| 2012-07-31 Mike Frysinger <vapier@gentoo.org> |
| |
| * machs.c (bf54x_roms): Pass 0x1000 to alias field of BFROM, and |
| 0x10000 to the alias field of BFROMA. |
| (bf561_roms): Pass 0x1000 to alias field of BFROM. |
| (bf59x_roms): Pass 0x10000 to alias field of BFROMA. |
| |
| 2012-07-31 Mike Frysinger <vapier@gentoo.org> |
| |
| * machs.c (bfin_reg_fetch): Change return 0 to return -1, and |
| return -1 to return 4. |
| (bfin_reg_store): Likewise. |
| |
| 2012-06-15 Joel Brobecker <brobecker@adacore.com> |
| |
| * config.in, configure: Regenerate. |
| |
| 2012-04-09 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pint. |
| * configure: Regenerate. |
| * dv-bfin_pint.c, dv-bfin_pint.h: New device model. |
| * machs.c (bf542_dev): Add PINT register blocks. |
| (bf544_dev, bf547_dev): Likewise. |
| (PINT_PIQS): Define. |
| (bf54x_port): Add pint/gpio routing. |
| * machs.h (BFIN_MMR_PINT_SIZE): Define. |
| |
| 2012-04-09 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio2. |
| * configure: Regenerate. |
| * dv-bfin_gpio2.c, dv-bfin_gpio2.h: New device model. |
| * machs.c (bf54x_mem): Delete GPIO mem stub. |
| (bf542_dev): Add GPIO register blocks. |
| (bf544_dev, bf547_dev): Likewise. |
| * machs.h (BFIN_MMR_GPIO2_SIZE): Define. |
| |
| 2012-04-09 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32shift_0): Extract the sign for ASHIFT |
| and LSHIFT, and set ASTAT based on the before/after values. |
| Rename "val" to "acc" to be consistent with other code branches. |
| |
| 2012-04-09 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (sgn_extend): New helper. |
| (decode_dsp32shiftimm_0): Call lshift when newimmag is more |
| than 16, otherwise call ashiftrt. Set ASTAT fields as needed. |
| For accumulator shifts, call new sgn_extend helper. |
| |
| 2012-04-08 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-sim.c (illegal_instruction_or_combination): New helper. |
| (decode_ProgCtrl_0): Call illegal_instruction_or_combination instead |
| of illegal_instruction. |
| (decode_PushPopReg_0, decode_CCflag_0, decode_CC2dreg_0, |
| decode_LDSTpmod_0, decode_dagMODim_0, decode_dagMODik_0, |
| decode_dspLDST_0, decode_LDST_0, _interp_insn_bfin): Likewise. |
| (decode_PushPopMultiple_0): Call illegal_instruction_combination when |
| PARALLEL_GROUP is not BFIN_PARALLEL_NONE. |
| (decode_CCflag_0, decode_REGMV_0, decode_ALU2op_0, decode_PTR2op_0, |
| decode_COMPI2opD_0, decode_COMPI2opP_0): Likewise. |
| (decode_CC2stat_0): Check PARALLEL_GROUP before cbit. |
| (decode_LDSTpmod_0): Call illegal_instruction_combination when |
| PARALLEL_GROUP is BFIN_PARALLEL_GROUP2. |
| (decode_dagMODim_0, decode_dagMODik_0, decode_LDST_0, |
| decode_LDSTiiFP_0, decode_LDSTii_0): Likewise. |
| |
| 2012-04-08 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-sim.h (bfin_parallel_group): New enum. |
| (bfin_cpu_state): Add new "group" member. |
| (PARALLEL_GROUP): Define. |
| * bfin-sim.c (decode_ProgCtrl_0): Change INSN_LEN check to |
| PARALLEL_GROUP. |
| (decode_CaCTRL_0, decode_PushPopReg_0, decode_ccMV_0, decode_CCflag_0, |
| decode_CC2dreg_0, decode_CC2stat_0, decode_BRCC_0, decode_UJUMP_0, |
| decode_LOGI2op_0, decode_LoopSetup_0, decode_LDIMMhalf_0, |
| decode_CALLa_0, decode_linkage_0): Likewise. |
| (_interp_insn_bfin): Set PARALLEL_GROUP. |
| (interp_insn_bfin): Likewise. |
| |
| 2012-04-08 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Delete extra space in TRACE_INSN. |
| |
| 2012-04-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-sim.c (_interp_insn_bfin): Call illegal_instruction_combination |
| when INSN_LEN is non-zero before 32bit decode. |
| |
| 2012-04-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (fmtconst): Replace decimal handling with a single |
| sprintf call and the '*' field width. |
| |
| 2012-04-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * machs.c (bfin_model_map_bfrom): Return when mnum is 535. |
| |
| 2012-04-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (bfin_user_init): Move auxvt_size decl from top to |
| inside of auxvt check. |
| |
| 2012-03-31 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_sic.c (bfin_sic_finish): Change iwr1 to iwr2. |
| |
| 2012-03-31 Mike Frysinger <vapier@gentoo.org> |
| |
| * devices.c: Include devices.h. |
| |
| 2012-03-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, config.in, configure: Regenerate. |
| |
| 2012-03-19 Robin Getz <robin.getz@analog.com> |
| Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-sim.c (lshift): Add an overflow flag. Delete now unused |
| i, j, and tmp vars. Add a new v_i var. Split the overflow logic |
| out from the saturate logic. Do not set V ASTAT bits when working |
| with accumulators. |
| (decode_ALU2op_0): Add new argument to lshift call. |
| (decode_LOGI2op_0, decode_dsp32shift_0, decode_dsp32shiftimm_0): |
| Likewise. |
| |
| 2012-03-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_ebiu_amc.c (struct bfin_ebiu_amc): Add bank_base. |
| (bfin_ebiu_amc_write_amgctl): Replace BFIN_EBIU_AMC_BASE with |
| amc->bank_base. |
| (bfin_ebiu_amc_finish): Assign BFIN_EBIU_AMC_BASE to amc->bank_base. |
| |
