| /* Functions specific to running gdb native on IA-64 running |
| GNU/Linux. |
| |
| Copyright (C) 1999-2012 Free Software Foundation, Inc. |
| |
| This file is part of GDB. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 3 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ |
| |
| #include "defs.h" |
| #include "gdb_string.h" |
| #include "inferior.h" |
| #include "target.h" |
| #include "gdbcore.h" |
| #include "regcache.h" |
| #include "ia64-tdep.h" |
| #include "linux-nat.h" |
| |
| #include <signal.h> |
| #include <sys/ptrace.h> |
| #include "gdb_wait.h" |
| #ifdef HAVE_SYS_REG_H |
| #include <sys/reg.h> |
| #endif |
| #include <sys/syscall.h> |
| #include <sys/user.h> |
| |
| #include <asm/ptrace_offsets.h> |
| #include <sys/procfs.h> |
| |
| /* Prototypes for supply_gregset etc. */ |
| #include "gregset.h" |
| |
| /* These must match the order of the register names. |
| |
| Some sort of lookup table is needed because the offsets associated |
| with the registers are all over the board. */ |
| |
| static int u_offsets[] = |
| { |
| /* general registers */ |
| -1, /* gr0 not available; i.e, it's always zero. */ |
| PT_R1, |
| PT_R2, |
| PT_R3, |
| PT_R4, |
| PT_R5, |
| PT_R6, |
| PT_R7, |
| PT_R8, |
| PT_R9, |
| PT_R10, |
| PT_R11, |
| PT_R12, |
| PT_R13, |
| PT_R14, |
| PT_R15, |
| PT_R16, |
| PT_R17, |
| PT_R18, |
| PT_R19, |
| PT_R20, |
| PT_R21, |
| PT_R22, |
| PT_R23, |
| PT_R24, |
| PT_R25, |
| PT_R26, |
| PT_R27, |
| PT_R28, |
| PT_R29, |
| PT_R30, |
| PT_R31, |
| /* gr32 through gr127 not directly available via the ptrace interface. */ |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, |
| /* Floating point registers */ |
| -1, -1, /* f0 and f1 not available (f0 is +0.0 and f1 is +1.0). */ |
| PT_F2, |
| PT_F3, |
| PT_F4, |
| PT_F5, |
| PT_F6, |
| PT_F7, |
| PT_F8, |
| PT_F9, |
| PT_F10, |
| PT_F11, |
| PT_F12, |
| PT_F13, |
| PT_F14, |
| PT_F15, |
| PT_F16, |
| PT_F17, |
| PT_F18, |
| PT_F19, |
| PT_F20, |
| PT_F21, |
| PT_F22, |
| PT_F23, |
| PT_F24, |
| PT_F25, |
| PT_F26, |
| PT_F27, |
| PT_F28, |
| PT_F29, |
| PT_F30, |
| PT_F31, |
| PT_F32, |
| PT_F33, |
| PT_F34, |
| PT_F35, |
| PT_F36, |
| PT_F37, |
| PT_F38, |
| PT_F39, |
| PT_F40, |
| PT_F41, |
| PT_F42, |
| PT_F43, |
| PT_F44, |
| PT_F45, |
| PT_F46, |
| PT_F47, |
| PT_F48, |
| PT_F49, |
| PT_F50, |
| PT_F51, |
| PT_F52, |
| PT_F53, |
| PT_F54, |
| PT_F55, |
| PT_F56, |
| PT_F57, |
| PT_F58, |
| PT_F59, |
| PT_F60, |
| PT_F61, |
| PT_F62, |
| PT_F63, |
| PT_F64, |
| PT_F65, |
| PT_F66, |
| PT_F67, |
| PT_F68, |
| PT_F69, |
| PT_F70, |
| PT_F71, |
| PT_F72, |
| PT_F73, |
| PT_F74, |
| PT_F75, |
| PT_F76, |
| PT_F77, |
| PT_F78, |
| PT_F79, |
| PT_F80, |
| PT_F81, |
| PT_F82, |
| PT_F83, |
| PT_F84, |
| PT_F85, |
| PT_F86, |
| PT_F87, |
| PT_F88, |
| PT_F89, |
| PT_F90, |
| PT_F91, |
| PT_F92, |
| PT_F93, |
| PT_F94, |
| PT_F95, |
| PT_F96, |
| PT_F97, |
| PT_F98, |
| PT_F99, |
| PT_F100, |
| PT_F101, |
| PT_F102, |
| PT_F103, |
| PT_F104, |
| PT_F105, |
| PT_F106, |
| PT_F107, |
| PT_F108, |
| PT_F109, |
| PT_F110, |
| PT_F111, |
| PT_F112, |
| PT_F113, |
| PT_F114, |
| PT_F115, |
| PT_F116, |
| PT_F117, |
| PT_F118, |
| PT_F119, |
| PT_F120, |
| PT_F121, |
| PT_F122, |
| PT_F123, |
| PT_F124, |
| PT_F125, |
| PT_F126, |
| PT_F127, |
