blob: 205227ca0b7fb39ee85b8c3f31b20077fb9fd1ca [file] [log] [blame]
//===- ScalarEvolution.cpp - Scalar Evolution Analysis ----------*- C++ -*-===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file contains the implementation of the scalar evolution analysis
// engine, which is used primarily to analyze expressions involving induction
// variables in loops.
//
// There are several aspects to this library. First is the representation of
// scalar expressions, which are represented as subclasses of the SCEV class.
// These classes are used to represent certain types of subexpressions that we
// can handle. We only create one SCEV of a particular shape, so
// pointer-comparisons for equality are legal.
//
// One important aspect of the SCEV objects is that they are never cyclic, even
// if there is a cycle in the dataflow for an expression (ie, a PHI node). If
// the PHI node is one of the idioms that we can represent (e.g., a polynomial
// recurrence) then we represent it directly as a recurrence node, otherwise we
// represent it as a SCEVUnknown node.
//
// In addition to being able to represent expressions of various types, we also
// have folders that are used to build the *canonical* representation for a
// particular expression. These folders are capable of using a variety of
// rewrite rules to simplify the expressions.
//
// Once the folders are defined, we can implement the more interesting
// higher-level code, such as the code that recognizes PHI nodes of various
// types, computes the execution count of a loop, etc.
//
// TODO: We should use these routines and value representations to implement
// dependence analysis!
//
//===----------------------------------------------------------------------===//
//
// There are several good references for the techniques used in this analysis.
//
// Chains of recurrences -- a method to expedite the evaluation
// of closed-form functions
// Olaf Bachmann, Paul S. Wang, Eugene V. Zima
//
// On computational properties of chains of recurrences
// Eugene V. Zima
//
// Symbolic Evaluation of Chains of Recurrences for Loop Optimization
// Robert A. van Engelen
//
// Efficient Symbolic Analysis for Optimizing Compilers
// Robert A. van Engelen
//
// Using the chains of recurrences algebra for data dependence testing and
// induction variable substitution
// MS Thesis, Johnie Birch
//
//===----------------------------------------------------------------------===//
#define DEBUG_TYPE "scalar-evolution"
#include "llvm/Analysis/ScalarEvolutionExpressions.h"
#include "llvm/Constants.h"
#include "llvm/DerivedTypes.h"
#include "llvm/GlobalVariable.h"
#include "llvm/GlobalAlias.h"
#include "llvm/Instructions.h"
#include "llvm/LLVMContext.h"
#include "llvm/Operator.h"
#include "llvm/Analysis/ConstantFolding.h"
#include "llvm/Analysis/Dominators.h"
#include "llvm/Analysis/InstructionSimplify.h"
#include "llvm/Analysis/LoopInfo.h"
#include "llvm/Analysis/ValueTracking.h"
#include "llvm/Assembly/Writer.h"
#include "llvm/Target/TargetData.h"
#include "llvm/Target/TargetLibraryInfo.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/ConstantRange.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/GetElementPtrTypeIterator.h"
#include "llvm/Support/InstIterator.h"
#include "llvm/Support/MathExtras.h"
#include "llvm/Support/raw_ostream.h"
#include "llvm/ADT/Statistic.h"
#include "llvm/ADT/STLExtras.h"
#include "llvm/ADT/SmallPtrSet.h"
#include <algorithm>
using namespace llvm;
STATISTIC(NumArrayLenItCounts,
"Number of trip counts computed with array length");
STATISTIC(NumTripCountsComputed,
"Number of loops with predictable loop counts");
STATISTIC(NumTripCountsNotComputed,
"Number of loops without predictable loop counts");
STATISTIC(NumBruteForceTripCountsComputed,
"Number of loops with trip counts computed by force");
static cl::opt<unsigned>
MaxBruteForceIterations("scalar-evolution-max-iterations", cl::ReallyHidden,
cl::desc("Maximum number of iterations SCEV will "
"symbolically execute a constant "
"derived loop"),
cl::init(100));
INITIALIZE_PASS_BEGIN(ScalarEvolution, "scalar-evolution",
"Scalar Evolution Analysis", false, true)
INITIALIZE_PASS_DEPENDENCY(LoopInfo)
INITIALIZE_PASS_DEPENDENCY(DominatorTree)
INITIALIZE_PASS_DEPENDENCY(TargetLibraryInfo)
INITIALIZE_PASS_END(ScalarEvolution, "scalar-evolution",
"Scalar Evolution Analysis", false, true)
char ScalarEvolution::ID = 0;
//===----------------------------------------------------------------------===//
// SCEV class definitions
//===----------------------------------------------------------------------===//
//===----------------------------------------------------------------------===//
// Implementation of the SCEV class.
//
void SCEV::dump() const {
print(dbgs());
dbgs() << '\n';
}
void SCEV::print(raw_ostream &OS) const {
switch (getSCEVType()) {
case scConstant:
WriteAsOperand(OS, cast<SCEVConstant>(this)->getValue(), false);
return;
case scTruncate: {
const SCEVTruncateExpr *Trunc = cast<SCEVTruncateExpr>(this);
const SCEV *Op = Trunc->getOperand();
OS << "(trunc " << *Op->getType() << " " << *Op << " to "
<< *Trunc->getType() << ")";
return;
}
case scZeroExtend: {
const SCEVZeroExtendExpr *ZExt = cast<SCEVZeroExtendExpr>(this);
const SCEV *Op = ZExt->getOperand();
OS << "(zext " << *Op->getType() << " " << *Op << " to "
<< *ZExt->getType() << ")";
return;
}
case scSignExtend: {
const SCEVSignExtendExpr *SExt = cast<SCEVSignExtendExpr>(this);
const SCEV *Op = SExt->getOperand();
OS << "(sext " << *Op->getType() << " " << *Op << " to "
<< *SExt->getType() << ")";
return;
}
case scAddRecExpr: {
const SCEVAddRecExpr *AR = cast<SCEVAddRecExpr>(this);
OS << "{" << *AR->getOperand(0);
for (unsigned i = 1, e = AR->getNumOperands(); i != e; ++i)
OS << ",+," << *AR->getOperand(i);
OS << "}<";
if (AR->getNoWrapFlags(FlagNUW))
OS << "nuw><";
if (AR->getNoWrapFlags(FlagNSW))
OS << "nsw><";
if (AR->getNoWrapFlags(FlagNW) &&
!AR->getNoWrapFlags((NoWrapFlags)(FlagNUW | FlagNSW)))
OS << "nw><";
WriteAsOperand(OS, AR->getLoop()->getHeader(), /*PrintType=*/false);
OS << ">";
return;
}
case scAddExpr:
case scMulExpr:
case scUMaxExpr:
case scSMaxExpr: {
const SCEVNAryExpr *NAry = cast<SCEVNAryExpr>(this);
const char *OpStr = 0;
switch (NAry->getSCEVType()) {
case scAddExpr: OpStr = " + "; break;
case scMulExpr: OpStr = " * "; break;
case scUMaxExpr: OpStr = " umax "; break;
case scSMaxExpr: OpStr = " smax "; break;
}
OS << "(";
for (SCEVNAryExpr::op_iterator I = NAry->op_begin(), E = NAry->op_end();
I != E; ++I) {
OS << **I;
if (llvm::next(I) != E)
OS << OpStr;
}
OS << ")";
switch (NAry->getSCEVType()) {
case scAddExpr:
case scMulExpr:
if (NAry->getNoWrapFlags(FlagNUW))
OS << "<nuw>";
if (NAry->getNoWrapFlags(FlagNSW))
OS << "<nsw>";
}
return;
}
case scUDivExpr: {
const SCEVUDivExpr *UDiv = cast<SCEVUDivExpr>(this);
OS << "(" << *UDiv->getLHS() << " /u " << *UDiv->getRHS() << ")";
return;
}
case scUnknown: {
const SCEVUnknown *U = cast<SCEVUnknown>(this);
Type *AllocTy;
if (U->isSizeOf(AllocTy)) {
OS << "sizeof(" << *AllocTy << ")";
return;
}
if (U->isAlignOf(AllocTy)) {
OS << "alignof(" << *AllocTy << ")";
return;
}
Type *CTy;
Constant *FieldNo;
if (U->isOffsetOf(CTy, FieldNo)) {
OS << "offsetof(" << *CTy << ", ";
WriteAsOperand(OS, FieldNo, false);
OS << ")";
return;
}
// Otherwise just print it normally.
WriteAsOperand(OS, U->getValue(), false);
return;
}
case scCouldNotCompute:
OS << "***COULDNOTCOMPUTE***";
return;
default: break;
}
llvm_unreachable("Unknown SCEV kind!");
}
Type *SCEV::getType() const {
switch (getSCEVType()) {
case scConstant:
return cast<SCEVConstant>(this)->getType();
case scTruncate:
case scZeroExtend:
case scSignExtend:
return cast<SCEVCastExpr>(this)->getType();
case scAddRecExpr:
case scMulExpr:
case scUMaxExpr:
case scSMaxExpr:
return cast<SCEVNAryExpr>(this)->getType();
case scAddExpr:
return cast<SCEVAddExpr>(this)->getType();
case scUDivExpr:
return cast<SCEVUDivExpr>(this)->getType();
case scUnknown:
return cast<SCEVUnknown>(this)->getType();
case scCouldNotCompute:
llvm_unreachable("Attempt to use a SCEVCouldNotCompute object!");
default:
llvm_unreachable("Unknown SCEV kind!");
}
}
bool SCEV::isZero() const {
if (const SCEVConstant *SC = dyn_cast<SCEVConstant>(this))
return SC->getValue()->isZero();
return false;
}
bool SCEV::isOne() const {
if (const SCEVConstant *SC = dyn_cast<SCEVConstant>(this))
return SC->getValue()->isOne();
return false;
}
bool SCEV::isAllOnesValue() const {
if (const SCEVConstant *SC = dyn_cast<SCEVConstant>(this))
return SC->getValue()->isAllOnesValue();
return false;
}
/// isNonConstantNegative - Return true if the specified scev is negated, but
/// not a constant.
bool SCEV::isNonConstantNegative() const {
const SCEVMulExpr *Mul = dyn_cast<SCEVMulExpr>(this);
if (!Mul) return false;
// If there is a constant factor, it will be first.
const SCEVConstant *SC = dyn_cast<SCEVConstant>(Mul->getOperand(0));
if (!SC) return false;
// Return true if the value is negative, this matches things like (-42 * V).
return SC->getValue()->getValue().isNegative();
}
SCEVCouldNotCompute::SCEVCouldNotCompute() :
SCEV(FoldingSetNodeIDRef(), scCouldNotCompute) {}
bool SCEVCouldNotCompute::classof(const SCEV *S) {
return S->getSCEVType() == scCouldNotCompute;
}
const SCEV *ScalarEvolution::getConstant(ConstantInt *V) {
FoldingSetNodeID ID;
ID.AddInteger(scConstant);
ID.AddPointer(V);
void *IP = 0;
if (const SCEV *S = UniqueSCEVs.FindNodeOrInsertPos(ID, IP)) return S;
SCEV *S = new (SCEVAllocator) SCEVConstant(ID.Intern(SCEVAllocator), V);
UniqueSCEVs.InsertNode(S, IP);
return S;
}
const SCEV *ScalarEvolution::getConstant(const APInt& Val) {
return getConstant(ConstantInt::get(getContext(), Val));
}
const SCEV *
ScalarEvolution::getConstant(Type *Ty, uint64_t V, bool isSigned) {
IntegerType *ITy = cast<IntegerType>(getEffectiveSCEVType(Ty));
return getConstant(ConstantInt::get(ITy, V, isSigned));
}
SCEVCastExpr::SCEVCastExpr(const FoldingSetNodeIDRef ID,
unsigned SCEVTy, const SCEV *op, Type *ty)
: SCEV(ID, SCEVTy), Op(op), Ty(ty) {}
SCEVTruncateExpr::SCEVTruncateExpr(const FoldingSetNodeIDRef ID,
const SCEV *op, Type *ty)
: SCEVCastExpr(ID, scTruncate, op, ty) {
assert((Op->getType()->isIntegerTy() || Op->getType()->isPointerTy()) &&
(Ty->isIntegerTy() || Ty->isPointerTy()) &&
"Cannot truncate non-integer value!");
}
SCEVZeroExtendExpr::SCEVZeroExtendExpr(const FoldingSetNodeIDRef ID,
const SCEV *op, Type *ty)
: SCEVCastExpr(ID, scZeroExtend, op, ty) {
assert((Op->getType()->isIntegerTy() || Op->getType()->isPointerTy()) &&
(Ty->isIntegerTy() || Ty->isPointerTy()) &&
"Cannot zero extend non-integer value!");
}
SCEVSignExtendExpr::SCEVSignExtendExpr(const FoldingSetNodeIDRef ID,
const SCEV *op, Type *ty)
: SCEVCastExpr(ID, scSignExtend, op, ty) {
assert((Op->getType()->isIntegerTy() || Op->getType()->isPointerTy()) &&
(Ty->isIntegerTy() || Ty->isPointerTy()) &&
"Cannot sign extend non-integer value!");
}
void SCEVUnknown::deleted() {
// Clear this SCEVUnknown from various maps.