| 2012-03-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_ebiu_amc.c (bfin_ebiu_amc_attach_address_callback): Use |
| ARRAY_SIZE rather than hardcoded constant. |
| |
| 2012-02-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in: Regenerate. |
| * configure: Likewise. |
| * configure.ac: Add linux/types.h to AC_CHECK_HEADERS. |
| * dv-eth_phy.c: Check for HAVE_LINUX_TYPES_H, and delete __u16 and |
| _LINUX_TYPES_H defines. |
| |
| 2011-12-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (bfin_syscall): Increase _tbuf storage. Declare new local |
| tstr buffer. Call cb_get_string on tstr when handling CB_SYS_stat64, |
| CB_SYS_lstat64, CB_SYS_open, CB_SYS_write, CB_SYS_unlink, |
| CB_SYS_truncate, CB_SYS_rename, CB_SYS_stat, CB_SYS_lstat. Include |
| tstr in the tbuf output. |
| |
| 2011-12-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in: Delete all dependency rules. |
| * aclocal.m4, configure: Regenerate. |
| |
| 2011-10-19 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate after common/acinclude.m4 update. |
| |
| 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Change include to common/acinclude.m4. |
| * aclocal.m4, configure: Regenerate. |
| |
| 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER |
| call. Replace common.m4 include with SIM_AC_COMMON. |
| * configure: Regenerate. |
| |
| 2011-09-28 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns. |
| |
| 2011-07-05 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_do_command): Delete. |
| |
| 2011-07-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from |
| stat_map_32 and stat_map_64. |
| (cb_libgloss_stat_map_32): New stat map. |
| (stat_map_32, stat_map_64): New stat map pointers. |
| (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and |
| stat_map_64 to cb_linux_stat_map_64. |
| (bfin_virtual_init): New function. |
| (sim_create_inferior): Call bfin_virtual_init for all other envs. |
| |
| 2011-06-22 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (bfin_syscall): Delete old comment. Set dreg 1 to |
| sc.result2 and dreg 2 to sc.errcode. |
| |
| 2011-06-18 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0, |
| else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and |
| ASHIFT accumulator insns. |
| |
| 2011-06-18 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG. |
| (lshiftrt): Likewise. |
| |
| 2011-06-18 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc |
| rather than get_extended_acc in LSHIFT insns. |
| |
| 2011-06-18 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU. |
| Check MM once when mmod is M_FU to match M_TFU better. |
| |
| 2011-06-18 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than |
| 32, perform a left shift. Update the corresponding AV bit. Set |
| AZ when the low 32bits are also zero. |
| |
| 2011-06-18 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns, |
| call lshift only when count is positive. Otherwise, call ashiftrt. |
| With arithmetic right shift insns, call ashiftrt when the value is |
| small enough, otherwise call lshift. |
| |
| 2011-06-18 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (extract_mult): Call saturate_s16 directly when |
| mmod is M_IH rather than computing the result by hand. |
| |
| 2011-06-18 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value |
| before saturation, set sat when more cases saturate, and set the |
| overflow bit based on these results. For M_TFU, M_IU, M_FU, and |
| M_W32, change the max values compared against. |
| (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1 |
| when processing MAC1 and pass v_0 when processing MAC0. Combine |
| the results into the V/VS ASTAT bits. |
| |
| 2011-06-18 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set |
| and mmod is M_IU. Call saturate_s16 when MM is set and mmod |
| is M_TFU. |
| |
| 2011-06-18 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and |
| allow MM to sign extend all the time. |
| (decode_macfunc): Likewise. Drop sign extension of unsigned |
| values. |
| |
| 2011-06-18 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (saturate_s40_astat): Change ">=" to ">". |
| (decode_macfunc): Likewise when mmod is M_IH. |
| |
| 2011-06-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * interp.c (sim_create_inferior): Change free to freeargv. |
| |
| 2011-06-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * machs.c (bf534_dev, bf537_dev): Add glue-or devices. |
| (bf537_port): Define applicable devices with PORT to the glue-or |
| devices instead of SIC. |
| (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic. |
| Only parse reg/type when the device has an address. Move the call |
| to dv_bfin_hw_port_parse up before slash check. |
| |
| 2011-06-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the |
| BFIN_SIC_TO_CEC_PORTS definition. |
| (SIC_PORTS): New define. |
| (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports, |
| bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports, |
| bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports): |
| Delete old layouts. |
| (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports, |
| bfin_sic_561_ports): Define new layouts with SIC_PORTS(). |