| /* Predicate registers - we don't fetch these individually. */ |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| /* branch registers */ |
| PT_B0, |
| PT_B1, |
| PT_B2, |
| PT_B3, |
| PT_B4, |
| PT_B5, |
| PT_B6, |
| PT_B7, |
| /* Virtual frame pointer and virtual return address pointer. */ |
| -1, -1, |
| /* other registers */ |
| PT_PR, |
| PT_CR_IIP, /* ip */ |
| PT_CR_IPSR, /* psr */ |
| PT_CFM, /* cfm */ |
| /* kernel registers not visible via ptrace interface (?) */ |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| /* hole */ |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| PT_AR_RSC, |
| PT_AR_BSP, |
| PT_AR_BSPSTORE, |
| PT_AR_RNAT, |
| -1, |
| -1, /* Not available: FCR, IA32 floating control register. */ |
| -1, -1, |
| -1, /* Not available: EFLAG */ |
| -1, /* Not available: CSD */ |
| -1, /* Not available: SSD */ |
| -1, /* Not available: CFLG */ |
| -1, /* Not available: FSR */ |
| -1, /* Not available: FIR */ |
| -1, /* Not available: FDR */ |
| -1, |
| PT_AR_CCV, |
| -1, -1, -1, |
| PT_AR_UNAT, |
| -1, -1, -1, |
| PT_AR_FPSR, |
| -1, -1, -1, |
| -1, /* Not available: ITC */ |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, |
| PT_AR_PFS, |
| PT_AR_LC, |
| PT_AR_EC, |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, |
| /* nat bits - not fetched directly; instead we obtain these bits from |
| either rnat or unat or from memory. */ |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| }; |
| |
| static CORE_ADDR |
| ia64_register_addr (struct gdbarch *gdbarch, int regno) |
| { |
| CORE_ADDR addr; |
| |
| if (regno < 0 || regno >= gdbarch_num_regs (gdbarch)) |
| error (_("Invalid register number %d."), regno); |
| |
| if (u_offsets[regno] == -1) |
| addr = 0; |
| else |
| addr = (CORE_ADDR) u_offsets[regno]; |
| |
| return addr; |
| } |
| |
| static int |
| ia64_cannot_fetch_register (struct gdbarch *gdbarch, int regno) |
| { |
| return regno < 0 |
| || regno >= gdbarch_num_regs (gdbarch) |
| || u_offsets[regno] == -1; |
| } |
| |
| static int |
| ia64_cannot_store_register (struct gdbarch *gdbarch, int regno) |
| { |
| /* Rationale behind not permitting stores to bspstore... |
| |
| The IA-64 architecture provides bspstore and bsp which refer |
| memory locations in the RSE's backing store. bspstore is the |
| next location which will be written when the RSE needs to write |
| to memory. bsp is the address at which r32 in the current frame |
| would be found if it were written to the backing store. |
| |
| The IA-64 architecture provides read-only access to bsp and |
| read/write access to bspstore (but only when the RSE is in |
| the enforced lazy mode). It should be noted that stores |
| to bspstore also affect the value of bsp. Changing bspstore |
| does not affect the number of dirty entries between bspstore |
| and bsp, so changing bspstore by N words will also cause bsp |
| to be changed by (roughly) N as well. (It could be N-1 or N+1 |
| depending upon where the NaT collection bits fall.) |
| |
| OTOH, the Linux kernel provides read/write access to bsp (and |
| currently read/write access to bspstore as well). But it |
| is definitely the case that if you change one, the other |
| will change at the same time. It is more useful to gdb to |
| be able to change bsp. So in order to prevent strange and |
