| # GCC target-specific configuration file. |
| # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 |
| # Free Software Foundation, Inc. |
| |
| #This file is part of GCC. |
| |
| #GCC is free software; you can redistribute it and/or modify it under |
| #the terms of the GNU General Public License as published by the Free |
| #Software Foundation; either version 2, or (at your option) any later |
| #version. |
| |
| #GCC is distributed in the hope that it will be useful, but WITHOUT |
| #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| #for more details. |
| |
| #You should have received a copy of the GNU General Public License |
| #along with GCC; see the file COPYING. If not, write to the Free |
| #Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA |
| #02110-1301, USA. |
| |
| # This is the GCC target-specific configuration file |
| # where a configuration type is mapped to different system-specific |
| # definitions and files. This is invoked by the autoconf-generated |
| # configure script. Putting it in a separate shell file lets us skip |
| # running autoconf when modifying target-specific information. |
| |
| # This file switches on the shell variable ${target}, and also uses the |
| # following shell variables: |
| # |
| # with_* Various variables as set by configure. |
| # |
| # enable_threads Either the name, yes or no depending on whether |
| # threads support was requested. |
| # |
| # default_use_cxa_atexit |
| # The default value for the $enable___cxa_atexit |
| # variable. enable___cxa_atexit needs to be set to |
| # "yes" for the correct operation of C++ destructors |
| # but it relies upon the presence of a non-standard C |
| # library function called __cxa_atexit. |
| # Since not all C libraries provide __cxa_atexit the |
| # default value of $default_use_cxa_atexit is set to |
| # "no" except for targets which are known to be OK. |
| # |
| # gas_flag Either yes or no depending on whether GNU as was |
| # requested. |
| # |
| # gnu_ld_flag Either yes or no depending on whether GNU ld was |
| # requested. |
| |
| # This file sets the following shell variables for use by the |
| # autoconf-generated configure script: |
| # |
| # cpu_type The name of the cpu, if different from the first |
| # chunk of the canonical target name. |
| # |
| # tm_defines List of target macros to define for all compilations. |
| # |
| # tm_file A list of target macro files, if different from |
| # "$cpu_type/$cpu_type.h". Usually it's constructed |
| # per target in a way like this: |
| # tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h" |
| # Note that the preferred order is: |
| # - specific target header "${cpu_type}/${cpu_type.h}" |
| # - generic headers like dbxelf.h elfos.h, etc. |
| # - specializing target headers like ${cpu_type.h}/elf.h |
| # This helps to keep OS specific stuff out of the CPU |
| # defining header ${cpu_type}/${cpu_type.h}. |
| # |
| # tm_p_file Location of file with declarations for functions |
| # LLVM LOCAL |
| # in $out_file & $out_cxx_file |
| # |
| # out_file The name of the machine description C support |
| # file, if different from "$cpu_type/$cpu_type.c". |
| # LLVM LOCAL |
| # out_cxx_file The name of the machine description C++ support file. |
| # |
| # md_file The name of the machine-description file, if |
| # different from "$cpu_type/$cpu_type.md". |
| # |
| # tmake_file A list of machine-description-specific |
| # makefile-fragments, if different from |
| # "$cpu_type/t-$cpu_type". |
| # |
| # extra_modes The name of the file containing a list of extra |
| # machine modes, if necessary and different from |
| # "$cpu_type/$cpu_type-modes.def". |
| # |
| # extra_objs List of extra objects that should be linked into |
| # the compiler proper (cc1, cc1obj, cc1plus) |
| # depending on target. |
| # |
| # extra_gcc_objs List of extra objects that should be linked into |
| # the compiler driver (gcc) depending on target. |
| # |
| # extra_headers List of used header files from the directory |
| # config/${cpu_type}. |
| # |
| # extra_passes List of extra executables compiled for this target |
| # machine, used for compiling from source to object. |
| # |
| # extra_parts List of extra object files that should be compiled |
| # for this target machine. |
| # |
| # extra_programs Like extra_passes, but these are used when linking. |
| # |
| # extra_options List of target-dependent .opt files. |
| # |
| # c_target_objs List of extra target-dependent objects that be |
| # linked into the C compiler only. |
| # |
| # cxx_target_objs List of extra target-dependent objects that be |
| # linked into the C++ compiler only. |
| # |
| # target_gtfiles List of extra source files with type information. |
| # |
| # xm_defines List of macros to define when compiling for the |
| # target machine. |
| # |
| # xm_file List of files to include when compiling for the |
| # target machine. |
| # |
| # use_collect2 Set to yes or no, depending on whether collect2 |
| # will be used. |
| # |
| # target_cpu_default Set to override the default target model. |
| # |
| # gdb_needs_out_file_path |
| # Set to yes if gdb needs a dir command with |
| # `dirname $out_file`. |
| # |
| # thread_file Set to control which thread package to use. |
| # |
| # gas Set to yes or no depending on whether the target |
| # system normally uses GNU as. |
| # |
| # need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide |
| # for this target. This is true iff this target |
| # supports "long" or "wchar_t" wider than 32 bits. |
| # |
| # configure_default_options |
| # Set to an initializer for configure_default_options |
| # in configargs.h, based on --with-cpu et cetera. |
| # |
| # use_fixproto Set to "yes" if fixproto should be run normally, |
| # "no" if fixproto should never be run. |
| |
| # The following variables are used in each case-construct to build up the |
| # outgoing variables: |
| # |
| # gnu_ld Set to yes or no depending on whether the target |
| # system normally uses GNU ld. |
| |
| out_file= |
| # LLVM LOCAL |
| out_cxx_file= |
| tmake_file= |
| extra_headers= |
| extra_passes= |
| extra_parts= |
| extra_programs= |
| extra_objs= |
| extra_gcc_objs= |
| extra_options= |
| c_target_objs= |
| cxx_target_objs= |
| tm_defines= |
| xm_defines= |
| # Set this to force installation and use of collect2. |
| use_collect2= |
| # Set this to override the default target model. |
| target_cpu_default= |
| # Set this if gdb needs a dir command with `dirname $out_file` |
| gdb_needs_out_file_path= |
| # Set this to control which thread package will be used. |
| thread_file= |
| # Reinitialize these from the flag values every loop pass, since some |
| # configure entries modify them. |
| gas="$gas_flag" |
| gnu_ld="$gnu_ld_flag" |
| default_use_cxa_atexit=no |
| target_gtfiles= |
| need_64bit_hwint= |
| |
| # Default to not using fixproto. Targets which need fixproto should |
| # specifically set this to 'yes'. |
| use_fixproto=no |
| |
| # Don't carry these over build->host->target. Please. |
| xm_file= |
| md_file= |
| |
| # Obsolete configurations. |
| case ${target} in |
| c4x-* \ |
| | tic4x-* \ |
| ) |
| if test "x$enable_obsolete" != xyes; then |
| echo "*** Configuration ${target} is obsolete." >&2 |
| echo "*** Specify --enable-obsolete to build it anyway." >&2 |
| echo "*** Support will be REMOVED in the next major release of GCC," >&2 |
| echo "*** unless a maintainer comes forward." >&2 |
| exit 1 |
| fi;; |
| esac |
| |
| # Unsupported targets list. Do not put an entry in this list unless |
| # it would otherwise be caught by a more permissive pattern. The list |
| # should be in alphabetical order. |
| case ${target} in |
| alpha*-*-linux*libc1* \ |
| | i[34567]86-sequent-sysv \ |
| | i[34567]86-sequent-sysv[123]* \ |
| | i[34567]86-go32-* \ |
| | i[34567]86-*-go32* \ |
| | m68k-*-linux*aout* \ |
| | m68k-*-linux*libc1* \ |
| | mips64orion*-*-rtems* \ |
| | powerpc-*-linux*libc1* \ |
| | sparc-*-linux*aout* \ |
| | sparc-*-linux*libc1* \ |
| | sparc-hal-solaris2* \ |
| | thumb-*-* \ |
| | *-*-linux*coff* \ |
| | *-*-linux*oldld* \ |
| | *-*-rtemsaout* \ |
| | *-*-rtemscoff* \ |
| | vax-*-vms* \ |
| ) |
| echo "*** Configuration ${target} not supported" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be |
| # updated in each machine entry. Also set default extra_headers for some |
| # machines. |
| tm_p_file= |
| cpu_type=`echo ${target} | sed 's/-.*$//'` |
| cpu_is_64bit= |
| case ${target} in |
| m32c*-*-*) |
| cpu_type=m32c |
| tmake_file=m32c/t-m32c |
| ;; |
| alpha*-*-*) |
| cpu_type=alpha |
| need_64bit_hwint=yes |
| # LLVM LOCAL begin |
| out_cxx_file=alpha/llvm-alpha.cpp |
| # LLVM LOCAL end |
| ;; |
| am33_2.0-*-linux*) |
| cpu_type=mn10300 |
| ;; |
| strongarm*-*-*) |
| cpu_type=arm |
| # LLVM LOCAL begin |
| out_cxx_file=arm/llvm-arm.cpp |
| # LLVM LOCAL end |
| ;; |
| arm*-*-*) |
| cpu_type=arm |
| # APPLE LOCAL ARM v7 support, merge from Codesourcery. |
| extra_headers="mmintrin.h arm_neon.h" |
| # LLVM LOCAL begin |
| out_cxx_file=arm/llvm-arm.cpp |
| # LLVM LOCAL end |
| ;; |
| bfin*-*) |
| cpu_type=bfin |
| ;; |
| ep9312*-*-*) |
| cpu_type=arm |
| # LLVM LOCAL begin |
| out_cxx_file=arm/llvm-arm.cpp |
| # LLVM LOCAL end |
| ;; |
| frv*) cpu_type=frv |
| ;; |
| xscale-*-*) |
| cpu_type=arm |
| extra_headers="mmintrin.h" |
| # LLVM LOCAL begin |
| out_cxx_file=arm/llvm-arm.cpp |
| # LLVM LOCAL end |
| ;; |
| # APPLE LOCAL begin mainline |
| i[34567]86-*-*) |
| cpu_type=i386 |
| # LLVM LOCAL begin |
| out_cxx_file=i386/llvm-i386.cpp |
| # LLVM LOCAL end |
| # APPLE LOCAL begin 5612787 mainline sse4 |
| extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h |
| pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h |
| nmmintrin.h" |
| # APPLE LOCAL end 5612787 mainline sse4 |
| ;; |
| x86_64-*-*) |
| cpu_type=i386 |
| # LLVM LOCAL begin |
| out_cxx_file=i386/llvm-i386.cpp |
| # LLVM LOCAL end |
| # APPLE LOCAL begin 5612787 mainline sse4 |
| extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h |
| pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h |
| nmmintrin.h" |
| # APPLE LOCAL end 5612787 mainline sse4 |
| need_64bit_hwint=yes |
| ;; |
| # APPLE LOCAL end mainline |
| ia64-*-*) |
| extra_headers=ia64intrin.h |
| need_64bit_hwint=yes |
| ;; |
| hppa*-*-* | parisc*-*-*) |
| cpu_type=pa |
| ;; |
| m32r*-*-*) |
| cpu_type=m32r |
| ;; |
| m680[012]0-*-*) |
| cpu_type=m68k |
| extra_headers=math-68881.h |
| ;; |
| m68k-*-*) |
| extra_headers=math-68881.h |
| ;; |
| mips*-*-*) |
| cpu_type=mips |
| # LLVM LOCAL begin |
| out_cxx_file=mips/llvm-mips.cpp |
| # LLVM LOCAL end |
| need_64bit_hwint=yes |
| ;; |
| powerpc*-*-*) |
| cpu_type=rs6000 |
| extra_headers="ppc-asm.h altivec.h spe.h" |
| need_64bit_hwint=yes |
| case x$with_cpu in |
| xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456]|xrs64a) |
| cpu_is_64bit=yes |
| ;; |
| esac |
| ;; |
| rs6000*-*-*) |
| need_64bit_hwint=yes |
| ;; |
| score*-*-*) |
| cpu_type=score |
| ;; |
| sparc64*-*-*) |
| cpu_type=sparc |
| need_64bit_hwint=yes |
| ;; |
| sparc*-*-*) |
| cpu_type=sparc |
| ;; |
| spu*-*-*) |
| cpu_type=spu |
| need_64bit_hwint=yes |
| ;; |
| s390*-*-*) |
| cpu_type=s390 |
| need_64bit_hwint=yes |
| ;; |
| # Note the 'l'; we need to be able to match e.g. "shle" or "shl". |
| sh[123456789lbe]*-*-*) |
| cpu_type=sh |
| need_64bit_hwint=yes |
| ;; |
| tic4x-*-*) |
| cpu_type=c4x |
| ;; |
| esac |
| |
| tm_file=${cpu_type}/${cpu_type}.h |
| if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h |
| then |
| tm_p_file=${cpu_type}/${cpu_type}-protos.h |
| fi |
| extra_modes= |
| if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def |
| then |
| extra_modes=${cpu_type}/${cpu_type}-modes.def |
| fi |
| if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt |
| then |
| extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt" |
| fi |
| |
| case ${target} in |
| x86_64-*-*) |
| tm_file="i386/biarch64.h ${tm_file}" |
| ;; |
| esac |
| ## LLVM LOCAL begin add dependency for llvm-i386-target.h |
| case ${target} in |
| x86_64-*-* | i686-*-* | i386-*-*) |
| tm_file="i386/llvm-i386-target.h ${tm_file}" |