SE->forgetMemoizedResults(this);
// Remove this SCEVUnknown from the uniquing map.
SE->UniqueSCEVs.RemoveNode(this);
// Release the value.
setValPtr(0);
}
void SCEVUnknown::allUsesReplacedWith(Value *New) {
// Clear this SCEVUnknown from various maps.
SE->forgetMemoizedResults(this);
// Remove this SCEVUnknown from the uniquing map.
SE->UniqueSCEVs.RemoveNode(this);
// Update this SCEVUnknown to point to the new value. This is needed
// because there may still be outstanding SCEVs which still point to
// this SCEVUnknown.
setValPtr(New);
}
bool SCEVUnknown::isSizeOf(Type *&AllocTy) const {
if (ConstantExpr *VCE = dyn_cast<ConstantExpr>(getValue()))
if (VCE->getOpcode() == Instruction::PtrToInt)
if (ConstantExpr *CE = dyn_cast<ConstantExpr>(VCE->getOperand(0)))
if (CE->getOpcode() == Instruction::GetElementPtr &&
CE->getOperand(0)->isNullValue() &&
CE->getNumOperands() == 2)
if (ConstantInt *CI = dyn_cast<ConstantInt>(CE->getOperand(1)))
if (CI->isOne()) {
AllocTy = cast<PointerType>(CE->getOperand(0)->getType())
->getElementType();
return true;
}
return false;
}
bool SCEVUnknown::isAlignOf(Type *&AllocTy) const {
if (ConstantExpr *VCE = dyn_cast<ConstantExpr>(getValue()))
if (VCE->getOpcode() == Instruction::PtrToInt)
if (ConstantExpr *CE = dyn_cast<ConstantExpr>(VCE->getOperand(0)))
if (CE->getOpcode() == Instruction::GetElementPtr &&
CE->getOperand(0)->isNullValue()) {
Type *Ty =
cast<PointerType>(CE->getOperand(0)->getType())->getElementType();
if (StructType *STy = dyn_cast<StructType>(Ty))
if (!STy->isPacked() &&
CE->getNumOperands() == 3 &&
CE->getOperand(1)->isNullValue()) {
if (ConstantInt *CI = dyn_cast<ConstantInt>(CE->getOperand(2)))
if (CI->isOne() &&
STy->getNumElements() == 2 &&
STy->getElementType(0)->isIntegerTy(1)) {
AllocTy = STy->getElementType(1);
return true;
}
}
}
return false;
}
bool SCEVUnknown::isOffsetOf(Type *&CTy, Constant *&FieldNo) const {
if (ConstantExpr *VCE = dyn_cast<ConstantExpr>(getValue()))
if (VCE->getOpcode() == Instruction::PtrToInt)
if (ConstantExpr *CE = dyn_cast<ConstantExpr>(VCE->getOperand(0)))
if (CE->getOpcode() == Instruction::GetElementPtr &&
CE->getNumOperands() == 3 &&
CE->getOperand(0)->isNullValue() &&
CE->getOperand(1)->isNullValue()) {
Type *Ty =
cast<PointerType>(CE->getOperand(0)->getType())->getElementType();
// Ignore vector types here so that ScalarEvolutionExpander doesn't
// emit getelementptrs that index into vectors.
if (Ty->isStructTy() || Ty->isArrayTy()) {
CTy = Ty;
FieldNo = CE->getOperand(2);
return true;
}
}
return false;
}
//===----------------------------------------------------------------------===//
// SCEV Utilities
//===----------------------------------------------------------------------===//
namespace {
/// SCEVComplexityCompare - Return true if the complexity of the LHS is less
/// than the complexity of the RHS. This comparator is used to canonicalize
/// expressions.
class SCEVComplexityCompare {
const LoopInfo *const LI;
public:
explicit SCEVComplexityCompare(const LoopInfo *li) : LI(li) {}
// Return true or false if LHS is less than, or at least RHS, respectively.
bool operator()(const SCEV *LHS, const SCEV *RHS) const {
return compare(LHS, RHS) < 0;
}
// Return negative, zero, or positive, if LHS is less than, equal to, or
// greater than RHS, respectively. A three-way result allows recursive
// comparisons to be more efficient.
int compare(const SCEV *LHS, const SCEV *RHS) const {
// Fast-path: SCEVs are uniqued so we can do a quick equality check.
if (LHS == RHS)
return 0;
// Primarily, sort the SCEVs by their getSCEVType().
unsigned LType = LHS->getSCEVType(), RType = RHS->getSCEVType();
if (LType != RType)
return (int)LType - (int)RType;
// Aside from the getSCEVType() ordering, the particular ordering
// isn't very important except that it's beneficial to be consistent,
// so that (a + b) and (b + a) don't end up as different expressions.
switch (LType) {
case scUnknown: {
const SCEVUnknown *LU = cast<SCEVUnknown>(LHS);
const SCEVUnknown *RU = cast<SCEVUnknown>(RHS);
// Sort SCEVUnknown values with some loose heuristics. TODO: This is
// not as complete as it could be.
const Value *LV = LU->getValue(), *RV = RU->getValue();
// Order pointer values after integer values. This helps SCEVExpander
// form GEPs.
bool LIsPointer = LV->getType()->isPointerTy(),
RIsPointer = RV->getType()->isPointerTy();
if (LIsPointer != RIsPointer)
return (int)LIsPointer - (int)RIsPointer;
// Compare getValueID values.
unsigned LID = LV->getValueID(),
RID = RV->getValueID();
if (LID != RID)
return (int)LID - (int)RID;
// Sort arguments by their position.
if (const Argument *LA = dyn_cast<Argument>(LV)) {
const Argument *RA = cast<Argument>(RV);
unsigned LArgNo = LA->getArgNo(), RArgNo = RA->getArgNo();
return (int)LArgNo - (int)RArgNo;
}
// For instructions, compare their loop depth, and their operand
// count. This is pretty loose.
if (const Instruction *LInst = dyn_cast<Instruction>(LV)) {
const Instruction *RInst = cast<Instruction>(RV);
// Compare loop depths.
const BasicBlock *LParent = LInst->getParent(),
*RParent = RInst->getParent();
if (LParent != RParent) {
unsigned LDepth = LI->getLoopDepth(LParent),
RDepth = LI->getLoopDepth(RParent);
if (LDepth != RDepth)
return (int)LDepth - (int)RDepth;
}
// Compare the number of operands.
unsigned LNumOps = LInst->getNumOperands(),
RNumOps = RInst->getNumOperands();
return (int)LNumOps - (int)RNumOps;
}
return 0;
}
case scConstant: {
const SCEVConstant *LC = cast<SCEVConstant>(LHS);
const SCEVConstant *RC = cast<SCEVConstant>(RHS);
// Compare constant values.
const APInt &LA = LC->getValue()->getValue();
const APInt &RA = RC->getValue()->getValue();
unsigned LBitWidth = LA.getBitWidth(), RBitWidth = RA.getBitWidth();
if (LBitWidth != RBitWidth)
return (int)LBitWidth - (int)RBitWidth;
return LA.ult(RA) ? -1 : 1;
}
case scAddRecExpr: {
const SCEVAddRecExpr *LA = cast<SCEVAddRecExpr>(LHS);
const SCEVAddRecExpr *RA = cast<SCEVAddRecExpr>(RHS);
// Compare addrec loop depths.
const Loop *LLoop = LA->getLoop(), *RLoop = RA->getLoop();
if (LLoop != RLoop) {
unsigned LDepth = LLoop->getLoopDepth(),
RDepth = RLoop->getLoopDepth();
if (LDepth != RDepth)
return (int)LDepth - (int)RDepth;
}
// Addrec complexity grows with operand count.
unsigned LNumOps = LA->getNumOperands(), RNumOps = RA->getNumOperands();
if (LNumOps != RNumOps)
return (int)LNumOps - (int)RNumOps;
// Lexicographically compare.
for (unsigned i = 0; i != LNumOps; ++i) {
long X = compare(LA->getOperand(i), RA->getOperand(i));
if (X != 0)
return X;
}
return 0;
}
case scAddExpr:
case scMulExpr:
case scSMaxExpr:
case scUMaxExpr: {
const SCEVNAryExpr *LC = cast<SCEVNAryExpr>(LHS);
const SCEVNAryExpr *RC = cast<SCEVNAryExpr>(RHS);
// Lexicographically compare n-ary expressions.
unsigned LNumOps = LC->getNumOperands(), RNumOps = RC->getNumOperands();
for (unsigned i = 0; i != LNumOps; ++i) {
if (i >= RNumOps)
return 1;
long X = compare(LC->getOperand(i), RC->getOperand(i));
if (X != 0)
return X;
}
return (int)LNumOps - (int)RNumOps;
}
case scUDivExpr: {
const SCEVUDivExpr *LC = cast<SCEVUDivExpr>(LHS);
const SCEVUDivExpr *RC = cast<SCEVUDivExpr>(RHS);
// Lexicographically compare udiv expressions.
long X = compare(LC->getLHS(), RC->getLHS());
if (X != 0)
return X;
return compare(LC->getRHS(), RC->getRHS());
}
case scTruncate:
case scZeroExtend:
case scSignExtend: {
const SCEVCastExpr *LC = cast<SCEVCastExpr>(LHS);
const SCEVCastExpr *RC = cast<SCEVCastExpr>(RHS);
// Compare cast expressions by operand.
return compare(LC->getOperand(), RC->getOperand());
}
default:
llvm_unreachable("Unknown SCEV kind!");
}
}
};
}
/// GroupByComplexity - Given a list of SCEV objects, order them by their
/// complexity, and group objects of the same complexity together by value.
/// When this routine is finished, we know that any duplicates in the vector are
/// consecutive and that complexity is monotonically increasing.
///
/// Note that we go take special precautions to ensure that we get deterministic
/// results from this routine. In other words, we don't want the results of
/// this to depend on where the addresses of various SCEV objects happened to
/// land in memory.
///
static void GroupByComplexity(SmallVectorImpl<const SCEV *> &Ops,
LoopInfo *LI) {
if (Ops.size() < 2) return; // Noop
if (Ops.size() == 2) {
// This is the common case, which also happens to be trivially simple.
// Special case it.
const SCEV *&LHS = Ops[0], *&RHS = Ops[1];
if (SCEVComplexityCompare(LI)(RHS, LHS))
std::swap(LHS, RHS);
return;
}
// Do the rough sort by complexity.
std::stable_sort(Ops.begin(), Ops.end(), SCEVComplexityCompare(LI));
// Now that we are sorted by complexity, group elements of the same
// complexity. Note that this is, at worst, N^2, but the vector is likely to
// be extremely short in practice. Note that we take this approach because we
// do not want to depend on the addresses of the objects we are grouping.
for (unsigned i = 0, e = Ops.size(); i != e-2; ++i) {
const SCEV *S = Ops[i];
unsigned Complexity = S->getSCEVType();
// If there are any objects of the same complexity and same value as this
// one, group them.
for (unsigned j = i+1; j != e && Ops[j]->getSCEVType() == Complexity; ++j) {
if (Ops[j] == S) { // Found a duplicate.
// Move it to immediately after i'th element.
std::swap(Ops[i+1], Ops[j]);
++i; // no need to rescan it.
if (i == e-2) return; // Done!
}
}
}
}
//===----------------------------------------------------------------------===//
// Simple SCEV method implementations
//===----------------------------------------------------------------------===//
/// BinomialCoefficient - Compute BC(It, K). The result has width W.
/// Assume, K > 0.
static const SCEV *BinomialCoefficient(const SCEV *It, unsigned K,
ScalarEvolution &SE,
Type *ResultTy) {
// Handle the simplest case efficiently.
if (K == 1)
return SE.getTruncateOrZeroExtend(It, ResultTy);
// We are using the following formula for BC(It, K):
//
// BC(It, K) = (It * (It - 1) * ... * (It - K + 1)) / K!
//
// Suppose, W is the bitwidth of the return value. We must be prepared for
// overflow. Hence, we must assure that the result of our computation is
// equal to the accurate one modulo 2^W. Unfortunately, division isn't
// safe in modular arithmetic.
