comments. |
| -- 05 JAN 98 EDS Remove incorrect subtest. |
| --! |
| |
| with Report; |
| with Ada.Exceptions; |
| with Interfaces.COBOL; -- N/A => ERROR |
| |
| procedure CXB4007 is |
| begin |
| |
| Report.Test ("CXB4007", "Check that functions Valid, Length, To_Decimal " & |
| "and To_Binary specific to Byte_Array and " & |
| "Binary_Format parameters produce correct results"); |
| |
| Test_Block: |
| declare |
| |
| use Interfaces.COBOL; |
| use Ada.Exceptions; |
| use type Interfaces.COBOL.Numeric; |
| |
| type Decimal_Type_1 is delta 0.1 digits 6; |
| type Decimal_Type_2 is delta 0.01 digits 8; |
| type Decimal_Type_3 is delta 0.001 digits 10; |
| type Decimal_Type_4 is delta 0.0001 digits 12; |
| |
| package Pack_1 is new Decimal_Conversions(Decimal_Type_1); |
| package Pack_2 is new Decimal_Conversions(Decimal_Type_2); |
| package Pack_3 is new Decimal_Conversions(Decimal_Type_3); |
| package Pack_4 is new Decimal_Conversions(Decimal_Type_4); |
| |
| TC_Dec_1 : Decimal_Type_1 := 12345.6; |
| TC_Dec_2 : Decimal_Type_2 := 123456.78; |
| TC_Dec_3 : Decimal_Type_3 := 1234567.890; |
| TC_Dec_4 : Decimal_Type_4 := 12345678.9012; |
| TC_Min_Length : Natural := 1; |
| TC_Max_Length : Natural := 16; |
| TC_Valid : Boolean := False; |
| |
| begin |
| |
| -- Check that the function Valid with Byte_Array and Binary_Format |
| -- parameters returns True if the Byte_Array parameter corresponds to |
| -- any value inside the range of type Num. |
| |
| if not Pack_1.Valid(Item => Pack_1.To_Binary(TC_Dec_1, |
| High_Order_First), |
| Format => High_Order_First) or |
| not Pack_1.Valid(Pack_1.To_Binary(0.0, Low_Order_First), |
| Format => Low_Order_First) |
| then |
| Report.Failed("Incorrect result from function Valid, using " & |
| "parameters that should return a positive result - 1"); |
| end if; |
| |
| TC_Valid := (Pack_2.Valid(Pack_2.To_Binary(TC_Dec_2, High_Order_First), |
| Format => High_Order_First) and |
| Pack_2.Valid(Pack_2.To_Binary(0.01, Low_Order_First), |
| Format => Low_Order_First)); |
| if not TC_Valid then |
| Report.Failed("Incorrect result from function Valid, using " & |
| "parameters that should return a positive result - 2"); |
| end if; |
| |
| if not Pack_3.Valid(Item => Pack_3.To_Binary(TC_Dec_3, |
| Low_Order_First), |
| Format => Low_Order_First) or |
| not Pack_3.Valid(Pack_3.To_Binary(0.001, High_Order_First), |
| Format => High_Order_First) or |
| not Pack_3.Valid(Pack_3.To_Binary(123.456, Native_Binary), |
| Native_Binary) |
| then |
| Report.Failed("Incorrect result from function Valid, using " & |
| "parameters that should return a positive result - 3"); |
| end if; |
| |
| |
| -- Check that function Valid returns False if the Byte_Array parameter |
| -- corresponds to a value outside the range of Num. |
| -- Note: use a Byte_Array value Item created by an instantiation of |
| -- To_Binary with a larger Num type as the generic formal. |
| |
| if Pack_1.Valid(Item => Pack_2.To_Binary(TC_Dec_2, Low_Order_First), |
| Format => Low_Order_First) or |
| Pack_2.Valid(Pack_3.To_Binary(TC_Dec_3, High_Order_First), |
| Format => High_Order_First) or |
| Pack_3.Valid(Pack_4.To_Binary(TC_Dec_4, Native_Binary), |
| Native_Binary) |
| then |
| Report.Failed("Incorrect result from function Valid, using " & |
| "parameters that should return a negative result"); |
| end if; |
| |
| |
| -- Check that function Length with Binary_Format parameter will return |
| -- the minimum length of a Byte_Array value required to hold any value |
| -- of decimal type Num. |
