| #=============================================================================== |
| # Setup Project |
| #=============================================================================== |
| |
| cmake_minimum_required(VERSION 3.4.3) |
| |
| if(POLICY CMP0042) |
| cmake_policy(SET CMP0042 NEW) # Set MACOSX_RPATH=YES by default |
| endif() |
| |
| if (CMAKE_SOURCE_DIR STREQUAL CMAKE_CURRENT_SOURCE_DIR) |
| project(libcxxabi) |
| |
| # Rely on llvm-config. |
| set(CONFIG_OUTPUT) |
| if (NOT LLVM_CONFIG_PATH) |
| find_program(LLVM_CONFIG_PATH "llvm-config") |
| endif() |
| if(DEFINED LLVM_PATH) |
| set(LLVM_INCLUDE_DIR ${LLVM_INCLUDE_DIR} CACHE PATH "Path to llvm/include") |
| set(LLVM_PATH ${LLVM_PATH} CACHE PATH "Path to LLVM source tree") |
| set(LLVM_MAIN_SRC_DIR ${LLVM_PATH}) |
| set(LLVM_CMAKE_PATH "${LLVM_PATH}/cmake/modules") |
| elseif(LLVM_CONFIG_PATH) |
| message(STATUS "Found LLVM_CONFIG_PATH as ${LLVM_CONFIG_PATH}") |
| set(CONFIG_COMMAND ${LLVM_CONFIG_PATH} |
| "--includedir" |
| "--prefix" |
| "--src-root") |
| execute_process( |
| COMMAND ${CONFIG_COMMAND} |
| RESULT_VARIABLE HAD_ERROR |
| OUTPUT_VARIABLE CONFIG_OUTPUT |
| ) |
| if(NOT HAD_ERROR) |
| string(REGEX REPLACE |
| "[ \t]*[\r\n]+[ \t]*" ";" |
| CONFIG_OUTPUT ${CONFIG_OUTPUT}) |
| else() |
| string(REPLACE ";" " " CONFIG_COMMAND_STR "${CONFIG_COMMAND}") |
| message(STATUS "${CONFIG_COMMAND_STR}") |
| message(FATAL_ERROR "llvm-config failed with status ${HAD_ERROR}") |
| endif() |
| |
| list(GET CONFIG_OUTPUT 0 INCLUDE_DIR) |
| list(GET CONFIG_OUTPUT 1 LLVM_OBJ_ROOT) |
| list(GET CONFIG_OUTPUT 2 MAIN_SRC_DIR) |
| |
| set(LLVM_INCLUDE_DIR ${INCLUDE_DIR} CACHE PATH "Path to llvm/include") |
| set(LLVM_BINARY_DIR ${LLVM_OBJ_ROOT} CACHE PATH "Path to LLVM build tree") |
| set(LLVM_MAIN_SRC_DIR ${MAIN_SRC_DIR} CACHE PATH "Path to LLVM source tree") |
| set(LLVM_LIT_PATH "${LLVM_PATH}/utils/lit/lit.py") |
| |
| # --cmakedir is supported since llvm r291218 (4.0 release) |
| execute_process( |
| COMMAND ${LLVM_CONFIG_PATH} --cmakedir |
| RESULT_VARIABLE HAD_ERROR |
| OUTPUT_VARIABLE CONFIG_OUTPUT) |
| if(NOT HAD_ERROR) |
| string(STRIP "${CONFIG_OUTPUT}" LLVM_CMAKE_PATH) |
| else() |
| set(LLVM_CMAKE_PATH |
| "${LLVM_BINARY_DIR}/lib${LLVM_LIBDIR_SUFFIX}/cmake/llvm") |
| endif() |
| else() |
| message(FATAL_ERROR "llvm-config not found and LLVM_MAIN_SRC_DIR not defined. " |
| "Reconfigure with -DLLVM_CONFIG_PATH=path/to/llvm-config " |
| "or -DLLVM_PATH=path/to/llvm-source-root.") |
| endif() |
| |
| if(EXISTS ${LLVM_CMAKE_PATH}) |
| list(APPEND CMAKE_MODULE_PATH "${LLVM_CMAKE_PATH}") |
| include("${LLVM_CMAKE_PATH}/AddLLVM.cmake") |
| include("${LLVM_CMAKE_PATH}/HandleLLVMOptions.cmake") |
| else() |
| message(FATAL_ERROR "Not found: ${LLVM_CMAKE_PATH}") |
| endif() |
| |
| set(PACKAGE_NAME libcxxabi) |
| set(PACKAGE_VERSION 4.0.0) |
| set(PACKAGE_STRING "${PACKAGE_NAME} ${PACKAGE_VERSION}") |