| (bfin_sic_finish): Change reference to bfin_sic_50x_ports, |
| bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports |
| to bfin_sic2_ports. Change reference to bfin_sic_533_ports, |
| bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports. |
| Change reference to bfin_sic_54x_ports to bfin_sic3_ports. |
| * machs.c (bfin_port_layout): New structure. |
| (bfin_model_data): Add new "port" and "port_count" members. |
| (PORT, SIC): New defines. |
| (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port, |
| bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port): |
| Move and redefine port layout from dv-bfin_sic.c to here. |
| (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port, |
| bf518_port, bf522_port, bf523_port, bf524_port, bf525_port, |
| bf526_port, bf527_port, bf531_port, bf532_port, bf534_port, |
| bf536_port, bf539_port, bf542_port, bf544_port, bf547_port, |
| bf548_port, bf549_port): New defines. |
| (bfin_model_data): Link in new bfin_port_layout.port member. |
| (dv_bfin_hw_port_parse): New function. |
| (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function. |
| (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for |
| bfin_sic links with new dv_bfin_hw_port_parse function. |
| |
| 2011-06-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation. |
| |
| 2011-05-25 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL. |
| |
| 2011-05-25 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ... |
| * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ... |
| * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ... |
| * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ... |
| * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ... |
| * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ... |
| * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ... |
| * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ... |
| * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ... |
| * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ... |
| * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ... |
| * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ... |
| * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ... |
| * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ... |
| * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ... |
| * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ... |
| * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ... |
| * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ... |
| * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ... |
| * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ... |
| * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ... |
| * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ... |
| * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ... |
| * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ... |
| * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ... |
| * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ... |
| * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ... |
| * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ... |
| * machs.h: ... here. |
| * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac. |
| |
| 2011-05-25 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (dv-bfin_pfmon.o): New target. |
| * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon. |
| * configure: Regenerated. |
| * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files. |
| * machs.c: Add include new bfin_pfmon.h. |
| (bfin_core_dev): Add pfmon. |
| |
| 2011-05-25 Mike Frysinger <vapier@gentoo.org> |
| |
| * machs.c (bf526_roms): Add a region with rev of 2. |
| (bf54x_roms): Add regions with rev of 4. |
| * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and |
| bf54x_l1-0.4.h headers. |
| * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h: |
| New header files. |
| |
| 2011-05-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6) |
| check for SP reg. |
| |
| 2011-05-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a |
| local uart. When LOOP_ENA is set in mcr, write to the saved byte |
| and count fields of the uart. |
| (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte |
| and bfin_uart_get_next_byte. |
| (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count |
| check first, and skip the remaining code when LOOP_ENA is set in mcr. |
| * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument. |
| (bfin_uart_get_next_byte): Likewise. |
| (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define. |
| * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when |
| calling bfin_uart_write_byte and bfin_uart_get_next_byte. |
| |
| 2011-05-09 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits |
| from uart->lsr before setting them. |
| |
| 2011-04-27 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_dmac.c (bfin_dmac): Constify pmap array. |
| (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap, |
| bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap, |
| bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap, |
| bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap): |