| undesirable things from happening when a dummy stack frame |
| is popped (after calling an inferior function), we allow |
| bspstore to be read, but not written. (Note that popping |
| a (generic) dummy stack frame causes all registers that |
| were previously read from the inferior process to be written |
| back.) */ |
| |
| return regno < 0 |
| || regno >= gdbarch_num_regs (gdbarch) |
| || u_offsets[regno] == -1 |
| || regno == IA64_BSPSTORE_REGNUM; |
| } |
| |
| void |
| supply_gregset (struct regcache *regcache, const gregset_t *gregsetp) |
| { |
| int regi; |
| const greg_t *regp = (const greg_t *) gregsetp; |
| |
| for (regi = IA64_GR0_REGNUM; regi <= IA64_GR31_REGNUM; regi++) |
| { |
| regcache_raw_supply (regcache, regi, regp + (regi - IA64_GR0_REGNUM)); |
| } |
| |
| /* FIXME: NAT collection bits are at index 32; gotta deal with these |
| somehow... */ |
| |
| regcache_raw_supply (regcache, IA64_PR_REGNUM, regp + 33); |
| |
| for (regi = IA64_BR0_REGNUM; regi <= IA64_BR7_REGNUM; regi++) |
| { |
| regcache_raw_supply (regcache, regi, |
| regp + 34 + (regi - IA64_BR0_REGNUM)); |
| } |
| |
| regcache_raw_supply (regcache, IA64_IP_REGNUM, regp + 42); |
| regcache_raw_supply (regcache, IA64_CFM_REGNUM, regp + 43); |
| regcache_raw_supply (regcache, IA64_PSR_REGNUM, regp + 44); |
| regcache_raw_supply (regcache, IA64_RSC_REGNUM, regp + 45); |
| regcache_raw_supply (regcache, IA64_BSP_REGNUM, regp + 46); |
| regcache_raw_supply (regcache, IA64_BSPSTORE_REGNUM, regp + 47); |
| regcache_raw_supply (regcache, IA64_RNAT_REGNUM, regp + 48); |
| regcache_raw_supply (regcache, IA64_CCV_REGNUM, regp + 49); |
| regcache_raw_supply (regcache, IA64_UNAT_REGNUM, regp + 50); |
| regcache_raw_supply (regcache, IA64_FPSR_REGNUM, regp + 51); |
| regcache_raw_supply (regcache, IA64_PFS_REGNUM, regp + 52); |
| regcache_raw_supply (regcache, IA64_LC_REGNUM, regp + 53); |
| regcache_raw_supply (regcache, IA64_EC_REGNUM, regp + 54); |
| } |
| |
| void |
| fill_gregset (const struct regcache *regcache, gregset_t *gregsetp, int regno) |
| { |
| int regi; |
| greg_t *regp = (greg_t *) gregsetp; |
| |
| #define COPY_REG(_idx_,_regi_) \ |
| if ((regno == -1) || regno == _regi_) \ |
| regcache_raw_collect (regcache, _regi_, regp + _idx_) |
| |
| for (regi = IA64_GR0_REGNUM; regi <= IA64_GR31_REGNUM; regi++) |
| { |
| COPY_REG (regi - IA64_GR0_REGNUM, regi); |
| } |
| |
| /* FIXME: NAT collection bits at index 32? */ |
| |
| COPY_REG (33, IA64_PR_REGNUM); |
| |
| for (regi = IA64_BR0_REGNUM; regi <= IA64_BR7_REGNUM; regi++) |
| { |
| COPY_REG (34 + (regi - IA64_BR0_REGNUM), regi); |
| } |
| |
| COPY_REG (42, IA64_IP_REGNUM); |
| COPY_REG (43, IA64_CFM_REGNUM); |
| COPY_REG (44, IA64_PSR_REGNUM); |
| COPY_REG (45, IA64_RSC_REGNUM); |
| COPY_REG (46, IA64_BSP_REGNUM); |
| COPY_REG (47, IA64_BSPSTORE_REGNUM); |
| COPY_REG (48, IA64_RNAT_REGNUM); |
| COPY_REG (49, IA64_CCV_REGNUM); |
| COPY_REG (50, IA64_UNAT_REGNUM); |
| COPY_REG (51, IA64_FPSR_REGNUM); |
| COPY_REG (52, IA64_PFS_REGNUM); |
| COPY_REG (53, IA64_LC_REGNUM); |
| COPY_REG (54, IA64_EC_REGNUM); |
| } |
| |
| /* Given a pointer to a floating point register set in /proc format |
| (fpregset_t *), unpack the register contents and supply them as gdb's |
| idea of the current floating point register values. */ |
| |
