| #! /bin/sh |
| # Guess values for system-dependent variables and create Makefiles. |
| # Generated by GNU Autoconf 2.61 for llvm-tv pre-release. |
| # |
| # Report bugs to <llvmbugs@cs.uiuc.edu>. |
| # |
| # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, |
| # 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. |
| # This configure script is free software; the Free Software Foundation |
| # gives unlimited permission to copy, distribute and modify it. |
| ## --------------------- ## |
| ## M4sh Initialization. ## |
| ## --------------------- ## |
| |
| # Be more Bourne compatible |
| DUALCASE=1; export DUALCASE # for MKS sh |
| if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| emulate sh |
| NULLCMD=: |
| # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| # is contrary to our usage. Disable this feature. |
| alias -g '${1+"$@"}'='"$@"' |
| setopt NO_GLOB_SUBST |
| else |
| case `(set -o) 2>/dev/null` in |
| *posix*) set -o posix ;; |
| esac |
| |
| fi |
| |
| |
| |
| |
| # PATH needs CR |
| # Avoid depending upon Character Ranges. |
| as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
| as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
| as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
| as_cr_digits='0123456789' |
| as_cr_alnum=$as_cr_Letters$as_cr_digits |
| |
| # The user is always right. |
| if test "${PATH_SEPARATOR+set}" != set; then |
| echo "#! /bin/sh" >conf$$.sh |
| echo "exit 0" >>conf$$.sh |
| chmod +x conf$$.sh |
| if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then |
| PATH_SEPARATOR=';' |
| else |
| PATH_SEPARATOR=: |
| fi |
| rm -f conf$$.sh |
| fi |
| |
| # Support unset when possible. |
| if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then |
| as_unset=unset |
| else |
| as_unset=false |
| fi |
| |
| |
| # IFS |
| # We need space, tab and new line, in precisely that order. Quoting is |
| # there to prevent editors from complaining about space-tab. |
| # (If _AS_PATH_WALK were called with IFS unset, it would disable word |
| # splitting by setting IFS to empty value.) |
| as_nl=' |
| ' |
| IFS=" "" $as_nl" |
| |
| # Find who we are. Look in the path if we contain no directory separator. |
| case $0 in |
| *[\\/]* ) as_myself=$0 ;; |
| *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| for as_dir in $PATH |
| do |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
| done |
| IFS=$as_save_IFS |
| |
| ;; |
| esac |
| # We did not find ourselves, most probably we were run as `sh COMMAND' |
| # in which case we are not to be found in the path. |
| if test "x$as_myself" = x; then |
| as_myself=$0 |
| fi |
| if test ! -f "$as_myself"; then |
| echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 |
| { (exit 1); exit 1; } |
| fi |
| |
| # Work around bugs in pre-3.0 UWIN ksh. |
| for as_var in ENV MAIL MAILPATH |
| do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| done |
| PS1='$ ' |
| PS2='> ' |
| PS4='+ ' |
| |
| # NLS nuisances. |
| for as_var in \ |
| LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ |
| LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ |
| LC_TELEPHONE LC_TIME |
| do |
| if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then |
| eval $as_var=C; export $as_var |
| else |
| ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| fi |
| done |
| |
| # Required to use basename. |
| if expr a : '\(a\)' >/dev/null 2>&1 && |
| test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| as_expr=expr |
| else |
| as_expr=false |
| fi |
| |
| if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then |
| as_basename=basename |
| else |
| as_basename=false |
| fi |
| |
| |
| # Name of the executable. |
| as_me=`$as_basename -- "$0" || |
| $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ |
| X"$0" : 'X\(//\)$' \| \ |
| X"$0" : 'X\(/\)' \| . 2>/dev/null || |
| echo X/"$0" | |
| sed '/^.*\/\([^/][^/]*\)\/*$/{ |
| s//\1/ |
| q |
| } |
| /^X\/\(\/\/\)$/{ |
| s//\1/ |
| q |
| } |
| /^X\/\(\/\).*/{ |
| s//\1/ |
| q |
| } |
| s/.*/./; q'` |
| |
| # CDPATH. |
| $as_unset CDPATH |
| |
| |
| if test "x$CONFIG_SHELL" = x; then |
| if (eval ":") 2>/dev/null; then |
| as_have_required=yes |
| else |
| as_have_required=no |
| fi |
| |
| if test $as_have_required = yes && (eval ": |
| (as_func_return () { |
| (exit \$1) |
| } |
| as_func_success () { |
| as_func_return 0 |
| } |
| as_func_failure () { |
| as_func_return 1 |
| } |
| as_func_ret_success () { |
| return 0 |
| } |
| as_func_ret_failure () { |
| return 1 |
| } |
| |
| exitcode=0 |
| if as_func_success; then |
| : |
| else |
| exitcode=1 |
| echo as_func_success failed. |
| fi |
| |
| if as_func_failure; then |
| exitcode=1 |
| echo as_func_failure succeeded. |
| fi |
| |
| if as_func_ret_success; then |
| : |
| else |
| exitcode=1 |
| echo as_func_ret_success failed. |
| fi |
| |
| if as_func_ret_failure; then |
| exitcode=1 |
| echo as_func_ret_failure succeeded. |
| fi |
| |
| if ( set x; as_func_ret_success y && test x = \"\$1\" ); then |
| : |
| else |
| exitcode=1 |
| echo positional parameters were not saved. |
| fi |
| |
| test \$exitcode = 0) || { (exit 1); exit 1; } |
| |
| ( |
| as_lineno_1=\$LINENO |
| as_lineno_2=\$LINENO |
| test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && |
| test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } |
| ") 2> /dev/null; then |
| : |
| else |
| as_candidate_shells= |
| as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH |
| do |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| case $as_dir in |
| /*) |
| for as_base in sh bash ksh sh5; do |
| as_candidate_shells="$as_candidate_shells $as_dir/$as_base" |
| done;; |
| esac |
| done |
| IFS=$as_save_IFS |
| |
| |
| for as_shell in $as_candidate_shells $SHELL; do |
| # Try only shells that exist, to save several forks. |
| if { test -f "$as_shell" || test -f "$as_shell.exe"; } && |
| { ("$as_shell") 2> /dev/null <<\_ASEOF |
| if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| emulate sh |
| NULLCMD=: |
| # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| # is contrary to our usage. Disable this feature. |
| alias -g '${1+"$@"}'='"$@"' |
| setopt NO_GLOB_SUBST |
| else |
| case `(set -o) 2>/dev/null` in |
| *posix*) set -o posix ;; |
| esac |
| |
| fi |
| |
| |
| : |
| _ASEOF |
| }; then |
| CONFIG_SHELL=$as_shell |
| as_have_required=yes |
| if { "$as_shell" 2> /dev/null <<\_ASEOF |
| if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| emulate sh |
| NULLCMD=: |
| # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| # is contrary to our usage. Disable this feature. |
| alias -g '${1+"$@"}'='"$@"' |
| setopt NO_GLOB_SUBST |
| else |
| case `(set -o) 2>/dev/null` in |
| *posix*) set -o posix ;; |
| esac |
| |
| fi |
| |
| |
| : |
| (as_func_return () { |
| (exit $1) |
| } |
| as_func_success () { |
| as_func_return 0 |
| } |
| as_func_failure () { |
| as_func_return 1 |
| } |
| as_func_ret_success () { |
| return 0 |
| } |
| as_func_ret_failure () { |
| return 1 |
| } |
| |
| exitcode=0 |
| if as_func_success; then |
| : |
| else |
| exitcode=1 |
| echo as_func_success failed. |
| fi |
| |
| if as_func_failure; then |
| exitcode=1 |
| echo as_func_failure succeeded. |
| fi |
| |
| if as_func_ret_success; then |
| : |
| else |
| exitcode=1 |
| echo as_func_ret_success failed. |
| fi |
| |
| if as_func_ret_failure; then |
| exitcode=1 |
| echo as_func_ret_failure succeeded. |
| fi |
| |
| if ( set x; as_func_ret_success y && test x = "$1" ); then |
| : |
| else |
| exitcode=1 |
| echo positional parameters were not saved. |
| fi |
| |
| test $exitcode = 0) || { (exit 1); exit 1; } |
| |
| ( |
| as_lineno_1=$LINENO |
| as_lineno_2=$LINENO |
| test "x$as_lineno_1" != "x$as_lineno_2" && |
| test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } |
| |
| _ASEOF |
| }; then |
| break |
| fi |
| |
| fi |
| |
| done |
| |
| if test "x$CONFIG_SHELL" != x; then |
| for as_var in BASH_ENV ENV |
| do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| done |
| export CONFIG_SHELL |
| exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} |
| fi |
| |
| |
| if test $as_have_required = no; then |
| echo This script requires a shell more modern than all the |
| echo shells that I found on your system. Please install a |
| echo modern shell, or manually run the script under such a |
| echo shell if you do have one. |
| { (exit 1); exit 1; } |
| fi |
| |
| |
| fi |
| |
| fi |
| |
| |
| |
| (eval "as_func_return () { |
| (exit \$1) |
| } |
| as_func_success () { |
| as_func_return 0 |
| } |
| as_func_failure () { |
| as_func_return 1 |
| } |
| as_func_ret_success () { |
| return 0 |
| } |
| as_func_ret_failure () { |
| return 1 |
| } |
| |
| exitcode=0 |
| if as_func_success; then |
| : |
| else |
| exitcode=1 |
| echo as_func_success failed. |
| fi |
| |
| if as_func_failure; then |
| exitcode=1 |
| echo as_func_failure succeeded. |
| fi |
| |
| if as_func_ret_success; then |
| : |
| else |
| exitcode=1 |
| echo as_func_ret_success failed. |
| fi |
| |
| if as_func_ret_failure; then |
| exitcode=1 |
| echo as_func_ret_failure succeeded. |
| fi |
| |
| if ( set x; as_func_ret_success y && test x = \"\$1\" ); then |
| : |
| else |
| exitcode=1 |
| echo positional parameters were not saved. |
| fi |
| |
| test \$exitcode = 0") || { |
| echo No shell found that supports shell functions. |
| echo Please tell autoconf@gnu.org about your system, |
| echo including any error possibly output before this |
| echo message |
| } |
| |
| |
| |
| as_lineno_1=$LINENO |
| as_lineno_2=$LINENO |
| test "x$as_lineno_1" != "x$as_lineno_2" && |
| test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { |
| |
| # Create $as_me.lineno as a copy of $as_myself, but with $LINENO |
| # uniformly replaced by the line number. The first 'sed' inserts a |
| # line-number line after each line using $LINENO; the second 'sed' |
| # does the real work. The second script uses 'N' to pair each |
| # line-number line with the line containing $LINENO, and appends |
| # trailing '-' during substitution so that $LINENO is not a special |