//
// However, this code doesn't use exactly that formula; the formula it uses
// is something like the following, where T is the number of factors of 2 in
// K! (i.e. trailing zeros in the binary representation of K!), and ^ is
// exponentiation:
//
// BC(It, K) = (It * (It - 1) * ... * (It - K + 1)) / 2^T / (K! / 2^T)
//
// This formula is trivially equivalent to the previous formula. However,
// this formula can be implemented much more efficiently. The trick is that
// K! / 2^T is odd, and exact division by an odd number *is* safe in modular
// arithmetic. To do exact division in modular arithmetic, all we have
// to do is multiply by the inverse. Therefore, this step can be done at
// width W.
//
// The next issue is how to safely do the division by 2^T. The way this
// is done is by doing the multiplication step at a width of at least W + T
// bits. This way, the bottom W+T bits of the product are accurate. Then,
// when we perform the division by 2^T (which is equivalent to a right shift
// by T), the bottom W bits are accurate. Extra bits are okay; they'll get
// truncated out after the division by 2^T.
//
// In comparison to just directly using the first formula, this technique
// is much more efficient; using the first formula requires W * K bits,
// but this formula less than W + K bits. Also, the first formula requires
// a division step, whereas this formula only requires multiplies and shifts.
//
// It doesn't matter whether the subtraction step is done in the calculation
// width or the input iteration count's width; if the subtraction overflows,
// the result must be zero anyway. We prefer here to do it in the width of
// the induction variable because it helps a lot for certain cases; CodeGen
// isn't smart enough to ignore the overflow, which leads to much less
// efficient code if the width of the subtraction is wider than the native
// register width.
//
// (It's possible to not widen at all by pulling out factors of 2 before
// the multiplication; for example, K=2 can be calculated as
// It/2*(It+(It*INT_MIN/INT_MIN)+-1). However, it requires
// extra arithmetic, so it's not an obvious win, and it gets
// much more complicated for K > 3.)
// Protection from insane SCEVs; this bound is conservative,
// but it probably doesn't matter.
if (K > 1000)
return SE.getCouldNotCompute();
unsigned W = SE.getTypeSizeInBits(ResultTy);
// Calculate K! / 2^T and T; we divide out the factors of two before
// multiplying for calculating K! / 2^T to avoid overflow.
// Other overflow doesn't matter because we only care about the bottom
// W bits of the result.
APInt OddFactorial(W, 1);
unsigned T = 1;
for (unsigned i = 3; i <= K; ++i) {
APInt Mult(W, i);
unsigned TwoFactors = Mult.countTrailingZeros();
T += TwoFactors;
Mult = Mult.lshr(TwoFactors);
OddFactorial *= Mult;
}
// We need at least W + T bits for the multiplication step
unsigned CalculationBits = W + T;
// Calculate 2^T, at width T+W.
APInt DivFactor = APInt(CalculationBits, 1).shl(T);
// Calculate the multiplicative inverse of K! / 2^T;
// this multiplication factor will perform the exact division by
// K! / 2^T.
APInt Mod = APInt::getSignedMinValue(W+1);
APInt MultiplyFactor = OddFactorial.zext(W+1);
MultiplyFactor = MultiplyFactor.multiplicativeInverse(Mod);
MultiplyFactor = MultiplyFactor.trunc(W);
// Calculate the product, at width T+W
IntegerType *CalculationTy = IntegerType::get(SE.getContext(),
CalculationBits);
const SCEV *Dividend = SE.getTruncateOrZeroExtend(It, CalculationTy);
for (unsigned i = 1; i != K; ++i) {
const SCEV *S = SE.getMinusSCEV(It, SE.getConstant(It->getType(), i));
Dividend = SE.getMulExpr(Dividend,
SE.getTruncateOrZeroExtend(S, CalculationTy));
}
// Divide by 2^T
const SCEV *DivResult = SE.getUDivExpr(Dividend, SE.getConstant(DivFactor));
// Truncate the result, and divide by K! / 2^T.
return SE.getMulExpr(SE.getConstant(MultiplyFactor),
SE.getTruncateOrZeroExtend(DivResult, ResultTy));
}
/// evaluateAtIteration - Return the value of this chain of recurrences at
/// the specified iteration number. We can evaluate this recurrence by
/// multiplying each element in the chain by the binomial coefficient
/// corresponding to it. In other words, we can evaluate {A,+,B,+,C,+,D} as:
///
/// A*BC(It, 0) + B*BC(It, 1) + C*BC(It, 2) + D*BC(It, 3)
///
/// where BC(It, k) stands for binomial coefficient.
///
const SCEV *SCEVAddRecExpr::evaluateAtIteration(const SCEV *It,
ScalarEvolution &SE) const {
const SCEV *Result = getStart();
for (unsigned i = 1, e = getNumOperands(); i != e; ++i) {
// The computation is correct in the face of overflow provided that the
// multiplication is performed _after_ the evaluation of the binomial
// coefficient.
const SCEV *Coeff = BinomialCoefficient(It, i, SE, getType());
if (isa<SCEVCouldNotCompute>(Coeff))
return Coeff;
Result = SE.getAddExpr(Result, SE.getMulExpr(getOperand(i), Coeff));
}
return Result;
}
//===----------------------------------------------------------------------===//
// SCEV Expression folder implementations
//===----------------------------------------------------------------------===//
const SCEV *ScalarEvolution::getTruncateExpr(const SCEV *Op,
Type *Ty) {
assert(getTypeSizeInBits(Op->getType()) > getTypeSizeInBits(Ty) &&
"This is not a truncating conversion!");
assert(isSCEVable(Ty) &&
"This is not a conversion to a SCEVable type!");
Ty = getEffectiveSCEVType(Ty);
FoldingSetNodeID ID;
ID.AddInteger(scTruncate);
ID.AddPointer(Op);
ID.AddPointer(Ty);
void *IP = 0;
if (const SCEV *S = UniqueSCEVs.FindNodeOrInsertPos(ID, IP)) return S;
// Fold if the operand is constant.
if (const SCEVConstant *SC = dyn_cast<SCEVConstant>(Op))
return getConstant(
cast<ConstantInt>(ConstantExpr::getTrunc(SC->getValue(),
getEffectiveSCEVType(Ty))));
// trunc(trunc(x)) --> trunc(x)
if (const SCEVTruncateExpr *ST = dyn_cast<SCEVTruncateExpr>(Op))
return getTruncateExpr(ST->getOperand(), Ty);
// trunc(sext(x)) --> sext(x) if widening or trunc(x) if narrowing
if (const SCEVSignExtendExpr *SS = dyn_cast<SCEVSignExtendExpr>(Op))
return getTruncateOrSignExtend(SS->getOperand(), Ty);
// trunc(zext(x)) --> zext(x) if widening or trunc(x) if narrowing
if (const SCEVZeroExtendExpr *SZ = dyn_cast<SCEVZeroExtendExpr>(Op))
return getTruncateOrZeroExtend(SZ->getOperand(), Ty);
// trunc(x1+x2+...+xN) --> trunc(x1)+trunc(x2)+...+trunc(xN) if we can
// eliminate all the truncates.
if (const SCEVAddExpr *SA = dyn_cast<SCEVAddExpr>(Op)) {
SmallVector<const SCEV *, 4> Operands;
bool hasTrunc = false;
for (unsigned i = 0, e = SA->getNumOperands(); i != e && !hasTrunc; ++i) {
const SCEV *S = getTruncateExpr(SA->getOperand(i), Ty);
hasTrunc = isa<SCEVTruncateExpr>(S);
Operands.push_back(S);
}
if (!hasTrunc)
return getAddExpr(Operands);
UniqueSCEVs.FindNodeOrInsertPos(ID, IP); // Mutates IP, returns NULL.
}
// trunc(x1*x2*...*xN) --> trunc(x1)*trunc(x2)*...*trunc(xN) if we can
// eliminate all the truncates.
if (const SCEVMulExpr *SM = dyn_cast<SCEVMulExpr>(Op)) {
SmallVector<const SCEV *, 4> Operands;
bool hasTrunc = false;
for (unsigned i = 0, e = SM->getNumOperands(); i != e && !hasTrunc; ++i) {
const SCEV *S = getTruncateExpr(SM->getOperand(i), Ty);
hasTrunc = isa<SCEVTruncateExpr>(S);
Operands.push_back(S);
}
if (!hasTrunc)
return getMulExpr(Operands);
UniqueSCEVs.FindNodeOrInsertPos(ID, IP); // Mutates IP, returns NULL.
}
// If the input value is a chrec scev, truncate the chrec's operands.
if (const SCEVAddRecExpr *AddRec = dyn_cast<SCEVAddRecExpr>(Op)) {
SmallVector<const SCEV *, 4> Operands;
for (unsigned i = 0, e = AddRec->getNumOperands(); i != e; ++i)
Operands.push_back(getTruncateExpr(AddRec->getOperand(i), Ty));
return getAddRecExpr(Operands, AddRec->getLoop(), SCEV::FlagAnyWrap);
}
// As a special case, fold trunc(undef) to undef. We don't want to
// know too much about SCEVUnknowns, but this special case is handy
// and harmless.
if (const SCEVUnknown *U = dyn_cast<SCEVUnknown>(Op))
if (isa<UndefValue>(U->getValue()))
return getSCEV(UndefValue::get(Ty));
// The cast wasn't folded; create an explicit cast node. We can reuse
// the existing insert position since if we get here, we won't have
// made any changes which would invalidate it.
SCEV *S = new (SCEVAllocator) SCEVTruncateExpr(ID.Intern(SCEVAllocator),
Op, Ty);
UniqueSCEVs.InsertNode(S, IP);
return S;
}
const SCEV *ScalarEvolution::getZeroExtendExpr(const SCEV *Op,
Type *Ty) {
assert(getTypeSizeInBits(Op->getType()) < getTypeSizeInBits(Ty) &&
"This is not an extending conversion!");
assert(isSCEVable(Ty) &&
"This is not a conversion to a SCEVable type!");
Ty = getEffectiveSCEVType(Ty);
// Fold if the operand is constant.
if (const SCEVConstant *SC = dyn_cast<SCEVConstant>(Op))
return getConstant(
cast<ConstantInt>(ConstantExpr::getZExt(SC->getValue(),
getEffectiveSCEVType(Ty))));
// zext(zext(x)) --> zext(x)
if (const SCEVZeroExtendExpr *SZ = dyn_cast<SCEVZeroExtendExpr>(Op))
return getZeroExtendExpr(SZ->getOperand(), Ty);
// Before doing any expensive analysis, check to see if we've already
// computed a SCEV for this Op and Ty.
FoldingSetNodeID ID;
ID.AddInteger(scZeroExtend);
ID.AddPointer(Op);
ID.AddPointer(Ty);
void *IP = 0;
if (const SCEV *S = UniqueSCEVs.FindNodeOrInsertPos(ID, IP)) return S;
// zext(trunc(x)) --> zext(x) or x or trunc(x)
if (const SCEVTruncateExpr *ST = dyn_cast<SCEVTruncateExpr>(Op)) {
// It's possible the bits taken off by the truncate were all zero bits. If
// so, we should be able to simplify this further.
const SCEV *X = ST->getOperand();
ConstantRange CR = getUnsignedRange(X);
unsigned TruncBits = getTypeSizeInBits(ST->getType());
unsigned NewBits = getTypeSizeInBits(Ty);
if (CR.truncate(TruncBits).zeroExtend(NewBits).contains(
CR.zextOrTrunc(NewBits)))
return getTruncateOrZeroExtend(X, Ty);
}
// If the input value is a chrec scev, and we can prove that the value
// did not overflow the old, smaller, value, we can zero extend all of the
// operands (often constants). This allows analysis of something like
// this: for (unsigned char X = 0; X < 100; ++X) { int Y = X; }
if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(Op))
if (AR->isAffine()) {
const SCEV *Start = AR->getStart();
const SCEV *Step = AR->getStepRecurrence(*this);
unsigned BitWidth = getTypeSizeInBits(AR->getType());
const Loop *L = AR->getLoop();
// If we have special knowledge that this addrec won't overflow,
// we don't need to do any further analysis.
if (AR->getNoWrapFlags(SCEV::FlagNUW))
return getAddRecExpr(getZeroExtendExpr(Start, Ty),
getZeroExtendExpr(Step, Ty),
L, AR->getNoWrapFlags());
// Check whether the backedge-taken count is SCEVCouldNotCompute.