| void |
| supply_fpregset (struct regcache *regcache, const fpregset_t *fpregsetp) |
| { |
| int regi; |
| const char *from; |
| const gdb_byte f_zero[16] = { 0 }; |
| const gdb_byte f_one[16] = |
| { 0, 0, 0, 0, 0, 0, 0, 0x80, 0xff, 0xff, 0, 0, 0, 0, 0, 0 }; |
| |
| /* Kernel generated cores have fr1==0 instead of 1.0. Older GDBs |
| did the same. So ignore whatever might be recorded in fpregset_t |
| for fr0/fr1 and always supply their expected values. */ |
| |
| /* fr0 is always read as zero. */ |
| regcache_raw_supply (regcache, IA64_FR0_REGNUM, f_zero); |
| /* fr1 is always read as one (1.0). */ |
| regcache_raw_supply (regcache, IA64_FR1_REGNUM, f_one); |
| |
| for (regi = IA64_FR2_REGNUM; regi <= IA64_FR127_REGNUM; regi++) |
| { |
| from = (const char *) &((*fpregsetp)[regi - IA64_FR0_REGNUM]); |
| regcache_raw_supply (regcache, regi, from); |
| } |
| } |
| |
| /* Given a pointer to a floating point register set in /proc format |
| (fpregset_t *), update the register specified by REGNO from gdb's idea |
| of the current floating point register set. If REGNO is -1, update |
| them all. */ |
| |
| void |
| fill_fpregset (const struct regcache *regcache, |
| fpregset_t *fpregsetp, int regno) |
| { |
| int regi; |
| |
| for (regi = IA64_FR0_REGNUM; regi <= IA64_FR127_REGNUM; regi++) |
| { |
| if ((regno == -1) || (regno == regi)) |
| regcache_raw_collect (regcache, regi, |
| &((*fpregsetp)[regi - IA64_FR0_REGNUM])); |
| } |
| } |
| |
| #define IA64_PSR_DB (1UL << 24) |
| #define IA64_PSR_DD (1UL << 39) |
| |
| static void |
| enable_watchpoints_in_psr (ptid_t ptid) |
| { |
| struct regcache *regcache = get_thread_regcache (ptid); |
| ULONGEST psr; |
| |
| regcache_cooked_read_unsigned (regcache, IA64_PSR_REGNUM, &psr); |
| if (!(psr & IA64_PSR_DB)) |
| { |
| psr |= IA64_PSR_DB; /* Set the db bit - this enables hardware |
| watchpoints and breakpoints. */ |
| regcache_cooked_write_unsigned (regcache, IA64_PSR_REGNUM, psr); |
| } |
| } |
| |
| static long debug_registers[8]; |
| |
| static void |
| store_debug_register (ptid_t ptid, int idx, long val) |
| { |
| int tid; |
| |
| tid = TIDGET (ptid); |
| if (tid == 0) |
| tid = PIDGET (ptid); |
| |
| (void) ptrace (PT_WRITE_U, tid, (PTRACE_TYPE_ARG3) (PT_DBR + 8 * idx), val); |
| } |
| |
| static void |
| store_debug_register_pair (ptid_t ptid, int idx, long *dbr_addr, |
| long *dbr_mask) |
| { |
| if (dbr_addr) |
| store_debug_register (ptid, 2 * idx, *dbr_addr); |
| if (dbr_mask) |
| store_debug_register (ptid, 2 * idx + 1, *dbr_mask); |
| } |
| |
| static int |
| is_power_of_2 (int val) |
| { |
| int i, onecount; |
| |
| onecount = 0; |
| for (i = 0; i < 8 * sizeof (val); i++) |
| if (val & (1 << i)) |
| onecount++; |
| |
| return onecount <= 1; |
| } |
| |
| static int |
| ia64_linux_insert_watchpoint (CORE_ADDR addr, int len, int rw, |
| struct expression *cond) |
| { |
| struct lwp_info *lp; |
| int idx; |
| long dbr_addr, dbr_mask; |
| int max_watchpoints = 4; |
| |
| if (len <= 0 || !is_power_of_2 (len)) |
| return -1; |
| |
| for (idx = 0; idx < max_watchpoints; idx++) |
| { |
| dbr_mask = debug_registers[idx * 2 + 1]; |
| if ((dbr_mask & (0x3UL << 62)) == 0) |
| { |
| /* Exit loop if both r and w bits clear. */ |
| break; |
| } |
| } |
| |
| if (idx == max_watchpoints) |
| return -1; |
