blob: dc812fb4065f449c1b3db89e22baa360d367fed7 [file] [log] [blame]
; RUN: opt < %s -loop-unroll -S | FileCheck %s
;
; Verify that the unrolling pass removes existing unroll count metadata
; and adds a disable unrolling node after unrolling is complete.
target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
target triple = "x86_64-unknown-linux-gnu"
; #pragma clang loop vectorize(enable) unroll_count(4) vectorize_width(8)
;
; Unroll count metadata should be replaced with unroll(disable). Vectorize
; metadata should be untouched.
;
; CHECK-LABEL: @unroll_count_4(
; CHECK: br i1 {{.*}}, label {{.*}}, label {{.*}}, !llvm.loop ![[LOOP_1:.*]]
define void @unroll_count_4(i32* nocapture %a) {
entry:
br label %for.body
for.body: ; preds = %for.body, %entry
%indvars.iv = phi i64 [ 0, %entry ], [ %indvars.iv.next, %for.body ]
%arrayidx = getelementptr inbounds i32, i32* %a, i64 %indvars.iv
%0 = load i32, i32* %arrayidx, align 4
%inc = add nsw i32 %0, 1
store i32 %inc, i32* %arrayidx, align 4
%indvars.iv.next = add nuw nsw i64 %indvars.iv, 1
%exitcond = icmp eq i64 %indvars.iv.next, 64
br i1 %exitcond, label %for.end, label %for.body, !llvm.loop !1
for.end: ; preds = %for.body
ret void
}
!1 = !{!1, !2, !3, !4}
!2 = !{!"llvm.loop.vectorize.enable", i1 true}
!3 = !{!"llvm.loop.unroll.count", i32 4}
!4 = !{!"llvm.loop.vectorize.width", i32 8}
; #pragma clang loop unroll(full)
;
; An unroll disable metadata node is only added for the unroll count case.
; In this case, the loop has a full unroll metadata but can't be fully unrolled
; because the trip count is dynamic. The full unroll metadata should remain
; after unrolling.
;
; CHECK-LABEL: @unroll_full(
; CHECK: br i1 {{.*}}, label {{.*}}, label {{.*}}, !llvm.loop ![[LOOP_2:.*]]
define void @unroll_full(i32* nocapture %a, i32 %b) {
entry:
%cmp3 = icmp sgt i32 %b, 0
br i1 %cmp3, label %for.body, label %for.end, !llvm.loop !5
for.body: ; preds = %entry, %for.body
%indvars.iv = phi i64 [ %indvars.iv.next, %for.body ], [ 0, %entry ]
%arrayidx = getelementptr inbounds i32, i32* %a, i64 %indvars.iv
%0 = load i32, i32* %arrayidx, align 4
%inc = add nsw i32 %0, 1
store i32 %inc, i32* %arrayidx, align 4
%indvars.iv.next = add nuw nsw i64 %indvars.iv, 1
%lftr.wideiv = trunc i64 %indvars.iv.next to i32
%exitcond = icmp eq i32 %lftr.wideiv, %b
br i1 %exitcond, label %for.end, label %for.body, !llvm.loop !5
for.end: ; preds = %for.body, %entry
ret void
}
!5 = !{!5, !6}
!6 = !{!"llvm.loop.unroll.full"}
; #pragma clang loop unroll(disable)
;
; Unroll metadata should not change.
