| Tue Dec 31 15:19:32 1996 Geoffrey Noer <noer@cygnus.com> |
| |
| * config/mn10300/tm-mn10300.h: more small register fixes |
| |
| Tue Dec 31 06:51:43 1996 Mark Alexander <marka@cygnus.com> |
| |
| * config/i386/xm-windows.h: Undo previous change to SIGTRAP |
| and SIGQUIT values; it messed up non-MIPS targets. |
| * config/mips/tm-mips.h: Undefine BREAKPOINT, replace |
| with separate LITTLE_BREAKPOINT and BIG_BREAKPOINT definitions; |
| this fixes problem with setting breakpoints in little-endian |
| programs in the simulator. |
| |
| Mon Dec 30 00:14:06 1996 Doug Evans <dje@seba.cygnus.com> |
| |
| * remote-sim.c (gdbsim_open_p): New static local. |
| (gdbsim_open): Call unpush_target if sim open. Set gdbsim_open_p. |
| (gdbsim_close): Only call sim_close if sim open. Reset gdbsim_open_p. |
| |
| Sun Dec 29 09:15:03 1996 Mark Alexander <marka@cygnus.com> |
| |
| * config/i386/xm-windows.h: Make SIGTRAP and SIGQUIT consistent |
| with sim/mips/support.h. |
| |
| Fri Dec 27 14:53:40 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * v850-tdep.c (struct pifsr): Add cur_frameoffset field. |
| (v850_scan_prologue): Add debug code #ifdef'ed DEBUG. Support new |
| compiler prologues using register save functions and short store |
| instructions. Add support for functions with large stack frames. |
| |
| * config/v850/tm-vm850.h ({R0,R1,R12,EP}_REGNUMS): New register |
| number defintiions for r0, r1, r12, ep. |
| (SAVE{1,2,3}_{START,END}_REGNUM): Register number definitions for |
| the 3 sets of saved registers. |
| |
| Thu Dec 26 19:56:55 1996 Mark Alexander <marka@cygnus.com> |
| |
| * valprint.c (print_longest): Don't lose upper bits |
| of 64-bit values on Windows. |
| * config/i386/xm-windows.h: Leave CC_HAS_LONG_LONG defined, |
| undefine PRINTF_HAS_LONG_LONG, so that 64-bit values will |
| be printed without loss of upper bits. |
| |
| Thu Dec 26 15:15:21 1996 Michael Snyder <msnyder@cleaver.cygnus.com> |
| |
| * config/sparc/tm-sparclet.h: make registers ASR15, ASR19 invisible |
| (they're not useful, you can't change, write or even read them) |
| |
| Thu Dec 26 15:20:48 1996 Fred Fish <fnf@cygnus.com> |
| |
| * config/pa/hppahpux.mh (TERMCAP): Always link to libc before |
| libcurses, to avoid picking up broken select() from libcurses |
| on some versions of HPUX. |
| |
| Thu Dec 26 15:14:41 1996 Michael Snyder <msnyder@cleaver.cygnus.com> |
| |
| * sparclet-rom.c: Remove includes of Unix system files. |
| Add function "sparclet_supply_register" so that parse_register_dump |
| will not seg-fault by calling a null function pointer. |
| Remove XMODEM support (unfinished work?). |
| Remove flag "MO_HANDLE_NL", so monitor's output can be read by humans. |
| Add fill command. |
| Remove colon from getreg.resp_delim so PSR register will work. |
| Remove pointer to sparclet_load (downloading SREC's doesn't work). |
| Null out local register names for %g0, all %cc and all %asr regs, |
| since the monitor can't report them. Will return zero instead. |
| * sparclet-stub.c: New -- remote protocol support for sparclet CPU. |
| * config/sparc/tm-sparclet.h: Re-arrange REGISTER_NAMES: |
| Add back %g0 and %psr, add %cc coprocessor regs, add %asr regs. |
| Adjust NUM_REGS and REGISTER_BYTES accordingly |
| |
| Tue Dec 24 10:27:37 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * remote-e7000.c (want_h8300h, want_nopc_h8300h): Renamed |
| from want and want_nopc. |
| (want_h8300s, want_nopc_h8300s): New variables for H8/S register |
| lists. |
| (e7000_fetch_registers): Use H8/300H or H8/S register list string |
| as needed. |
| (e7000_wait): Likewise. |
| |
| Mon Dec 23 02:25:58 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * mips-tdep.c (mips_find_saved_regs): If a frame has been |
| interrupted by a signal, figure out whether the registers that |
| the proc_desc claims are saved have been saved yet. |
| (mips_push_dummy_frame): Write dummy frame register after all |
| registers have been saved in the dummy frame. Update comments |
| to reflect the fact that we are now using an AT_ENTRY_POINT |
| call dummy. |
| |
| Sun Dec 22 15:52:25 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-tdep.c (d10v_skip_prologue): PR11287. Fix problem where |
| some breakpoints weren't being set. |
| |
| Sat Dec 21 12:57:59 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * config/mips/tm-mips.h (PC_IN_CALL_DUMMY): Removed, the default |
| definition in inferior.h is sufficient. |
| * mips-tdep.c (mips_pc_in_call_dummy): Ditto. |
| (mips_push_arguments): Make sure that the stack is aligned to a |
| multiple of 8 after the arguments are pushed. |
| Structures are always passed by value in the old ABI. |
| Adjust argument register value on big endian targets when passing |
| a value whose length is less than the register size. |
| Write stack arguments with a single write_memory call. |
| (mips_pop_frame): Use frame_saved_regs instead of proc_desc to |
| decide which registers have to be restored. |
| |
| * irix5-nat.c (fill_gregset): Sign extend registers before |
| filling in the gregset structure. |
| |
| Fri Dec 20 11:06:03 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * mswin/genmakes: Don't define _DEBUG. This breaks wingdb. |
| |
| Thu Dec 19 19:42:44 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * v850-tdep.c (v850_scan_prologue): Deal with -mep shorting |
| register saves by using the ep register. |
| |
| Thu Dec 19 15:57:16 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * m32r-tdep.c (m32r_frame_find_saved_regs): Fix thinko in arg def. |
| |
| Thu Dec 19 09:38:56 1996 Mark Alexander <marka@cygnus.com> |
| |
| * values.c (unpack_double): Make it compile with MSVC++ 2.x. |
| * remote-mips.c (S_IROTH): Define if not defined by stat.h, e.g. |
| when using MSVC++. |
| (common_open): Fix help string. |
| |
| Wed Dec 18 23:01:32 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * mpw-make.sed: Use NewFolderRecursive for installation. |
| |
| Sat Dec 14 20:50:01 1996 Mark Alexander <marka@cygnus.com> |
| |
| * mips-tdep.c (mips_push_arguments): Handle floating point args. |
| * config/mips/tm-mips.h (FIX_CALL_DUMMY): Define to set up $25 |
| correctly for PIC on Irix 5. |
| |
| Sat Dec 14 09:52:30 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * i386-tdep.c (i386_frame_find_saved_regs): Handle zero return |
| from get_pc_function_start gracefully. |
| |
| Sat Dec 14 00:43:57 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * c-exp.y (qualified_name): Replace explicit check for valid |
| destructor name with call to destructor_name_p. |
| |
| * c-lang.h, c-typeprint.c (cp_type_print_method_args): Removed, |
| no longer needed. |
| |
| * c-typeprint.c (c_type_print_varspec_prefix, c_type_print_base): |
| Replace remaining fprintf_unfiltered calls with their filtered variant. |
| (c_type_print_base): Do not print return type for destructors from |
| template classes. |
| Replace cp_type_print_method_args with cplus_demangle call to get |
| consistent type output for stubbed and unstubbed methods. |
| |
| * cp-valprint.c (cp_print_class_method): Replace |
| cp_type_print_method_args with cplus_demangle call to get consistent |
| type output for stubbed and unstubbed methods. |
| |
| * gdbtypes.c, gdbtypes.h (get_destructor_fn_field): New function |
| to find the destructor field indices for a type. |
| |
| * gdbtypes.h (struct type): Clarify comments for vptr_basetype |
| and arg_types fields. |
| (struct fn_field): Remove args field, no longer used. |
| |
| * symtab.c (decode_line_1), valops.c (value_struct_elt, |
| check_field_in): Use get_destructor_fn_field to find the destructor |
| field indices instead of assuming that the compiler passes the member |
| function fields in a specific order. |
| |
| * symtab.c (find_methods): Pass NULL instead of SYMBOL_BLOCK_VALUE |
| to lookup_symbol. |
| (list_symbol): Replace cp_type_print_method_args with cplus_demangle |
| call in zapped out code and explain why this code is zapped out. |
| |
| Thu Dec 12 13:29:14 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * config/powerpc/ppc{,le}-sim.mt (SIM): Add the simulator common |
| library ../sim/common/libcommon.a. |
| |
| Wed Dec 11 11:15:08 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * monitor.c (monitor_load): Add support for load address argument. |
| * dsrec.c: #include <time.h>. |
| (load_srec): New argument load_offset. Print download stats. |
| * srec.h (load_srec): Update prototype. |
| * sh3-rom.c (sh3_load): Update call to load_srec. |
| |
| Mon Dec 9 17:34:05 1996 Geoffrey Noer <noer@cygnus.com> |
| |
| * config/mn10300/tm-mn10300.h: more small register fixes |
| * mn10300-tdep.c: filled in from another target |
| |
| Mon Dec 9 17:12:19 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * monitor.c (monitor_insert_breakpoint): Handle bi-endian machines. |
| |
| Mon Dec 9 15:58:51 1996 Mark Alexander <marka@cygnus.com> |
| |
| * config/mips/tm-mips.h: Get rid of call-dummy code. |
| Minor changes to make pre-ANSI compilers happy. |
| * mips-tdep.c: Minor changes to make pre-ANSI compilers happy. |
| (mips_push_arguments): Rewrite to partially support EABI. |
| (mips_pc_in_call_dummy): New function. |
| * infcmd.c: Include symfile.h to get prototype of entry_point_address, |
| which fixes 64-bit sign extension bug on MIPS. |
| |
| Mon Dec 9 00:14:49 1996 Geoffrey Noer <noer@cygnus.com> |
| |
| * config/mn10300/tm-mn10300.h: fix register names |
| * mn10300-tdep.c: new skeleton tdep for mn10300 |
| |
| Sun Dec 8 18:02:57 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * remote-sim.h: Update some comments. |
| * remote-sim.c (gdb_os_error): New function. |
| (init_callbacks): Fix initializing of gdb_callback. Add gdb_os_error. |
| (gdb_os_printf_filtered): Use gdb_stdout, not stdout. |
| |
| Sun Dec 8 00:36:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * irix5-nat.c (supply_gregset, fill_gregset): Handle gregsets |
| from O32 and N32 ABI. |
| (xfer_link_map_member): Work around problem with alignments |
| in struct obj when compiling GDB under N32 ABI. |
| |
| Thu Dec 5 23:30:44 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * d10v-tdep.c: Add support for examination and interpretation |
| of instruction trace buffer. |
| (trace, untrace, info trace, tdisassemble): New commands. |
| |
| Thu Dec 5 14:06:23 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * config/sparc/tm-sparclet.h (TARGET_BYTE_ORDER): Undef. |
| (TARGET_BYTE_ORDER_SELECTABLE): Define. |
| (BREAKPOINT): Undef. |
| ({BIG,LITTLE}_BREAKPOINT): Define. |
| (TM_PRINT_INSN_MACH): Redefine for sparclet. |
| |
| Wed Dec 4 16:34:05 1996 Geoffrey Noer <noer@cygnus.com> |
| |
| * config/mn10300/mn10300.mt, config/mn10300/tm-mn10300.h: New. |
| |
| Tue Dec 3 13:02:08 1996 Fred Fish <fnf@ninemoons.com> |
| |
| * infptrace.c (store_inferior_registers): Move some common code out |
| to store_register, like fetch_inferior_registers & fetch_register. |
| (store_register): New function, from store_inferior_registers. |
| (fetch_inferior_registers, fetch_register): Minor code tweaks to |
| make {fetch,store}_inferior_registers and {fetch,store}_register |
| routines as similar in structure as possible. |
| (fetch_inferior_registers, store_inferior_registers): Eliminate |
| local variable numregs and just use ARCH_NUM_REGS directly. |
| |
| Tue Dec 3 11:38:14 1996 Michael Snyder <msnyder@cleaver.cygnus.com> |
| |
| * blockframe.c: add macro USE_GENERIC_DUMMY_FRAMES to enable/disable |
| code for generic call_dummy frames. |
| * config/h8300/tm-h8300.h: turn on USE_GENERIC_DUMMY_FRAMES |
| * config/m32r/tm-m32r.h: Ditto. |
| * config/sh/tm-sh.h: Ditto. |
| * config/v850/tm-v850.h: Ditto. |
| |
| Sun Dec 1 00:41:47 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * vax-tdep.c (vax_print_insn, print_insn_arg): Use info functions |
| for printing. From Valeriy Ushakov <uwe@ptc.spbu.ru>. |
| |
| Sun Dec 1 00:40:46 1996 Geoffrey Noer <noer@cygnus.com> |
| |
| * configure.tgt: Add new mn10300 entry. |
| |
| Sun Dec 1 00:18:59 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| Add support for Irix 6.2 native O32 and N32 ABI. |
| |
| * config.in, configure.in, configure: Check for <objlist.h>. |
| * configure.tgt: Handle mips*-sgi-irix6* like irix5 for now. |
| |
| * cp-valprint.c (cp_print_value_fields): Use SYMBOL_VALUE_ADDRESS |
| instead of SYMBOL_BLOCK_VALUE to get the address of a static member. |
| |
| * dwarf2read.c: Turn warnings and recoverable errors into complaints, |
| add new complaints where appropriate. |
| gcc -Wall cleanup. |
| (struct line_head): Change line_base from char to int to avoid |
| problems with compilers whose plain char is represented by an |
| unsigned char. |
| (struct partial_die_info): Add is_declaration field. |
| (dwarf2_tmp_obstack): New obstack for allocating temporary storage |
| used during symbol reading. |
| (cu_header_offset): New variable for resolving relative reference |
| dies. |
| (optimized_out, basereg, islocal, frame_base_reg, frame_base_offset): |
| New interface variables for decode_locdesc. |
| (struct dwarf2_pinfo): New structure for communication between |
| psymtab and symtab reading, passed via pst->read_symtab_private. |
| (dwarf2_has_info, dwarf2_build_psymtabs): Accept objects files |
| without line number sections. |
| (dwarf2_build_psymtabs_hard): Initialize temporary obstack |
| for symbol reading. |
| Allocate and initialize pst->read_symtab_private. |
| Relocate pst->textlow and pst->texthigh with baseaddr. |
| (scan_partial_symbols): Do not add DW_AT_declaration symbols |
| to the partial symbol table. |
| Add file scope enumerator symbols to the partial symbol table. |
| Fix typo in highpc computation. |
| If we didn't find a lowpc, set it to highpc to avoid complaints |
| from `maint check. |
| (add_partial_symbol): Relocate symbol values with baseaddr. |
| Add static DW_TAG_subprogram and DW_TAG_variable symbols to the |
| minimal symbol table. |
| Obtain symbol values for DW_TAG_variable symbols from the location |
| descriptor, skip symbols with missing location desciptors. |
| Skip symbols for aggregate types without children. |
| Handle enumerator symbols. |
| (dwarf2_psymtab_to_symtab): Issue symbol reading message if verbose. |
| (psymtab_to_symtab_1): Set local variables from |
| pst->read_symtab_private, set cu_header_offset and baseaddr. |
| Initialize temporary obstack for symbol reading, initialize |
| buildsym and add a cleanup to really_free_pendings. |
| Relocate highpc with baseaddr when calling end_symtab. |
| If the compilation is from a C file generated by language |
| preprocessors, do not set the symtab language if it was already |
| deduced by start_subfile. |
| Removed verbose sorting symbol table message. |
| (process_die): Handle DW_TAG_ptr_to_member_type and |
| DW_TAG_reference_type. |
| Use read_subroutine_type to get the function type for |
| DW_TAG_subprogram before calling read_func_scope. |
| (read_file_scope): Initialize file name to <unknown>, start_subfile |
| expects a non-NULL name. |
| If we didn't find a lowpc, set it to highpc to avoid complaints |
| from finish_symbol. |
| Relocate lowpc and highpc with baseaddr. |
| Get rid of Irix6.2 native cc compile machine prefix in comp_dir. |
| Zero out ftypes for each new compilation unit (may be different |
| language or different objfile). |
| Accept compilation units without line number information, pass |
| comp_dir to decode_lines. |
| (read_func_scope): Initialize function name to <unknown> to avoid |
| core dumps when DW_AT_name is missing. |
| Relocate lowpc and highpc with baseaddr. |
| Handle DW_AT_frame_base, keep result for DW_OP_fbreg operations. |
| Pass function type to new_symbol. |
| (read_lexical_block_scope): Relocate lowpc and highpc with baseaddr. |
| (read_structure_scope): Set TYPE_TAG_NAME, not TYPE_NAME. |
| Handle DW_TAG_class_type. |
| Copy fields to type_obstack, release temporary storage for fields. |
| Don't add symbol if die is a stub die and has no children. |
| Handle C++ static member fields. |
| (read_enumeration): Set TYPE_TAG_NAME, not TYPE_NAME. |
| Copy fields to type_obstack, release temporary storage for fields. |
| Let new_symbol handle the symbol creation for enumerators |
| instead of handcrafting a symbol. |
| Determine signedness of enum type from enumerators. |
| (dwarf_read_array_type): Handle variable length arrays. |
| Use lookup_pointer_type instead of handcrafting a type. |
| Create array type only if a DW_TAG_subrange_type was found. |
| (read_tag_pointer_type, read_tag_reference_type): |
| Use lookup_pointer_type and lookup_reference_type instead |
| of handcrafting a type. |
| (read_tag_ptr_to_member_type): New function to handle |
| DW_TAG_ptr_to_member_type. |
| (read_subroutine_type): Handle parameter dies. |
| Use lookup_function_type instead of handcrafting a type. |
| (read_typedef): Allocate a TYPE_CODE_TYPEDEF type for the typedef. |
| (read_base_type): If the type has a name, use init_type to create |
| a new type instead of second guessing a fundamental type. |
| (read_comp_unit): Reset die reference table before building |
| a new one. |
| (dwarf2_read_section): Read section contents into psymbol_obstack. |
| (dwarf2_read_abbrevs): Handle unterminated abbreviations |
| for a compile unit gracefully. |
| (read_partial_die): Zero partial die before reading its info. |
| Handle DW_AT_declaration. |
| Fix typo in handling of DW_FORM_block4. |
| (read_full_die): Fix typo in handling of DW_FORM_block4. |
| (read_1_signed_byte, read_2_signed_bytes, read_4_signed_bytes): |
| New routines to get signed values from a buffer. |
| (read_n_bytes, read_string): Allocate storage from the temporary |
| obstack. If the host char size permits it, return pointer |
| to buffer instead of allocating storage. |
| (set_cu_language): Handle DW_LANG_Mips_Assembler. |
| (dwarf_attr): Return NULL if reference die for DW_AT_specification |
| or DW_AT_abstract_origin die is not found. |
| (record_minimal_symbol): Removed, replaced with a direct call to |
| prim_record_minimal_symbol, it now handles saving the string itself. |
| (convert_locdesc): Removed, partial symtab reading now uses |
| decode_locdesc. |
| (dwarf_attr): Use dwarf2_get_ref_die_offset to get the absolute |
| offset for the die reference. |
| (dwarf_decode_lines): Complain if the line section info is missing. |
| Use read_1_signed_byte to extract lh.line_base to avoid |
| problems with compilers whose plain char is represented by an |
| unsigned char. |
| Add cleanups for allocated temporary storage. |
| Start a subfile for the first file in the state machine. |
| Fix off by one problem with dirs.dirs access. |
| Use comp_dir when directory index is 0. |
| Support multiple sequences (from Jason Merrill <jason@cygnus.com>). |
| (dwarf2_start_subfile): Try to keep line numbers from identical |
| absolute and relative file names in a common subfile. |
| (new_symbol): Allocate symbol and symbol name on the symbol_obstack. |
| Set SYMBOL_LINE from DW_AT_decl_line if present. |
| Set SYMBOL_TYPE from passed type if not NULL. |
| Change DW_TAG_variable symbol types with missing type entries |
| to a sensible type. |
| Handle optimized_out, offreg and islocal storage classes. |
| Add external symbols with type information whose address isn't |
| known as LOC_UNRESOLVED symbols. |
| Synthesize typedefs for C++ classes, structs, unions and enumerations. |
| Handle DW_TAG_enumerator symbols, complain for unrecognized |
| symbol tags. |
| (die_type): A missing DW_AT_type represents a void type. |
| Use dwarf2_get_ref_die_offset to get the absolute offset for |
| the die reference. |
| (die_containing_type): New function to build type from |
| DW_AT_containing_type attribut. |
| (read_type_die): Handle DW_TAG_ptr_to_member_type. |
| Treat DW_TAG_subprogram like DW_TAG_subroutine_type. |
| (dwarf_base_type): Fix typo with creation of FT_UNSIGNED_SHORT |
| fundamental type. |
| (create_name): Removed, symbol name allocation is now done |
| in new_symbol. |
| (dump_die): Use print_address_numeric to print a CORE_ADDR. |
| (dwarf2_empty_die_ref_table): New function to clear the die |
| reference table. |
| (dwarf2_get_ref_die_offset): New function to get the absolute |
| die offset from a die reference attribute. |
| (decode_locdesc): Complete rewrite using a stack, code mostly |
| borrowed from dwarfread.c:locval. |
| (dwarf_alloc_type): Removed, replaced by direct calls to alloc_type. |
| (dwarf_alloc_block): Allocate block on temporary obstack. |
| |
| * elfread.c (elf_symtab_read): When handling Irix dynamic symbols, |
| skip section name symbols and relocate all others. |
| (elf_symfile_read): Build dwarf2 psymtab even if offset is non-zero. |
| |
| * irix5-nat.c (fetch_core_registers): Handle core_reg_sect |
| from N32 executables. Call registers_fetched after extracting |
| the registers. |
| (obj_list_variant, struct link_map, LM_OFFSET, LM_ADDR): New |
| definitions to enable support of O32 and N32 format objlists. |
| (struct so_list): New members offset, so_name and lmstart to |
| eliminate dependencies from the objlist format used. |
| (solib_map_sections, symbol_add_stub, solib_add, |
| info_sharedlibrary_command, solib_address, clear_solib): Use |
| so_name and LM_OFFSET. |
| (first_link_map_member): Rewrite to enable support of O32 and N32 |
| format objlists. |
| (next_link_map_member, xfer_link_map_member): New functions to |
| support O32 and N32 format objlists. |
| (find_solib): Use first_link_map_member, next_link_map_member and |
| xfer_link_map_member. |
| (solib_create_inferior_hook): Use TARGET_SIGNAL_* instead of |
| host signal numbers. |
| |
| * mdebugread.c (parse_partial_symbols, handle_psymbol_enumerators): |
| Pass CORE_ADDR variant to add_psymbol_to_list. |
| |
| * mips-tdep.c (heuristic_proc_desc): Stop examining the prologue |
| if we encounter a positive stack adjustment. Handle `move $30,$sp'. |
| Handle `sd reg,offset($sp)' for 32 bit ABIs. |
| |
| * symmisc.c (dump_msymbols, print_partial_symbols): Use |
| print_address_numeric to print a SYMBOL_VALUE_ADDRESS. |
| (dump_symtab): Print compilation directory if it is not NULL. |
| |
| * valops.c (search_struct_field, value_struct_elt_for_reference): |
| Use SYMBOL_VALUE_ADDRESS instead of SYMBOL_BLOCK_VALUE to get the |