| set(PACKAGE_BUGREPORT "llvm-bugs@lists.llvm.org") |
| |
| if (NOT DEFINED LLVM_INCLUDE_TESTS) |
| set(LLVM_INCLUDE_TESTS ON) |
| endif() |
| |
| if(EXISTS ${LLVM_MAIN_SRC_DIR}/utils/lit/lit.py) |
| set(LLVM_LIT ${LLVM_MAIN_SRC_DIR}/utils/lit/lit.py) |
| else() |
| # Seek installed Lit. |
| find_program(LLVM_LIT "lit.py" ${LLVM_MAIN_SRC_DIR}/utils/lit |
| DOC "Path to lit.py") |
| endif() |
| |
| if(LLVM_LIT) |
| # Define the default arguments to use with 'lit', and an option for the user |
| # to override. |
| set(LIT_ARGS_DEFAULT "-sv") |
| if (MSVC OR XCODE) |
| set(LIT_ARGS_DEFAULT "${LIT_ARGS_DEFAULT} --no-progress-bar") |
| endif() |
| set(LLVM_LIT_ARGS "${LIT_ARGS_DEFAULT}" CACHE STRING "Default options for lit") |
| |
| # On Win32 hosts, provide an option to specify the path to the GnuWin32 tools. |
| if( WIN32 AND NOT CYGWIN ) |
| set(LLVM_LIT_TOOLS_DIR "" CACHE PATH "Path to GnuWin32 tools") |
| endif() |
| else() |
| set(LLVM_INCLUDE_TESTS OFF) |
| endif() |
| |
| set(LIBCXXABI_LIBDIR_SUFFIX "${LLVM_LIBDIR_SUFFIX}" CACHE STRING |
| "Define suffix of library directory name (32/64)") |
| |
| set(LIBCXXABI_STANDALONE_BUILD 1) |
| else() |
| set(LLVM_MAIN_SRC_DIR "${CMAKE_SOURCE_DIR}" CACHE PATH "Path to LLVM source tree") |
| set(LLVM_LIT "${CMAKE_SOURCE_DIR}/utils/lit/lit.py") |
| set(LIBCXXABI_LIBDIR_SUFFIX ${LLVM_LIBDIR_SUFFIX}) |
| endif() |
| |
| #=============================================================================== |
| # Setup CMake Options |
| #=============================================================================== |
| |
| # Define options. |
| option(LIBCXXABI_ENABLE_EXCEPTIONS "Use exceptions." ON) |
| option(LIBCXXABI_ENABLE_ASSERTIONS "Enable assertions independent of build mode." ON) |
| option(LIBCXXABI_ENABLE_PEDANTIC "Compile with pedantic enabled." ON) |
| option(LIBCXXABI_ENABLE_WERROR "Fail and stop if a warning is triggered." OFF) |
| option(LIBCXXABI_USE_LLVM_UNWINDER "Build and use the LLVM unwinder." OFF) |
| option(LIBCXXABI_USE_COMPILER_RT "Use compiler-rt instead of libgcc" OFF) |
| option(LIBCXXABI_ENABLE_THREADS "Build with threads enabled" ON) |
| option(LIBCXXABI_HAS_PTHREAD_API "Ignore auto-detection and force use of pthread API" OFF) |
| option(LIBCXXABI_HAS_EXTERNAL_THREAD_API |
| "Build libc++abi with an externalized threading API. |
| This option may only be set to ON when LIBCXXABI_ENABLE_THREADS=ON." OFF) |
| option(LIBCXXABI_BUILD_EXTERNAL_THREAD_LIBRARY |
| "Build libc++abi with an externalized threading library. |
| This option may only be set to ON when LIBCXXABI_ENABLE_THREADS=ON" OFF) |
| option(LIBCXXABI_BUILD_32_BITS "Build 32 bit libc++abi." ${LLVM_BUILD_32_BITS}) |
| option(LIBCXXABI_INCLUDE_TESTS "Generate build targets for the libc++abi unit tests." ${LLVM_INCLUDE_TESTS}) |
| set(LIBCXXABI_TARGET_TRIPLE "" CACHE STRING "Target triple for cross compiling.") |
| set(LIBCXXABI_GCC_TOOLCHAIN "" CACHE PATH "GCC toolchain for cross compiling.") |