| ;; |
| esac |
| ## LLVM LOCAL end |
| |
| # On a.out targets, we need to use collect2. |
| case ${target} in |
| *-*-*aout*) |
| use_collect2=yes |
| ;; |
| esac |
| |
| # Common parts for widely ported systems. |
| case ${target} in |
| *-*-darwin*) |
| tm_file="${tm_file} darwin.h" |
| case ${target} in |
| *-*-darwin9*) |
| tm_file="${tm_file} darwin9.h" |
| ;; |
| # APPLE LOCAL begin .file/.loc 6349436 |
| *-*-darwin[12][0-9]*) |
| tm_file="${tm_file} darwin9.h darwin10.h" |
| ;; |
| # APPLE LOCAL end .file/.loc 6349436 |
| esac |
| tm_file="${tm_file} ${cpu_type}/darwin.h" |
| tm_p_file="${tm_p_file} darwin-protos.h" |
| # APPLE LOCAL 5681645 |
| tmake_file="t-darwin ${cpu_type}/t-darwin" |
| # LLVM LOCAL put va_opt in GC memory 7210265 |
| target_gtfiles="\$(srcdir)/config/darwin.c \$(srcdir)/config/darwin-c.c" |
| extra_options="${extra_options} darwin.opt" |
| c_target_objs="darwin-c.o" |
| cxx_target_objs="darwin-c.o" |
| extra_objs="darwin.o" |
| # APPLE LOCAL mainline 2007-06-14 5235474 |
| extra_gcc_objs="darwin-driver.o" |
| default_use_cxa_atexit=yes |
| case ${enable_threads} in |
| "" | yes | posix) thread_file='posix' ;; |
| esac |
| ;; |
| *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*) |
| # This is the place-holder for the generic a.out configuration |
| # of FreeBSD. No actual configuration resides here since |
| # there was only ever a bare-bones ix86 configuration for |
| # a.out and it exists solely in the machine-specific section. |
| # This place-holder must exist to avoid dropping into |
| # the generic ELF configuration of FreeBSD (i.e. it must be |
| # ordered before that section). |
| ;; |
| *-*-freebsd*) |
| # This is the generic ELF configuration of FreeBSD. Later |
| # machine-specific sections may refine and add to this |
| # configuration. |
| # |
| # Due to tm_file entry ordering issues that vary between cpu |
| # architectures, we only define fbsd_tm_file to allow the |
| # machine-specific section to dictate the final order of all |
| # entries of tm_file with the minor exception that components |
| # of the tm_file set here will always be of the form: |
| # |
| # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h |
| # |
| # The machine-specific section should not tamper with this |
| # ordering but may order all other entries of tm_file as it |
| # pleases around the provided core setting. |
| gas=yes |
| gnu_ld=yes |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o" |
| case ${target} in |
| *-*-freebsd3 | *-*-freebsd[3].*) |
| tm_defines="${tm_defines} FBSD_MAJOR=3" ;; |
| *-*-freebsd4 | *-*-freebsd[4].*) |
| tm_defines="${tm_defines} FBSD_MAJOR=4" ;; |
| *-*-freebsd5 | *-*-freebsd[5].*) |
| tm_defines="${tm_defines} FBSD_MAJOR=5" ;; |
| *-*-freebsd6 | *-*-freebsd[6].*) |
| tm_defines="${tm_defines} FBSD_MAJOR=6" ;; |
| *-*-freebsd7 | *-*-freebsd[7].*) |
| tm_defines="${tm_defines} FBSD_MAJOR=7" ;; |
| *-*-freebsd8 | *-*-freebsd[8].*) |
| tm_defines="${tm_defines} FBSD_MAJOR=8" ;; |
| *-*-freebsd9 | *-*-freebsd[9].*) |
| tm_defines="${tm_defines} FBSD_MAJOR=9" ;; |
| *) |
| echo 'Please update *-*-freebsd* in gcc/config.gcc' |
| exit 1 |
| ;; |
| esac |
| tmake_file="t-slibgcc-elf-ver t-freebsd" |
| case ${enable_threads} in |
| no) |
| fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h" |
| ;; |
| "" | yes | posix) |
| thread_file='posix' |
| tmake_file="${tmake_file} t-freebsd-thread" |
| # Before 5.0, FreeBSD can't bind shared libraries to -lc |
| # when "optionally" threaded via weak pthread_* checks. |
| case ${target} in |
| *-*-freebsd[34] | *-*-freebsd[34].*) |
| tmake_file="${tmake_file} t-slibgcc-nolc-override" |
| ;; |
| esac |
| ;; |
| *) |
| echo 'Unknown thread configuration for FreeBSD' |
| exit 1 |
| ;; |
| esac |
| fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h" |
| ;; |
| *-*-linux*libc1* | *-*-linux*aout*) |
| # Avoid the generic linux case. |
| ;; |
| *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu) |
| # Must come before *-*-gnu* (because of *-*-linux-gnu* systems). |
| extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o" |
| extra_options="${extra_options} linux.opt" |
| gas=yes |
| gnu_ld=yes |
| case ${enable_threads} in |
| "" | yes | posix) thread_file='posix' ;; |
| esac |
| tmake_file="t-slibgcc-elf-ver t-linux" |
| case ${target} in |
| *-*-*uclibc*) |
| tm_defines="${tm_defines} UCLIBC_DEFAULT=1" |
| ;; |
| *) |
| tm_defines="${tm_defines} UCLIBC_DEFAULT=0" |
| ;; |
| esac |
| # Assume that glibc or uClibc are being used and so __cxa_atexit is provided. |
| default_use_cxa_atexit=yes |
| ;; |
| *-*-gnu*) |
| # On the Hurd, the setup is just about the same on |
| # each different CPU. The specific machines that we |
| # support are matched above and just set $cpu_type. |
| tm_file="${cpu_type}/gnu.h" |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o" |
| # GNU tools are the only tools. |
| gas=yes |
| gnu_ld=yes |
| # These details are the same as for Linux. |
| # But here we need a little extra magic. |
| tmake_file="t-slibgcc-elf-ver t-linux t-gnu" |
| case ${target} in |
| alpha*) |
| tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}" |
| ;; |
| i[34567]86-*-*) |
| tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}" |
| ;; |
| esac |
| # Assume that glibc is being used and so __cxa_atexit is provided. |
| default_use_cxa_atexit=yes |
| ;; |
| *-*-netbsd*) |
| tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic" |
| gas=yes |
| gnu_ld=yes |
| |
| # NetBSD 2.0 and later get POSIX threads enabled by default. |
| # Allow them to be explicitly enabled on any other version. |
| case ${enable_threads} in |
| "") |
| case ${target} in |
| *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*) |
| thread_file='posix' |
| tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS" |
| ;; |
| esac |
| ;; |
| yes | posix) |
| thread_file='posix' |
| tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS" |
| ;; |
| esac |
| |
| # NetBSD 1.7 and later are set up to use GCC's crtstuff for |
| # ELF configurations. We will clear extra_parts in the |
| # a.out configurations. |
| case ${target} in |
| *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*) |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o" |
| ;; |
| esac |
| |
| # NetBSD 2.0 and later provide __cxa_atexit(), which we use by |
| # default (unless overridden by --disable-__cxa_atexit). |
| case ${target} in |
| *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*) |
| default_use_cxa_atexit=yes |
| ;; |
| esac |
| ;; |
| *-*-openbsd*) |
| tmake_file="t-libc-ok t-openbsd t-libgcc-pic" |
| case ${enable_threads} in |
| yes) |
| thread_file='posix' |
| tmake_file="${tmake_file} t-openbsd-thread" |
| ;; |
| esac |
| case ${target} in |
| *-*-openbsd2.*|*-*-openbsd3.[012]) |
| tm_defines="${tm_defines} HAS_LIBC_R=1" ;; |
| esac |
| ;; |
| *-*-rtems*) |
| case ${enable_threads} in |
| yes) thread_file='rtems' ;; |
| esac |
| ;; |
| *-*-vxworks*) |
| tmake_file=t-vxworks |
| tm_file="${tm_file} elfos.h svr4.h" |
| xm_defines=POSIX |
| extra_options="${extra_options} vxworks.opt" |
| case ${enable_threads} in |
| no) ;; |
| "" | yes | vxworks) thread_file='vxworks' ;; |
| *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;; |
| esac |
| ;; |
| *-*-elf) |
| # Assume that newlib is being used and so __cxa_atexit is provided. |
| default_use_cxa_atexit=yes |
| ;; |
| esac |
| |
| case ${target} in |
| # Support site-specific machine types. |
| *local*) |
| rest=`echo ${target} | sed -e "s/$cpu_type-//"` |
| tm_file=${cpu_type}/$rest.h |
| if test -f $srcdir/config/${cpu_type}/xm-$rest.h |
| then xm_file=${cpu_type}/xm-$rest.h |
| fi |
| if test -f $srcdir/config/${cpu_type}/t-$rest |
| then tmake_file=${cpu_type}/t-$rest |
| fi |
| ;; |
| alpha*-*-unicosmk*) |
| use_collect2=yes |
| tm_file="${tm_file} alpha/unicosmk.h" |
| |
| # Don't include t-ieee for now because we don't support that yet |
| # tmake_file="alpha/t-ieee" |
| tmake_file="alpha/t-unicosmk" |
| use_fixproto=yes |
| ;; |
| alpha*-*-linux*) |
| tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h" |
| target_cpu_default="MASK_GAS" |
| tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux" |
| ;; |
| alpha*-*-gnu*) |
| target_cpu_default="MASK_GAS" |
| tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee" |
| ;; |
| alpha*-*-freebsd*) |
| tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h" |
| target_cpu_default="MASK_GAS" |
| tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee" |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o" |
| ;; |
| alpha*-*-netbsd*) |
| tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h" |
| target_cpu_default="MASK_GAS" |
| tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee" |
| ;; |
| alpha*-*-openbsd*) |
| tm_defines="${tm_defines} OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT" |
| tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h" |
| # default x-alpha is only appropriate for dec-osf. |
| target_cpu_default="MASK_GAS" |
| tmake_file="alpha/t-alpha alpha/t-ieee" |
| ;; |
| alpha*-dec-osf[45]*) |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| if test x$gas != xyes |
| then |
| extra_passes="mips-tfile mips-tdump" |
| fi |
| use_collect2=yes |
| tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4" |
| tm_file="${tm_file} alpha/osf.h" |
| extra_headers=va_list.h |
| case ${target} in |
| *-*-osf4*) |
| # Define TARGET_SUPPORT_ARCH except on 4.0a. |
| case ${target} in |
| *-*-osf4.0a) ;; |
| *) tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1" |
| esac |
| ;; |
| *-*-osf5*) |
| tm_file="${tm_file} alpha/osf5.h" |
| tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1" |
| ;; |
| esac |
| case ${enable_threads} in |
| "" | yes | posix) |
| thread_file='posix' |
| tmake_file="${tmake_file} alpha/t-osf-pthread" |
| ;; |
| esac |
| ;; |
| alpha64-dec-*vms*) |
| tm_file="${tm_file} alpha/vms.h alpha/vms64.h" |
| xm_file="alpha/xm-vms.h" |
| tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee" |
| prefix=/gnu |
| local_prefix=/gnu |
| ;; |
| alpha*-dec-*vms*) |
| tm_file="${tm_file} alpha/vms.h" |
| xm_file=alpha/xm-vms.h |
| tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee" |
| prefix=/gnu |
| local_prefix=/gnu |
| ;; |
| arc-*-elf*) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| extra_parts="crtinit.o crtfini.o" |
| use_fixproto=yes |
| ;; |
| arm-*-coff* | armel-*-coff*) |
| tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h" |
| tmake_file="arm/t-arm arm/t-arm-coff" |
| ;; |
| arm-semi-aof | armel-semi-aof) |
| tm_file="arm/semiaof.h arm/aof.h arm/arm.h" |
| tmake_file="arm/t-arm arm/t-semi" |
| ;; |
| arm-wrs-vxworks) |
| tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h" |
| tmake_file="${tmake_file} arm/t-arm arm/t-vxworks" |
| ;; |
| arm*-*-freebsd*|strongarm*-*-freebsd*) |
| tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h" |
| tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf" |
| ;; |
| arm*-*-netbsdelf*) |
| tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h" |
| tmake_file="${tmake_file} arm/t-arm arm/t-netbsd" |
| ;; |
| arm*-*-netbsd*) |
| tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h" |
| tmake_file="t-netbsd arm/t-arm arm/t-netbsd" |
| extra_parts="" |
| use_collect2=yes |
| ;; |
| arm*-*-linux*) # ARM GNU/Linux with ELF |
| tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h" |
| tmake_file="${tmake_file} t-linux arm/t-arm" |
| case ${target} in |
| arm*-*-linux-*eabi) |
| tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h" |
| tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi" |
| # The BPABI long long divmod functions return a 128-bit value in |
| # registers r0-r3. Correctly modeling that requires the use of |
| # TImode. |
| need_64bit_hwint=yes |
| # The EABI requires the use of __cxa_atexit. |
| default_use_cxa_atexit=yes |
| ;; |
| *) |
| tmake_file="$tmake_file arm/t-linux" |
| ;; |
| esac |
| tm_file="$tm_file arm/aout.h arm/arm.h" |
| ;; |
| arm*-*-uclinux*) # ARM ucLinux |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h" |