| |
| if not (Pack_1.Length(Native_Binary) >= TC_Min_Length and |
| Pack_1.Length(Low_Order_First) <= TC_Max_Length and |
| Pack_2.Length(High_Order_First) >= TC_Min_Length and |
| Pack_2.Length(Native_Binary) <= TC_Max_Length and |
| Pack_3.Length(Low_Order_First) >= TC_Min_Length and |
| Pack_3.Length(High_Order_First) <= TC_Max_Length and |
| Pack_4.Length(Native_Binary) >= TC_Min_Length and |
| Pack_4.Length(Low_Order_First) <= TC_Max_Length) |
| then |
| Report.Failed("Incorrect result from function Length"); |
| end if; |
| |
| |
| |
| -- Check that function To_Decimal with Byte_Array and Binary_Format |
| -- parameters will return a decimal type value that corresponds to |
| -- parameter Item (of type Byte_Array) under the specified Format. |
| |
| if Pack_1.To_Decimal(Item => Pack_1.To_Binary(Item => TC_Dec_1, |
| Format => Native_Binary), |
| Format => Native_Binary) /= |
| TC_Dec_1 |
| then |
| Report.Failed("Incorrect result from function To_Decimal - 1"); |
| end if; |
| |
| if Pack_3.To_Decimal(Pack_3.To_Binary(TC_Dec_3, High_Order_First), |
| Format => High_Order_First) /= |
| TC_Dec_3 |
| then |
| Report.Failed("Incorrect result from function To_Decimal - 2"); |
| end if; |
| |
| if Pack_4.To_Decimal(Pack_4.To_Binary(TC_Dec_4, Low_Order_First), |
| Low_Order_First) /= |
| TC_Dec_4 |
| then |
| Report.Failed("Incorrect result from function To_Decimal - 3"); |
| end if; |
| |
| |
| |
| -- Check that Conversion_Error is propagated by function To_Decimal |
| -- if the Byte_Array parameter Item represents a decimal value outside |
| -- the range of decimal type Num. |
| -- Note: use a Byte_Array value Item created by an instantiation of |
| -- To_Binary with a larger Num type as the generic formal. |
| |
| begin |
| TC_Dec_4 := 99999.9001; |
| TC_Dec_1 := Pack_1.To_Decimal(Pack_4.To_Binary(TC_Dec_4, |
| Native_Binary), |
| Format => Native_Binary); |
| if TC_Dec_1 = 99999.9 then |
| Report.Comment("Minimize dead assignment optimization -- " & |
| "Should never be printed"); |
| end if; |
| Report.Failed("Conversion_Error not raised following call to " & |
| "function To_Decimal if the Byte_Array parameter " & |
| "Item represents a decimal value outside the " & |
| "range of decimal type Num"); |
| exception |
| when Conversion_Error => null; -- OK, expected exception. |
| when The_Error : others => |
| Report.Failed(Exception_Name(The_Error) & " was incorrectly " & |
| "raised following call to function To_Decimal " & |
| "if the Byte_Array parameter Item represents " & |
| "a decimal value outside the range of decimal " & |
| "type Num"); |
| end; |
| |
| |
| |
| -- Check that function To_Binary will produce a Byte_Array result that |
| -- corresponds to the decimal type parameter Item, under the specified |
| -- Binary_Format. |
| |
| -- Different ordering. |
| TC_Dec_1 := 12345.6; |
| if Pack_1.To_Binary(TC_Dec_1, Low_Order_First) = |
| Pack_1.To_Binary(TC_Dec_1, High_Order_First) |
| then |
| Report.Failed("Incorrect result from function To_Binary - 1"); |
| end if; |
| |
| -- Variable vs. literal. |
| TC_Dec_2 := 12345.00; |
| if Pack_2.To_Binary(TC_Dec_2, Native_Binary) /= |
| Pack_2.To_Binary(12345.00, Native_Binary) |
| then |
| Report.Failed("Incorrect result from function To_Binary - 2"); |
| end if; |
| |
| exception |
| when The_Error : others => |
| Report.Failed("The following exception was raised in the " & |
| "Test_Block: " & Exception_Name(The_Error)); |
| end Test_Block; |
| |
| Report.Result; |
| |
| end CXB4007; |