// Note that this serves two purposes: It filters out loops that are
// simply not analyzable, and it covers the case where this code is
// being called from within backedge-taken count analysis, such that
// attempting to ask for the backedge-taken count would likely result
// in infinite recursion. In the later case, the analysis code will
// cope with a conservative value, and it will take care to purge
// that value once it has finished.
const SCEV *MaxBECount = getMaxBackedgeTakenCount(L);
if (!isa<SCEVCouldNotCompute>(MaxBECount)) {
// Manually compute the final value for AR, checking for
// overflow.
// Check whether the backedge-taken count can be losslessly casted to
// the addrec's type. The count is always unsigned.
const SCEV *CastedMaxBECount =
getTruncateOrZeroExtend(MaxBECount, Start->getType());
const SCEV *RecastedMaxBECount =
getTruncateOrZeroExtend(CastedMaxBECount, MaxBECount->getType());
if (MaxBECount == RecastedMaxBECount) {
Type *WideTy = IntegerType::get(getContext(), BitWidth * 2);
// Check whether Start+Step*MaxBECount has no unsigned overflow.
const SCEV *ZMul = getMulExpr(CastedMaxBECount, Step);
const SCEV *Add = getAddExpr(Start, ZMul);
const SCEV *OperandExtendedAdd =
getAddExpr(getZeroExtendExpr(Start, WideTy),
getMulExpr(getZeroExtendExpr(CastedMaxBECount, WideTy),
getZeroExtendExpr(Step, WideTy)));
if (getZeroExtendExpr(Add, WideTy) == OperandExtendedAdd) {
// Cache knowledge of AR NUW, which is propagated to this AddRec.
const_cast<SCEVAddRecExpr *>(AR)->setNoWrapFlags(SCEV::FlagNUW);
// Return the expression with the addrec on the outside.
return getAddRecExpr(getZeroExtendExpr(Start, Ty),
getZeroExtendExpr(Step, Ty),
L, AR->getNoWrapFlags());
}
// Similar to above, only this time treat the step value as signed.
// This covers loops that count down.
const SCEV *SMul = getMulExpr(CastedMaxBECount, Step);
Add = getAddExpr(Start, SMul);
OperandExtendedAdd =
getAddExpr(getZeroExtendExpr(Start, WideTy),
getMulExpr(getZeroExtendExpr(CastedMaxBECount, WideTy),
getSignExtendExpr(Step, WideTy)));
if (getZeroExtendExpr(Add, WideTy) == OperandExtendedAdd) {
// Cache knowledge of AR NW, which is propagated to this AddRec.
// Negative step causes unsigned wrap, but it still can't self-wrap.
const_cast<SCEVAddRecExpr *>(AR)->setNoWrapFlags(SCEV::FlagNW);
// Return the expression with the addrec on the outside.
return getAddRecExpr(getZeroExtendExpr(Start, Ty),
getSignExtendExpr(Step, Ty),
L, AR->getNoWrapFlags());
}
}
// If the backedge is guarded by a comparison with the pre-inc value
// the addrec is safe. Also, if the entry is guarded by a comparison
// with the start value and the backedge is guarded by a comparison
// with the post-inc value, the addrec is safe.
if (isKnownPositive(Step)) {
const SCEV *N = getConstant(APInt::getMinValue(BitWidth) -
getUnsignedRange(Step).getUnsignedMax());
if (isLoopBackedgeGuardedByCond(L, ICmpInst::ICMP_ULT, AR, N) ||
(isLoopEntryGuardedByCond(L, ICmpInst::ICMP_ULT, Start, N) &&
isLoopBackedgeGuardedByCond(L, ICmpInst::ICMP_ULT,
AR->getPostIncExpr(*this), N))) {
// Cache knowledge of AR NUW, which is propagated to this AddRec.
const_cast<SCEVAddRecExpr *>(AR)->setNoWrapFlags(SCEV::FlagNUW);
// Return the expression with the addrec on the outside.
return getAddRecExpr(getZeroExtendExpr(Start, Ty),
getZeroExtendExpr(Step, Ty),
L, AR->getNoWrapFlags());
}
} else if (isKnownNegative(Step)) {
const SCEV *N = getConstant(APInt::getMaxValue(BitWidth) -
getSignedRange(Step).getSignedMin());
if (isLoopBackedgeGuardedByCond(L, ICmpInst::ICMP_UGT, AR, N) ||
(isLoopEntryGuardedByCond(L, ICmpInst::ICMP_UGT, Start, N) &&
isLoopBackedgeGuardedByCond(L, ICmpInst::ICMP_UGT,
AR->getPostIncExpr(*this), N))) {
// Cache knowledge of AR NW, which is propagated to this AddRec.
// Negative step causes unsigned wrap, but it still can't self-wrap.
const_cast<SCEVAddRecExpr *>(AR)->setNoWrapFlags(SCEV::FlagNW);
// Return the expression with the addrec on the outside.
return getAddRecExpr(getZeroExtendExpr(Start, Ty),
getSignExtendExpr(Step, Ty),
L, AR->getNoWrapFlags());
}
}
}
}
// The cast wasn't folded; create an explicit cast node.
// Recompute the insert position, as it may have been invalidated.
if (const SCEV *S = UniqueSCEVs.FindNodeOrInsertPos(ID, IP)) return S;
SCEV *S = new (SCEVAllocator) SCEVZeroExtendExpr(ID.Intern(SCEVAllocator),
Op, Ty);
UniqueSCEVs.InsertNode(S, IP);
return S;
}
// Get the limit of a recurrence such that incrementing by Step cannot cause
// signed overflow as long as the value of the recurrence within the loop does
// not exceed this limit before incrementing.
static const SCEV *getOverflowLimitForStep(const SCEV *Step,
ICmpInst::Predicate *Pred,
ScalarEvolution *SE) {
unsigned BitWidth = SE->getTypeSizeInBits(Step->getType());
if (SE->isKnownPositive(Step)) {
*Pred = ICmpInst::ICMP_SLT;
return SE->getConstant(APInt::getSignedMinValue(BitWidth) -
SE->getSignedRange(Step).getSignedMax());
}
if (SE->isKnownNegative(Step)) {
*Pred = ICmpInst::ICMP_SGT;
return SE->getConstant(APInt::getSignedMaxValue(BitWidth) -
SE->getSignedRange(Step).getSignedMin());
}
return 0;
}
// The recurrence AR has been shown to have no signed wrap. Typically, if we can
// prove NSW for AR, then we can just as easily prove NSW for its preincrement
// or postincrement sibling. This allows normalizing a sign extended AddRec as
// such: {sext(Step + Start),+,Step} => {(Step + sext(Start),+,Step} As a
// result, the expression "Step + sext(PreIncAR)" is congruent with
// "sext(PostIncAR)"
static const SCEV *getPreStartForSignExtend(const SCEVAddRecExpr *AR,
Type *Ty,
ScalarEvolution *SE) {
const Loop *L = AR->getLoop();
const SCEV *Start = AR->getStart();
const SCEV *Step = AR->getStepRecurrence(*SE);
// Check for a simple looking step prior to loop entry.
const SCEVAddExpr *SA = dyn_cast<SCEVAddExpr>(Start);
if (!SA)
return 0;
// Create an AddExpr for "PreStart" after subtracting Step. Full SCEV
// subtraction is expensive. For this purpose, perform a quick and dirty
// difference, by checking for Step in the operand list.
SmallVector<const SCEV *, 4> DiffOps;
for (SCEVAddExpr::op_iterator I = SA->op_begin(), E = SA->op_end();
I != E; ++I) {
if (*I != Step)
DiffOps.push_back(*I);
}
if (DiffOps.size() == SA->getNumOperands())
return 0;
// This is a postinc AR. Check for overflow on the preinc recurrence using the
// same three conditions that getSignExtendedExpr checks.
// 1. NSW flags on the step increment.
const SCEV *PreStart = SE->getAddExpr(DiffOps, SA->getNoWrapFlags());
const SCEVAddRecExpr *PreAR = dyn_cast<SCEVAddRecExpr>(
SE->getAddRecExpr(PreStart, Step, L, SCEV::FlagAnyWrap));
if (PreAR && PreAR->getNoWrapFlags(SCEV::FlagNSW))
return PreStart;
// 2. Direct overflow check on the step operation's expression.
unsigned BitWidth = SE->getTypeSizeInBits(AR->getType());
Type *WideTy = IntegerType::get(SE->getContext(), BitWidth * 2);
const SCEV *OperandExtendedStart =
SE->getAddExpr(SE->getSignExtendExpr(PreStart, WideTy),
SE->getSignExtendExpr(Step, WideTy));
if (SE->getSignExtendExpr(Start, WideTy) == OperandExtendedStart) {
// Cache knowledge of PreAR NSW.
if (PreAR)
const_cast<SCEVAddRecExpr *>(PreAR)->setNoWrapFlags(SCEV::FlagNSW);
// FIXME: this optimization needs a unit test
DEBUG(dbgs() << "SCEV: untested prestart overflow check\n");
return PreStart;
}
// 3. Loop precondition.
ICmpInst::Predicate Pred;
const SCEV *OverflowLimit = getOverflowLimitForStep(Step, &Pred, SE);
if (OverflowLimit &&
SE->isLoopEntryGuardedByCond(L, Pred, PreStart, OverflowLimit)) {
return PreStart;
}
return 0;
}
// Get the normalized sign-extended expression for this AddRec's Start.
static const SCEV *getSignExtendAddRecStart(const SCEVAddRecExpr *AR,
Type *Ty,
ScalarEvolution *SE) {
const SCEV *PreStart = getPreStartForSignExtend(AR, Ty, SE);
if (!PreStart)
return SE->getSignExtendExpr(AR->getStart(), Ty);
return SE->getAddExpr(SE->getSignExtendExpr(AR->getStepRecurrence(*SE), Ty),
SE->getSignExtendExpr(PreStart, Ty));
}
const SCEV *ScalarEvolution::getSignExtendExpr(const SCEV *Op,
Type *Ty) {
assert(getTypeSizeInBits(Op->getType()) < getTypeSizeInBits(Ty) &&
"This is not an extending conversion!");
assert(isSCEVable(Ty) &&
"This is not a conversion to a SCEVable type!");
Ty = getEffectiveSCEVType(Ty);
// Fold if the operand is constant.
if (const SCEVConstant *SC = dyn_cast<SCEVConstant>(Op))
return getConstant(
cast<ConstantInt>(ConstantExpr::getSExt(SC->getValue(),
getEffectiveSCEVType(Ty))));
// sext(sext(x)) --> sext(x)
if (const SCEVSignExtendExpr *SS = dyn_cast<SCEVSignExtendExpr>(Op))
return getSignExtendExpr(SS->getOperand(), Ty);
// sext(zext(x)) --> zext(x)
if (const SCEVZeroExtendExpr *SZ = dyn_cast<SCEVZeroExtendExpr>(Op))
return getZeroExtendExpr(SZ->getOperand(), Ty);
// Before doing any expensive analysis, check to see if we've already
// computed a SCEV for this Op and Ty.
FoldingSetNodeID ID;
ID.AddInteger(scSignExtend);
ID.AddPointer(Op);
ID.AddPointer(Ty);
void *IP = 0;
if (const SCEV *S = UniqueSCEVs.FindNodeOrInsertPos(ID, IP)) return S;
// If the input value is provably positive, build a zext instead.
if (isKnownNonNegative(Op))
return getZeroExtendExpr(Op, Ty);
// sext(trunc(x)) --> sext(x) or x or trunc(x)
if (const SCEVTruncateExpr *ST = dyn_cast<SCEVTruncateExpr>(Op)) {
// It's possible the bits taken off by the truncate were all sign bits. If
// so, we should be able to simplify this further.
const SCEV *X = ST->getOperand();
ConstantRange CR = getSignedRange(X);
unsigned TruncBits = getTypeSizeInBits(ST->getType());
unsigned NewBits = getTypeSizeInBits(Ty);
if (CR.truncate(TruncBits).signExtend(NewBits).contains(
CR.sextOrTrunc(NewBits)))
return getTruncateOrSignExtend(X, Ty);
}
// If the input value is a chrec scev, and we can prove that the value
// did not overflow the old, smaller, value, we can sign extend all of the
// operands (often constants). This allows analysis of something like
// this: for (signed char X = 0; X < 100; ++X) { int Y = X; }
if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(Op))
if (AR->isAffine()) {
const SCEV *Start = AR->getStart();
const SCEV *Step = AR->getStepRecurrence(*this);
unsigned BitWidth = getTypeSizeInBits(AR->getType());
const Loop *L = AR->getLoop();
// If we have special knowledge that this addrec won't overflow,
// we don't need to do any further analysis.
if (AR->getNoWrapFlags(SCEV::FlagNSW))
return getAddRecExpr(getSignExtendAddRecStart(AR, Ty, this),
getSignExtendExpr(Step, Ty),
L, SCEV::FlagNSW);
// Check whether the backedge-taken count is SCEVCouldNotCompute.