| address of a static member. |
| |
| Thu Nov 28 00:46:24 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * vax-tdep.c (vax_print_insn): Made static, modified to take |
| disassemble_info as parameter. |
| (_initialize_vax_tdep): New function to initialize tm_print_insn |
| to vax_print_insn. |
| |
| Wed Nov 27 11:29:06 1996 Michael Snyder <msnyder@cleaver.cygnus.com> |
| |
| * blockframe.c: Remove old-style CALL_DUMMY code. |
| * h8300-tdep.c, config/h8300/tm-h8300.h: Ditto. |
| * m32r-tdep.c, config/m32r/tm-m32r.h: Ditto. |
| * sh-tdep.c, config/sh/tm-sh.h: Ditto. |
| * v850-tdep.c, config/v850/tm-v850.h: Ditto. |
| |
| Wed Nov 27 10:32:14 1996 Michael Snyder <msnyder@cleaver.cygnus.com> |
| |
| * breakpoint.c: DELETE command will not delete CALL_DUMMY breakpoint. |
| * blockframe.c: Add target-independant support for managing |
| CALL_DUMMY frames on the host side. |
| * frame.h: Declarations for generic CALL_DUMMY frame support. |
| * h8300-tdep.c: Add target function calls using generic frame support. |
| * config/h8300/tm-h8300.h: config for generic target function calls. |
| * m32r-tdep.c: Add target function calls using generic frame support. |
| * config/m32r/tm-m32r.h: config for generic target function calls. |
| * sh-tdep.c: Add target function calls using generic frame support. |
| * config/sh/tm-sh.h: config for generic target function calls. |
| * v850-tdep.c: Add target function calls using generic frame support. |
| * config/v850/tm-v850.h: config for generic target function calls. |
| * valops.c: ADD PUSH_RETURN_ADDRESS so that it doesn't have to be |
| done by PUSH_ARGUMENTS when there's no CALL_DUMMY. |
| |
| Tue Nov 26 19:21:35 1996 Mark Alexander <marka@cygnus.com> |
| |
| * config/mips/tm-mips.h (ADDR_BITS_REMOVE, TARGET_READ_SP): Define. |
| (mips_addr_bits_remove): Declare. |
| * mips-tdep.c (mips_push_dummy_frame): Fix heuristic-fence-post |
| errors when hitting breakpoints during inferior function calls |
| in 64-bit programs. |
| (fix_sign_extension): Make public, rename to mips_addr_bits_remove. |
| * utils.c (paddr_nz, preg_nz): New functions, similar to |
| paddr and preg but don't print leading zeroes. |
| * defs.h (paddr_nz, preg_nz): Declare. |
| * remote-mips.c: Use paddr_nz instead of paddr throughout |
| to reduce packet size. |
| (pmon_end_download): Improve timeout error handling. |
| |
| Tue Nov 26 17:21:37 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure: Rebuild with autoconf 2.12. |
| |
| Mon Nov 25 13:17:16 1996 Fred Fish <fnf@ninemoons.com> |
| |
| From: Paul Eggert <eggert@twinsun.com> |
| * remote-bug.c (wait_strings): Avoid creating a trigraph. |
| |
| Fri Nov 22 15:55:22 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * valops.c (value_at, value_fetch_lazy): Put in D10V call |
| to fix up address pointers. |
| * values.c (value_from_longest): Removed previous d10v changes. |
| * config/d10v/tm-d10v.h (TARGET_PTR_BIT): Change to 4 bytes. |
| |
| Fri Nov 22 10:06:19 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * config/i386/nm-i386v4.h (LOSING_POLL): Define, needed for |
| Unixware 1.1.2. |
| |
| Thu Nov 21 19:13:58 1996 Mark Alexander <marka@cygnus.com> |
| |
| * mips-tdep.c: Replace hard-coded constants with MIPS_INSTLEN. |
| (common_breakpoint): Use paddr instead of %x to print 64-bit values. |
| (heuristic_proc_desc): Add tests for 64-bit instructions. |
| (init_extra_frame_info, mips_push_arguments): Recognize additional |
| registers for EABI. |
| * remote-mips.c: Extend DDB target to allow TFTP downloads. |
| * config/mips/tm-mips.h (MIPS_LAST_ARG_REGNUM, MIPS_NUM_ARG_REGS): |
| Define. |
| |
| Wed Nov 20 19:09:16 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * infcmd.c (do_registers_info): Call val_print with the |
| virtual buf instead of the raw buf. Needed for REGISTER_CONVERT |
| to work with non-floating point regs. |
| |
| * d10v-tdep.c (d10v_skip_prologue): If we have line debugging |
| information, then the end of the prologue should the first |
| assembly instruction of the first source line. |
| |
| * values.c (value_from_longest): Put in D10V call to |
| fix up address pointers. |
| |
| * config/d10v/tm-d10v.h (REGISTER_VIRTUAL_SIZE): Modified. |
| (REGISTER_VIRTUAL_TYPE): Modified for PC_REGNUM and SP_REGNUM. |
| (REGISTER_CONVERTIBLE): Make PC and SP convertible. |
| (REGISTER_CONVERT_TO_VIRTUAL): Define. |
| (REGISTER_CONVERT_TO_RAW): Define. |
| (D10V_MAKE_DADDR): Define. |
| (D10V_MAKE_IADDR): Define. |
| |
| Wed Nov 20 16:15:15 1996 Geoffrey Noer <noer@cygnus.com> |
| |
| * config/i386/cygwin32.mh: add MMALLOC_CFLAGS = -I$(MMALLOC_SRC) |
| -DMMCHECK_FORCE=1 so memory checks are loaded for cygwin32 gdb |
| |
| Wed Nov 20 00:43:09 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * callback.h: Delete, moved to ../include. |
| * callback.c: Delete, moved to ../sim/common. |
| * Makefile.in (SFILES,COMMON_OBJS): Delete callback.[co]. |
| (callback.o): Delete rule. |
| * remote-sim.h: No longer include callback.h. |
| (sim_callback_write_stdout): Delete prototype. |
| * remote-sim.c (init_callbacks,end_callbacks): New functions. |
| (gdb_os_write_stdout, gdb_os_printf_filtered): New functions. |
| (gdb_callback, callbacks_initialized): New static globals. |
| (gdbsim_open): Call init_callbacks. |
| (gdbsim_close): Call end_callbacks. |
| (simulator_command): Call init_callbacks. |
| |
| * config/h8300/h8300.mt (SIM): Change to ../sim/h8300/libsim.a. |
| * config/h8500/h8500.mt (SIM): Change to ../sim/h8500/libsim.a. |
| |
| Mon Nov 18 15:58:05 1996 Jim Wilson <wilson@cygnus.com> |
| |
| * config/mips/tm-mips.h (FIX_CALL_DUMMY): Change unsigned LONGEST |
| to ULONGEST. |
| |
| Fri Nov 15 15:34:18 1996 Fred Fish <fnf@cygnus.com> |
| |
| From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE> |
| * procfs.c (wait_fd): Handle EINTR error return from poll |
| by restarting the poll. |
| * defs.h (PIDGET): Define a default version that just |
| returns its argument unchanged. |
| * inflow.c (terminal_init_inferior): Eliminate #ifdef |
| of PIDGET and fold both alternatives into common code. |
| (pass_signal): Use PIDGET for pid passed to kill(). |
| |
| Thu Nov 14 15:54:20 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * utils.c (paddr,preg): Use a static variable initialized to 32 |
| instead of doing addr>>32 to eliminate a warning produced by GCC |
| on 32-bit systems. |
| |
| * config/d10v/tm-d10v.h (ULONGEST): Define. |
| |
| Tue Nov 12 12:25:27 1996 Jim Wilson <wilson@cygnus.com> |
| |
| * c-typeprint.c (cp_type_print_method_args): Pass -1 for show in |
| recursive call to type_print. |
| |
| Tue Nov 12 12:18:29 1996 Jim Wilson <wilson@cygnus.com> |
| |
| * defs.h (ULONGEST): New macro. |
| * alpha-tdep.c, breakpoint.c, c-exp.y, ch-exp.c, convex-xdep.c, |
| corefile.c, defs.h, f-exp.y, findvar.c, gdbcore.h, m2-exp.y, |
| m88k-tdep.c, printcmd.c, remote-hms.c, remote-mips.c, sparc-tdep.c, |
| valarith.c, valops.c, values.c, config/gould/tm-np1.h, |
| config/mips/tm-mips.h, mswin/prebuilt/gdb/cexptab.c, |
| mswin/prebuilt/gdb/fexptab.c, mswin/prebuilt/gdb/m2exptab.c: |
| Change all occurances of unsigned LONGEST to ULONGEST. |
| |
| * configure.host (mips-sgi-irix6): Add. |
| |
| Tue Nov 12 12:16:40 1996 Michael Snyder <msnyder@cleaver.cygnus.com> |
| |
| * sh-tdep.c: Add functionality for target function calls. |
| * config/sh/tm-sh.h: Add support for target function calls. |
| |
| Tue Nov 12 12:06:58 1996 Michael Snyder <msnyder@cleaver.cygnus.com> |
| |
| * m32r-tdep.c: Add functionality for target function calls. |
| * valops.c: Small change to support target function calls. |
| * config/m32r/tm-m32r.h: Add support for target function calls. |
| |
| Mon Nov 11 17:15:59 1996 Geoffrey Noer <noer@cygnus.com> |
| |
| * defs.h: Modify Nov 11 12:59:00 change so _MSC_VER is checked |
| instead of _WIN32. |
| * win32-nat.c: Fix Nov 11 12:59:00 change (windows.h should |
| be included instead of windefs.h for compilers other than |
| VC++). |
| * mswin/windefs.h: Remove ^Ms and change C++ style comments |
| to C style comments. |
| |
| Mon Nov 11 14:32:38 1996 Mark Alexander <marka@cygnus.com> |
| |
| * utils.c (get_cell): Fix off-by-one bug. |
| * mips-tdep.c (get_frame_pointer, fix_sign_extension): |
| New functions to consolidate common code. |
| (mips_frame_chain, init_extra_frame_info): Use new functions |
| to fix problems with backtrace and finish commands on ddb board. |
| |
| Mon Nov 11 12:59:00 1996 Dawn Perchik <dawn@critters.cygnus.com> |
| |
| * mips-tdep.c, remote-mips.c, values.c, mdebugread.c, |
| config/mips/tm-mips.h: Add/fix bugs for 64-bit mips support. |
| * defs.h: Cleanup; add prototypes. |
| * corefile.c: Change FIXME #ifdef |
| * win32-nat.c: Include windefs instead of windows.h. |
| * utils.c: Add routines for printing addresses and registers |
| based on type size. |
| |
| Sat Nov 9 01:05:10 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * alpha-tdep.c (heuristic_proc_desc): Stop examining the prologue |
| if we encounter a positive stack adjustment. |
| (find_proc_desc): If heuristic_fence_post is non-zero, use |
| heuristic_proc_start to determine the start of a function before |
| calling heuristic_proc_desc. |
| |
| * coffread.c (coff_symtab_read): Change minimal symbol types |
| for C_LABEL symbols from mst_* to mst_file_*. |
| |
| * config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1. |
| |
| * configure.in: Handle error message from sun3 native ld when |
| configuring HLDFLAGS. |
| * configure: Regenerated with autoconf. |
| |
| * c-valprint.c (c_value_print): Adjust value address by VALUE_OFFSET. |
| * cp-valprint.c (cp_print_value): Prevent gdb crashes by making sure |
| that the virtual base pointer from an user object still points to |
| accessible memory. |
| |
| * dbxread.c (dbx_symfile_init): Initialize sym_stab_info to |
| clear the recently added header_files fields. |
| (dbx_symfile_finish): Free hfiles[i].vector to avoid storage leak. |
| |
| Fri Nov 8 14:30:23 1996 Michael Snyder <msnyder@cleaver.cygnus.com> |
| |
| * config/tm-sh.h: Added a missing comma in middle of |
| REGISTER_NAMES list. |
| |
| Fri Nov 8 12:29:51 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * monitor.c: Fix some formatting and comments. |
| |
| * remote-sim.c (simulator_command): Set up callbacks before |
| entering the simulator. |
| |
| Thu Nov 7 15:19:08 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-tdep.c: Fix some problems with inferior function calls. |
| * config/d10v/tm-d10v.h (EXTRA_FRAME_INFO): Change dummy to be |
| a pointer to the dummy's stack instead of just a flag. |
| |
| Tue Nov 5 10:21:02 1996 Michael Snyder <msnyder@cleaver.cygnus.com> |
| |
| * m32r-tdep.c: Improved frame_chain and fn prologue analysis. |
| * config/tm-m32r.h: Add framesize and register to extra_frame_info. |
| |
| Tue Nov 5 10:08:07 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * mswin/gdbwin.h: Remove bogus definition of CORE_ADDR. |
| * mswin/srcwin.cpp (CSrcScroll1::CSrcScroll1): Initialize depth |
| to fix divide-by-zero problem with clicking on source window. |
| |
| Mon Nov 4 00:48:37 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * mswin/recordit: Fix problem with absolute paths. |
| * mswin/recordit: Fix problem with relative paths. |
| |
| Sun Nov 3 18:06:42 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * mswin/{Makefile.in configure configure.in}: New files for |
| configuring wingdb under Unix. |
| |
| Sat Nov 2 03:54:13 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * irix5-nat.c, osfsolib.c, solib.c (symbol_add_stub): Handle |
| missing or zero-sized .text sections properly. |
| * mdebugread.c: Handle scRConst and scSUndefined storage classes. |
| * stabsread.c (scan_file_globals): Try to resolve symbols |
| for shared libraries from the minimal symbol table of the main |
| executable first. |
| |
| Fri Nov 1 13:59:28 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-tdep.c, config/d10v/tm-d10v.h: Major fixes to support |
| inferior function calls and proper stack backtracing on D10V-EVA |
| board. |
| |
| Fri Nov 1 10:50:51 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * config/powerpc/linux.mh (NATDEPFILES): Fix up things so that it |
| links. |
| (GDBSERVER_DEPFILES,TERMCAP): Ditto. |
| |
| * monitor.c (dev_name,targ_ops): Move static variables before |
| first use, to avoid compiler warnings. |
| |
| Thu Oct 31 16:37:17 1996 Michael Snyder <msnyder@cleaver.cygnus.com> |
| |
| * m32r-tdep.c: Improved frame_chain and fn prologue analysis. |
| * configure.tgt: Add entry for m32r target. |
| * monitor.h: Add a flag to tell monitor_store_register to use |
| (val, regno) instead of (regno, val). |
| * monitor.c: Make monitor_store_register honor the above flag. |
| Make monitor_exp ignore DC1/DC3 for m32r. |
| Increase buf size in monitor_dump_regs. |
| |
| Wed Oct 30 18:14:14 1996 Michael Snyder <msnyder@cleaver.cygnus.com> |
| |
| * m32r-tdep.c, m32r-rom.c: New files. |
| * config/m32r/m32r.mt: New file. |
| * config/m32r/tm-m32r.h: New file. |
| |
| Tue Oct 29 16:56:01 1996 Geoffrey Noer <noer@cygnus.com> |
| |
| * config/i386/xm-cygwin32.h: |
| * config/powerpc/xm-cygwin32.h: |
| add #define LSEEK_NOT_LINEAR so source lines aren't unexpectedly |
| truncated. |
| |
| Tue Oct 29 18:36:43 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * config/powerpc/tm-ppc-eabi.h (TARGET_BYTE_ORDER_SELECTABLE): |
| Define. |
| |
| Tue Oct 29 14:59:20 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * TODO: Add item suggesting an "info bfd" command. |
| |
| Tue Oct 29 12:48:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-tdep.c: Snapshot that supports D10V-EVA board. |
| |
| * config/d10v/tm-d10v.h (REGISTER_NAMES): Add imap0,imap1,dmap. |
| (TARGET_READ_FP,TARGET_WRITE_FP): Define. |
| |
| Mon Oct 28 17:34:24 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * mswin/genmakes mswin/recordit: New scripts to generate make |
| files for MSVC. |
| |
| Sun Oct 27 20:18:04 1996 Mark Alexander <marka@cygnus.com> |
| |
| * config/mips/{tm-vr5000.h,tm-vr5000el.h,vr5000.mt,vr5000el.mt}: |
| New files. |
| * configure.tgt: Modify cases for vr5000 to use new files. |
| |
| Sat Oct 26 07:15:14 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * config/alpha/alpha-osf3.mh (XM_CLIBS): Add -lm for OSF/1-4.0. |
| |
| * procfs.c (proc_set_exec_trap): Under Alpha OSF/1-4.0, tracing |
| the entry to the exit system call to detect termination of the |
| inferior stopped working. Trace termination of the inferior via |
| PRFS_STOPTERM instead. |
| (procfs_init_inferior): Do not trace entry to exit system call |
| if PIOCSSPCACT is defined. |
| (procfs_wait): Handle PR_DEAD event, which signals the termination |
| of the inferior if PRFS_STOPTERM is set. |
| |
| * mdebugread.c (parse_partial_symbols): Ignore stNil section |
| start address symbols. |
| |
| * sparc-tdep.c (get_saved_register): Get saved PC from the |
| frame info if not in innermost frame. |
| |
| Thu Oct 24 10:51:45 1996 Mark Alexander <marka@cygnus.com> |
| |
| * dbxread.c (process_one_symbol): Interpret end-of-function |
| markers correctly; this fixes problem on Vr5000 where all |
| functions in a module had the same address. |
| * configure.in, configure.tgt, configure.host, gdbserver/configure.in: |
| Correct for pc-linux-gnu problem in config.guess. |
| * configure: Regenerate. |
| |
| Thu Oct 24 10:06:58 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * dbxread.c: Don't swap symbols in place, since internal and |
| external forms may have different sizes. Don't assume that an |
| internal_nlist has the same layout as an external_nlist. Create |
| symbol for n_strx element so to hide specifics of nlist from |
| partial-stab.h. |
| * partial-stab.h: Don't reference dbxread symbols directly. Use |
| CUR_SYMBOL_STRX instead. |
| * config/i386/xm-windows.h: Define SIGQUIT and SIGTRAP. |
| |
| * config/v850/tm-v850.h: Define PS_REGNUM and TARGET_V850 for |
| MSVC builds. |
| * mswin/gdbwin.c (reg_order): Define register order for V850. |
| * mswin/gui.cpp (CGuiApp::InitInstance): Define target name for |
| V850. |
| * mswin/regdoc.h: Define MAXREGS for V850. |
| |
| Tue Oct 22 16:28:20 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * v850-tdep.c (scan_prologue): Changes to deal with scheduled |
| prologues correctly. First, prologue end is now defined by |
| presence of a branch, jump or call insn. Second, can no longer |
| fix frame offsets because we may not know the offset until after a |
| register has been saved. |
| * (v850_init_extra_frame_info): Fixup frame offsets here because |
| we have all the info at this time. |
| * (v850_frame_chain): Use new calling convention for scan_prologue. |
| |
| Tue Oct 22 10:25:29 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-tdep.c, config/d10v/tm-d10v.h: Changes to allow stack |
| backtraces and inferior function calls. |
| |
| Tue Oct 22 10:32:46 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * mpw-make.sed: Update init.c editing to work with Oct 8 change. |
| (@HLDFLAGS@): Always edit out. |
| |
| Mon Oct 21 18:17:08 1996 Mark Alexander <marka@cygnus.com> |
| |
| * mdebugread.c (parse_partial_symbols): Fix 64-bit |
| sign-extension problems in calculating psymtab addresses. |
| * buildsym.c (end_symtab): Use macro to pop context. |
| |
| Mon Oct 21 14:40:50 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * v850-tdep.c: Cleanup lots of things. Add many comments. |
| |
| * v850-tdep.c (v850_init_extra_frame_info v850_frame_chain): Fix |
| sign bugs with scanning prologues. Get a little smarter about |
| calculating the length of uninteresting instructions. |
| |
| Mon Oct 21 14:01:38 1996 Michael Snyder <msnyder@cleaver.cygnus.com> |
| |
| * top.c: Add new commands "set annotate" and "show annotate". |
| |
| Sun Oct 20 04:38:39 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * corelow.c (core_close): Clear inferior_pid only if there is |
| an open core_bfd. |
| |
| * cp-valprint.c (cp_print_value_fields): Pass correct address |
| to val_print, not 0. |
| |
| From Andreas Schwab (schwab@issan.informatik.uni-dortmund.de): |
| * eval.c (evaluate_subexp_standard) [case BINOP_REPEAT]: Chase |
| typedefs before checking for integral type of right operand. |
| |
| Fri Oct 18 17:26:22 1996 Mark Alexander <marka@cygnus.com> |
| |
| * mdebugread.c (parse_symbol): Fix crash when malloc has |
| no type info and void type has no associated pointer type. |
| |
| Thu Oct 17 18:18:20 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * configure.host: New file, host configuration mapping. |
| * configure.tgt: New file, target configuration mapping. |
| * configure.in: Remove host and target mapping. |
| * configure: Rebuild. |
| |
| Wed Oct 16 17:46:03 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * breakpoint.c (must_shift_inst_regs): New global. |
| (bpstat_stop_status): Change #if uses of DECR_PC_AFTER_BREAK into |
| equivalent expression uses. |
| * infrun.c (wait_for_inferior): Ditto. |
| |
| Wed Oct 16 01:53:43 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * v850-tdep.c (v850_push_arguments): Use symbolic names for arg |
| registers. |
| * config/v850/tm-v850.h: Change FP to 29. Define arg regs. |
| |
| Tue Oct 15 16:30:07 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * Makefile.in (init.c): Don't use -s option with grep. It means |
| something different under Digital Unix. |
| |
| * buildsym.c (finish_block): Treat LOC_BASEREG_ARG and |
| LOC_LOCAL_ARG as arguments so that GDB will know about function |
| args declared this way. Mostly affects dwarf. |
| * dwarfread.c (decode_die_type): Change default type from int to |
| void. This allows GDB to recognize void functions. |
| * (new_symbol): If AT_PROTOTYPED is present, set a flag in the |
| type structure. |
| * findvar.c (extract_floating store_floating): Clean up comments |
| to reflect reality. |
| * gdbtypes.h: Add TYPE_FLAG_PROTOTYPED so that we can tell if a |
| function has a prototype. Currently, only dwarf supports this. |
| * utils.c (floatformat_from_doublest): Fix logic error with |
| converting from double to float. (It wasn't shifting mant_long if |
| it had a hidden bit.) |
| * v850-tdep.c: Add support for function calling. Fix some |
| problems with debugging code w/o debug symbols. |
| * config/v850/tm-v850.h: Ditto. |
| |
| Tue Oct 15 18:19:42 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * utils.c: Always ensure that size_t is defined. Check |
| HAVE_STDDEF_H rather than __STDC__ |
| (xmalloc, xrealloc): Use size_t rather than long. |
| |
| Tue Oct 15 14:24:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * config/powerpc/tm-ppc-eabi.h: Undefine NO_SINGLE_STEP so targets |
| can use single-step commands. |
| |
| Sun Oct 13 11:38:25 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * stabsread.c (define_symbol): If REG_STRUCT_HAS_ADDR is non-zero, |
| follow typedefs before checking TYPE_CODE for structures and unions. |
| |
| Fri Oct 11 15:43:54 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * frame.h: Move definition of struct frame_saved_regs to before |
| struct frame to make it possible to use frame_saved_regs in |
| EXTRA_FRAME_INFO macro. |
| |
| * v850-tdep.c config/v850/tm-v850.h: Lotsa new functions and |
| macros to make frame operations (such as backtrace) work. |
| |
| Fri Oct 11 14:23:50 1996 Fred Fish <fnf@cygnus.com> |
| |
| * dbxread.c (process_one_symbol): Check for null string directly |
| rather than using strcmp against "". |
| * partial-stab.h: Ditto. |
| |
| Fri Oct 11 12:18:32 1996 Mark Alexander <marka@cygnus.com> |
| |
| * gdbserver/{gdbreplay.c,low-linux.c,remote-utils.c,utils.c}: |
| Make it compile on Linux and eliminate some warnings. |
| |
| Thu Oct 10 16:32:08 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * Makefile.in (init.c): Fixup final sed script to work around |
| Linux bug with `p' operator. |
| |
| Wed Oct 9 18:02:48 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * remote-mips.c: Use the correct name everywhere (DDB) for NEC's |
| VR4300 target. |
| (ddb_ops, pmon_ops): Fix the documentation strings. |
| |
| Wed Oct 9 07:42:44 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * Makefile.in (init.c): Retro HPUX grep lacks -h option. Strip |