;
; CHECK-LABEL: @unroll_disable(
; CHECK: br i1 {{.*}}, label {{.*}}, label {{.*}}, !llvm.loop ![[LOOP_3:.*]]
define void @unroll_disable(i32* nocapture %a) {
entry:
br label %for.body
for.body: ; preds = %for.body, %entry
%indvars.iv = phi i64 [ 0, %entry ], [ %indvars.iv.next, %for.body ]
%arrayidx = getelementptr inbounds i32, i32* %a, i64 %indvars.iv
%0 = load i32, i32* %arrayidx, align 4
%inc = add nsw i32 %0, 1
store i32 %inc, i32* %arrayidx, align 4
%indvars.iv.next = add nuw nsw i64 %indvars.iv, 1
%exitcond = icmp eq i64 %indvars.iv.next, 64
br i1 %exitcond, label %for.end, label %for.body, !llvm.loop !7
for.end: ; preds = %for.body
ret void
}
!7 = !{!7, !8}
!8 = !{!"llvm.loop.unroll.disable"}
; This function contains two loops which share the same llvm.loop metadata node
; with an llvm.loop.unroll.count 2 hint. Both loops should be unrolled. This
; verifies that adding disable metadata to a loop after unrolling doesn't affect
; other loops which previously shared the same llvm.loop metadata.
;
; CHECK-LABEL: @shared_metadata(
; CHECK: store i32
; CHECK: store i32
; CHECK: br i1 {{.*}}, label {{.*}}, label {{.*}}, !llvm.loop ![[LOOP_4:.*]]
; CHECK: store i32
; CHECK: store i32
; CHECK: br i1 {{.*}}, label {{.*}}, label {{.*}}, !llvm.loop ![[LOOP_5:.*]]
define void @shared_metadata(i32* nocapture %List) #0 {
entry:
br label %for.body3
for.body3: ; preds = %for.body3, %entry
%indvars.iv = phi i64 [ 0, %entry ], [ %indvars.iv.next, %for.body3 ]
%arrayidx = getelementptr inbounds i32, i32* %List, i64 %indvars.iv
%0 = load i32, i32* %arrayidx, align 4
%add4 = add nsw i32 %0, 10
store i32 %add4, i32* %arrayidx, align 4
%indvars.iv.next = add nuw nsw i64 %indvars.iv, 1
%exitcond = icmp eq i64 %indvars.iv.next, 4
br i1 %exitcond, label %for.body3.1.preheader, label %for.body3, !llvm.loop !9
for.body3.1.preheader: ; preds = %for.body3
br label %for.body3.1
for.body3.1: ; preds = %for.body3.1.preheader, %for.body3.1
%indvars.iv.1 = phi i64 [ %1, %for.body3.1 ], [ 0, %for.body3.1.preheader ]
%1 = add nsw i64 %indvars.iv.1, 1
%arrayidx.1 = getelementptr inbounds i32, i32* %List, i64 %1
%2 = load i32, i32* %arrayidx.1, align 4
%add4.1 = add nsw i32 %2, 10
store i32 %add4.1, i32* %arrayidx.1, align 4
%exitcond.1 = icmp eq i64 %1, 4
br i1 %exitcond.1, label %for.inc5.1, label %for.body3.1, !llvm.loop !9
for.inc5.1: ; preds = %for.body3.1
ret void
}
!9 = !{!9, !10}
!10 = !{!"llvm.loop.unroll.count", i32 2}
; CHECK: ![[LOOP_1]] = distinct !{![[LOOP_1]], ![[VEC_ENABLE:.*]], ![[WIDTH_8:.*]], ![[UNROLL_DISABLE:.*]]}
; CHECK: ![[VEC_ENABLE]] = !{!"llvm.loop.vectorize.enable", i1 true}
; CHECK: ![[WIDTH_8]] = !{!"llvm.loop.vectorize.width", i32 8}
; CHECK: ![[UNROLL_DISABLE]] = !{!"llvm.loop.unroll.disable"}
; CHECK: ![[LOOP_2]] = distinct !{![[LOOP_2]], ![[UNROLL_FULL:.*]]}
; CHECK: ![[UNROLL_FULL]] = !{!"llvm.loop.unroll.full"}
; CHECK: ![[LOOP_3]] = distinct !{![[LOOP_3]], ![[UNROLL_DISABLE:.*]]}
; CHECK: ![[LOOP_4]] = distinct !{![[LOOP_4]], ![[UNROLL_DISABLE:.*]]}
; CHECK: ![[LOOP_5]] = distinct !{![[LOOP_5]], ![[UNROLL_DISABLE:.*]]}