| tmake_file="arm/t-arm arm/t-arm-elf" |
| ;; |
| arm*-*-ecos-elf) |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h" |
| tmake_file="arm/t-arm arm/t-arm-elf" |
| ;; |
| arm*-*-eabi* | arm*-*-symbianelf* ) |
| # The BPABI long long divmod functions return a 128-bit value in |
| # registers r0-r3. Correctly modeling that requires the use of |
| # TImode. |
| need_64bit_hwint=yes |
| default_use_cxa_atexit=yes |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h" |
| tmake_file="arm/t-arm arm/t-arm-elf" |
| case ${target} in |
| arm*-*-eabi*) |
| tmake_file="${tmake_file} arm/t-bpabi" |
| ;; |
| arm*-*-symbianelf*) |
| tm_file="${tm_file} arm/symbian.h" |
| # We do not include t-bpabi for Symbian OS because the system |
| # provides its own implementation of the BPABI functions. |
| tmake_file="${tmake_file} arm/t-symbian" |
| ;; |
| esac |
| tm_file="${tm_file} arm/aout.h arm/arm.h" |
| ;; |
| arm*-*-rtems*) |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h" |
| tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems" |
| ;; |
| arm*-*-elf | ep9312-*-elf) |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h" |
| tmake_file="arm/t-arm arm/t-arm-elf" |
| ;; |
| # APPLE LOCAL begin ARM darwin target |
| arm*-*-darwin*) |
| extra_options="${extra_options} arm/darwin.opt" |
| tm_file="${tm_file} arm/darwin.h" |
| tmake_file="${tmake_file} arm/t-slibgcc-iphoneos" |
| extra_headers="arm_neon.h" |
| ;; |
| # APPLE LOCAL end ARM darwin target |
| arm*-wince-pe*) |
| tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h" |
| tmake_file="arm/t-arm arm/t-wince-pe" |
| extra_options="${extra_options} arm/pe.opt" |
| extra_objs="pe.o" |
| ;; |
| arm-*-pe*) |
| tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h" |
| tmake_file="arm/t-arm arm/t-pe" |
| extra_options="${extra_options} arm/pe.opt" |
| extra_objs="pe.o" |
| ;; |
| arm*-*-kaos*) |
| tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h" |
| tmake_file="arm/t-arm arm/t-arm-elf" |
| ;; |
| avr-*-rtems*) |
| tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h" |
| tmake_file="avr/t-avr t-rtems avr/t-rtems" |
| ;; |
| avr-*-*) |
| tm_file="avr/avr.h dbxelf.h" |
| use_fixproto=yes |
| ;; |
| bfin*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h" |
| tmake_file=bfin/t-bfin-elf |
| use_collect2=no |
| ;; |
| bfin*-uclinux*) |
| tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/uclinux.h" |
| tmake_file=bfin/t-bfin-elf |
| use_collect2=no |
| ;; |
| bfin*-rtems*) |
| tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h" |
| tmake_file="bfin/t-bfin t-rtems bfin/t-rtems" |
| ;; |
| bfin*-*) |
| tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h" |
| tmake_file=bfin/t-bfin |
| use_collect2=no |
| ;; |
| c4x-*-rtems* | tic4x-*-rtems*) |
| tmake_file="c4x/t-c4x t-rtems c4x/t-rtems" |
| tm_file="c4x/c4x.h c4x/rtems.h rtems.h" |
| c_target_objs="c4x-c.o" |
| cxx_target_objs="c4x-c.o" |
| ;; |
| c4x-* | tic4x-*) |
| tmake_file=c4x/t-c4x |
| c_target_objs="c4x-c.o" |
| cxx_target_objs="c4x-c.o" |
| ;; |
| cris-*-aout) |
| tm_file="dbxelf.h ${tm_file} cris/aout.h" |
| gas=yes |
| tmake_file="cris/t-cris cris/t-aout" |
| extra_options="${extra_options} cris/aout.opt" |
| ;; |
| cris-*-elf | cris-*-none) |
| tm_file="dbxelf.h elfos.h ${tm_file}" |
| tmake_file="cris/t-cris cris/t-elfmulti" |
| gas=yes |
| extra_options="${extra_options} cris/elf.opt" |
| ;; |
| cris-*-linux*) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h" |
| # We need to avoid using t-linux, so override default tmake_file |
| tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux" |
| extra_options="${extra_options} cris/linux.opt" |
| ;; |
| crx-*-elf) |
| tm_file="elfos.h ${tm_file}" |
| extra_parts="crtbegin.o crtend.o" |
| use_collect2=no |
| ;; |
| fr30-*-elf) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| tmake_file=fr30/t-fr30 |
| extra_parts="crti.o crtn.o crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| frv-*-elf) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h" |
| tmake_file=frv/t-frv |
| use_fixproto=yes |
| ;; |
| frv-*-*linux*) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \ |
| linux.h frv/linux.h frv/frv-abi.h" |
| tmake_file="${tmake_file} frv/t-frv frv/t-linux" |
| ;; |
| h8300-*-rtemscoff*) |
| tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems" |
| tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h" |
| ;; |
| h8300-*-rtems*) |
| tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems" |
| tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h" |
| ;; |
| h8300-*-elf*) |
| tmake_file="h8300/t-h8300 h8300/t-elf" |
| tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h" |
| use_fixproto=yes |
| ;; |
| h8300-*-*) |
| tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h" |
| use_fixproto=yes |
| ;; |
| hppa*64*-*-linux* | parisc*64*-*-linux*) |
| target_cpu_default="MASK_PA_11|MASK_PA_20" |
| tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \ |
| pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h" |
| tmake_file="${tmake_file} pa/t-linux64" |
| gas=yes gnu_ld=yes |
| need_64bit_hwint=yes |
| ;; |
| hppa*-*-linux* | parisc*-*-linux*) |
| target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS" |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \ |
| pa/pa32-regs.h pa/pa32-linux.h" |
| tmake_file="${tmake_file} pa/t-linux" |
| # Set the libgcc version number |
| if test x$sjlj = x1; then |
| tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver" |
| else |
| tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver" |
| fi |
| ;; |
| # port not yet contributed. |
| #hppa*-*-openbsd*) |
| # target_cpu_default="MASK_PA_11" |
| # ;; |
| hppa1.1-*-pro*) |
| target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT" |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \ |
| pa/pa-pro-end.h libgloss.h" |
| tmake_file="pa/t-pro" |
| ;; |
| hppa1.1-*-osf*) |
| target_cpu_default="MASK_PA_11" |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h" |
| tmake_file="pa/t-pa" |
| use_collect2=yes |
| ;; |
| hppa1.1-*-bsd*) |
| target_cpu_default="MASK_PA_11" |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h" |
| tmake_file="pa/t-pa" |
| use_collect2=yes |
| ;; |
| hppa[12]*-*-hpux10*) |
| case ${target} in |
| hppa1.1-*-* | hppa2*-*-*) |
| target_cpu_default="MASK_PA_11" |
| ;; |
| esac |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \ |
| pa/pa-hpux.h pa/pa-hpux10.h" |
| extra_options="${extra_options} pa/pa-hpux.opt" |
| case ${target} in |
| *-*-hpux10.[1-9]*) |
| tm_file="${tm_file} pa/pa-hpux1010.h" |
| extra_options="${extra_options} pa/pa-hpux1010.opt" |
| ;; |
| esac |
| tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib" |
| case ${enable_threads} in |
| "") |
| if test x$have_pthread_h = xyes ; then |
| tmake_file="${tmake_file} pa/t-dce-thr" |
| fi |
| ;; |
| yes | dce) |
| tmake_file="${tmake_file} pa/t-dce-thr" |
| ;; |
| esac |
| # Set the libgcc version number |
| if test x$sjlj = x1; then |
| tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver" |
| else |
| tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver" |
| fi |
| use_collect2=yes |
| use_fixproto=yes |
| gas=yes |
| ;; |
| hppa*64*-*-hpux11*) |
| target_cpu_default="MASK_PA_11|MASK_PA_20" |
| if test x$gnu_ld = xyes |
| then |
| target_cpu_default="${target_cpu_default}|MASK_GNU_LD" |
| fi |
| tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \ |
| pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \ |
| pa/pa-hpux11.h" |
| case ${target} in |
| *-*-hpux11.[1-9]*) |
| tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h" |
| extra_options="${extra_options} pa/pa-hpux1111.opt" |
| ;; |
| *) |
| tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h" |
| ;; |
| esac |
| extra_options="${extra_options} pa/pa-hpux.opt \ |
| pa/pa-hpux1010.opt pa/pa64-hpux.opt" |
| need_64bit_hwint=yes |
| tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib" |
| # Set the libgcc version number |
| if test x$sjlj = x1; then |
| tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver" |
| else |
| tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver" |
| fi |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \ |
| libgcc_stub.a" |
| case x${enable_threads} in |
| x | xyes | xposix ) |
| thread_file=posix |
| ;; |
| esac |
| gas=yes |
| ;; |
| hppa[12]*-*-hpux11*) |
| case ${target} in |
| hppa1.1-*-* | hppa2*-*-*) |
| target_cpu_default="MASK_PA_11" |
| ;; |
| esac |
| tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \ |
| pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h" |
| extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt" |
| case ${target} in |
| *-*-hpux11.[1-9]*) |
| tm_file="${tm_file} pa/pa-hpux1111.h" |
| extra_options="${extra_options} pa/pa-hpux1111.opt" |
| ;; |
| esac |
| tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib" |
| # Set the libgcc version number |
| if test x$sjlj = x1; then |
| tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver" |
| else |
| tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver" |
| fi |
| case x${enable_threads} in |
| x | xyes | xposix ) |
| thread_file=posix |
| ;; |
| esac |
| use_collect2=yes |
| gas=yes |
| ;; |
| i[34567]86-*-darwin*) |
| need_64bit_hwint=yes |
| # APPLE LOCAL mainline |
| # Deleted a comment here. |
| # APPLE LOCAL mainline |
| with_cpu=${with_cpu:-core2} |
| # APPLE LOCAL Macintosh alignment 2002-2-19 --ff |
| extra_options="${extra_options} i386/darwin.opt" |
| # APPLE LOCAL 4099000 5681645 |
| tmake_file="${tmake_file} t-slibgcc-darwin i386/t-darwin" |
| ;; |
| x86_64-*-darwin*) |
| # APPLE LOCAL mainline |
| # Deleted with_arch |
| # APPLE LOCAL mainline |
| with_cpu=${with_cpu:-core2} |
| # APPLE LOCAL Macintosh alignment 2002-2-19 --ff |
| extra_options="${extra_options} i386/darwin.opt" |
| tmake_file="t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin" |
| tm_file="${tm_file} ${cpu_type}/darwin64.h" |
| ;; |
| i[34567]86-*-elf*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h" |
| tmake_file="i386/t-i386elf t-svr4" |
| use_fixproto=yes |
| ;; |
| i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*) |
| if test x$gas = xyes |
| then |
| tm_file="${tm_file} usegas.h" |
| fi |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h" |
| tmake_file=t-svr4 |
| extra_parts="crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| i[34567]86-*-aout*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h" |
| use_fixproto=yes |
| ;; |
| i[34567]86-*-beoself* | i[34567]86-*-beos*) |
| tmake_file='i386/t-beos i386/t-crtpic' |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h" |
| extra_parts='crtbegin.o crtend.o' |
| ;; |
| i[34567]86-*-freebsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h" |
| ;; |
| x86_64-*-freebsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h" |
| ;; |
| i[34567]86-*-netbsdelf*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h" |
| ;; |
| i[34567]86-*-netbsd*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h" |
| tmake_file=t-netbsd |
| extra_parts="" |
| use_collect2=yes |
| ;; |
| x86_64-*-netbsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h" |
| ;; |
| i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123]) |
| tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h" |
| # needed to unconfuse gdb |
| tmake_file="t-libc-ok t-openbsd i386/t-openbsd" |
| # we need collect2 until our bug is fixed... |
| use_collect2=yes |
| ;; |
| i[34567]86-*-openbsd*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h" |
| # LLVM local |
| tm_file="${tm_file} openbsd.h openbsd-libpthread.h i386/openbsdelf.h" |
| gas=yes |
| gnu_ld=yes |
| ;; |
| # LLVM local begin |
| x86_64-*-openbsd*) |
| tm_file="i386/biarch64.h i386/i386.h i386/unix.h i386/att.h dbxelf.h elfos.h openbsd.h openbsd-libpthread.h i386/x86-64.h i386/openbsd64.h" |
| tm_file="${tm_file} exec-stack.h" |
| tmake_file="t-libc-ok t-openbsd i386/t-openbsd" |
| ;; |
| # LLVM local end |
| i[34567]86-*-coff*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h" |
| use_fixproto=yes |
| ;; |
| i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu) |