| filenames with sed instead. |
| |
| Tue Oct 8 15:59:44 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * defs.h: Remove decls of xmalloc and xrealloc. There is a |
| conflicting definition in libiberty.h. |
| |
| Tue Oct 8 11:47:13 1996 Fred Fish <fnf@cygnus.com> |
| |
| * dbxread.c (dbx_symfile_read): Call free_pending_blocks rather |
| than poking global variable (which is now static). |
| * hpread.c (hpread_build_psymtabs): Ditto. |
| * os9kread.c (os9k_symfile_read): Ditto. |
| * xcoffread.c (xcoff_initial_scan): Ditto. |
| |
| * buildsym.h (free_pending_blocks): Declare here. |
| (pending_blocks): Remove declaration of global symbol. |
| (free_pendings): Remove declaration of global symbol. |
| (make_blockvector): Declare here. |
| (record_pending_block): Declare here. |
| |
| * dstread.c (make_blockvector): Remove static copy that was old |
| clone of version in buildsym.c. |
| (process_dst_block): Call record_pending_block rather than doing |
| it by hand. |
| (read_dst_symtab): Ditto. |
| |
| * buildsym.c (make_blockvector): Make global rather than static, |
| (record_pending_block): New function, code moved from finish_block. |
| (finish_block): Use record_pending_block. |
| (free_pending_blocks): New function. |
| (really_free_pendings): Call free_pending_blocks. |
| (pending_blocks): Make static instead of global. |
| (free_pendings): Make static instead of global. |
| |
| Tue Oct 8 09:03:22 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * config/i386/windows.mh config/i386/xm-windows.h:: New config |
| files to support building Wingdb (built under Microsoft build |
| environment). |
| |
| * Makefile.in: Add rule for hpux-thread.o (needs special header |
| files). |
| * (SUBDIRS): Remove mswin. |
| * Change procedure for creating init.c. Speeds things up quite a |
| bit. |
| * config.in configure configure.in: Check for select, poll. |
| * Check for OSF header files before including hpux-thread.o. |
| * Don't configure doc or testsuite when building under MSVC. |
| * findvar.c value.h (read_register_pid write_register_pid): Make |
| global. Needed for hppa-tdep.c. |
| * (supply_register): Don't set pid to inferior_pid when supplying |
| registers. |
| * hppa-tdep.c (saved_pc_after_call): frame_saved_pc -> |
| FRAME_SAVED_PC. |
| * (frame_saved_pc): Change name to hppa_frame_saved_pc. |
| * (hppa_pop_frame): Don't use a pid of 0 with target_write_pc. |
| Use write_pc instead, which uses the correct pid. |
| * (target_read_pc target_write_pc): Use read/write_register_pid |
| instead of read/write_register to preserve the pid passed in. |
| * inftarg.c (child_can_run): Add flag child_suppress_run to allow |
| hpux-threads.c to override this as a runnable target. |
| * config/pa/nm-hppah.h: Define target_new_objfile and |
| target_pid_to_str. |
| * config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc |
| instead of frame_saved_pc. |
| * config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb. |
| * config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since |
| we can't easily determine the start file bounds with ELF. |
| * config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb. |
| * hpux-thread.c: New file for HPUX/OSF thread support. |
| * osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h |
| RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h |
| cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h |
| cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h |
| cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF |
| thread support. |
| |
| Sun Oct 6 15:48:09 1996 Fred Fish <fnf@cygnus.com> |
| |
| * buildsym.c (finish_block): Change innerblock_anon_complaint to |
| print the addresses as part of the complaint. Add a complaint for |
| cases where the block end address is smaller than the block start |
| address, in case any such conditions slip through our fixup mechanism. |
| * symmisc.c (dump_symtab): Only print blockvector for primary |
| symtabs, to avoid massive duplication of output due to secondary |
| symtabs that point to same blockvector. Also do some minor |
| formatting tweaks. |
| |
| Mon Oct 7 10:42:32 1996 Per Bothner <bothner@deneb.cygnus.com> |
| |
| Replace header_files global by per-objfile field. |
| * gdb-stabs.h (struct dbx_symfile_info): Add fields header_files, |
| n_header_files, n_allocated_header_files. |
| * stabsread.h (header_files, n_header_files, n_allocated_header_files): |
| Replace externs by macros HEADER_FILES, N_HEADER_FILES, and |
| N_ALLOCATED_HEADER_FILES. |
| * dbxread.c (dbx_symfile_finish): Free HEADER_FILES. |
| (free_header_files, init_header-files): Don't free/init headerfiles. |
| (various functions): Use macros instead of header_files globals. |
| * stabsread.c (various functions): Likewise. |
| |
| Sun Oct 6 22:43:06 1996 Jason Merrill <jason@yorick.cygnus.com> |
| |
| * dwarf2read.c (read_tag_reference_type): New fn. |
| (read_type_die): Call it. |
| (dwarf_attr): Also look in the DIEs referred to by specification |
| or abstract_origin attributes. |
| |
| Wed Oct 2 22:07:16 1996 Fred Fish <fnf@cygnus.com> |
| |
| * inferior.h (IN_SIGTRAMP): Pass pc to SIGTRAMP_START and |
| SIGTRAMP_END. |
| * config/i386/tm-i386os9k.h (SIGTRAMP_START, SIGTRAMP_END): |
| Define with dummy pc arg. |
| * config/m68k/tm-nbsd.h: Ditto. |
| * doc/gdbint.texinfo: Document that SIGTRAMP_START and |
| SIGTRAMP_END are macros that take an single argument. |
| |
| Mon Sep 30 20:02:45 1996 Fred Fish <fnf@cygnus.com> |
| |
| * defs.h: Remove define of PRIVATE_XMALLOC. |
| |
| Mon Sep 30 15:39:28 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * config/v850/tm-v850.h: Use distinct register for PC, not EIPC. |
| |
| Mon Sep 30 11:16:34 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * top.c (execute_control_command): Free values from while_control |
| and if_control conditions after evaluation to avoid storage leaks. |
| From Peter Schauer. |
| |
| Fri Sep 27 17:43:06 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * configure configure.in: Recognize v850 target. |
| * v850-tdep.c: New file, NEC V850 target support. |
| * config/v850/{v850.mt tm-v850.h}: New files for NEC V850 support. |
| |
| Fri Sep 27 14:48:15 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * infrun.c (wait_for_inferior): Update current_line and |
| current_symtab when stepping continues in the middle of a new line. |
| |
| Fri Sep 27 10:25:30 1996 Fred Fish <fnf@cygnus.com> |
| |
| * top.c (print_gdb_version): Rewrote to comply with new GNU coding |
| standards for the --version option. |
| (print_gnu_advertisement): Remove, now part of print_gdb_version. |
| (show_version): Remove call to print_gnu_advertisement. |
| * top.h (print_gnu_advertisement): Remove prototype. |
| * main.c (print_gdb_help): Move help to static function and |
| add prototype. |
| (main): Call print_gdb_help rather than inlining it. |
| (main): Remove call to print_gnu_advertisement. |
| |
| Fri Sep 27 13:32:53 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * config/d10v/tm-d10v.h (TARGET_{INT,PTR}_BIT): Define. |
| (TARGET_{,LONG_}DOUBLE_BIT): Ditto. |
| |
| Thu Sep 26 23:10:26 1996 Mark Alexander <marka@cygnus.com> |
| |
| * configure.in, config/i386/tm-linux.h: Fix configure |
| problem on older Linux systems that prevented core files |
| from being recognized. |
| |
| Wed Sep 25 18:31:33 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * dbug-rom.c: New file, support for Motorola's dBUG monitor. |
| * config/m68k/monitor.mt (TDEPFILES): Add it. |
| * NEWS: Mention it. |
| |
| Mon Sep 23 16:13:50 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * config/d10v/tm-d10v.h (SAVED_PC_AFTER_CALL): Fixed. |
| Now single-steps correctly. |
| * d10v-tdep.c (d10v_pop_frame): Fixed. |
| |
| Fri Sep 20 16:10:58 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * config/sh/tm-sh.h (REGISTER_NAMES): Move fp registers to |
| be consistent with GCC. |
| (FPUL_REGNUM, etc): Renumber to match list changes. |
| (ADDR_BITS_REMOVE): Delete. |
| * sh-tdep.c (sh_reg_names, sh3_reg_names, sh3e_reg_names): |
| Rearrange to match REGISTER_NAMES. |
| * sh3-rom.c (sh3_regnames, sh3e_regnames): Ditto. |
| |
| Thu Sep 19 16:19:01 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-tdep.c: Stack chain should work now. |
| |
| Tue Sep 17 18:46:57 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-tdep.c, config/d10v/tm-d10v.h: Snapshot. |
| |
| Tue Sep 17 12:20:50 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Add cases for MIPS 5000 like MIPS 4300. |
| * configure: Rebuild. |
| |
| Tue Sep 17 12:09:00 1996 Dawn Perchik <dawn@critters.cygnus.com> |
| |
| * ser-e7kpc.c: Added wingdb support for target e7000pc. |
| |
| Tue Sep 17 10:56:52 1996 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * remote-mips.c (pmon_wait): DDB PMON does not require forced |
| re-entry back into debug mode. |
| |
| Mon Sep 16 14:32:58 1996 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * remote-mips.c (mips_load): Ensure that the PC is explicitly |
| loaded after a load to a DDB PMON system. |
| |
| Fri Sep 13 12:02:39 1996 Fred Fish <fnf@cygnus.com> |
| |
| * Makefile.in (INTERNAL_LDFLAGS): Add @HLDFLAGS@ to list. |
| (HLDENV): Set to @HLDENV@. |
| (gdb): Prefix link command line with $(HLDENV). |
| * configure.in: Add support to test for --enable-shared and |
| generate appropriate values for HLDFLAGS and HLDENV. |
| * configure: Regenerated with autoconf. |
| |
| Sun Sep 8 15:26:27 1996 Fred Fish <fnf@cygnus.com> |
| |
| * alpha-nat.c (fetch_core_registers): Match Sep 4 gdbcore.h prototype |
| change for core_read_registers in struct core_fns. |
| * core-regset.c (fetch_core_registers): Ditto & add prototype. |
| * core-sol2.c (fetch_core_registers): Ditto & add prototype. |
| * i386aix-nat.c (fetch_core_registers): Ditto & add prototype. |
| * i386b-nat.c (fetch_core_registers): Ditto. |
| * i386mach-nat.c (fetch_core_registers): Ditto & add prototype. |
| * irix4-nat.c (fetch_core_registers): Ditto. |
| * irix5-nat.c (fetch_core_registers): Ditto. |
| * lynx-nat.c (fetch_core_registers): Ditto & add prototype. |
| * m68knbsd-nat.c (fetch_core_registers): Ditto. |
| * mips-nat.c (fetch_core_registers): Ditto & add prototype. |
| * rs6000-nat.c (fetch_core_registers): Ditto. |
| * sparc-nat.c (fetch_core_registers): Ditto. |
| * sun3-nat.c (fetch_core_registers): Ditto & add prototype. |
| * ultra3-nat.c (fetch_core_registers): Ditto & add prototype. |
| |
| * alpha-nat.c (register_addr): Match Sep 4 gdbcore.h prototype change. |
| * delta68-nat.c (register_addr): Ditto. |
| * gdbserver/low-linux.c (register_addr): Ditto. |
| * gdbserver/low-hppabsd.c (register_addr): Ditto. |
| * i386m3-nat.c (register_addr): Ditto. |
| * mips-nat.c (register_addr): Ditto. |
| * ultra3-nat.c (register_addr): Ditto. |
| |
| Sun Sep 8 15:14:00 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * blockframe.c (inside_main_func): Cleanup slightly. Move |
| mainsym def into the block it's used in. |
| * configure.in configure: Allow NATDEPFILES to be recognized in |
| .mh files regardless of whitespace. |
| |
| * cpu32bug-rom.c (cpu32bug_cmds): Change load_response string to |
| keep downloads from hanging. |
| |
| * remote-wiggler.c: Add support for flash upgrades. |
| * (wiggler_error): Fix message format. Add new error code. |
| * (wiggler_write_byets): Error code is hex. Report errors with |
| proper routine name. |
| * (wiggler_read_byets): Report errors with proper routine name. |
| * (get_packet): Add support for new flash commands. |
| * (wiggler_load): Call clear_symtab_users() to reset things |
| properly after download. |
| * (flash_xfer_memory bdm_update_flash_command): New funxtions to |
| support flash upgrades for Wiggler. |
| * (_initialize_remote_wiggler): Add `bdm update-flash' command. |
| |
| Fri Sep 6 13:14:13 1996 Geoffrey Noer <noer@cygnus.com> |
| |
| * ser-tcp.c: don't include netinet/tcp.h if __CYGWIN32__ |
| |
| Thu Sep 5 17:05:13 1996 Geoffrey Noer <noer@cygnus.com> |
| |
| * config/i386/cygwin32.mh: |
| * config/powerpc/cygwin32.mh: build ser-tcp.o for both hosts |
| |
| Thu Sep 5 12:09:13 1996 Per Bothner <bothner@deneb.cygnus.com> |
| |
| * value.h (COERCE_REF): Fix previous change. |
| (COERCE_ENUM): Add a check_typedef (this is the real fix). |
| |
| Thu Sep 5 03:28:30 1996 Wilfried Moser <moser@rtl.cygnus.com> |
| |
| * eval.c (evaluate_subexp_standard): In case of OP_ARRAY: make a |
| better check of array boundaries. |
| |
| Thu Sep 5 01:29:42 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * configure: Update aclocal.m4 and re-run autoconf to get correct |
| defs for BFD stuff. |
| * remote-wiggler.c (wiggler_error): Error codes are hex. Also, |
| fix default message generation. |
| |
| Wed Sep 4 17:28:40 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * Makefile.in: Add mswin to SUBDIRS. Add rules for |
| mswin/libwingdb.a and remote-wiggler.o. |
| * breakpoint.c (breakpoint_here_p): Clean up bp enabled test. |
| * (breakpoint_inserted_here_p): New func, just like |
| breakpoint_here_p, except it's honest. Honestly. |
| * breakpoint.h: Proto for above. |
| * configure configure.in: Add mswin to configdirs if host is |
| i[3456]86-*-windows. |
| * core-aout.c (fetch_core_registers register_addr) gdbcore.h: |
| Change all vars that can contain addresses to type CORE_ADDR. |
| * findvar.c (supply_register): Allow val to be NULL. This means |
| that regno is unsupported. |
| * (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms |
| just call pid forms with inferior_pid so that there's only once |
| place to hack PC's and such. |
| * infrun.c (proceed): Don't skip breakpoints if user changed PC. |
| * remote-wiggler.c: New file. Support for BDM interface from |
| Macraigor Systems. |
| * serial.c: Enhance serial logging capability. Add hex and octal |
| output modes (set remotelogbase {hex|octal|ascii}. Also log |
| breaks, timeouts, errors, and eofs. |
| * serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper |
| function so that we can log breaks. Don't export serial_logfile |
| or serial_logfp. |
| * top.c (execute_command): Don't test for serial_logfp here. |
| Just call serial_log_comand, and let serial.c sort it out. |
| * valops.c (value_of_variable): Don't attempt to establish frames |
| for static and global variables. This makes things work a bit |
| better if the stack or frame pointer is trashed. |
| * config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o. |
| * config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack |
| misaligned stacks during function calls. |
| |
| Wed Sep 4 13:06:26 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * terminal.h: Don't use #elif. |
| |
| Wed Sep 4 06:49:35 1996 Wilfried Moser <moser@rtl.cygnus.com> |
| |
| * ch-exp.c (parse_tuple_element): Allow (*): for array tuples |
| if we have a type. |
| |
| * eval.c (evaluate_subexp_standard): In case of OP_ARRAY: |
| check number of args against bounds of array to avoid |
| memory corruption. |
| |
| * value.h (COERCE_REF): Do a CHECK_TYPEDEF in case we get |
| a TYPE_CODE_TYPEDEF. |
| |
| Fri Aug 30 15:07:14 1996 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * remote-mips.c: Provide support for DDBVR4300 target board. |
| (ddb_open, ddb_ops): Added. |
| (mips_monitor_type): MON_DDB Added. |
| (mips_enter_debug, mips_exit_debug, mips_initialize, |
| mips_fetch_registers, common_breakpoint, mips_load, |
| _initialize_remote_mips): Updated. |
| |
| Thu Aug 29 17:00:18 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * nlm/configure.in (i[345]86-*-*): Recognize i686 for pentium pro. |
| * nlm/configure: Regenerate. |
| |
| * gdbserver/configure.in (i[345]86-*-*): Recognize i686 for |
| pentium pro. |
| |
| Wed Aug 28 13:11:15 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: If CY_AC_PATH_TCLCONFIG can't find TCL, don't run |
| CY_AC_LOAD_TCLCONFIG. |
| * configure: Rebuild. |
| |
| Tue Aug 27 12:40:40 1996 Fred Fish <fnf@cygnus.com> |
| |
| * infrun.c (wait_for_inferior): Initialize stop_func_end before calling |
| find_pc_partial_function. |
| |
| Tue Aug 27 10:17:34 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * configure: Regenerate again. |
| |
| Tue Aug 27 04:25:08 1996 Geoffrey Noer <noer@cygnus.com> |
| |
| * configure.in: work around host_alias configure bug. |
| AC_CANONICAL_HOST is called twice (first by AC_CHECK_TOOL |
| and second by AC_CANONICAL_SYSTEM). The second clobbers the |
| previous setting. Circumventing by moving the second check |
| to before the first. |
| * configure: regenerated |
| |
| Mon Aug 26 18:36:54 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * config/d10v/d10v.mt: New file. |
| * config/d10v/tm-d10v.h: New file. |
| * configure.in: New target D10V. |
| * d10v-tdep.c: New file. |
| |
| Sun Aug 25 00:09:47 1996 Fred Fish <fnf@rtl.cygnus.com> |
| |
| * rs6000-tdep.c: Fix typo in comment. |
| * valops.c (call_function_by_hand): Set using_gcc to 2 |
| for code compiled without -g, per comment in code. |
| * config/a29k/tm-a29k.h (STACK_ALIGN): Add comment. |
| * config/sparc/tm-sparc.h (STACK_ALIGN): Add comment. |
| * config/sparc/tm-sp64.h (STACK_ALIGN): Add comment. |
| * config/pyr/tm-pyr.h (STACK_ALIGN): Add comment. |
| * config/m88k/tm-m88k.h (STACK_ALIGN): Add comment. |
| * config/pa/tm-hppa.h (PUSH_ARGUMENTS): Enclose args in ()'s. |
| (STACK_ALIGN): Add comment, move to be with other associated |
| macros, and document. |
| * config/mips/tm-mips.h (PUSH_ARGUMENTS): Enclose args in ()'s. |
| (STACK_ALIGN): Remove completely, handled by PUSH_ARGUMENTS. |
| * config/alpha/tm-alpha.h (PUSH_ARGUMENTS): Enclose args in ()'s. |
| * config/rs6000/tm-rs6000.h (STACK_ALIGN): Remove completely, |
| handled by PUSH_ARGUMENTS. |
| (PUSH_ARGUMENTS): Enclose args in ()'s. |
| |
| Fri Aug 23 13:55:05 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * infrun.c (wait_for_inferior): Try to reenable shared library |
| breakpoints even if auto_solib_load is not set. |
| |
| Wed Aug 21 16:31:27 1996 Fred Fish <fnf@cygnus.com> |
| |
| * valprint.c (print_longest): Test for CC_HAS_LONG_LONG as well as |
| PRINTF_HAS_LONG_LONG. |
| * expprint.c (dump_expression): Ditto. |
| * configure.in: Fix check for long long support in compiler to |
| use a function body, not a nested function. |
| * configure: Rebuild with autoconf. |
| |
| Tue Aug 20 17:59:42 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * aclocal.m4: Include ../bfd/aclocal.m4. |
| * configure.in: Add stdlib.h to AC_CHECK_HEADERS. Call |
| BFD_NEED_DECLARATION on malloc, realloc, and free. |
| * acconfig.h: Add NEED_DECLARATION_MALLOC, |
| NEED_DECLARATION_REALLOC, and NEED_DECLARATION_FREE. |
| * configure, config.in: Rebuild. |
| * defs.h: Include <stddef.h> and <stdlib.h> based on HAVE_*_H |
| rather than __STDC__. Only declare malloc, realloc, and free if |
| NEED_DECLARATION_* is defined. |
| |
| Tue Aug 20 15:37:03 1996 Fred Fish <fnf@cygnus.com> |
| |
| * solib.c (_initialize_solib): Add missing '\' chars at ends of |
| strings that continue on next line. |
| (enable_break): Replace "return 0" with setting success to zero |
| and letting normal return handle the return. |
| |
| Sat Aug 17 14:16:23 1996 Fred Fish <fnf@cygnus.com> |
| |
| * mips-tdep.c (mips_push_arguments): Make sure sp and struct_addr |
| are properly aligned. |
| |
| Fri Aug 16 17:54:26 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * rs6000-tdep.c (rs6000_fix_call_dummy): Add full set of arguments. |
| * config/rs6000/tm-rs6000.h (FIX_CALL_DUMMY): Pass all arguments |
| to function, declare function correctly. |
| |
| Fri Aug 16 17:24:35 1996 Dawn Perchik <dawn@critters.cygnus.com> |
| |
| * symtab.h: changed namespace to _namespace for compiling under |
| MFC v4.0. |
| |
| Fri Aug 16 13:52:21 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * mpw-make.sed: Update for various recent changes, add some |
| comments. |
| |
| Fri Aug 16 15:47:36 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * config/rs6000/tm-rs6000.h (FIX_CALL_DUMMY): Cast args to be an |
| integer for type correctness. |
| |
| Fri Aug 16 15:15:37 1996 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * config/mips/{vr4300.mt, vr4300el.mt} (SIM): Add -lm when |
| simulator is included. |
| |
| Thu Aug 15 13:44:13 1996 Fred Fish <fnf@cygnus.com> |
| |
| * findvar.c (write_register_pid): Only needed when TARGET_WRITE_PC |
| is not defined. |
| (read_register_pid): Only needed when TARGET_READ_PC is not |
| defined. |
| * hppa-tdep.c (frame_saved_pc): Remove prototype. |
| * infptrace.c (udot_info): Prototype when CHILD_XFER_MEMORY is |
| not defined. |
| * config/xm-aix4.h (aix_resizewindow): Convert old style decl |
| to prototype. |
| * xcoffsolib.c (command.h): Include for needed prototypes. |
| |
| Wed Aug 14 17:54:19 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * config/i386/cygwin32.mh: Set NAT_FILE to nm-empty.h to make |
| native work. |
| |
| Wed Aug 14 02:03:42 1996 Fred Fish <fnf@cygnus.com> |
| |
| From Blair MacIntyre <bm@cs.columbia.edu>: |
| * hppa-tdep.c (hppa_fix_call_dummy): Use MSYMBOL_TYPE rather |
| than SYMBOL_TYPE on msymbols. |
| * somsolib.c (som_solib_create_inferior_hook): Ditto. |
| |
| * Makefile.in (init.c): Generate with prototypes. |
| |
| * config/pa/tm-hppa.h (frame_saved_pc): Add prototype. |
| * config/rs6000/xm-rs6000.h (aix_resizewindow): Ditto. |
| * config/rs6000/tm-rs6000.h (frame_initial_stack_address): Ditto. |
| (pc_load_segment_name): Ditto. |
| (pop_frame): Ditto. |
| (extract_return_value): Ditto. |
| (is_magic_function_pointer): Ditto. |
| (push_dummy_frame): Ditto. |
| (fix_call_dummy): Ditto. |
| (push_arguments): Ditto. |
| (skip_trampoline_code): Ditto. |
| (aix_process_linenos): Ditto. |
| |
| * config/m68k/tm-cisco.h (get_longjmp_target): Add prototype. |
| * config/m68k/tm-es1800.h: Ditto. |
| * config/m68k/tm-vx68.h: Ditto. |
| * config/m68k/tm-sun3.h: Ditto. |
| * config/m68k/tm-m68kv4.h: Ditto. |
| |
| Tue Aug 13 23:04:36 1996 Fred Fish <fnf@cygnus.com> |
| |
| * config/mips/nm-mips.h (get_longjmp_target): Add prototype. |
| * config/mips/nm-irix3.h (get_longjmp_target): Add prototype. |
| * remote-mips.c (mips_read_processor_type): Remove prototype. |
| * mips-tdep.c (gdb_print_insn_mips): Add prototype and make static. |