| # case at line end. |
| # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the |
| # scripts with optimization help from Paolo Bonzini. Blame Lee |
| # E. McMahon (1931-1989) for sed's syntax. :-) |
| sed -n ' |
| p |
| /[$]LINENO/= |
| ' <$as_myself | |
| sed ' |
| s/[$]LINENO.*/&-/ |
| t lineno |
| b |
| :lineno |
| N |
| :loop |
| s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ |
| t loop |
| s/-\n.*// |
| ' >$as_me.lineno && |
| chmod +x "$as_me.lineno" || |
| { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 |
| { (exit 1); exit 1; }; } |
| |
| # Don't try to exec as it changes $[0], causing all sort of problems |
| # (the dirname of $[0] is not the place where we might find the |
| # original and so on. Autoconf is especially sensitive to this). |
| . "./$as_me.lineno" |
| # Exit status is that of the last command. |
| exit |
| } |
| |
| |
| if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then |
| as_dirname=dirname |
| else |
| as_dirname=false |
| fi |
| |
| ECHO_C= ECHO_N= ECHO_T= |
| case `echo -n x` in |
| -n*) |
| case `echo 'x\c'` in |
| *c*) ECHO_T=' ';; # ECHO_T is single tab character. |
| *) ECHO_C='\c';; |
| esac;; |
| *) |
| ECHO_N='-n';; |
| esac |
| |
| if expr a : '\(a\)' >/dev/null 2>&1 && |
| test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| as_expr=expr |
| else |
| as_expr=false |
| fi |
| |
| rm -f conf$$ conf$$.exe conf$$.file |
| if test -d conf$$.dir; then |
| rm -f conf$$.dir/conf$$.file |
| else |
| rm -f conf$$.dir |
| mkdir conf$$.dir |
| fi |
| echo >conf$$.file |
| if ln -s conf$$.file conf$$ 2>/dev/null; then |
| as_ln_s='ln -s' |
| # ... but there are two gotchas: |
| # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. |
| # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. |
| # In both cases, we have to default to `cp -p'. |
| ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || |
| as_ln_s='cp -p' |
| elif ln conf$$.file conf$$ 2>/dev/null; then |
| as_ln_s=ln |
| else |
| as_ln_s='cp -p' |
| fi |
| rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file |
| rmdir conf$$.dir 2>/dev/null |
| |
| if mkdir -p . 2>/dev/null; then |
| as_mkdir_p=: |
| else |
| test -d ./-p && rmdir ./-p |
| as_mkdir_p=false |
| fi |
| |
| if test -x / >/dev/null 2>&1; then |
| as_test_x='test -x' |
| else |
| if ls -dL / >/dev/null 2>&1; then |
| as_ls_L_option=L |
| else |
| as_ls_L_option= |
| fi |
| as_test_x=' |
| eval sh -c '\'' |
| if test -d "$1"; then |
| test -d "$1/."; |
| else |
| case $1 in |
| -*)set "./$1";; |
| esac; |
| case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in |
| ???[sx]*):;;*)false;;esac;fi |
| '\'' sh |
| ' |
| fi |
| as_executable_p=$as_test_x |
| |
| # Sed expression to map a string onto a valid CPP name. |
| as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" |
| |
| # Sed expression to map a string onto a valid variable name. |
| as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" |
| |
| |
| |
| exec 7<&0 </dev/null 6>&1 |
| |
| # Name of the host. |
| # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, |
| # so uname gets run too. |
| ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` |
| |
| # |
| # Initializations. |
| # |
| ac_default_prefix=/usr/local |
| ac_clean_files= |
| ac_config_libobj_dir=. |
| LIBOBJS= |
| cross_compiling=no |
| subdirs= |
| MFLAGS= |
| MAKEFLAGS= |
| SHELL=${CONFIG_SHELL-/bin/sh} |
| |
| # Identity of this package. |
| PACKAGE_NAME='llvm-tv' |
| PACKAGE_TARNAME='-llvm-tv-' |
| PACKAGE_VERSION='pre-release' |
| PACKAGE_STRING='llvm-tv pre-release' |
| PACKAGE_BUGREPORT='llvmbugs@cs.uiuc.edu' |
| |
| ac_subst_vars='SHELL |
| PATH_SEPARATOR |
| PACKAGE_NAME |
| PACKAGE_TARNAME |
| PACKAGE_VERSION |
| PACKAGE_STRING |
| PACKAGE_BUGREPORT |
| exec_prefix |
| prefix |
| program_transform_name |
| bindir |
| sbindir |
| libexecdir |
| datarootdir |
| datadir |
| sysconfdir |
| sharedstatedir |
| localstatedir |
| includedir |
| oldincludedir |
| docdir |
| infodir |
| htmldir |
| dvidir |
| pdfdir |
| psdir |
| libdir |
| localedir |
| mandir |
| DEFS |
| ECHO_C |
| ECHO_N |
| ECHO_T |
| LIBS |
| build_alias |
| host_alias |
| target_alias |
| LLVM_SRC |
| LLVM_OBJ |
| POOLALLOC_SRC |
| POOLALLOC_OBJ |
| LIBOBJS |
| LTLIBOBJS' |
| ac_subst_files='' |
| ac_precious_vars='build_alias |
| host_alias |
| target_alias' |
| |
| |
| # Initialize some variables set by options. |
| ac_init_help= |
| ac_init_version=false |
| # The variables have the same names as the options, with |
| # dashes changed to underlines. |
| cache_file=/dev/null |
| exec_prefix=NONE |
| no_create= |
| no_recursion= |
| prefix=NONE |
| program_prefix=NONE |
| program_suffix=NONE |
| program_transform_name=s,x,x, |
| silent= |
| site= |
| srcdir= |
| verbose= |
| x_includes=NONE |
| x_libraries=NONE |
| |
| # Installation directory options. |
| # These are left unexpanded so users can "make install exec_prefix=/foo" |
| # and all the variables that are supposed to be based on exec_prefix |
| # by default will actually change. |
| # Use braces instead of parens because sh, perl, etc. also accept them. |
| # (The list follows the same order as the GNU Coding Standards.) |
| bindir='${exec_prefix}/bin' |
| sbindir='${exec_prefix}/sbin' |
| libexecdir='${exec_prefix}/libexec' |
| datarootdir='${prefix}/share' |
| datadir='${datarootdir}' |
| sysconfdir='${prefix}/etc' |
| sharedstatedir='${prefix}/com' |
| localstatedir='${prefix}/var' |
| includedir='${prefix}/include' |
| oldincludedir='/usr/include' |
| docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' |
| infodir='${datarootdir}/info' |
| htmldir='${docdir}' |
| dvidir='${docdir}' |
| pdfdir='${docdir}' |
| psdir='${docdir}' |
| libdir='${exec_prefix}/lib' |
| localedir='${datarootdir}/locale' |
| mandir='${datarootdir}/man' |
| |
| ac_prev= |
| ac_dashdash= |
| for ac_option |
| do |
| # If the previous option needs an argument, assign it. |
| if test -n "$ac_prev"; then |
| eval $ac_prev=\$ac_option |
| ac_prev= |
| continue |
| fi |
| |
| case $ac_option in |
| *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; |
| *) ac_optarg=yes ;; |
| esac |
| |
| # Accept the important Cygnus configure options, so we can diagnose typos. |
| |
| case $ac_dashdash$ac_option in |
| --) |
| ac_dashdash=yes ;; |
| |
| -bindir | --bindir | --bindi | --bind | --bin | --bi) |
| ac_prev=bindir ;; |
| -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) |
| bindir=$ac_optarg ;; |
| |
| -build | --build | --buil | --bui | --bu) |
| ac_prev=build_alias ;; |
| -build=* | --build=* | --buil=* | --bui=* | --bu=*) |
| build_alias=$ac_optarg ;; |
| |
| -cache-file | --cache-file | --cache-fil | --cache-fi \ |
| | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) |
| ac_prev=cache_file ;; |
| -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ |
| | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) |
| cache_file=$ac_optarg ;; |
| |
| --config-cache | -C) |
| cache_file=config.cache ;; |
| |
| -datadir | --datadir | --datadi | --datad) |
| ac_prev=datadir ;; |
| -datadir=* | --datadir=* | --datadi=* | --datad=*) |
| datadir=$ac_optarg ;; |
| |
| -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ |
| | --dataroo | --dataro | --datar) |
| ac_prev=datarootdir ;; |
| -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ |
| | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) |
| datarootdir=$ac_optarg ;; |
| |
| -disable-* | --disable-*) |
| ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` |
| # Reject names that are not valid shell variable names. |
| expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| { echo "$as_me: error: invalid feature name: $ac_feature" >&2 |
| { (exit 1); exit 1; }; } |
| ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` |
| eval enable_$ac_feature=no ;; |
| |
| -docdir | --docdir | --docdi | --doc | --do) |
| ac_prev=docdir ;; |
| -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) |
| docdir=$ac_optarg ;; |
| |
| -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) |
| ac_prev=dvidir ;; |
| -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) |
| dvidir=$ac_optarg ;; |
| |
| -enable-* | --enable-*) |
| ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` |
| # Reject names that are not valid shell variable names. |
| expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| { echo "$as_me: error: invalid feature name: $ac_feature" >&2 |
| { (exit 1); exit 1; }; } |
| ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` |
| eval enable_$ac_feature=\$ac_optarg ;; |
| |
| -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ |
| | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ |
| | --exec | --exe | --ex) |
| ac_prev=exec_prefix ;; |
| -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ |
| | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ |
| | --exec=* | --exe=* | --ex=*) |
| exec_prefix=$ac_optarg ;; |
| |
| -gas | --gas | --ga | --g) |
| # Obsolete; use --with-gas. |
| with_gas=yes ;; |
| |
| -help | --help | --hel | --he | -h) |
| ac_init_help=long ;; |
| -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) |
| ac_init_help=recursive ;; |
| -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) |
| ac_init_help=short ;; |
| |
| -host | --host | --hos | --ho) |
| ac_prev=host_alias ;; |
| -host=* | --host=* | --hos=* | --ho=*) |
| host_alias=$ac_optarg ;; |
| |
| -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) |
| ac_prev=htmldir ;; |
| -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ |
| | --ht=*) |
| htmldir=$ac_optarg ;; |
| |
| -includedir | --includedir | --includedi | --included | --include \ |
| | --includ | --inclu | --incl | --inc) |
| ac_prev=includedir ;; |
| -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ |
| | --includ=* | --inclu=* | --incl=* | --inc=*) |
| includedir=$ac_optarg ;; |
| |
| -infodir | --infodir | --infodi | --infod | --info | --inf) |
| ac_prev=infodir ;; |
| -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) |
| infodir=$ac_optarg ;; |
| |
| -libdir | --libdir | --libdi | --libd) |