| # Intel 80386's running GNU/* |
| # with ELF format using glibc 2 |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h" |
| case ${target} in |
| i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h i386/knetbsd-gnu.h" ;; |
| i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;; |
| esac |
| tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtfm t-dfprules" |
| ;; |
| x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \ |
| i386/x86-64.h i386/linux64.h" |
| case ${target} in |
| x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;; |
| x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;; |
| esac |
| tmake_file="${tmake_file} i386/t-linux64 i386/t-crtfm t-dfprules" |
| ;; |
| i[34567]86-*-gnu*) |
| ;; |
| i[34567]86-pc-msdosdjgpp*) |
| xm_file=i386/xm-djgpp.h |
| tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h" |
| tmake_file=i386/t-djgpp |
| extra_options="${extra_options} i386/djgpp.opt" |
| gnu_ld=yes |
| gas=yes |
| ;; |
| i[34567]86-*-lynxos*) |
| xm_defines=POSIX |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h" |
| tmake_file="i386/t-crtstuff t-lynx" |
| extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o" |
| extra_options="${extra_options} lynx.opt" |
| thread_file=lynx |
| gnu_ld=yes |
| gas=yes |
| ;; |
| i[3456x]86-*-netware*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h" |
| tmake_file=i386/t-netware |
| extra_objs=netware.o |
| case /${with_ld} in |
| */nwld) |
| extra_objs="$extra_objs nwld.o" |
| tm_file="${tm_file} i386/nwld.h" |
| tmake_file="${tmake_file} i386/t-nwld" |
| extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def" |
| ;; |
| esac |
| case x${enable_threads} in |
| x | xyes | xposix) thread_file='posix';; |
| xnks) thread_file='nks';; |
| xno) ;; |
| *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;; |
| esac |
| ;; |
| i[34567]86-*-nto-qnx*) |
| tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h" |
| tmake_file=i386/t-nto |
| gnu_ld=yes |
| gas=yes |
| ;; |
| i[34567]86-*-rtems*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h" |
| extra_parts="crtbegin.o crtend.o crti.o crtn.o" |
| tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems" |
| ;; |
| i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5 |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h" |
| if test x$gas = xyes |
| then |
| tm_file="usegas.h ${tm_file}" |
| fi |
| tmake_file=i386/t-sco5 |
| extra_parts="crtbegin.o crtend.o" |
| extra_options="${extra_options} i386/sco5.opt" |
| use_fixproto=yes |
| ;; |
| i[34567]86-*-solaris2*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h" |
| case ${target} in |
| *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*) |
| tm_file="${tm_file} sol2-6.h" |
| ;; |
| *-*-solaris2.1[0-9]*) |
| tm_file="${tm_file} sol2-10.h" |
| ;; |
| esac |
| tm_file="${tm_file} i386/sol2.h" |
| tmake_file="t-sol2 i386/t-sol2 t-svr4" |
| c_target_objs="sol2-c.o" |
| cxx_target_objs="sol2-c.o" |
| extra_objs="sol2.o" |
| tm_p_file="${tm_p_file} sol2-protos.h" |
| if test x$gnu_ld = xyes; then |
| tmake_file="$tmake_file t-slibgcc-elf-ver" |
| tm_defines="${tm_defines} TARGET_GNU_LD=1" |
| else |
| tmake_file="$tmake_file t-slibgcc-sld" |
| fi |
| if test x$gas = xyes; then |
| tm_file="usegas.h ${tm_file}" |
| fi |
| case ${target} in |
| *-*-solaris2.[789] | *-*-solaris2.1[0-9]*) |
| tm_file="$tm_file tm-dwarf2.h" |
| ;; |
| esac |
| case ${target} in |
| *-*-solaris2.1[0-9]*) |
| tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h" |
| tm_defines="${tm_defines} TARGET_BI_ARCH=1" |
| tmake_file="$tmake_file i386/t-sol2-10" |
| need_64bit_hwint=yes |
| # FIXME: -m64 for i[34567]86-*-* should be allowed just |
| # like -m32 for x86_64-*-*. |
| case X"${with_cpu}" in |
| # APPLE LOCAL mainline |
| Xgeneric|Xcore2|Xnocona|Xx86-64|Xk8|Xopteron|Xathlon64|Xathlon-fx) |
| ;; |
| X) |
| with_cpu=generic |
| ;; |
| *) |
| echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2 |
| # APPLE LOCAL mainline |
| echo "generic core2 nocona x86-64 k8 opteron athlon64 athlon-fx" 1>&2 |
| exit 1 |
| ;; |
| esac |
| # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as |
| # part of the base system. |
| extra_parts="gmon.o crtbegin.o crtend.o" |
| ;; |
| *) |
| extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o" |
| ;; |
| esac |
| case ${enable_threads}:${have_pthread_h}:${have_thread_h} in |
| "":yes:* | yes:yes:* ) |
| case ${target} in |
| *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*) |
| thread_file=posix95 |
| ;; |
| *) |
| thread_file=posix |
| ;; |
| esac |
| ;; |
| "":*:yes | yes:*:yes ) |
| thread_file=solaris |
| ;; |
| esac |
| ;; |
| i[34567]86-*-sysv5*) # Intel x86 on System V Release 5 |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h" |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| tmake_file="i386/t-crtpic t-svr4" |
| extra_parts="crtbegin.o crtend.o" |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| use_fixproto=yes |
| ;; |
| i[34567]86-*-sysv4*) # Intel 80386's running system V.4 |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h" |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| tmake_file="i386/t-crtpic t-svr4" |
| extra_parts="crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae) |
| tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/att.h vx-common.h" |
| case ${target} in |
| *-vxworksae*) |
| tm_file="${tm_file} vxworksae.h i386/vxworksae.h" |
| tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae" |
| ;; |
| *) |
| tm_file="${tm_file} vxworks.h i386/vxworks.h" |
| tmake_file="${tmake_file} i386/t-vxworks" |
| ;; |
| esac |
| ;; |
| i[34567]86-*-pe | i[34567]86-*-cygwin*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h" |
| xm_file=i386/xm-cygwin.h |
| tmake_file="i386/t-cygwin i386/t-cygming" |
| target_gtfiles="\$(srcdir)/config/i386/winnt.c" |
| extra_options="${extra_options} i386/cygming.opt" |
| extra_objs="winnt.o winnt-stubs.o" |
| c_target_objs=cygwin2.o |
| cxx_target_objs="cygwin2.o winnt-cxx.o" |
| extra_gcc_objs=cygwin1.o |
| extra_parts="crtbegin.o crtend.o" |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| ;; |
| # LLVM LOCAL begin mainline |
| i[34567]86-*-mingw32* | x86_64-*-mingw32*) |
| # LLVM LOCAL end mainline |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h" |
| xm_file=i386/xm-mingw32.h |
| tmake_file="i386/t-cygming i386/t-mingw32" |
| target_gtfiles="\$(srcdir)/config/i386/winnt.c" |
| extra_options="${extra_options} i386/cygming.opt" |
| extra_objs="winnt.o winnt-stubs.o" |
| # LLVM LOCAL begin mainline |
| cxx_target_objs=winnt-cxx.o |
| default_use_cxa_atexit=yes |
| # LLVM LOCAL end mainline |
| extra_parts="crtbegin.o crtend.o" |
| case ${enable_threads} in |
| "" | yes | win32) |
| thread_file='win32' |
| tmake_file="${tmake_file} i386/t-gthr-win32" |
| ;; |
| esac |
| case ${target} in |
| *mingw32crt*) |
| tm_file="${tm_file} i386/crtdll.h" |
| ;; |
| *mingw32msv* | *mingw32*) |
| ;; |
| esac |
| ;; |
| i[34567]86-*-uwin*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h" |
| tmake_file="i386/t-cygwin i386/t-uwin" |
| extra_objs=winnt.o |
| extra_options="${extra_options} i386/cygming.opt" |
| target_gtfiles="\$(srcdir)/config/i386/winnt.c" |
| if test x$enable_threads = xyes; then |
| thread_file='win32' |
| fi |
| use_fixproto=yes |
| ;; |
| i[34567]86-*-interix3*) |
| tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h" |
| tmake_file="i386/t-interix" |
| extra_objs=winnt.o |
| target_gtfiles="\$(srcdir)/config/i386/winnt.c" |
| if test x$enable_threads = xyes ; then |
| thread_file='posix' |
| fi |
| if test x$stabs = xyes ; then |
| tm_file="${tm_file} dbxcoff.h" |
| fi |
| ;; |
| i[34567]86-*-kaos*) |
| tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h" |
| tmake_file="i386/t-i386elf t-svr4" |
| ;; |
| ia64*-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h" |
| tmake_file="ia64/t-ia64" |
| target_cpu_default="0" |
| if test x$gas = xyes |
| then |
| target_cpu_default="${target_cpu_default}|MASK_GNU_AS" |
| fi |
| if test x$gnu_ld = xyes |
| then |
| target_cpu_default="${target_cpu_default}|MASK_GNU_LD" |
| fi |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o" |
| use_fixproto=yes |
| ;; |
| ia64*-*-freebsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h" |
| target_cpu_default="MASK_GNU_AS|MASK_GNU_LD" |
| tmake_file="${tmake_file} ia64/t-ia64" |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o" |
| ;; |
| ia64*-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h" |
| tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc" |
| if test x$with_system_libunwind != xyes ; then |
| tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind" |
| fi |
| target_cpu_default="MASK_GNU_AS|MASK_GNU_LD" |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o" |
| ;; |
| ia64*-*-hpux*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h" |
| tmake_file="ia64/t-ia64 ia64/t-hpux" |
| target_cpu_default="MASK_GNU_AS" |
| case x$enable_threads in |
| xyes | xposix ) |
| thread_file=posix |
| ;; |
| esac |
| use_collect2=no |
| c_target_objs="ia64-c.o" |
| cxx_target_objs="ia64-c.o" |
| extra_options="${extra_options} ia64/ilp32.opt" |
| # If we decide to run fixproto we should define FIXPROTO_DEFINES |
| # in ia64/t-hpux, and also fix the definition of putenv in |
| # sys-protos.h (const char not char). |
| ;; |
| iq2000*-*-elf*) |
| tm_file="svr4.h elfos.h iq2000/iq2000.h" |
| tmake_file=iq2000/t-iq2000 |
| out_file=iq2000/iq2000.c |
| md_file=iq2000/iq2000.md |
| use_fixproto=yes |
| ;; |
| m32r-*-elf*) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| extra_parts="crtinit.o crtfini.o" |
| use_fixproto=yes |
| ;; |
| m32rle-*-elf*) |
| tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}" |
| extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o" |
| use_fixproto=yes |
| ;; |
| m32r-*-linux*) |
| tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h" |
| # We override the tmake_file for linux -- why? |
| tmake_file="t-slibgcc-elf-ver m32r/t-linux" |
| gnu_ld=yes |
| use_fixproto=yes |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| ;; |
| m32rle-*-linux*) |
| tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h" |
| # We override the tmake_file for linux -- why? |
| tmake_file="t-slibgcc-elf-ver m32r/t-linux" |
| gnu_ld=yes |
| use_fixproto=yes |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| ;; |
| # m68hc11 and m68hc12 share the same machine description. |
| m68hc11-*-*|m6811-*-*) |
| tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h" |
| tm_p_file="m68hc11/m68hc11-protos.h" |
| md_file="m68hc11/m68hc11.md" |
| out_file="m68hc11/m68hc11.c" |
| tmake_file="m68hc11/t-m68hc11-gas" |
| use_fixproto=yes |
| ;; |
| m68hc12-*-*|m6812-*-*) |
| tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h" |
| tm_p_file="m68hc11/m68hc11-protos.h" |
| md_file="m68hc11/m68hc11.md" |
| out_file="m68hc11/m68hc11.c" |
| tmake_file="m68hc11/t-m68hc11-gas" |
| extra_options="${extra_options} m68hc11/m68hc11.opt" |
| use_fixproto=yes |
| ;; |
| m68k-*-aout*) |
| tmake_file=m68k/t-m68kbare |
| tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h" |
| ;; |
| m68k-*-coff*) |
| tmake_file=m68k/t-m68kbare |
| tm_defines="${tm_defines} MOTOROLA USE_GAS" |
| tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h" |
| use_fixproto=yes |
| ;; |
| m68020-*-elf* | m68k-*-elf*) |
| tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h" |
| tm_defines="${tm_defines} MOTOROLA USE_GAS" |
| tmake_file=m68k/t-m68kelf |
| extra_parts="crtbegin.o crtend.o" |
| ;; |
| m68010-*-netbsdelf* | m68k*-*-netbsdelf*) |
| tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h" |
| tm_defines="${tm_defines} MOTOROLA USE_GAS" |
| case ${target} in |
| m68010*) |
| target_cpu_default="0" |
| ;; |
| *) |
| target_cpu_default="MASK_68020|MASK_68881|MASK_BITFIELD" |
| ;; |
| esac |
| ;; |
| m68k*-*-openbsd*) |
| # needed to unconfuse gdb |
| tm_defines="${tm_defines} OBSD_OLD_GAS TARGET_DEFAULT=(MASK_68020|MASK_68881|MASK_BITFIELD)" |
| tm_file="m68k/m68k.h openbsd.h m68k/openbsd.h" |
| tmake_file="t-libc-ok t-openbsd m68k/t-openbsd" |