// Note that this serves two purposes: It filters out loops that are
// simply not analyzable, and it covers the case where this code is
// being called from within backedge-taken count analysis, such that
// attempting to ask for the backedge-taken count would likely result
// in infinite recursion. In the later case, the analysis code will
// cope with a conservative value, and it will take care to purge
// that value once it has finished.
const SCEV *MaxBECount = getMaxBackedgeTakenCount(L);
if (!isa<SCEVCouldNotCompute>(MaxBECount)) {
// Manually compute the final value for AR, checking for
// overflow.
// Check whether the backedge-taken count can be losslessly casted to
// the addrec's type. The count is always unsigned.
const SCEV *CastedMaxBECount =
getTruncateOrZeroExtend(MaxBECount, Start->getType());
const SCEV *RecastedMaxBECount =
getTruncateOrZeroExtend(CastedMaxBECount, MaxBECount->getType());
if (MaxBECount == RecastedMaxBECount) {
Type *WideTy = IntegerType::get(getContext(), BitWidth * 2);
// Check whether Start+Step*MaxBECount has no signed overflow.
const SCEV *SMul = getMulExpr(CastedMaxBECount, Step);
const SCEV *Add = getAddExpr(Start, SMul);
const SCEV *OperandExtendedAdd =
getAddExpr(getSignExtendExpr(Start, WideTy),
getMulExpr(getZeroExtendExpr(CastedMaxBECount, WideTy),
getSignExtendExpr(Step, WideTy)));
if (getSignExtendExpr(Add, WideTy) == OperandExtendedAdd) {
// Cache knowledge of AR NSW, which is propagated to this AddRec.
const_cast<SCEVAddRecExpr *>(AR)->setNoWrapFlags(SCEV::FlagNSW);
// Return the expression with the addrec on the outside.
return getAddRecExpr(getSignExtendAddRecStart(AR, Ty, this),
getSignExtendExpr(Step, Ty),
L, AR->getNoWrapFlags());
}
// Similar to above, only this time treat the step value as unsigned.
// This covers loops that count up with an unsigned step.
const SCEV *UMul = getMulExpr(CastedMaxBECount, Step);
Add = getAddExpr(Start, UMul);
OperandExtendedAdd =
getAddExpr(getSignExtendExpr(Start, WideTy),
getMulExpr(getZeroExtendExpr(CastedMaxBECount, WideTy),
getZeroExtendExpr(Step, WideTy)));
if (getSignExtendExpr(Add, WideTy) == OperandExtendedAdd) {
// Cache knowledge of AR NSW, which is propagated to this AddRec.
const_cast<SCEVAddRecExpr *>(AR)->setNoWrapFlags(SCEV::FlagNSW);
// Return the expression with the addrec on the outside.
return getAddRecExpr(getSignExtendAddRecStart(AR, Ty, this),
getZeroExtendExpr(Step, Ty),
L, AR->getNoWrapFlags());
}
}
// If the backedge is guarded by a comparison with the pre-inc value
// the addrec is safe. Also, if the entry is guarded by a comparison
// with the start value and the backedge is guarded by a comparison
// with the post-inc value, the addrec is safe.
ICmpInst::Predicate Pred;
const SCEV *OverflowLimit = getOverflowLimitForStep(Step, &Pred, this);
if (OverflowLimit &&
(isLoopBackedgeGuardedByCond(L, Pred, AR, OverflowLimit) ||
(isLoopEntryGuardedByCond(L, Pred, Start, OverflowLimit) &&
isLoopBackedgeGuardedByCond(L, Pred, AR->getPostIncExpr(*this),
OverflowLimit)))) {
// Cache knowledge of AR NSW, then propagate NSW to the wide AddRec.
const_cast<SCEVAddRecExpr *>(AR)->setNoWrapFlags(SCEV::FlagNSW);
return getAddRecExpr(getSignExtendAddRecStart(AR, Ty, this),
getSignExtendExpr(Step, Ty),
L, AR->getNoWrapFlags());
}
}
}
// The cast wasn't folded; create an explicit cast node.
// Recompute the insert position, as it may have been invalidated.
if (const SCEV *S = UniqueSCEVs.FindNodeOrInsertPos(ID, IP)) return S;
SCEV *S = new (SCEVAllocator) SCEVSignExtendExpr(ID.Intern(SCEVAllocator),
Op, Ty);
UniqueSCEVs.InsertNode(S, IP);
return S;
}
/// getAnyExtendExpr - Return a SCEV for the given operand extended with
/// unspecified bits out to the given type.
///
const SCEV *ScalarEvolution::getAnyExtendExpr(const SCEV *Op,
Type *Ty) {
assert(getTypeSizeInBits(Op->getType()) < getTypeSizeInBits(Ty) &&
"This is not an extending conversion!");
assert(isSCEVable(Ty) &&
"This is not a conversion to a SCEVable type!");
Ty = getEffectiveSCEVType(Ty);
// Sign-extend negative constants.
if (const SCEVConstant *SC = dyn_cast<SCEVConstant>(Op))
if (SC->getValue()->getValue().isNegative())
return getSignExtendExpr(Op, Ty);
// Peel off a truncate cast.
if (const SCEVTruncateExpr *T = dyn_cast<SCEVTruncateExpr>(Op)) {
const SCEV *NewOp = T->getOperand();
if (getTypeSizeInBits(NewOp->getType()) < getTypeSizeInBits(Ty))
return getAnyExtendExpr(NewOp, Ty);
return getTruncateOrNoop(NewOp, Ty);
}
// Next try a zext cast. If the cast is folded, use it.
const SCEV *ZExt = getZeroExtendExpr(Op, Ty);
if (!isa<SCEVZeroExtendExpr>(ZExt))
return ZExt;
// Next try a sext cast. If the cast is folded, use it.
const SCEV *SExt = getSignExtendExpr(Op, Ty);
if (!isa<SCEVSignExtendExpr>(SExt))
return SExt;
// Force the cast to be folded into the operands of an addrec.
if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(Op)) {
SmallVector<const SCEV *, 4> Ops;
for (SCEVAddRecExpr::op_iterator I = AR->op_begin(), E = AR->op_end();
I != E; ++I)
Ops.push_back(getAnyExtendExpr(*I, Ty));
return getAddRecExpr(Ops, AR->getLoop(), SCEV::FlagNW);
}
// As a special case, fold anyext(undef) to undef. We don't want to
// know too much about SCEVUnknowns, but this special case is handy
// and harmless.
if (const SCEVUnknown *U = dyn_cast<SCEVUnknown>(Op))
if (isa<UndefValue>(U->getValue()))
return getSCEV(UndefValue::get(Ty));
// If the expression is obviously signed, use the sext cast value.
if (isa<SCEVSMaxExpr>(Op))
return SExt;
// Absent any other information, use the zext cast value.
return ZExt;
}
/// CollectAddOperandsWithScales - Process the given Ops list, which is
/// a list of operands to be added under the given scale, update the given
/// map. This is a helper function for getAddRecExpr. As an example of
/// what it does, given a sequence of operands that would form an add
/// expression like this:
///
/// m + n + 13 + (A * (o + p + (B * q + m + 29))) + r + (-1 * r)
///
/// where A and B are constants, update the map with these values:
///
/// (m, 1+A*B), (n, 1), (o, A), (p, A), (q, A*B), (r, 0)
///
/// and add 13 + A*B*29 to AccumulatedConstant.
/// This will allow getAddRecExpr to produce this:
///
/// 13+A*B*29 + n + (m * (1+A*B)) + ((o + p) * A) + (q * A*B)
///
/// This form often exposes folding opportunities that are hidden in
/// the original operand list.
///
/// Return true iff it appears that any interesting folding opportunities
/// may be exposed. This helps getAddRecExpr short-circuit extra work in
/// the common case where no interesting opportunities are present, and
/// is also used as a check to avoid infinite recursion.
///
static bool
CollectAddOperandsWithScales(DenseMap<const SCEV *, APInt> &M,
SmallVector<const SCEV *, 8> &NewOps,
APInt &AccumulatedConstant,
const SCEV *const *Ops, size_t NumOperands,
const APInt &Scale,
ScalarEvolution &SE) {
bool Interesting = false;
// Iterate over the add operands. They are sorted, with constants first.
unsigned i = 0;
while (const SCEVConstant *C = dyn_cast<SCEVConstant>(Ops[i])) {
++i;
// Pull a buried constant out to the outside.
if (Scale != 1 || AccumulatedConstant != 0 || C->getValue()->isZero())
Interesting = true;
AccumulatedConstant += Scale * C->getValue()->getValue();
}
// Next comes everything else. We're especially interested in multiplies
// here, but they're in the middle, so just visit the rest with one loop.
for (; i != NumOperands; ++i) {
const SCEVMulExpr *Mul = dyn_cast<SCEVMulExpr>(Ops[i]);
if (Mul && isa<SCEVConstant>(Mul->getOperand(0))) {
APInt NewScale =
Scale * cast<SCEVConstant>(Mul->getOperand(0))->getValue()->getValue();
if (Mul->getNumOperands() == 2 && isa<SCEVAddExpr>(Mul->getOperand(1))) {
// A multiplication of a constant with another add; recurse.
const SCEVAddExpr *Add = cast<SCEVAddExpr>(Mul->getOperand(1));
Interesting |=
CollectAddOperandsWithScales(M, NewOps, AccumulatedConstant,
Add->op_begin(), Add->getNumOperands(),
NewScale, SE);
} else {
// A multiplication of a constant with some other value. Update
// the map.
SmallVector<const SCEV *, 4> MulOps(Mul->op_begin()+1, Mul->op_end());
const SCEV *Key = SE.getMulExpr(MulOps);
std::pair<DenseMap<const SCEV *, APInt>::iterator, bool> Pair =
M.insert(std::make_pair(Key, NewScale));
if (Pair.second) {
NewOps.push_back(Pair.first->first);
} else {
Pair.first->second += NewScale;
// The map already had an entry for this value, which may indicate
// a folding opportunity.
Interesting = true;
}
}
} else {
// An ordinary operand. Update the map.
std::pair<DenseMap<const SCEV *, APInt>::iterator, bool> Pair =
M.insert(std::make_pair(Ops[i], Scale));
if (Pair.second) {
NewOps.push_back(Pair.first->first);
} else {
Pair.first->second += Scale;
// The map already had an entry for this value, which may indicate
// a folding opportunity.
Interesting = true;
}
}
}
return Interesting;
}
namespace {
struct APIntCompare {
bool operator()(const APInt &LHS, const APInt &RHS) const {
return LHS.ult(RHS);
}
};
}
/// getAddExpr - Get a canonical add expression, or something simpler if
/// possible.
const SCEV *ScalarEvolution::getAddExpr(SmallVectorImpl<const SCEV *> &Ops,
SCEV::NoWrapFlags Flags) {
assert(!(Flags & ~(SCEV::FlagNUW | SCEV::FlagNSW)) &&
"only nuw or nsw allowed");
assert(!Ops.empty() && "Cannot get empty add!");
if (Ops.size() == 1) return Ops[0];
#ifndef NDEBUG
Type *ETy = getEffectiveSCEVType(Ops[0]->getType());
for (unsigned i = 1, e = Ops.size(); i != e; ++i)
assert(getEffectiveSCEVType(Ops[i]->getType()) == ETy &&
"SCEVAddExpr operand types don't match!");
#endif
// If FlagNSW is true and all the operands are non-negative, infer FlagNUW.
// And vice-versa.
int SignOrUnsignMask = SCEV::FlagNUW | SCEV::FlagNSW;
SCEV::NoWrapFlags SignOrUnsignWrap = maskFlags(Flags, SignOrUnsignMask);
if (SignOrUnsignWrap && (SignOrUnsignWrap != SignOrUnsignMask)) {
bool All = true;
for (SmallVectorImpl<const SCEV *>::const_iterator I = Ops.begin(),
E = Ops.end(); I != E; ++I)
if (!isKnownNonNegative(*I)) {
All = false;
break;
}
if (All) Flags = setFlags(Flags, (SCEV::NoWrapFlags)SignOrUnsignMask);
}
// Sort by complexity, this groups all similar expression types together.
GroupByComplexity(Ops, LI);
// If there are any constants, fold them together.
unsigned Idx = 0;
if (const SCEVConstant *LHSC = dyn_cast<SCEVConstant>(Ops[0])) {
++Idx;
assert(Idx < Ops.size());
while (const SCEVConstant *RHSC = dyn_cast<SCEVConstant>(Ops[Idx])) {
// We found two constants, fold them together!
