llvm / llvm-archive / 58b05407658c2569b188facf1d1f15e1c0e95aa4 / . / clang-tests-external / gdb / 7.5 / gdb / prologue-value.h

/* Interface to prologue value handling for GDB. | |

Copyright 2003-2005, 2007-2012 Free Software Foundation, Inc. | |

This file is part of GDB. | |

This program is free software; you can redistribute it and/or modify | |

it under the terms of the GNU General Public License as published by | |

the Free Software Foundation; either version 3 of the License, or | |

(at your option) any later version. | |

This program is distributed in the hope that it will be useful, | |

but WITHOUT ANY WARRANTY; without even the implied warranty of | |

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |

GNU General Public License for more details. | |

You should have received a copy of the GNU General Public License | |

along with this program. If not, see <http://www.gnu.org/licenses/>. */ | |

#ifndef PROLOGUE_VALUE_H | |

#define PROLOGUE_VALUE_H | |

/* When we analyze a prologue, we're really doing 'abstract | |

interpretation' or 'pseudo-evaluation': running the function's code | |

in simulation, but using conservative approximations of the values | |

it would have when it actually runs. For example, if our function | |

starts with the instruction: | |

addi r1, 42 # add 42 to r1 | |

we don't know exactly what value will be in r1 after executing this | |

instruction, but we do know it'll be 42 greater than its original | |

value. | |

If we then see an instruction like: | |

addi r1, 22 # add 22 to r1 | |

we still don't know what r1's value is, but again, we can say it is | |

now 64 greater than its original value. | |

If the next instruction were: | |

mov r2, r1 # set r2 to r1's value | |

then we can say that r2's value is now the original value of r1 | |

plus 64. | |

It's common for prologues to save registers on the stack, so we'll | |

need to track the values of stack frame slots, as well as the | |

registers. So after an instruction like this: | |

mov (fp+4), r2 | |

then we'd know that the stack slot four bytes above the frame | |

pointer holds the original value of r1 plus 64. | |

And so on. | |

Of course, this can only go so far before it gets unreasonable. If | |

we wanted to be able to say anything about the value of r1 after | |

the instruction: | |

xor r1, r3 # exclusive-or r1 and r3, place result in r1 | |

then things would get pretty complex. But remember, we're just | |

doing a conservative approximation; if exclusive-or instructions | |

aren't relevant to prologues, we can just say r1's value is now | |

'unknown'. We can ignore things that are too complex, if that loss | |

of information is acceptable for our application. | |

So when I say "conservative approximation" here, what I mean is an | |

approximation that is either accurate, or marked "unknown", but | |

never inaccurate. | |

Once you've reached the current PC, or an instruction that you | |

don't know how to simulate, you stop. Now you can examine the | |

state of the registers and stack slots you've kept track of. | |

- To see how large your stack frame is, just check the value of the | |

stack pointer register; if it's the original value of the SP | |

minus a constant, then that constant is the stack frame's size. | |

If the SP's value has been marked as 'unknown', then that means | |

the prologue has done something too complex for us to track, and | |

we don't know the frame size. | |

- To see where we've saved the previous frame's registers, we just | |

search the values we've tracked --- stack slots, usually, but | |

registers, too, if you want --- for something equal to the | |

register's original value. If the ABI suggests a standard place | |

to save a given register, then we can check there first, but | |

really, anything that will get us back the original value will | |

probably work. | |

Sure, this takes some work. But prologue analyzers aren't | |

quick-and-simple pattern patching to recognize a few fixed prologue | |

forms any more; they're big, hairy functions. Along with inferior | |

function calls, prologue analysis accounts for a substantial | |

portion of the time needed to stabilize a GDB port. So I think | |

it's worthwhile to look for an approach that will be easier to | |

understand and maintain. In the approach used here: | |

- It's easier to see that the analyzer is correct: you just see | |

whether the analyzer properly (albiet conservatively) simulates | |

the effect of each instruction. | |

- It's easier to extend the analyzer: you can add support for new | |

instructions, and know that you haven't broken anything that | |

wasn't already broken before. | |

- It's orthogonal: to gather new information, you don't need to | |

complicate the code for each instruction. As long as your domain | |

of conservative values is already detailed enough to tell you | |

what you need, then all the existing instruction simulations are | |

already gathering the right data for you. | |

A 'struct prologue_value' is a conservative approximation of the | |

real value the register or stack slot will have. */ | |

struct prologue_value { | |

/* What sort of value is this? This determines the interpretation | |

of subsequent fields. */ | |

enum { | |

/* We don't know anything about the value. This is also used for | |

values we could have kept track of, when doing so would have | |

been too complex and we don't want to bother. The bottom of | |

our lattice. */ | |

pvk_unknown, | |

/* A known constant. K is its value. */ | |

pvk_constant, | |

/* The value that register REG originally had *UPON ENTRY TO THE | |

FUNCTION*, plus K. If K is zero, this means, obviously, just | |

the value REG had upon entry to the function. REG is a GDB | |

register number. Before we start interpreting, we initialize | |