| # we need collect2 until our bug is fixed... |
| use_collect2=yes |
| ;; |
| m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux with uClibc |
| tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux.h" |
| tm_defines="${tm_defines} MOTOROLA USE_GAS" |
| tmake_file=m68k/t-uclinux |
| use_fixproto=no |
| ;; |
| m68k-*-linux*) # Motorola m68k's running GNU/Linux |
| # with ELF format using glibc 2 |
| # aka the GNU/Linux C library 6. |
| tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h" |
| extra_options="${extra_options} m68k/ieee.opt" |
| tm_defines="${tm_defines} MOTOROLA USE_GAS" |
| # if not configured with --enable-sjlj-exceptions, bump the |
| # libgcc version number |
| if test x$sjlj != x1; then |
| tmake_file="$tmake_file m68k/t-slibgcc-elf-ver" |
| fi |
| ;; |
| m68k-*-rtems*) |
| tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems" |
| tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h" |
| tm_defines="${tm_defines} MOTOROLA USE_GAS" |
| extra_parts="crtbegin.o crtend.o" |
| ;; |
| mcore-*-elf) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h" |
| tmake_file=mcore/t-mcore |
| use_fixproto=yes |
| ;; |
| mcore-*-pe*) |
| tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h" |
| tmake_file=mcore/t-mcore-pe |
| use_fixproto=yes |
| ;; |
| mips-sgi-irix[56]*) |
| tm_file="elfos.h ${tm_file} mips/iris.h" |
| tmake_file="mips/t-iris mips/t-slibgcc-irix" |
| target_cpu_default="MASK_ABICALLS" |
| case ${target} in |
| *-*-irix5*) |
| tm_file="${tm_file} mips/iris5.h" |
| ;; |
| |
| *-*-irix6*) |
| tm_file="${tm_file} mips/iris6.h" |
| tmake_file="${tmake_file} mips/t-iris6" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32" |
| ;; |
| esac |
| if test "x$stabs" = xyes |
| then |
| tm_file="${tm_file} dbx.h mips/dbxmdebug.h" |
| fi |
| if test "x$gnu_ld" = xyes |
| then |
| tm_defines="${tm_defines} IRIX_USING_GNU_LD" |
| fi |
| # if test x$enable_threads = xyes; then |
| # thread_file='irix' |
| # fi |
| use_fixproto=yes |
| ;; |
| mips*-*-netbsd*) # NetBSD/mips, either endian. |
| target_cpu_default="MASK_ABICALLS" |
| tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h" |
| ;; |
| mips64*-*-linux*) |
| tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h" |
| tmake_file="${tmake_file} mips/t-linux64" |
| tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32" |
| gnu_ld=yes |
| gas=yes |
| ;; |
| mips*-*-linux*) # Linux MIPS, either endian. |
| tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h" |
| case ${target} in |
| mipsisa32*-*) |
| target_cpu_default="MASK_SOFT_FLOAT" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32" |
| ;; |
| esac |
| ;; |
| mips*-*-openbsd*) |
| tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS" |
| target_cpu_default="MASK_ABICALLS" |
| tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h" |
| case ${target} in |
| mips*el-*-openbsd*) |
| tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";; |
| *) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";; |
| esac |
| ;; |
| mipsisa32-*-elf* | mipsisa32el-*-elf*) |
| tm_file="elfos.h ${tm_file} mips/elf.h" |
| tmake_file=mips/t-isa3264 |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI" |
| use_fixproto=yes |
| ;; |
| mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*) |
| tm_file="elfos.h ${tm_file} mips/elf.h" |
| tmake_file=mips/t-isa3264 |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI" |
| use_fixproto=yes |
| ;; |
| mipsisa64-*-elf* | mipsisa64el-*-elf*) |
| tm_file="elfos.h ${tm_file} mips/elf.h" |
| tmake_file=mips/t-isa3264 |
| target_cpu_default="MASK_64BIT|MASK_FLOAT64" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI" |
| use_fixproto=yes |
| ;; |
| mipsisa64sr71k-*-elf*) |
| tm_file="elfos.h ${tm_file} mips/elf.h" |
| tmake_file=mips/t-sr71k |
| target_cpu_default="MASK_64BIT|MASK_FLOAT64" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI" |
| use_fixproto=yes |
| ;; |
| mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*) |
| tm_file="elfos.h ${tm_file} mips/elf.h" |
| tmake_file="mips/t-elf mips/t-sb1" |
| target_cpu_default="MASK_64BIT|MASK_FLOAT64" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64" |
| use_fixproto=yes |
| ;; |
| mips-*-elf* | mipsel-*-elf*) |
| tm_file="elfos.h ${tm_file} mips/elf.h" |
| tmake_file=mips/t-elf |
| use_fixproto=yes |
| ;; |
| mips64-*-elf* | mips64el-*-elf*) |
| tm_file="elfos.h ${tm_file} mips/elf.h" |
| tmake_file=mips/t-elf |
| target_cpu_default="MASK_64BIT|MASK_FLOAT64" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64" |
| use_fixproto=yes |
| ;; |
| mips64vr-*-elf* | mips64vrel-*-elf*) |
| tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h" |
| tmake_file=mips/t-vr |
| use_fixproto=yes |
| ;; |
| mips64orion-*-elf* | mips64orionel-*-elf*) |
| tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h" |
| tmake_file=mips/t-elf |
| target_cpu_default="MASK_64BIT|MASK_FLOAT64" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64" |
| use_fixproto=yes |
| ;; |
| mips*-*-rtems*) |
| tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h" |
| tmake_file="mips/t-elf t-rtems mips/t-rtems" |
| ;; |
| mips-wrs-vxworks) |
| # We want vxworks.h after mips/elf.h, which unfortunately means we |
| # have to redo the tm_file list from scratch. |
| tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h" |
| tmake_file="${tmake_file} mips/t-vxworks" |
| ;; |
| mips-wrs-windiss) # Instruction-level simulator for VxWorks. |
| xm_defines=POSIX |
| tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h" |
| tmake_file="${tmake_file} mips/t-elf" |
| thread_file= |
| ;; |
| mipstx39-*-elf* | mipstx39el-*-elf*) |
| tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h" |
| tmake_file=mips/t-r3900 |
| use_fixproto=yes |
| ;; |
| mipsallegrex*) |
| tm_file="elfos.h ${tm_file} mips/elf.h" |
| tmake_file=mips/t-allegrex |
| target_cpu_default="MASK_SINGLE_FLOAT|MASK_DIVIDE_BREAKS" |
| tm_defines="${tm_defines} MIPS_ISA_DEFAULT=2 MIPS_CPU_STRING_DEFAULT=\\\"allegrex\\\" MIPS_ABI_DEFAULT=ABI_EABI" |
| case ${target} in |
| mipsallegrex*-psp-elf*) |
| tm_file="${tm_file} mips/psp.h" |
| ;; |
| esac |
| use_fixproto=yes |
| ;; |
| mmix-knuth-mmixware) |
| need_64bit_hwint=yes |
| ;; |
| mn10300-*-*) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| use_collect2=no |
| use_fixproto=yes |
| ;; |
| mt-*-elf) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| tmake_file="${tmake_file} mt/t-mt" |
| ;; |
| ns32k-*-netbsdelf*) |
| echo "GCC does not yet support the ${target} target"; exit 1 |
| ;; |
| ns32k-*-netbsd*) |
| tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h" |
| # On NetBSD, the headers are already okay, except for math.h. |
| tmake_file="t-netbsd ns32k/t-ns32k" |
| extra_parts="" |
| use_collect2=yes |
| ;; |
| pdp11-*-bsd) |
| tm_file="${tm_file} pdp11/2bsd.h" |
| use_fixproto=yes |
| ;; |
| pdp11-*-*) |
| use_fixproto=yes |
| ;; |
| # port not yet contributed |
| #powerpc-*-openbsd*) |
| # tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit " |
| # extra_headers= |
| # ;; |
| powerpc64-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h" |
| test x$with_cpu != x || cpu_is_64bit=yes |
| test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h" |
| # LLVM LOCAL begin |
| # Disable biarch builds for powerpc64-linux for now. There is no support for biarch |
| # builds in llvm-gcc yet. With this change it is possible to create non-biarch builds |
| # for powerpc64-linux which was not possible before. So this change has two effects: |
| # 1. Disable (broken) biarch builds |
| # 2. Allow non-biarch builds. |
| tm_file="${tm_file} rs6000/linux64.h" |
| # LLVM LOCAL end |
| if test x${enable_secureplt} = xyes; then |
| tm_file="rs6000/secureplt.h ${tm_file}" |
| fi |
| extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt" |
| tmake_file="t-dfprules rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp" |
| ;; |
| powerpc64-*-gnu*) |
| tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h" |
| extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt" |
| tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp" |
| ;; |
| powerpc-*-beos*) |
| tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-beos" |
| extra_headers= |
| use_fixproto=yes |
| ;; |
| powerpc-*-darwin*) |
| # APPLE LOCAL ARM 5681645 |
| tmake_file="${tmake_file} t-slibgcc-darwin" |
| extra_options="${extra_options} rs6000/darwin.opt" |
| # APPLE LOCAL mainline candidate 2006-06-22 4512244 |
| extra_parts="${extra_parts} crt2.o" |
| case ${target} in |
| # LLVM LOCAL begin |
| *-darwin1[0-9]*) |
| tm_file="${tm_file} rs6000/darwin8.h" |
| ;; |
| *-darwin[8-9]*) |
| # LLVM LOCAL end |
| tmake_file="${tmake_file} rs6000/t-darwin8" |
| tm_file="${tm_file} rs6000/darwin8.h" |
| ;; |
| *-darwin7*) |
| tm_file="${tm_file} rs6000/darwin7.h" |
| ;; |
| *-darwin[0-6]*) |
| ;; |
| esac |
| extra_headers=altivec.h |
| ;; |
| powerpc64-*-darwin*) |
| tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h" |
| # APPLE LOCAL ARM 5681645 |
| tmake_file="${tmake_file} t-slibgcc-darwin" |
| extra_options="${extra_options} ${cpu_type}/darwin.opt" |
| # We're omitting t-darwin8 to avoid building any multilibs |
| extra_headers=altivec.h |
| ;; |
| powerpc*-*-freebsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| ;; |
| powerpc-*-netbsd*) |
| tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h" |
| tmake_file="${tmake_file} rs6000/t-netbsd" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| ;; |
| powerpc-*-chorusos*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| case ${enable_threads} in |
| yes | posix) |
| thread_file='posix' |
| ;; |
| esac |
| use_fixproto=yes |
| ;; |
| powerpc-*-eabispe*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-spe rs6000/t-ppccomm" |
| ;; |
| powerpc-*-eabisimaltivec*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm" |
| ;; |
| powerpc-*-eabisim*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" |
| ;; |
| powerpc-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" |
| use_fixproto=yes |
| ;; |
| powerpc-*-eabialtivec*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm" |
| ;; |
| powerpc-*-eabi*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" |
| ;; |
| powerpc-*-rtems*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm" |
| ;; |
| powerpc-*-linux*altivec*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" |
| ;; |
| powerpc-*-linux*spe*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" |
| ;; |
| powerpc-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="t-dfprules rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" |
| case ${enable_targets}:${cpu_is_64bit} in |
| *powerpc64* | all:* | *:yes) |
| if test x$cpu_is_64bit = xyes; then |
| tm_file="${tm_file} rs6000/default64.h" |
| fi |
| tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h" |
| tmake_file="$tmake_file rs6000/t-linux64" |
| extra_options="${extra_options} rs6000/linux64.opt" |
| ;; |
| *) |
| tm_file="${tm_file} rs6000/linux.h" |
| ;; |
| esac |
| if test x${enable_secureplt} = xyes; then |
| tm_file="rs6000/secureplt.h ${tm_file}" |
| fi |
| ;; |
| powerpc-*-gnu-gnualtivec*) |
| tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm" |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| ;; |
| powerpc-*-gnu*) |
| tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| if test x$enable_threads = xyes; then |
| thread_file='posix' |
| fi |
| ;; |
| powerpc-wrs-vxworks|powerpc-wrs-vxworksae) |
| # We want vxworks.h after rs6000/sysv4.h, which unfortunately |
| # means we have to redo the tm_file list from scratch. |
| tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h" |
| tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| extra_headers=ppc-asm.h |
| case ${target} in |
| *-vxworksae*) |
| tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksae.h" |
| tmake_file="${tmake_file} rs6000/t-vxworksae" |
| ;; |
| *-vxworks*) |
| tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h" |
| ;; |
| esac |
| ;; |
| powerpc-wrs-windiss*) # Instruction-level simulator for VxWorks. |
| tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| thread_file="" |