| * irix5-nat.c (fetch_core_registers): Add prototype. |
| |
| Mon Aug 12 21:23:44 1996 Fred Fish <fnf@cygnus.com> |
| |
| * remote-pa.c (boot_board): Add dummy params to make type compatible |
| for passing to add_com. |
| * scm-exp.c (scm_lreadr): Ensure svalue is not used uninitialized. |
| * buildsym.c (compare_line_numbers): Change function to match |
| prototype and also what qsort expects. |
| |
| Mon Aug 12 19:19:00 1996 Mark Alexander <marka@cygnus.com> |
| |
| * remote.c: Make remote_write_size public. |
| * sh-tdep.c (_initialize_sh_tdep): Set remote_write_size to 300 |
| to prevent packet errors with some versions of CMON. |
| |
| Mon Aug 12 16:20:58 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * defs.h: Define CONST_PTR as blank if compiling with Microsoft |
| C, else it's `const'. |
| * c-lang.c c-lang.h ch-lang.c f-lang.c language.c m2-lang.c |
| scm-lang.c: Microsoft C can't hack const pointers. Use CONST_PTR |
| macro instead. |
| * configure configure.in defs.h: Use AC_C_CONST to figure out if |
| the compiler supports const. Gets rid of some cruft in defs.h. |
| * dwarf2read.c: <string.h> -> "gdb_string.h" |
| * remote-sim.c: Add prototypes. Fix call to gdbsim_kill. |
| * sparcl-tdep.c (download): Add prototypes to write_routine and |
| start_routine args. |
| |
| * mswin/gdbwin.c: Don't include both varargs.h AND stdarg.h. Get |
| rid of varargs.h Include string.h. |
| * (gdbwin_update gdbwin_fputs regs_changed_f bpt_changed_f |
| update): Fix prototypes, fix calls. |
| * (update): Return value for catch_errors. |
| * (run_execute_command togdb_command_from_tty togdb_command): |
| Cleanup catching of errors from calls to execute_command. Also, |
| dup command string to avoid modifying const strings. |
| * (togdb_breakinfo_i_init togdb_breakinfo_i_next): Use 0 instead |
| of NULL when see if b->address isn't set. |
| * (bi_disable_bpt bi_enable_bpt bi_delete_all |
| bi_delete_breakpoint): Add arg to calls to update. |
| * (gui_command): Add prototype. |
| * (mswin_query): Fix prototype. |
| * (_initialize_gdbwin): Dup string to avoid modifying const. |
| * (info_path togdb_get_info_path): Remove const from decls cuz |
| this can't be const (it points at malloc'ed memory). |
| * (togdb_searchpath): Remove const from path. Dup string to |
| avoid modifying const strings. |
| * rindex -> strrchr. |
| * (gdbwin_list_symbols): Regexp param is const. |
| * Fix lots of refs to psymtabs to deref correct pointers. |
| * (togdb_set_breakpoint_sal): Call set_breakpoint_sal with sal, |
| not &sal. |
| * mswin/gdbwin.h (togdb_searchpath togdb_get_info_path |
| toget_set_info_path): Fix prototypes to match reality. |
| * mswin/gui.cpp: Define _beginthreadex and _endthreadex routines |
| with proper prototypes. |
| * mswin/iface.cpp (gdbwin_fputs): Define with correct number of args. |
| * mswin/ser-win32s.c: Fix defs of min and max. |
| * mswin/serdll32.c (OpenComm16): Make cbInQueue and cbOutQueue be |
| USHORT. |
| * (WriteComm16): Change lpBug from LPVOID to LPCSTR. |
| * mswin/serdll32.h: Fix prototypes for OpenComm16 and WriteComm16. |
| |
| Sun Aug 11 20:54:16 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * main.c (main): Make sure command loop is used with cygwin32. |
| * terminal.h: Allow cygwin32 to use termios.h. |
| |
| Fri Aug 9 12:42:49 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * somread.c (som_symtab_read): Handle secondary definition |
| symbols (aka weak symbols). |
| |
| * config/tm-hppa.h (EXTRACT_RETURN_VALUE): Fix thinko in |
| last change. |
| |
| Thu Aug 8 10:12:36 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * symfile.c (symfile_bfd_open): Change ifdef from __WIN32__ to |
| _WIN32. |
| |
| * somread.c: Rearrange order of includes to fix warnings under |
| hpux-10.10. Also don't include sys/file.h. |
| |
| Wed Aug 7 21:45:52 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * dbxread.c: Don't include param.h or sys/file.h. |
| * (dbx_symfile_read): Determine symfile_relocatable from bfd |
| flags instead of file extension. Also clean up a little bit. |
| |
| Wed Aug 7 17:18:37 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * dwarf2read.c dwarfread.c exec.c infcmd.c infrun.c main.c |
| mdebugread.c os9kread.c source.c top.c utils.c: Don't |
| include param.h or sys/file.h (or unistd.h in some cases). |
| * defs.h exec.c inflow.c remote-array.c remote-e7000.c |
| sparcl-tdep.c terminal.h utils.c: Replace all occurances of |
| __WIN32__, WINGDB, WIN32, etc... with _WIN32. |
| * main.c: Remove #ifndef WINGDB around option processing. Fix |
| bug with passing argc==0 and argv==NULL to getopt. |
| * (main) Remove calls to access() before source_command. Let |
| soure_command handle access errors. |
| * maint.c (maintenance_dump_me): #ifdef out for _WIN32. |
| * symtab.c (operator_chars): Make this global for wingdb. |
| * top.c (disconnect): #ifdef out for _WIN32. |
| * (source_command): If got an error and from_tty, then call print |
| error, else just return quietly. |
| * utils.c (fatal_dump_core): Can't kill ourselves under windows. |
| Just exit. |
| * (pollquit notice_quit): #ifdef out stuff that doesn't exist |
| under windows. |
| |
| Wed Aug 7 09:59:19 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Tweak for |
| structures > 4 bytes in size. |
| |
| * valops.c (call_function_by_hand): Handle aligning stacks that |
| grow up correctly. |
| * config/pa/tm-hppa.h (USE_STRUCT_CONVENTION): Define. |
| (STACK_ALIGN): Define. |
| * hppa-tdep.c (hppa_alignof): Don't demand a minumim two byte |
| alignment on structs/unions. |
| |
| Sun Aug 4 16:22:42 1996 Fred Fish <fnf@cygnus.com> |
| |
| * config/powerpc/nm-aix.h (PTRACE_ARG3_TYPE): Define to "int *", |
| which is the documented type under at least AIX 3 and AIX 4. |
| |
| Sat Aug 3 04:02:46 1996 Fred Fish <fnf@cygnus.com> |
| |
| * config/alpha/alpha-osf3.mh (XM_FILE): Change from xm-alpha.h to |
| xm-alphaosf.h. |
| (MMALLOC_CFLAGS): Define NO_MMCHECK to not install consistency |
| checks. |
| |
| Thu Aug 1 10:11:34 1996 Fred Fish <fnf@cygnus.com> |
| |
| * config/mips/tm-mips.h (TM_MIPS_H): Enclose file contents in |
| this, define when contents are included. |
| (mips_read_processor_type): Add prototype. |
| * config/mips/xm-mips.h: Remove strdup decl, now in gdb_string.h |
| * mdebugread.c (ecoff_relocate_efi): Add prototype. |
| (fixup_sigtramp): Only needed when TM_MIPS_H is defined. |
| |
| Wed Jul 31 20:21:24 1996 Fred Fish <fnf@cygnus.com> |
| |
| * rs6000-nat.c (add_vmap): Return 0 to caller rather than random value. |
| (vmap_ldinfo): Ensure got_exec_file is not used uninitialized. |
| (fetch_core_registers): Add prototype. |
| (vmap_symtab): Ditto. |
| (objfile_symbol_add): Ditto. |
| (add_vmap): Ditto. |
| (vmap_ldinfo): Ditto. |
| (vmap_exec): Ditto. |
| |
| Tue Jul 30 17:57:46 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * stabsread.c (get_substring): Declare second arg as int. |
| |
| * remote-es.c: Include gdb_string.h after defs.h. |
| |
| Mon Jul 29 21:13:20 1996 Fred Fish <fnf@cygnus.com> |
| |
| * rs6000-tdep.c (push_arguments): Remove unused variable "pc". |
| (branch_dest): Remove unused variable "offset". |
| (pop_dummy_frame): Add prototype and make static. |
| (push_arguments): Guard against using len uninitialized. |
| (push_arguments): Guard against using arg uninitialized. |
| (frame_saved_pc): Remove unused variable "frameless". |
| (free_loadinfo): Ifdef out unused function. |
| |
| * xcoffread.c (compare_lte): Change prototype and function to |
| be correct type for passing to qsort. |
| (add_stab_to_list): Ifdef out unused function and prototype. |
| (compare_lte): Add prototype |
| (arrange_linetable): Ditto. |
| (record_include_begin): Ditto. |
| (record_include_end): Ditto. |
| (process_linenos): Ditto. |
| (xcoff_next_symbol_text): Ditto. |
| (scan_xcoff_symtab): Ditto. |
| (xcoff_initial_scan): Ditto. |
| |
| * mips-tdep.c (mips_read_processor_type): Add parens around |
| bitwise-and operands in comparison; previous expression always |
| evaluated to 0 because of equality comparison of two constants. |
| |
| * rs6000-tdep.c (skip_prologue): Add missing parens around |
| operands of logical-or so that first operand does not bind |
| to previous logical-and. |
| |
| * configure.in: Expand "long long" test to include code that triggers |
| known problem on HPUX with native compiler. |
| (configure): Regenerated. |
| |
| Mon Jul 29 18:12:27 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * somsolib.c (som_solib_create_inferior_hook): Don't |
| warn if __d_pid can't be found. |
| |
| Sun Jul 28 10:46:39 1996 Fred Fish <fnf@cygnus.com> |
| |
| * config/mips/tm-mips.h (struct frame_info): Forward decl. |
| (struct type): Ditto. |
| (struct value): Ditto. |
| |
| * config/mips/tm-mips.h (sigtramp_address): Move extern decl |
| from mips-tdep.c to here. |
| (sigtramp_end): Ditto. |
| (fixup_sigtramp): Ditto. |
| |
| * config/mips/tm-mips.h (init_extra_frame_info): Add prototype. |
| (mips_frame_chain): Ditto. |
| (mips_step_skips_delay): Ditto. |
| (mips_frame_saved_pc): Ditto. |
| (mips_find_saved_regs): Ditto. |
| (mips_frame_num_args): Ditto. |
| (mips_pop_frame): Ditto. |
| (mips_extract_return_value): Ditto. |
| (mips_store_return_value): Ditto. |
| (mips_push_dummy_frame): Ditto. |
| (mips_push_arguments): Ditto. |
| (mips_do_registers_info): Ditto. |
| (ecoff_relocate_efi): Ditto. |
| (ecoff_relocate_efi): Ditto. |
| * irix4-nat.c (fetch_core_registers): Add prototype. |
| * mips-tdep.c (read_next_frame_reg): Add prototype |
| (heuristic_proc_start): Ditto. |
| (heuristic_proc_desc): Ditto. |
| (mips_print_register): Ditto. |
| * config/mips/nm-irix5.h (procfs_set_watchpoint): Add prototype. |
| (procfs_stopped_by_watchpoint): Ditto. |
| * config/mips/nm-irix4.h (procfs_set_watchpoint): Add prototype. |
| (procfs_stopped_by_watchpoint): Ditto. |
| * config/alpha/tm-alpha.h (ecoff_relocate_efi): Add prototype. |
| (struct symbol): Add forward decl for prototype. |
| |
| * breakpoint.c (internal_breakpoint_number): Only needed if |
| GET_LONGJMP_TARGET or SOLIB_ADD is defined. |
| |
| * objfiles.c (ecoff_relocate_efi): Remove prototype. |
| |
| Sat Jul 27 17:47:35 1996 Fred Fish <fnf@cygnus.com> |
| |
| * configure.in: Add test for "long long" support. |
| * configure: Regenerate with autoconf. |
| * acconfig.h: Add CC_HAS_LONG_LONG |
| * config.in: Regenerate with autoheader. |
| * config/mips/tm-mips64.h (FORCE_LONG_LONG): Remove |
| * config/sparc/tm-sp64.h (CC_HAS_LONG_LONG): Remove. |
| * config/mips/tm-vr4300el.h (CC_HAS_LONG_LONG): Remove. |
| * config/mips/tm-vr4300.h (CC_HAS_LONG_LONG): Remove. |
| * config/mips/xm-irix5.h (CC_HAS_LONG_LONG): Remove |
| (PRINTF_HAS_LONG_LONG): Remove. |
| (FORCE_LONG_LONG): Remove. |
| * config/powerpc/xm-aix.h (UINT_MAX): Undef and use gdb's version. |
| * config/convex/xm-convex.h (CC_HAS_LONG_LONG): Remove |
| (PRINTF_HAS_LONG_LONG): Remove. |
| * config/xm-nbsd.h (CC_HAS_LONG_LONG): Remove. |
| (PRINTF_HAS_LONG_LONG): Remove. |
| * config/pa/tm-hppa.h (GET_FIELD): Put parens around |
| subtraction inside shift. Put parens around subtraction |
| in operand of bitwise and. |
| (struct frame_info): Forward declare |
| if __STDC__ defined. |
| (frame_saved_regs): Ditto. |
| (struct value): Ditto. |
| (struct type): Ditto. |
| (struct inferior_status): Ditto. |
| (init_extra_frame_info): Add prototype. |
| (skip_prologue): Ditto. |
| (frameless_function_invocation): Ditto. |
| (frame_chain): Ditto. |
| (frame_chain_valid): Ditto. |
| (saved_pc_after_call): Ditto. |
| (hppa_fix_call_dummy): Ditto. |
| (hppa_push_arguments): Ditto. |
| (pa_do_registers_info): Ditto. |
| (in_solib_call_trampoline): Ditto. |
| (in_solib_return_trampoline): Ditto. |
| (push_dummy_frame): Ditto. |
| * convex-tdep.c (decout): Use print_longest rather than |
| fprintf_filtered. |
| * defs.h: Remove use of FORCE_LONG_LONG and __GNUC__ to set |
| CC_HAS_LONG_LONG. |
| (INT_MIN): Fix so it works correctly when assigned to a long long. |
| * valprint.c (longest_to_int): Rewrite to remove dependence |
| on INT_MIN and INT_MAX. |
| (print_longest): Rewrite the code that falls back to synthesized |
| hex output when LONGEST value is not representable as in a long and |
| printf doesn't support printing long longs. |
| * ch-valprint.c (chill_val_print): Cast 2nd arg of |
| chill_print_type_scalar to LONGEST. |
| chill_print_type_scalar): Make static and add prototype. |
| * hppa-tdep.c (get_field): Ifdef out unused function. |
| (set_field): Ditto. |
| (extract_3): Ditto. |
| (extract_5_store): Ditto. |
| (extract_11): Ditto. |
| (extract_12): Ditto. |
| (deposit_17): Ditto. |
| (extract_14): Convert to static and add prototype. |
| (deposit_14): Ditto. |
| (extract_21): Ditto. |
| (deposit_21): Ditto. |
| (extract_17): Ditto. |
| (extract_5r_store): Ditto. |
| (extract_5R_store): Ditto. |
| (extract_5_load): Ditto. |
| (find_proc_framesize): Ditto. |
| (find_dummy_frame_regs): Ditto. |
| (sign_extend): Ditto. |
| (find_unwind_entry): Add prototype. |
| (find_return_regnum): Ditto. |
| (unwind_command): Ditto. |
| (find_dummy_frame_regs): Add parens around subtraction in operand |
| of bitwise-and. |
| (skip_prologue): Add parens around operands of logical-and inside |
| operand of logical-or. |
| (sign_extend): Add parens around operands of subtraction inside |
| operand of shift. |
| (low_sign_extend): Ditto. |
| * top.c (filename_completer): Convert old style decl of |
| filename_completion_function into prototype. |
| * f-lang.c (patch_common_entries): Ifdef out unused function. |
| * stabsread.c (read_cfront_baseclasses): Remove unused local |
| variable "msg_noterm". |
| (resolve_cfront_continuation): Remove unused local variable "fip". |
| (read_type): Remove unused variable xtypenums. |
| (read_cfront_static_fields): Remove unused variable "i". |
| (read_cfront_static_fields): Remove unused variable "nfields". |
| (read_cfront_member_functions): Add missing comment terminator. |
| (read_cfront_static_fields): Return 1 rather than random value. |
| (read_cfront_baseclasses): Ditto. |
| (read_cfront_baseclasses): Ditto. |
| (read_cfront_baseclasses): Ditto. |
| * somsolib.c (som_solib_create_inferior_hook): Remove unused |
| variable "u". |
| (som_solib_create_inferior_hook): Remove unused variable |
| shadow_contents. |
| (language.h): Add for needed prototypes. |
| (som_solib_sharedlibrary_command): Add prototype. |
| * hpread.c: (hpread_read_array_type): Add prototype. |
| * somread.c (hpread_build_pysmtabs): Add prototype. |
| (hpread_symfile_finish): Ditto. |
| (hpread_symfile_init): Ditto. |
| * hppah-nat.c (fetch_register): Convert old style decl |
| to prototype. |
| (gdbcore.h): Include for needed prototypes. |
| (fetch_register): Remove unused variable "mess". |
| * remote-pa.c (get_offsets): Ifdef out unused function. |
| (remote_start_remote): Remove unused variable "timeout". |
| (boot_board): Add prototype. |
| (reaad_frame): Add prototype. |
| (getpkt): Remove unused variable "bp". |
| (remote_kill): Add prototype. |
| (remote_mourn): Add prototype. |
| (remote_insert_breakpoint): Add prototype. |
| (remote_remove_breakpoint): Add prototype. |
| * valops.c (value_push): Only use if PUSH_ARGUMENTS is not defined. |
| * infcmd.c (do_registers_info): Only need prototype if |
| DO_REGISTERS_INFO is not defined. |
| (breakpoint_auto_delete_contents): Only need if |
| CALL_DUMMY_BREAKPOINT_OFFSET is defined. |
| |
| Sat Jul 27 08:49:49 1996 Fred Fish <fnf@cygnus.com> |
| |
| * xcoffread.c (xcoff_end_psymtab): Add textlow_not_set parameter. |
| (END_PSYMTAB): Ditto. |
| (scan_xcoff_symtab): Call xcoff_end_psymtab with textlow_not_set. |
| |
| Fri Jul 26 14:07:37 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * printcmd.c (_initialize_printcmd): Initialize |
| tm_print_insn_info.flavour. |
| |
| Thu Jul 25 19:41:31 1996 Fred Fish <fnf@cygnus.com> |
| |
| * Makefile.in (scm-valprint.o): Depends upon gdbcore_h. |
| (arm-tdep.o): Ditto. |
| (dcache.o): Ditto. |
| (i386ly-tdep.o): Ditto. |
| (i960-tdep.o): Ditto. |
| (m68k-tdep.o): Ditto. |
| (nindy-tdep.o): Ditto. |
| (scm-lang.o): Ditto. |
| (w65-tdep.o): Ditto. |
| (z8k-tdep.o): Ditto. |
| (m68k-tdep.o): Depends upon value_h and gdb_string.h |
| (m2-valprint.o): Depends upon m2-lang.h. |
| (sparc-tdep.o): Depends upon gdb_string.h |
| (valprint.o): Depends upon valprint.h |
| |
| * remote-e7000.c (notice_quit): Remove prototype. |
| * top.c (initialize_targets): Remove prototype, now in target.h. |
| * stabsread.c (resolve_cfront_continuation): Remove prototype. |
| * dbxread.c (resolve_cfront_continuation): Remove prototype. |
| * symfile.h (set_demangling_style): Remove prototype. |
| * config/tm-sysv4.h (in_plt_section): Remove prototype, in objfiles.h. |
| * config/sparc/tm-sparc.h (single_step): Remove extern decl, now in |
| target.h. |
| * config/arc/tm-arc.h (one_stepped, single_step): Remove extern decls, |
| now in target.h. |
| * ser-unix.c (hardwire_restore): Remove obsolete prototype. |
| * sparc-tdep.c (single_step): Remove forward decl of isbranch. |
| * scm-lang.c (find_function_in_inferior): Remove prototype. |
| (value_allocate_space_in_inferior): Ditto. |
| * infrun.c (write_pc_pid): Remove prototype, now in inferior.h. |
| * defs.h (strchr): Remove declarations, they are declared in |
| gdb_string.h also. |
| (strrchr): Ditto. |
| (strstr): Ditto. |
| (strtok): Ditto. |
| (strerror): Ditto. |
| * f-valprint.c (f77_print_array_1): Remove extra arg that was being |
| passed to f77_print_array_1. |
| * gdbtypes.c (add_name): Remove unused variables lenstrlen and lenstr. |
| * scm-exp.c (scm_istr2int): Remove unused variable "j". |
| (scm_parse): Remove unused variable "str". |
| * hp300ux-nat.c (store_inferior_register): Remove unused variable |
| "buf". |
| (store_inferior_registers): Remove unnecessary decl "registers". |
| * m68k-tdep.c (m68k_pop_frame): Remove unused variable "fi". |
| * scm-lang.c (scm_get_field): Remove unused variable "val". |
| (scm_lookup_name): Remove unused variable "symval". |
| * objfiles.c (map_to_file): Remove unused local variable "tempfd". |
| * procfs.c (do_attach, do_detach): Remove unused variable "result". |
| (last_resume_pid): Remove unused static variable. |
| * alpha-tdep.c (alpha_linux_sigtramp_offset): Remove unused variable |
| "res". |
| * objfiles.c (map_to_address): Remove unused function. |
| * f-valprint.c (print_max): Remove extraneous extern decl, |
| in valprint.h. |
| (calc_f77_array_dims): Remove extraneous prototype, in f-lang.h. |
| * ch-exp.c (write_lower_upper_value): Remove prototype for |
| type_lower_upper. |
| |
| * gdbtypes.c (cfront_mangle_name): #ifdef out unused function. |
| * ch-exp.c (parse_mode_call): Ditto. |
| * f-valprint.c (there_is_a_visible_common_named): Ditto. |
| * f-lang.c (clear_function_list): Ditto. |
| (get_bf_for_fcn): Ditto. |
| (clear_bf_list): Ditto. |
| (add_common_block): Ditto. |
| (patch_all_commons_by_name): Ditto. |
| (find_first_common_named): Ditto. |
| (add_common_entry): Ditto. |
| (allocate_saved_function_node): Ditto. |
| (allocate_saved_bf_node): Ditto. |
| (allocate_common_entry_node): Ditto. |
| (allocate_saved_f77_common_node): Ditto. |
| |
| * arm-tdep.c (gdbcore.h): Include for necessary prototypes. |
| * dcache.c (gdbcore.h): Ditto. |
| * i386ly-tdep.c (gdbcore.h): Ditto. |
| * i960-tdep.c (gdbcore.h): Ditto. |
| * m2-valprint.c (m2-lang.h): Ditto. |
| * m68k-tdep.c (gdbcore.h): Ditto. |
| (value.h): Ditto. |
| (gdb_string.h): Ditto. |
| * nindy-tdep.c (gdbcore.h): Ditto. |
| * scm-lang.c (gdbcore.h): Ditto. |
| * scm-valprint.c (gdbcore.h): Ditto. |
| * w65-tdep.c (gdbcore.h): Ditto. |
| * z8k-tdep.c (gdbcore.h): Ditto. |
| * sparc-tdep.c (gdb_string.h): Include. |
| * valprint.c (valprint.h): Include. |
| |
| * config/xm-lynx.h: Remove part of comment about INT_MIN |
| redefined warnings from defs.h, since INT_MIN define in |
| defs.h is now protected by #ifndef INT_MIN. |
| * config/i386/xm-i386bsd.h: Ditto. |
| * config/m68k/xm-hp300bsd.h: Ditto. |
| * config/m68k/xm-news.h: Ditto. |
| |
| * config/pa/xm-hppah.h (INT_MIN): Remove bogus INT_MIN |
| definition as 0x80000000. The macro in defs.h is better. |
| * config/i386/xm-i386m3.h (INT_MIN): Ditto. |
| * config/i386/xm-i386mach.h (INT_MIN): Ditto. |
| * config/ns32k/xm-ns32km3.h (INT_MIN): Ditto. |
| * config/pa/xm-hppab.h: Ditto. |
| |
| * core-aout.c (fetch_core_registers): Add prototype. |
| * hp300ux-nat.c (fetch_inferior_register): Ditto. |
| (store_inferior_register_1): Ditto. |
| (store_inferior_register): Ditto. |
| * config/m68k/tm-m68k.h (find_saved_regs): Ditto. |
| *scm-valprint.c (c_val_print): Ditto. |
| * procfs.c (add_fd): Ditto. |
| (remove_fd): Ditto. |
| (wait_fd): Ditto. |
| (sigcodename): Ditto. |
| (sigcodedesc): Ditto. |
| (procfs_kill_inferior): Ditto. |
| (procfs_xfer_memory): Ditto. |
| (procfs_store_registers): Ditto. |
| (create_procinfo): Ditto. |
| (procfs_init_inferior): Ditto. |
| (proc_set_exec_trap): Ditto. |
| (procfs_attach): Ditto. |
| (procfs_detach): Ditto. |
| (procfs_prepare_to_store): Ditto. |
| (procfs_files_info): Ditto. |
| (procfs_open): Ditto. |
| (procfs_wait): Ditto. |
| (procfs_fetch_registers): Ditto. |
| (procfs_mourn_inferior): Ditto. |
| (procfs_can_run): Ditto. |
| (procfs_thread_alive): Ditto. |
| (procfs_stop): Ditto. |
| * alpha-nat.c (fetch_core_registers): Ditto. |
| * config/alpha/tm-alpha.h (alpha_osf_skip_sigtramp_frame): Ditto. |
| * objfiles.c (ecoff_relocate_efi): Ditto. |
| * inflow.c (pass_signal): Ditto. |
| (handle_sigio): Ditto. |
| * annotate.c (breakpoint_changed): Ditto. |
| * callback.c (wrap): Ditto. |
| (fdbad): Ditto. |
| (fdmap): Ditto. |
| * utils.c (malloc_botch): Ditto. |
| (fputs_maybe_filtered): Ditto. |
| (vfprintf_maybe_filtered): Ditto. |
| * defs.h (notice_quit): Ditto. |
| * defs.h (xmalloc, xrealloc): Ditto. |
| * top.c (stop_sig): Ditto. |
| (init_signals): Ditto. |
| (user_defined_command): Ditto. |
| (source_cleanup_lines): Ditto. |
| (dont_repeat_command): Ditto. |
| (serial_log_command): Ditto. |
| (disconnect): Ditto. |
| * target.h (initialize_targets): Ditto. |
| * os9kread.c (read_minimal_symbols): Ditto. |
| * mdebugread.c (mdebug_psymtab_to_symtab): Ditto. |
| (fdr_name): Ditto. |
| (push_parse_stack): Ditto. |
