test/Analysis/ScalarEvolution/no-wrap-add-exprs.ll

; RUN: opt -S -analyze -scalar-evolution < %s | FileCheck %s

!0 = !{i8 0, i8 127}

define void @f0(i8* %len_addr) {
; CHECK-LABEL: Classifying expressions for: @f0
 entry:
  %len = load i8, i8* %len_addr, !range !0
  %len_norange = load i8, i8* %len_addr
; CHECK:  %len = load i8, i8* %len_addr, !range !0
; CHECK-NEXT:  -->  %len U: [0,127) S: [0,127)
; CHECK:  %len_norange = load i8, i8* %len_addr
; CHECK-NEXT:  -->  %len_norange U: full-set S: full-set

  %t0 = add i8 %len, 1
  %t1 = add i8 %len, 2
; CHECK:  %t0 = add i8 %len, 1
; CHECK-NEXT:  -->  (1 + %len)<nuw><nsw> U: [1,-128) S: [1,-128)
; CHECK:  %t1 = add i8 %len, 2
; CHECK-NEXT:  -->  (2 + %len)<nuw> U: [2,-127) S: [2,-127)

  %t2 = sub i8 %len, 1
  %t3 = sub i8 %len, 2
; CHECK:  %t2 = sub i8 %len, 1
; CHECK-NEXT:  -->  (-1 + %len)<nsw> U: [-1,126) S: [-1,126)
; CHECK:  %t3 = sub i8 %len, 2
; CHECK-NEXT:  -->  (-2 + %len)<nsw> U: [-2,125) S: [-2,125)

  %q0 = add i8 %len_norange, 1
  %q1 = add i8 %len_norange, 2
; CHECK:  %q0 = add i8 %len_norange, 1
; CHECK-NEXT:  -->  (1 + %len_norange) U: full-set S: full-set
; CHECK:  %q1 = add i8 %len_norange, 2
; CHECK-NEXT:  -->  (2 + %len_norange) U: full-set S: full-set

  %q2 = sub i8 %len_norange, 1
  %q3 = sub i8 %len_norange, 2
; CHECK:  %q2 = sub i8 %len_norange, 1
; CHECK-NEXT:  -->  (-1 + %len_norange) U: full-set S: full-set
; CHECK:  %q3 = sub i8 %len_norange, 2
; CHECK-NEXT:  -->  (-2 + %len_norange) U: full-set S: full-set

  ret void
}

define void @f1(i8* %len_addr) {
; CHECK-LABEL: Classifying expressions for: @f1
 entry:
  %len = load i8, i8* %len_addr, !range !0
  %len_norange = load i8, i8* %len_addr
; CHECK:  %len = load i8, i8* %len_addr, !range !0
; CHECK-NEXT:  -->  %len U: [0,127) S: [0,127)
; CHECK:  %len_norange = load i8, i8* %len_addr
; CHECK-NEXT:  -->  %len_norange U: full-set S: full-set

  %t0 = add i8 %len, -1
  %t1 = add i8 %len, -2
; CHECK:  %t0 = add i8 %len, -1
; CHECK-NEXT:  -->  (-1 + %len)<nsw> U: [-1,126) S: [-1,126)
; CHECK:  %t1 = add i8 %len, -2
; CHECK-NEXT:  -->  (-2 + %len)<nsw> U: [-2,125) S: [-2,125)

  %t0.sext = sext i8 %t0 to i16
  %t1.sext = sext i8 %t1 to i16
; CHECK:  %t0.sext = sext i8 %t0 to i16
; CHECK-NEXT:  -->  (-1 + (zext i8 %len to i16))<nsw> U: [-1,126) S: [-1,126)
; CHECK:  %t1.sext = sext i8 %t1 to i16
; CHECK-NEXT:  -->  (-2 + (zext i8 %len to i16))<nsw> U: [-2,125) S: [-2,125)

  %q0 = add i8 %len_norange, 1
  %q1 = add i8 %len_norange, 2
; CHECK:  %q0 = add i8 %len_norange, 1
; CHECK-NEXT:  -->  (1 + %len_norange) U: full-set S: full-set
; CHECK:  %q1 = add i8 %len_norange, 2
; CHECK-NEXT:  -->  (2 + %len_norange) U: full-set S: full-set

  %q0.sext = sext i8 %q0 to i16
  %q1.sext = sext i8 %q1 to i16
; CHECK:  %q0.sext = sext i8 %q0 to i16
; CHECK-NEXT:  -->  (sext i8 (1 + %len_norange) to i16) U: [-128,128) S: [-128,128)
; CHECK:  %q1.sext = sext i8 %q1 to i16
; CHECK-NEXT:  -->  (sext i8 (2 + %len_norange) to i16) U: [-128,128) S: [-128,128)

  ret void
}

define void @f2(i8* %len_addr) {
; CHECK-LABEL: Classifying expressions for: @f2
 entry:
  %len = load i8, i8* %len_addr, !range !0
  %len_norange = load i8, i8* %len_addr
; CHECK:  %len = load i8, i8* %len_addr, !range !0
; CHECK-NEXT:  -->  %len U: [0,127) S: [0,127)
; CHECK:  %len_norange = load i8, i8* %len_addr
; CHECK-NEXT:  -->  %len_norange U: full-set S: full-set

  %t0 = add i8 %len, 1
  %t1 = add i8 %len, 2
; CHECK:  %t0 = add i8 %len, 1
; CHECK-NEXT:  -->  (1 + %len)<nuw><nsw>
; CHECK:  %t1 = add i8 %len, 2
; CHECK-NEXT:  -->  (2 + %len)<nuw>

  %t0.zext = zext i8 %t0 to i16
  %t1.zext = zext i8 %t1 to i16
; CHECK:  %t0.zext = zext i8 %t0 to i16
; CHECK-NEXT: -->  (1 + (zext i8 %len to i16))<nuw><nsw> U: [1,128) S: [1,128)
; CHECK:  %t1.zext = zext i8 %t1 to i16
; CHECK-NEXT:  -->  (2 + (zext i8 %len to i16))<nuw><nsw> U: [2,129) S: [2,129)

  %q0 = add i8 %len_norange, 1
  %q1 = add i8 %len_norange, 2
  %q0.zext = zext i8 %q0 to i16
  %q1.zext = zext i8 %q1 to i16

; CHECK:  %q0.zext = zext i8 %q0 to i16
; CHECK-NEXT:  -->  (zext i8 (1 + %len_norange) to i16) U: [0,256) S: [0,256)
; CHECK:  %q1.zext = zext i8 %q1 to i16
; CHECK-NEXT:  -->  (zext i8 (2 + %len_norange) to i16) U: [0,256) S: [0,256)

  ret void
}