| ac_prev=libdir ;; |
| -libdir=* | --libdir=* | --libdi=* | --libd=*) |
| libdir=$ac_optarg ;; |
| |
| -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ |
| | --libexe | --libex | --libe) |
| ac_prev=libexecdir ;; |
| -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ |
| | --libexe=* | --libex=* | --libe=*) |
| libexecdir=$ac_optarg ;; |
| |
| -localedir | --localedir | --localedi | --localed | --locale) |
| ac_prev=localedir ;; |
| -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) |
| localedir=$ac_optarg ;; |
| |
| -localstatedir | --localstatedir | --localstatedi | --localstated \ |
| | --localstate | --localstat | --localsta | --localst | --locals) |
| ac_prev=localstatedir ;; |
| -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ |
| | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) |
| localstatedir=$ac_optarg ;; |
| |
| -mandir | --mandir | --mandi | --mand | --man | --ma | --m) |
| ac_prev=mandir ;; |
| -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) |
| mandir=$ac_optarg ;; |
| |
| -nfp | --nfp | --nf) |
| # Obsolete; use --without-fp. |
| with_fp=no ;; |
| |
| -no-create | --no-create | --no-creat | --no-crea | --no-cre \ |
| | --no-cr | --no-c | -n) |
| no_create=yes ;; |
| |
| -no-recursion | --no-recursion | --no-recursio | --no-recursi \ |
| | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) |
| no_recursion=yes ;; |
| |
| -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ |
| | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ |
| | --oldin | --oldi | --old | --ol | --o) |
| ac_prev=oldincludedir ;; |
| -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ |
| | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ |
| | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) |
| oldincludedir=$ac_optarg ;; |
| |
| -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) |
| ac_prev=prefix ;; |
| -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) |
| prefix=$ac_optarg ;; |
| |
| -program-prefix | --program-prefix | --program-prefi | --program-pref \ |
| | --program-pre | --program-pr | --program-p) |
| ac_prev=program_prefix ;; |
| -program-prefix=* | --program-prefix=* | --program-prefi=* \ |
| | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) |
| program_prefix=$ac_optarg ;; |
| |
| -program-suffix | --program-suffix | --program-suffi | --program-suff \ |
| | --program-suf | --program-su | --program-s) |
| ac_prev=program_suffix ;; |
| -program-suffix=* | --program-suffix=* | --program-suffi=* \ |
| | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) |
| program_suffix=$ac_optarg ;; |
| |
| -program-transform-name | --program-transform-name \ |
| | --program-transform-nam | --program-transform-na \ |
| | --program-transform-n | --program-transform- \ |
| | --program-transform | --program-transfor \ |
| | --program-transfo | --program-transf \ |
| | --program-trans | --program-tran \ |
| | --progr-tra | --program-tr | --program-t) |
| ac_prev=program_transform_name ;; |
| -program-transform-name=* | --program-transform-name=* \ |
| | --program-transform-nam=* | --program-transform-na=* \ |
| | --program-transform-n=* | --program-transform-=* \ |
| | --program-transform=* | --program-transfor=* \ |
| | --program-transfo=* | --program-transf=* \ |
| | --program-trans=* | --program-tran=* \ |
| | --progr-tra=* | --program-tr=* | --program-t=*) |
| program_transform_name=$ac_optarg ;; |
| |
| -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) |
| ac_prev=pdfdir ;; |
| -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) |
| pdfdir=$ac_optarg ;; |
| |
| -psdir | --psdir | --psdi | --psd | --ps) |
| ac_prev=psdir ;; |
| -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) |
| psdir=$ac_optarg ;; |
| |
| -q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| | -silent | --silent | --silen | --sile | --sil) |
| silent=yes ;; |
| |
| -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) |
| ac_prev=sbindir ;; |
| -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ |
| | --sbi=* | --sb=*) |
| sbindir=$ac_optarg ;; |
| |
| -sharedstatedir | --sharedstatedir | --sharedstatedi \ |
| | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ |
| | --sharedst | --shareds | --shared | --share | --shar \ |
| | --sha | --sh) |
| ac_prev=sharedstatedir ;; |
| -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ |
| | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ |
| | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ |
| | --sha=* | --sh=*) |
| sharedstatedir=$ac_optarg ;; |
| |
| -site | --site | --sit) |
| ac_prev=site ;; |
| -site=* | --site=* | --sit=*) |
| site=$ac_optarg ;; |
| |
| -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) |
| ac_prev=srcdir ;; |
| -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) |
| srcdir=$ac_optarg ;; |
| |
| -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ |
| | --syscon | --sysco | --sysc | --sys | --sy) |
| ac_prev=sysconfdir ;; |
| -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ |
| | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) |
| sysconfdir=$ac_optarg ;; |
| |
| -target | --target | --targe | --targ | --tar | --ta | --t) |
| ac_prev=target_alias ;; |
| -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) |
| target_alias=$ac_optarg ;; |
| |
| -v | -verbose | --verbose | --verbos | --verbo | --verb) |
| verbose=yes ;; |
| |
| -version | --version | --versio | --versi | --vers | -V) |
| ac_init_version=: ;; |
| |
| -with-* | --with-*) |
| ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` |
| # Reject names that are not valid shell variable names. |
| expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| { echo "$as_me: error: invalid package name: $ac_package" >&2 |
| { (exit 1); exit 1; }; } |
| ac_package=`echo $ac_package | sed 's/[-.]/_/g'` |
| eval with_$ac_package=\$ac_optarg ;; |
| |
| -without-* | --without-*) |
| ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` |
| # Reject names that are not valid shell variable names. |
| expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| { echo "$as_me: error: invalid package name: $ac_package" >&2 |
| { (exit 1); exit 1; }; } |
| ac_package=`echo $ac_package | sed 's/[-.]/_/g'` |
| eval with_$ac_package=no ;; |
| |
| --x) |
| # Obsolete; use --with-x. |
| with_x=yes ;; |
| |
| -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ |
| | --x-incl | --x-inc | --x-in | --x-i) |
| ac_prev=x_includes ;; |
| -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ |
| | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) |
| x_includes=$ac_optarg ;; |
| |
| -x-libraries | --x-libraries | --x-librarie | --x-librari \ |
| | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) |
| ac_prev=x_libraries ;; |
| -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ |
| | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) |
| x_libraries=$ac_optarg ;; |
| |
| -*) { echo "$as_me: error: unrecognized option: $ac_option |
| Try \`$0 --help' for more information." >&2 |
| { (exit 1); exit 1; }; } |
| ;; |
| |
| *=*) |
| ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` |
| # Reject names that are not valid shell variable names. |
| expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && |
| { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 |
| { (exit 1); exit 1; }; } |
| eval $ac_envvar=\$ac_optarg |
| export $ac_envvar ;; |
| |
| *) |
| # FIXME: should be removed in autoconf 3.0. |
| echo "$as_me: WARNING: you should use --build, --host, --target" >&2 |
| expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && |
| echo "$as_me: WARNING: invalid host type: $ac_option" >&2 |
| : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} |
| ;; |
| |
| esac |
| done |
| |
| if test -n "$ac_prev"; then |
| ac_option=--`echo $ac_prev | sed 's/_/-/g'` |
| { echo "$as_me: error: missing argument to $ac_option" >&2 |
| { (exit 1); exit 1; }; } |
| fi |
| |
| # Be sure to have absolute directory names. |
| for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ |
| datadir sysconfdir sharedstatedir localstatedir includedir \ |
| oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ |
| libdir localedir mandir |
| do |
| eval ac_val=\$$ac_var |
| case $ac_val in |
| [\\/$]* | ?:[\\/]* ) continue;; |
| NONE | '' ) case $ac_var in *prefix ) continue;; esac;; |
| esac |
| { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 |
| { (exit 1); exit 1; }; } |
| done |
| |
| # There might be people who depend on the old broken behavior: `$host' |
| # used to hold the argument of --host etc. |
| # FIXME: To remove some day. |
| build=$build_alias |
| host=$host_alias |
| target=$target_alias |
| |
| # FIXME: To remove some day. |
| if test "x$host_alias" != x; then |
| if test "x$build_alias" = x; then |
| cross_compiling=maybe |
| echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. |
| If a cross compiler is detected then cross compile mode will be used." >&2 |
| elif test "x$build_alias" != "x$host_alias"; then |
| cross_compiling=yes |
| fi |
| fi |
| |
| ac_tool_prefix= |
| test -n "$host_alias" && ac_tool_prefix=$host_alias- |
| |
| test "$silent" = yes && exec 6>/dev/null |
| |
| |
| ac_pwd=`pwd` && test -n "$ac_pwd" && |
| ac_ls_di=`ls -di .` && |
| ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || |
| { echo "$as_me: error: Working directory cannot be determined" >&2 |
| { (exit 1); exit 1; }; } |
| test "X$ac_ls_di" = "X$ac_pwd_ls_di" || |
| { echo "$as_me: error: pwd does not report name of working directory" >&2 |
| { (exit 1); exit 1; }; } |
| |
| |
| # Find the source files, if location was not specified. |
| if test -z "$srcdir"; then |
| ac_srcdir_defaulted=yes |
| # Try the directory containing this script, then the parent directory. |
| ac_confdir=`$as_dirname -- "$0" || |
| $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| X"$0" : 'X\(//\)[^/]' \| \ |
| X"$0" : 'X\(//\)$' \| \ |
| X"$0" : 'X\(/\)' \| . 2>/dev/null || |
| echo X"$0" | |
| sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| s//\1/ |
| q |
| } |
| /^X\(\/\/\)[^/].*/{ |
| s//\1/ |