| (pop_parse_stack): Ditto. |
| (is_pending_symbol): Ditto. |
| (add_pending): Ditto. |
| * serial.c (serial_logchar): Ditto. |
| (serial_interface_lookup): Ditto. |
| * serial.h (serial_log_command): Ditto. |
| * f-valprint.c (info_common_command): Ditto. |
| * gdbtypes.h (print_type_scalar): Ditto. |
| * scm-valprint.c (scm_scmlist_print): Ditto. |
| (scm_ipruk): Ditto. |
| * scm-lang.c (scm_printstr): Ditto. |
| (in_eval_c): Ditto. |
| (evaluate_subexp_scm): Ditto. |
| * scm-exp.c (scm_read_token): Ditto. |
| (scm_skip_ws): Ditto. |
| (scm_lreadparen): Ditto. |
| * m2-lang.c (emit_char): Ditto. |
| (m2_printchar): Ditto. |
| (m2_printstr): Ditto. |
| (m2_create_fundamental_type): Ditto. |
| * f-lang.c (emit_char): Ditto. |
| (f_printchar): Ditto. |
| (f_printstr): Ditto. |
| (f_create_fundamental_type): Ditto. |
| * ch-lang.c (chill_printchar): Ditto. |
| (chill_printstr): Ditto. |
| (chill_create_fundamental_type): Ditto. |
| (value_chill_length): Ditto. |
| (value_chill_card): Ditto. |
| (value_chill_max_min): Ditto. |
| (evaluate_subexp_chill): Ditto. |
| * ch-exp.c (PEEK_TOKEN): Ditto. |
| (peek_token_): Ditto. |
| (forward_token_): Ditto. |
| (parse_case_label): Ditto. |
| (parse_opt_untyped_expr): Ditto. |
| (parse_unary_call): Ditto. |
| (parse_call): Ditto. |
| (parse_named_record_element): Ditto. |
| (parse_tuple_element): Ditto. |
| (parse_opt_element_list): Ditto. |
| (parse_tuple): Ditto. |
| (parse_primval): Ditto. |
| (parse_operand6): Ditto. |
| (parse_operand5): Ditto. |
| (parse_operand4): Ditto. |
| (parse_operand3): Ditto. |
| (parse_operand2): Ditto. |
| (parse_operand1): Ditto. |
| (parse_operand0): Ditto. |
| (parse_expr): Ditto. |
| (parse_then_alternative): Ditto. |
| (parse_else_alternative): Ditto. |
| (parse_if_expression): Ditto. |
| (parse_untyped_expr): Ditto. |
| (growbuf_by_size): Ditto. |
| (match_simple_name_string): Ditto. |
| (decode_integer_value): Ditto. |
| (decode_integer_literal): Ditto. |
| (match_float_literal): Ditto. |
| (match_float_literal): Ditto. |
| (match_string_literal): Ditto. |
| (match_character_literal): Ditto. |
| (match_integer_literal): Ditto. |
| (match_bitstring_literal): Ditto. |
| (write_lower_upper_value): Ditto. |
| * ch-lang.h (type_lower_upper): Ditto. |
| * c-lang.c (emit_char): Ditto. |
| * dwarfread.c (free_utypes): Ditto. |
| * stabsread.h (resolve_cfront_continuation): Ditto. |
| * stabsread.c (get_substring): Ditto. |
| (read_one_struct_field): Ditto. |
| * stabsread.h (process_later): Ditto. |
| * demangle.c (set_demangling_command): Ditto. |
| * defs.h (set_demangling_style): Ditto. |
| * maint.c (maintenance_info_command): Ditto. |
| (print_section_table): Ditto. |
| (maintenance_info_sections): Ditto. |
| (maintenance_print_command): Ditto. |
| * symtab.h (maintenance_print_statistics): Ditto. |
| * objfiles.h (in_plt_section): Ditto. |
| * objfiles.c (add_to_objfile_sections): Ditto. |
| * bcache.c (hash): Ditto. |
| (lookup_cache): Ditto. |
| * exec.c (bfdsec_to_vmap): Ditto. |
| (ignore): Ditto. |
| * f-exp.y (growbuf_by_size, match_string_literal): Ditto. |
| * language.c (unk_lang_printchar): Ditto. |
| (unk_lang_printstr): Ditto. |
| (unk_lang_create_fundamental_type): Ditto. |
| (unk_lang_print_type): Ditto. |
| (unk_lang_val_print): Ditto. |
| (unk_lang_value_print): Ditto. |
| * target.c (update_current_target): Ditto. |
| (debug_to_open): Ditto. |
| (debug_to_close): Ditto. |
| (debug_to_attach): Ditto. |
| (debug_to_detach): Ditto. |
| (debug_to_resume): Ditto. |
| (debug_to_wait): Ditto. |
| (debug_to_fetch_registers): Ditto. |
| (debug_to_store_registers): Ditto. |
| (debug_to_prepare_to_store): Ditto. |
| (debug_to_xfer_memory): Ditto. |
| (debug_to_files_info): Ditto. |
| (debug_to_insert_breakpoint): Ditto. |
| (debug_to_remove_breakpoint): Ditto. |
| (debug_to_terminal_init): Ditto. |
| (debug_to_terminal_inferior): Ditto. |
| (debug_to_terminal_ours_for_output): Ditto. |
| (debug_to_terminal_ours): Ditto. |
| (debug_to_terminal_info): Ditto. |
| (debug_to_kill): Ditto. |
| (debug_to_load): Ditto. |
| (debug_to_lookup_symbol): Ditto. |
| (debug_to_create_inferior): Ditto. |
| (debug_to_mourn_inferior): Ditto. |
| (debug_to_can_run): Ditto. |
| (debug_to_notice_signals): Ditto. |
| (debug_to_thread_alive): Ditto. |
| (debug_to_stop): Ditto. |
| * breakpoint.h (set_breakpoint_sal): Ditto. |
| * remote-utils.c (usage): Ditto. |
| * remote.c (set_thread): Ditto. |
| (remote_thread_alive): Ditto. |
| (get_offsets): Ditto. |
| (read_frame): Ditto. |
| (remote_insert_breakpoint): Ditto. |
| (remote_remove_breakpoint): Ditto. |
| * sparc-nat.c (fetch_core_registers): Ditto. |
| * corelow.c (add_to_thread_list): Ditto. |
| (ignore): Ditto. |
| * inftarg.c (proc_wait): Ditto. |
| * infptrace.c (udot_info): Ditto. |
| (fetch_register): Ditto. |
| * ser-unix.c (hardwire_noflush_set_tty_state): Ditto. |
| (hardwire_print_tty_state): Ditto. |
| (hardwire_flush_output): Ditto. |
| (hardwire_flush_input): Ditto. |
| (hardwire_send_break): Ditto. |
| (hardwire_setstopbits): Ditto. |
| * ser-tcp.c (tcp_return_0): Ditto. |
| (tcp_noflush_set_tty_state): Ditto. |
| (tcp_print_tty_state): Ditto. |
| * solib.c (match_main): Ditto. |
| * gdbtypes.c (print_bit_vector): Ditto. |
| (print_arg_types): Ditto. |
| (dump_fn_fieldlists): Ditto. |
| (print_cplus_stuff): Ditto. |
| * symfile.h (entry_point_address): Ditto. |
| * symfile.c (decrement_reading_symtab): Ditto. |
| * valops.c (value_arg_coerce): Ditto. |
| * value.h (find_function_in_inferior): Ditto. |
| (value_allocate_space_in_inferior): Ditto. |
| * values.c (vb_match): Ditto. |
| * thread.c (info_thread_command): Ditto. |
| (restore_current_thread): Ditto. |
| (thread_apply_all_command): Ditto. |
| (thread_apply_command): Ditto. |
| * inferior.h (write_pc_pid): Ditto. |
| * infrun.c (delete_breakpoint_current_contents): Ditto. |
| * breakpoint.c (print_it_normal): Ditto. |
| (watchpoint_check): Ditto. |
| (print_it_done): Ditto. |
| (print_it_noop): Ditto. |
| (maintenance_info_breakpoints): Ditto. |
| (create_longjmp_breakpoint): Ditto. |
| (hbreak_command): Ditto. |
| (thbreak_command): Ditto. |
| (watch_commnd_1): Ditto. |
| (rwatch_command): Ditto. |
| (awatch_command): Ditto. |
| (do_enable_breakpoint): Ditto. |
| * ch-valprint.c (chill_val_print_array_elements): Ditto. |
| * eval.c (evaluate_subexp): Ditto. |
| (get_label): Ditto. |
| (evaluate_struct_tuple): Ditto. |
| * eval.c (init_array_element): Ditto. |
| |
| * alpha-tdep.c (push_sigtramp_desc): Add prototype and make static. |
| * breakpoint.c (hw_breakpoint_used_count): Ditto. |
| (hw_watchpoint_used_count): Ditto. |
| * findvar.c (write_register_gen): Ditto. |
| (read_register_pid): Ditto. |
| * symtab.c (cplusplus_hint): Ditto. |
| * infcmd.c (breakpoint_auto_delete_contents): Ditto. |
| * ch-valprint.c (chill_print_type_scalar): Ditto. |
| * gdbtypes.c (add_name): Ditto. |
| (add_mangled_type): Ditto. |
| (cfront_mangle_name): Ditto. |
| * sparc-tdep.c (isbranch): Ditto. |
| * inftarg.c (child_stop): Ditto. |
| * win32-nat.c (child_stop): Ditto. |
| * mac-nat.c (child_stop): Ditto. |
| * remote-utils.c (sr_com): Ditto. |
| * dbxread.c (process_now): Ditto. |
| * ch-exp.c (require): Ditto. |
| (check_token): Ditto. |
| (expect): Ditto. |
| (parse_mode_call): Ditto. |
| (parse_mode_or_normal_call): Ditto. |
| * scm-lang.c (scm_lookup_name): Ditto |
| * f-lang.c (allocate_saved_bf_node): Ditto. |
| (allocate_saved_function_node): Ditto. |
| (allocate_saved_f77_common_node): Ditto. |
| (allocate_common_entry_node): Ditto. |
| (add_common_block): Ditto. |
| (add_common_entry): Ditto. |
| (find_first_common_named): Ditto. |
| (patch_common_entries): Ditto. |
| (patch_all_commons_by_name): Ditto. |
| (clear_bf_list): Ditto. |
| (get_bf_for_fcn): Ditto. |
| (clear_function_list): Ditto. |
| * scm-exp.c (scm_istr2int): Ditto. |
| (scm_istring2number): Ditto. |
| * scm-valprint.c (scm_inferior_print): Ditto. |
| * f-typeprint.c (print_equivalent_f77_float_type): Ditto. |
| * f-valprint.c (f77_get_dynamic_length_of_aggregate): Ditto. |
| (f77_create_arrayprint_offset_tbl): Ditto. |
| (f77_print_array_1): Ditto. |
| (f77_print_array): Ditto. |
| (list_all_visible_commons): Ditto. |
| (there_is_a_visible_common_named): Ditto. |
| * mdebugread.c (ecoff_relocate_efi): Ditto. |
| * callback.c (os_close): Ditto. |
| (os_get_errno): Ditto. |
| (os_isatty): Ditto. |
| (os_lseek): Ditto. |
| (os_open): Ditto. |
| (os_read): Ditto. |
| (os_read_stdin): Ditto. |
| (os_write): Ditto. |
| (os_write_stdout): Ditto. |
| (os_rename): Ditto. |
| (os_system): Ditto. |
| (os_time): Ditto. |
| (os_unlink): Ditto. |
| (os_shutdown): Ditto. |
| (os_init): Ditto. |
| (os_printf_filtered): Ditto. |
| |
| * scm-lang.h (scm_parse): Change old style decl to prototype. |
| * config/alpha/tm-alphalinux.h (alpha_linux_sigtramp_offset): Ditto. |
| * top.c (init_proc): Ditto. |
| (query_hook): Ditto. |
| (error_hook): Ditto. |
| * f-lang.c (c_value_print): Ditto. |
| * ch-exp.c (parse_expression): Ditto. |
| (parse_primval): Ditto. |
| (parse_untyped_expr): Ditto. |
| (parse_opt_untyped_expr): Ditto. |
| (ch_lex): Ditto. |
| * config/sparc/tm-sparc.h (sparc_init_extra_frame_info): Ditto. |
| (sparc_frame_saved_pc): Ditto. |
| (sparc_push_dummy_frame): Ditto. |
| (sparc_pop_frame): Ditto. |
| * defs.h (fclose): Ditto. |
| (atof): Ditto. |
| (error_hook): Ditto. |
| |
| * arc-tdep.c (single_step): Change arg to type "enum target_signal". |
| * rs6000-tdep.c (single_step): Ditto. |
| * sparc-tdep.c (single_step): Ditto. |
| |
| * breakpoint.c (cleanup_executing_breakpoints): Change unused arg type |
| to PTR which is what make_cleanup expects. |
| * utils.c (null_cleanup): Change arg type to PTR. |
| * defs.h (null_cleanup): Change prototype to match actual function. |
| * config/sparc/tm-sparc.h (struct frame_info): Move forward decl. |
| * ch-valprint.c (chill_val_print): Cast 2nd arg of |
| chill_print_type_scalar to LONGEST. |
| * infrun.c (wait_for_inferior): Have empty switch case for |
| BPSTAT_WHAT_CHECK_SHLIBS when SOLIB_ADD is not defined. |
| (stop_on_solib_events): Only needed if SOLIB_ADD is defined. |
| * infcmd.c (attach_command): Only need auto_solib_add if SOLIB_ADD |
| is defined. |
| * symfile.c (generic_load): Scan long int using a long int spec, |
| not an int spec. |
| * infptrace.c (udot_info): Only need local variables if KERNEL_U_SIZE |
| is defined. |
| (fetch_register): Only need function if FETCH_INFERIOR_REGISTERS is |
| not defined. |
| * inflow.c (handle_sigio): Only need prototype when the actual |
| function is compiled in. |
| * valprint.c (longest_to_int): Expand error message to be |
| separate messages for args larger than largest signed int |
| and args smaller than smallest signed int. |
| * valprint.c (print_longest): Fix problems with support for case |
| where compiler supports type "long long" but the runtime doesn't |
| support printing them with "%ll". |
| * scm-valprint.c (scm_scmlist_print, scm_scmval_print): Change |
| return types to void since we don't actually return anything |
| meaningful and callees ignore the values anyway. |
| * procfs.c (modify_inherit_on_fork_flag): Enclose pr_flags in PIOCSET |
| ifdef. |
| (modify_run_on_last_close_flag): Ditto. |
| (wait_fd): Enclose local variables "num_fds" and "i" LOSING_POLL |
| ifdef |
| * alpha-tdep.c (push_sigtramp_desc): Return proc_desc rather than |
| random value. |
| * infrun.c (wait_for_inferior): Ensure random_signal is not used |
| uninitialized. |
| * valops.c (call_function_by_hand): Ensure struct_addr is not used |
| uninitialized. |
| * breakpoint.c (watch_command_1): Ensure prev_frame is not used |
| uninitialized. |
| * utils.c (vfprintf_maybe_filtered): Change second arg from "char *" |
| to "const char *". |
| * infptrace.c (udot_info): Add two dummy args so that the type is |
| correct for passing to add_info. |
| * f-lang.c (saved_fcn): Move decl to head of file so it can be used |
| in prototypes. |
| (saved_bf_symnum): Ditto. |
| (SAVED_FUNCTION): Ditto. |
| (SAVED_FUNCTION_PTR): Ditto. |
| (SAVED_BF): Ditto. |
| (SAVED_BF_PTR): Ditto. |
| * ch-exp.c (parse_named_record_element): Build error message in |
| temporary buffer before passing it to expect, rather than passing |
| wrong number of args to expect. |
| * demangle.c (set_demangling_style): Call set_demangling_command with |
| correct number of arguments. |
| * inferior.h (terminal_init_inferior_with_pgrp): Change arg type to |
| int to match actual function. |
| (os_isatty): Call fdmap with right number of arguments, was missing |
| the host_callback* arg. |
| * target.c (cleanup_target): Prototype all functions casts. |
| * target.h (one_stepped, single_step): Declare here and convert |
| single_step to prototype. |
| * infrun.c (one_stepped, single_step): Don't declare externs |
| here, they have moved to target.h. |
| * eval.c (init_array_element): Declare previously undeclared |
| last two args as LONGEST. |
| * dcache.c (dcache_xfer_memory): Change xfunc decls to prototype form. |
| |
| Thu Jul 25 16:11:54 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * dsrec.c (load_srec): Protect ANSI style function parms with PARAMS. |
| |
| Mon Jul 22 18:13:27 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * Makefile.in (os9kread.o): Remove dependency on partial-stab.h. |
| * dbxread.c (read_dbx_symtab end_psymtab), partial-stab.h: Don't |
| use partial_symtab->textlow==0 as a flag, as 0 is a legitimate |
| text address. Use a seperate flag (textlow_not_set) instead. |
| This makes stabs in ELF .o files work a lot better. |
| * mdebugread.c xcoffread.c: Define textlow_not_set for |
| partial-stab.h. |
| * stabsread.h (end_psymtab): Add textlow_not_set arg to prototype. |
| |
| Sat Jul 20 10:41:06 1996 Fred Fish <fnf@cygnus.com> |
| |
| * dwarf2read.c (struct filenames): Change internal "struct file" |
| to "struct fileinfo" to avoid conflict with "struct file" in |
| <sys/file.h> on HPUX and Solaris. |
| |
| Fri Jul 19 14:05:57 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * dwarf2read.c: New file, DWARF 2 reader originally contributed by |
| Brent Benson, with additions by Gary Funck and Jerry Kreuscher. |
| * Makefile.in (COMMON_OBS): Add dwarf2read.o. |
| (SFILES): Add dwarf2read.c. |
| (dwarf2read.o): Add build rule. |
| * symfile.h (dwarf2_has_info, dwarf2_build_psymtabs): Declare |
| exported functions. |
| * elfread.c (elf_symfile_read): Call them. |
| (elf_symtab_read) [HARRIS_TARGET]: Skip some special symbols. |
| |
| Thu Jul 18 01:22:01 1996 Geoffrey Noer <noer@cygnus.com> |
| |
| * symfile.c (symfile_bfd_open): |
| * exec.c (exec_file_command): for __GO32__ and __WIN32__ systems, |
| free the user from having to type the .exe extension. |
| |
| Wed Jul 17 06:54:50 1996 Mark Alexander <marka@cygnus.com> |
| |
| * mon960-rom.c: Shorten the mon960_inits string to a single |
| carriage return; this prevents a hang on connecting immediately |
| after powerup, when MON960 is attempting autobaud detection. |
| |
| Tue Jul 16 23:47:04 1996 Mark Alexander <marka@cygnus.com> |
| |
| * a29k-tdep.c (get_saved_register): Allow PC to be modified |
| when innermost frame is selected, but not in outer frames. |
| |
| Tue Jul 16 23:37:25 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * command.c (do_setshow_command): Don't segfault when showing |
| var_string and var_string_noescape vars that are NULL. |
| |
| Mon Jul 15 16:55:48 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * win32-nat.c (handle_load_dll): dos_path_to_unix_path renamed to |
| cygwin32_conv_to_posix_path. |
| (child_create_inferior): unix_path_to_dos_path renamed to |
| cygwin32_conv_to_win32_path. Rewrite code to translate PATH. |
| |
| Mon Jul 15 16:44:05 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * defs.h printcmd.c: Create global disassemble_info structure |
| tm_print_insn_info. |
| * i386-tdep.c (set_assembly_language_command): set |
| tm_print_insn_info.mach to the appropriate value for 386 or 8086 |
| disassembly. |
| * printcmd.c (print_insn): Move init of disassembler_info to |
| _initialize_printcmd. Set endian for disassembler here. |
| * sparc-tdep.c: Set tm_print_insn_info.mach as appropriate to |
| select sparc/sparclite. |
| * config/sparc/{tm-sparc.h tm-sparclite.h}: Get rid of |
| TM_PRINT_INSN. Set TM_PRINT_INSN_MACH to |
| bfd_mach_sparc/bfd_mach_sparc_sparclite. |
| |
| Fri Jul 12 19:04:32 1996 Fred Fish <fnf@cygnus.com> |
| |
| * hpread.c (hpread_lookup_type): Use xmmalloc/xmrealloc rather |
| than xmalloc/xrealloc. |
| |
| Fri Jul 12 17:59:47 1996 Fred Fish <fnf@cygnus.com> |
| |
| * objfiles.c (map_to_file): Error return from mmalloc_findbase is |
| a NULL pointer, not a -1. |
| |
| Fri Jul 12 10:16:24 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * i386-tdep.c (set_assembly_language_command): New routine to |
| select between i386 and i8086 instruction sets for disassembly. |
| New command `set assembly-language {i386 i8086}'. |
| |
| Thu Jul 11 21:13:21 1996 Mark Alexander <marka@cygnus.com> |
| |
| * monitor.c (monitor_write_memory, monitor_read_memory_single): |
| Disable use of "long long" memory read/write commands; can't |
| use them because we hold the values to read/write in an int |
| variable, and because strtoul fails on values that exceed the |
| size of a long. This fixes breakpoint problems on MON960. |
| |
| Thu Jul 11 11:39:31 1996 Fred Fish <fnf@cygnus.com> |
| |
| * config/m68k/xm-hp300hpux.h (HAVE_MMAP): Remove definition. |
| * config/pa/xm-hppah.h (HAVE_MMAP): Ditto. |
| |
| Wed Jul 10 16:54:41 1996 Fred Fish <fnf@cygnus.com> |
| |
| * Makefile.in (MMALLOC_CFLAGS): Eliminate intermediate MMALLOC_DISABLE |
| and MMALLOC_CHECK macros, and add comment indicating how host dependent |
| makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or |
| to use it but to not do heap corruption checking. |
| * gdbserver/Makefile.in: Ditto. |
| * utils.c (init_malloc): Replace warning() use with direct call of |
| fprintf_unfiltered, since current_target has not yet been set and thus |
| we cannot use warning(). If we try to use mmcheck and it fails, |
| suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE |
| defined. Other small mmalloc related cleanups. |
| * config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1. |
| * config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK. |
| |
| * config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): |
| * config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): |
| * config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): |
| * config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): |
| * config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT); |
| * config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): |
| * config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): |
| * config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): |
| Remove obsolete defines. |
| |
| * config/alpha/alpha-linux.mh (MMALLOC_DISABLE): |
| * config/alpha/alpha-osf1.mh (MMALLOC_DISABLE): |
| * config/rs6000/rs6000.mh (MMALLOC_DISABLE): |
| * config/rs6000/aix4.mh (MMALLOC_DISABLE): |
| * config/powerpc/aix4.mh (MMALLOC_DISABLE): |
| * config/powerpc/aix.mh (MMALLOC_DISABLE): |
| * config/ns32k/ns32km3.mh (MMALLOC_DISABLE): |
| * config/mips/mipsm3.mh (MMALLOC_DISABLE): |
| * config/mips/decstation.mh (MMALLOC_DISABLE): |
| * config/m88k/cxux.mh (MMALLOC_DISABLE): |
| * config/i386/i386mk.mh (MMALLOC_DISABLE): |
| * config/i386/i386m3.mh (MMALLOC_DISABLE): |
| * config/i386/i386gnu.mh (MMALLOC_DISABLE): |
| Use MMALLOC_CFLAGS instead. |
| |
| Tue Jul 9 22:41:12 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * h8300-tdep.c: Remove some outdated comments. |
| (h8300_skip_prologue): Rework to be more correct for the H8/300H. |
| Handle stm.l insns for the H8/S. |
| (examine_prologue): Likewise. |
| |
| Tue Jul 9 16:48:55 1996 Raymond Jou <rjou@mexican.cygnus.com> |
| |
| * ser-mac.c (mac_close): Change a typo SetSetBuf to SerSetBuf. |
| |
| Mon Jul 08 08:50:39 1996 Mark Alexander <marka@cygnus.com> |
| |
| * mon960-rom.c (mon960_open): Add floating point detection to |
| prevent hang on non-FPU processors (PR 9775). |
| (mon960_cmds): Swap setmem.cmdw and setmem.cmdl to fix problem |
| setting breakpoints and improve loading speed. |
| |
| Sun Jul 7 14:57:34 1996 Fred Fish <fnf@cygnus.com> |
| |
| * coffread.c (record_minimal_symbol): Don't presave name string |
| on symbol_obstack before passing to prim_record_minimal_symbol. |
| It now handles saving the string itself. |
| * dbxread.c (read_dbx_dynamic_symtab): Ditto. |
| * mipsread.c (read_alphacoff_dynamic_symtab): Ditto. |
| * os9kread.c (record_minimal_symbol): Ditto. |
| * solib.c (solib_add_common_symbols): Ditto. |
| |
| * coffread.c (coff_symtab_read): Don't presave name string on |
| symbol_obstack before passing to prim_record_minimal_symbol_and_info. |
| It now handles saving the string itself. |
| * dbxread.c (record_minimal_symbol): Ditto. |
| * elfread.c (record_minimal_symbol_and_info): Ditto. |
| |
| * dstread.c (record_minimal_symbol): Remove static function that just |
| called prim_record_minimal_symbol with the same args (after change to |
| prim_record_minimal_symbol to do it's own name string saves). |
| * nlmread.c (record_minimal_symbol): Ditto. |
| * somread.c (record_minimal_symbol): Ditto. |
| |
| * hpread.c (hpread_read_enum_type): Save symbol name on symbol obstack. |
| (hpread_read_function_type): Ditto. |
| (hpread_process_one_debug_symbol): Ditto. |
| * mdebugread.c (parse_symbol): Ditto. |
| (new_symbol): Ditto. |
| * minsyms.c (prim_record_minimal_symbol_and_info): Ditto. |
| |
| * coffread.c (process_coff_symbol): Use obsavestring to save |
| SYMBOL_NAME, rather than obstack_copy0. |
| * dstread.c (create_new_symbol): Ditto |
| * symfile.c (obconcat): Ditto. |
| * stabsread.c (patch_block_stabs): Ditto. |
| * xcoffread.c (SYMNAME_ALLOC): Ditto. |
| |
| * symfile.c (obsavestring): Update comments |
| * solib.c (solib_add_common_symbols): Remove local var origname. |
| |
| Wed Jul 3 15:56:08 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * configure: Re-build with autoconf-2.10. |
| |
| * sparcl-tdep.c (_initialize_sparc_tdep) config/sparc/tm-sparc.h, |