| set(LIBCXXABI_SYSROOT "" CACHE PATH "Sysroot for cross compiling.") |
| set(LIBCXXABI_LIBCXX_LIBRARY_PATH "" CACHE PATH "The path to libc++ library.") |
| |
| # Default to building a shared library so that the default options still test |
| # the libc++abi that is being built. There are two problems with testing a |
| # static libc++abi. In the case of a standalone build, the tests will link the |
| # system's libc++, which might not have been built against our libc++abi. In the |
| # case of an in tree build, libc++ will prefer a dynamic libc++abi from the |
| # system over a static libc++abi from the output directory. |
| option(LIBCXXABI_ENABLE_SHARED "Build libc++abi as a shared library." ON) |
| option(LIBCXXABI_ENABLE_STATIC "Build libc++abi as a static library." ON) |
| |
| if (NOT LIBCXXABI_ENABLE_SHARED AND NOT LIBCXXABI_ENABLE_STATIC) |
| message(FATAL_ERROR "libc++abi must be built as either a shared or static library.") |
| endif() |
| |
| if (LLVM_EXTERNAL_LIBCXX_SOURCE_DIR) |
| set(LIBCXXABI_LIBCXX_SRC_DIRS ${LLVM_EXTERNAL_LIBCXX_SOURCE_DIR}) |
| else() |
| set(LIBCXXABI_LIBCXX_SRC_DIRS |
| "${LLVM_MAIN_SRC_DIR}/projects/libcxx" |
| "${LLVM_MAIN_SRC_DIR}/runtimes/libcxx" |
| ) |
| endif() |
| |
| set(LIBCXXABI_LIBCXX_INCLUDE_DIRS "") |
| foreach(dir ${LIBCXXABI_LIBCXX_SRC_DIRS}) |
| list(APPEND LIBCXXABI_LIBCXX_INCLUDE_DIRS "${dir}/include") |
| endforeach() |
| |
| find_path( |
| LIBCXXABI_LIBCXX_INCLUDES |
| vector |
| PATHS ${LIBCXXABI_LIBCXX_INCLUDES} |
| ${LIBCXXABI_LIBCXX_PATH}/include |
| ${CMAKE_BINARY_DIR}/${LIBCXXABI_LIBCXX_INCLUDES} |
| ${LIBCXXABI_LIBCXX_INCLUDE_DIRS} |
| ${LLVM_INCLUDE_DIR}/c++/v1 |
| ) |
| |
| set(LIBCXXABI_LIBCXX_INCLUDES "${LIBCXXABI_LIBCXX_INCLUDES}" CACHE PATH |
| "Specify path to libc++ includes." FORCE) |
| |
| find_path( |
| LIBCXXABI_LIBCXX_PATH |
| test/libcxx/__init__.py |
| PATHS ${LIBCXXABI_LIBCXX_PATH} |
| ${LIBCXXABI_LIBCXX_INCLUDES}/../ |
| ${LIBCXXABI_LIBCXX_SRC_DIRS} |
| NO_DEFAULT_PATH |
| ) |
| |
| if (LIBCXXABI_LIBCXX_PATH STREQUAL "LIBCXXABI_LIBCXX_PATH-NOTFOUND") |
| message(WARNING "LIBCXXABI_LIBCXX_PATH was not specified and couldn't be infered.") |
| set(LIBCXXABI_LIBCXX_PATH "") |
| endif() |
| |
| set(LIBCXXABI_LIBCXX_PATH "${LIBCXXABI_LIBCXX_PATH}" CACHE PATH |
| "Specify path to libc++ source." FORCE) |
| |
| #=============================================================================== |
| # Configure System |
| #=============================================================================== |
| |
| # Add path for custom modules |
| set(CMAKE_MODULE_PATH |
| "${CMAKE_CURRENT_SOURCE_DIR}/cmake" |
| "${CMAKE_CURRENT_SOURCE_DIR}/cmake/Modules" |
| ${CMAKE_MODULE_PATH} |
| ) |
| |
| set(LIBCXXABI_COMPILER ${CMAKE_CXX_COMPILER}) |
| set(LIBCXXABI_SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}) |
| set(LIBCXXABI_BINARY_DIR ${CMAKE_CURRENT_BINARY_DIR}) |