Ops[0] = getConstant(LHSC->getValue()->getValue() +
RHSC->getValue()->getValue());
if (Ops.size() == 2) return Ops[0];
Ops.erase(Ops.begin()+1); // Erase the folded element
LHSC = cast<SCEVConstant>(Ops[0]);
}
// If we are left with a constant zero being added, strip it off.
if (LHSC->getValue()->isZero()) {
Ops.erase(Ops.begin());
--Idx;
}
if (Ops.size() == 1) return Ops[0];
}
// Okay, check to see if the same value occurs in the operand list more than
// once. If so, merge them together into an multiply expression. Since we
// sorted the list, these values are required to be adjacent.
Type *Ty = Ops[0]->getType();
bool FoundMatch = false;
for (unsigned i = 0, e = Ops.size(); i != e-1; ++i)
if (Ops[i] == Ops[i+1]) { // X + Y + Y --> X + Y*2
// Scan ahead to count how many equal operands there are.
unsigned Count = 2;
while (i+Count != e && Ops[i+Count] == Ops[i])
++Count;
// Merge the values into a multiply.
const SCEV *Scale = getConstant(Ty, Count);
const SCEV *Mul = getMulExpr(Scale, Ops[i]);
if (Ops.size() == Count)
return Mul;
Ops[i] = Mul;
Ops.erase(Ops.begin()+i+1, Ops.begin()+i+Count);
--i; e -= Count - 1;
FoundMatch = true;
}
if (FoundMatch)
return getAddExpr(Ops, Flags);
// Check for truncates. If all the operands are truncated from the same
// type, see if factoring out the truncate would permit the result to be
// folded. eg., trunc(x) + m*trunc(n) --> trunc(x + trunc(m)*n)
// if the contents of the resulting outer trunc fold to something simple.
for (; Idx < Ops.size() && isa<SCEVTruncateExpr>(Ops[Idx]); ++Idx) {
const SCEVTruncateExpr *Trunc = cast<SCEVTruncateExpr>(Ops[Idx]);
Type *DstType = Trunc->getType();
Type *SrcType = Trunc->getOperand()->getType();
SmallVector<const SCEV *, 8> LargeOps;
bool Ok = true;
// Check all the operands to see if they can be represented in the
// source type of the truncate.
for (unsigned i = 0, e = Ops.size(); i != e; ++i) {
if (const SCEVTruncateExpr *T = dyn_cast<SCEVTruncateExpr>(Ops[i])) {
if (T->getOperand()->getType() != SrcType) {
Ok = false;
break;
}
LargeOps.push_back(T->getOperand());
} else if (const SCEVConstant *C = dyn_cast<SCEVConstant>(Ops[i])) {
LargeOps.push_back(getAnyExtendExpr(C, SrcType));
} else if (const SCEVMulExpr *M = dyn_cast<SCEVMulExpr>(Ops[i])) {
SmallVector<const SCEV *, 8> LargeMulOps;
for (unsigned j = 0, f = M->getNumOperands(); j != f && Ok; ++j) {
if (const SCEVTruncateExpr *T =
dyn_cast<SCEVTruncateExpr>(M->getOperand(j))) {
if (T->getOperand()->getType() != SrcType) {
Ok = false;
break;
}
LargeMulOps.push_back(T->getOperand());
} else if (const SCEVConstant *C =
dyn_cast<SCEVConstant>(M->getOperand(j))) {
LargeMulOps.push_back(getAnyExtendExpr(C, SrcType));
} else {
Ok = false;
break;
}
}
if (Ok)
LargeOps.push_back(getMulExpr(LargeMulOps));
} else {
Ok = false;
break;
}
}
if (Ok) {
// Evaluate the expression in the larger type.
const SCEV *Fold = getAddExpr(LargeOps, Flags);
// If it folds to something simple, use it. Otherwise, don't.
if (isa<SCEVConstant>(Fold) || isa<SCEVUnknown>(Fold))
return getTruncateExpr(Fold, DstType);
}
}
// Skip past any other cast SCEVs.
while (Idx < Ops.size() && Ops[Idx]->getSCEVType() < scAddExpr)
++Idx;
// If there are add operands they would be next.
if (Idx < Ops.size()) {
bool DeletedAdd = false;
while (const SCEVAddExpr *Add = dyn_cast<SCEVAddExpr>(Ops[Idx])) {
// If we have an add, expand the add operands onto the end of the operands
// list.
Ops.erase(Ops.begin()+Idx);
Ops.append(Add->op_begin(), Add->op_end());
DeletedAdd = true;
}
// If we deleted at least one add, we added operands to the end of the list,
// and they are not necessarily sorted. Recurse to resort and resimplify
// any operands we just acquired.
if (DeletedAdd)
return getAddExpr(Ops);
}
// Skip over the add expression until we get to a multiply.
while (Idx < Ops.size() && Ops[Idx]->getSCEVType() < scMulExpr)
++Idx;
// Check to see if there are any folding opportunities present with
// operands multiplied by constant values.
if (Idx < Ops.size() && isa<SCEVMulExpr>(Ops[Idx])) {
uint64_t BitWidth = getTypeSizeInBits(Ty);
DenseMap<const SCEV *, APInt> M;
SmallVector<const SCEV *, 8> NewOps;
APInt AccumulatedConstant(BitWidth, 0);
if (CollectAddOperandsWithScales(M, NewOps, AccumulatedConstant,
Ops.data(), Ops.size(),
APInt(BitWidth, 1), *this)) {
// Some interesting folding opportunity is present, so its worthwhile to
// re-generate the operands list. Group the operands by constant scale,
// to avoid multiplying by the same constant scale multiple times.
std::map<APInt, SmallVector<const SCEV *, 4>, APIntCompare> MulOpLists;
for (SmallVector<const SCEV *, 8>::const_iterator I = NewOps.begin(),
E = NewOps.end(); I != E; ++I)
MulOpLists[M.find(*I)->second].push_back(*I);
// Re-generate the operands list.
Ops.clear();
if (AccumulatedConstant != 0)
Ops.push_back(getConstant(AccumulatedConstant));
for (std::map<APInt, SmallVector<const SCEV *, 4>, APIntCompare>::iterator
I = MulOpLists.begin(), E = MulOpLists.end(); I != E; ++I)
if (I->first != 0)
Ops.push_back(getMulExpr(getConstant(I->first),
getAddExpr(I->second)));
if (Ops.empty())
return getConstant(Ty, 0);
if (Ops.size() == 1)
return Ops[0];
return getAddExpr(Ops);
}
}
// If we are adding something to a multiply expression, make sure the
// something is not already an operand of the multiply. If so, merge it into
// the multiply.
for (; Idx < Ops.size() && isa<SCEVMulExpr>(Ops[Idx]); ++Idx) {
const SCEVMulExpr *Mul = cast<SCEVMulExpr>(Ops[Idx]);
for (unsigned MulOp = 0, e = Mul->getNumOperands(); MulOp != e; ++MulOp) {
const SCEV *MulOpSCEV = Mul->getOperand(MulOp);
if (isa<SCEVConstant>(MulOpSCEV))
continue;
for (unsigned AddOp = 0, e = Ops.size(); AddOp != e; ++AddOp)
if (MulOpSCEV == Ops[AddOp]) {
// Fold W + X + (X * Y * Z) --> W + (X * ((Y*Z)+1))
const SCEV *InnerMul = Mul->getOperand(MulOp == 0);
if (Mul->getNumOperands() != 2) {
// If the multiply has more than two operands, we must get the
// Y*Z term.
SmallVector<const SCEV *, 4> MulOps(Mul->op_begin(),
Mul->op_begin()+MulOp);
MulOps.append(Mul->op_begin()+MulOp+1, Mul->op_end());
InnerMul = getMulExpr(MulOps);
}
const SCEV *One = getConstant(Ty, 1);
const SCEV *AddOne = getAddExpr(One, InnerMul);
const SCEV *OuterMul = getMulExpr(AddOne, MulOpSCEV);
if (Ops.size() == 2) return OuterMul;
if (AddOp < Idx) {
Ops.erase(Ops.begin()+AddOp);
Ops.erase(Ops.begin()+Idx-1);
} else {
Ops.erase(Ops.begin()+Idx);
Ops.erase(Ops.begin()+AddOp-1);
}
Ops.push_back(OuterMul);
return getAddExpr(Ops);
}
// Check this multiply against other multiplies being added together.
for (unsigned OtherMulIdx = Idx+1;
OtherMulIdx < Ops.size() && isa<SCEVMulExpr>(Ops[OtherMulIdx]);
++OtherMulIdx) {
const SCEVMulExpr *OtherMul = cast<SCEVMulExpr>(Ops[OtherMulIdx]);
// If MulOp occurs in OtherMul, we can fold the two multiplies
// together.
for (unsigned OMulOp = 0, e = OtherMul->getNumOperands();
OMulOp != e; ++OMulOp)
if (OtherMul->getOperand(OMulOp) == MulOpSCEV) {
// Fold X + (A*B*C) + (A*D*E) --> X + (A*(B*C+D*E))
const SCEV *InnerMul1 = Mul->getOperand(MulOp == 0);
if (Mul->getNumOperands() != 2) {
SmallVector<const SCEV *, 4> MulOps(Mul->op_begin(),
Mul->op_begin()+MulOp);
MulOps.append(Mul->op_begin()+MulOp+1, Mul->op_end());
InnerMul1 = getMulExpr(MulOps);
}
const SCEV *InnerMul2 = OtherMul->getOperand(OMulOp == 0);
if (OtherMul->getNumOperands() != 2) {
SmallVector<const SCEV *, 4> MulOps(OtherMul->op_begin(),
OtherMul->op_begin()+OMulOp);
MulOps.append(OtherMul->op_begin()+OMulOp+1, OtherMul->op_end());
InnerMul2 = getMulExpr(MulOps);
}
const SCEV *InnerMulSum = getAddExpr(InnerMul1,InnerMul2);
const SCEV *OuterMul = getMulExpr(MulOpSCEV, InnerMulSum);
if (Ops.size() == 2) return OuterMul;
Ops.erase(Ops.begin()+Idx);
Ops.erase(Ops.begin()+OtherMulIdx-1);
Ops.push_back(OuterMul);
return getAddExpr(Ops);
}
}
}
}
// If there are any add recurrences in the operands list, see if any other
// added values are loop invariant. If so, we can fold them into the
// recurrence.
while (Idx < Ops.size() && Ops[Idx]->getSCEVType() < scAddRecExpr)
++Idx;
// Scan over all recurrences, trying to fold loop invariants into them.
for (; Idx < Ops.size() && isa<SCEVAddRecExpr>(Ops[Idx]); ++Idx) {
// Scan all of the other operands to this add and add them to the vector if
// they are loop invariant w.r.t. the recurrence.
SmallVector<const SCEV *, 8> LIOps;
const SCEVAddRecExpr *AddRec = cast<SCEVAddRecExpr>(Ops[Idx]);
const Loop *AddRecLoop = AddRec->getLoop();
for (unsigned i = 0, e = Ops.size(); i != e; ++i)
if (isLoopInvariant(Ops[i], AddRecLoop)) {
LIOps.push_back(Ops[i]);
Ops.erase(Ops.begin()+i);
--i; --e;
}
// If we found some loop invariants, fold them into the recurrence.
if (!LIOps.empty()) {
// NLI + LI + {Start,+,Step} --> NLI + {LI+Start,+,Step}
LIOps.push_back(AddRec->getStart());
SmallVector<const SCEV *, 4> AddRecOps(AddRec->op_begin(),
AddRec->op_end());
AddRecOps[0] = getAddExpr(LIOps);
// Build the new addrec. Propagate the NUW and NSW flags if both the
// outer add and the inner addrec are guaranteed to have no overflow.
// Always propagate NW.