| config/sparc/tm-sparclite.h: Initialize tm_print_insn from |
| TM_PRINT_INSN, which comes from the tm file. |
| |
| Tue Jul 02 21:41:20 1996 Mark Alexander <marka@cygnus.com> |
| |
| * coffread.c, dbxread.c, elfread.c, mipsread.c, nlmread.c, |
| os9kread.c: Replace identical sym_offsets functions with |
| default_symfile_offsets. |
| * somread.c (som_symfile_offsets): Use new SIZEOF_SECTION_OFFSETS |
| macro to allocate section_offsets. |
| * symfile.c (default_symfile_offsets): New function. |
| * symfile.h: Declare default_symfile_offsets. |
| * symtab.h: Define SIZEOF_SECTION_OFFSETS macro to |
| simplify allocation of section_offsets. |
| |
| Tue Jun 11 12:02:55 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * Makefile.in (INTERNAL_LDFLAGS): Add in flags from configure. |
| * configure configure.in: Only make sol-thread.o for native. |
| Also, switch to dlopened libthread_db.so.1. |
| * sol-thread.c: Switch to using dlopen to get the thread_db |
| library. |
| |
| Thu Jun 13 16:53:25 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * configure, configure.in: Change test for libthread_db to only |
| work for configs where build/host/target are the same. |
| |
| Tue Jul 2 15:04:20 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * config/powerpc/{linux.mh,xm-linux.h}: New files, for Linux on |
| PowerPC. |
| |
| * configure.in (powerpc-*-linux): Add Linux, System V, and ELF |
| support. |
| * configure: Regenerate. |
| |
| Mon Jul 1 13:00:43 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| From Raymond Jou <rjou@mexican.cygnus.com>: |
| * mpw-make.sed: Add lines to whack out autoconf hook |
| @CONFIG_LDFLAGS@. |
| |
| Mon Jul 01 11:07:15 1996 Mark Alexander <marka@cygnus.com> |
| |
| * remote-e7000.c (e7000_stop): New function. |
| |
| Fri Jun 28 06:34:19 1996 Dawn Perchik <dawn@cygnus.com> |
| |
| * configure, configure.in: Add target sparclet. |
| * monitor.h, monitor.c: Added monitor flags MO_NO_ECHO_ON_SETMEM |
| (don't expect echo on setmem command), MO_RUN_FIRST_TIME (if |
| command to start process running on target is different from one |
| to continue execution), MO_HEX_PREFIX (if addresses from monitor |
| have a "0x" prefix). |
| * monitor.c, parse.c, sparc-tdep.c: Don't require strings in the |
| registers array. This is to allow NULLs to be place holders in |
| the tm-*.h file so that only minor changes are needed when a new |
| processor is introduced (eg, one without floating point). |
| * sparc-tdep.c: Conditionally remove dependancies on floating |
| point. |
| * sparclet-rom.c, config/sparc/sparclet.mt, |
| config/sparc/tm-sparclet.h: New files for target sparclet. |
| * symfile.c (load_command): Add option for 2nd parameter; a load |
| offset added to the vma of each section. |
| |
| Fri Jun 28 05:39:19 1996 Dawn Perchik <dawn@cygnus.com> |
| |
| * main.c (main): Add option "l" for setting remote_timeout. |
| |
| Fri Jun 28 05:25:18 1996 Dawn Perchik <dawn@cygnus.com> |
| |
| * remote-e7000.c, remote.c, target.h, top.c: Add set option |
| "remote_timeout" for setting remote_timeout. Add set option |
| "use_hard_breakpoints" for setting hardware .vs. memory |
| breakpoints. |
| |
| Fri Jun 28 04:32:18 1996 Dawn Perchik <dawn@cygnus.com> |
| |
| * remote-e7000.c (e7000_parse_device): New function. |
| Add option "tcp_remote" to target command if using |
| tcp to connect to a remote host which is then connected |
| via serial port to the e7000 (for exampole, a port master). |
| (e7000_open): Change to call e7000_parse_device. |
| |
| Fri Jun 28 03:47:17 1996 Dawn Perchik <dawn@cygnus.com> |
| |
| * monitor.c (monitor_debug): Fix remotedebug buffering. |
| |
| Thu Jun 27 18:24:17 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * config/i386/cygwin32.mh, config/powerpc/cygwin32.mh |
| (NATDEPFILES): Add a space. |
| |
| Wed Jun 26 06:05:39 1996 Wilfried Moser <moser@rtl.cygnus.com> |
| |
| * gdbtypes.c (create_array_type): If TYPE_LENGTH (result_type) |
| is zero, set TYPE_FLAG_TARGET_STUB to force reevaluation of the type. |
| |
| * ch-exp.c (calculate_array_length): Function removed. |
| |
| Tue Jun 25 17:41:06 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * remote-e7000.c (e7000_read_inferior_memory_large): New function. |
| (e7000_xfer_inferior_memory): Call it. |
| |
| Tue Jun 25 23:14:07 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) |
| |
| * gdb/gdbserver/Makefile.in (docdir): Removed. |
| |
| Tue Jun 25 22:05:38 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) |
| |
| * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir): |
| Use autoconf set values. |
| (docdir): Removed. |
| * configure.in (AC_PREREQ): autoconf 2.5 or higher. |
| * nlm/Makefile.in (bindir, libdir, datadir, mandir, infodir, |
| includedir): Use autoconf set values. |
| (docdir): Removed. |
| * nlm/configure.in (AC_PREREQ): autoconf 2.5 or higher. |
| * nlm/configure: Rebuilt. |
| * gdb/gdbserver/Makefile.in (datadir): Set to $(prefix)/share. |
| |
| Mon Jun 24 09:56:14 1996 Angela Marie Thomas (angela@cygnus.com) |
| |
| * stabsread.c (read_cfront_member_functions): add type |
| |
| Sun Jun 23 23:40:48 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * win32-nat.c: #include <unistd.h>. |
| (unix_paths_to_dos_paths, dos_paths_to_unix_paths): Delete. |
| (child_create_inferior): Convert only env var PATH to win32 style. |
| (set_pathstyle_dos): Delete. |
| (_initialize_inftarg): Delete dos-path-style command. |
| |
| Thu Jun 20 13:42:23 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * configure.in: Revise sol-thread.o test. |
| * configure: Regenerated. |
| |
| * source.c (find_source_lines): Reassign size to result of read. |
| |
| Tue Jun 18 16:25:54 1996 Jeffrey A. Law <law@rtl.cygnus.com> |
| |
| * h8300-dep.c (gdb_print_insn_h8300): Handle the H8/S. |
| (h8300_command): Likewise. |
| (set_machine): Likewise. |
| (set_machine_hook): Likewise. |
| (_initialize_h8300m): Likewise. |
| |
| * config/h8300/tm-h8300.h (h8300smode): Declare. |
| |
| Sun Jun 16 15:21:51 1996 Jeffrey A. Law <law@rtl.cygnus.com> |
| |
| * somsolib.c (som_solib_create_inferior_hook): Handle tracking |
| of shl_load calls for hpux10. |
| |
| Thu Jun 13 11:16:10 1996 Tom Tromey <tromey@thepub.cygnus.com> |
| |
| * config.in: Regenerated. |
| * acconfig.h (HAVE_THREAD_DB_LIB): Added entry. |
| |
| * configure: Regenerated. |
| * aclocal.m4 (CY_AC_PATH_TCLH, CY_AC_PATH_TKH): Use odd names to |
| avoid name clashes with SunOS headers. |
| |
| Tue Jun 11 19:52:50 1996 Fred Fish <fnf@cygnus.com> |
| |
| From Michael Snyder <Michael_Snyder@next.com>: |
| * bcache.c (print_bcache_statistics): Avoid divide-by-zero |
| exception if one or more objfile has no symbols, such as when |
| a dynamic library has been stripped. |
| |
| Tue Jun 11 12:02:55 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * Makefile.in (INTERNAL_LDFLAGS): Add in flags from configure. |
| * configure configure.in: Only make sol-thread.o for native. |
| Also, switch to dlopened libthread_db.so.1. |
| * sol-thread.c: Switch to using dlopen to get the thread_db |
| library. |
| |
| Mon Jun 10 14:17:19 1996 Fred Fish <fnf@cygnus.com> |
| |
| * config/sparc/{xm-sun4sol2.h,xm-sun4os4.h} (MMAP_BASE_ADDRESS): |
| Change from 0xE0000000 to 0xC0000000. |
| |
| Thu Jun 6 17:10:32 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * config/powerpc/xm-solaris.h: Initial version of support for |
| Solaris on PowerPC. |
| |
| Wed Jun 5 01:52:57 1996 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * configure.in (configdirs): Force 4100 builds to use 4300 GDB |
| target. |
| * configure: Rebuild. |
| |
| * config/mips/vr4300el.mt (SIM_OBS): Include simulator in |
| little-endian builds. |
| |
| Mon Jun 3 11:48:29 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * inftarg.c (child_thread_alive): Protect declaration with |
| #ifndef CHILD_THREAD_ALIVE. |
| |
| * source.c (find_source_lines): Check the time on the symtab's bfd if |
| it exists, else check the time on the exec_bfd. |
| |
| Thu May 30 09:43:17 1996 Mark Alexander <marka@cygnus.com> |
| |
| * dsrec.c (make_srec): Fix calculation of address size |
| to allow addresses less than 0x100. |
| |
| Thu May 30 04:24:09 1996 Wilfried Moser <moser@rtl.cygnus.com> |
| |
| * ch-exp.c (ch_lex): In case of LOC_TYPEDEF call calculate_array_length. |
| |
| Tue May 28 16:15:47 1996 Geoffrey Noer <noer@cygnus.com> |
| |
| * remote-mips.c: cannot use EINVAL for breakpoint test since |
| its value varies for different hosts (e.g. go32's is 19, while |
| sunos is 22). Changed to hardcoded 22 since that is what the |
| mips boards return. |
| |
| Tue May 28 11:14:58 1996 Tom Tromey <tromey@creche.cygnus.com> |
| |
| * configure: Regenerated. |
| * aclocal.m4 (CY_AC_PATH_TCLH): Don't use AC_TRY_RUN. |
| (CY_AC_PATH_TKH): Don't use AC_TRY_RUN. |
| |
| Sun May 26 16:56:35 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * solib.c (solib_absolute_prefix, solib_search_path): New variables. |
| (_initialize_solib): Add set/show commands for those variables. |
| (solib_map_sections): Implement searching using them. |
| |
| Sun May 26 14:14:49 1996 Fred Fish <fnf@cygnus.com> |
| |
| Changes from: David Mosberger-Tang <davidm@azstarnet.com> |
| |
| * NEWS: Add Alpha Linux as a new native configuration. |
| |
| * mdebugread.c (parse_symbol): When we find a malloc() symbol with |
| return type VOID, assume no debugging info is available for that |
| object file and patch the return value into VOID *. Otherwise, |
| operations requiring an implicit call to malloc() will fail. |
| |
| * infrun.c (wait_for_inferior): The criterion to detect entering a |
| sigtramp handler is now: (a) the current pc is inside a sigtramp |
| handler, (b) the previous pc is not in a sigtramp handler, and (c) |
| the current stack pointer is "inner" than the old one. Condition |
| (c) is new to avoid mistaking a return from a signal handler into |
| sigtramp as a new sigtramp invocation. |
| |
| * dcache.c (struct dcache_block): Declare addr as CORE_ADDR. An |
| int may not be big enough to hold an address. |
| (dcache_hit): Ditto. |
| (dcache_peek_byte): Fix indentation. |
| |
| * configure.in (alpha-*-linux*): Add target. |
| * configure: Rebuild |
| |
| * config/alpha/tm-alpha.h (PROC_DESC_IS_DYN_SIGTRAMP): New macro. |
| (SET_PROC_DESC_IS_DYN_SIGTRAMP): Ditto. |
| (DYNAMIC_SIGTRAMP_OFFSET): Ditto. |
| (SIGCONTEXT_ADDR): Ditto. |
| (FRAME_PAST_SIGTRAMP_FRAME): Ditto. |
| |
| * config/alpha/alpha-linux.mh: New file. |
| * config/alpha/alpha-linux.mt: Ditto. |
| * config/alpha/nm-linux.h: Ditto. |
| * config/alpha/tm-alphalinux.h: Ditto. |
| * config/alpha/xm-alphalinux.h: Ditto. |
| * config/alpha/xm-alphaosf.h: Renamed from xm-alpha.h. |
| * config/alpha/alpha-osf1.mh (XM_FILE): Change from xm-alpha.h to |
| xm-alphaosf.h. |
| * config/alpha/alpha-osf2.mh: Ditto. |
| |
| * blockframe.c (find_pc_partial_function): Pass PC to |
| SIGTRAMP_START and SIGTRAMP_END macros for the benefit of systems |
| that detect sigtramp code via designated code sequences (as is the |
| case for Linux/Alpha, for example). |
| |
| * config/i386/tm-i386bsd.h: Change SIGTRAMP_START and SIGTRAMP_END |
| to ignore new PC argument. |
| * config/m68k/tm-hp300bsd.h: Ditto. |
| * config/vax/tm-vax.h: Ditto. |
| |
| * alpha-tdep.c (alpha_linux_sigtramp_offset): New function. |
| (alpha_osf_skip_sigtramp_frame): Ditto. |
| (push_sigtramp_desc): Ditto. |
| (alpha_find_saved_regs): Use SIGCONTEXT_ADDR macro to extract |
| sigcontext address from frame. |
| (alpha_saved_pc_after_call): When in sigtramp, use |
| alpha_frame_saved_pc() instead of read-register(). |
| (after_prologue): When inside a dynamically generated sigtramp |
| function, there is no prologue, so return address of first |
| instruction. |
| (alpha_in_prologue): Fix typo in comment. |
| (find_proc_desc): Use macro DYNAMIC_SIGTRAMP_OFFSET to determine |
| whether we're inside a dynamicaly generated sigtramp function. If |
| so, create and push and appropriate procedure descriptor. |
| (alpha_frame_chain): Use macro FRAME_PAST_SIGTRAMP_FRAME to obtain |
| the frame past a sigtramp frame (if the current frame is indeed a |
| sigtramp function). |
| (init_extra_frame_info): Don't read next frame register off of |
| stack-pointer when inside a dynamiccaly generated sigtramp. |
| (alpha_pop_frame): Also unlink and destroy procedure descriptors |
| created for dynamically generated sigtramp functions. |
| |
| * alpha-nat.c: When compiling under Linux, include <asm/reg.h> and |
| <alpha/ptrace.h> instead of <machine/reg.h> |
| |
| Tue Jul 2 13:58:10 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.c (inf_validate_task_sc): |
| Give terminal to gdb while asking question. |
| (inf_resume): Don't validate the task suspend-count while execing. |
| |
| Thu Jun 13 11:04:52 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.c (inf_validate_task_sc): Query user before clearing any |
| additional suspend count. |
| (S_proc_wait_reply, gnu_attach): Don't call inf_validate_task_sc. |
| (inf_resume): Call inf_validate_task_sc here. |
| (gnu_resume): Call inf_update_procs to ensure noticing new threads. |
| |
| Fri Jun 7 17:00:43 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.c (gnu_create_inferior: attach_to_child): Return PID. |
| |
| Thu May 23 15:13:56 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * h8300-tdep.c (IS_PUSH): Refine. |
| (IS_MOVE_FP, IS_MOV_SP_FP): Accept H8/300H varaints. |
| (IS_SUB4_SP, IS_SUBL_SP): New macros. |
| (h8300_skip_prologue): Handle H8/300H prologue code sequences. |
| (examine_prologue): Handle addresses from 0x010000 to 0xffffff |
| when in H8/300H mode. Get the return pointer's address correctly |
| for the H8/300H. Handle H8/300H prolouge code sequences. |
| |
| * symfile.c (generic_load): Print the starting address |
| of the file just loaded. |
| |
| Thu May 23 12:09:52 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * mpw-make.sed: Edit @THREAD_DB_OBS@ out of makefile. |
| |
| Tue May 21 11:53:56 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * breakpoint.c (bpstat_do_actions): Avoid endless recursion |
| if a `source' command is contained in bs->commands. |
| |
| * infrun.c (wait_for_inferior): Update step_frame_address when |
| stepping into a new line. |
| |
| From schwab@issan.informatik.uni-dortmund.de (Andreas Schwab): |
| * breakpoint.c (breakpoint_1): Add shlib_disabled case to |
| bpenables array. |
| |
| Mon May 20 22:52:00 1996 Mark Alexander <marka@cygnus.com> |
| |
| * dsrec.c (load_srec): Add WAITACK parameter, for machines |
| like EST visionICE that send back an ACK after each S-record. |
| * monitor.c (monitor_wait_srec_ack): New function. |
| (monitor_load): Pass monitor_wait_srec_ack to load_srec |
| if the monitor's MO_SREC_ACK flag is set. |
| * monitor.h: Define MO_SREC_ACK flag. |
| * remote-est.c (est_cmds): Add MO_SREC_ACK flag. |
| * sh3-rom.c (sh3_load): Accomodate change in load_srec prototype. |
| * srec.h: Add WAITACK parameter to load_srec prototype. |
| |
| Sun May 19 21:22:00 1996 Rob Savoye <rob@chinadoll> |
| |
| * config/sparc/sparclite.mt: Add the sparc simulator. |
| |
| Sun May 19 16:49:37 1996 Fred Fish <fnf@cygnus.com> |
| |
| * defs.h (read_command_lines, query_hook): Update prototypes. |
| (readline_begin_hook, readline_hook, readline_end_hook): Declare. |
| * breakpoint.c (commands_command): Build message in temporary buffer |
| and pass that, as well as tty control flag, to read_command_lines. |
| * top.c (readline_begin_hook, readline_hook, readline_end_hook): |
| Define here. |
| (command_loop): Check for non-NULL instream before looping. |
| (command_line_input): Use readline_hook when appropriate, to get |
| user input from a GUI window. |
| (read_next_line): Also build prompt if getting user input from a GUI. |
| (recurse_read_control_structure): Fix typo in comment. |
| (read_command_lines): Use passed in prompt and tty flag to decide how |
| to build message. Use readline_begin_hook when appropriate, to set |
| up a GUI interaction window. Just return head, whether NULL or not, |
| after using readline_end_hook to complete GUI interaction. |
| (define_command, document_command): Build message in a temporary |
| buffer and pass it to read_command_lines, along with tty flag. |
| |
| |
| Sat May 18 02:43:58 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * blockframe.c (frameless_look_for_prologue): |
| Add FUNCTION_START_OFFSET only if func_start is non-zero. |
| * minsyms.c (lookup_minimal_symbol_by_pc): Return NULL if |
| pc is not in a known section. |
| * stack.c (print_frame_info): Remove check for fi->pc in known |
| section, now handled by lookup_minimal_symbol_by_pc. |
| |
| |
| Fri May 17 13:31:04 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * sh-stub.c: New file, was config/sh/stub.c. |
| |
| |
| Wed May 15 08:25:12 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * top.c (read_next_line): Fix thinkos. From Donn Seeley. |
| |
| * coffread.c (coff_symtab_read): Handle C_LABEL symbols like |
| C_STAT symbols. |
| * h8300-tdep.c (h8300_pop_frame): Reset $sp and $pc correctly. |
| Flush cached frames just before exiting. |
| * remote-sim.c (gdbsim_resume): Complain if the program isn't |
| being run. |
| * config/h8300/tm-h8300.h (BELIEVE_PCC_PROMOTION): Define. |
| |
| Tue May 14 18:05:16 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * procfs.c (procfs_thread_alive procfs_stop): Make static. |
| (procfs_pid_to_str): New routine to print out thread id's in an |
| intelligible manner. |
| * sol-thread.c (sol_thread_fetch_registers): Re-order manner in |
| which supply_register is called to fix bug with writing |
| individual regs. |
| * config/sparc/tm-sun4sol2.h: Define default for |
| target_pid_to_str in case host lacks libthread_db. |
| |
| Mon May 13 23:53:30 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * Makefile.in config.in configure configure.in |
| config/sparc/nm-sun4sol2.h config/sparc/sun4sol2.mh |
| config/sparc/tm-sun4sol2.h: Use autoconf to config Solaris thread |
| and pthread support, since pre-2.5 systems don't come with |
| libthread_db.so.1. |
| |
| * procfs.c (info_proc): Use int instead of id_t. Old versions of |
| Irix don't seem to define this. |
| |
| Mon May 13 17:40:58 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * top.c (execute_control_command, case while_control): Allow |
| a while command to be interrupted. |
| |
| Mon May 13 16:17:36 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * sol-thread.c: More cleanup, add comments. |
| (sol_thread_resume): Prevent people from trying to step |
| inactive threads. |
| (sol_thread_wait sol_thread_fetch_registers |
| sol_thread_store_registers): Remove unnecessary check for |
| sol_thread_active. These routines won't get called unless threads |
| are active. |
| |
| Mon May 13 11:29:37 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| SH3-E support from Allan Tajii <atajii@hmsi.com>: |
| * sh-tdep.c (sh_reg_names, sh3_reg_names): Add empty names for |
| float registers. |
| (sh3e_reg_names): New register name array. |
| (sh_processor_type_table): Add sh3e processor type. |
| * config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): Fix test. |
| (REGISTER_NAMES, NUM_REGS, NUM_REALREGS, etc): Adjust for |
| full set of registers. |
| * remote-e7000.c (want_sh3, want_sh3_nopc): New globals. |
| (e7000_fetch_registers, e7000_wait): Use them. |
| * sh3-rom.c (sh3_regnames): Add float registers. |
| (sh3e_cmds, sh3e_ops): New globals. |
| (sh3e_open): New function. |
| (_initialize_sh3_rom): Rename from _initialize_sh3, set up |
| sh3e target vector. |
| |
| Fri May 10 15:53:38 1996 Stu Grossman (grossman@lisa.cygnus.com) |
| |
| * sol-thread.c: Cleanup. gcc -Wall fixes. Add prototypes. |
| Print out messages instead of codes for thread_db errors. Make |
| access macros for thread and lwp manipulation. Make cleanups to |
| fixup inferior_pid in case of errors. |
| |
| Thu May 9 19:06:02 1996 Fred Fish <fnf@cygnus.com> |
| |
| * aclocal.m4: Remove unused definition of AC_C_CROSS. |
| * configure.in: Add powerpcle-*-solaris* host and target config |
| so April 30th change does not get lost next time configure is |
| rebuilt. |
| |
| Thu May 9 14:13:08 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * Makefile.in, breakpoint.c, corelow.c, fork-child.c, inflow.c, |
| infrun.c, mac-nat.c, procfs.c, remote.c, sol-thread.c, thread.c, |
| win32-nat.c, config/nm-lynx.h: Rename thread.h to gdbthread.h to |
| avoid conflict with Solaris /usr/include/thread.h. |
| |
| Thu May 9 12:33:32 1996 Rob Savoye <rob@chinadoll.cygnus.com> |
| |
| * abug-rom.c: Config file for the older style ABug monitor that |
| runs on the mvme13x boards. |
| * config/m68k/monitor.mt: Add abug support for m68k cross |
| debugging. |
| |
| Wed May 8 20:33:24 1996 Fred Fish <fnf@cygnus.com> |
| |
| * infcmd.c (do_registers_info): Always print the raw floating |
| point value's bytes in big endian order, so the the leftmost bit |
| is the most significant. |
| * breakpoint.c (clear_momentary_breakpoints): Remove dead code |
| that is referenced nowhere else. |
| (set_breakpoint): Ditto. |
| (do_enable_breakpoint): Created from enable_once_breakpoint |
| with a couple of changes. |
| (enable_breakpoint): Call do_enable_breakpoint with an appropriate |
| bpdisp enum value to set disposition of breakpoint. |
| (enable_once_breakpoint): Ditto. |
| (enable_delete_breakpoint): Ditto. |
| * breakpoint.h (clear_momentary_breakpoints): Remove prototype. |
| * symtab.c (find_pc_line): Improve comments. |
| * xcoffread.c: Ditto. |
| |
| Tue May 7 18:37:06 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * target.c (debug_to_xfer_memory): Insert line breaks when |
| dumping the memory block. |
| |
| Mon May 6 13:52:52 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * fork-child.c (fork_inferior), inferior.h: init_trace_fun now |
| returns a possibly modified pid. |
| * inftarg.c (ptrace_him): Now returns pid; |
| * m3-nat.c (m3_trace_him): Now returns pid; |
| * infcmd.c (run_command): Minor cleanup. |
| * infrun.c (wait_for_inferior): Add another check for one_stepped |
| near where we read the pc to avoid erroneously setting |
| random_signal for multi-threaded support. |
| * procfs.c: Add support for Solaris LWPs. Remove def of |