| set(LIBCXXABI_LIBRARY_DIR ${CMAKE_BINARY_DIR}/lib${LIBCXXABI_LIBDIR_SUFFIX}) |
| |
| set(CMAKE_ARCHIVE_OUTPUT_DIRECTORY ${LIBCXXABI_LIBRARY_DIR}) |
| set(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${LIBCXXABI_LIBRARY_DIR}) |
| |
| # By default, for non-standalone builds, libcxx and libcxxabi share a library |
| # directory. |
| if (NOT LIBCXXABI_LIBCXX_LIBRARY_PATH) |
| set(LIBCXXABI_LIBCXX_LIBRARY_PATH "${LIBCXXABI_LIBRARY_DIR}" CACHE PATH |
| "The path to libc++ library.") |
| endif() |
| |
| # Check that we can build with 32 bits if requested. |
| if (CMAKE_SIZEOF_VOID_P EQUAL 8 AND NOT WIN32) |
| if (LIBCXXABI_BUILD_32_BITS AND NOT LLVM_BUILD_32_BITS) # Don't duplicate the output from LLVM |
| message(STATUS "Building 32 bits executables and libraries.") |
| endif() |
| elseif(LIBCXXABI_BUILD_32_BITS) |
| message(FATAL_ERROR "LIBCXXABI_BUILD_32_BITS=ON is not supported on this platform.") |
| endif() |
| |
| #=============================================================================== |
| # Setup Compiler Flags |
| #=============================================================================== |
| |
| # Get required flags. |
| macro(append_if list condition var) |
| if (${condition}) |
| list(APPEND ${list} ${var}) |
| endif() |
| endmacro() |
| |
| macro(add_target_flags_if condition var) |
| if (${condition}) |
| set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${var}") |
| set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${var}") |
| list(APPEND LIBCXXABI_LINK_FLAGS ${var}) |
| endif() |
| endmacro() |
| |
| set(LIBCXXABI_C_FLAGS "") |
| set(LIBCXXABI_CXX_FLAGS "") |
| set(LIBCXXABI_COMPILE_FLAGS "") |
| set(LIBCXXABI_LINK_FLAGS "") |
| |
| # Configure target flags |
| add_target_flags_if(LIBCXXABI_BUILD_32_BITS "-m32") |
| add_target_flags_if(LIBCXXABI_TARGET_TRIPLE |
| "-target ${LIBCXXABI_TARGET_TRIPLE}") |
| add_target_flags_if(LIBCXXABI_GCC_TOOLCHAIN |
| "-gcc-toolchain ${LIBCXXABI_GCC_TOOLCHAIN}") |
| add_target_flags_if(LIBCXXABI_SYSROOT |
| "--sysroot=${LIBCXXABI_SYSROOT}") |
| |
| if (LIBCXXABI_TARGET_TRIPLE) |
| set(TARGET_TRIPLE "${LIBCXXABI_TARGET_TRIPLE}") |
| endif() |
| |
| # Configure compiler. Must happen after setting the target flags. |
| include(config-ix) |
| |
| if (LIBCXXABI_HAS_NOSTDINCXX_FLAG) |
| list(APPEND LIBCXXABI_COMPILE_FLAGS -nostdinc++) |
| # Remove -stdlib flags to prevent them from causing an unused flag warning. |
| string(REPLACE "-stdlib=libc++" "" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") |
| string(REPLACE "-stdlib=libstdc++" "" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") |
| endif() |
| |
| if (LIBCXXABI_USE_COMPILER_RT) |
| list(APPEND LIBCXXABI_LINK_FLAGS "-rtlib=compiler-rt") |
| endif() |
| |
| # Let the library headers know they are currently being used to build the |
| # library. |
| add_definitions(-D_LIBCXXABI_BUILDING_LIBRARY) |
| |
| # Disable DLL annotations on Windows for static builds. |