| |
| dbr_addr = (long) addr; |
| dbr_mask = (~(len - 1) & 0x00ffffffffffffffL); /* construct mask to match */ |
| dbr_mask |= 0x0800000000000000L; /* Only match privilege level 3 */ |
| switch (rw) |
| { |
| case hw_write: |
| dbr_mask |= (1L << 62); /* Set w bit */ |
| break; |
| case hw_read: |
| dbr_mask |= (1L << 63); /* Set r bit */ |
| break; |
| case hw_access: |
| dbr_mask |= (3L << 62); /* Set both r and w bits */ |
| break; |
| default: |
| return -1; |
| } |
| |
| debug_registers[2 * idx] = dbr_addr; |
| debug_registers[2 * idx + 1] = dbr_mask; |
| ALL_LWPS (lp) |
| { |
| store_debug_register_pair (lp->ptid, idx, &dbr_addr, &dbr_mask); |
| enable_watchpoints_in_psr (lp->ptid); |
| } |
| |
| return 0; |
| } |
| |
| static int |
| ia64_linux_remove_watchpoint (CORE_ADDR addr, int len, int type, |
| struct expression *cond) |
| { |
| int idx; |
| long dbr_addr, dbr_mask; |
| int max_watchpoints = 4; |
| |
| if (len <= 0 || !is_power_of_2 (len)) |
| return -1; |
| |
| for (idx = 0; idx < max_watchpoints; idx++) |
| { |
| dbr_addr = debug_registers[2 * idx]; |
| dbr_mask = debug_registers[2 * idx + 1]; |
| if ((dbr_mask & (0x3UL << 62)) && addr == (CORE_ADDR) dbr_addr) |
| { |
| struct lwp_info *lp; |
| |
| debug_registers[2 * idx] = 0; |
| debug_registers[2 * idx + 1] = 0; |
| dbr_addr = 0; |
| dbr_mask = 0; |
| |
| ALL_LWPS (lp) |
| store_debug_register_pair (lp->ptid, idx, &dbr_addr, &dbr_mask); |
| |
| return 0; |
| } |
| } |
| return -1; |
| } |
| |
| static void |
| ia64_linux_new_thread (struct lwp_info *lp) |
| { |
| int i, any; |
| |
| any = 0; |
| for (i = 0; i < 8; i++) |
| { |
| if (debug_registers[i] != 0) |
| any = 1; |
| store_debug_register (lp->ptid, i, debug_registers[i]); |
| } |
| |
| if (any) |
| enable_watchpoints_in_psr (lp->ptid); |
| } |
| |
| static int |
| ia64_linux_stopped_data_address (struct target_ops *ops, CORE_ADDR *addr_p) |
| { |
| CORE_ADDR psr; |
| siginfo_t siginfo; |
| struct regcache *regcache = get_current_regcache (); |
| |
| if (!linux_nat_get_siginfo (inferior_ptid, &siginfo)) |
| return 0; |
| |
| if (siginfo.si_signo != SIGTRAP |
| || (siginfo.si_code & 0xffff) != 0x0004 /* TRAP_HWBKPT */) |
| return 0; |
| |
| regcache_cooked_read_unsigned (regcache, IA64_PSR_REGNUM, &psr); |
| psr |= IA64_PSR_DD; /* Set the dd bit - this will disable the watchpoint |
| for the next instruction. */ |
| regcache_cooked_write_unsigned (regcache, IA64_PSR_REGNUM, psr); |
| |
| *addr_p = (CORE_ADDR) siginfo.si_addr; |
| return 1; |
| } |
| |
| static int |
| ia64_linux_stopped_by_watchpoint (void) |
| { |
| CORE_ADDR addr; |
| return ia64_linux_stopped_data_address (¤t_target, &addr); |
| } |
| |
| static int |
| ia64_linux_can_use_hw_breakpoint (int type, int cnt, int othertype) |
| { |
| return 1; |
| } |
| |
| |
| /* Fetch register REGNUM from the inferior. */ |
| |
| static void |
| ia64_linux_fetch_register (struct regcache *regcache, int regnum) |
| { |
| struct gdbarch *gdbarch = get_regcache_arch (regcache); |
| CORE_ADDR addr; |
| size_t size; |
| PTRACE_TYPE_RET *buf; |
| int pid, i; |
| |
| /* r0 cannot be fetched but is always zero. */ |
| if (regnum == IA64_GR0_REGNUM) |
| { |
| const gdb_byte zero[8] = { 0 }; |
| |
| gdb_assert (sizeof (zero) == register_size (gdbarch, regnum)); |