| q |
| } |
| /^X\(\/\/\)$/{ |
| s//\1/ |
| q |
| } |
| /^X\(\/\).*/{ |
| s//\1/ |
| q |
| } |
| s/.*/./; q'` |
| srcdir=$ac_confdir |
| if test ! -r "$srcdir/$ac_unique_file"; then |
| srcdir=.. |
| fi |
| else |
| ac_srcdir_defaulted=no |
| fi |
| if test ! -r "$srcdir/$ac_unique_file"; then |
| test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." |
| { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 |
| { (exit 1); exit 1; }; } |
| fi |
| ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" |
| ac_abs_confdir=`( |
| cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 |
| { (exit 1); exit 1; }; } |
| pwd)` |
| # When building in place, set srcdir=. |
| if test "$ac_abs_confdir" = "$ac_pwd"; then |
| srcdir=. |
| fi |
| # Remove unnecessary trailing slashes from srcdir. |
| # Double slashes in file names in object file debugging info |
| # mess up M-x gdb in Emacs. |
| case $srcdir in |
| */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; |
| esac |
| for ac_var in $ac_precious_vars; do |
| eval ac_env_${ac_var}_set=\${${ac_var}+set} |
| eval ac_env_${ac_var}_value=\$${ac_var} |
| eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} |
| eval ac_cv_env_${ac_var}_value=\$${ac_var} |
| done |
| |
| # |
| # Report the --help message. |
| # |
| if test "$ac_init_help" = "long"; then |
| # Omit some internal or obsolete options to make the list less imposing. |
| # This message is too long to be a string in the A/UX 3.1 sh. |
| cat <<_ACEOF |
| \`configure' configures llvm-tv pre-release to adapt to many kinds of systems. |
| |
| Usage: $0 [OPTION]... [VAR=VALUE]... |
| |
| To assign environment variables (e.g., CC, CFLAGS...), specify them as |
| VAR=VALUE. See below for descriptions of some of the useful variables. |
| |
| Defaults for the options are specified in brackets. |
| |
| Configuration: |
| -h, --help display this help and exit |
| --help=short display options specific to this package |
| --help=recursive display the short help of all the included packages |
| -V, --version display version information and exit |
| -q, --quiet, --silent do not print \`checking...' messages |
| --cache-file=FILE cache test results in FILE [disabled] |
| -C, --config-cache alias for \`--cache-file=config.cache' |
| -n, --no-create do not create output files |
| --srcdir=DIR find the sources in DIR [configure dir or \`..'] |
| |
| Installation directories: |
| --prefix=PREFIX install architecture-independent files in PREFIX |
| [$ac_default_prefix] |
| --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX |
| [PREFIX] |
| |
| By default, \`make install' will install all the files in |
| \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify |
| an installation prefix other than \`$ac_default_prefix' using \`--prefix', |
| for instance \`--prefix=\$HOME'. |
| |
| For better control, use the options below. |
| |
| Fine tuning of the installation directories: |
| --bindir=DIR user executables [EPREFIX/bin] |
| --sbindir=DIR system admin executables [EPREFIX/sbin] |
| --libexecdir=DIR program executables [EPREFIX/libexec] |
| --sysconfdir=DIR read-only single-machine data [PREFIX/etc] |
| --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] |
| --localstatedir=DIR modifiable single-machine data [PREFIX/var] |
| --libdir=DIR object code libraries [EPREFIX/lib] |
| --includedir=DIR C header files [PREFIX/include] |
| --oldincludedir=DIR C header files for non-gcc [/usr/include] |
| --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] |
| --datadir=DIR read-only architecture-independent data [DATAROOTDIR] |
| --infodir=DIR info documentation [DATAROOTDIR/info] |
| --localedir=DIR locale-dependent data [DATAROOTDIR/locale] |
| --mandir=DIR man documentation [DATAROOTDIR/man] |
| --docdir=DIR documentation root [DATAROOTDIR/doc/-llvm-tv-] |
| --htmldir=DIR html documentation [DOCDIR] |
| --dvidir=DIR dvi documentation [DOCDIR] |
| --pdfdir=DIR pdf documentation [DOCDIR] |
| --psdir=DIR ps documentation [DOCDIR] |
| _ACEOF |
| |
| cat <<\_ACEOF |
| _ACEOF |
| fi |
| |
| if test -n "$ac_init_help"; then |
| case $ac_init_help in |
| short | recursive ) echo "Configuration of llvm-tv pre-release:";; |
| esac |
| cat <<\_ACEOF |
| |
| Optional Packages: |
| --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] |
| --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) |
| --with-llvm-src Location of LLVM Source Code |
| --with-llvm-obj Location of LLVM Object Code |
| --with-poolalloc-src Location of PoolAlloc Source Code |
| --with-poolalloc-obj Location of PoolAlloc Object Code |
| |
| Report bugs to <llvmbugs@cs.uiuc.edu>. |
| _ACEOF |
| ac_status=$? |
| fi |
| |
| if test "$ac_init_help" = "recursive"; then |
| # If there are subdirs, report their specific --help. |
| for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue |
| test -d "$ac_dir" || continue |
| ac_builddir=. |
| |
| case "$ac_dir" in |
| .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| *) |
| ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` |
| # A ".." for each directory in $ac_dir_suffix. |
| ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` |
| case $ac_top_builddir_sub in |
| "") ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; |
| esac ;; |
| esac |
| ac_abs_top_builddir=$ac_pwd |
| ac_abs_builddir=$ac_pwd$ac_dir_suffix |
| # for backward compatibility: |
| ac_top_builddir=$ac_top_build_prefix |
| |
| case $srcdir in |
| .) # We are building in place. |
| ac_srcdir=. |
| ac_top_srcdir=$ac_top_builddir_sub |
| ac_abs_top_srcdir=$ac_pwd ;; |
| [\\/]* | ?:[\\/]* ) # Absolute name. |
| ac_srcdir=$srcdir$ac_dir_suffix; |
| ac_top_srcdir=$srcdir |
| ac_abs_top_srcdir=$srcdir ;; |
| *) # Relative name. |
| ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix |
| ac_top_srcdir=$ac_top_build_prefix$srcdir |
| ac_abs_top_srcdir=$ac_pwd/$srcdir ;; |
| esac |
| ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix |
| |
| cd "$ac_dir" || { ac_status=$?; continue; } |
| # Check for guested configure. |
| if test -f "$ac_srcdir/configure.gnu"; then |
| echo && |
| $SHELL "$ac_srcdir/configure.gnu" --help=recursive |
| elif test -f "$ac_srcdir/configure"; then |
| echo && |
| $SHELL "$ac_srcdir/configure" --help=recursive |
| else |
| echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 |
| fi || ac_status=$? |
| cd "$ac_pwd" || { ac_status=$?; break; } |
| done |
| fi |
| |
| test -n "$ac_init_help" && exit $ac_status |
| if $ac_init_version; then |
| cat <<\_ACEOF |
| llvm-tv configure pre-release |
| generated by GNU Autoconf 2.61 |
| |
| Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, |
| 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. |
| This configure script is free software; the Free Software Foundation |
| gives unlimited permission to copy, distribute and modify it. |
| _ACEOF |
| exit |
| fi |
| cat >config.log <<_ACEOF |
| This file contains any messages produced by compilers while |
| running configure, to aid debugging if configure makes a mistake. |
| |
| It was created by llvm-tv $as_me pre-release, which was |
| generated by GNU Autoconf 2.61. Invocation command line was |
| |
| $ $0 $@ |
| |
| _ACEOF |
| exec 5>>config.log |
| { |
| cat <<_ASUNAME |
| ## --------- ## |
| ## Platform. ## |
| ## --------- ## |
| |
| hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` |
| uname -m = `(uname -m) 2>/dev/null || echo unknown` |
| uname -r = `(uname -r) 2>/dev/null || echo unknown` |
| uname -s = `(uname -s) 2>/dev/null || echo unknown` |
| uname -v = `(uname -v) 2>/dev/null || echo unknown` |
| |
| /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` |
| /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` |
| |
| /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` |
| /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` |
| /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` |
| /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` |
| /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` |
| /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` |
| /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` |
| |
| _ASUNAME |
| |
| as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| for as_dir in $PATH |
| do |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| echo "PATH: $as_dir" |
| done |
| IFS=$as_save_IFS |
| |
| } >&5 |
| |
| cat >&5 <<_ACEOF |
| |
| |
| ## ----------- ## |
| ## Core tests. ## |
| ## ----------- ## |
| |
| _ACEOF |
| |
| |
| # Keep a trace of the command line. |
| # Strip out --no-create and --no-recursion so they do not pile up. |
| # Strip out --silent because we don't want to record it for future runs. |
| # Also quote any args containing shell meta-characters. |
| # Make two passes to allow for proper duplicate-argument suppression. |
| ac_configure_args= |
| ac_configure_args0= |
| ac_configure_args1= |
| ac_must_keep_next=false |
| for ac_pass in 1 2 |
| do |
| for ac_arg |
| do |
| case $ac_arg in |
| -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; |
| -q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| | -silent | --silent | --silen | --sile | --sil) |
| continue ;; |
| *\'*) |
| ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; |
| esac |
| case $ac_pass in |
| 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; |
| 2) |
| ac_configure_args1="$ac_configure_args1 '$ac_arg'" |
| if test $ac_must_keep_next = true; then |
| ac_must_keep_next=false # Got value, back to normal. |
| else |
| case $ac_arg in |
| *=* | --config-cache | -C | -disable-* | --disable-* \ |
| | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ |
| | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ |
| | -with-* | --with-* | -without-* | --without-* | --x) |
| case "$ac_configure_args0 " in |
| "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; |
| esac |
| ;; |
| -* ) ac_must_keep_next=true ;; |
| esac |
| fi |
| ac_configure_args="$ac_configure_args '$ac_arg'" |
| ;; |
| esac |
| done |
| done |
| $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } |
| $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } |
| |
| # When interrupted or exit'd, cleanup temporary files, and complete |
| # config.log. We remove comments because anyway the quotes in there |
| # would cause problems or look ugly. |
| # WARNING: Use '\'' to represent an apostrophe within the trap. |
| # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. |
| trap 'exit_status=$? |
| # Save into config.log some information that might help in debugging. |
| { |
| echo |
| |
| cat <<\_ASBOX |
| ## ---------------- ## |
| ## Cache variables. ## |
| ## ---------------- ## |
| _ASBOX |
| echo |
| # The following way of writing the cache mishandles newlines in values, |
| ( |
| for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do |
| eval ac_val=\$$ac_var |
| case $ac_val in #( |
| *${as_nl}*) |
| case $ac_var in #( |
| *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 |
| echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; |
| esac |
| case $ac_var in #( |
| _ | IFS | as_nl) ;; #( |
| *) $as_unset $ac_var ;; |
| esac ;; |
| esac |
| done |
| (set) 2>&1 | |
| case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( |
| *${as_nl}ac_space=\ *) |
| sed -n \ |
| "s/'\''/'\''\\\\'\'''\''/g; |
| s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" |
| ;; #( |
| *) |
| sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" |
| ;; |
| esac | |
| sort |
| ) |
| echo |
| |
| cat <<\_ASBOX |
| ## ----------------- ## |
| ## Output variables. ## |
| ## ----------------- ## |
| _ASBOX |
| echo |
| for ac_var in $ac_subst_vars |
| do |
| eval ac_val=\$$ac_var |
| case $ac_val in |
| *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; |
| esac |
| echo "$ac_var='\''$ac_val'\''" |
| done | sort |
| echo |
| |
| if test -n "$ac_subst_files"; then |
| cat <<\_ASBOX |
| ## ------------------- ## |
| ## File substitutions. ## |
| ## ------------------- ## |
| _ASBOX |
| echo |
| for ac_var in $ac_subst_files |
| do |
| eval ac_val=\$$ac_var |
| case $ac_val in |
| *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; |
| esac |
| echo "$ac_var='\''$ac_val'\''" |
| done | sort |
| echo |
| fi |
| |
| if test -s confdefs.h; then |
| cat <<\_ASBOX |
| ## ----------- ## |
| ## confdefs.h. ## |
| ## ----------- ## |
| _ASBOX |
| echo |
| cat confdefs.h |
| echo |
| fi |
| test "$ac_signal" != 0 && |
| echo "$as_me: caught signal $ac_signal" |
| echo "$as_me: exit $exit_status" |
| } >&5 |
| rm -f core *.core core.conftest.* && |
| rm -f -r conftest* confdefs* conf$$* $ac_clean_files && |
| exit $exit_status |
| ' 0 |
| for ac_signal in 1 2 13 15; do |
| trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal |
| done |
| ac_signal=0 |
| |
| # confdefs.h avoids OS command line length limits that DEFS can exceed. |
| rm -f -r conftest* confdefs.h |
| |
| # Predefined preprocessor variables. |
| |
| cat >>confdefs.h <<_ACEOF |
| #define PACKAGE_NAME "$PACKAGE_NAME" |
| _ACEOF |
| |
| |
| cat >>confdefs.h <<_ACEOF |
| #define PACKAGE_TARNAME "$PACKAGE_TARNAME" |
| _ACEOF |
| |
| |
| cat >>confdefs.h <<_ACEOF |
| #define PACKAGE_VERSION "$PACKAGE_VERSION" |
| _ACEOF |
| |
| |
| cat >>confdefs.h <<_ACEOF |
| #define PACKAGE_STRING "$PACKAGE_STRING" |
| _ACEOF |
| |
| |
| cat >>confdefs.h <<_ACEOF |
| #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" |
| _ACEOF |
| |
| |
| # Let the site file select an alternate cache file if it wants to. |
| # Prefer explicitly selected file to automatically selected ones. |
| if test -n "$CONFIG_SITE"; then |
| set x "$CONFIG_SITE" |
| elif test "x$prefix" != xNONE; then |
| set x "$prefix/share/config.site" "$prefix/etc/config.site" |
| else |
| set x "$ac_default_prefix/share/config.site" \ |
| "$ac_default_prefix/etc/config.site" |
| fi |
| shift |
| for ac_site_file |
| do |
| if test -r "$ac_site_file"; then |
| { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 |
| echo "$as_me: loading site script $ac_site_file" >&6;} |
| sed 's/^/| /' "$ac_site_file" >&5 |
| . "$ac_site_file" |
| fi |
| done |
| |
| if test -r "$cache_file"; then |
| # Some versions of bash will fail to source /dev/null (special |
| # files actually), so we avoid doing that. |
| if test -f "$cache_file"; then |
| { echo "$as_me:$LINENO: loading cache $cache_file" >&5 |
| echo "$as_me: loading cache $cache_file" >&6;} |
| case $cache_file in |
| [\\/]* | ?:[\\/]* ) . "$cache_file";; |
| *) . "./$cache_file";; |
| esac |
| fi |
| else |
| { echo "$as_me:$LINENO: creating cache $cache_file" >&5 |
| echo "$as_me: creating cache $cache_file" >&6;} |
| >$cache_file |
| fi |
| |
| # Check that the precious variables saved in the cache have kept the same |
| # value. |
| ac_cache_corrupted=false |
| for ac_var in $ac_precious_vars; do |
| eval ac_old_set=\$ac_cv_env_${ac_var}_set |
| eval ac_new_set=\$ac_env_${ac_var}_set |
| eval ac_old_val=\$ac_cv_env_${ac_var}_value |
| eval ac_new_val=\$ac_env_${ac_var}_value |
| case $ac_old_set,$ac_new_set in |
| set,) |
| { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 |
| echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} |
| ac_cache_corrupted=: ;; |
| ,set) |
| { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 |
| echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} |
| ac_cache_corrupted=: ;; |
| ,);; |
| *) |
| if test "x$ac_old_val" != "x$ac_new_val"; then |
| { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 |
| echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} |
| { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 |
| echo "$as_me: former value: $ac_old_val" >&2;} |
| { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 |
| echo "$as_me: current value: $ac_new_val" >&2;} |
| ac_cache_corrupted=: |
| fi;; |
| esac |
| # Pass precious variables to config.status. |
| if test "$ac_new_set" = set; then |
| case $ac_new_val in |
| *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; |
| *) ac_arg=$ac_var=$ac_new_val ;; |
| esac |
| case " $ac_configure_args " in |
| *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. |
| *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; |
| esac |
| fi |
| done |
| if $ac_cache_corrupted; then |
| { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 |
| echo "$as_me: error: changes in the environment can compromise the build" >&2;} |
| { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 |
| echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} |
| { (exit 1); exit 1; }; } |
| fi |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| ac_ext=c |
| ac_cpp='$CPP $CPPFLAGS' |
| ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' |
| ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' |
| ac_compiler_gnu=$ac_cv_c_compiler_gnu |
| |
| |
| |
| ac_aux_dir= |
| for ac_dir in autoconf "$srcdir"/autoconf; do |
| if test -f "$ac_dir/install-sh"; then |
| ac_aux_dir=$ac_dir |
| ac_install_sh="$ac_aux_dir/install-sh -c" |
| break |
| elif test -f "$ac_dir/install.sh"; then |
| ac_aux_dir=$ac_dir |
| ac_install_sh="$ac_aux_dir/install.sh -c" |
| break |
| elif test -f "$ac_dir/shtool"; then |
| ac_aux_dir=$ac_dir |
| ac_install_sh="$ac_aux_dir/shtool install -c" |
| break |
| fi |
| done |
| if test -z "$ac_aux_dir"; then |
| { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in autoconf \"$srcdir\"/autoconf" >&5 |
| echo "$as_me: error: cannot find install-sh or install.sh in autoconf \"$srcdir\"/autoconf" >&2;} |
| { (exit 1); exit 1; }; } |
| fi |
| |
| # These three variables are undocumented and unsupported, |
| # and are intended to be withdrawn in a future Autoconf release. |
| # They can cause serious problems if a builder's source tree is in a directory |
| # whose full name contains unusual characters. |
| ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. |
| ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. |
| ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. |
| |
| |
| |
| ac_config_files="$ac_config_files Makefile.config" |
| |
| |
| ac_config_commands="$ac_config_commands Makefile" |
| |
| |
| ac_config_commands="$ac_config_commands Makefile.common" |
| |
| |
| ac_config_commands="$ac_config_commands lib/Makefile" |
| |
| |
| ac_config_commands="$ac_config_commands lib/Snapshot/Makefile" |
| |
| |
| ac_config_commands="$ac_config_commands tools/Makefile" |
| |
| |
| ac_config_commands="$ac_config_commands tools/llvm-tv/Makefile" |
| |
| |
| |
| |
| # Check whether --with-llvm-src was given. |
| if test "${with_llvm_src+set}" = set; then |
| withval=$with_llvm_src; LLVM_SRC=$withval |
| |
| else |
| LLVM_SRC=`cd ${srcdir}/../..; pwd` |
| |
| fi |
| |
| |
| # Check whether --with-llvm-obj was given. |
| if test "${with_llvm_obj+set}" = set; then |
| withval=$with_llvm_obj; LLVM_OBJ=$withval |
| |
| else |
| LLVM_OBJ=`cd ../..; pwd` |
| |
| fi |
| |
| |
| |
| # Check whether --with-poolalloc-src was given. |
| if test "${with_poolalloc_src+set}" = set; then |
| withval=$with_poolalloc_src; POOLALLOC_SRC=$withval |
| |
| else |
| POOLALLOC_SRC=`cd ${srcdir}/../..; pwd` |
| |
| fi |
| |
| |
| # Check whether --with-poolalloc-obj was given. |
| if test "${with_poolalloc_obj+set}" = set; then |
| withval=$with_poolalloc_obj; POOLALLOC_OBJ=$withval |
| |
| else |
| POOLALLOC_OBJ=`cd ../..; pwd` |
| |
| fi |
| |
| |
| cat >confcache <<\_ACEOF |
| # This file is a shell script that caches the results of configure |
| # tests run on this system so they can be shared between configure |
| # scripts and configure runs, see configure's option --config-cache. |
| # It is not useful on other systems. If it contains results you don't |
| # want to keep, you may remove or edit it. |
| # |
| # config.status only pays attention to the cache file if you give it |
| # the --recheck option to rerun configure. |
| # |
| # `ac_cv_env_foo' variables (set or unset) will be overridden when |
| # loading this file, other *unset* `ac_cv_foo' will be assigned the |
| # following values. |
| |
| _ACEOF |
| |
| # The following way of writing the cache mishandles newlines in values, |
| # but we know of no workaround that is simple, portable, and efficient. |