| if (WIN32 AND LIBCXXABI_ENABLE_STATIC AND NOT LIBCXXABI_ENABLE_SHARED) |
| add_definitions(-D_LIBCXXABI_DISABLE_DLL_IMPORT_EXPORT) |
| endif() |
| |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WERROR_FLAG -Werror=return-type) |
| |
| # Get warning flags |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_W_FLAG -W) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WALL_FLAG -Wall) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WCHAR_SUBSCRIPTS_FLAG -Wchar-subscripts) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WCONVERSION_FLAG -Wconversion) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WMISMATCHED_TAGS_FLAG -Wmismatched-tags) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WMISSING_BRACES_FLAG -Wmissing-braces) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WNEWLINE_EOF_FLAG -Wnewline-eof) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WNO_UNUSED_FUNCTION_FLAG -Wno-unused-function) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WSHADOW_FLAG -Wshadow) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WSHORTEN_64_TO_32_FLAG -Wshorten-64-to-32) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WSIGN_COMPARE_FLAG -Wsign-compare) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WSIGN_CONVERSION_FLAG -Wsign-conversion) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WSTRICT_ALIASING_FLAG -Wstrict-aliasing=2) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WSTRICT_OVERFLOW_FLAG -Wstrict-overflow=4) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WUNUSED_PARAMETER_FLAG -Wunused-parameter) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WUNUSED_VARIABLE_FLAG -Wunused-variable) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WWRITE_STRINGS_FLAG -Wwrite-strings) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WUNDEF_FLAG -Wundef) |
| |
| if (LIBCXXABI_ENABLE_WERROR) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WERROR_FLAG -Werror) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WX_FLAG -WX) |
| else() |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_WNO_ERROR_FLAG -Wno-error) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_NO_WX_FLAG -WX-) |
| endif() |
| if (LIBCXXABI_ENABLE_PEDANTIC) |
| append_if(LIBCXXABI_COMPILE_FLAGS LIBCXXABI_HAS_PEDANTIC_FLAG -pedantic) |
| endif() |
| |
| # Get feature flags. |
| append_if(LIBCXXABI_CXX_FLAGS LIBCXXABI_HAS_FSTRICT_ALIASING_FLAG -fstrict-aliasing) |
| |
| # Exceptions |
| if (LIBCXXABI_ENABLE_EXCEPTIONS) |
| # Catches C++ exceptions only and tells the compiler to assume that extern C |
| # functions never throw a C++ exception. |
| append_if(LIBCXXABI_CXX_FLAGS LIBCXXABI_HAS_EHSC_FLAG -EHsc) |
| append_if(LIBCXXABI_C_FLAGS LIBCXXABI_HAS_FUNWIND_TABLES -funwind-tables) |
| else() |
| add_definitions(-D_LIBCXXABI_NO_EXCEPTIONS) |
| append_if(LIBCXXABI_CXX_FLAGS LIBCXXABI_HAS_NO_EXCEPTIONS_FLAG -fno-exceptions) |