Flags = AddRec->getNoWrapFlags(setFlags(Flags, SCEV::FlagNW));
const SCEV *NewRec = getAddRecExpr(AddRecOps, AddRecLoop, Flags);
// If all of the other operands were loop invariant, we are done.
if (Ops.size() == 1) return NewRec;
// Otherwise, add the folded AddRec by the non-invariant parts.
for (unsigned i = 0;; ++i)
if (Ops[i] == AddRec) {
Ops[i] = NewRec;
break;
}
return getAddExpr(Ops);
}
// Okay, if there weren't any loop invariants to be folded, check to see if
// there are multiple AddRec's with the same loop induction variable being
// added together. If so, we can fold them.
for (unsigned OtherIdx = Idx+1;
OtherIdx < Ops.size() && isa<SCEVAddRecExpr>(Ops[OtherIdx]);
++OtherIdx)
if (AddRecLoop == cast<SCEVAddRecExpr>(Ops[OtherIdx])->getLoop()) {
// Other + {A,+,B}<L> + {C,+,D}<L> --> Other + {A+C,+,B+D}<L>
SmallVector<const SCEV *, 4> AddRecOps(AddRec->op_begin(),
AddRec->op_end());
for (; OtherIdx != Ops.size() && isa<SCEVAddRecExpr>(Ops[OtherIdx]);
++OtherIdx)
if (const SCEVAddRecExpr *OtherAddRec =
dyn_cast<SCEVAddRecExpr>(Ops[OtherIdx]))
if (OtherAddRec->getLoop() == AddRecLoop) {
for (unsigned i = 0, e = OtherAddRec->getNumOperands();
i != e; ++i) {
if (i >= AddRecOps.size()) {
AddRecOps.append(OtherAddRec->op_begin()+i,
OtherAddRec->op_end());
break;
}
AddRecOps[i] = getAddExpr(AddRecOps[i],
OtherAddRec->getOperand(i));
}
Ops.erase(Ops.begin() + OtherIdx); --OtherIdx;
}
// Step size has changed, so we cannot guarantee no self-wraparound.
Ops[Idx] = getAddRecExpr(AddRecOps, AddRecLoop, SCEV::FlagAnyWrap);
return getAddExpr(Ops);
}
// Otherwise couldn't fold anything into this recurrence. Move onto the
// next one.
}
// Okay, it looks like we really DO need an add expr. Check to see if we
// already have one, otherwise create a new one.
FoldingSetNodeID ID;
ID.AddInteger(scAddExpr);
for (unsigned i = 0, e = Ops.size(); i != e; ++i)
ID.AddPointer(Ops[i]);
void *IP = 0;
SCEVAddExpr *S =
static_cast<SCEVAddExpr *>(UniqueSCEVs.FindNodeOrInsertPos(ID, IP));
if (!S) {
const SCEV **O = SCEVAllocator.Allocate<const SCEV *>(Ops.size());
std::uninitialized_copy(Ops.begin(), Ops.end(), O);
S = new (SCEVAllocator) SCEVAddExpr(ID.Intern(SCEVAllocator),
O, Ops.size());
UniqueSCEVs.InsertNode(S, IP);
}
S->setNoWrapFlags(Flags);
return S;
}
static uint64_t umul_ov(uint64_t i, uint64_t j, bool &Overflow) {
uint64_t k = i*j;
if (j > 1 && k / j != i) Overflow = true;
return k;
}
/// Compute the result of "n choose k", the binomial coefficient. If an
/// intermediate computation overflows, Overflow will be set and the return will
/// be garbage. Overflow is not cleared on absense of overflow.
static uint64_t Choose(uint64_t n, uint64_t k, bool &Overflow) {
// We use the multiplicative formula:
// n(n-1)(n-2)...(n-(k-1)) / k(k-1)(k-2)...1 .
// At each iteration, we take the n-th term of the numeral and divide by the
// (k-n)th term of the denominator. This division will always produce an
// integral result, and helps reduce the chance of overflow in the
// intermediate computations. However, we can still overflow even when the
// final result would fit.
if (n == 0 || n == k) return 1;
if (k > n) return 0;
if (k > n/2)
k = n-k;
uint64_t r = 1;
for (uint64_t i = 1; i <= k; ++i) {
r = umul_ov(r, n-(i-1), Overflow);
r /= i;
}
return r;
}
/// getMulExpr - Get a canonical multiply expression, or something simpler if
/// possible.
const SCEV *ScalarEvolution::getMulExpr(SmallVectorImpl<const SCEV *> &Ops,
SCEV::NoWrapFlags Flags) {
assert(Flags == maskFlags(Flags, SCEV::FlagNUW | SCEV::FlagNSW) &&
"only nuw or nsw allowed");
assert(!Ops.empty() && "Cannot get empty mul!");
if (Ops.size() == 1) return Ops[0];
#ifndef NDEBUG
Type *ETy = getEffectiveSCEVType(Ops[0]->getType());
for (unsigned i = 1, e = Ops.size(); i != e; ++i)
assert(getEffectiveSCEVType(Ops[i]->getType()) == ETy &&
"SCEVMulExpr operand types don't match!");
#endif
// If FlagNSW is true and all the operands are non-negative, infer FlagNUW.
// And vice-versa.
int SignOrUnsignMask = SCEV::FlagNUW | SCEV::FlagNSW;
SCEV::NoWrapFlags SignOrUnsignWrap = maskFlags(Flags, SignOrUnsignMask);
if (SignOrUnsignWrap && (SignOrUnsignWrap != SignOrUnsignMask)) {
bool All = true;
for (SmallVectorImpl<const SCEV *>::const_iterator I = Ops.begin(),
E = Ops.end(); I != E; ++I)
if (!isKnownNonNegative(*I)) {
All = false;
break;
}
if (All) Flags = setFlags(Flags, (SCEV::NoWrapFlags)SignOrUnsignMask);
}
// Sort by complexity, this groups all similar expression types together.
GroupByComplexity(Ops, LI);
// If there are any constants, fold them together.
unsigned Idx = 0;
if (const SCEVConstant *LHSC = dyn_cast<SCEVConstant>(Ops[0])) {
// C1*(C2+V) -> C1*C2 + C1*V
if (Ops.size() == 2)
if (const SCEVAddExpr *Add = dyn_cast<SCEVAddExpr>(Ops[1]))
if (Add->getNumOperands() == 2 &&
isa<SCEVConstant>(Add->getOperand(0)))
return getAddExpr(getMulExpr(LHSC, Add->getOperand(0)),
getMulExpr(LHSC, Add->getOperand(1)));
++Idx;
while (const SCEVConstant *RHSC = dyn_cast<SCEVConstant>(Ops[Idx])) {
// We found two constants, fold them together!
ConstantInt *Fold = ConstantInt::get(getContext(),
LHSC->getValue()->getValue() *
RHSC->getValue()->getValue());
Ops[0] = getConstant(Fold);
Ops.erase(Ops.begin()+1); // Erase the folded element
if (Ops.size() == 1) return Ops[0];
LHSC = cast<SCEVConstant>(Ops[0]);
}
// If we are left with a constant one being multiplied, strip it off.
if (cast<SCEVConstant>(Ops[0])->getValue()->equalsInt(1)) {
Ops.erase(Ops.begin());
--Idx;
} else if (cast<SCEVConstant>(Ops[0])->getValue()->isZero()) {
// If we have a multiply of zero, it will always be zero.
return Ops[0];
} else if (Ops[0]->isAllOnesValue()) {
// If we have a mul by -1 of an add, try distributing the -1 among the
// add operands.
if (Ops.size() == 2) {
if (const SCEVAddExpr *Add = dyn_cast<SCEVAddExpr>(Ops[1])) {
SmallVector<const SCEV *, 4> NewOps;
bool AnyFolded = false;
for (SCEVAddRecExpr::op_iterator I = Add->op_begin(),
E = Add->op_end(); I != E; ++I) {
const SCEV *Mul = getMulExpr(Ops[0], *I);
if (!isa<SCEVMulExpr>(Mul)) AnyFolded = true;
NewOps.push_back(Mul);
}
if (AnyFolded)
return getAddExpr(NewOps);
}
else if (const SCEVAddRecExpr *
AddRec = dyn_cast<SCEVAddRecExpr>(Ops[1])) {
// Negation preserves a recurrence's no self-wrap property.
SmallVector<const SCEV *, 4> Operands;
for (SCEVAddRecExpr::op_iterator I = AddRec->op_begin(),
E = AddRec->op_end(); I != E; ++I) {
Operands.push_back(getMulExpr(Ops[0], *I));
}
return getAddRecExpr(Operands, AddRec->getLoop(),
AddRec->getNoWrapFlags(SCEV::FlagNW));
}
}
}
if (Ops.size() == 1)
return Ops[0];
}
// Skip over the add expression until we get to a multiply.
while (Idx < Ops.size() && Ops[Idx]->getSCEVType() < scMulExpr)
++Idx;
// If there are mul operands inline them all into this expression.
if (Idx < Ops.size()) {
bool DeletedMul = false;
while (const SCEVMulExpr *Mul = dyn_cast<SCEVMulExpr>(Ops[Idx])) {
// If we have an mul, expand the mul operands onto the end of the operands
// list.
Ops.erase(Ops.begin()+Idx);
Ops.append(Mul->op_begin(), Mul->op_end());
DeletedMul = true;
}
// If we deleted at least one mul, we added operands to the end of the list,
// and they are not necessarily sorted. Recurse to resort and resimplify
// any operands we just acquired.
if (DeletedMul)
return getMulExpr(Ops);
}
// If there are any add recurrences in the operands list, see if any other
// added values are loop invariant. If so, we can fold them into the
// recurrence.
while (Idx < Ops.size() && Ops[Idx]->getSCEVType() < scAddRecExpr)
++Idx;
// Scan over all recurrences, trying to fold loop invariants into them.
for (; Idx < Ops.size() && isa<SCEVAddRecExpr>(Ops[Idx]); ++Idx) {
// Scan all of the other operands to this mul and add them to the vector if
// they are loop invariant w.r.t. the recurrence.
SmallVector<const SCEV *, 8> LIOps;
const SCEVAddRecExpr *AddRec = cast<SCEVAddRecExpr>(Ops[Idx]);
const Loop *AddRecLoop = AddRec->getLoop();
for (unsigned i = 0, e = Ops.size(); i != e; ++i)
if (isLoopInvariant(Ops[i], AddRecLoop)) {
LIOps.push_back(Ops[i]);
Ops.erase(Ops.begin()+i);
--i; --e;
}
// If we found some loop invariants, fold them into the recurrence.
if (!LIOps.empty()) {
// NLI * LI * {Start,+,Step} --> NLI * {LI*Start,+,LI*Step}
SmallVector<const SCEV *, 4> NewOps;
NewOps.reserve(AddRec->getNumOperands());
const SCEV *Scale = getMulExpr(LIOps);
for (unsigned i = 0, e = AddRec->getNumOperands(); i != e; ++i)
NewOps.push_back(getMulExpr(Scale, AddRec->getOperand(i)));
// Build the new addrec. Propagate the NUW and NSW flags if both the
// outer mul and the inner addrec are guaranteed to have no overflow.
//
// No self-wrap cannot be guaranteed after changing the step size, but
// will be inferred if either NUW or NSW is true.
Flags = AddRec->getNoWrapFlags(clearFlags(Flags, SCEV::FlagNW));
const SCEV *NewRec = getAddRecExpr(NewOps, AddRecLoop, Flags);
// If all of the other operands were loop invariant, we are done.
if (Ops.size() == 1) return NewRec;
// Otherwise, multiply the folded AddRec by the non-invariant parts.
for (unsigned i = 0;; ++i)
if (Ops[i] == AddRec) {
Ops[i] = NewRec;
break;
}
return getMulExpr(Ops);
}
// Okay, if there weren't any loop invariants to be folded, check to see if
// there are multiple AddRec's with the same loop induction variable being
// multiplied together. If so, we can fold them.
for (unsigned OtherIdx = Idx+1;
OtherIdx < Ops.size() && isa<SCEVAddRecExpr>(Ops[OtherIdx]);
++OtherIdx) {
if (AddRecLoop == cast<SCEVAddRecExpr>(Ops[OtherIdx])->getLoop()) {
// {A1,+,A2,+,...,+,An}<L> * {B1,+,B2,+,...,+,Bn}<L>
// = {x=1 in [ sum y=x..2x [ sum z=max(y-x, y-n)..min(x,n) [
// choose(x, 2x)*choose(2x-y, x-z)*A_{y-z}*B_z
// ]]],+,...up to x=2n}.
// Note that the arguments to choose() are always integers with values
// known at compile time, never SCEV objects.