| # So, we kill variables containing newlines. |
| # Ultrix sh set writes to stderr and can't be redirected directly, |
| # and sets the high bit in the cache file unless we assign to the vars. |
| ( |
| for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do |
| eval ac_val=\$$ac_var |
| case $ac_val in #( |
| *${as_nl}*) |
| case $ac_var in #( |
| *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 |
| echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; |
| esac |
| case $ac_var in #( |
| _ | IFS | as_nl) ;; #( |
| *) $as_unset $ac_var ;; |
| esac ;; |
| esac |
| done |
| |
| (set) 2>&1 | |
| case $as_nl`(ac_space=' '; set) 2>&1` in #( |
| *${as_nl}ac_space=\ *) |
| # `set' does not quote correctly, so add quotes (double-quote |
| # substitution turns \\\\ into \\, and sed turns \\ into \). |
| sed -n \ |
| "s/'/'\\\\''/g; |
| s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" |
| ;; #( |
| *) |
| # `set' quotes correctly as required by POSIX, so do not add quotes. |
| sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" |
| ;; |
| esac | |
| sort |
| ) | |
| sed ' |
| /^ac_cv_env_/b end |
| t clear |
| :clear |
| s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ |
| t end |
| s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ |
| :end' >>confcache |
| if diff "$cache_file" confcache >/dev/null 2>&1; then :; else |
| if test -w "$cache_file"; then |
| test "x$cache_file" != "x/dev/null" && |
| { echo "$as_me:$LINENO: updating cache $cache_file" >&5 |
| echo "$as_me: updating cache $cache_file" >&6;} |
| cat confcache >$cache_file |
| else |
| { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 |
| echo "$as_me: not updating unwritable cache $cache_file" >&6;} |
| fi |
| fi |
| rm -f confcache |
| |
| test "x$prefix" = xNONE && prefix=$ac_default_prefix |
| # Let make expand exec_prefix. |
| test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' |
| |
| # Transform confdefs.h into DEFS. |
| # Protect against shell expansion while executing Makefile rules. |
| # Protect against Makefile macro expansion. |
| # |
| # If the first sed substitution is executed (which looks for macros that |
| # take arguments), then branch to the quote section. Otherwise, |
| # look for a macro that doesn't take arguments. |
| ac_script=' |
| t clear |
| :clear |
| s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g |
| t quote |
| s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g |
| t quote |
| b any |
| :quote |
| s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g |
| s/\[/\\&/g |
| s/\]/\\&/g |
| s/\$/$$/g |
| H |
| :any |
| ${ |
| g |
| s/^\n// |
| s/\n/ /g |
| p |
| } |
| ' |
| DEFS=`sed -n "$ac_script" confdefs.h` |
| |
| |
| ac_libobjs= |
| ac_ltlibobjs= |
| for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue |
| # 1. Remove the extension, and $U if already installed. |
| ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' |
| ac_i=`echo "$ac_i" | sed "$ac_script"` |
| # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR |
| # will be set to the directory where LIBOBJS objects are built. |
| ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" |
| ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' |
| done |
| LIBOBJS=$ac_libobjs |
| |
| LTLIBOBJS=$ac_ltlibobjs |
| |
| |
| |
| : ${CONFIG_STATUS=./config.status} |
| ac_clean_files_save=$ac_clean_files |
| ac_clean_files="$ac_clean_files $CONFIG_STATUS" |
| { echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 |
| echo "$as_me: creating $CONFIG_STATUS" >&6;} |
| cat >$CONFIG_STATUS <<_ACEOF |
| #! $SHELL |
| # Generated by $as_me. |
| # Run this file to recreate the current configuration. |
| # Compiler output produced by configure, useful for debugging |
| # configure, is in config.log if it exists. |
| |
| debug=false |
| ac_cs_recheck=false |
| ac_cs_silent=false |
| SHELL=\${CONFIG_SHELL-$SHELL} |
| _ACEOF |
| |
| cat >>$CONFIG_STATUS <<\_ACEOF |
| ## --------------------- ## |
| ## M4sh Initialization. ## |
| ## --------------------- ## |
| |
| # Be more Bourne compatible |
| DUALCASE=1; export DUALCASE # for MKS sh |
| if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| emulate sh |
| NULLCMD=: |
| # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| # is contrary to our usage. Disable this feature. |
| alias -g '${1+"$@"}'='"$@"' |
| setopt NO_GLOB_SUBST |
| else |
| case `(set -o) 2>/dev/null` in |
| *posix*) set -o posix ;; |
| esac |
| |
| fi |
| |
| |
| |
| |
| # PATH needs CR |
| # Avoid depending upon Character Ranges. |
| as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
| as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
| as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
| as_cr_digits='0123456789' |
| as_cr_alnum=$as_cr_Letters$as_cr_digits |
| |
| # The user is always right. |
| if test "${PATH_SEPARATOR+set}" != set; then |
| echo "#! /bin/sh" >conf$$.sh |
| echo "exit 0" >>conf$$.sh |
| chmod +x conf$$.sh |
| if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then |
| PATH_SEPARATOR=';' |
| else |
| PATH_SEPARATOR=: |
| fi |
| rm -f conf$$.sh |
| fi |
| |
| # Support unset when possible. |
| if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then |
| as_unset=unset |
| else |
| as_unset=false |
| fi |
| |
| |
| # IFS |
| # We need space, tab and new line, in precisely that order. Quoting is |
| # there to prevent editors from complaining about space-tab. |
| # (If _AS_PATH_WALK were called with IFS unset, it would disable word |
| # splitting by setting IFS to empty value.) |
| as_nl=' |
| ' |
| IFS=" "" $as_nl" |
| |
| # Find who we are. Look in the path if we contain no directory separator. |
| case $0 in |
| *[\\/]* ) as_myself=$0 ;; |
| *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
| for as_dir in $PATH |
| do |
| IFS=$as_save_IFS |
| test -z "$as_dir" && as_dir=. |
| test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
| done |
| IFS=$as_save_IFS |
| |
| ;; |
| esac |
| # We did not find ourselves, most probably we were run as `sh COMMAND' |
| # in which case we are not to be found in the path. |
| if test "x$as_myself" = x; then |
| as_myself=$0 |
| fi |
| if test ! -f "$as_myself"; then |
| echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 |
| { (exit 1); exit 1; } |
| fi |
| |
| # Work around bugs in pre-3.0 UWIN ksh. |
| for as_var in ENV MAIL MAILPATH |
| do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| done |
| PS1='$ ' |
| PS2='> ' |
| PS4='+ ' |
| |
| # NLS nuisances. |
| for as_var in \ |
| LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ |
| LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ |
| LC_TELEPHONE LC_TIME |
| do |
| if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then |
| eval $as_var=C; export $as_var |
| else |
| ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
| fi |
| done |
| |
| # Required to use basename. |
| if expr a : '\(a\)' >/dev/null 2>&1 && |
| test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| as_expr=expr |
| else |
| as_expr=false |
| fi |
| |
| if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then |
| as_basename=basename |
| else |
| as_basename=false |
| fi |
| |
| |
| # Name of the executable. |
| as_me=`$as_basename -- "$0" || |
| $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ |
| X"$0" : 'X\(//\)$' \| \ |
| X"$0" : 'X\(/\)' \| . 2>/dev/null || |
| echo X/"$0" | |
| sed '/^.*\/\([^/][^/]*\)\/*$/{ |
| s//\1/ |
| q |
| } |
| /^X\/\(\/\/\)$/{ |
| s//\1/ |
| q |
| } |
| /^X\/\(\/\).*/{ |
| s//\1/ |
| q |
| } |
| s/.*/./; q'` |
| |
| # CDPATH. |
| $as_unset CDPATH |
| |
| |
| |
| as_lineno_1=$LINENO |
| as_lineno_2=$LINENO |
| test "x$as_lineno_1" != "x$as_lineno_2" && |
| test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { |
| |
| # Create $as_me.lineno as a copy of $as_myself, but with $LINENO |
| # uniformly replaced by the line number. The first 'sed' inserts a |
| # line-number line after each line using $LINENO; the second 'sed' |
| # does the real work. The second script uses 'N' to pair each |
| # line-number line with the line containing $LINENO, and appends |
| # trailing '-' during substitution so that $LINENO is not a special |
| # case at line end. |
| # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the |
| # scripts with optimization help from Paolo Bonzini. Blame Lee |
| # E. McMahon (1931-1989) for sed's syntax. :-) |
| sed -n ' |
| p |
| /[$]LINENO/= |
| ' <$as_myself | |
| sed ' |
| s/[$]LINENO.*/&-/ |
| t lineno |
| b |
| :lineno |
| N |
| :loop |
| s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ |
| t loop |
| s/-\n.*// |
| ' >$as_me.lineno && |
| chmod +x "$as_me.lineno" || |
| { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 |
| { (exit 1); exit 1; }; } |
| |
| # Don't try to exec as it changes $[0], causing all sort of problems |
| # (the dirname of $[0] is not the place where we might find the |
| # original and so on. Autoconf is especially sensitive to this). |
| . "./$as_me.lineno" |
| # Exit status is that of the last command. |
| exit |
| } |
| |
| |
| if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then |
| as_dirname=dirname |
| else |
| as_dirname=false |
| fi |
| |
| ECHO_C= ECHO_N= ECHO_T= |
| case `echo -n x` in |
| -n*) |
| case `echo 'x\c'` in |
| *c*) ECHO_T=' ';; # ECHO_T is single tab character. |
| *) ECHO_C='\c';; |
| esac;; |
| *) |
| ECHO_N='-n';; |
| esac |
| |
| if expr a : '\(a\)' >/dev/null 2>&1 && |
| test "X`expr 00001 : '.*\(...\)'`" = X001; then |
| as_expr=expr |
| else |
| as_expr=false |
| fi |
| |
| rm -f conf$$ conf$$.exe conf$$.file |
| if test -d conf$$.dir; then |
| rm -f conf$$.dir/conf$$.file |
| else |
| rm -f conf$$.dir |
| mkdir conf$$.dir |
| fi |
| echo >conf$$.file |
| if ln -s conf$$.file conf$$ 2>/dev/null; then |
| as_ln_s='ln -s' |
| # ... but there are two gotchas: |
| # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. |
| # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. |
| # In both cases, we have to default to `cp -p'. |
| ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || |
| as_ln_s='cp -p' |