| use_fixproto=yes |
| ;; |
| powerpc-*-lynxos*) |
| xm_defines=POSIX |
| tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h" |
| tmake_file="t-lynx rs6000/t-lynx" |
| extra_options="${extra_options} rs6000/sysv4.opt lynx.opt" |
| extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o" |
| extra_options="${extra_options} lynx.opt" |
| thread_file=lynx |
| gnu_ld=yes |
| gas=yes |
| ;; |
| powerpcle-*-sysv*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| use_fixproto=yes |
| ;; |
| powerpcle-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| use_fixproto=yes |
| ;; |
| powerpcle-*-eabisim*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| ;; |
| powerpcle-*-eabi*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| ;; |
| powerpc-*-kaos*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| ;; |
| powerpcle-*-kaos*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm" |
| extra_options="${extra_options} rs6000/sysv4.opt" |
| ;; |
| rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*) |
| tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h" |
| tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-newas" |
| extra_options="${extra_options} rs6000/aix41.opt" |
| use_collect2=yes |
| extra_headers= |
| use_fixproto=yes |
| ;; |
| rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*) |
| tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h" |
| tmake_file=rs6000/t-aix43 |
| extra_options="${extra_options} rs6000/aix64.opt" |
| use_collect2=yes |
| thread_file='aix' |
| extra_headers= |
| ;; |
| rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*) |
| tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h" |
| extra_options="${extra_options} rs6000/aix64.opt" |
| tmake_file=rs6000/t-aix43 |
| use_collect2=yes |
| thread_file='aix' |
| extra_headers= |
| ;; |
| rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*) |
| tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h" |
| tmake_file=rs6000/t-aix52 |
| extra_options="${extra_options} rs6000/aix64.opt" |
| use_collect2=yes |
| thread_file='aix' |
| extra_headers= |
| ;; |
| s390-*-linux*) |
| tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h" |
| tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux" |
| ;; |
| s390x-*-linux*) |
| tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h" |
| tm_p_file=s390/s390-protos.h |
| md_file=s390/s390.md |
| extra_modes=s390/s390-modes.def |
| out_file=s390/s390.c |
| tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux s390/t-linux64" |
| ;; |
| s390x-ibm-tpf*) |
| tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h" |
| tm_p_file=s390/s390-protos.h |
| md_file=s390/s390.md |
| extra_modes=s390/s390-modes.def |
| out_file=s390/s390.c |
| extra_parts="crtbeginS.o crtendS.o" |
| tmake_file="s390/t-crtstuff s390/t-tpf" |
| thread_file='tpf' |
| extra_options="${extra_options} s390/tpf.opt" |
| ;; |
| score-*-elf) |
| tm_file="dbxelf.h elfos.h score/elf.h score/score.h" |
| tmake_file=score/t-score-elf |
| extra_objs="score-mdaux.o" |
| ;; |
| sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \ |
| sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \ |
| sh-*-linux* | sh[346lbe]*-*-linux* | \ |
| sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \ |
| sh64-*-netbsd* | sh64l*-*-netbsd*) |
| tmake_file="${tmake_file} sh/t-sh sh/t-elf" |
| if test x${with_endian} = x; then |
| case ${target} in |
| sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;; |
| shbe-*-* | sheb-*-*) with_endian=big,little ;; |
| sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;; |
| shl* | sh64l* | sh*-*-linux* | \ |
| sh5l* | sh-superh-elf) with_endian=little,big ;; |
| sh[1234]*-*-*) with_endian=big ;; |
| *) with_endian=big,little ;; |
| esac |
| fi |
| case ${with_endian} in |
| big|little) tmake_file="${tmake_file} sh/t-1e" ;; |
| big,little|little,big) ;; |
| *) echo "with_endian=${with_endian} not supported."; exit 1 ;; |
| esac |
| case ${with_endian} in |
| little*) tm_file="sh/little.h ${tm_file}" ;; |
| esac |
| tm_file="${tm_file} dbxelf.h elfos.h" |
| case ${target} in |
| sh*-*-netbsd*) ;; |
| *) tm_file="${tm_file} svr4.h" ;; |
| esac |
| tm_file="${tm_file} sh/elf.h" |
| case ${target} in |
| sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux" |
| tm_file="${tm_file} linux.h sh/linux.h" ;; |
| sh*-*-kaos*) tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h" |
| ;; |
| sh*-*-netbsd*) tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;; |
| sh*-superh-elf) if test x$with_libgloss != xno; then |
| with_libgloss=yes |
| tm_file="${tm_file} sh/newlib.h" |
| fi |
| tm_file="${tm_file} sh/embed-elf.h" |
| extra_options="${extra_options} sh/superh.opt" ;; |
| *) if test x$with_newlib = xyes \ |
| && test x$with_libgloss = xyes; then |
| tm_file="${tm_file} sh/newlib.h" |
| fi |
| tm_file="${tm_file} sh/embed-elf.h" ;; |
| esac |
| case ${target} in |
| sh5*-*-netbsd*) |
| # SHmedia, 32-bit ABI |
| tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd" |
| ;; |
| sh64*-netbsd*) |
| # SHmedia, 64-bit ABI |
| tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64" |
| ;; |
| *-*-netbsd) |
| tmake_file="${tmake_file} sh/t-netbsd" |
| ;; |
| sh64*-*-linux*) |
| tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64" |
| tm_file="${tm_file} sh/sh64.h" |
| extra_headers="shmedia.h ushmedia.h sshmedia.h" |
| ;; |
| sh64*) |
| tmake_file="${tmake_file} sh/t-sh64" |
| tm_file="${tm_file} sh/sh64.h" |
| extra_headers="shmedia.h ushmedia.h sshmedia.h" |
| ;; |
| *-*-symbianelf*) |
| tmake_file="sh/t-symbian" |
| tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h" |
| extra_objs="symbian.o" |
| extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o" |
| ;; |
| esac |
| # sed el/eb endian suffixes away to avoid confusion with sh[23]e |
| case `echo ${target} | sed 's/e[lb]-/-/'` in |
| sh64*-*-netbsd*) sh_cpu_target=sh5-64media ;; |
| sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;; |
| sh4a_single_only*) sh_cpu_target=sh4a-single-only ;; |
| sh4a_single*) sh_cpu_target=sh4a-single ;; |
| sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;; |
| sh4al) sh_cpu_target=sh4al ;; |
| sh4a*) sh_cpu_target=sh4a ;; |
| sh4_single_only*) sh_cpu_target=sh4-single-only ;; |
| sh4_single*) sh_cpu_target=sh4-single ;; |
| sh4_nofpu*) sh_cpu_target=sh4-nofpu ;; |
| sh4* | sh-superh-*) sh_cpu_target=sh4 ;; |
| sh3e*) sh_cpu_target=sh3e ;; |
| sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;; |
| sh2a_single_only*) sh_cpu_target=sh2a-single-only ;; |
| sh2a_single*) sh_cpu_target=sh2a-single ;; |
| sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;; |
| sh2a*) sh_cpu_target=sh2a ;; |
| sh2e*) sh_cpu_target=sh2e ;; |
| sh2*) sh_cpu_target=sh2 ;; |
| *) sh_cpu_target=sh1 ;; |
| esac |
| # did the user say --without-fp ? |
| if test x$with_fp = xno; then |
| case ${sh_cpu_target} in |
| sh5-*media) sh_cpu_target=${sh_cpu_target}-nofpu ;; |
| sh4al | sh1) ;; |
| sh4a* ) sh_cpu_target=sh4a-nofpu ;; |
| sh4*) sh_cpu_target=sh4-nofpu ;; |
| sh3*) sh_cpu_target=sh3 ;; |
| sh2a*) sh_cpu_target=sh2a-nofpu ;; |
| sh2*) sh_cpu_target=sh2 ;; |
| *) echo --without-fp not available for $target: ignored |
| esac |
| tm_defines="$tm_defines STRICT_NOFPU=1" |
| fi |
| sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`" |
| case $sh_cpu_default in |
| sh5-64media-nofpu | sh5-64media | \ |
| sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \ |
| sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \ |
| sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \ |
| sh4-single-only | sh4-single | sh4-nofpu | sh4 | \ |
| sh3e | sh3 | sh2e | sh2 | sh1) ;; |
| "") sh_cpu_default=${sh_cpu_target} ;; |
| *) echo "with_cpu=$with_cpu not supported"; exit 1 ;; |
| esac |
| sh_multilibs=${with_multilib_list} |
| if test x${sh_multilibs} = x ; then |
| case ${target} in |
| sh64-superh-linux* | \ |
| sh[1234]*) sh_multilibs=${sh_cpu_target} ;; |
| sh64* | sh5*) sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;; |
| sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;; |
| sh*-*-linux*) sh_multilibs=m1,m3e,m4 ;; |
| sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;; |
| *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;; |
| esac |
| if test x$with_fp = xno; then |
| sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`" |
| fi |
| fi |
| target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_` |
| tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"' |
| sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[ ,/][ ,]*/ /g' -e 's/ $//' -e 's/^m/sh/' -e 's/ m/ sh/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-` |
| for sh_multilib in ${sh_multilibs}; do |
| case ${sh_multilib} in |
| sh1 | sh2 | sh2e | sh3 | sh3e | \ |
| sh4 | sh4-single | sh4-single-only | sh4-nofpu | \ |
| sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \ |
| sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \ |
| sh5-64media | sh5-64media-nofpu | \ |
| sh5-32media | sh5-32media-nofpu | \ |
| sh5-compact | sh5-compact-nofpu) |
| tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}" |
| tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1" |
| ;; |
| *) |
| echo "with_multilib_list=${sh_multilib} not supported." |
| exit 1 |
| ;; |
| esac |
| done |
| if test x${enable_incomplete_targets} = xyes ; then |
| tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1" |
| fi |
| use_fixproto=yes |
| ;; |
| sh-*-rtemscoff*) |
| tmake_file="sh/t-sh t-rtems sh/t-rtems" |
| tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h" |
| ;; |
| sh-*-rtems*) |
| tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems" |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h" |
| ;; |
| sh-wrs-vxworks) |
| tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks" |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h" |
| ;; |
| sh-*-*) |
| tm_file="${tm_file} dbxcoff.h sh/coff.h" |
| use_fixproto=yes |
| ;; |
| sparc-*-netbsdelf*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h" |
| extra_options="${extra_options} sparc/long-double-switch.opt" |
| ;; |
| sparc64-*-openbsd*) |
| tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h" |
| extra_options="${extra_options} sparc/little-endian.opt" |
| gas=yes gnu_ld=yes |
| with_cpu=ultrasparc |
| ;; |
| sparc-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h" |
| tmake_file="sparc/t-elf sparc/t-crtfm" |
| extra_parts="crti.o crtn.o crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| sparc-*-linux*) # SPARC's running GNU/Linux, libc6 |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h" |
| extra_options="${extra_options} sparc/long-double-switch.opt" |
| tmake_file="${tmake_file} sparc/t-linux sparc/t-crtfm" |
| ;; |
| sparc-*-rtems*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h" |
| tmake_file="sparc/t-elf sparc/t-crtfm t-rtems" |
| extra_parts="crti.o crtn.o crtbegin.o crtend.o" |
| ;; |
| sparc64-*-solaris2* | sparcv9-*-solaris2*) |
| tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h" |
| case ${target} in |
| *-*-solaris2.1[0-9]*) |
| tm_file="${tm_file} sol2-10.h" |
| ;; |
| esac |
| tm_file="${tm_file} sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h" |
| if test x$gnu_ld = xyes; then |
| tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h" |
| fi |
| if test x$gas = xyes; then |
| tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h" |
| fi |
| tm_file="${tm_file} tm-dwarf2.h" |
| tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm" |
| if test x$gnu_ld = xyes; then |
| tmake_file="$tmake_file t-slibgcc-elf-ver" |
| else |
| tmake_file="$tmake_file t-slibgcc-sld" |
| fi |
| c_target_objs="sol2-c.o" |
| cxx_target_objs="sol2-c.o" |
| extra_objs="sol2.o" |
| tm_p_file="${tm_p_file} sol2-protos.h" |
| extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o" |
| case ${enable_threads}:${have_pthread_h}:${have_thread_h} in |
| "":yes:* | yes:yes:* ) thread_file=posix ;; |
| "":*:yes | yes:*:yes ) thread_file=solaris ;; |
| esac |
| need_64bit_hwint=yes |
| ;; |
| sparc-*-solaris2*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h" |