| LOSING_POLL. Many cleanups... Several workarounds for Solaris |
| lossage. System call entry and exit are now handled by |
| dynamically registered handlers. |
| * (syscallname): Don't barf when handed an unknown syscall |
| number. |
| * (info_proc_syscalls): Ditto. |
| * sol-thread.c: New file. Implements Solaris thread support. |
| * symfile.c (symbol_file_add): Add call to target_new_objfile to |
| notify target-dependent code about new symbol tables. |
| * (clear_symtab_users): Call target_new_objfile to notify it of |
| the removal of all symbol tables. |
| * target.c (push_target): Make sure that to_close is non-zero |
| before calling it. |
| * target.h (target_new_objfile): Provide default. |
| * config/alpha/nm-osf2.h: Define LOSING_POLL because this version |
| of OSF can't hack using poll with /proc. |
| * config/sparc/nm-sun4sol2.h (target_new_objfile): Define to be |
| sol-thread-new-objfile. |
| * config/sparc/sun4sol2.mh: Add sol-thread.o to NATDEFFILES, and |
| add libthread_db.so.1 to NAT_CLIBS. |
| * config/sparc/tm-sun4sol2.h: Define PIDGET, TIDGET, and |
| target_pid_to_str. |
| |
| Sat May 4 02:13:34 1996 N Srin Kumar <nsrin@wipinfo.soft.net> |
| |
| * procfs.c (remove_fd): Fix copy of fds to fill hole left after |
| removal of the requested fd. |
| |
| Mon May 6 07:52:48 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * rs6000-tdep.c (_initialize_rs6000_tdep): Don't do XCOFF specific |
| hooks under ELF. |
| |
| * config/powerpc/tm-ppc-eabi.h: Define ELF_OBJECT_FORMAT. |
| |
| Thu May 2 12:46:14 1996 Jeffrey A Law (law@cygnus.com) |
| |
| From Peter Schauer: |
| * breakpoint.h (enum bpdisp): Add del_at_next_stop. |
| * breakpoint.c (insert_breakpoints, watchpoint_check, |
| bpstat_stop_status): Avoid bad references to memory freed via |
| delete_breakpoint on watchpoints going out of scope. |
| Do not delete these watchpoints, disable them and change their |
| disposition to del_at_next_stop instead. |
| (breakpoint_auto_delete): Delete all breakpoints whose disposition |
| is del_at_next_stop. |
| (breakpoint_init_inferior): Use switch to avoid reference to |
| already deleted breakpoint. |
| |
| Wed May 1 17:29:18 1996 Fred Fish <fnf@cygnus.com> |
| |
| * Makefile.in (rs6000-nat.o): Depend on xcoffsolib.h. |
| * config/rs6000/rs6000.mh (NATDEPFILES): Move xcoffread.o ... |
| * config/rs6000/rs6000.mt (TDEPFILES): ... to here. |
| * xcoffsolib.c (xcoff_relocate_symtab_hook): Define and initialize. |
| (solib_info): Call xcoff_relocate_symtab via the hook. |
| (sharedlibrary_command): Ditto. |
| * xcoffread.c: Remove all FAKING_RS6000 comments and defines. |
| (xcoff_add_toc_to_loadinfo_hook): Define and initialize here. |
| (xcoff_init_loadinfo_hook): Define and initialize here. |
| (scan_xcoff_symtab): Call xcoff_add_toc_to_loadinfo via the hook. |
| (xcoff_initial_scan): Call xcoff_init_loadinfo via the hook. |
| * xcoffsolib.h (xcoff_relocate_symtab_hook): Declare extern func. |
| * rs6000-tdep.c (_initialize_rs6000_tdep): Add initializations |
| of xcoff_add_toc_to_loadinfo_hook and xcoff_init_loadinfo_hook. |
| * rs6000-nat.c (_initialize_core_rs6000): Add initialization |
| of xcoff_relocate_symtab_hook. |
| |
| Tue Apr 30 13:22:02 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * configure (powerpcle-*-solaris*): Add Solaris support. |
| |
| * config/powerpc/{solaris.m[ht],tm-solaris.h}: New files for |
| Solaris support. |
| |
| Mon Apr 29 16:17:31 1996 Dawn Perchik <dawn@cygnus.com> |
| |
| * c-valprint.c (c_val_print): Fix printing for arrays defined |
| with 0 length. |
| |
| Sun Apr 28 15:08:05 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| Support for bi-endian remote breakpoints. |
| * remote.c (big_break_insn, little_break_insn): New globals. |
| (break_insn): Remove. |
| (remote_insert_breakpoint, remote_remove_breakpoint): Use own |
| code if REMOTE_BREAKPOINT defined, otherwise call memory |
| breakpoint functions. |
| * config/sh/tm-sh.h (REMOTE_BREAKPOINT): Remove. |
| (BIG_REMOTE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT): Define. |
| |
| * mon960-rom.c (mon960_cmds): Remove forward decl. |
| (mon960_load): Use current_monitor instead of mon960_cmds. |
| (mon960_regnames): Remove backslashes from line ends. |
| (_initialize_mon960): Fix documentation string. |
| |
| Sun Apr 28 12:10:35 1996 Fred Fish <fnf@cygnus.com> |
| |
| * symfile.h (psymbol_allocation_list): Expand comments which |
| describe the psymbol allocation list and how each field is |
| used. |
| |
| Sun Apr 28 03:44:30 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * breakpoint.c (delete_breakpoint): Fix bpt->val, bpt->exp |
| storage leaks. |
| (breakpoint_re_set_one): Fix b->exp, b->val, b->cond storage leaks. |
| |
| * infcmd.c (run_command), solib.c (locate_base): Check for |
| target_has_execution in addition to inferior_pid, a core file |
| from a threaded program is yielding a non-zero inferior_pid. |
| |
| * sparc-tdep.c (get_saved_register): Handle window registers |
| in a dummy frame correctly. |
| |
| Sat Apr 27 20:38:32 1996 Fred Fish <fnf@cygnus.com> |
| |
| * Makefile.in (CLIBS): Move $(MMALLOC) past all other libs, |
| so that anything that wants an allocation function not yet pulled |
| in, will get it from mmalloc rather than a system library. |
| * Makefile.in (INSTALLED_LIBS): Reorder to match order of CLIBS, |
| to avoid surprising results when used. |
| |
| Sat Apr 27 00:12:05 1996 Dawn Perchik (dawn@cygnus.com) |
| |
| * stabsread.c: Changes and bug fixes for cfront support. |
| Fix bug for class data members. |
| Fix parsing bug when no base classes exist. |
| Fix memory bug - allocate space for cplusplus specific info. |
| Add support for static data. |
| Add prototypes for static functions. |
| Enhance comments to show what each function expects to parse. |
| Cleanup code. |
| * stabsread.c(resolve_cont),dbxread.c(resolve_cont): Rename |
| function to resolve_cfront_continuation. |
| |
| Fri Apr 26 23:58:26 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * infrun.c (wait_for_inferior): Call registers_changed when |
| restarting the inferior to get over a nullified instruction. |
| |
| Tue Apr 24 12:12:55 1996 Dawn Perchik (dawn@cygnus.com) |
| |
| * dbxread.c,stabsread.c,gdbtypes.c,partial-stab.h,valops.c: |
| Add new support for parsing cfront stabs. |
| |
| Wed Apr 24 00:32:55 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * infrun.c (wait_for_inferior): Move "have_waited" label |
| outside of #ifdef conditionals. Don't trash the wait status |
| if we get a signal and the current instruction is nullified. |
| |
| Mon Apr 22 20:17:01 1996 Fred Fish <fnf@cygnus.com> |
| |
| * Makefile.in (VERSION): Bump version number to 4.16.1. |
| * NEWS: Update for 4.16 release. |
| |
| Mon Apr 22 16:32:29 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * monitor.h: Clean up comment formatting. |
| (current_monitor): Remove decl. |
| (LOADTYPES, LOADPROTOS, INIT_CMD, etc): Remove definitions. |
| (push_monitor, SREC_SIZE): Remove. |
| * monitor.c: Expand old macro into current_monitor derefs |
| everywhere. |
| * remote-os9k.c (current_monitor): Remove definition. |
| |
| Mon Apr 22 14:54:45 1996 Mark Alexander <marka@superball.cygnus.com> |
| |
| * corefile.c (specify_exec_file_hook): Allow arbitrary number of |
| hooks. |
| (call_extra_exec_file_hooks): New function. |
| * h8300-tdep.c: Lint; add .h files to provide missing declarations, |
| remove unused variables. |
| (set_machine_hook): New function. |
| (_initialize_h8300m): Initialize it. |
| |
| Fri Apr 19 15:03:49 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * remote-mips.c (encoding): Don't specify size, to avoid bug in |
| SunOS native compiler. |
| |
| Thu Apr 18 18:46:57 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * monitor.c: Use int rather than LONGEST for values, since |
| the formatting strings are not prepared to accept long longs. |
| |
| Wed Apr 17 20:17:27 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * arm-tdep.c (initialize_arm_tdep): Make apcs32 a `zinteger'. |
| |
| Tue Apr 16 17:38:23 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * corelow.c (add_to_thread_list): Make sure reg_sect is non-null |
| before de-referencing it. Prevents deref of NULL pointer if core |
| file lacks .reg section. |
| * defs.h: Rename floatformat_{to from}_long_double to |
| floatformat_{to from}_doublest. Get rid of FLOATFORMAT_{TO |
| FROM}... macros. |
| * findvar.c (extract_floating store_floating): Change all refs to |
| FLOATFORMAT_{FROM TO}... to floatformat_{from to}_doublest. |
| * utils.c: Change floatformat_{to from}_long_double to |
| floatformat_{to from}_doublest cuz the new routines will use |
| whatever size (double or long double) is appropriate. |
| * config/i960/tm-i960.h (REGISTER_CONVERT_TO_VIRTUAL |
| REGISTER_CONVERT_TO_RAW): Change FLOATFORMAT... macros to |
| floatformat... routine calls. |
| |
| Mon Apr 15 16:34:11 1996 Per Bothner <bothner@kalessin.cygnus.com> |
| |
| * stabsread.c (read_type): Move handling of '@' from type |
| number handling to handling of types proper (as emitted by gcc!). |
| For typedefs, allocate the typedef type before reading its |
| definition, to properly handling recursive types. |
| |
| Mon Apr 15 11:19:26 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * ch-exp.c (calculate_array_length): Fix prototype. |
| |
| Sat Apr 13 14:21:16 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * remote-nindy.c (nindy_open): Acquire more target state so that |
| user can attach to a previously running program. |
| * (nindy_fetch_registers nindy_store_registers): Get rid of fp |
| conversion code. That's all handled in {extract store}_floating |
| now. |
| * utils.c (floatformat_to_double): Don't bias exponent when |
| handling zero's, denorms or NaNs. |
| * config/i960/tm-i960.h (REGISTER_CONVERT_TO_VIRTUAL |
| REGISTER_CONVERT_TO_RAW): Change to using DOUBLST and |
| FLOATFORMAT_TO/FROM_DOUBLEST macros. |
| * config/i960/tm-nindy960.h: Undefine |
| REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW, and |
| REGISTER_CONVERTIBLE. These are no longer necessary now that all |
| the magic happens in extract/store_floating. |
| |
| Sat Apr 13 02:58:02 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * eval.c (evaluate_subexp_standard): Report error when attempting to |
| evaluate subscripts for types which cannot be subscripted. |
| |
| * valarith.c (value_x_binop, value_x_unop): Add noside parameter. |
| Return a zero value with the return type of the member function |
| if noside is EVAL_AVOID_SIDE_EFFECTS instead of calling the member |
| function. |
| * values.h (value_x_binop, value_x_unop): Update prototypes |
| accordingly. |
| * eval.c (evaluate_subexp_standard): Update all callers of |
| value_x_binop, value_x_unop accordingly. |
| |
| * valarith.c (value_neg, value_complement): Perform ANSI C/C++ |
| integral promotion on operands. |
| |
| Fri Apr 12 13:19:27 1996 Fred Fish <fnf@cygnus.com> |
| |
| * README: Update for 4.16 release. |
| * configure.in (AC_CHECK_FUNCS): Also check for sbrk. |
| * configure: Regenerate with autoconf. |
| * config.in: Regenerate with autoheader. |
| * main.c (main): Only use sbrk() when HAVE_SBRK is defined. |
| * top.c (command_loop): Ditto. |
| |
| Fri Apr 12 09:45:29 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * defs.h: Define TARGET_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT |
| defaults for bi-endian targets. Replace function pointers for |
| floatformat routines with macros. No need for these to be runtime |
| selectable. |
| * findvar.c: Get rid of floatformat function pointers. Use |
| macros in extract_floating and store_floating. |
| * remote-nindy.c (nindy_fetch_registers nindy_store_registers): |
| Use floatformat macros. |
| |
| Thu Apr 11 21:28:02 1996 Fred Fish <fnf@cygnus.com> |
| |
| From: Miles Bader <miles@gnu.ai.mit.edu> |
| * configure.in (AC_CHECK_HEADERS): check for endian.h. |
| Use AC_CHECK_TOOL to find AR & RANLIB. Add AC_PROG_AWK. |
| Add host & target cases for i[345]86-*-gnu*. |
| * config.in: Regenerate with autoheader. |
| * configure: Regenerate with autoconf. |
| * Makefile.in (AR, AWK): Set from corresponding autoconf substs. |
| (init.c): Don't scan mig-generated files. |
| * defs.h (endian.h): Include if HAVE_ENDIAN_H defined. |
| * config/nm-m3.h (ATTACH_NO_WAIT): Define. |
| * infcmd.c (attach_command): Use "#ifndef ATTACH_NO_WAIT" |
| rather than "#ifndef MACH". |
| |
| Thu Apr 11 18:49:42 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * remote.c (remotewritesize): New GDB variable, controls size |
| of memory packets sent to the target. |
| |
| Thu Apr 11 13:47:52 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * dcache.c: Add prototypes. Make many functions static. |
| * (dcache_peek dcache_fetch dcache_poke): Make dcache_fetch and |
| dcache_poke call dcache_xfer_memory directly in order to fix |
| problems with turning off dcache. dcache_peek is now unnecessary, |
| so it goes away. |
| |
| * defs.h: Define new macros HOST_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT |
| and TARGET_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT to specify a pointer |
| to a struct floatformat. This allows for better handling of |
| targets whose floating point formats differ from the host by more |
| than just byte order. |
| * (floatformat_to_long_double floatformat_from_long_double): |
| Prototypes for new functions in utils.c. |
| * (floatformat_to_doublest floatformat_from_doublest): Prototypes |
| for pointers to floating point conversion functions. The actual |
| function uses either double or long double if the host supports it. |
| * findvar.c (floatformat_to_doublest floatformat_from_doublest): |
| Initialize to point at correct function depending on HAVE_LONG_DOUBLE. |
| * (extract_floating store_floating): Rewrite. Now, if host fp |
| format is the same as the target, we just do a copy. Otherwise, |
| we call floatformat_{to from}_doublest. |
| * remote-nindy.c (nindy_xfer_inferior_memory): Change param |
| `write' to `should_write'. |
| * utils.c (floatformat_to_long_double |
| floatformat_from_long_double): New routines that implement long |
| double versions of functions in libiberty/floatformat.c. |
| * config/i960/tm-i960.h (TARGET_LONG_DOUBLE_FORMAT): Define this for |
| i960 extended real (80 bit) numbers. |
| * nindy-share/nindy.c (ninMemGet ninMemPut): Return number of bytes |
| actually read or written. |
| |
| Wed Apr 10 02:56:06 1996 Wilfried Moser <moser@rtl.cygnus.com> |
| |
| * ch-valprint.c (chill_val_print): Remove call to calculate_array_length. |
| (calculate_array_length): Move function from here ... |
| |
| * ch-exp.c (calculate_array_length): ... to here. |
| (parse_primval): If we have a symbol with an array type |
| and the length is 0, call calculate_array_length. |
| |
| Tue Apr 9 01:23:05 1996 Wilfried Moser <moser@rtl.cygnus.com> |
| |
| * eval.c (evaluate_subexp_standard): In case of TYPE_CODE_SET: |
| Add some checks for powerset compatibility. |
| |
| * valops.c (value_slice): Use lowbound instead of lowerbound for |
| call to slice_range_type to get correct bounds. |
| |
| Mon Apr 8 12:53:56 1996 Fred Fish <fnf@cygnus.com> |
| |
| * Makefile.in (scm-exp.o, scm-lang.o, scm-valprint.o): Add targets and |
| dependencies. |
| * scm-lang.c (gdb_string.h): Include. |
| * objfiles.c (add_to_objfile_sections): Cast second arg of obstack_grow |
| call to correct type (char *). |
| * cp-valprint.c (cp_print_static_field): Ditto. |
| * somsolib.c (som_solib_create_inferior_hook): Add a declaration |
| for external find_unwind_entry function (from hppa-tdep.c). |
| * remote-pa.c (remote_write_bytes, remote_read_bytes): Change |
| type of second arg to "char *" to be type compatible with |
| dcache. |
| (remote_wait): Cast second arg to strtol to correct type. |
| * hppa-tdep.c (compare_unwind_entries): Change argument types to |
| "const void *" to be type compatible with qsort, and then |
| assign to local args prior to use. |
| |
| Mon Apr 8 15:35:52 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * infptrace.c (kill_inferior): Remove call to "kill"; update |
| comments. |
| |
| Mon Apr 8 14:05:07 1996 Geoffrey Noer <noer@cygnus.com> |
| |
| * remote-e7000.c: don't append :23 to target port if __WIN32__ |
| is defined (it's WinGDB). |
| |
| Sun Apr 7 22:34:29 1996 Fred Fish <fnf@cygnus.com> |
| |
| From: Miles Bader <miles@gnu.ai.mit.edu> |
| * gnu-nat.c, gnu-nat.h, msg.defs, exc_request.defs, i386gnu-nat.c, |
| msg_reply.defs, notify.defs, process_reply.defs, reply_mig_hack.awk, |
| config/nm-gnu.h, config/i386/{i386gnu.mh, i386gnu.mt, nm-gnu.h, |
| m-i386gnu.h, xm-i386gnu.h}: New files for GNU hurd. |
| |
| Sun Apr 7 13:32:41 1996 Fred Fish <fnf@cygnus.com> |
| |
| * configure.in (case host): Add i386sco5 host. |
| * configure: Regenerate. |
| |
| From: Robert Lipe <robertl@dgii.com> |
| Add support for SCO OpenServer 5 (a.k.a. 3.2v5*) This |
| target is an SVR3.2 with COFF, ELF, and shared libes, but |
| no /proc. |
| * config/i386/i386sco5.mh: New file. |
| * config/i386/nm-i386sco5.h: New file. |
| |
| Sat Apr 6 08:55:22 1996 Fred Fish <fnf@cygnus.com> |
| |
| * bcache.c (bcache): When size of chunk to cache is exactly equal to |
| BCACHE_MAXLENGTH, stash chunk as unique copy. |
| |
| Sat Apr 6 00:46:26 1996 Fred Fish <fnf@cygnus.com> |
| |
| * symfile.c (INLINE_ADD_PSYMBOL): Remove ifdef. |
| (add_psymbol_to_list): Add an arg for passing CORE_ADDR values and |
| use it, rather than calling add_psymbol_addr_to_list. |
| (add_psymbol_addr_to_list): Delete. |
| (add_psymbol_to_list): Make psymbol static to avoid random data in |
| gaps due to alignment of structure members. |
| * symfile.h (INLINE_ADD_PSYMBOL, ADD_PSYMBOL_TO_LIST, |
| ADD_PSYMBOL_ADDR_TO_LIST): Remove. Real world tests show no |
| performance improvements by inlining via complicated macros and |
| they just make gdb larger and harder to maintain. |
| * dwarfread.c (add_enum_psymbol): Replace ADD_PSYMBOL_TO_LIST |
| and/or ADD_PSYMBOL_ADDR_TO_LIST macro(s) with call to |
| add_psymbol_to_list with appropriate long or CORE_ADDR args. |
| (add_partial_symbol): Ditto. |
| * partial-stab.h: Ditto. |
| * os9kread.c (read_os9k_psymtab): Ditto |
| * mdebugread.c (parse_partial_symbols): Ditto. |
| (handle_psymbol_enumerators): Ditto. |
| (demangle.h): Include. |
| * hpread.c (hpread_build_psymtabs): Ditto. |
| (hpread_build_psymtabs): Ditto. |
| (demangle.h): Include |
| |
| Thu Apr 4 20:16:55 1996 Fred Fish <fnf@cygnus.com> |
| |
| * configure.in: Check for setpgid function. |
| * config.in: Regenerate with autoheader. |
| * configure: Regenerate with autoconf. |
| * inflow.c (_initialize_inflow): Only try to use _SC_JOB_CONTROL |
| if it is actually defined. |
| (gdb_setpgid): Use HAVE_SETPGID. |
| * ch-exp.c: Change include of <string.h> to "gdb_string.h". |
| * c-exp.y, f-exp.y, m2-exp.y: Ditto. |
| * c-exp.y, serial.c: Include <ctype.h>. |
| * config/m68k/nm-news.h: Add typedef for pid_t which is |
| apparently missing from <sys/types.h>. Enclose entire |
| file in NM_NEWS_H ifndef and define when included. |
| * config/mips/nm-news-mips.h: Ditto. |
| * config/m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL, |
| REGISTER_CONVERT_TO_RAW): Change name of temporary variable. |
| |
| Thu Apr 4 19:04:18 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * arm-xdep.c: Move native-specific code to here from arm-tdep.c. |
| * arm-tdep.c (arm_apcs_32): New global. |
| (arm_addr_bits_remove, arm_saved_pc_after_call, |
| arm_push_dummy_frame, arm_pop_frame): New functions. |
| (arm_skip_prologue): Updated version from Richard Earnshaw. |
| (_initialize_arm_tdep): Add set/show "apcs32". |
| * config/arm/tm-arm.h (ADDR_BITS_REMOVE): Call |
| arm_addr_bits_remove. |
| (SAVED_PC_AFTER_CALL): Call arm_saved_pc_after_call. |
| (frame_find_saved_regs): Declare properly. |
| (PUSH_DUMMY_FRAME): Call arm_push_dummy_frame. |
| (POP_FRAME): Call arm_pop_frame, use ADDR_BITS_REMOVE instead of |
| explicit mask. |
| * config/arm/nm-arm.h: New file. |
| * config/arm/xm-arm.h (KERNEL_U_ADDR, FETCH_INFERIOR_REGISTERS): |
| Move definitions to nm-arm.h. |
| * config/arm/arm.mh (NAT_FILE): Define. |
| |
| * symfile.c (generic_load): Initialize data_count properly. |
| |
| Thu Apr 4 17:17:53 1996 Fred Fish <fnf@cygnus.com> |
| |
| * symmisc.c (print_objfile_statistics): Print memory used by |
| psymbol cache obstack. |
| |
| Thu Apr 4 15:43:07 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * symfile.c (report_transfer_performance): New function. |
| (generic_load): Call it to report transfer rate. |
| * remote-e7000.c (e7000_load): Ditto. |
| |
| Mon Apr 1 16:31:00 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * mpw-make.sed: Change references to config.h to be in objdir, |
| edit out rules to rebuild config.h. |
| |
| Mon Apr 1 08:32:23 1996 Fred Fish <fnf@cygnus.com> |
| |
| * hppa-tdep.c (hppa_pop_frame): Call clear_proceed_status before |
| proceeding. |
| |
| Sun Mar 31 16:15:43 1996 Fred Fish <fnf@cygnus.com> |
| |
| * hppah-nat.c (store_inferior_registers, store_inferior_registers, |
| fetch_register, child_xfer_memory): Use call_ptrace function supplied |
| by infptrace.c rather than calling ptrace directly. |
| |
| Sun Mar 31 15:39:00 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * mon960-rom.c: Cleanups and elimination of unused code, |
| clarify documentation string. |
| (mon960_serial, mon960_ttyname): Remove. |
| * config/i960/tm-mon960.h (ADDITIONAL_OPTIONS, |
| ADDITIONAL_OPTION_CASES, ADDITIONAL_OPTION_HELP): Remove. |
| |
| Sat Mar 30 11:00:22 1996 Fred Fish <fnf@cygnus.com> |
| |
| * configure.in: Check whether printf family supports printing |
| long doubles or not and define PRINTF_HAS_LONG_DOUBLE if so. |
| * acconfig.h: Provide default undef for PRINTF_HAS_LONG_DOUBLE. |
| * configure: Regenerate. |
| * valprint.c (print_floating): Use PRINTF_HAS_LONG_DOUBLE. |
| * c-exp.y (parse_number): Use PRINTF_HAS_LONG_DOUBLE. |
| * configure.in: Fix have_gregset and have_fpregset autoconf |
| variable names so that they match the pattern required to |
| cache them. |
| |
| Fri Mar 29 21:39:56 1996 Fred Fish <fnf@cygnus.com> |
| |
| * core-aout.c (fetch_core_registers): Cast core_reg_size to int |