| elif ln conf$$.file conf$$ 2>/dev/null; then |
| as_ln_s=ln |
| else |
| as_ln_s='cp -p' |
| fi |
| rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file |
| rmdir conf$$.dir 2>/dev/null |
| |
| if mkdir -p . 2>/dev/null; then |
| as_mkdir_p=: |
| else |
| test -d ./-p && rmdir ./-p |
| as_mkdir_p=false |
| fi |
| |
| if test -x / >/dev/null 2>&1; then |
| as_test_x='test -x' |
| else |
| if ls -dL / >/dev/null 2>&1; then |
| as_ls_L_option=L |
| else |
| as_ls_L_option= |
| fi |
| as_test_x=' |
| eval sh -c '\'' |
| if test -d "$1"; then |
| test -d "$1/."; |
| else |
| case $1 in |
| -*)set "./$1";; |
| esac; |
| case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in |
| ???[sx]*):;;*)false;;esac;fi |
| '\'' sh |
| ' |
| fi |
| as_executable_p=$as_test_x |
| |
| # Sed expression to map a string onto a valid CPP name. |
| as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" |
| |
| # Sed expression to map a string onto a valid variable name. |
| as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" |
| |
| |
| exec 6>&1 |
| |
| # Save the log message, to keep $[0] and so on meaningful, and to |
| # report actual input values of CONFIG_FILES etc. instead of their |
| # values after options handling. |
| ac_log=" |
| This file was extended by llvm-tv $as_me pre-release, which was |
| generated by GNU Autoconf 2.61. Invocation command line was |
| |
| CONFIG_FILES = $CONFIG_FILES |
| CONFIG_HEADERS = $CONFIG_HEADERS |
| CONFIG_LINKS = $CONFIG_LINKS |
| CONFIG_COMMANDS = $CONFIG_COMMANDS |
| $ $0 $@ |
| |
| on `(hostname || uname -n) 2>/dev/null | sed 1q` |
| " |
| |
| _ACEOF |
| |
| cat >>$CONFIG_STATUS <<_ACEOF |
| # Files that config.status was made for. |
| config_files="$ac_config_files" |
| config_commands="$ac_config_commands" |
| |
| _ACEOF |
| |
| cat >>$CONFIG_STATUS <<\_ACEOF |
| ac_cs_usage="\ |
| \`$as_me' instantiates files from templates according to the |
| current configuration. |
| |
| Usage: $0 [OPTIONS] [FILE]... |
| |
| -h, --help print this help, then exit |
| -V, --version print version number and configuration settings, then exit |
| -q, --quiet do not print progress messages |
| -d, --debug don't remove temporary files |
| --recheck update $as_me by reconfiguring in the same conditions |
| --file=FILE[:TEMPLATE] |
| instantiate the configuration file FILE |
| |
| Configuration files: |
| $config_files |
| |
| Configuration commands: |
| $config_commands |
| |
| Report bugs to <bug-autoconf@gnu.org>." |
| |
| _ACEOF |
| cat >>$CONFIG_STATUS <<_ACEOF |
| ac_cs_version="\\ |
| llvm-tv config.status pre-release |
| configured by $0, generated by GNU Autoconf 2.61, |
| with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" |
| |
| Copyright (C) 2006 Free Software Foundation, Inc. |
| This config.status script is free software; the Free Software Foundation |
| gives unlimited permission to copy, distribute and modify it." |
| |
| ac_pwd='$ac_pwd' |
| srcdir='$srcdir' |
| _ACEOF |
| |
| cat >>$CONFIG_STATUS <<\_ACEOF |
| # If no file are specified by the user, then we need to provide default |
| # value. By we need to know if files were specified by the user. |
| ac_need_defaults=: |
| while test $# != 0 |
| do |
| case $1 in |
| --*=*) |
| ac_option=`expr "X$1" : 'X\([^=]*\)='` |
| ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` |
| ac_shift=: |
| ;; |
| *) |
| ac_option=$1 |
| ac_optarg=$2 |
| ac_shift=shift |
| ;; |
| esac |
| |
| case $ac_option in |
| # Handling of the options. |
| -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) |
| ac_cs_recheck=: ;; |
| --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) |
| echo "$ac_cs_version"; exit ;; |
| --debug | --debu | --deb | --de | --d | -d ) |
| debug=: ;; |
| --file | --fil | --fi | --f ) |
| $ac_shift |
| CONFIG_FILES="$CONFIG_FILES $ac_optarg" |
| ac_need_defaults=false;; |
| --he | --h | --help | --hel | -h ) |
| echo "$ac_cs_usage"; exit ;; |
| -q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| | -silent | --silent | --silen | --sile | --sil | --si | --s) |
| ac_cs_silent=: ;; |
| |
| # This is an error. |
| -*) { echo "$as_me: error: unrecognized option: $1 |
| Try \`$0 --help' for more information." >&2 |
| { (exit 1); exit 1; }; } ;; |
| |
| *) ac_config_targets="$ac_config_targets $1" |
| ac_need_defaults=false ;; |
| |
| esac |
| shift |
| done |
| |
| ac_configure_extra_args= |
| |
| if $ac_cs_silent; then |
| exec 6>/dev/null |
| ac_configure_extra_args="$ac_configure_extra_args --silent" |
| fi |
| |
| _ACEOF |
| cat >>$CONFIG_STATUS <<_ACEOF |
| if \$ac_cs_recheck; then |
| echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 |
| CONFIG_SHELL=$SHELL |
| export CONFIG_SHELL |
| exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion |
| fi |
| |
| _ACEOF |
| cat >>$CONFIG_STATUS <<\_ACEOF |
| exec 5>>config.log |
| { |
| echo |
| sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX |
| ## Running $as_me. ## |
| _ASBOX |
| echo "$ac_log" |
| } >&5 |
| |
| _ACEOF |
| cat >>$CONFIG_STATUS <<_ACEOF |
| # |
| # INIT-COMMANDS |
| # |
| ${srcdir}/autoconf/mkinstalldirs `dirname Makefile` |
| ${srcdir}/autoconf/mkinstalldirs `dirname Makefile.common` |
| ${srcdir}/autoconf/mkinstalldirs `dirname lib/Makefile` |
| ${srcdir}/autoconf/mkinstalldirs `dirname lib/Snapshot/Makefile` |
| ${srcdir}/autoconf/mkinstalldirs `dirname tools/Makefile` |
| ${srcdir}/autoconf/mkinstalldirs `dirname tools/llvm-tv/Makefile` |
| |
| _ACEOF |
| |
| cat >>$CONFIG_STATUS <<\_ACEOF |
| |
| # Handling of arguments. |
| for ac_config_target in $ac_config_targets |
| do |
| case $ac_config_target in |
| "Makefile.config") CONFIG_FILES="$CONFIG_FILES Makefile.config" ;; |
| "Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;; |
| "Makefile.common") CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile.common" ;; |
| "lib/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS lib/Makefile" ;; |
| "lib/Snapshot/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS lib/Snapshot/Makefile" ;; |
| "tools/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS tools/Makefile" ;; |
| "tools/llvm-tv/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS tools/llvm-tv/Makefile" ;; |
| |
| *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 |
| echo "$as_me: error: invalid argument: $ac_config_target" >&2;} |
| { (exit 1); exit 1; }; };; |
| esac |
| done |
| |
| |
| # If the user did not use the arguments to specify the items to instantiate, |
| # then the envvar interface is used. Set only those that are not. |
| # We use the long form for the default assignment because of an extremely |
| # bizarre bug on SunOS 4.1.3. |
| if $ac_need_defaults; then |
| test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files |
| test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands |
| fi |
| |
| # Have a temporary directory for convenience. Make it in the build tree |
| # simply because there is no reason against having it here, and in addition, |
| # creating and moving files from /tmp can sometimes cause problems. |
| # Hook for its removal unless debugging. |
| # Note that there is a small window in which the directory will not be cleaned: |
| # after its creation but before its name has been assigned to `$tmp'. |
| $debug || |
| { |
| tmp= |
| trap 'exit_status=$? |
| { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status |
| ' 0 |
| trap '{ (exit 1); exit 1; }' 1 2 13 15 |
| } |
| # Create a (secure) tmp directory for tmp files. |
| |
| { |
| tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && |
| test -n "$tmp" && test -d "$tmp" |
| } || |
| { |
| tmp=./conf$$-$RANDOM |
| (umask 077 && mkdir "$tmp") |
| } || |
| { |
| echo "$me: cannot create a temporary directory in ." >&2 |
| { (exit 1); exit 1; } |
| } |
| |
| # |
| # Set up the sed scripts for CONFIG_FILES section. |
| # |
| |
| # No need to generate the scripts if there are no CONFIG_FILES. |
| # This happens for instance when ./config.status config.h |
| if test -n "$CONFIG_FILES"; then |
| |
| _ACEOF |
| |
| |
| |
| ac_delim='%!_!# ' |
| for ac_last_try in false false false false false :; do |
| cat >conf$$subs.sed <<_ACEOF |
| SHELL!$SHELL$ac_delim |
| PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim |
| PACKAGE_NAME!$PACKAGE_NAME$ac_delim |
| PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim |
| PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim |
| PACKAGE_STRING!$PACKAGE_STRING$ac_delim |
| PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim |
| exec_prefix!$exec_prefix$ac_delim |
| prefix!$prefix$ac_delim |
| program_transform_name!$program_transform_name$ac_delim |
| bindir!$bindir$ac_delim |
| sbindir!$sbindir$ac_delim |
| libexecdir!$libexecdir$ac_delim |
| datarootdir!$datarootdir$ac_delim |
| datadir!$datadir$ac_delim |
| sysconfdir!$sysconfdir$ac_delim |
| sharedstatedir!$sharedstatedir$ac_delim |
| localstatedir!$localstatedir$ac_delim |
| includedir!$includedir$ac_delim |
| oldincludedir!$oldincludedir$ac_delim |
| docdir!$docdir$ac_delim |
| infodir!$infodir$ac_delim |
| htmldir!$htmldir$ac_delim |
| dvidir!$dvidir$ac_delim |
| pdfdir!$pdfdir$ac_delim |
| psdir!$psdir$ac_delim |
| libdir!$libdir$ac_delim |
| localedir!$localedir$ac_delim |
| mandir!$mandir$ac_delim |
| DEFS!$DEFS$ac_delim |
| ECHO_C!$ECHO_C$ac_delim |
| ECHO_N!$ECHO_N$ac_delim |
| ECHO_T!$ECHO_T$ac_delim |
| LIBS!$LIBS$ac_delim |
| build_alias!$build_alias$ac_delim |
| host_alias!$host_alias$ac_delim |
| target_alias!$target_alias$ac_delim |
| LLVM_SRC!$LLVM_SRC$ac_delim |
| LLVM_OBJ!$LLVM_OBJ$ac_delim |
| POOLALLOC_SRC!$POOLALLOC_SRC$ac_delim |
| POOLALLOC_OBJ!$POOLALLOC_OBJ$ac_delim |
| LIBOBJS!$LIBOBJS$ac_delim |
| LTLIBOBJS!$LTLIBOBJS$ac_delim |
| _ACEOF |
| |
| if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 43; then |
| break |
| elif $ac_last_try; then |
| { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 |
| echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} |
| { (exit 1); exit 1; }; } |
| else |
| ac_delim="$ac_delim!$ac_delim _$ac_delim!! " |
| fi |
| done |
| |
| ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` |
| if test -n "$ac_eof"; then |
| ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` |
| ac_eof=`expr $ac_eof + 1` |
| fi |
| |
| cat >>$CONFIG_STATUS <<_ACEOF |
| cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof |
| /@[a-zA-Z_][a-zA-Z_0-9]*@/!b end |
| _ACEOF |
| sed ' |
| s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g |
| s/^/s,@/; s/!/@,|#_!!_#|/ |
| :n |
| t n |
| s/'"$ac_delim"'$/,g/; t |
| s/$/\\/; p |
| N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n |
| ' >>$CONFIG_STATUS <conf$$subs.sed |
| rm -f conf$$subs.sed |
| cat >>$CONFIG_STATUS <<_ACEOF |
| :end |
| s/|#_!!_#|//g |
| CEOF$ac_eof |
| _ACEOF |
| |
| |
| # VPATH may cause trouble with some makes, so we remove $(srcdir), |
| # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and |
| # trailing colons and then remove the whole line if VPATH becomes empty |
| # (actually we leave an empty line to preserve line numbers). |
| if test "x$srcdir" = x.; then |
| ac_vpsub='/^[ ]*VPATH[ ]*=/{ |
| s/:*\$(srcdir):*/:/ |
| s/:*\${srcdir}:*/:/ |
| s/:*@srcdir@:*/:/ |
| s/^\([^=]*=[ ]*\):*/\1/ |
| s/:*$// |
| s/^[^=]*=[ ]*$// |
| }' |
| fi |
| |
| cat >>$CONFIG_STATUS <<\_ACEOF |
| fi # test -n "$CONFIG_FILES" |
| |
| |
| for ac_tag in :F $CONFIG_FILES :C $CONFIG_COMMANDS |
| do |
| case $ac_tag in |
| :[FHLC]) ac_mode=$ac_tag; continue;; |
| esac |
| case $ac_mode$ac_tag in |
| :[FHL]*:*);; |
| :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 |
| echo "$as_me: error: Invalid tag $ac_tag." >&2;} |
| { (exit 1); exit 1; }; };; |
| :[FH]-) ac_tag=-:-;; |
| :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; |
| esac |
| ac_save_IFS=$IFS |
| IFS=: |
| set x $ac_tag |
| IFS=$ac_save_IFS |
| shift |
| ac_file=$1 |
| shift |
| |
| case $ac_mode in |
| :L) ac_source=$1;; |
| :[FH]) |
| ac_file_inputs= |
| for ac_f |
| do |
| case $ac_f in |
| -) ac_f="$tmp/stdin";; |
| *) # Look for the file first in the build tree, then in the source tree |
| # (if the path is not absolute). The absolute path cannot be DOS-style, |
| # because $ac_f cannot contain `:'. |
| test -f "$ac_f" || |
| case $ac_f in |
| [\\/$]*) false;; |
| *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; |
| esac || |
| { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 |
| echo "$as_me: error: cannot find input file: $ac_f" >&2;} |
| { (exit 1); exit 1; }; };; |
| esac |
| ac_file_inputs="$ac_file_inputs $ac_f" |
| done |
| |
| # Let's still pretend it is `configure' which instantiates (i.e., don't |
| # use $as_me), people would be surprised to read: |
| # /* config.h. Generated by config.status. */ |
| configure_input="Generated from "`IFS=: |
| echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." |
| if test x"$ac_file" != x-; then |
| configure_input="$ac_file. $configure_input" |
| { echo "$as_me:$LINENO: creating $ac_file" >&5 |
| echo "$as_me: creating $ac_file" >&6;} |
| fi |
| |
| case $ac_tag in |
| *:-:* | *:-) cat >"$tmp/stdin";; |
| esac |
| ;; |
| esac |
| |
| ac_dir=`$as_dirname -- "$ac_file" || |
| $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| X"$ac_file" : 'X\(//\)[^/]' \| \ |
| X"$ac_file" : 'X\(//\)$' \| \ |
| X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || |
| echo X"$ac_file" | |
| sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| s//\1/ |
| q |
| } |
| /^X\(\/\/\)[^/].*/{ |
| s//\1/ |
| q |
| } |
| /^X\(\/\/\)$/{ |
| s//\1/ |
| q |
| } |
| /^X\(\/\).*/{ |
| s//\1/ |
| q |
| } |
| s/.*/./; q'` |
| { as_dir="$ac_dir" |
| case $as_dir in #( |
| -*) as_dir=./$as_dir;; |
| esac |
| test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { |
| as_dirs= |
| while :; do |
| case $as_dir in #( |
| *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( |
| *) as_qdir=$as_dir;; |
| esac |
| as_dirs="'$as_qdir' $as_dirs" |
| as_dir=`$as_dirname -- "$as_dir" || |
| $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
| X"$as_dir" : 'X\(//\)[^/]' \| \ |
| X"$as_dir" : 'X\(//\)$' \| \ |
| X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || |
| echo X"$as_dir" | |
| sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
| s//\1/ |
| q |
| } |
| /^X\(\/\/\)[^/].*/{ |
| s//\1/ |
| q |
| } |
| /^X\(\/\/\)$/{ |
| s//\1/ |
| q |
| } |
| /^X\(\/\).*/{ |
| s//\1/ |
| q |
| } |
| s/.*/./; q'` |
| test -d "$as_dir" && break |
| done |
| test -z "$as_dirs" || eval "mkdir $as_dirs" |
| } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 |
| echo "$as_me: error: cannot create directory $as_dir" >&2;} |
| { (exit 1); exit 1; }; }; } |
| ac_builddir=. |
| |
| case "$ac_dir" in |
| .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| *) |
| ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` |
| # A ".." for each directory in $ac_dir_suffix. |
| ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` |
| case $ac_top_builddir_sub in |
| "") ac_top_builddir_sub=. ac_top_build_prefix= ;; |
| *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; |
| esac ;; |
| esac |
| ac_abs_top_builddir=$ac_pwd |
| ac_abs_builddir=$ac_pwd$ac_dir_suffix |
| # for backward compatibility: |
| ac_top_builddir=$ac_top_build_prefix |
| |
| case $srcdir in |
| .) # We are building in place. |
| ac_srcdir=. |
| ac_top_srcdir=$ac_top_builddir_sub |
| ac_abs_top_srcdir=$ac_pwd ;; |
| [\\/]* | ?:[\\/]* ) # Absolute name. |
| ac_srcdir=$srcdir$ac_dir_suffix; |
| ac_top_srcdir=$srcdir |
| ac_abs_top_srcdir=$srcdir ;; |
| *) # Relative name. |
| ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix |
| ac_top_srcdir=$ac_top_build_prefix$srcdir |
| ac_abs_top_srcdir=$ac_pwd/$srcdir ;; |
| esac |
| ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix |
| |
| |
| case $ac_mode in |
| :F) |
| # |
| # CONFIG_FILE |
| # |
| |
| _ACEOF |
| |
| cat >>$CONFIG_STATUS <<\_ACEOF |
| # If the template does not know about datarootdir, expand it. |
| # FIXME: This hack should be removed a few years after 2.60. |
| ac_datarootdir_hack=; ac_datarootdir_seen= |
| |
| case `sed -n '/datarootdir/ { |
| p |
| q |
| } |
| /@datadir@/p |
| /@docdir@/p |
| /@infodir@/p |
| /@localedir@/p |
| /@mandir@/p |
| ' $ac_file_inputs` in |
| *datarootdir*) ac_datarootdir_seen=yes;; |
| *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) |
| { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 |
| echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} |
| _ACEOF |
| cat >>$CONFIG_STATUS <<_ACEOF |
| ac_datarootdir_hack=' |
| s&@datadir@&$datadir&g |
| s&@docdir@&$docdir&g |
| s&@infodir@&$infodir&g |
| s&@localedir@&$localedir&g |
| s&@mandir@&$mandir&g |
| s&\\\${datarootdir}&$datarootdir&g' ;; |
| esac |
| _ACEOF |
| |
| # Neutralize VPATH when `$srcdir' = `.'. |
| # Shell code in configure.ac might set extrasub. |
| # FIXME: do we really want to maintain this feature? |
| cat >>$CONFIG_STATUS <<_ACEOF |
| sed "$ac_vpsub |
| $extrasub |
| _ACEOF |
| cat >>$CONFIG_STATUS <<\_ACEOF |
| :t |
| /@[a-zA-Z_][a-zA-Z_0-9]*@/!b |
| s&@configure_input@&$configure_input&;t t |
| s&@top_builddir@&$ac_top_builddir_sub&;t t |
| s&@srcdir@&$ac_srcdir&;t t |
| s&@abs_srcdir@&$ac_abs_srcdir&;t t |
| s&@top_srcdir@&$ac_top_srcdir&;t t |
| s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t |
| s&@builddir@&$ac_builddir&;t t |
| s&@abs_builddir@&$ac_abs_builddir&;t t |
| s&@abs_top_builddir@&$ac_abs_top_builddir&;t t |
| $ac_datarootdir_hack |
| " $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out |
| |
| test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && |
| { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && |
| { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && |
| { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' |
| which seems to be undefined. Please make sure it is defined." >&5 |
| echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' |
| which seems to be undefined. Please make sure it is defined." >&2;} |
| |
| rm -f "$tmp/stdin" |
| case $ac_file in |
| -) cat "$tmp/out"; rm -f "$tmp/out";; |
| *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; |
| esac |
| ;; |
| |
| |
| :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 |
| echo "$as_me: executing $ac_file commands" >&6;} |
| ;; |
| esac |
| |
| |
| case $ac_file$ac_mode in |
| "Makefile":C) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/Makefile Makefile ;; |
| "Makefile.common":C) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/Makefile.common Makefile.common ;; |
| "lib/Makefile":C) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/lib/Makefile lib/Makefile ;; |
| "lib/Snapshot/Makefile":C) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/lib/Snapshot/Makefile lib/Snapshot/Makefile ;; |
| "tools/Makefile":C) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/tools/Makefile tools/Makefile ;; |
| "tools/llvm-tv/Makefile":C) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/tools/llvm-tv/Makefile tools/llvm-tv/Makefile ;; |
| |
| esac |
| done # for ac_tag |
| |
| |
| { (exit 0); exit 0; } |
| _ACEOF |
| chmod +x $CONFIG_STATUS |
| ac_clean_files=$ac_clean_files_save |
| |
| |
| # configure is writing to config.log, and then calls config.status. |
| # config.status does its own redirection, appending to config.log. |
| # Unfortunately, on DOS this fails, as config.log is still kept open |
| # by configure, so config.status won't be able to write to it; its |
| # output is simply discarded. So we exec the FD to /dev/null, |
| # effectively closing config.log, so it can be properly (re)opened and |
| # appended to by config.status. When coming back to configure, we |
| # need to make the FD available again. |
| if test "$no_create" != yes; then |
| ac_cs_success=: |
| ac_config_status_args= |
| test "$silent" = yes && |
| ac_config_status_args="$ac_config_status_args --quiet" |
| exec 5>/dev/null |
| $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false |
| exec 5>>config.log |
| # Use ||, not &&, to avoid exiting from the if with $? = 1, which |
| # would make configure fail if this is the last instruction. |
| $ac_cs_success || { (exit 1); exit 1; } |
| fi |
| |