| case ${target} in |
| *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*) |
| tm_file="${tm_file} sol2-6.h" |
| ;; |
| *-*-solaris2.1[0-9]*) |
| tm_file="${tm_file} sol2-10.h" |
| ;; |
| esac |
| tm_file="${tm_file} sparc/sol2.h" |
| if test x$gnu_ld = xyes; then |
| tm_file="${tm_file} sparc/sol2-gld.h" |
| fi |
| if test x$gas = xyes; then |
| tm_file="${tm_file} sparc/sol2-gas.h" |
| fi |
| tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm" |
| if test x$gnu_ld = xyes; then |
| tmake_file="$tmake_file t-slibgcc-elf-ver" |
| else |
| tmake_file="$tmake_file t-slibgcc-sld" |
| fi |
| case ${target} in |
| *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*) |
| if test x$gnu_ld = xno; then |
| tm_file="${tm_file} sparc/sol26-sld.h" |
| fi |
| ;; |
| *-*-solaris2.[789] | *-*-solaris2.1[0-9]*) |
| tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h" |
| if test x$gnu_ld = xyes; then |
| tm_file="${tm_file} sparc/sol2-gld-bi.h" |
| fi |
| if test x$gas = xyes; then |
| tm_file="${tm_file} sparc/sol2-gas-bi.h" |
| fi |
| tm_file="${tm_file} tm-dwarf2.h" |
| tmake_file="$tmake_file sparc/t-sol2-64" |
| need_64bit_hwint=yes |
| test x$with_cpu != x || with_cpu=v9 |
| ;; |
| esac |
| c_target_objs="sol2-c.o" |
| cxx_target_objs="sol2-c.o" |
| extra_objs="sol2.o" |
| tm_p_file="${tm_p_file} sol2-protos.h" |
| extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o" |
| case ${enable_threads}:${have_pthread_h}:${have_thread_h} in |
| "":yes:* | yes:yes:* ) |
| case ${target} in |
| *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*) |
| thread_file=posix95 |
| ;; |
| *) |
| thread_file=posix |
| ;; |
| esac |
| ;; |
| "":*:yes | yes:*:yes ) |
| thread_file=solaris |
| ;; |
| esac |
| ;; |
| sparc-*-sysv4*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h" |
| tmake_file=t-svr4 |
| extra_parts="crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| sparc64-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h" |
| extra_options="${extra_options} sparc/little-endian.opt" |
| tmake_file="${tmake_file} sparc/t-crtfm" |
| extra_parts="crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| sparc64-*-freebsd*|ultrasparc-*-freebsd*) |
| tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h" |
| extra_options="${extra_options} sparc/long-double-switch.opt" |
| tmake_file="${tmake_file} sparc/t-crtfm" |
| case "x$with_cpu" in |
| xultrasparc) ;; |
| x) with_cpu=ultrasparc ;; |
| *) echo "$with_cpu not supported for freebsd target"; exit 1 ;; |
| esac |
| need_64bit_hwint=yes |
| ;; |
| sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux |
| tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h" |
| extra_options="${extra_options} sparc/long-double-switch.opt" |
| tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm" |
| ;; |
| sparc64-*-netbsd*) |
| tm_file="sparc/biarch64.h ${tm_file}" |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h" |
| extra_options="${extra_options} sparc/long-double-switch.opt" |
| tmake_file="${tmake_file} sparc/t-netbsd64" |
| ;; |
| spu-*-elf*) |
| tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h" |
| tmake_file="spu/t-spu-elf" |
| extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h" |
| extra_modes=spu/spu-modes.def |
| c_target_objs="${c_target_objs} spu-c.o" |
| cxx_target_objs="${cxx_target_objs} spu-c.o" |
| ;; |
| strongarm-*-elf*) |
| tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h" |
| tmake_file="arm/t-arm arm/t-strongarm-elf" |
| out_file=arm/arm.c |
| md_file=arm/arm.md |
| extra_modes=arm/arm-modes.def |
| use_fixproto=yes |
| ;; |
| strongarm-*-pe) |
| tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h" |
| tmake_file="arm/t-arm arm/t-strongarm-pe" |
| out_file=arm/arm.c |
| md_file=arm/arm.md |
| extra_modes=arm/arm-modes.def |
| extra_options="${extra_options} arm/pe.opt" |
| extra_objs=pe.o |
| use_fixproto=yes |
| ;; |
| strongarm-*-kaos*) |
| tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h" |
| tmake_file="arm/t-arm arm/t-strongarm-elf" |
| out_file=arm/arm.c |
| md_file=arm/arm.md |
| extra_modes=arm/arm-modes.def |
| ;; |
| # LLVM LOCAL begin - TCE target |
| tce*-llvm*) |
| use_fixproto=yes |
| use_collect2=no |
| |
| # this didn't have any effect - tce.md was still needed |
| # md_file="" |
| |
| tm_p_file="" |
| tmake_file="tce/t-tce" |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| ;; |
| # LLVM LOCAL end - TCE target |
| v850e1-*-*) |
| target_cpu_default="TARGET_CPU_v850e1" |
| tm_file="dbxelf.h elfos.h svr4.h v850/v850.h" |
| tm_p_file=v850/v850-protos.h |
| tmake_file=v850/t-v850e |
| md_file=v850/v850.md |
| out_file=v850/v850.c |
| extra_options="${extra_options} v850/v850.opt" |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| use_collect2=no |
| c_target_objs="v850-c.o" |
| cxx_target_objs="v850-c.o" |
| use_fixproto=yes |
| ;; |
| v850e-*-*) |
| target_cpu_default="TARGET_CPU_v850e" |
| tm_file="dbxelf.h elfos.h svr4.h v850/v850.h" |
| tm_p_file=v850/v850-protos.h |
| tmake_file=v850/t-v850e |
| md_file=v850/v850.md |
| out_file=v850/v850.c |
| extra_options="${extra_options} v850/v850.opt" |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| use_collect2=no |
| c_target_objs="v850-c.o" |
| cxx_target_objs="v850-c.o" |
| use_fixproto=yes |
| ;; |
| v850-*-*) |
| target_cpu_default="TARGET_CPU_generic" |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| tmake_file=v850/t-v850 |
| if test x$stabs = xyes |
| then |
| tm_file="${tm_file} dbx.h" |
| fi |
| use_collect2=no |
| c_target_objs="v850-c.o" |
| cxx_target_objs="v850-c.o" |
| use_fixproto=yes |
| ;; |
| vax-*-bsd*) # VAXen running BSD |
| tm_file="${tm_file} vax/bsd.h" |
| tmake_file=vax/t-memfuncs |
| use_collect2=yes |
| use_fixproto=yes |
| ;; |
| vax-*-sysv*) # VAXen running system V |
| tm_file="${tm_file} vax/vaxv.h" |
| tmake_file=vax/t-memfuncs |
| use_fixproto=yes |
| ;; |
| vax-*-netbsdelf*) |
| tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h" |
| ;; |
| vax-*-netbsd*) |
| tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h" |
| tmake_file=t-netbsd |
| extra_parts="" |
| use_collect2=yes |
| ;; |
| vax-*-openbsd*) |
| tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h" |
| use_collect2=yes |
| ;; |
| vax-*-ultrix*) # VAXen running ultrix |
| tm_file="${tm_file} vax/ultrix.h" |
| tmake_file=vax/t-memfuncs |
| use_fixproto=yes |
| ;; |
| xscale-*-elf) |
| tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h" |
| tmake_file="arm/t-arm arm/t-xscale-elf" |
| out_file=arm/arm.c |
| md_file=arm/arm.md |
| extra_modes=arm/arm-modes.def |
| use_fixproto=yes |
| ;; |
| xscale-*-coff) |
| tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h" |
| tmake_file="arm/t-arm arm/t-xscale-coff" |
| out_file=arm/arm.c |
| md_file=arm/arm.md |
| extra_modes=arm/arm-modes.def |
| use_fixproto=yes |
| ;; |
| xstormy16-*-elf) |
| # For historical reasons, the target files omit the 'x'. |
| tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h" |
| tm_p_file=stormy16/stormy16-protos.h |
| md_file=stormy16/stormy16.md |
| out_file=stormy16/stormy16.c |
| extra_options=stormy16/stormy16.opt |
| tmake_file="stormy16/t-stormy16" |
| extra_parts="crtbegin.o crtend.o" |
| use_fixproto=yes |
| ;; |
| xtensa-*-elf*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h" |
| tmake_file="xtensa/t-xtensa xtensa/t-elf" |
| ;; |
| xtensa-*-linux*) |
| tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h" |
| tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux" |
| ;; |
| am33_2.0-*-linux*) |
| tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h" |
| tmake_file="${tmake_file} mn10300/t-linux" |
| gas=yes gnu_ld=yes |
| extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o" |
| use_collect2=no |
| ;; |
| m32c-*-elf*) |
| tm_file="dbxelf.h elfos.h svr4.h ${tm_file}" |
| c_target_objs="m32c-pragma.o" |
| cxx_target_objs="m32c-pragma.o" |
| use_fixproto=yes |
| ;; |
| *) |
| echo "*** Configuration ${target} not supported" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${target} in |
| i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1) |
| tmake_file="${tmake_file} i386/t-gmm_malloc" |
| ;; |
| i[34567]86-*-linux* | x86_64-*-linux*) |
| tmake_file="${tmake_file} i386/t-pmm_malloc" |
| ;; |
| i[34567]86-*-* | x86_64-*-*) |
| tmake_file="${tmake_file} i386/t-gmm_malloc" |
| ;; |
| esac |
| |
| # Support for --with-cpu and related options (and a few unrelated options, |
| # too). |
| case ${with_cpu} in |
| yes | no) |
| echo "--with-cpu must be passed a value" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| # If there is no $with_cpu option, try to infer one from ${target}. |
| # This block sets nothing except for with_cpu. |
| if test x$with_cpu = x ; then |
| case ${target} in |
| ep9312-*-*) |
| # A Cirrus ARM variant. |
| with_cpu="ep9312" |
| ;; |
| # APPLE LOCAL begin mainline 2006-04-19 4434601 |
| i386-*-*) |
| with_cpu=i386 |
| ;; |
| i486-*-*) |
| with_cpu=i486 |
| ;; |
| i586-*-*) |
| case ${target_noncanonical} in |
| k6_2-*) |
| with_cpu=k6-2 |
| ;; |
| k6_3-*) |
| with_cpu=k6-3 |
| ;; |
| k6-*) |
| with_cpu=k6 |
| ;; |
| pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*) |
| with_cpu=pentium-mmx |
| ;; |
| *) |
| with_cpu=pentium |
| ;; |
| esac |
| ;; |
| i686-*-* | i786-*-*) |
| case ${target_noncanonical} in |
| k8-*|opteron-*|athlon_64-*) |
| with_cpu=k8 |
| ;; |
| athlon_xp-*|athlon_mp-*|athlon_4-*) |
| with_cpu=athlon-4 |
| ;; |
| athlon_tbird-*|athlon-*) |
| with_cpu=athlon |
| ;; |
| pentium2-*) |
| with_cpu=pentium2 |
| ;; |
| pentium3-*|pentium3m-*) |
| with_cpu=pentium3 |
| ;; |
| pentium4-*|pentium4m-*) |
| with_cpu=pentium4 |
| ;; |
| prescott-*) |
| with_cpu=prescott |
| ;; |
| nocona-*) |
| with_cpu=nocona |
| ;; |
| # APPLE LOCAL begin mainline |
| core2-*) |
| with_cpu=core2 |
| ;; |
| # APPLE LOCAL end mainline |
| pentium_m-*) |
| with_cpu=pentium-m |
| ;; |
| pentiumpro-*) |
| with_cpu=pentiumpro |
| ;; |
| *) |
| with_cpu=generic |
| ;; |
| esac |
| ;; |
| x86_64-*-*) |
| case ${target_noncanonical} in |
| k8-*|opteron-*|athlon_64-*) |
| with_cpu=k8 |
| ;; |
| nocona-*) |
| with_cpu=nocona |
| ;; |
| # APPLE LOCAL begin mainline |
| core2-*) |
| with_cpu=core2 |
| ;; |
| # APPLE LOCAL end mainline |
| *) |
| with_cpu=generic |
| ;; |
| esac |
| ;; |
| # APPLE LOCAL end mainline 2006-04-19 4434601 |
| alphaev6[78]*-*-*) |
| with_cpu=ev67 |
| ;; |
| alphaev6*-*-*) |
| with_cpu=ev6 |
| ;; |
| alphapca56*-*-*) |
| with_cpu=pca56 |
| ;; |
| alphaev56*-*-*) |
| with_cpu=ev56 |
| ;; |
| alphaev5*-*-*) |
| with_cpu=ev5 |
| ;; |
| frv-*-*linux* | frv400-*-*linux*) |
| with_cpu=fr400 |
| ;; |
| frv550-*-*linux*) |
| with_cpu=fr550 |
| ;; |
| sparc*-*-*) |
| with_cpu="`echo ${target} | sed 's/-.*$//'`" |
| ;; |
| esac |
| fi |
| |
| # Similarly for --with-float |
| if test x$with_float = x; then |
| case ${target} in |
| ep9312-*-*) |
| with_float=hard |
| ;; |
| esac |
| fi |
| |
| # Similarly for --with-schedule. |
| if test x$with_schedule = x; then |
| case ${target} in |
| hppa1* | parisc1*) |
| # Override default PA8000 scheduling model. |
| with_schedule=7100LC |
| ;; |
| esac |
| fi |
| |
| # Validate and mark as valid any --with options supported |
| # by this target. In order to use a particular --with option |
| # you must list it in supported_defaults; validating the value |
| # is optional. This case statement should set nothing besides |
| # supported_defaults. |
| |
| supported_defaults= |
| case "${target}" in |
| alpha*-*-*) |
| supported_defaults="cpu tune" |
| for which in cpu tune; do |
| eval "val=\$with_$which" |
| case "$val" in |
| "" \ |
| | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \ |
| | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \ |
| | 21264a) |
| ;; |
| *) |
| echo "Unknown CPU used in --with-$which=$val" 1>&2 |
| exit 1 |
| ;; |
| esac |
| done |
| ;; |
| |
| arm*-*-*) |
| supported_defaults="arch cpu float tune fpu abi mode" |
| for which in cpu tune; do |
| # See if it matches any of the entries in arm-cores.def |
| eval "val=\$with_$which" |
| if [ x"$val" = x ] \ |
| || grep "^ARM_CORE(\"$val\"," \ |