| append_if(LIBCXXABI_CXX_FLAGS LIBCXXABI_HAS_NO_EHS_FLAG -EHs-) |
| append_if(LIBCXXABI_CXX_FLAGS LIBCXXABI_HAS_NO_EHA_FLAG -EHa-) |
| endif() |
| |
| # Assert |
| string(TOUPPER "${CMAKE_BUILD_TYPE}" uppercase_CMAKE_BUILD_TYPE) |
| if (LIBCXXABI_ENABLE_ASSERTIONS) |
| # MSVC doesn't like _DEBUG on release builds. See PR 4379. |
| if (NOT MSVC) |
| list(APPEND LIBCXXABI_COMPILE_FLAGS -D_DEBUG) |
| endif() |
| # On Release builds cmake automatically defines NDEBUG, so we |
| # explicitly undefine it: |
| if (uppercase_CMAKE_BUILD_TYPE STREQUAL "RELEASE") |
| list(APPEND LIBCXXABI_COMPILE_FLAGS -UNDEBUG) |
| endif() |
| else() |
| if (NOT uppercase_CMAKE_BUILD_TYPE STREQUAL "RELEASE") |
| list(APPEND LIBCXXABI_COMPILE_FLAGS -DNDEBUG) |
| endif() |
| endif() |
| # Static library |
| if (NOT LIBCXXABI_ENABLE_SHARED) |
| list(APPEND LIBCXXABI_COMPILE_FLAGS -D_LIBCPP_BUILD_STATIC) |
| endif() |
| |
| # Threading |
| if (NOT LIBCXXABI_ENABLE_THREADS) |
| if (LIBCXXABI_HAS_PTHREAD_API) |
| message(FATAL_ERROR "LIBCXXABI_HAS_PTHREAD_API can only" |
| " be set to ON when LIBCXXABI_ENABLE_THREADS" |
| " is also set to ON.") |
| endif() |
| if (LIBCXXABI_HAS_EXTERNAL_THREAD_API) |
| message(FATAL_ERROR "LIBCXXABI_HAS_EXTERNAL_THREAD_API can only" |
| " be set to ON when LIBCXXABI_ENABLE_THREADS" |
| " is also set to ON.") |
| endif() |
| if (LIBCXXABI_BUILD_EXTERNAL_THREAD_LIBRARY) |
| message(FATAL_ERROR "LIBCXXABI_BUILD_EXTERNAL_THREAD_LIBRARY can only" |
| " be set to ON when LIBCXXABI_ENABLE_THREADS" |
| " is also set to ON.") |
| endif() |
| add_definitions(-D_LIBCXXABI_HAS_NO_THREADS) |
| endif() |
| |
| if (LIBCXXABI_HAS_EXTERNAL_THREAD_API) |
| if (LIBCXXABI_HAS_PTHREAD_API) |
| message(FATAL_ERROR "The options LIBCXXABI_HAS_EXTERNAL_THREAD_API" |
| " and LIBCXXABI_HAS_PTHREAD_API cannot be both" |
| " set to ON at the same time.") |
| endif() |
| if (LIBCXXABI_BUILD_EXTERNAL_THREAD_LIBRARY) |
| message(FATAL_ERROR "The options LIBCXXABI_BUILD_EXTERNAL_THREAD_LIBRARY" |
| " and LIBCXXABI_HAS_EXTERNAL_THREAD_API cannot be both" |
| " set to ON at the same time.") |
| endif() |
| endif() |
| |
| if (LIBCXXABI_BUILD_EXTERNAL_THREAD_LIBRARY AND LIBCXXABI_ENABLE_SHARED) |
| # Need to allow unresolved symbols if this is to work with shared library builds |
| if (APPLE) |
| add_link_flags("-undefined dynamic_lookup") |
| else() |
| # Relax this restriction from HandleLLVMOptions |
| string(REPLACE "-Wl,-z,defs" "" CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS}") |
| endif() |
| endif() |
| |
| if (LIBCXXABI_HAS_PTHREAD_API) |
| add_definitions(-D_LIBCPP_HAS_THREAD_API_PTHREAD) |
| endif() |
| |
| if (LIBCXXABI_HAS_EXTERNAL_THREAD_API) |
| add_definitions(-D_LIBCPP_HAS_THREAD_API_EXTERNAL) |
| endif() |
| |
| if (LIBCXXABI_BUILD_EXTERNAL_THREAD_LIBRARY) |
| add_definitions(-D_LIBCPP_HAS_THREAD_LIBRARY_EXTERNAL) |
| endif() |
| |
| if (MSVC) |
| add_definitions(-D_CRT_SECURE_NO_WARNINGS) |