| regcache_raw_supply (regcache, regnum, zero); |
| return; |
| } |
| |
| /* fr0 cannot be fetched but is always zero. */ |
| if (regnum == IA64_FR0_REGNUM) |
| { |
| const gdb_byte f_zero[16] = { 0 }; |
| |
| gdb_assert (sizeof (f_zero) == register_size (gdbarch, regnum)); |
| regcache_raw_supply (regcache, regnum, f_zero); |
| return; |
| } |
| |
| /* fr1 cannot be fetched but is always one (1.0). */ |
| if (regnum == IA64_FR1_REGNUM) |
| { |
| const gdb_byte f_one[16] = |
| { 0, 0, 0, 0, 0, 0, 0, 0x80, 0xff, 0xff, 0, 0, 0, 0, 0, 0 }; |
| |
| gdb_assert (sizeof (f_one) == register_size (gdbarch, regnum)); |
| regcache_raw_supply (regcache, regnum, f_one); |
| return; |
| } |
| |
| if (ia64_cannot_fetch_register (gdbarch, regnum)) |
| { |
| regcache_raw_supply (regcache, regnum, NULL); |
| return; |
| } |
| |
| /* Cater for systems like GNU/Linux, that implement threads as |
| separate processes. */ |
| pid = ptid_get_lwp (inferior_ptid); |
| if (pid == 0) |
| pid = ptid_get_pid (inferior_ptid); |
| |
| /* This isn't really an address, but ptrace thinks of it as one. */ |
| addr = ia64_register_addr (gdbarch, regnum); |
| size = register_size (gdbarch, regnum); |
| |
| gdb_assert ((size % sizeof (PTRACE_TYPE_RET)) == 0); |
| buf = alloca (size); |
| |
| /* Read the register contents from the inferior a chunk at a time. */ |
| for (i = 0; i < size / sizeof (PTRACE_TYPE_RET); i++) |
| { |
| errno = 0; |
| buf[i] = ptrace (PT_READ_U, pid, (PTRACE_TYPE_ARG3)addr, 0); |
| if (errno != 0) |
| error (_("Couldn't read register %s (#%d): %s."), |
| gdbarch_register_name (gdbarch, regnum), |
| regnum, safe_strerror (errno)); |
| |
| addr += sizeof (PTRACE_TYPE_RET); |
| } |
| regcache_raw_supply (regcache, regnum, buf); |
| } |
| |
| /* Fetch register REGNUM from the inferior. If REGNUM is -1, do this |
| for all registers. */ |
| |
| static void |
| ia64_linux_fetch_registers (struct target_ops *ops, |
| struct regcache *regcache, int regnum) |
| { |
| if (regnum == -1) |
| for (regnum = 0; |
| regnum < gdbarch_num_regs (get_regcache_arch (regcache)); |
| regnum++) |
| ia64_linux_fetch_register (regcache, regnum); |
| else |
| ia64_linux_fetch_register (regcache, regnum); |
| } |
| |
| /* Store register REGNUM into the inferior. */ |
| |
| static void |
| ia64_linux_store_register (const struct regcache *regcache, int regnum) |
| { |
| struct gdbarch *gdbarch = get_regcache_arch (regcache); |
| CORE_ADDR addr; |
| size_t size; |
| PTRACE_TYPE_RET *buf; |
| int pid, i; |
| |
| if (ia64_cannot_store_register (gdbarch, regnum)) |
| return; |
| |
| /* Cater for systems like GNU/Linux, that implement threads as |
| separate processes. */ |
| pid = ptid_get_lwp (inferior_ptid); |
| if (pid == 0) |
| pid = ptid_get_pid (inferior_ptid); |
| |
| /* This isn't really an address, but ptrace thinks of it as one. */ |
| addr = ia64_register_addr (gdbarch, regnum); |
| size = register_size (gdbarch, regnum); |
| |
| gdb_assert ((size % sizeof (PTRACE_TYPE_RET)) == 0); |
| buf = alloca (size); |
| |
| /* Write the register contents into the inferior a chunk at a time. */ |
| regcache_raw_collect (regcache, regnum, buf); |
| for (i = 0; i < size / sizeof (PTRACE_TYPE_RET); i++) |
| { |
| errno = 0; |
| ptrace (PT_WRITE_U, pid, (PTRACE_TYPE_ARG3)addr, buf[i]); |
| if (errno != 0) |