every register R to { pvk_register, R, 0 }. */ | |

pvk_register, | |

} kind; | |

/* The meanings of the following fields depend on 'kind'; see the | |

comments for the specific 'kind' values. */ | |

int reg; | |

CORE_ADDR k; | |

}; | |

typedef struct prologue_value pv_t; | |

/* Return the unknown prologue value --- { pvk_unknown, ?, ? }. */ | |

pv_t pv_unknown (void); | |

/* Return the prologue value representing the constant K. */ | |

pv_t pv_constant (CORE_ADDR k); | |

/* Return the prologue value representing the original value of | |

register REG, plus the constant K. */ | |

pv_t pv_register (int reg, CORE_ADDR k); | |

/* Return conservative approximations of the results of the following | |

operations. */ | |

pv_t pv_add (pv_t a, pv_t b); /* a + b */ | |

pv_t pv_add_constant (pv_t v, CORE_ADDR k); /* a + k */ | |

pv_t pv_subtract (pv_t a, pv_t b); /* a - b */ | |

pv_t pv_logical_and (pv_t a, pv_t b); /* a & b */ | |

/* Return non-zero iff A and B are identical expressions. | |

This is not the same as asking if the two values are equal; the | |

result of such a comparison would have to be a pv_boolean, and | |

asking whether two 'unknown' values were equal would give you | |

pv_maybe. Same for comparing, say, { pvk_register, R1, 0 } and { | |

pvk_register, R2, 0}. | |

Instead, this function asks whether the two representations are the | |

same. */ | |

int pv_is_identical (pv_t a, pv_t b); | |

/* Return non-zero if A is known to be a constant. */ | |

int pv_is_constant (pv_t a); | |

/* Return non-zero if A is the original value of register number R | |

plus some constant, zero otherwise. */ | |

int pv_is_register (pv_t a, int r); | |

/* Return non-zero if A is the original value of register R plus the | |

constant K. */ | |

int pv_is_register_k (pv_t a, int r, CORE_ADDR k); | |

/* A conservative boolean type, including "maybe", when we can't | |

figure out whether something is true or not. */ | |

enum pv_boolean { | |

pv_maybe, | |

pv_definite_yes, | |

pv_definite_no, | |

}; | |

/* Decide whether a reference to SIZE bytes at ADDR refers exactly to | |

an element of an array. The array starts at ARRAY_ADDR, and has | |

ARRAY_LEN values of ELT_SIZE bytes each. If ADDR definitely does | |

refer to an array element, set *I to the index of the referenced | |

element in the array, and return pv_definite_yes. If it definitely | |

doesn't, return pv_definite_no. If we can't tell, return pv_maybe. | |

If the reference does touch the array, but doesn't fall exactly on | |

an element boundary, or doesn't refer to the whole element, return | |

pv_maybe. */ | |

enum pv_boolean pv_is_array_ref (pv_t addr, CORE_ADDR size, | |

pv_t array_addr, CORE_ADDR array_len, | |

CORE_ADDR elt_size, | |

int *i); | |

/* A 'struct pv_area' keeps track of values stored in a particular | |

region of memory. */ | |

struct pv_area; | |

/* Create a new area, tracking stores relative to the original value | |

of BASE_REG. If BASE_REG is SP, then this effectively records the | |

contents of the stack frame: the original value of the SP is the | |

frame's CFA, or some constant offset from it. | |

Stores to constant addresses, unknown addresses, or to addresses | |

relative to registers other than BASE_REG will trash this area; see | |

pv_area_store_would_trash. | |

To check whether a pointer refers to this area, only the low | |

ADDR_BIT bits will be compared. */ | |

struct pv_area *make_pv_area (int base_reg, int addr_bit); | |

/* Free AREA. */ | |

void free_pv_area (struct pv_area *area); | |

/* Register a cleanup to free AREA. */ | |

struct cleanup *make_cleanup_free_pv_area (struct pv_area *area); | |

/* Store the SIZE-byte value VALUE at ADDR in AREA. | |

If ADDR is not relative to the same base register we used in | |

creating AREA, then we can't tell which values here the stored | |

value might overlap, and we'll have to mark everything as | |

unknown. */ | |

void pv_area_store (struct pv_area *area, | |

pv_t addr, | |

CORE_ADDR size, | |

pv_t value); | |

/* Return the SIZE-byte value at ADDR in AREA. This may return | |

pv_unknown (). */ | |

pv_t pv_area_fetch (struct pv_area *area, pv_t addr, CORE_ADDR size); | |

/* Return true if storing to address ADDR in AREA would force us to | |

mark the contents of the entire area as unknown. This could happen | |

if, say, ADDR is unknown, since we could be storing anywhere. Or, | |

it could happen if ADDR is relative to a different register than | |

the other stores base register, since we don't know the relative | |

values of the two registers. | |

If you've reached such a store, it may be better to simply stop the | |

prologue analysis, and return the information you've gathered, | |

instead of losing all that information, most of which is probably | |

okay. */ | |

int pv_area_store_would_trash (struct pv_area *area, pv_t addr); | |

/* Search AREA for the original value of REGISTER. If we can't find | |

it, return zero; if we can find it, return a non-zero value, and if | |

OFFSET_P is non-zero, set *OFFSET_P to the register's offset within | |

AREA. GDBARCH is the architecture of which REGISTER is a member. | |

In the worst case, this takes time proportional to the number of | |

items stored in AREA. If you plan to gather a lot of information | |

about registers saved in AREA, consider calling pv_area_scan | |

instead, and collecting all your information in one pass. */ | |

int pv_area_find_reg (struct pv_area *area, | |

struct gdbarch *gdbarch, | |

int reg, | |

CORE_ADDR *offset_p); | |

/* For every part of AREA whose value we know, apply FUNC to CLOSURE, | |

the value's address, its size, and the value itself. */ | |

void pv_area_scan (struct pv_area *area, | |

void (*func) (void *closure, | |

pv_t addr, | |

CORE_ADDR size, | |

pv_t value), | |

void *closure); | |

#endif /* PROLOGUE_VALUE_H */ |