//
// The implementation avoids pointless extra computations when the two
// addrec's are of different length (mathematically, it's equivalent to
// an infinite stream of zeros on the right).
bool OpsModified = false;
for (; OtherIdx != Ops.size() && isa<SCEVAddRecExpr>(Ops[OtherIdx]);
++OtherIdx)
if (const SCEVAddRecExpr *OtherAddRec =
dyn_cast<SCEVAddRecExpr>(Ops[OtherIdx]))
if (OtherAddRec->getLoop() == AddRecLoop) {
bool Overflow = false;
Type *Ty = AddRec->getType();
bool LargerThan64Bits = getTypeSizeInBits(Ty) > 64;
SmallVector<const SCEV*, 7> AddRecOps;
for (int x = 0, xe = AddRec->getNumOperands() +
OtherAddRec->getNumOperands() - 1;
x != xe && !Overflow; ++x) {
const SCEV *Term = getConstant(Ty, 0);
for (int y = x, ye = 2*x+1; y != ye && !Overflow; ++y) {
uint64_t Coeff1 = Choose(x, 2*x - y, Overflow);
for (int z = std::max(y-x, y-(int)AddRec->getNumOperands()+1),
ze = std::min(x+1, (int)OtherAddRec->getNumOperands());
z < ze && !Overflow; ++z) {
uint64_t Coeff2 = Choose(2*x - y, x-z, Overflow);
uint64_t Coeff;
if (LargerThan64Bits)
Coeff = umul_ov(Coeff1, Coeff2, Overflow);
else
Coeff = Coeff1*Coeff2;
const SCEV *CoeffTerm = getConstant(Ty, Coeff);
const SCEV *Term1 = AddRec->getOperand(y-z);
const SCEV *Term2 = OtherAddRec->getOperand(z);
Term = getAddExpr(Term, getMulExpr(CoeffTerm, Term1,Term2));
}
}
AddRecOps.push_back(Term);
}
if (!Overflow) {
const SCEV *NewAddRec = getAddRecExpr(AddRecOps,
AddRec->getLoop(),
SCEV::FlagAnyWrap);
if (Ops.size() == 2) return NewAddRec;
Ops[Idx] = AddRec = cast<SCEVAddRecExpr>(NewAddRec);
Ops.erase(Ops.begin() + OtherIdx); --OtherIdx;
OpsModified = true;
}
}
if (OpsModified)
return getMulExpr(Ops);
}
}
// Otherwise couldn't fold anything into this recurrence. Move onto the
// next one.
}
// Okay, it looks like we really DO need an mul expr. Check to see if we
// already have one, otherwise create a new one.
FoldingSetNodeID ID;
ID.AddInteger(scMulExpr);
for (unsigned i = 0, e = Ops.size(); i != e; ++i)
ID.AddPointer(Ops[i]);
void *IP = 0;
SCEVMulExpr *S =
static_cast<SCEVMulExpr *>(UniqueSCEVs.FindNodeOrInsertPos(ID, IP));
if (!S) {
const SCEV **O = SCEVAllocator.Allocate<const SCEV *>(Ops.size());
std::uninitialized_copy(Ops.begin(), Ops.end(), O);
S = new (SCEVAllocator) SCEVMulExpr(ID.Intern(SCEVAllocator),
O, Ops.size());
UniqueSCEVs.InsertNode(S, IP);
}
S->setNoWrapFlags(Flags);
return S;
}
/// getUDivExpr - Get a canonical unsigned division expression, or something
/// simpler if possible.
const SCEV *ScalarEvolution::getUDivExpr(const SCEV *LHS,
const SCEV *RHS) {
assert(getEffectiveSCEVType(LHS->getType()) ==
getEffectiveSCEVType(RHS->getType()) &&
"SCEVUDivExpr operand types don't match!");
if (const SCEVConstant *RHSC = dyn_cast<SCEVConstant>(RHS)) {
if (RHSC->getValue()->equalsInt(1))
return LHS; // X udiv 1 --> x
// If the denominator is zero, the result of the udiv is undefined. Don't
// try to analyze it, because the resolution chosen here may differ from
// the resolution chosen in other parts of the compiler.
if (!RHSC->getValue()->isZero()) {
// Determine if the division can be folded into the operands of
// its operands.
// TODO: Generalize this to non-constants by using known-bits information.
Type *Ty = LHS->getType();
unsigned LZ = RHSC->getValue()->getValue().countLeadingZeros();
unsigned MaxShiftAmt = getTypeSizeInBits(Ty) - LZ - 1;
// For non-power-of-two values, effectively round the value up to the
// nearest power of two.
if (!RHSC->getValue()->getValue().isPowerOf2())
++MaxShiftAmt;
IntegerType *ExtTy =
IntegerType::get(getContext(), getTypeSizeInBits(Ty) + MaxShiftAmt);
if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(LHS))
if (const SCEVConstant *Step =
dyn_cast<SCEVConstant>(AR->getStepRecurrence(*this))) {
// {X,+,N}/C --> {X/C,+,N/C} if safe and N/C can be folded.
const APInt &StepInt = Step->getValue()->getValue();
const APInt &DivInt = RHSC->getValue()->getValue();
if (!StepInt.urem(DivInt) &&
getZeroExtendExpr(AR, ExtTy) ==
getAddRecExpr(getZeroExtendExpr(AR->getStart(), ExtTy),
getZeroExtendExpr(Step, ExtTy),
AR->getLoop(), SCEV::FlagAnyWrap)) {
SmallVector<const SCEV *, 4> Operands;
for (unsigned i = 0, e = AR->getNumOperands(); i != e; ++i)
Operands.push_back(getUDivExpr(AR->getOperand(i), RHS));
return getAddRecExpr(Operands, AR->getLoop(),
SCEV::FlagNW);
}
/// Get a canonical UDivExpr for a recurrence.
/// {X,+,N}/C => {Y,+,N}/C where Y=X-(X%N). Safe when C%N=0.
// We can currently only fold X%N if X is constant.
const SCEVConstant *StartC = dyn_cast<SCEVConstant>(AR->getStart());
if (StartC && !DivInt.urem(StepInt) &&
getZeroExtendExpr(AR, ExtTy) ==
getAddRecExpr(getZeroExtendExpr(AR->getStart(), ExtTy),
getZeroExtendExpr(Step, ExtTy),
AR->getLoop(), SCEV::FlagAnyWrap)) {
const APInt &StartInt = StartC->getValue()->getValue();
const APInt &StartRem = StartInt.urem(StepInt);
if (StartRem != 0)
LHS = getAddRecExpr(getConstant(StartInt - StartRem), Step,
AR->getLoop(), SCEV::FlagNW);
}
}
// (A*B)/C --> A*(B/C) if safe and B/C can be folded.
if (const SCEVMulExpr *M = dyn_cast<SCEVMulExpr>(LHS)) {
SmallVector<const SCEV *, 4> Operands;
for (unsigned i = 0, e = M->getNumOperands(); i != e; ++i)
Operands.push_back(getZeroExtendExpr(M->getOperand(i), ExtTy));
if (getZeroExtendExpr(M, ExtTy) == getMulExpr(Operands))
// Find an operand that's safely divisible.
for (unsigned i = 0, e = M->getNumOperands(); i != e; ++i) {
const SCEV *Op = M->getOperand(i);
const SCEV *Div = getUDivExpr(Op, RHSC);
if (!isa<SCEVUDivExpr>(Div) && getMulExpr(Div, RHSC) == Op) {
Operands = SmallVector<const SCEV *, 4>(M->op_begin(),
M->op_end());
Operands[i] = Div;
return getMulExpr(Operands);
}
}
}
// (A+B)/C --> (A/C + B/C) if safe and A/C and B/C can be folded.
if (const SCEVAddExpr *A = dyn_cast<SCEVAddExpr>(LHS)) {
SmallVector<const SCEV *, 4> Operands;
for (unsigned i = 0, e = A->getNumOperands(); i != e; ++i)
Operands.push_back(getZeroExtendExpr(A->getOperand(i), ExtTy));
if (getZeroExtendExpr(A, ExtTy) == getAddExpr(Operands)) {
Operands.clear();
for (unsigned i = 0, e = A->getNumOperands(); i != e; ++i) {
const SCEV *Op = getUDivExpr(A->getOperand(i), RHS);
if (isa<SCEVUDivExpr>(Op) ||
getMulExpr(Op, RHS) != A->getOperand(i))
break;
Operands.push_back(Op);
}
if (Operands.size() == A->getNumOperands())
return getAddExpr(Operands);
}
}
// Fold if both operands are constant.
if (const SCEVConstant *LHSC = dyn_cast<SCEVConstant>(LHS)) {
Constant *LHSCV = LHSC->getValue();
Constant *RHSCV = RHSC->getValue();
return getConstant(cast<ConstantInt>(ConstantExpr::getUDiv(LHSCV,
RHSCV)));
}
}
}
FoldingSetNodeID ID;
ID.AddInteger(scUDivExpr);
ID.AddPointer(LHS);
ID.AddPointer(RHS);
void *IP = 0;
if (const SCEV *S = UniqueSCEVs.FindNodeOrInsertPos(ID, IP)) return S;
SCEV *S = new (SCEVAllocator) SCEVUDivExpr(ID.Intern(SCEVAllocator),
LHS, RHS);
UniqueSCEVs.InsertNode(S, IP);
return S;
}
/// getAddRecExpr - Get an add recurrence expression for the specified loop.
/// Simplify the expression as much as possible.
const SCEV *ScalarEvolution::getAddRecExpr(const SCEV *Start, const SCEV *Step,
const Loop *L,
SCEV::NoWrapFlags Flags) {
SmallVector<const SCEV *, 4> Operands;
Operands.push_back(Start);
if (const SCEVAddRecExpr *StepChrec = dyn_cast<SCEVAddRecExpr>(Step))
if (StepChrec->getLoop() == L) {
Operands.append(StepChrec->op_begin(), StepChrec->op_end());
return getAddRecExpr(Operands, L, maskFlags(Flags, SCEV::FlagNW));
}
Operands.push_back(Step);
return getAddRecExpr(Operands, L, Flags);
}
/// getAddRecExpr - Get an add recurrence expression for the specified loop.
/// Simplify the expression as much as possible.
const SCEV *
ScalarEvolution::getAddRecExpr(SmallVectorImpl<const SCEV *> &Operands,
const Loop *L, SCEV::NoWrapFlags Flags) {
if (Operands.size() == 1) return Operands[0];
#ifndef NDEBUG
Type *ETy = getEffectiveSCEVType(Operands[0]->getType());
for (unsigned i = 1, e = Operands.size(); i != e; ++i)
assert(getEffectiveSCEVType(Operands[i]->getType()) == ETy &&
"SCEVAddRecExpr operand types don't match!");
for (unsigned i = 0, e = Operands.size(); i != e; ++i)
assert(isLoopInvariant(Operands[i], L) &&
"SCEVAddRecExpr operand is not loop-invariant!");
#endif
if (Operands.back()->isZero()) {
Operands.pop_back();
return getAddRecExpr(Operands, L, SCEV::FlagAnyWrap); // {X,+,0} --> X
}
// It's tempting to want to call getMaxBackedgeTakenCount count here and
// use that information to infer NUW and NSW flags. However, computing a
// BE count requires calling getAddRecExpr, so we may not yet have a
// meaningful BE count at this point (and if we don't, we'd be stuck
// with a SCEVCouldNotCompute as the cached BE count).
// If FlagNSW is true and all the operands are non-negative, infer FlagNUW.
// And vice-versa.
int SignOrUnsignMask = SCEV::FlagNUW | SCEV::FlagNSW;
SCEV::NoWrapFlags SignOrUnsignWrap = maskFlags(Flags, SignOrUnsignMask);
if (SignOrUnsignWrap && (SignOrUnsignWrap != SignOrUnsignMask)) {
bool All = true;
for (SmallVectorImpl<const SCEV *>::const_iterator I = Operands.begin(),
E = Operands.end(); I != E; ++I)
if (!isKnownNonNegative(*I)) {
All = false;
break;
}
if (All) Flags = setFlags(Flags, (SCEV::NoWrapFlags)SignOrUnsignMask);
}
// Canonicalize nested AddRecs in by nesting them in order of loop depth.
if (const SCEVAddRecExpr *NestedAR = dyn_cast<SCEVAddRecExpr>(Operands[0])) {
const Loop *NestedLoop = NestedAR->getLoop();
if (L->contains(NestedLoop) ?
(L->getLoopDepth() < NestedLoop->getLoopDepth()) :
(!NestedLoop->contains(L) &&
DT->dominates(L->getHeader(), NestedLoop->getHeader()))) {
SmallVector<const SCEV *, 4> NestedOperands(NestedAR->op_begin(),
NestedAR->op_end());
Operands[0] = NestedAR->getStart();
// AddRecs require their operands be loop-invariant with respect to their
// loops. Don't perform this transformation if it would break this
// requirement.
bool AllInvariant = true;
for (unsigned i = 0, e = Operands.size(); i != e; ++i)
if (!isLoopInvariant(Operands[i], L)) {
AllInvariant = false;
break;
}
if (AllInvariant) {
// Create a recurrence for the outer loop with the same step size.
//
// The outer recurrence keeps its NW flag but only keeps NUW/NSW if the
// inner recurrence has the same property.