| ${srcdir}/config/arm/arm-cores.def \ |
| > /dev/null; then |
| # Ok |
| new_val=`grep "^ARM_CORE(\"$val\"," \ |
| ${srcdir}/config/arm/arm-cores.def | \ |
| sed -e 's/^[^,]*,[ ]*//' | \ |
| sed -e 's/,.*$//'` |
| eval "target_${which}_cname=$new_val" |
| echo "For $val real value is $new_val" |
| true |
| else |
| echo "Unknown CPU used in --with-$which=$val" 1>&2 |
| exit 1 |
| fi |
| done |
| |
| case "$with_arch" in |
| # APPLE LOCAL begin ARM v7 support. |
| "" \ |
| | armv[23456] | armv2a | armv3m | armv4t | armv5t \ |
| | armv5te | armv6j |armv6k | armv6z | armv6zk \ |
| | armv7-a \ |
| | iwmmxt | ep9312) |
| # APPLE LOCAL end ARM v7 support. |
| # OK |
| ;; |
| *) |
| echo "Unknown arch used in --with-arch=$with_arch" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case "$with_float" in |
| "" \ |
| | soft | hard | softfp) |
| # OK |
| ;; |
| *) |
| echo "Unknown floating point type used in --with-float=$with_float" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case "$with_fpu" in |
| # APPLE LOCAL begin ARM v7 support, merge from Codesourcery. |
| "" \ |
| | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 | neon) |
| # APPLE LOCAL end ARM v7 support, merge from Codesourcery. |
| # OK |
| ;; |
| *) |
| echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1 |
| exit 1 |
| ;; |
| esac |
| |
| case "$with_abi" in |
| "" \ |
| | apcs-gnu | atpcs | aapcs | iwmmxt ) |
| #OK |
| ;; |
| *) |
| echo "Unknown ABI used in --with-abi=$with_abi" |
| exit 1 |
| ;; |
| esac |
| |
| case "$with_mode" in |
| "" \ |
| | arm | thumb ) |
| #OK |
| ;; |
| *) |
| echo "Unknown mode used in --with-mode=$with_mode" |
| exit 1 |
| ;; |
| esac |
| |
| if test "x$with_arch" != x && test "x$with_cpu" != x; then |
| echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2 |
| fi |
| ;; |
| |
| fr*-*-*linux*) |
| supported_defaults=cpu |
| case "$with_cpu" in |
| fr400) ;; |
| fr550) ;; |
| *) |
| echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| |
| m68k*-linux*) |
| supported_defaults="cpu" |
| case "$with_cpu" in |
| "" | "m68020" | "m68030" | "m68040" | "m68060" | "m68020-40" | "m68020-60") |
| # OK |
| ;; |
| *) |
| echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2 |
| echo "m68020 m68030 m68040 m68060 m68020-40 m68020-60" 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| |
| hppa*-*-* | parisc*-*-*) |
| supported_defaults="arch schedule" |
| |
| case "$with_arch" in |
| "" | 1.0 | 1.1 | 2.0) |
| # OK |
| ;; |
| *) |
| echo "Unknown architecture used in --with-arch=$with_arch" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case "$with_schedule" in |
| "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000) |
| # OK |
| ;; |
| *) |
| echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| |
| # APPLE LOCAL begin mainline 2006-04-19 4434601 |
| i[34567]86-*-* | x86_64-*-*) |
| supported_defaults="arch cpu tune" |
| for which in arch cpu tune; do |
| eval "val=\$with_$which" |
| case ${val} in |
| i386 | i486 \ |
| | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \ |
| | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \ |
| | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \ |
| | athlon-4 | athlon-xp | athlon-mp \ |
| | prescott | pentium-m | pentium4m | pentium3m) |
| case "${target}" in |
| x86_64-*-*) |
| echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2 |
| exit 1 |
| ;; |
| esac |
| # OK |
| ;; |
| # APPLE LOCAL mainline |
| "" | k8 | opteron | athlon64 | athlon-fx | nocona | core2 \ |
| | generic) |
| # OK |
| ;; |
| # APPLE LOCAL end mainline 2006-04-19 4434601 |
| *) |
| echo "Unknown CPU given in --with-$which=$val." 1>&2 |
| exit 1 |
| ;; |
| esac |
| done |
| ;; |
| |
| mips*-*-*) |
| supported_defaults="abi arch float tune divide" |
| |
| case ${with_float} in |
| "" | soft | hard) |
| # OK |
| ;; |
| *) |
| echo "Unknown floating point type used in --with-float=$with_float" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${with_abi} in |
| "" | 32 | o64 | n32 | 64 | eabi) |
| # OK |
| ;; |
| *) |
| echo "Unknown ABI used in --with-abi=$with_abi" 1>&2 |
| exit 1 |
| ;; |
| esac |
| |
| case ${with_divide} in |
| "" | breaks | traps) |
| # OK |
| ;; |
| *) |
| echo "Unknown division check type use in --with-divide=$with_divide" 1>&2 |
| exit 1 |
| esac |
| ;; |
| |
| mt-*-*) |
| supported_defaults="arch" |
| |
| case "$with_arch" in |
| "" \ |
| | ms1-64-001 \ |
| | ms1-16-002 \ |
| | ms1-16-003 \ |
| | ms2 \ |
| | "") |
| # OK |
| ;; |
| *) |
| echo "Unknown arch used in --with-arch=$with_arch" 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| |
| powerpc*-*-* | rs6000-*-*) |
| supported_defaults="cpu float tune" |
| |
| for which in cpu tune; do |
| eval "val=\$with_$which" |
| case ${val} in |
| default32 | default64) |
| with_which="with_$which" |
| eval $with_which= |
| ;; |
| 405cr) |
| tm_defines="${tm_defines} CONFIG_PPC405CR" |
| eval "with_$which=405" |
| ;; |
| "" | common \ |
| | power | power[23456] | powerpc | powerpc64 \ |
| | rios | rios1 | rios2 | rsc | rsc1 | rs64a \ |
| | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \ |
| | 601 | 602 | 603 | 603e | ec603e | 604 \ |
| | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \ |
| | 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5) |
| # OK |
| ;; |
| *) |
| echo "Unknown cpu used in --with-$which=$val." 1>&2 |
| exit 1 |
| ;; |
| esac |
| done |
| ;; |
| |
| s390*-*-*) |
| supported_defaults="arch mode tune" |
| |
| for which in arch tune; do |
| eval "val=\$with_$which" |
| case ${val} in |
| "" | g5 | g6 | z900 | z990 | z9-109) |
| # OK |
| ;; |
| *) |
| echo "Unknown cpu used in --with-$which=$val." 1>&2 |
| exit 1 |
| ;; |
| esac |
| done |
| |
| case ${with_mode} in |
| "" | esa | zarch) |
| # OK |
| ;; |
| *) |
| echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| |
| sh[123456ble]-*-* | sh-*-*) |
| supported_defaults="cpu" |
| case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in |
| "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu ) |
| # OK |
| ;; |
| m2a | m2a-single | m2a-single-only | m2a-nofpu) |
| ;; |
| m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al) |
| ;; |
| *) |
| echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2 |
| echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2 |
| echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2 |
| echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| sparc*-*-*) |
| supported_defaults="cpu float tune" |
| |
| for which in cpu tune; do |
| eval "val=\$with_$which" |
| case ${val} in |
| "" | sparc | sparcv9 | sparc64 | sparc86x \ |
| | v7 | cypress | v8 | supersparc | sparclite | f930 \ |
| | f934 | hypersparc | sparclite86x | sparclet | tsc701 \ |
| | v9 | ultrasparc | ultrasparc3 | niagara) |
| # OK |
| ;; |
| *) |
| echo "Unknown cpu used in --with-$which=$val" 1>&2 |
| exit 1 |
| ;; |
| esac |
| done |
| |
| case ${with_float} in |
| "" | soft | hard) |
| # OK |
| ;; |
| *) |
| echo "Unknown floating point type used in --with-float=$with_float" 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| |
| v850*-*-*) |
| supported_defaults=cpu |
| case ${with_cpu} in |
| "" | v850e | v850e1) |
| # OK |
| ;; |
| *) |
| echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| esac |
| |
| # Set some miscellaneous flags for particular targets. |
| target_cpu_default2= |
| case ${target} in |
| alpha*-*-*) |
| if test x$gas = xyes |
| then |
| target_cpu_default2="MASK_GAS" |
| fi |
| ;; |
| |
| arm*-*-*) |
| if test x$target_cpu_cname = x |
| then |
| target_cpu_default2=TARGET_CPU_generic |
| # LLVM LOCAL begin arm default cpu |
| case ${target} in |
| armv5-*-* | armv5t-*-*) |
| target_cpu_default2=TARGET_CPU_arm10tdmi |
| ;; |
| armv5e-*-* | armv5te-*-*) |
| target_cpu_default2=TARGET_CPU_arm1026ejs |
| ;; |
| armv6-*-* | armv6j-*-*) |
| target_cpu_default2=TARGET_CPU_arm1136js |
| ;; |
| armv6k-*-*) |
| target_cpu_default2=TARGET_CPU_mpcore |
| ;; |
| armv6z-*-* | armv6zk-*-*) |
| target_cpu_default2=TARGET_CPU_arm1176jzs |
| ;; |
| armv6t2-*-*) |
| target_cpu_default2=TARGET_CPU_arm1156t2s |
| ;; |
| armv7-*-* | armv7a-*-* | armv7l-*-* | armv7-a-*-*) |
| target_cpu_default2=TARGET_CPU_cortexa8 |
| ;; |
| armv7r-*-* | armv7-r-*-*) |
| target_cpu_default2=TARGET_CPU_cortexr4 |
| ;; |
| armv7m-*-* | armv7-m-*-*) |
| target_cpu_default2=TARGET_CPU_cortexm3 |
| ;; |
| esac |
| # LLVM LOCAL end arm default cpu |
| else |
| target_cpu_default2=TARGET_CPU_$target_cpu_cname |
| fi |
| ;; |
| |
| m68k*-linux*) |
| case "x$with_cpu" in |
| x) |
| # The most generic |
| target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)" |
| ;; |
| xm68020) |
| target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)" |
| ;; |
| xm68030) |
| target_cpu_default2="(MASK_68030|MASK_68020|MASK_68881|MASK_BITFIELD)" |
| ;; |
| xm68040) |
| target_cpu_default2="(MASK_68040|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)" |
| ;; |
| xm68060) |
| target_cpu_default2="(MASK_68060|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)" |
| ;; |
| xm68020-40) |
| target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040)" |
| ;; |
| xm68020-60) |
| target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040|MASK_68060)" |
| ;; |
| *) |
| echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2 |
| exit 1 |
| ;; |
| esac |
| ;; |
| |
| hppa*-*-* | parisc*-*-*) |
| target_cpu_default2="MASK_BIG_SWITCH" |
| if test x$gas = xyes |
| then |
| target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY" |
| fi |
| ;; |
| |
| mips*-*-*) |
| if test x$gnu_ld = xyes |
| then |
| target_cpu_default2="MASK_SPLIT_ADDRESSES" |
| fi |
| case ${target} in |
| mips*el-*-*) |
| tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines" |
| ;; |
| esac |
| if test "x$enable_gofast" = xyes |
| then |
| tm_defines="US_SOFTWARE_GOFAST $tm_defines" |
| tmake_file="mips/t-gofast $tmake_file" |
| else |
| tmake_file="mips/t-mips $tmake_file" |
| fi |
| ;; |
| |
| powerpc*-*-* | rs6000-*-*) |
| # FIXME: The PowerPC port uses the value set at compile time, |
| # although it's only cosmetic. |
| if test "x$with_cpu" != x |
| then |
| target_cpu_default2="\\\"$with_cpu\\\"" |
| fi |
| out_file=rs6000/rs6000.c |
| # LLVM LOCAL begin |
| out_cxx_file=rs6000/llvm-rs6000.cpp |
| c_target_objs="${c_target_objs} rs6000-c.o" |
| cxx_target_objs="${cxx_target_objs} rs6000-c.o" |
| tmake_file="rs6000/t-rs6000 ${tmake_file}" |
| |
| if test x$enable_e500_double = xyes |
| then |
| tm_file="$tm_file rs6000/e500-double.h" |
| fi |
| ;; |
| |
| sh[123456ble]*-*-* | sh-*-*) |
| c_target_objs="${c_target_objs} sh-c.o" |
| cxx_target_objs="${cxx_target_objs} sh-c.o" |
| ;; |
| |
| sparc*-*-*) |
| # Some standard aliases. |
| case x$with_cpu in |
| xsparc) |
| with_cpu=v7 |
| ;; |
| xsparcv9 | xsparc64) |
| with_cpu=v9 |
| ;; |
| esac |
| |
| # The SPARC port checks this value at compile-time. |
| target_cpu_default2="TARGET_CPU_$with_cpu" |
| ;; |
| v850*-*-*) |
| # FIXME: The v850 is "special" in that it does not support |
| # runtime CPU selection, only --with-cpu. |
| case "x$with_cpu" in |
| x) |
| ;; |
| xv850e) |
| target_cpu_default2="TARGET_CPU_$with_cpu" |
| ;; |
| esac |
| ;; |
| esac |
| |
| t= |
| all_defaults="abi cpu arch tune schedule float mode fpu divide" |
| for option in $all_defaults |
| do |
| eval "val=\$with_$option" |
| if test -n "$val"; then |
| case " $supported_defaults " in |
| *" $option "*) |
| ;; |
| *) |
| echo "This target does not support --with-$option." 2>&1 |
| echo "Valid --with options are: $supported_defaults" 2>&1 |
| exit 1 |
| ;; |
| esac |
| |
| if test "x$t" = x |
| then |
| t="{ \"$option\", \"$val\" }" |
| else |
| t="${t}, { \"$option\", \"$val\" }" |
| fi |
| fi |
| done |
| |
| if test "x$t" = x |
| then |
| configure_default_options="{ { NULL, NULL} }" |
| else |
| configure_default_options="{ ${t} }" |
| fi |
| |
| if test "$target_cpu_default2" != "" |
| then |
| if test "$target_cpu_default" != "" |
| then |
| target_cpu_default="(${target_cpu_default}|${target_cpu_default2})" |
| else |
| target_cpu_default=$target_cpu_default2 |
| fi |
| fi |