| error (_("Couldn't write register %s (#%d): %s."), |
| gdbarch_register_name (gdbarch, regnum), |
| regnum, safe_strerror (errno)); |
| |
| addr += sizeof (PTRACE_TYPE_RET); |
| } |
| } |
| |
| /* Store register REGNUM back into the inferior. If REGNUM is -1, do |
| this for all registers. */ |
| |
| static void |
| ia64_linux_store_registers (struct target_ops *ops, |
| struct regcache *regcache, int regnum) |
| { |
| if (regnum == -1) |
| for (regnum = 0; |
| regnum < gdbarch_num_regs (get_regcache_arch (regcache)); |
| regnum++) |
| ia64_linux_store_register (regcache, regnum); |
| else |
| ia64_linux_store_register (regcache, regnum); |
| } |
| |
| |
| static LONGEST (*super_xfer_partial) (struct target_ops *, enum target_object, |
| const char *, gdb_byte *, |
| const gdb_byte *, ULONGEST, LONGEST); |
| |
| static LONGEST |
| ia64_linux_xfer_partial (struct target_ops *ops, |
| enum target_object object, |
| const char *annex, |
| gdb_byte *readbuf, const gdb_byte *writebuf, |
| ULONGEST offset, LONGEST len) |
| { |
| if (object == TARGET_OBJECT_UNWIND_TABLE && writebuf == NULL && offset == 0) |
| return syscall (__NR_getunwind, readbuf, len); |
| |
| return super_xfer_partial (ops, object, annex, readbuf, writebuf, |
| offset, len); |
| } |
| |
| /* For break.b instruction ia64 CPU forgets the immediate value and generates |
| SIGILL with ILL_ILLOPC instead of more common SIGTRAP with TRAP_BRKPT. |
| ia64 does not use gdbarch_decr_pc_after_break so we do not have to make any |
| difference for the signals here. */ |
| |
| static int |
| ia64_linux_status_is_event (int status) |
| { |
| return WIFSTOPPED (status) && (WSTOPSIG (status) == SIGTRAP |
| || WSTOPSIG (status) == SIGILL); |
| } |
| |
| void _initialize_ia64_linux_nat (void); |
| |
| void |
| _initialize_ia64_linux_nat (void) |
| { |
| struct target_ops *t; |
| |
| /* Fill in the generic GNU/Linux methods. */ |
| t = linux_target (); |
| |
| /* Override the default fetch/store register routines. */ |
| t->to_fetch_registers = ia64_linux_fetch_registers; |
| t->to_store_registers = ia64_linux_store_registers; |
| |
| /* Override the default to_xfer_partial. */ |
| super_xfer_partial = t->to_xfer_partial; |
| t->to_xfer_partial = ia64_linux_xfer_partial; |
| |
| /* Override watchpoint routines. */ |
| |
| /* The IA-64 architecture can step over a watch point (without triggering |
| it again) if the "dd" (data debug fault disable) bit in the processor |
| status word is set. |
| |
| This PSR bit is set in ia64_linux_stopped_by_watchpoint when the |
| code there has determined that a hardware watchpoint has indeed |
| been hit. The CPU will then be able to execute one instruction |
| without triggering a watchpoint. */ |
| |
| t->to_have_steppable_watchpoint = 1; |
| t->to_can_use_hw_breakpoint = ia64_linux_can_use_hw_breakpoint; |
| t->to_stopped_by_watchpoint = ia64_linux_stopped_by_watchpoint; |
| t->to_stopped_data_address = ia64_linux_stopped_data_address; |
| t->to_insert_watchpoint = ia64_linux_insert_watchpoint; |
| t->to_remove_watchpoint = ia64_linux_remove_watchpoint; |
| |
| /* Register the target. */ |
| linux_nat_add_target (t); |
| linux_nat_set_new_thread (t, ia64_linux_new_thread); |
| linux_nat_set_status_is_event (t, ia64_linux_status_is_event); |
| } |