| Likewise. |
| |
| 2011-04-26 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function. |
| (bfin_gpio_io_write_buffer): Store the current port state into |
| "data", and call bfin_gpio_forward_ouput when the data or dir |
| MMRs are updated. |
| (bfin_gpio_ports): Change p0..p15 to bidirect_port. |
| |
| 2011-04-26 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member. |
| (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions. |
| (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the |
| mask a or mask b MMRs are written. |
| (bfin_gpio_port_event): When handling edge gpios, set the bit in |
| int_state, call bfin_gpio_forward_ints, and then clear the bit. |
| When handling level gpios, clear/set the bit in int_state rather |
| than returning immediately. Call bfin_gpio_forward_ints instead |
| of checking mask[ab] and calling HW_TRACE/hw_port_event directly. |
| |
| 2011-04-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for |
| BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and |
| BYTEUNPACK. |
| (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK, |
| BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24. |
| |
| 2011-04-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling |
| BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, |
| and BYTEUNPACK insns. |
| |
| 2011-04-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_sic.c (bfin_sic_port_event): New helper function. |
| (bfin_sic_52x_port_event, bfin_sic_537_port_event, |
| bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level |
| in the trace output, and call the new bfin_sic_port_event func. |
| |
| 2011-04-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_gpio.c (bfin_gpio_ports): Add p15. |
| |
| 2011-04-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_otp.c (bfin_otp_ports): Declare. |
| (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports. |
| |
| 2011-03-29 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate after common/aclocal.m4 changes. |
| |
| 2011-03-28 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16 |
| and add to casted low 16bits of A0.L and store in val0. Cast high |
| 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and |
| store in val1. Delete bit checks of val0 and val1. |
| |
| 2011-03-26 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when |
| the result was 0x80000000 for RND12 subtraction. |
| |
| 2011-03-26 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set. |
| |
| 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every |
| major code flow point. |
| * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just |
| before calling hw_port_event on ourselves. |
| (bfin_sic_52x_port_event, bfin_sic_537_port_event, |
| bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE |
| at the start of the function. |
| |
| 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking. |
| Normalize "level" to 0/1 values. Shift "level" over by "my_port". |
| Invert port->both bit check. |
| |
| 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the |
| valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs. |
| |
| 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * TODO: Document some known SIC issues. |
| |
| 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * devices.h (dv_w1c): Fix typos in documentation of "bits" arg. |
| * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4. |
| * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4 |
| for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs. |
| * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2. |
| * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2. |
| * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4. |
| * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2. |
| * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2. |
| * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2. |
| * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2. |
| * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2. |
| * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2. |
| * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2. |
| |
| 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define. |
| |
| 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG. |
| |
| 2011-03-23 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended |
| value for the VIT_MAX insn, and mask off the result when done. |
| |
| 2011-03-23 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false, |
| and set A0 to a0_lo when up_lo is false. |
| |
| 2011-03-23 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of |
| saturate_s40, and use the v parameter to update the AV bit. Set the |
| AC bit only when the final result is 0. |
| |
| 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define. |
| (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports, |
| bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports, |
| bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports): |
| Encode ids with the ENC macro. |
| (bfin_sic_52x_port_event, bfin_sic_537_port_event, |
| bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx |
| from my_port with DEC_SIC, and set bit from my_port with DEC_PIN. |
| (bfin_sic_533_port_event): Delete. |
| (bfin_sic_finish): Call set_hw_port_event with |
| bfin_sic_537_port_event for BF533 and BF59x targets. |
| |
| 2011-03-23 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for |
| BYTEOP1P, BYTEOP2P, and BYTEOP3P insns. |
| |
| 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, |
| bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): |
| Change bfin_gpio addresses from f/g/h to 5/6/7. |
| (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'. |
| |
| 2011-03-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (AC_CHECK_FUNCS): Check for kill and pread. |
| * configure: Regenerate. |
| * config.in: Regenerate. |
| * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using |
| kill or pread. |
| |
| 2011-03-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (dv-bfin_gpio.o): New target. |
| * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio. |
| * configure: Regenerate. |
| * dv-bfin_gpio.c, dv-bfin_gpio.h: New files. |
| * machs.c: Include dv-bfin_gpio.h. |
| (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem, |
| bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem): |
| Delete GPIO memory stubs. |
| (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev, |
| bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO |
| peripheral devices. |
| (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC. |
| |
| 2011-03-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h, |
| bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h, |
| bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h, |
| bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h, |
| bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h, |
| bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h, |
| bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h, |
| bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h, |
| bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c, |
| dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c, |
| dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c, |
| dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c, |
| dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c, |
| dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c, |
| dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c, |
| dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c, |
| linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style. |
| |
| 2011-03-15 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds |
| and subs. |
| |
| 2011-03-15 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check. |
| |
| 2011-03-15 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_macfunc): New neg parameter. Set when the |
| high bit is set after extract_mult. |
| (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc |
| functions. Use these to update the AN bit. |
| |
| 2011-03-15 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to |
| the extract_mult functions. Include these when updating the V, VS, |
| and V_COPY bits. |
| |
| 2011-03-15 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (astat_names): New global bit array. |
| (decode_CC2stat_0): Delete local astat_name and astat_names. |
| (decode_psedodbg_assert_0): Move hardcoded offset into a variable. |
| Print out ASTAT bit values when checking an ASTAT register. |
| |
| 2010-03-15 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (extract_mult): Handle M_IU. |
| |
| 2011-03-05 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h, |
| bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, |
| bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, |
| bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, |
| bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, |
| bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, |
| bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, |
| bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, |
| bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, |
| bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure, |
| configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h, |
| dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h, |
| dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h, |
| dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c, |
| dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c, |
| dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c, |
| dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c, |
| dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c, |
| dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c, |
| dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c, |
| dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c, |
| dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c, |
| dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c, |
| dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c, |
| gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s, |
| linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h, |
| tconfig.in: New Blackfin port. |