| endif() |
| |
| # Define LIBCXXABI_USE_LLVM_UNWINDER for conditional compilation. |
| if (LIBCXXABI_USE_LLVM_UNWINDER) |
| add_definitions(-DLIBCXXABI_USE_LLVM_UNWINDER=1) |
| endif() |
| |
| string(REPLACE ";" " " LIBCXXABI_CXX_FLAGS "${LIBCXXABI_CXX_FLAGS}") |
| set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${LIBCXXABI_CXX_FLAGS}") |
| set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${LIBCXXABI_C_FLAGS}") |
| |
| #=============================================================================== |
| # Setup Source Code |
| #=============================================================================== |
| |
| set(LIBCXXABI_LIBUNWIND_INCLUDES "${LIBCXXABI_LIBUNWIND_INCLUDES}" CACHE PATH |
| "Specify path to libunwind includes." FORCE) |
| set(LIBCXXABI_LIBUNWIND_PATH "${LIBCXXABI_LIBUNWIND_PATH}" CACHE PATH |
| "Specify path to libunwind source." FORCE) |
| |
| include_directories(include) |
| if (LIBCXXABI_USE_LLVM_UNWINDER OR LLVM_NATIVE_ARCH MATCHES ARM) |
| find_path( |
| LIBCXXABI_LIBUNWIND_INCLUDES_INTERNAL |
| libunwind.h |
| PATHS ${LIBCXXABI_LIBUNWIND_INCLUDES} |
| ${LIBCXXABI_LIBUNWIND_PATH}/include |
| ${CMAKE_BINARY_DIR}/${LIBCXXABI_LIBUNWIND_INCLUDES} |
| ${LLVM_MAIN_SRC_DIR}/projects/libunwind/include |
| ${LLVM_MAIN_SRC_DIR}/runtimes/libunwind/include |
| NO_DEFAULT_PATH |
| ) |
| |
| find_path( |
| LIBCXXABI_LIBUNWIND_SOURCES |
| libunwind_ext.h |
| PATHS ${LIBCXXABI_LIBUNWIND_PATH}/src/ |
| ${LIBCXXABI_LIBUNWIND_INCLUDES}/../src/ |
| ${LLVM_MAIN_SRC_DIR}/projects/libunwind/src/ |
| ${LLVM_MAIN_SRC_DIR}/runtimes/libunwind/src/ |
| NO_DEFAULT_PATH |
| ) |
| |
| if (LIBCXXABI_LIBUNWIND_SOURCES STREQUAL "LIBCXXABI_LIBUNWIND_SOURCES-NOTFOUND") |
| message(WARNING "LIBCXXABI_LIBUNWIND_SOURCES was not specified and couldn't be infered.") |
| set(LIBCXXABI_LIBUNWIND_SOURCES "") |
| endif() |
| |
| include_directories("${LIBCXXABI_LIBUNWIND_INCLUDES_INTERNAL}") |
| include_directories("${LIBCXXABI_LIBUNWIND_SOURCES}") |
| endif() |
| |
| # Add source code. This also contains all of the logic for deciding linker flags |
| # soname, etc... |
| add_subdirectory(src) |
| |
| if (NOT LIBCXXABI_INCLUDE_TESTS OR (LIBCXXABI_STANDALONE_BUILD AND NOT LIBCXXABI_ENABLE_SHARED)) |
| # We can't reasonably test the system C++ library with a static libc++abi. |
| # We either need to be able to replace libc++abi at run time (with a shared |
| # libc++abi), or we need to be able to replace the C++ runtime (with a non- |
| # standalone build). |
| message(WARNING "The libc++abi tests aren't valid when libc++abi is built " |
| "standalone (i.e. outside of llvm/projects/libcxxabi ) and " |
| "is built without a shared library. Either build a shared " |
| "library, build libc++abi at the same time as you build " |
| "libc++, or do without testing. No check target will be " |
| "available!") |
| else() |
| add_subdirectory(test) |
| add_subdirectory(fuzz) |
| endif() |