| before testing against reg_ptr. |
| * eval.c (evaluate_subexp_standard): Cast type of |
| TYPE_FN_FIELD_VOFFSET to int. |
| * findvar.c (extract_signed_integer, extract_unsigned_integer, |
| extract_long_unsigned_integer): Cast type of sizeof to int. |
| * values.c (unpack_field_as_long, modify_field): Ditto. |
| * valops.c (value_assign, call_function_by_hand): Ditto. |
| * infcmd.c (do_registers_info): Ditto. |
| * ser-tcp.c (tcp_open): Ditto. |
| * remote.c (putpkt): Ditto. |
| * dcache.c (dcache_peek): Ditto. |
| * dcache.c (dcache_poke): Ditto. |
| * m2-exp.y (yylex): Ditto. |
| * gnu-regex.c (re_match_2): Ditto. |
| * f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef |
| out unused macro definition and variables. |
| * inftarg.c (proc_wait): Move from main.c to here, and make static. |
| * valprint.c (val_print_string): Change bufsize from int to unsigned. |
| * main.c (wait.h): Include. |
| * top.c (command_line_input): Remove unused variable "c". |
| * f-typeprint.c (f_type_print_varspec_prefix): Add missing enum |
| value TYPE_CODE_TYPEDEF to switch statement. |
| (f_type_print_varspec_suffix): Add missing enum value |
| TYPE_CODE_TYPEDEF to switch statement. |
| * ch-exp.c (parse_primval): Add remaining enumeration values to |
| switch statement, with no specific action. |
| (ch_lex): Add LOC_UNRESOLVED in switch statement. |
| (pushback_token): Ifdef out, since code using it is ifdef'd out. |
| * stabsread.c (cleanup_undefined_types): Remove unused label |
| "badtype". |
| * objfiles.h (print_symbol_bcache_statistics): Add prototype. |
| * maint.c (objfiles.h): Include. |
| (maintenance_print_statistics): Remove unused variable "temp". |
| * minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove |
| unused variable "found_file_symbol". |
| * m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch. |
| * language.c (lang_bool_type): Use existing function local type |
| variable rather than create block local variables. |
| * solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS. |
| * infptrace.c (wait.h, command.h): Include. |
| * ser-tcp.c (gdb_string.h): Include |
| * i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR. |
| (i386_get_frame_setup): Change "pc" from int to CORE_ADDR. |
| * command.c (complete_on_enum): Make assignment used as truth value |
| explictly check against NULL. |
| (wait.h): Include. |
| * infrun.c (wait_for_inferior): Ifdef out prologue_pc since code |
| that uses it is ifdef'd out. |
| * parser-defs.h: Add prototype for write_dollar_variable. |
| * infrun.c: Add prototype for write_pc_pid. |
| * breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs. |
| * symmisc.c (bcache.h): Include. |
| * bcache.h: Add prototype for print_bcache_statistics. |
| * symfile.c: Include <time.h>. |
| * printcmd.c (print_scalar_formatted): Change len to unsigned int. |
| * valarith.c (value_equal): Cast result of TYPE_LENGTH to int. |
| * valarith.c (value_binop): Change result_len, promoted_len1, |
| and promoted_len2 to unsigned int. |
| * valarith.c (value_subscripted_rvalue): Change elt_offs and |
| elt_size to unsigned int. |
| * valops.c (value_array): Change typelength to unsigned int. |
| (destructor_name_p): Change len to unsigned int. |
| * scm-lang.h (scm_parse): Add prototype for scm_unpack. |
| * symfile.c (decrement_reading_symtab): Change return type to void. |
| * valarith.c (value_subscript): Remove unused variable "word". |
| (value_subscript): Remove unused variable "tint". |
| * valops.c (auto_abandon): Ifdef out, since code using it is also |
| ifdef'd out. |
| * eval.c (init_array_element): Remove unused variable "val". |
| * Makefile.in (values.o): Depends on scm-lang.h. |
| (command.o): Depends upon wait_h. |
| (ser-tcp.o): Depends upon gdb_string.h. |
| (infptrace.o): Depends upon wait_h and command_h. |
| (maint.o): Depends on objfiles.h and symfile.h. |
| * values.c (allocate_repeat_value): Remove unused variable |
| "element_type". |
| (scm-lang.h): Include. |
| * breakpoint.c (create_longjmp_breakpoint): Enclose in |
| GET_LONGJMP_TARGET define, unused otherwise. |
| * config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint, |
| i386_remove_watchpoint and i386_stopped_by_watchpoint. |
| |
| Thu Mar 28 12:53:19 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * configure.in (sparc64-*-solaris2*): Delete. |
| Stick with sparc-*-solaris2*. |
| * configure: Regenerated. |
| |
| Thu Mar 28 06:51:26 1996 Fred Fish <fnf@cygnus.com> |
| |
| * valops.c (value_assign): Make copy of internal variable value |
| before returning it as a new value, since it is owned by the |
| internal variable and will be freed along with it. |
| |
| Wed Mar 27 08:36:17 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * From Peter Schauer. |
| * breakpoint.c (breakpoint_re_set_one): Keep temporary |
| breakpoints bp_until, bp_finish, bp_watchpoint_cope, bp_call_dummy |
| and bp_step_resume in case breakpoint_re_set_one is called due |
| to a step over a dlopen call. |
| * infrun.c (wait_for_inferior): Always remove breakpoints from |
| inferior in BPSTAT_WHAT_CHECK_SHLIBS case. |
| |
| Tue Mar 26 13:15:32 1996 Fred Fish <fnf@cygnus.com> |
| |
| * config/mips/tm-mips.h (COERCE_FLOAT_TO_DOUBLE): Only prefer |
| non-prototyped case over prototyped case for C. |
| * config/pa/tm-hppa.h (COERCE_FLOAT_TO_DOUBLE): Ditto. |
| |
| Sat Mar 23 17:24:28 1996 Fred Fish <fnf@cygnus.com> |
| |
| * os9kread.c (os9k_process_one_symbol): Note nonportable |
| assumption that an int can hold a char *. |
| |
| * bcache.h (struct hashlink): Wrap data[] inside union with |
| double to force longest alignment. |
| (BCACHE_DATA): New macro to access data[]. |
| (BCACHE_ALIGNMENT): New macro to get offset to data[]. |
| * bcache.c (lookup_cache, bcache): Use BCACHE_DATA to get |
| address of cached data. Use BCACHE_ALIGNMENT to compute |
| amount of space to allocate for each hashlink struct. |
| |
| Sat Mar 23 12:14:02 1996 Fred Fish <fnf@cygnus.com> |
| |
| * ch-lang.c (evaluate_subexp_chill): Fix typo. |
| |
| Thu Mar 21 08:27:19 1996 Fred Fish <fnf@cygnus.com> |
| |
| * Makefile.in (VERSION): Bump version to 4.15.3 |
| |
| Thu Mar 21 10:56:41 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * config.in: Rename from config.h.in. |
| * configure.in: Call AC_CONFIG_HEADER with config.h:config.in. |
| Change CONFIG_HEADERS test in AC_OUTPUT accordingly. |
| * configure: Rebuild. |
| * Makefile.in (stamp-h): Depend upon config.in, not config.h.in. |
| Set CONFIG_HEADERS to config.h:config.in. |
| |
| Tue Mar 19 12:47:51 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * partial-stab.h (case N_ENDM): Finish current partial symbol |
| table for Solaris 2 cc. |
| |
| Tue Mar 19 10:39:15 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * rs6000-nat.c (exec_one_dummy_insn): Don't clobber the |
| PC in the registers array. From Peter Schauer. |
| |
| Mon Mar 18 13:47:09 1996 Fred Fish <fnf@cygnus.com> |
| |
| * symfile.c (reread_symbols): Reinitialize bcache struct |
| members to zero using memset. Also use memset to reinit |
| global_psymbols and static_psymbols, rather than explicitly |
| resetting each structure member. |
| |
| Sat Mar 16 19:47:36 1996 Fred Fish <fnf@cygnus.com> |
| |
| * configure.in: Add fragment to create stamp-h. |
| |
| From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE> |
| * configure.in (AC_CHECK_HEADERS): Check for link.h. |
| * configure: Regenerate with autoconf. |
| * config.h.in: Regenerate with autoheader. |
| * config/i386/nm-linux.h: Include solib.h only if HAVE_LINK_H |
| is defined. |
| * solib.c: Exclude most of the code if HAVE_LINK_H is not defined. |
| * config/i386/linux.mh: Reinstate XM_CLIBS, it is needed for |
| older a.out based systems. |
| |
| Sat Mar 16 16:45:43 1996 Fred Fish <fnf@cygnus.com> |
| |
| * config.h.in: New file. |
| * acconfig.h: New file, for autoheader. |
| * configure.in (AC_CONFIG_HEADER): Add, generate config.h. |
| * configure: Regenerate. |
| * Makefile.in (defs_h): Add config.h |
| (distclean): Remove config.h and stamp-h during distclean. |
| (config.h, stamp-h): New targets to remake config.h when necessary. |
| * defs.h (config.h): Include before any other includes or defines. |
| * i386-tdep.c (gdb_string.h): Move include after include of defs.h. |
| * i386v4-nat.c (defs.h): Include before testing HAVE_SYS_PROCFS_H. |
| |
| Sat Mar 16 14:55:27 1996 Fred Fish <fnf@cygnus.com> |
| |
| From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE> |
| * Makefile.in (INSTALLED_LIBS): Make sure that @LIBS@ will not |
| result in an empty line, to work around a bug in native Ultrix 4.4 |
| and OSF/1-3.2C make. |
| |
| Sat Mar 16 13:33:17 1996 Fred Fish <fnf@cygnus.com> |
| |
| * configure.in: Add gdbserver to configdirs under linux. |
| * configure: Regenerate. |
| |
| Fri Mar 15 12:06:58 1996 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * config/i386/nm-nbsd.h (FLOAT_INFO): Comment out. |
| * config/i386/tm-nbsd.h (NUM_REGS): Define. |
| |
| Thu Mar 14 10:31:18 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * solib.c (solib_break_names): Add _r_debug_state for |
| vanilla SVR4 implementations. From Peter Schauer. |
| |
| Mon Mar 11 14:24:57 1996 Dawn Perchik <dawn@critters.cygnus.com> |
| |
| * mon960-rom.c: New file; support mon960 rom monitor on i960. |
| * monitor.c (monitor_debug): Change remotedebug to buffer strings. |
| * monitor.c (monitor_open): Add test for flag MO_NO_ECHO_ON_OPEN before |
| epecting prompt and echo during open. |
| * monitor.c (monitor_stop): Add test for flag MO_SEND_BREAK_ON_OPEN to |
| determine if break should be sent as stop command. |
| * monitor.h: Add flags MO_NO_ECHO_ON_OPEN and MO_SEND_BREAK_ON_OPEN. |
| * i960-tdep.c (mon960_frame_chain_valid): New function for getting |
| stack frame on mon960. |
| * Makefile.in: Add mon960 files. |
| * configure.in: Changed i960-*-coff* and i960-*-elf* to target mon960; |
| added i960-nindy-coff* and i960-nindy-elf* for target nindy. |
| * configure: Regenerated. |
| * config/i960/mon960.mt, config/i960/tm-mon960.h: New files; |
| support mon960 rom monitor on i960. |
| |
| Mon Mar 11 11:02:47 1996 Steve Chamberlain <sac@slash.cygnus.com> |
| |
| With Michael Snyder: |
| * i386-tdep.c (skip_trampoline_code): Fix strncmp length. |
| * win32-nat.c (CHECK, DEBUG*, debug_*): New. |
| (handle_load_dll): Don't reload symbols. |
| (handle_exception): Use the DEBUG_* names. |
| (child_wait): Add DEBUG_* code. |
| (_initialize_inftarg): Add new commands to set debug_ names. |
| |
| Mon Mar 11 09:19:58 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * From Peter Schauer: |
| * breakpoint.c (insert_breakpoints): Use ALL_BREAKPOINTS_SAFE. |
| (bpstat_stop_status): Likewise. |
| (remove_solib_event_breakpoints): Likewise. |
| (clear_momentary_breakpoints): Likewise. |
| (re_enable_breakpoints_in_shlibs): Don't reenable a breakpoint |
| if we still can't read the memory for that breakpoint. |
| (mention): Add bp_shlib_event case to keep gcc quiet. |
| |
| Fri Mar 8 12:08:12 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * breakpoint.h (enum enable): New enum shlib_disabled for |
| shared library breakpoints that have been temporarily disabled. |
| * breakpoint.c: Handle temporarily disabled shared library |
| breakpoints like disabled breakpoints in most places. |
| (insert_breakpoints): Use shlib_disabled to indicate |
| that an unsettable breakpoint is only temporarily disabled. |
| (re_enable_breakpoints_in_shlibs): New function. |
| * corelow.c (solib_add_stub): After adding shared libraries, |
| try to reenable any temporarily disabled breakpoints. |
| * infcmd.c (attach_command): Likewise. |
| * infrun.c (wait_for_inferior): Likewise. |
| |
| Fri Mar 8 11:41:25 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * defs.h (extract_long_unsigned_integer): Declare. |
| * findvar.c (extract_long_unsigned_integer): New function. |
| * printcmd.c (print_scalar_formatted): Use it. |
| * valprint.c (val_print_type_code_int): Likewise. |
| |
| Thu Mar 7 17:40:50 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * infcmd.c (do_registers_info): Ignore anonymous registers. |
| * sh-tdep.c (set processor): New command to set specific |
| processor type. |
| (sh_reg_names, sh3_reg_names): Arrays of register names for |
| SH and SH3 processors. |
| (sh_set_processor_type): New function. |
| * sh3-rom.c (sh3_open): Call it. |
| (sh3_regname): Add names of all the bank registers. |
| (sh3_supply_register): Clean up formatting. |
| * config/sh/tm-sh.h (NUM_REGS, NUM_REALREGS): Increase to include |
| bank registers. |
| (REGISTER_NAMES): Add names of bank registers. |
| (FP15_REGNUM): Define. |
| (REGISTER_VIRTUAL_TYPE): Use it. |
| * monitor.c: Clean up some comments. |
| |
| Thu Mar 7 12:09:51 1996 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * i386b-nat.c: Revert part of Mar 5 change. FreeBSD collapsed the |
| s* and t* symbols too. |
| |
| Thu Mar 7 15:18:51 1996 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * symfile.c (generic_load): Avoid division by zero. |
| |
| Wed Mar 6 17:57:59 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * breakpoint.c (bfd_lookup_symbol): Provide for all SVR4 systems, |
| not just those with HANDLE_SVR4_EXEC_EMULATORS. |
| |
| From Peter Schauer: |
| * breakpoint.c (internal_breakpoint_number): Move to file scope. |
| (create_solib_event_breakpoint): Use an internal breakpoint number. |
| |
| Wed Mar 6 00:32:44 1996 Wilfried Moser <moser@rtl.cygnus.com> |
| |
| * valarith.c (value_in): Change builtin_type_chill_bool to |
| LA_BOOL_TYPE. |
| |
| Tue Mar 5 23:48:36 1996 Wilfried Moser <moser@rtl.cygnus.com> |
| |
| * ch-exp.c (parse_primval): Handle CARD, MAX, MIN. |
| (match_string_literal): Handle control sequence. |
| (match_character_literal): Deto. |
| |
| * ch-lang.c (chill_printchar): Change formating of nonprintable |
| characters from C'xx' to ^(num). |
| (chill_printstr): Deto. |
| (value_chill_card, value_chill_max_min): New functions to process |
| Chill's CARD, MAX, MIN. |
| (evaluate_subexp_chill): Process UNOP_CARD, UNOP_CHMAX, UNOP_CHMIN. |
| |
| * expression.h (exp_opcode): Add UNOP_CARD, UNOP_CHMAX, UNOP_CHMIN |
| for Chill's CARD, MAX, MIN. |
| |
| * valarith.c (value_in): Add processing of TYPE_CODE_RANGE |
| and change return type from builtin_type_int to |
| builtin_type_chill_bool. |
| |
| Tue Mar 5 18:54:04 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * config/nm-nbsd.h (link_object, lo_name, etc): Move to here |
| from config/nm-nbsd.h. |
| * config/sparc/nm-nbsd.h (regs, fp_status, etc): Move to here |
| from config/sparc/tm-nbsd.h. |
| |
| * config/m68k/nm-hp300hpux.h (FIVE_ARG_PTRACE): Define here |
| instead of in config/m68k/xm-hp300hpux.h. |
| |
| Tue Mar 5 12:05:35 1996 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * i386b-nat.c, m68knbsd-nat.c (fetch_core_registers): Provide |
| implementation for NetBSD systems. |
| |
| Mon Mar 4 23:44:16 1996 Per Bothner <bothner@kalessin.cygnus.com> |
| |
| * valarith.c (binop_user_defined_p): Return 0 for BINOP_CONCAT. |
| (value_concat): Handle varying strings (add COERCE_VARYING_ARRAY). |
| |
| * ch-lang.c (evaluate_subexp_chill case MULTI_SUBSCRIPT): Error |
| if "function" is pointer to non-function. |
| |
| Mon Mar 4 17:47:03 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * top.c (print_gdb_version): Update copyright year. |
| |
| Mon Mar 4 14:44:54 1996 Jeffrey A Law (law@cygnus.com) |
| |
| From Peter Schauer: |
| * infrun.c (wait_for_inferior): Remove breakpoints and |
| switch terminal settings before calling SOLIB_ADD. |
| * solib.c (enable_break, SVR4 variant): Don't map in symbols |
| for the dynamic linker, the namespace pollution causes real |
| problems. |
| |
| Sun Mar 3 17:18:57 1996 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * remote-mips.c (common_breakpoint): Explicitly terminate the |
| returned buffer. |
| |
| Wed Feb 28 22:32:18 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| From Wilfried Moser <wilfried.moser@aut.alcatel.at>: |
| * remote.c (remote_detach): Send a command 'D' to the target |
| when detaching, update the function's comments. |
| |
| Thu Jun 6 16:11:38 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.c (thread_cmd_list): New declaration. |
| (parse_int_arg): New function. |
| |
| Wed Jun 5 17:28:04 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.h (struct proc): Add DETACH_SC field. |
| * gnu-nat.c (make_proc): Set DETACH_SC. |
| (struct inf): Add DETACH_SC & DEFAULT_THREAD_DETACH_SC fields. |
| (make_inf): Set DETACH_SC & DEFAULT_THREAD_DETACH_SC fields. |
| (add_thread_commands): Add set/show for detach-suspend-count. |
| Add takeover-suspend-count cmd. |
| (inf_detach): Set suspend counts to the detach SC, not 0. |
| (set_thread_detach_sc_cmd, show_thread_detach_sc_cmd, |
| set_task_detach_sc_cmd, show_task_detach_sc_cmd, |
| set_thread_default_thread_detach_sc_cmd, |
| show_thread_default_thread_detach_sc_cmd): New functions. |
| (show_task_cmd): Also show detach-suspend-count values. |
| (thread_takeover_sc_cmd): New function. |
| |
| Fri May 31 16:49:24 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.c (show_thread_run_cmd): Actually print state. |
| |
| Thu May 30 10:47:56 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.c (inf_signal): Make unforwardable exceptions an error. |
| |
| Tue May 28 17:06:36 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.c (inf_validate_stopped): proc_getprocinfo takes a |
| pointer to the flags now, not the flags themselves. |
| |
| Mon May 27 13:31:17 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.c (gnu_wait): Print debugging msgs for pending execs. |
| (gnu_create_inferior): Check return from ptrace. |
| |
| Sun May 26 16:56:35 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.h (struct proc): Add DEAD field. |
| * gnu-nat.c (make_proc): Initialize DEAD. |
| (inf_set_traced, inf_validate_task_sc, inf_validate_procs: Frob it. |
| (gnu_wait): Only abort for 0 threads if the task isn't dead. |
| |
| Sat May 25 17:06:05 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.c (inf_signal): Pass SIGCODE when posting a signal. |
| |
| Wed May 22 18:44:28 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.c (S_proc_wait_reply): Add SIGCODE argument. |
| (inf_set_traced): Only give no-signal-thread error message if |
| turning *on* tracing. |
| |
| Wed May 15 13:03:16 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.c (inf_validate_procs): If INF has no threads, always |
| set inf->threads_up_to_date to 0. |
| (inf_signal): Pass in new SIGCODE argument to msg_sig_post_untraced. |
| (gnu_wait): Pass in new TIMEOUT arg to interrupt_operation. |
| (proc_update_sc): Cast thread state arg to thread_set_state. |
| (proc_get_state): Cast thread state arg to thread_get_state. |
| (inf_validate_task_sc): Cast task_basic_info arg to task_info. |
| * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Call |
| inf_update_procs before we lookup the thread. |
| * config/i386/i386gnu.mh (MH_CFLAGS): New variable. |
| |
| Tue May 7 17:52:33 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.c (gnu_kill_inferior): Use inf_set_task to clear the task. |
| |
| Mon May 6 19:06:49 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.c (inf_set_traced): Use msg_set_init_int with |
| INIT_TRACEMASK instead of setting the exec flags. |
| |
| Fri May 3 19:10:57 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.c (inf_validate_procs): Don't clear INF->task if we find |
| the task's died, so others have a chance at it. |
| (gnu_resume): When single-stepping a single thread, given an error |
| if there is no such thread. When single-stepping one but running |
| the others, just given a warning and still run all the threads. |
| (gnu_wait): If there seem to be no threads, look harder, and |
| signal an error if there really aren't any. |
| (gnu_attach): Reset thread numbering to 0. |
| |
| * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Give |
| thread name in warning messages. |
| |
| * gnu-nat.c (active_inf): New function. |
| (show_sig_thread_cmd, show_stopped_cmd): Use it. |
| (info_port_rights, info_send_rights_cmd, info_port_sets_cmd, |
| info_recv_rights_cmd, info_port_rights_cmd, info_port_rights_cmd): |
| New functions. |
| (add_task_commands): Add new port-right info commands. |
| |
| Fri Apr 26 20:42:16 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.c (gnu_wait): Instead of _hurd_intr_rpc_mach_msg, just |
| use mach_msg with MACH_RCV_INTERRUPT. |
| (set_noninvasive_cmd): New function. |
| (add_task_commands): Add command entry for `set noninvasive'. |
| |
| Mon Mar 4 14:12:02 1996 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.c (gnu_read_inferior): Use hurd_safe_memmove, not safe_bcopy. |
| (safe_bcopy): Function removed. |
| |
| Mon Dec 4 14:18:26 1995 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.c (proc_update_sc): Assert only threads can have state. |
| (make_proc): Initialize state_valid & state_changed fields. |
| |
| Tue Nov 28 17:51:21 1995 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * reply_mig_hack.awk: New file. |
| |
| Tue Nov 14 14:31:03 1995 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * breakpoint.c (breakpoint_1): Print breakpoint thread field. |
| |
| * lynx-nat.c (child_wait): Return TARGET_WAITKIND_SPURIOUS for new |
| threads. |
| |
| Mon Nov 13 18:30:53 1995 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * target.c (debug_to_check_threads): New function. |
| |
| * inflow.c (terminal_init_inferior_with_pgrp): New function. |
| (terminal_init_inferior): Call terminal_init_inferior_with_pgrp. |
| * inferior.h (terminal_init_inferior_with_pgrp): New declaration, |
| but only if PROCESS_GROUP_TYPE is defined. |
| |
| Mon Nov 6 16:42:09 1995 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * target.c (debug_to_thread_alive): Pass through the return value. |
| |
| Thu Nov 2 18:05:00 1995 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * target.c (signals, target_signal_from_host, target_signal_to_host): |
| Add mach exceptions. |
| * target.h (enum target_signal): Add mach exceptions. |
| |
| Mon Oct 30 16:41:04 1995 Miles Bader <miles@gnu.ai.mit.edu> |
| |
| * gnu-nat.c: New file: gnu native backend. |
|